-
A Numerical Study on Spray Characteristics at Start of Injection for Gasoline Direct Injection
Authors:
Zongyu Yue,
Michele Battistoni,
Sibendu Som
Abstract:
This paper presents a CFD study of Engine Combustion Network (ECN) Spray G, focusing on the transient characteristics of spray at start of injection. The Large Eddy Simulation (LES) coupled with Volume of Fluid (VOF) method is used to model the turbulent two-phase flow. A moving needle boundary condition is applied to capture the internal flow condition accurately. The injector geometry was measur…
▽ More
This paper presents a CFD study of Engine Combustion Network (ECN) Spray G, focusing on the transient characteristics of spray at start of injection. The Large Eddy Simulation (LES) coupled with Volume of Fluid (VOF) method is used to model the turbulent two-phase flow. A moving needle boundary condition is applied to capture the internal flow condition accurately. The injector geometry was measured with micron-level resolution using full spectrum x-ray tomographic imaging at Advanced Photon Source (APS) at Argonne National Labora-tory, providing detailed machining error from manufacturer and realistic rough surface. For comparison, a nominal geometry is also used for the simulation. Spray characteristics such as Sauter Mean Diameter (SMD), droplet volume and surface area are extracted by post-processing the CFD outputs. It is seen that compared to the nominal geometry, the use of the high resolution real geometry predicts about 11% lower SMD. The rough surface along with manufacturing defects generate more unstable structures along the jet surface and accelerates the liquid de-formation and breakup processes, starting inside of the counter-bore. This result shows that the machining details of injector, which is usually ignored in the two-phase flow simulations, has considerable impact on the spray development process.
△ Less
Submitted 8 October, 2018;
originally announced October 2018.
-
Evaluation of a new cavitation erosion metric based on fluid-solid energy transfer in channel flow simulations
Authors:
Gina M. Magnotti,
Michele Battistoni,
Kaushik Saha,
Sibendu Som
Abstract:
Although there have been extensive investigations characterizing cavitation phenomenon in fuel injectors, much is still unknown about the mechanisms driving cavitation-induced erosion, and how these complicated physics should be represented in a model. In lieu of computationally expensive fluid-structure interaction modeling, the Eulerian mixture modeling approach has been accepted as an efficient…
▽ More
Although there have been extensive investigations characterizing cavitation phenomenon in fuel injectors, much is still unknown about the mechanisms driving cavitation-induced erosion, and how these complicated physics should be represented in a model. In lieu of computationally expensive fluid-structure interaction modeling, the Eulerian mixture modeling approach has been accepted as an efficient means of capturing cavitation phenomena. However, there remains a need to link the erosive potential of cloud collapse events with the subsequent material deformation and damage of neighboring surfaces. Even though several cavitation erosion indices have been proposed in the literature, no single metric has been identified as universally applicable across all injector-relevant conditions. The objective of this work is to identify parameters that characterize the erosive potential of cavitation cloud collapse mechanisms that are likely to occur within injector orifices. While a commonly employed cavitation erosion metric, namely the maximum local pressure, was found to provide indications of potential sites for pitting and material rupture from single impact events, no additional information could be determined regarding the material erosion process. To improve representation of the incubation period within the cavitation erosion process, a new metric was derived based on cumulative energy absorbed by the solid material from repeated hydrodynamic impacts. Through evaluation of predicted cavitation cloud collapse events in a channel geometry against available experimental data, the stored energy metric yielded insight into the erosive potential of recorded impact events. The stored energy metric provided a means to accurately predict the influence of flow conditions on the incubation period before material erosion. ...
△ Less
Submitted 8 October, 2018;
originally announced October 2018.
-
Exploration of cavitation-induced erosion metrics in throttle flow simulations
Authors:
Gina M. Magnotti,
Michele Battistoni,
Kaushik Saha,
Sibendu Som
Abstract:
Although there have been extensive experimental and computational investigations in characterizing cavitation phenomenon in both diesel and gasoline direct injectors, much is still unknown about the mechanisms driving cavitation-induced erosion, and how this complicated fluid-structure interaction should be modeled. To explore current modeling capabilities, a numerical investigation was conducted…
▽ More
Although there have been extensive experimental and computational investigations in characterizing cavitation phenomenon in both diesel and gasoline direct injectors, much is still unknown about the mechanisms driving cavitation-induced erosion, and how this complicated fluid-structure interaction should be modeled. To explore current modeling capabilities, a numerical investigation was conducted within the CONVERGE modeling framework to assess proposed cavitation erosion metrics in the literature, and their link to the predicted cavitation cloud collapse mechanism. The multiphase flow within the Winklhofer Throttle U geometry was modeled using a compressible mixture model, where phase change was represented using the Homogeneous Relaxation Model (HRM) and the turbulent flow evolution was modeled using a dynamic structure approach for Large Eddy Simulations (LES). After comparing the model predictions against available experimental data, representative condensation events and potential cavitation erosion sites were identified. The cavitation cloud structures responsible for potential material damage were visualized through the evolution of the vorticity field. For the modeled throttle geometry, it was found that the horseshoe cloud implosion mechanism was predicted to occur and generate excessive impact loads at the throttle boundary.
△ Less
Submitted 8 October, 2018;
originally announced October 2018.
-
The Astrobiology of the Anthropocene
Authors:
Jacob Haqq-Misra,
Sanjoy Som,
Brendan Mullan,
Rafael Loureiro,
Edward Schwieterman,
Lauren Seyler,
Haritina Mogosanu,
Adam Frank,
Eric Wolf,
Duncan Forgan,
Charles Cockell,
Woodruff Sullivan
Abstract:
Human influence on the biosphere has been evident at least since the development of widespread agriculture, and some stratigraphers have suggested that the activities of modern civilization indicate a geological epoch transition. The study of the anthropocene as a geological epoch, and its implication for the future of energy-intensive civilizations, is an emerging transdisciplinary field in which…
▽ More
Human influence on the biosphere has been evident at least since the development of widespread agriculture, and some stratigraphers have suggested that the activities of modern civilization indicate a geological epoch transition. The study of the anthropocene as a geological epoch, and its implication for the future of energy-intensive civilizations, is an emerging transdisciplinary field in which astrobiology can play a leading role. Habitability research of Earth, Mars, and exoplanets examines extreme cases relevant for understanding climate change as a planetary process. Energy-intensive civilizations will also face thermodynamic limits to growth, which provides an important constraint for estimating the longevity of human civilization and guiding the search for extraterrestrial intelligence. We recommend that missions concepts such as LUVOIR, HabEx, and OST be pursued in order to make significant progress toward understanding the future evolution of life on our planet and the possible evolution of technological, energy-intensive life elsewhere in the universe.
△ Less
Submitted 6 January, 2018; v1 submitted 29 December, 2017;
originally announced January 2018.
-
Thermocapillary effect on the cross-stream migration of a surfactant-laden droplet in Poiseuille flow
Authors:
Sayan Das,
Shubhadeep Mandal,
S. K. Som,
Suman Chakraborty
Abstract:
The motion of a viscous droplet in unbounded Poiseuille flow under the combined influence of bulk-insoluble surfactant and linearly varying temperature field aligned in the direction of imposed flow is studied analytically. Neglecting fluid inertia, thermal convection and shape deformation, asymptotic analysis is performed to obtain the velocity of a force-free surfactant-laden droplet. The presen…
▽ More
The motion of a viscous droplet in unbounded Poiseuille flow under the combined influence of bulk-insoluble surfactant and linearly varying temperature field aligned in the direction of imposed flow is studied analytically. Neglecting fluid inertia, thermal convection and shape deformation, asymptotic analysis is performed to obtain the velocity of a force-free surfactant-laden droplet. The present study is focused on two limiting situations of surfactant transport: (i) small surface Peclet number, and (ii) high surface Peclet number. Thermocapillary-induced Marangoni stress, strength of which relative to viscous stress is represented by thermal Marangoni number, has strong influence on the distribution of surfactant on the droplet surface. Temperature field not only affects the axial velocity of the droplet but also has significant effect on the cross-stream velocity of the droplet in spite of the fact that the temperature gradient is aligned with the Poiseuille flow direction. When the imposed temperature increases in the direction of Poiseuille flow, the droplet migrates towards the flow centerline. The magnitude of both axial and cross-stream velocity components increases with the thermal Marangoni number. However, when the imposed temperature decreases in the direction of Poiseuille flow, the magnitude of both axial and cross-stream velocity components may increase or decrease with the thermal Marangoni number. Most interestingly, the droplet moves either towards the flow centerline or away from it. Present study shows a critical value of the thermal Marangoni number beyond which the droplet moves away from the flow centerline which is in sharp contrast to the motion of a surfactant-laden droplet in isothermal flow for which droplet always moves towards the flow centerline.
△ Less
Submitted 11 January, 2017;
originally announced January 2017.
-
Puffing and micro-explosion behavior in combustion of butanol/Jet A-1 and acetone-butanol-ethanol (A-B-E)/Jet A-1 fuel droplets
Authors:
D. Chaitanya Kumar Rao,
Srinibas Karmakar,
S. K. Som
Abstract:
The present investigation deals with the puffing and micro-explosion characteristics in the combustion of a single droplet comprising butanol/Jet A-1, acetone-butanol-ethanol (A-B-E)/Jet A-1 blends, and A-B-E. The onset of nucleation, growth of vapor bubble and subsequent breakup of droplet for various fuel blends have been analyzed from the high-speed images. Puffing was observed to be the domina…
▽ More
The present investigation deals with the puffing and micro-explosion characteristics in the combustion of a single droplet comprising butanol/Jet A-1, acetone-butanol-ethanol (A-B-E)/Jet A-1 blends, and A-B-E. The onset of nucleation, growth of vapor bubble and subsequent breakup of droplet for various fuel blends have been analyzed from the high-speed images. Puffing was observed to be the dominant phenomenon in 30% butanol blend, while micro-explosion was found to be the dominant one in other fuel blends (blend with 50% butanol or 30% A-B-E or 50% A-B-E). It was observed that puffing always preceded the micro-explosion. The probability of micro-explosion in droplets with A-B-E blends was found to be higher than that of butanol blends. Although the rate of bubble growth was almost similar for all butanol and A-B-E blends, the final bubble diameter before the droplet breakup was found to be higher for 50/50 blends than that of 30/70 blends. The occurrence of micro-explosion shortened the droplet lifetime, and this effect appeared to be stronger for droplets with 50/50 composition. Micro-explosion led to the ejection of both larger and smaller secondary droplets; however, puffing resulted in relatively smaller secondary droplets compared to micro-explosion. Puffing/micro-explosion were also observed in the secondary droplets.
△ Less
Submitted 19 January, 2017; v1 submitted 29 November, 2016;
originally announced November 2016.
-
Migration of a surfactant-laden droplet in non-isothermal Poiseuille flow
Authors:
Sayan Das,
Shubhadeep Mandal,
S K Som,
Suman Chakraborty
Abstract:
The motion of a surfactant-laden viscous droplet in the presence of background non-isothermal Poiseuille flow is studied analytically and numerically. Specifically, the effect of interfacial Marangoni stress due to non-uniform distribution of surfactants and temperature at the droplet interface on the velocity and direction of motion of the droplet along the centerline of imposed Poiseuille flow i…
▽ More
The motion of a surfactant-laden viscous droplet in the presence of background non-isothermal Poiseuille flow is studied analytically and numerically. Specifically, the effect of interfacial Marangoni stress due to non-uniform distribution of surfactants and temperature at the droplet interface on the velocity and direction of motion of the droplet along the centerline of imposed Poiseuille flow is investigated in the presence of linearly varying temperature field. In the absence of thermal convection, fluid inertia and shape deformation, the interfacial transport of bulk-insoluble surfactants is governed by the surface Peclet number which represents the relative strength of the advective transport of surfactant over the diffusive transport. We obtain analytical solution for small and large values of the surface Peclet number. Numerical solution is obtained for arbitrary surface Peclet number, which compares well with the analytical solution. Depending on the direction of temperature gradient with respect to the imposed Poiseuille flow, the surfactant-induced Marangoni stress affects the droplet velocity differently. When the imposed temperature increases in the direction of imposed Poiseuille flow, surfactants retard the droplet motion as compared with a surfactant-free droplet. However, when the imposed temperature decreases in the direction of imposed Poiseuille flow, presence of surfactants may increase or decrease the magnitude of droplet velocity depending on the relevant governing parameters. Further, for particular values of governing parameters, we observe change in direction of droplet motion due to presence of surfactants, which may bear significant consequences in the design of droplet based microfluidic systems.
△ Less
Submitted 25 September, 2016;
originally announced September 2016.
-
The Benefits and Harms of Transmitting Into Space
Authors:
Jacob Haqq-Misra,
Michael Busch,
Sanjoy Som,
Seth Baum
Abstract:
Deliberate and unintentional radio transmissions from Earth propagate into space. These transmissions could be detected by extraterrestrial watchers over interstellar distances. Here, we analyze the harms and benefits of deliberate and unintentional transmissions relevant to Earth and humanity. Comparing the magnitude of deliberate radio broadcasts intended for messaging to extraterrestrial intell…
▽ More
Deliberate and unintentional radio transmissions from Earth propagate into space. These transmissions could be detected by extraterrestrial watchers over interstellar distances. Here, we analyze the harms and benefits of deliberate and unintentional transmissions relevant to Earth and humanity. Comparing the magnitude of deliberate radio broadcasts intended for messaging to extraterrestrial intelligence (METI) with the background radio spectrum of Earth, we find that METI attempts to date have much lower detectability than emissions from current radio communication technologies on Earth. METI broadcasts are usually transient and several orders of magnitude less powerful than other terrestrial sources such as astronomical and military radars, which provide the strongest detectable signals. The benefits of radio communication on Earth likely outweigh the potential harms of detection by extraterrestrial watchers; however, the uncertainty regarding the outcome of contact with extraterrestrial beings creates difficulty in assessing whether or not to engage in long-term and large-scale METI.
△ Less
Submitted 15 March, 2013; v1 submitted 23 July, 2012;
originally announced July 2012.
