-
Satellite-Based Quantification of Contrail Radiative Forcing over Europe: A Two-Week Analysis of Aviation-Induced Climate Effects
Authors:
Irene Ortiz,
Ermioni Dimitropoulou,
Pierre de Buyl,
Nicolas Clerbaux,
Javier García-Heras,
Amin Jafarimoghaddam,
Hugues Brenot,
Jeroen van Gent,
Klaus Sievers,
Evelyn Otero,
Parthiban Loganathan,
Manuel Soler
Abstract:
Aviation's non-CO$_2$ effects, especially the impact of aviation-induced contrails, drive atmospheric changes and can influence climate dynamics. Although contrails are believed to contribute to global warming through their net warming effect, uncertainties persist due to the challenges in accurately measuring their radiative impacts. This study aims to address this knowledge gap by investigating…
▽ More
Aviation's non-CO$_2$ effects, especially the impact of aviation-induced contrails, drive atmospheric changes and can influence climate dynamics. Although contrails are believed to contribute to global warming through their net warming effect, uncertainties persist due to the challenges in accurately measuring their radiative impacts. This study aims to address this knowledge gap by investigating the relationship between aviation-induced contrails, as observed in Meteosat Second Generation (MSG) satellite imagery, and their impact on radiative forcing (RF) over a two-week study. Results show that while daytime contrails generally have a cooling effect, the higher number of nighttime contrails results in a net warming effect over the entire day. Net RF values for detected contrails range approximately from -8 TW to 2.5 TW during the day and from 0 to 6 TW at night. Our findings also show a 41.03% increase in contrail coverage from January 24-30, 2023, to the same week in 2024, accompanied by a 128.7% rise in contrail radiative forcing (CRF), indicating greater warming from the added contrails. These findings highlight the necessity of considering temporal factors, such as the timing and duration of contrail formation, when assessing their overall warming impact. They also indicate a potential increase in contrail-induced warming from 2023 to 2024, attributable to the rise in contrail coverage. Further investigation into these trends is crucial for the development of effective mitigation strategies.
△ Less
Submitted 7 November, 2024; v1 submitted 16 September, 2024;
originally announced September 2024.
-
Locuaz: an in-silico platform for antibody fragments optimization
Authors:
German P. Barletta,
Rika Tandiana,
Miguel Soler,
Sara Fortuna,
Walter Rocchia
Abstract:
Motivation: Engineering high-affinity binders targeting specific antigenic determinants remains a challenging and often daunting task, requiring extensive experimental screening. Computational methods have the potential to accelerate this process, reducing costs and time, but only if they demonstrate broad applicability and efficiency in exploring mutations, evaluating affinity, and pruning unprod…
▽ More
Motivation: Engineering high-affinity binders targeting specific antigenic determinants remains a challenging and often daunting task, requiring extensive experimental screening. Computational methods have the potential to accelerate this process, reducing costs and time, but only if they demonstrate broad applicability and efficiency in exploring mutations, evaluating affinity, and pruning unproductive mutation paths. Results: In response to these challenges, we introduce a new computational platform for optimizing protein binders towards their targets. The platform is organized as a series of modules, performing mutation selection and application, molecular dynamics (MD) simulations to sample conformations around interaction poses, and mutation prioritization using suitable scoring functions. Notably, the platform supports parallel exploration of different mutation streams, enabling in silico high-throughput screening on HPC systems. Furthermore, the platform is highly customizable, allowing users to implement their own protocols. Availability and implementation: the source code is available at https://github. com/pgbarletta/locuaz and documentation is at https://locuaz.readthedocs.io/
△ Less
Submitted 14 April, 2024;
originally announced April 2024.
-
Anti-Coulomb ion-ion interactions: a theoretical and computational study
Authors:
Alec Wills,
Anthony Mannino,
Isidro Losada,
Sara G. Mayo,
Jose M. Soler,
Marivi Fernandez-Serra
Abstract:
The free energy of ion solvation can be decomposed into enthalpic and entropic contributions. This helps to understand the connection between the dielectric properties and the underlying forces. We present a simple linear-response model of screened charge interactions that provides an alternative understanding of solvation barriers. Moreover, it explains the "anti-Coulomb" interactions (attraction…
▽ More
The free energy of ion solvation can be decomposed into enthalpic and entropic contributions. This helps to understand the connection between the dielectric properties and the underlying forces. We present a simple linear-response model of screened charge interactions that provides an alternative understanding of solvation barriers. Moreover, it explains the "anti-Coulomb" interactions (attraction between like-charged ions and repulsion between opposite-charged ions) observed in both simulations and experiments. We show that this is a universal behavior associated to the non-local response function of any dielectric or metallic system.
△ Less
Submitted 21 June, 2024; v1 submitted 3 April, 2024;
originally announced April 2024.
-
SIESTA: recent developments and applications
Authors:
Alberto García,
Nick Papior,
Arsalan Akhtar,
Emilio Artacho,
Volker Blum,
Emanuele Bosoni,
Pedro Brandimarte,
Mads Brandbyge,
J. I. Cerdá,
Fabiano Corsetti,
Ramón Cuadrado,
Vladimir Dikan,
Jaime Ferrer,
Julian Gale,
Pablo García-Fernández,
V. M. García-Suárez,
Sandra García,
Georg Huhs,
Sergio Illera,
Richard Korytár,
Peter Koval,
Irina Lebedeva,
Lin Lin,
Pablo López-Tarifa,
Sara G. Mayo
, et al. (11 additional authors not shown)
Abstract:
A review of the present status, recent enhancements, and applicability of the SIESTA program is presented. Since its debut in the mid-nineties, SIESTA's flexibility, efficiency and free distribution has given advanced materials simulation capabilities to many groups worldwide. The core methodological scheme of SIESTA combines finite-support pseudo-atomic orbitals as basis sets, norm-conserving pse…
▽ More
A review of the present status, recent enhancements, and applicability of the SIESTA program is presented. Since its debut in the mid-nineties, SIESTA's flexibility, efficiency and free distribution has given advanced materials simulation capabilities to many groups worldwide. The core methodological scheme of SIESTA combines finite-support pseudo-atomic orbitals as basis sets, norm-conserving pseudopotentials, and a real-space grid for the representation of charge density and potentials and the computation of their associated matrix elements. Here we describe the more recent implementations on top of that core scheme, which include: full spin-orbit interaction, non-repeated and multiple-contact ballistic electron transport, DFT+U and hybrid functionals, time-dependent DFT, novel reduced-scaling solvers, density-functional perturbation theory, efficient Van der Waals non-local density functionals, and enhanced molecular-dynamics options. In addition, a substantial effort has been made in enhancing interoperability and interfacing with other codes and utilities, such as Wannier90 and the second-principles modelling it can be used for, an AiiDA plugin for workflow automatization, interface to Lua for steering SIESTA runs, and various postprocessing utilities. SIESTA has also been engaged in the Electronic Structure Library effort from its inception, which has allowed the sharing of various low level libraries, as well as data standards and support for them, in particular the PSML definition and library for transferable pseudopotentials, and the interface to the ELSI library of solvers. Code sharing is made easier by the new open-source licensing model of the program. This review also presents examples of application of the capabilities of the code, as well as a view of on-going and future developments.
△ Less
Submitted 1 June, 2020;
originally announced June 2020.
-
The CECAM Electronic Structure Library and the modular software development paradigm
Authors:
Micael J. T. Oliveira,
Nick Papior,
Yann Pouillon,
Volker Blum,
Emilio Artacho,
Damien Caliste,
Fabiano Corsetti,
Stefano de Gironcoli,
Alin M. Elena,
Alberto Garcia,
Victor M. Garcia-Suarez,
Luigi Genovese,
William P. Huhn,
Georg Huhs,
Sebastian Kokott,
Emine Kucukbenli,
Ask H. Larsen,
Alfio Lazzaro,
Irina V. Lebedeva,
Yingzhou Li,
David Lopez-Duran,
Pablo Lopez-Tarifa,
Martin Luders,
Miguel A. L. Marques,
Jan Minar
, et al. (12 additional authors not shown)
Abstract:
First-principles electronic structure calculations are very widely used thanks to the many successful software packages available. Their traditional coding paradigm is monolithic, i.e., regardless of how modular its internal structure may be, the code is built independently from others, from the compiler up, with the exception of linear-algebra and message-passing libraries. This model has been qu…
▽ More
First-principles electronic structure calculations are very widely used thanks to the many successful software packages available. Their traditional coding paradigm is monolithic, i.e., regardless of how modular its internal structure may be, the code is built independently from others, from the compiler up, with the exception of linear-algebra and message-passing libraries. This model has been quite successful for decades. The rapid progress in methodology, however, has resulted in an ever increasing complexity of those programs, which implies a growing amount of replication in coding and in the recurrent re-engineering needed to adapt to evolving hardware architecture. The Electronic Structure Library (\esl) was initiated by CECAM (European Centre for Atomic and Molecular Calculations) to catalyze a paradigm shift away from the monolithic model and promote modularization, with the ambition to extract common tasks from electronic structure programs and redesign them as free, open-source libraries. They include "heavy-duty" ones with a high degree of parallelisation, and potential for adaptation to novel hardware within them, thereby separating the sophisticated computer science aspects of performance optimization and re-engineering from the computational science done by scientists when implementing new ideas. It is a community effort, undertaken by developers of various successful codes, now facing the challenges arising in the new model. This modular paradigm will improve overall coding efficiency and enable specialists (computer scientists or computational scientists) to use their skills more effectively. It will lead to a more sustainable and dynamic evolution of software as well as lower barriers to entry for new developers.
△ Less
Submitted 24 June, 2020; v1 submitted 11 May, 2020;
originally announced May 2020.
-
PARCE: Protocol for Amino acid Refinement through Computational Evolution
Authors:
Rodrigo Ochoa,
Miguel A. Soler,
Alessandro Laio,
Pilar Cossio
Abstract:
The in silico design of peptides and proteins as binders is useful for diagnosis and therapeutics due to their low adverse effects and major specificity. To select the most promising candidates, a key matter is to understand their interactions with protein targets. In this work, we present PARCE, an open source Protocol for Amino acid Refinement through Computational Evolution that implements an a…
▽ More
The in silico design of peptides and proteins as binders is useful for diagnosis and therapeutics due to their low adverse effects and major specificity. To select the most promising candidates, a key matter is to understand their interactions with protein targets. In this work, we present PARCE, an open source Protocol for Amino acid Refinement through Computational Evolution that implements an advanced and promising method for the design of peptides and proteins. The protocol performs a random mutation in the binder sequence, then samples the bound conformations using molecular dynamics simulations, and evaluates the protein-protein interactions from multiple scoring. Finally, it accepts or rejects the mutation by applying a consensus criterion based on binding scores. The procedure is iterated with the aim to explore efficiently novel sequences with potential better affinities toward their targets. We also provide a tutorial for running and reproducing the methodology.
△ Less
Submitted 27 April, 2020;
originally announced April 2020.
-
Ranking Viscous Finger Simulations to an Acquired Ground Truth with Topology-aware Matchings
Authors:
Maxime Soler,
Martin Petitfrere,
Gilles Darche,
Melanie Plainchault,
Bruno Conche,
Julien Tierny
Abstract:
This application paper presents a novel framework based on topological data analysis for the automatic evaluation and ranking of viscous finger simulation runs in an ensemble with respect to a reference acquisition. Individual fingers in a given time-step are associated with critical point pairs in the distance field to the injection point, forming persistence diagrams. Different metrics, based on…
▽ More
This application paper presents a novel framework based on topological data analysis for the automatic evaluation and ranking of viscous finger simulation runs in an ensemble with respect to a reference acquisition. Individual fingers in a given time-step are associated with critical point pairs in the distance field to the injection point, forming persistence diagrams. Different metrics, based on optimal transport, for comparing time-varying persistence diagrams in this specific applicative case are introduced. We evaluate the relevance of the rankings obtained with these metrics, both qualitatively thanks to a lightweight web visual interface, and quantitatively by studying the deviation from a reference ranking suggested by experts. Extensive experiments show the quantitative superiority of our approach compared to traditional alternatives. Our web interface allows experts to conveniently explore the produced rankings. We show a complete viscous fingering case study demonstrating the utility of our approach in the context of porous media fluid flow, where our framework can be used to automatically discard physically-irrelevant simulation runs from the ensemble and rank the most plausible ones. We document an in-situ implementation to lighten I/O and performance constraints arising in the context of parametric studies.
△ Less
Submitted 20 August, 2019;
originally announced August 2019.
-
Charge transport through a single molecule of trans-1-bis-diazofluorene [60]fullerene
Authors:
Davide Stefani,
Cristian A. Gutiérrez-Cerón,
Daniel Aravena,
Jacqueline Labra-Muñoz,
Catalina Suarez,
Shuming Liu,
Monica Soler,
Luis Echegoyen,
Herre S. J. van der Zant,
Diana Dulic
Abstract:
Fullerenes have attracted interest for their possible applications in various electronic, biological, and optoelectronic devices. However, for efficient use in such devices, a suitable anchoring group has to be employed that forms well-defined and stable contacts with the electrodes. In this work, we propose a novel fullerene tetramalonate derivate functionalized with trans-1 4,5-diazafluorene anc…
▽ More
Fullerenes have attracted interest for their possible applications in various electronic, biological, and optoelectronic devices. However, for efficient use in such devices, a suitable anchoring group has to be employed that forms well-defined and stable contacts with the electrodes. In this work, we propose a novel fullerene tetramalonate derivate functionalized with trans-1 4,5-diazafluorene anchoring groups. The conductance of single-molecule junctions, investigated in two different setups with the mechanically controlled break junction technique, reveals the formation of molecular junctions at three conductance levels. We attribute the conductance peaks to three binding modes of the anchoring groups to the gold electrodes. Density functional theory calculations confirm the existence of multiple binding configurations and calculated transmission functions are consistent with experimentally determined conductance values.
△ Less
Submitted 1 October, 2017;
originally announced October 2017.
-
Optimization of an exchange-correlation density functional for water
Authors:
Michelle Fritz,
Marivi Fernandez-Serra,
Jose M. Soler
Abstract:
We describe a method, that we call data projection onto parameter space (DPPS), to optimize an energy functional of the electron density, so that it reproduces a dataset of experimental magnitudes. Our scheme, based on Bayes theorem, constrains the optimized functional not to depart unphysically from existing ab initio functionals. The resulting functional maximizes the probability of being the \c…
▽ More
We describe a method, that we call data projection onto parameter space (DPPS), to optimize an energy functional of the electron density, so that it reproduces a dataset of experimental magnitudes. Our scheme, based on Bayes theorem, constrains the optimized functional not to depart unphysically from existing ab initio functionals. The resulting functional maximizes the probability of being the \correct" parametrization of a given functional form, in the sense of Bayes theory. The application of DPPS to water sheds new light on why density functional theory has performed rather poorly for liquid water, on what improvements are needed, and on the intrinsic limitations of the generalized gradient approximation to electron exchange and correlation. Finally, we present tests of our water-optimized functional, that we call vdW-DF-w, showing that it performs very well for a variety of condensed water systems.
△ Less
Submitted 24 March, 2016; v1 submitted 23 March, 2016;
originally announced March 2016.
-
A simple Chain-of-States method in acceleration space for the efficient location of Minimum Energy Paths
Authors:
E. R. Hernandez,
C. P. Herrero,
J. M. Soler
Abstract:
We describe a robust and efficient chain-of-states method for computing Minimum Energy Paths~(MEPs) associated to barrier-crossing events in poly-atomic systems. The path is parametrized in terms of a continuous variable $t \in [0,1]$ that plays the role of time. In contrast to previous chain-of-states algorithms such as the Nudged Elastic Band or String methods, where the positions of the states…
▽ More
We describe a robust and efficient chain-of-states method for computing Minimum Energy Paths~(MEPs) associated to barrier-crossing events in poly-atomic systems. The path is parametrized in terms of a continuous variable $t \in [0,1]$ that plays the role of time. In contrast to previous chain-of-states algorithms such as the Nudged Elastic Band or String methods, where the positions of the states in the chain are taken as variational parameters in the search for the MEP, our strategy is to formulate the problem in terms of the second derivatives of the coordinates with respect to $t$, {\em i.e.\/} the state {\em accelerations\/}. We show this to result in a very transparent and efficient method for determining the MEP. We describe the application of the method in a series of test cases, including two low-dimensional problems and the Stone-Wales transformation in $\mbox{C}_{60}$.
△ Less
Submitted 23 October, 2015; v1 submitted 8 September, 2015;
originally announced September 2015.
-
Optimal finite-range atomic basis sets for liquid water and ice
Authors:
Fabiano Corsetti,
M. -V. Fernández-Serra,
José M. Soler,
Emilio Artacho
Abstract:
Finite-range numerical atomic orbitals are the basis functions of choice for several first principles methods, due to their flexibility and scalability. Generating and testing such basis sets, however, remains a significant challenge for the end user. We discuss these issues and present a new scheme for generating improved polarization orbitals of finite range. We then develop a series of high-acc…
▽ More
Finite-range numerical atomic orbitals are the basis functions of choice for several first principles methods, due to their flexibility and scalability. Generating and testing such basis sets, however, remains a significant challenge for the end user. We discuss these issues and present a new scheme for generating improved polarization orbitals of finite range. We then develop a series of high-accuracy basis sets for the water molecule, and report on their performance in describing the monomer and dimer, two phases of ice, and liquid water at ambient and high density. The tests are performed by comparison with plane-wave calculations, and show the atomic orbital basis sets to exhibit an excellent level of transferability and consistency. The highest-order bases (quadruple-zeta) are shown to give accuracies comparable to a plane-wave kinetic energy cutoff of at least ~1000 eV for quantities such as energy differences and ionic forces, as well as achieving significantly greater accuracies for total energies and absolute pressures.
△ Less
Submitted 11 November, 2013; v1 submitted 11 July, 2013;
originally announced July 2013.
-
Room temperature compressibility and diffusivity of liquid water from first principles
Authors:
Fabiano Corsetti,
Emilio Artacho,
José M. Soler,
S. S. Alexandre,
M. -V. Fernández-Serra
Abstract:
The isothermal compressibility of water is essential to understand its anomalous properties. We compute it by ab initio molecular dynamics simulations of 200 molecules at five densities, using two different van der Waals density functionals. While both functionals predict compressibilities within ~30% of experiment, only one of them accurately reproduces, within the uncertainty of the simulation,…
▽ More
The isothermal compressibility of water is essential to understand its anomalous properties. We compute it by ab initio molecular dynamics simulations of 200 molecules at five densities, using two different van der Waals density functionals. While both functionals predict compressibilities within ~30% of experiment, only one of them accurately reproduces, within the uncertainty of the simulation, the density dependence of the self-diffusion coefficient in the anomalous region. The discrepancies between the two functionals are explained in terms of the low- and high-density structures of the liquid.
△ Less
Submitted 11 November, 2013; v1 submitted 5 July, 2013;
originally announced July 2013.
-
Anomalous Nuclear Quantum Effects in Ice
Authors:
B. Pamuk,
J. M. Soler,
R. Ramirez,
C. P. Herrero,
P. W. Stephens,
P. B. Allen,
M. V. Fernandez-Serra
Abstract:
One striking anomaly of water ice has been largely neglected and never explained. Replacing hydrogen ($^1$H) by deuterium ($^2$H) causes ice to expand, whereas the "normal" isotope effect is volume contraction with increased mass. Furthermore, the anomaly increases with temperature $T$, even though a normal isotope shift should decrease with $T$ and vanish when $T$ is high enough to use classical…
▽ More
One striking anomaly of water ice has been largely neglected and never explained. Replacing hydrogen ($^1$H) by deuterium ($^2$H) causes ice to expand, whereas the "normal" isotope effect is volume contraction with increased mass. Furthermore, the anomaly increases with temperature $T$, even though a normal isotope shift should decrease with $T$ and vanish when $T$ is high enough to use classical nuclear motions. In this study, we show that these effects are very well described by {\it ab initio} density functional theory. Our theoretical modeling explains these anomalies, and allows us to predict and to experimentally confirm a counter effect, namely that replacement of $^{16}$O by $^{18}$O causes a normal lattice contraction.
△ Less
Submitted 20 February, 2012; v1 submitted 21 November, 2011;
originally announced November 2011.
-
Density, structure and dynamics of water: the effect of Van der Waals interactions
Authors:
Jue Wang,
G. Roman-Perez,
Jose M. Soler,
Emilio Artacho,
M. -V. Fernandez-Serra
Abstract:
It is known that ab initio molecular dynamics (AIMD) simulations of liquid water, based on the generalized gradient approximation (GGA) to density functional theory (DFT), yield structural and diffusive properties in reasonable agreement with experiment only if artificially high temperatures are used in the simulations. The equilibrium density, at normal conditions, of DFT water has been recently…
▽ More
It is known that ab initio molecular dynamics (AIMD) simulations of liquid water, based on the generalized gradient approximation (GGA) to density functional theory (DFT), yield structural and diffusive properties in reasonable agreement with experiment only if artificially high temperatures are used in the simulations. The equilibrium density, at normal conditions, of DFT water has been recently shown by Schmidt et al. [J. Phys. chem. B, 113, 11959 (2009)] to be underestimated by different GGA functionals for exchange and correlation, and corrected by the addition of interatomic pair potentials to describe van derWaals (vdW) interactions. In this contribution we present a DFTAIMD study of liquid water using several GGA functionals as well as the van der Waals density functional (vdW-DF) of Dion et al. [Phys. Rev. Lett. 92, 246401(2004)]. As expected, we find that the density of water is grossly underestimated by GGA functionals. When a vdW-DF is used, the density improves drastically and the experimental diffusivity is reproduced without the need of thermal corrections. We analyze the origin of the density differences between all the functionals. We show that the vdW-DF increases the population of non-H-bonded interstitial sites, at distances between the first and second coordination shells. However, it excessively weakens the H-bond network, collapsing the second coordination shell. This structural problem is partially associated to the choice of GGA exchange in the vdW-DF. We show that a different choice for the exchange functional is enough to achieve an overall improvement both in structure and diffusivity.
△ Less
Submitted 7 September, 2010; v1 submitted 15 May, 2010;
originally announced May 2010.
-
Optimal Fourier filtering of a function that is strictly confined within a sphere
Authors:
Jose M. Soler,
Eduardo Anglada
Abstract:
We present an alternative method to filter a distribution, that is strictly confined within a sphere of given radius $r_c$, so that its Fourier transform is optimally confined within another sphere of radius $k_c$.
In electronic structure methods, it can be used to generate optimized pseudopotentials, pseudocore charge distributions, and pseudo atomic orbital basis sets.
We present an alternative method to filter a distribution, that is strictly confined within a sphere of given radius $r_c$, so that its Fourier transform is optimally confined within another sphere of radius $k_c$.
In electronic structure methods, it can be used to generate optimized pseudopotentials, pseudocore charge distributions, and pseudo atomic orbital basis sets.
△ Less
Submitted 31 July, 2008;
originally announced July 2008.
-
A Rational Indicator of Scientific Creativity
Authors:
Jose M. Soler
Abstract:
A model is proposed for the creation and transmission of scientific knowledge, based on the network of citations among research articles. The model allows to assign to each article a nonnegative value for its creativity, i. e. its creation of new knowledge. If the entire publication network is truncated to the first neighbors of an article (the n references that it makes and the m citations that…
▽ More
A model is proposed for the creation and transmission of scientific knowledge, based on the network of citations among research articles. The model allows to assign to each article a nonnegative value for its creativity, i. e. its creation of new knowledge. If the entire publication network is truncated to the first neighbors of an article (the n references that it makes and the m citations that it receives), its creativity value becomes a simple function of n and m. After splitting the creativity of each article among its authors, the cumulative creativity of an author is then proposed as an indicator of her or his merit of research. In contrast with other merit indicators, this creativity index yields similar values for the top scientists in two very different areas (life sciences and physics), thus offering good promise for interdisciplinary analyses.
△ Less
Submitted 1 August, 2006;
originally announced August 2006.
-
Filtering a distribution simultaneously in real and Fourier space
Authors:
Eduardo Anglada,
Jose M. Soler
Abstract:
We present a method to filter a distribution so that it is confined within a sphere of given radius r_c and, simultaneously, whose Fourier transform is optimally confined within a sphere of radius k_c. Our procedure may have several applications in the field of electronic structure methods, like the generation of optimized pseudopotentials and localized pseudocore charge distributions. As an exa…
▽ More
We present a method to filter a distribution so that it is confined within a sphere of given radius r_c and, simultaneously, whose Fourier transform is optimally confined within a sphere of radius k_c. Our procedure may have several applications in the field of electronic structure methods, like the generation of optimized pseudopotentials and localized pseudocore charge distributions. As an example, we describe a particular application within the SIESTA method for density functional calculations, in removing the spurious rippling of the energy surface generated by the integrations in a real space grid.
△ Less
Submitted 22 December, 2005;
originally announced December 2005.
-
Density functional calculations of planar DNA base-pairs
Authors:
Maider Machado,
Pablo Ordejon,
Emilio Artacho,
Daniel Sanchez-Portal,
Jose M. Soler
Abstract:
We present a systematic Density Functional Theory (DFT) study of geometries and energies of the nucleic acid DNA bases (guanine, adenine, cytosine and thymine) and 30 different DNA base-pairs. We use a recently developed linear-scaling DFT scheme, which is specially suited for systems with large numbers of atoms. As a first step towards the study of large DNA systems, in this work: (i) We establ…
▽ More
We present a systematic Density Functional Theory (DFT) study of geometries and energies of the nucleic acid DNA bases (guanine, adenine, cytosine and thymine) and 30 different DNA base-pairs. We use a recently developed linear-scaling DFT scheme, which is specially suited for systems with large numbers of atoms. As a first step towards the study of large DNA systems, in this work: (i) We establish the reliability of the approximations of our method (including pseudopotentials and basis sets) for the description of the hydrogen-bonded base pairs, by comparing our results with those of former calculations. We show that the interaction energies at Hartree-Fock geometries are in very good agreement with those of second order Møller-Plesset (MP2) perturbation theory (the most accurate technique that can be applied at present for system of the sizes of the base-pairs). (ii) We perform DFT structural optimizations for the 30 different DNA base-pairs, only three of which had been previously studied with DFT. Our results provide information on the effect of correlation on the structure of the other 27 base pairs, for which only Hartree-Fock geometries were formerly available.
△ Less
Submitted 11 August, 1999;
originally announced August 1999.