Showing 1–13 of 13 results for author: Souslov, A

Geometry of the vapor layer under a Leidenfrost hydrogel sphere

Authors: Vicente L. Diaz-Melian, Isaac C. D. Lenton, Jack Binysh, Anton Souslov, Scott R. Waitukaitis

Abstract: A floating Leidenfrost droplet exhibits curvature inversion of its underside, due to the balance of vapor pressure and surface tension. Using interferometric imaging, we find different behavior for a levitated hydrogel sphere. Curvature inversion is observed briefly just after deposition, but quickly gives way to a steady state with no inversion. We show the essential role of vaporization on shapi… ▽ More A floating Leidenfrost droplet exhibits curvature inversion of its underside, due to the balance of vapor pressure and surface tension. Using interferometric imaging, we find different behavior for a levitated hydrogel sphere. Curvature inversion is observed briefly just after deposition, but quickly gives way to a steady state with no inversion. We show the essential role of vaporization on shaping the underbelly of the hydrogel, adding a new component to the interplay between vapor pressure and elastic force △ Less

Submitted 8 July, 2025; v1 submitted 7 July, 2025; originally announced July 2025.

Bouncing microdroplets on hydrophobic surfaces

Authors: Jamie Mclauchlan, Jim S. Walker, Vatsal Sanjay, Maziyar Jalaal, Jonathan P. Reid, Adam M. Squires, Anton Souslov

Abstract: Intuitively, slow droplets stick to a surface and faster droplets splash or bounce. However, recent work suggests that on non-wetting surfaces, whether microdroplets stick or bounce depends only on their size and fluid properties, but not on the incoming velocity. Here, we show using theory and experiments that even poorly wetting surfaces have a velocity-dependent criterion for bouncing of aqueou… ▽ More Intuitively, slow droplets stick to a surface and faster droplets splash or bounce. However, recent work suggests that on non-wetting surfaces, whether microdroplets stick or bounce depends only on their size and fluid properties, but not on the incoming velocity. Here, we show using theory and experiments that even poorly wetting surfaces have a velocity-dependent criterion for bouncing of aqueous droplets, which is as high as 6 m/s for diameters of 30-50 microns on hydrophobic surfaces such as Teflon. We quantify this criterion by analyzing the interplay of dissipation, surface adhesion, and incoming kinetic energy, and describe a wealth of associated phenomena, including air bubbles and satellite droplets. Our results on inertial microdroplets elucidate fundamental processes crucial to aerosol science and technology. △ Less

Submitted 28 March, 2025; originally announced March 2025.

Comments: 24 pages, 14 figures, including supplementary information. See https://www.youtube.com/playlist?list=PLXM8aFxQnwl-pRBQGTrGUaReVo-Rq4tim for Supplementary Movies

The 2024 Motile Active Matter Roadmap

Authors: Gerhard Gompper, Howard A. Stone, Christina Kurzthaler, David Saintillan, Fernado Peruani, Dmitry A. Fedosov, Thorsten Auth, Cecile Cottin-Bizonne, Christophe Ybert, Eric Clement, Thierry Darnige, Anke Lindner, Raymond E. Goldstein, Benno Liebchen, Jack Binysh, Anton Souslov, Lucio Isa, Roberto di Leonardo, Giacomo Frangipane, Hongri Gu, Bradley J. Nelson, Fridtjof Brauns, M. Cristina Marchetti, Frank Cichos, Veit-Lorenz Heuthe , et al. (7 additional authors not shown)

Abstract: Activity and autonomous motion are fundamental aspects of many living and engineering systems. Here, the scale of biological agents covers a wide range, from nanomotors, cytoskeleton, and cells, to insects, fish, birds, and people. Inspired by biological active systems, various types of autonomous synthetic nano- and micromachines have been designed, which provide the basis for multifunctional, hi… ▽ More Activity and autonomous motion are fundamental aspects of many living and engineering systems. Here, the scale of biological agents covers a wide range, from nanomotors, cytoskeleton, and cells, to insects, fish, birds, and people. Inspired by biological active systems, various types of autonomous synthetic nano- and micromachines have been designed, which provide the basis for multifunctional, highly responsive, intelligent active materials. A major challenge for understanding and designing active matter is their inherent non-equilibrium nature due to persistent energy consumption, which invalidates equilibrium concepts such as free energy, detailed balance, and time-reversal symmetry. Furthermore, interactions in ensembles of active agents are often non-additive and non-reciprocal. An important aspect of biological agents is their ability to sense the environment, process this information, and adjust their motion accordingly. It is an important goal for the engineering of micro-robotic systems to achieve similar functionality. With many fundamental properties of motile active matter now reasonably well understood and under control, the ground is prepared for the study of physical aspects and mechanisms of motion in complex environments, of the behavior of systems with new physical features like chirality, of the development of novel micromachines and microbots, of the emergent collective behavior and swarming of intelligent self-propelled particles, and of particular features of microbial systems. The vast complexity of phenomena and mechanisms involved in the self-organization and dynamics of motile active matter poses major challenges, which can only be addressed by a truly interdisciplinary effort involving scientists from biology, chemistry, ecology, engineering, mathematics, and physics. △ Less

Submitted 29 November, 2024; originally announced November 2024.

Twisted fibre: a photonic topological insulator

Authors: Nathan Roberts, Brook Salter, Jack Binysh, Peter J. Mosley, Anton Souslov

Abstract: The breaking and enforcing of symmetries is a crucial ingredient in designing topologically robust materials. While magnetic fields can break time-reversal symmetry to create Chern insulators in electronic and microwave systems, at optical frequencies natural materials cannot respond to magnetic fields, which presents a challenge for the scalable exploitation of topologically enhanced devices. Her… ▽ More The breaking and enforcing of symmetries is a crucial ingredient in designing topologically robust materials. While magnetic fields can break time-reversal symmetry to create Chern insulators in electronic and microwave systems, at optical frequencies natural materials cannot respond to magnetic fields, which presents a challenge for the scalable exploitation of topologically enhanced devices. Here, we leverage the natural geometry of fibre to build a scalable photonic Chern insulator by twisting the fibre during fabrication. The twist inside optical fibre breaks an effective time-reversal symmetry and induces a pseudo-magnetic field, which we observe via photonic Landau levels. Unavoidably, this twist introduces a competing topology-destroying effect through a parabolic profile in the effective refractive index. Using simulations to guide experimental materials design, we discover the Goldilocks regime where the real-space Chern invariant survives, guaranteeing topological protection against fabrication-induced disorder of any symmetry class. △ Less

Submitted 20 November, 2024; originally announced November 2024.

Comments: 23 pages, 16 figures

The 2024 Active Metamaterials Roadmap

Authors: Simon A. Pope, Diane J. Roth, Aakash Bansal, Mostafa Mousa, Ashkan Rezanejad, Antonio E. Forte, Geoff. R. Nash, Lawrence Singleton, Felix Langfeldt, Jordan Cheer, Stephen Henthorn, Ian R. Hooper, Euan Hendry, Alex W. Powell, Anton Souslov, Eric Plum, Kai Sun, C. H. de Groot, Otto L. Muskens, Joe Shields, Carlota Ruiz De Galarreta, C. David Wright, Coskun Kocabas, M. Said Ergoktas, Jianling Xiao , et al. (5 additional authors not shown)

Abstract: Active metamaterials are engineered structures that possess novel properties that can be changed after the point of manufacture. Their novel properties arise predominantly from their physical structure, as opposed to their chemical composition and can be changed through means such as direct energy addition into wave paths, or physically changing/morphing the structure in response to both a user or… ▽ More Active metamaterials are engineered structures that possess novel properties that can be changed after the point of manufacture. Their novel properties arise predominantly from their physical structure, as opposed to their chemical composition and can be changed through means such as direct energy addition into wave paths, or physically changing/morphing the structure in response to both a user or environmental input. Active metamaterials are currently of wide interest to the physics community and encompass a range of sub-domains in applied physics (e.g. photonic, microwave, acoustic, mechanical, etc.). They possess the potential to provide solutions that are more suitable to specific applications, or which allow novel properties to be produced which cannot be achieved with passive metamaterials, such as time-varying or gain enhancement effects. They have the potential to help solve some of the important current and future problems faced by the advancement of modern society, such as achieving net-zero, sustainability, healthcare and equality goals. Despite their huge potential, the added complexity of their design and operation, compared to passive metamaterials creates challenges to the advancement of the field, particularly beyond theoretical and lab-based experiments. This roadmap brings together experts in all types of active metamaterials and across a wide range of areas of applied physics. The objective is to provide an overview of the current state of the art and the associated current/future challenges, with the hope that the required advances identified create a roadmap for the future advancement and application of this field. △ Less

Submitted 31 October, 2024; originally announced November 2024.

Single-shot measurement of photonic topological invariant

Authors: Nathan Roberts, Guido Baardink, Anton Souslov, Peter J. Mosley

Abstract: Topological design enables robustness to be engineered into a system. However, a general challenge remains to experimentally characterize topological properties. In this work, we demonstrate a technique for directly observing a winding-number invariant using a single measurement. By propagating light with a sufficiently broad spectrum along a topological photonic crystal fiber, we calculate the wi… ▽ More Topological design enables robustness to be engineered into a system. However, a general challenge remains to experimentally characterize topological properties. In this work, we demonstrate a technique for directly observing a winding-number invariant using a single measurement. By propagating light with a sufficiently broad spectrum along a topological photonic crystal fiber, we calculate the winding number invariant from the output intensity pattern. We quantify the capabilities of this single-shot method, which works even for surprisingly narrow and asymmetric spectral distributions. We demonstrate our approach using topological fiber, but our method is generalizable to other platforms. Our method is experimentally straightforward: we use only a broadband input excitation and a single output to measure the topological invariant. △ Less

Submitted 16 April, 2024; v1 submitted 5 May, 2023; originally announced May 2023.

Topological edge states in equidistant arrays of Lithium Niobate nano-waveguides

Authors: Andrey V. Gorbach, Jesper Beer, Anton Souslov

Abstract: We report that equidistant 1D arrays of thin-film Lithium Niobate nano-waveguides generically support topological edge states. Unlike conventional coupled-waveguide topological systems, the topological properties of these arrays are dictated by the interplay between intra- and inter-modal couplings of two families of guided modes with different parities. Exploiting two modes within the same wavegu… ▽ More We report that equidistant 1D arrays of thin-film Lithium Niobate nano-waveguides generically support topological edge states. Unlike conventional coupled-waveguide topological systems, the topological properties of these arrays are dictated by the interplay between intra- and inter-modal couplings of two families of guided modes with different parities. Exploiting two modes within the same waveguide to design a topological invariant allows us to decrease the system size by a factor of two and substantially simplify the structure. We present two example geometries where topological edge states of different types (based on either quasi-TE or quasi-TM modes) can be observed within a wide range of wavelengths and array spacings. △ Less

Submitted 1 March, 2023; originally announced March 2023.

Journal ref: Opt. Lett. 48, 1982 (2023)

Modeling Leidenfrost levitation of soft elastic solids

Authors: Jack Binysh, Indrajit Chakraborty, Mykyta V. Chubynsky, Vicente Luis Diaz Melian, Scott R. Waitukaitis, James E. Sprittles, Anton Souslov

Abstract: The elastic Leidenfrost effect occurs when a vaporizable soft solid is lowered onto a hot surface. Evaporative flow couples to elastic deformation, giving spontaneous bouncing or steady-state floating. The effect embodies an unexplored interplay between thermodynamics, elasticity, and lubrication: despite being observed, its basic theoretical description remains a challenge. Here, we provide a the… ▽ More The elastic Leidenfrost effect occurs when a vaporizable soft solid is lowered onto a hot surface. Evaporative flow couples to elastic deformation, giving spontaneous bouncing or steady-state floating. The effect embodies an unexplored interplay between thermodynamics, elasticity, and lubrication: despite being observed, its basic theoretical description remains a challenge. Here, we provide a theory of elastic Leidenfrost floating. As weight increases, a rigid solid sits closer to the hot surface. By contrast, we discover an elasticity-dominated regime where the heavier the solid, the higher it floats. This geometry-governed behavior is reminiscent of the dynamics of large liquid Leidenfrost drops. We show that this elastic regime is characterized by Hertzian behavior of the solid's underbelly and derive how the float height scales with materials parameters. Introducing a dimensionless elastic Leidenfrost number, we capture the crossover between rigid and Hertzian behavior. Our results provide theoretical underpinning for recent experiments, and point to the design of novel soft machines. △ Less

Submitted 11 September, 2023; v1 submitted 6 July, 2022; originally announced July 2022.

Comments: 17 pages, including main text, 3 main figures, supplementary material, and 4 supplementary figures

Journal ref: Physical Review Letters 131, 168201 (2023)

Nonlinear shallow-water waves with vertical odd viscosity

Authors: Alex Doak, Guido Baardink, Paul A Milewski, Anton Souslov

Abstract: The breaking of detailed balance in fluids through Coriolis forces or odd-viscous stresses has profound effects on the dynamics of surface waves. Here we explore both weakly and strongly non-linear waves in a three-dimensional fluid with vertical odd viscosity with and without the Coriolis effect. Our model describes the free surface of a shallow fluid composed of nearly vertical vortex filaments,… ▽ More The breaking of detailed balance in fluids through Coriolis forces or odd-viscous stresses has profound effects on the dynamics of surface waves. Here we explore both weakly and strongly non-linear waves in a three-dimensional fluid with vertical odd viscosity with and without the Coriolis effect. Our model describes the free surface of a shallow fluid composed of nearly vertical vortex filaments, which all stand perpendicular to the surface. We find that the odd viscosity in this configuration induces previously unexplored non-linear effects in shallow-water waves, arising from both stresses on the surface and stress gradients in the bulk. By assuming weak nonlinearity, we find reduced equations including Korteweg-de Vries (KdV), Ostrovsky, and Kadomtsev-Petviashvilli (KP) equations with modified coefficients. At sufficiently large odd viscosity, the dispersion changes sign, allowing for compact two-dimensional solitary waves. We show that odd viscosity and surface tension have the same effect on the free surface, but distinct signatures in the fluid flow. Our results describe the collective dynamics of many-vortex systems, which can also occur in oceanic and atmospheric geophysics. △ Less

Submitted 1 February, 2025; v1 submitted 20 April, 2022; originally announced April 2022.

Comments: 26 pages, 12 figures

Topological supermodes in photonic crystal fiber

Authors: Nathan Roberts, Guido Baardink, Josh Nunn, Peter J. Mosley, Anton Souslov

Abstract: Topological states enable robust transport within disorder-rich media through integer invariants inextricably tied to the transmission of light, sound, or electrons. However, the challenge remains to exploit topological protection in a length-scalable platform such as optical fibre. We demonstrate, through both modelling and experiment, optical fibre that hosts topological supermodes across multip… ▽ More Topological states enable robust transport within disorder-rich media through integer invariants inextricably tied to the transmission of light, sound, or electrons. However, the challenge remains to exploit topological protection in a length-scalable platform such as optical fibre. We demonstrate, through both modelling and experiment, optical fibre that hosts topological supermodes across multiple light-guiding cores. We directly measure the photonic winding-number invariant characterising the bulk and observe topological guidance of visible light over metre length scales. Furthermore, the mechanical flexibility of fibre allows us to reversibly reconfigure the topological state. As the fibre is bent, we find that the edge states first lose their localization and then become relocalised due to disorder. We envision fibre as a scalable platform to explore and exploit topological effects in photonic networks. △ Less

Submitted 2 February, 2023; v1 submitted 25 January, 2022; originally announced January 2022.

Comments: 18 pages, including 12 figures. See https://youtube.com/playlist?list=PLXM8aFxQnwl_CKkgFskkeVhmCDvVR6od- for Supplementary Videos

Journal ref: Science Advances 8, add3522 (2022)

Active elastocapillarity in soft solids with negative surface tension

Authors: Jack Binysh, Thomas R. Wilks, Anton Souslov

Abstract: Active solids consume energy to allow for actuation, shape change, and wave propagation not possible in equilibrium. Whereas active interfaces have been realized across many experimental systems, control of three-dimensional (3D) bulk materials remains a challenge. Here, we develop continuum theory and microscopic simulations that describe a 3D soft solid whose boundary experiences active surface… ▽ More Active solids consume energy to allow for actuation, shape change, and wave propagation not possible in equilibrium. Whereas active interfaces have been realized across many experimental systems, control of three-dimensional (3D) bulk materials remains a challenge. Here, we develop continuum theory and microscopic simulations that describe a 3D soft solid whose boundary experiences active surface stresses. The competition between active boundary and elastic bulk yields a broad range of previously unexplored phenomena, which are demonstrations of so-called active elastocapillarity. In contrast to thin shells and vesicles, we discover that bulk 3D elasticity controls snap-through transitions between different anisotropic shapes. These transitions meet at a critical point, allowing a universal classification via Landau theory. The active surface modifies elastic wave propagation to allow zero, or even negative, group velocities. These phenomena offer robust principles for programming shape change and functionality into active solids, from robotic metamaterials down to shape-shifting nanoparticles. △ Less

Submitted 5 July, 2021; v1 submitted 11 January, 2021; originally announced January 2021.

Comments: 16 pages including Methods, 6 figures. See https://youtu.be/04bqs0VKFCc for Supplementary Movie

Journal ref: Science Advances 8, eabk3079 (2022)

Complete absorption of topologically protected waves

Authors: Guido Baardink, Gino Cassella, Luke Neville, Paul A. Milewski, Anton Souslov

Abstract: Chiral edge states can transmit energy along imperfect interfaces in a topologically robust and unidirectional manner when protected by bulk-boundary correspondence. However, in continuum systems, the number of states at an interface can depend on boundary conditions. Here we design interfaces that host a net flux of the number of modes into a region, trapping incoming energy. As a realization, we… ▽ More Chiral edge states can transmit energy along imperfect interfaces in a topologically robust and unidirectional manner when protected by bulk-boundary correspondence. However, in continuum systems, the number of states at an interface can depend on boundary conditions. Here we design interfaces that host a net flux of the number of modes into a region, trapping incoming energy. As a realization, we present a model system of two topological fluids composed of counter-spinning particles, which are separated by a boundary that transitions from a fluid-fluid interface into a no-slip wall. In these fluids, chiral edge states disappear, which implies non-Hermiticity and leads to a novel interplay between topology and energy dissipation. Solving the fluid equations of motion, we find explicit expressions for the disappearing modes. We then conclude that energy dissipation is sped up by mode trapping. Instead of making efficient waveguides, our work shows how topology can be exploited for applications towards acoustic absorption, shielding, and soundproofing. △ Less

Submitted 3 June, 2021; v1 submitted 14 October, 2020; originally announced October 2020.

Comments: 12 pages including Supplemental Material, 9 figures. See https://www.youtube.com/watch?v=FoNgKH6GWJ4 for Supplementary Movie

Journal ref: Phys. Rev. E 104, 014603 (2021)

Hydrodynamic correlation functions of chiral active fluids

Authors: Debarghya Banerjee, Anton Souslov, Vincenzo Vitelli

Abstract: The success of spectroscopy to characterise equilibrium fluids, for example the heat capacity ratio, suggests a parallel approach for active fluids. Here, we start from a hydrodynamic description of chiral active fluids composed of spinning constituents and derive their low-frequency, long-wavelength response functions using the Kadanoff-Martin formalism. We find that the presence of odd (equivale… ▽ More The success of spectroscopy to characterise equilibrium fluids, for example the heat capacity ratio, suggests a parallel approach for active fluids. Here, we start from a hydrodynamic description of chiral active fluids composed of spinning constituents and derive their low-frequency, long-wavelength response functions using the Kadanoff-Martin formalism. We find that the presence of odd (equivalently, Hall) viscosity leads to mixed density-vorticity response even at linear order. Such response, prohibited in time-reversal-invariant fluids, is a large-scale manifestation of the microscopic breaking of time-reversal symmetry. Our work suggests possible experimental probes that can measure anomalous transport coefficients in active fluids through dynamic light scattering. △ Less

Submitted 1 May, 2020; originally announced May 2020.

Comments: 10 pages, 2 figures

Journal ref: Phys. Rev. Fluids 7, 043301 (2022)