-
Stochastic modeling of a neutron imaging center at the Brazilian Multipurpose Reactor
Authors:
Luiz P. de Oliveira,
Alexandre P. S. Souza,
Frederico A. Genezini,
Adimir dos Santos
Abstract:
Neutron imaging is a non-destructive technique for analyzing a wide class of samples, such as archaeological or industrial material structures. In recent decades, technological advances have had a great impact on the neutron imaging technique, which has meant an evolution from simple radiographs using films (2D) to modern tomography systems with digital processing (3D). The 5 MW research nuclear r…
▽ More
Neutron imaging is a non-destructive technique for analyzing a wide class of samples, such as archaeological or industrial material structures. In recent decades, technological advances have had a great impact on the neutron imaging technique, which has meant an evolution from simple radiographs using films (2D) to modern tomography systems with digital processing (3D). The 5 MW research nuclear reactor IEA-R1, which is located at the Instituto de Pesquisas Energéticas e Nucleares (IPEN) in Brazil, possesses a neutron imaging instrument with $1.0 \times 10^{6}$ $n/cm^{2}s$ in the sample position. IEA-R1 is over 60 years old and the future of neutron science in Brazil, including imaging, will be expanded to a new facility called the Brazilian Multipurpose Reactor (RMB, Portuguese acronym), which will be built soon. The new reactor will house a suite of instruments at the Neutron National Laboratory, including the neutron imaging facility, viz., Neinei. Inspired by recent author's works, we model the Neinei instrument through stochastic Monte Carlo simulations. We investigate the sensitivity of the neutron imaging technique parameter ($L/D$ ratio) with the neutron flux, and the results are compared to data from the Neutra (PSI), Antares (FRM II), BT2 (NIST) and DINGO (OPAL) instruments. The results are promising and provide avenues for future improvements.
△ Less
Submitted 21 February, 2024; v1 submitted 15 August, 2022;
originally announced August 2022.
-
Simulating Araponga -- The High-Resolution Diffractometer of Brazilian Multipurpose Reactor
Authors:
Alexandre P. S. Souza,
Luiz P. de Oliveira,
Frederico A. Genezini,
Adimir dos Santos
Abstract:
The Brazilian Multipurpose Reactor (RMB) is a fundamental project that aims to turn Brazil into a self-sufficient country in the production of radioisotopes and radiopharmaceuticals to supply the Unified Health System (SUS) as much as the private institutions. In addition, the RMB project describes other applications as irradiation and testing of nuclear fuels and structural material analysis, for…
▽ More
The Brazilian Multipurpose Reactor (RMB) is a fundamental project that aims to turn Brazil into a self-sufficient country in the production of radioisotopes and radiopharmaceuticals to supply the Unified Health System (SUS) as much as the private institutions. In addition, the RMB project describes other applications as irradiation and testing of nuclear fuels and structural material analysis, for instance. There are many techniques in the project to study structural aspects of materials, where neutron diffraction represents one of the priorities for implementation. This technique will take place mainly on two diffractometers on Thermal Neutron Guide 1 (TG1), namely Araponga, a high-resolution diffractometer, and Flautim, a high-intensity diffractometer. In this work, we study the performance of the Araponga diffractometer through McStas simulations with input produced by the MCNP code of the RMB core. We investigate the neutron flux values considering a state-of-art high-resolution diffractometer, and the results are promising since some simulated scenarios present values compatible with high-intensity devices.
△ Less
Submitted 28 December, 2022; v1 submitted 27 March, 2022;
originally announced March 2022.
-
Monte Carlo simulations of the S-shaped neutron guides with asymmetric concave and convex surface coatings
Authors:
Alexandre P. S. Souza,
Luiz P. de Oliveira,
Frederico A. Genezini
Abstract:
During the last decades, neutron beam transportation has been a well-known and established subject for designing proper neutron guides. However, sometimes unusual adaptation or adjustments are required out of original projects and after operation beginning of facilities. Inter-center transferring of instrument locations also requires a new approach that is not necessarily described in the literatu…
▽ More
During the last decades, neutron beam transportation has been a well-known and established subject for designing proper neutron guides. However, sometimes unusual adaptation or adjustments are required out of original projects and after operation beginning of facilities. Inter-center transferring of instrument locations also requires a new approach that is not necessarily described in the literature. Inside these situations, the use of S-shaped guides has not been fully discussed in the literature. From a geometrical analysis, we develop a formalism of construction of a minimal S-shaped guide by only considering the exclusion of the Line-of-Sight. We study this guide model through the wavelength cutoff and the neutron transport efficiency analysis. Here, Monte Carlo simulations using MCSTAS software are applied. By intending to optimize these guide systems, simulations of this study also consider scenarios that have different supermirrors. A formalism to determine wavelength cutoff for unique and variable index guide systems is also developed. Simulation results show a good agreement between theoretical and simulated wavelength cutoff values. In addition, we have found specific configurations that combine efficient neutron transport and lower index values on the convex surfaces of curved guides that form the S-shaped guide.
△ Less
Submitted 8 October, 2021; v1 submitted 25 June, 2021;
originally announced June 2021.
-
Neutron Guide Building Instruments of the Brazilian Multipurpose Reactor (RMB) Project
Authors:
Alexandre P. S. Souza,
Luiz P. de Oliveira,
Fabiano Yokaichiya,
Frederico A. Genezini,
Margareth K. K. D. Franco
Abstract:
A growing community of scientists has been using neutrons in the most diverse areas of science. In order to meet the researchers demand in the areas of physics, chemistry, materials sciences, engineering, cultural heritage, biology and earth sciences, the Brazilian Multipurpose Reactor (RMB) will provide 3 thermal guides and 3 cold guides, with the installation of several instruments for materials…
▽ More
A growing community of scientists has been using neutrons in the most diverse areas of science. In order to meet the researchers demand in the areas of physics, chemistry, materials sciences, engineering, cultural heritage, biology and earth sciences, the Brazilian Multipurpose Reactor (RMB) will provide 3 thermal guides and 3 cold guides, with the installation of several instruments for materials characterization. In this study, we present a standard design requirement of two primordial instruments, namely Sabiá and Araponga. They are, respectively, cold and thermal neutron instruments and correspond to a Small-Angle Neutron Scattering (SANS) and High-Resolution Powder Neutron Diffractometer (HRPND) to be installed in the Neutron Guide Building (N02) of RMB. To provide adequate flux for both instruments, we propose here an initial investigation of the use of simple and split guides to transport neutron beams to two different instruments on the same guide. For this purpose, we use Monte Carlo simulations utilizing McStas software to check the efficiency of thermal neutron transport for different basic configuration and sources. By considering these results, it is possible to conclude that the split guide configuration is, in most cases, more efficient than cases that use transmitted neutron beams independently of source. We also verify that the employment of different coating indexes for concave and convex surfaces on curved guides is crucial, at least on simulated cases, to optimise neutron flux (intensity and divergence) and diminish facility installation cost.
△ Less
Submitted 11 March, 2020;
originally announced March 2020.
-
Monte Carlo simulations of the S-shaped neutron guide
Authors:
Luiz P. de Oliveira,
Alexandre P. S. Souza,
Fabiano Yokaichiya,
Frederico A. Genezini,
Margareth K. K. D. Franco
Abstract:
Neutron transport along guides is governed by the Liouville theorem and the technology involved has advanced in recent decades. Computer simulations have proven to be useful tools in the design and conception of neutron guide systems in facilities. In this study, we use a Monte Carlo method to perform simulations for an S-shaped neutron guide with different dimensions for a Small-Angle Neutron Sca…
▽ More
Neutron transport along guides is governed by the Liouville theorem and the technology involved has advanced in recent decades. Computer simulations have proven to be useful tools in the design and conception of neutron guide systems in facilities. In this study, we use a Monte Carlo method to perform simulations for an S-shaped neutron guide with different dimensions for a Small-Angle Neutron Scattering (SANS) instrument, through the MCSTAS software. A wavelength cutoff is observed and shown to be dependent on the geometrical parameters of the guide. Results for the neutron flux at sample position are presented and a greater sensitivity of cutoffs concerning the curvatures of the guides than to their lengths is noticed. Our results are in agreement with those obtained from the Acceptance Diagram method and we analyze the beam divergence behavior along the S-shaped guide.
△ Less
Submitted 6 December, 2019;
originally announced December 2019.
