Showing 1–18 of 18 results for author: Smith, R J

First Demonstration of the HeRALD Superfluid Helium Detector Concept

Authors: R. Anthony-Petersen, A. Biekert, C. L. Chang, Y. Chang, L. Chaplinsky, A. Dushkin, C. W. Fink, M. Garcia-Sciveres, W. Guo, S. A. Hertel, X. Li, J. Lin, R. Mahapatra, W. Matava, D. N. McKinsey, D. Z. Osterman, P. K. Patel, B. Penning, H. D. Pinckney, M. Platt, M. Pyle, Y. Qi, M. Reed, G. R. C Rischbieter, R. K. Romani , et al. (11 additional authors not shown)

Abstract: The SPICE/HeRALD collaboration is performing R&D to enable studies of sub-GeV dark matter models using a variety of target materials. Here we report our recent progress on instrumenting a superfluid $^4$He target mass with a transition-edge sensor based calorimeter to detect both atomic signals (scintillation) and $^4$He quasiparticle (phonon and roton) excitations. The sensitivity of HeRALD to th… ▽ More The SPICE/HeRALD collaboration is performing R&D to enable studies of sub-GeV dark matter models using a variety of target materials. Here we report our recent progress on instrumenting a superfluid $^4$He target mass with a transition-edge sensor based calorimeter to detect both atomic signals (scintillation) and $^4$He quasiparticle (phonon and roton) excitations. The sensitivity of HeRALD to the critical "quantum evaporation" signal from $^4$He quasiparticles requires us to block the superfluid film flow to the calorimeter. We have developed a heat-free film-blocking method employing an unoxidized Cs film, which we implemented in a prototype "HeRALD v0.1" detector of ~10 g target mass. This article reports initial studies of the atomic and quasiparticle signal channels. A key result of this work is the measurement of the quantum evaporation channel's gain of 0.15 $\pm$ 0.01, which will enable $^4$He-based dark matter experiments in the near term. With this gain the HeRALD detector reported here has an energy threshold of 145 eV at 5 sigma, which would be sensitive to dark matter masses down to 220 MeV/c$^2$. △ Less

Submitted 4 November, 2024; v1 submitted 21 July, 2023; originally announced July 2023.

Comments: 14 pages, 9 figures

A portable and high intensity 24 keV neutron source based on $^{124}$Sb-$^{9}$Be photoneutrons and an iron filter

Authors: A. Biekert, C. Chang, L. Chaplinsky, C. W. Fink, W. D. Frey, M. Garcia-Sciveres, W. Guo, S. A. Hertel, X. Li, J. Lin, M. Lisovenko, R. Mahapatra, D. N. McKinsey, S. Mehrotra, N. Mirabolfathi, P. K. Patel, B. Penning, H. D. Pinckney, M. Reed, R. K. Romani, B. Sadoulet, R. J. Smith, P. Sorensen, B. Suerfu, A. Suzuki , et al. (5 additional authors not shown)

Abstract: A portable monoenergetic 24 keV neutron source based on the $^{124}$Sb-$^9$Be photoneutron reaction and an iron filter has been constructed and characterized. The coincidence of the neutron energy from SbBe and the low interaction cross-section with iron (mean free path up to 29 cm) makes pure iron specially suited to shield against gamma rays from $^{124}$Sb decays while letting through the neutr… ▽ More A portable monoenergetic 24 keV neutron source based on the $^{124}$Sb-$^9$Be photoneutron reaction and an iron filter has been constructed and characterized. The coincidence of the neutron energy from SbBe and the low interaction cross-section with iron (mean free path up to 29 cm) makes pure iron specially suited to shield against gamma rays from $^{124}$Sb decays while letting through the neutrons. To increase the $^{124}$Sb activity and thus the neutron flux, a $>$1 GBq $^{124}$Sb source was produced by irradiating a natural Sb metal pellet with a high flux of thermal neutrons in a nuclear reactor. The design of the source shielding structure makes for easy transportation and deployment. A hydrogen gas proportional counter is used to characterize the neutrons emitted by the source and a NaI detector is used for gamma background characterization. At the exit opening of the neutron beam, the characterization determined the neutron flux in the energy range 20-25 keV to be 5.36$\pm$0.20 neutrons per cm$^2$ per second and the total gamma flux to be 213$\pm$6 gammas per cm$^2$ per second (numbers scaled to 1 GBq activity of the $^{124}$Sb source). A liquid scintillator detector is demonstrated to be sensitive to neutrons with incident kinetic energies from 8 to 17 keV, so it can be paired with the source as a backing detector for neutron scattering calibration experiments. This photoneutron source provides a good tool for in-situ low energy nuclear recoil calibration for dark matter experiments and coherent elastic neutrino-nucleus scattering experiments. △ Less

Submitted 7 February, 2023; originally announced February 2023.

Comments: 11 pages, 20 figures

A backing detector for order-keV neutrons

Authors: A. Biekert, L. Chaplinsky, C. W. Fink, M. Garcia-Sciveres, W. C. Gillis, W. Guo, S. A. Hertel, G. Heuermann, X. Li, J. Lin, R. Mahapatra, D. N. McKinsey, P. K. Patel, B. Penning, H. D. Pinckney, M. Platt, M. Pyle, R. K. Romani, A. Serafin, R. J. Smith, B. Suerfu, V. Velan, G. Wang, Y. Wang, S. L. Watkins , et al. (1 additional authors not shown)

Abstract: We have designed and tested a large-area (0.15~m$^2$) neutron detector based on neutron capture on \ce{^{6}Li}. The neutron detector design has been optimized for the purpose of tagging the scattering angle of keV-scale neutrons. These neutron detectors would be employed to calibrate the low-energy ($<$100 eV) nuclear recoil in detectors for dark matter and coherent elastic neutrino nucleus scatte… ▽ More We have designed and tested a large-area (0.15~m$^2$) neutron detector based on neutron capture on \ce{^{6}Li}. The neutron detector design has been optimized for the purpose of tagging the scattering angle of keV-scale neutrons. These neutron detectors would be employed to calibrate the low-energy ($<$100 eV) nuclear recoil in detectors for dark matter and coherent elastic neutrino nucleus scattering (CE$ν$NS). We describe the design, construction, and characterization of a prototype. The prototype is designed to have a tagging efficiency of $\sim$25\% at the relevant $\mathcal{O}$(keV) neutron energies, and with a mean capture time of $\sim$17$~μ$s. The prototype was characterized using a \ce{^{252}Cf} neutron source and agreement with the simulation was observed within a few percent level. △ Less

Submitted 9 March, 2022; originally announced March 2022.

Comments: 25 pages, 14 figures, and 2 tables

A new convergence analysis of the particle method for the Camassa-Holm equation

Authors: Lennon Ó Náraigh, Khang Ee Pang, Richard J. Smith

Abstract: We present a new self-contained convergence analysis of the particle method that can be applied to a range of PDEs, including the Camassa-Holm equation. It is a development of the analysis of Chertock, Liu and Pendleton, which used compactness properties of spaces of functions having bounded variation. In our analysis we establish solutions by applying a metric Arzelà-Ascoli compactness result to… ▽ More We present a new self-contained convergence analysis of the particle method that can be applied to a range of PDEs, including the Camassa-Holm equation. It is a development of the analysis of Chertock, Liu and Pendleton, which used compactness properties of spaces of functions having bounded variation. In our analysis we establish solutions by applying a metric Arzelà-Ascoli compactness result to a space of measure-valued functions equipped with the bounded Lipschitz metric. All the convergence and regularity results of the previous analysis follow as a consequence and are computationally easier to establish. △ Less

Submitted 9 February, 2023; v1 submitted 20 December, 2021; originally announced December 2021.

Comments: 14 pages, 0 figures

MSC Class: 35D30; 46N20; 26A45

Scintillation yield from electronic and nuclear recoils in superfluid $^4$He

Authors: SPICE/HeRALD Collaboration, :, A. Biekert, C. Chang, C. W. Fink, M. Garcia-Sciveres, E. C. Glazer, W. Guo, S. A. Hertel, S. Kravitz, J. Lin, M. Lisovenko, R. Mahapatra, D. N. McKinsey, J. S. Nguyen, V. Novosad, W. Page, P. K. Patel, B. Penning, H. D. Pinckney, M. Pyle, R. K. Romani, A. S. Seilnacht, A. Serafin, R. J. Smith , et al. (9 additional authors not shown)

Abstract: Superfluid $^4$He is a promising target material for direct detection of light ($<$ 1 GeV) dark matter. Possible signal channels available for readout in this medium include prompt photons, triplet excimers, and roton and phonon quasiparticles. The relative yield of these signals has implications for the sensitivity and discrimination power of a superfluid $^4$He dark matter detector. Using a 16~c… ▽ More Superfluid $^4$He is a promising target material for direct detection of light ($<$ 1 GeV) dark matter. Possible signal channels available for readout in this medium include prompt photons, triplet excimers, and roton and phonon quasiparticles. The relative yield of these signals has implications for the sensitivity and discrimination power of a superfluid $^4$He dark matter detector. Using a 16~cm$^3$ volume of 1.75~K superfluid $^4$He read out by six immersed photomultiplier tubes, we measured the scintillation from electronic recoils ranging between 36.3 and 185 keV$_\mathrm{ee}$, yielding a mean signal size of $1.25^{+0.03}_{-0.03}$~phe/keV$_\mathrm{ee}$, and nuclear recoils from 53.2 to 1090 keV$_\mathrm{nr}$. We compare the results of our relative scintillation yield measurements to an existing semiempirical model based on helium-helium and electron-helium interaction cross sections. We also study the behavior of delayed scintillation components as a function of recoil type and energy, a further avenue for signal discrimination in superfluid $^4$He. △ Less

Submitted 14 May, 2022; v1 submitted 4 August, 2021; originally announced August 2021.

Comments: 17 pages, 19 figures

Journal ref: Phys. Rev. D 105, 092005 (2022)

Controlling $T_c$ of Iridium Films Using the Proximity Effect

Authors: R. Hennings-Yeomans, C. L. Chang, J. Ding, A. Drobizhev, B. K. Fujikawa, S. Han, G. Karapetrov, Yu. G. Kolomensky, V. Novosad, T. O'Donnell, J. L. Ouellet, J. Pearson, T. Polakovic, D. Reggio, B. Schmidt, B. Sheff, V. Singh, R. J. Smith, G. Wang, B. Welliver, V. G. Yefremenko, J. Zhang

Abstract: A superconducting Transition-Edge Sensor (TES) with low-$T_c$ is essential in a high resolution calorimetric detection. With a motivation of developing sensitive calorimeters for applications in cryogenic neutrinoless double beta decay searches, we have been investigating methods to reduce the $T_c$ of an Ir film down to 20 mK. Utilizing the proximity effect between a superconductor and a normal m… ▽ More A superconducting Transition-Edge Sensor (TES) with low-$T_c$ is essential in a high resolution calorimetric detection. With a motivation of developing sensitive calorimeters for applications in cryogenic neutrinoless double beta decay searches, we have been investigating methods to reduce the $T_c$ of an Ir film down to 20 mK. Utilizing the proximity effect between a superconductor and a normal metal, we found two room temperature fabrication recipes of making Ir-based low-$T_c$ films. In the first approach, an Ir film sandwiched between two Au films, a Au/Ir/Au trilayer, has a tunable $T_c$ in the range of 20-100 mK depending on the relative thicknesses. In the second approach, a paramagnetic Pt thin film is used to create Ir/Pt bilayer with a tunable $T_c$ in the same range. We present detailed study of fabrication and characterization of Ir-based low-$T_c$ films, and compare the experimental results to theoretical models. We show that Ir-based films with predictable and reproducible critical temperature can be consistently fabricated for use in large scale detector applications. △ Less

Submitted 2 October, 2020; originally announced October 2020.

Comments: 5 figures, accepted in the Journal of Applied Physics

The LUX-ZEPLIN (LZ) radioactivity and cleanliness control programs

Authors: D. S. Akerib, C. W. Akerlof, D. Yu. Akimov, A. Alquahtani, S. K. Alsum, T. J. Anderson, N. Angelides, H. M. Araújo, A. Arbuckle, J. E. Armstrong, M. Arthurs, H. Auyeung, S. Aviles, X. Bai, A. J. Bailey, J. Balajthy, S. Balashov, J. Bang, M. J. Barry, D. Bauer, P. Bauer, A. Baxter, J. Belle, P. Beltrame, J. Bensinger , et al. (365 additional authors not shown)

Abstract: LUX-ZEPLIN (LZ) is a second-generation direct dark matter experiment with spin-independent WIMP-nucleon scattering sensitivity above $1.4 \times 10^{-48}$ cm$^{2}$ for a WIMP mass of 40 GeV/c$^{2}$ and a 1000 d exposure. LZ achieves this sensitivity through a combination of a large 5.6 t fiducial volume, active inner and outer veto systems, and radio-pure construction using materials with inherent… ▽ More LUX-ZEPLIN (LZ) is a second-generation direct dark matter experiment with spin-independent WIMP-nucleon scattering sensitivity above $1.4 \times 10^{-48}$ cm$^{2}$ for a WIMP mass of 40 GeV/c$^{2}$ and a 1000 d exposure. LZ achieves this sensitivity through a combination of a large 5.6 t fiducial volume, active inner and outer veto systems, and radio-pure construction using materials with inherently low radioactivity content. The LZ collaboration performed an extensive radioassay campaign over a period of six years to inform material selection for construction and provide an input to the experimental background model against which any possible signal excess may be evaluated. The campaign and its results are described in this paper. We present assays of dust and radon daughters depositing on the surface of components as well as cleanliness controls necessary to maintain background expectations through detector construction and assembly. Finally, examples from the campaign to highlight fixed contaminant radioassays for the LZ photomultiplier tubes, quality control and quality assurance procedures through fabrication, radon emanation measurements of major sub-systems, and bespoke detector systems to assay scintillator are presented. △ Less

Submitted 28 February, 2022; v1 submitted 3 June, 2020; originally announced June 2020.

Comments: 45 pages (79 inc. tables), 7 figures, 9 tables

Journal ref: The European Physical Journal C, Volume 80, Article number: 1044 (2020)

Tailored elastic surface to body wave Umklapp conversion

Authors: Gregory J. Chaplain, Jacopo M. De Ponti, Andrea Colombi, Rafael Fuentes-Dominguez, Paul Dryburg, Don Pieris, Richard J. Smith, Adam Clare, Matt Clark, Richard V. Craster

Abstract: Elastic waves guided along surfaces dominate applications in geophysics, ultrasonic inspection, mechanical vibration, and surface acoustic wave devices; precise manipulation of surface Rayleigh waves and their coupling with polarized body waves presents a challenge that offers to unlock the flexibility in wave transport required for efficient energy harvesting and vibration mitigation devices. We… ▽ More Elastic waves guided along surfaces dominate applications in geophysics, ultrasonic inspection, mechanical vibration, and surface acoustic wave devices; precise manipulation of surface Rayleigh waves and their coupling with polarized body waves presents a challenge that offers to unlock the flexibility in wave transport required for efficient energy harvesting and vibration mitigation devices. We design elastic metasurfaces, consisting of a graded array of rod resonators attached to an elastic substrate that, together with critical insight from Umklapp scattering in phonon-electron systems, allow us to leverage the transfer of crystal momentum; we mode-convert Rayleigh surface waves into bulk waves that form tunable beams. Experiments, theory and simulation verify that these tailored Umklapp mechanisms play a key role in coupling surface Rayleigh waves to reversed bulk shear and compressional waves independently, thereby creating passive self-phased arrays allowing for tunable redirection and wave focusing within the bulk medium. △ Less

Submitted 11 December, 2019; originally announced December 2019.

Comments: 5 pages of text with 3 figures plus 3 pages of supplemental text with 5 supplemental figures

The LUX-ZEPLIN (LZ) Experiment

Authors: The LZ Collaboration, D. S. Akerib, C. W. Akerlof, D. Yu. Akimov, A. Alquahtani, S. K. Alsum, T. J. Anderson, N. Angelides, H. M. Araújo, A. Arbuckle, J. E. Armstrong, M. Arthurs, H. Auyeung, X. Bai, A. J. Bailey, J. Balajthy, S. Balashov, J. Bang, M. J. Barry, J. Barthel, D. Bauer, P. Bauer, A. Baxter, J. Belle, P. Beltrame , et al. (357 additional authors not shown)

Abstract: We describe the design and assembly of the LUX-ZEPLIN experiment, a direct detection search for cosmic WIMP dark matter particles. The centerpiece of the experiment is a large liquid xenon time projection chamber sensitive to low energy nuclear recoils. Rejection of backgrounds is enhanced by a Xe skin veto detector and by a liquid scintillator Outer Detector loaded with gadolinium for efficient n… ▽ More We describe the design and assembly of the LUX-ZEPLIN experiment, a direct detection search for cosmic WIMP dark matter particles. The centerpiece of the experiment is a large liquid xenon time projection chamber sensitive to low energy nuclear recoils. Rejection of backgrounds is enhanced by a Xe skin veto detector and by a liquid scintillator Outer Detector loaded with gadolinium for efficient neutron capture and tagging. LZ is located in the Davis Cavern at the 4850' level of the Sanford Underground Research Facility in Lead, South Dakota, USA. We describe the major subsystems of the experiment and its key design features and requirements. △ Less

Submitted 3 November, 2019; v1 submitted 20 October, 2019; originally announced October 2019.

Measurements of Angle-Resolved Reflectivity of PTFE in Liquid Xenon with IBEX

Authors: S. Kravitz, R. J. Smith, L. Hagaman, E. P. Bernard, D. N. McKinsey, L. Rudd, L. Tvrznikova, G. D. Orebi Gann, M. Sakai

Abstract: Liquid xenon particle detectors rely on excellent light collection efficiency for their performance. This depends on the high reflectivity of polytetrafluoroethylene (PTFE) at the xenon scintillation wavelength of 178 nm, but the angular dependence of this reflectivity is not well-understood. IBEX is designed to directly measure the angular distribution of xenon scintillation light reflected off P… ▽ More Liquid xenon particle detectors rely on excellent light collection efficiency for their performance. This depends on the high reflectivity of polytetrafluoroethylene (PTFE) at the xenon scintillation wavelength of 178 nm, but the angular dependence of this reflectivity is not well-understood. IBEX is designed to directly measure the angular distribution of xenon scintillation light reflected off PTFE in liquid xenon. These measurements are fully described by a microphysical reflectivity model with few free parameters. Dependence on PTFE type, surface finish, xenon pressure, and wavelength of incident light is explored. Total internal reflection is observed, which results in the dominance of specular over diffuse reflection and a reflectivity near 100% for high angles of incidence. △ Less

Submitted 30 March, 2020; v1 submitted 18 September, 2019; originally announced September 2019.

Comments: 21 pages, 10 figures

Journal ref: Eur. Phys. J. C 80, 262 (2020)

Controlling $T_c$ of Iridium films using interfacial proximity effects

Authors: R. Hennings-Yeomans, C. L. Chang, J. Ding, A. Drobizhev, B. K. Fujikawa, S. Han, G. Karapetrov, Yu. G. Kolomensky, V. Novosad, T. O'Donnell, J. L. Ouellet, J. Pearson, T. Polakovic, D. Reggio, B. Schmidt, B. Sheff, R. J. Smith, G. Wang, B. Welliver, V. G. Yefremenko

Abstract: High precision calorimetry using superconducting transition edge sensors requires the use of superconducting films with a suitable $T_c$, depending on the application. To advance high-precision macrocalorimetry, we require low-$T_c$ films that are easy to fabricate. A simple and effective way to suppress $T_c$ of superconducting Iridium through the proximity effect is demonstrated by using Ir/Pt b… ▽ More High precision calorimetry using superconducting transition edge sensors requires the use of superconducting films with a suitable $T_c$, depending on the application. To advance high-precision macrocalorimetry, we require low-$T_c$ films that are easy to fabricate. A simple and effective way to suppress $T_c$ of superconducting Iridium through the proximity effect is demonstrated by using Ir/Pt bilayers as well as Au/Ir/Au trilayers. While Ir/Au films fabricated by applying heat to the substrate during Ir deposition have been used in the past for superconducting sensors, we present results of $T_c$ suppression on Iridium by deposition at room temperature in Au/Ir/Au trilayers and Ir/Pt bilayers in the range of $\sim$20-100~mK. Measurements of the relative impedance between the Ir/Pt bilayers and Au/Ir/Au trilayers fabricated show factor of $\sim$10 higher values in the Ir/Pt case. These new films could play a key role in the development of scalable superconducting transition edge sensors that require low-$T_c$ films to minimize heat capacity and maximize energy resolution, while keeping high-yield fabrication methods. △ Less

Submitted 9 November, 2017; originally announced November 2017.

Comments: 5 journal pages, 4 figures

Enhanced sensing and conversion of ultrasonic Rayleigh waves by elastic metasurfaces

Authors: Andrea Colombi, Victoria Ageeva, Richard J. Smith, Adam Clare, Rikesh Patel, Matt Clark, Daniel Colquitt, Philippe Roux, Sebastien Guenneau, Richard V. Craster

Abstract: Recent years have heralded the introduction of metasurfaces that advantageously combine the vision of sub- wavelength wave manipulation, with the design, fabrication and size advantages associated with surface excitation. An important topic within metasurfaces is the tailored rainbow trapping and selective spatial frequency separation of electromagnetic and acoustic waves using graded metasurfaces… ▽ More Recent years have heralded the introduction of metasurfaces that advantageously combine the vision of sub- wavelength wave manipulation, with the design, fabrication and size advantages associated with surface excitation. An important topic within metasurfaces is the tailored rainbow trapping and selective spatial frequency separation of electromagnetic and acoustic waves using graded metasurfaces. This frequency dependent trapping and spatial frequency segregation has implications for energy concentrators and associated energy harvesting, sensing and wave filtering techniques. Different demonstrations of acoustic and electromagnetic rainbow devices have been performed, however not for deep elastic substrates that support both shear and compressional waves, together with surface Rayleigh waves; these allow not only for Rayleigh wave rainbow effects to exist but also for mode conversion from surface into bulk waves. We design, and test experimentally, a device creating not only elastic Rayleigh wave rainbow trapping, but also selective mode conversion of surface Rayleigh waves to shear waves. △ Less

Submitted 20 March, 2017; originally announced April 2017.

Comments: Article currently submitted for review. Comments are welcome!

Calibration of the Advanced LIGO detectors for the discovery of the binary black-hole merger GW150914

Authors: The LIGO Scientific Collaboration, B. P. Abbott, R. Abbott, T. D. Abbott, M. R. Abernathy, K. Ackley, C. Adams, P. Addesso, R. X. Adhikari, V. B. Adya, C. Affeldt, N. Aggarwal, O. D. Aguiar, A. Ain, P. Ajith, B. Allen, P. A. Altin, D. V. Amariutei, S. B. Anderson, W. G. Anderson, K. Arai, M. C. Araya, C. C. Arceneaux, J. S. Areeda, K. G. Arun , et al. (702 additional authors not shown)

Abstract: In Advanced LIGO, detection and astrophysical source parameter estimation of the binary black hole merger GW150914 requires a calibrated estimate of the gravitational-wave strain sensed by the detectors. Producing an estimate from each detector's differential arm length control loop readout signals requires applying time domain filters, which are designed from a frequency domain model of the detec… ▽ More In Advanced LIGO, detection and astrophysical source parameter estimation of the binary black hole merger GW150914 requires a calibrated estimate of the gravitational-wave strain sensed by the detectors. Producing an estimate from each detector's differential arm length control loop readout signals requires applying time domain filters, which are designed from a frequency domain model of the detector's gravitational-wave response. The gravitational-wave response model is determined by the detector's opto-mechanical response and the properties of its feedback control system. The measurements used to validate the model and characterize its uncertainty are derived primarily from a dedicated photon radiation pressure actuator, with cross-checks provided by optical and radio frequency references. We describe how the gravitational-wave readout signal is calibrated into equivalent gravitational-wave-induced strain and how the statistical uncertainties and systematic errors are assessed. Detector data collected over 38 calendar days, from September 12 to October 20, 2015, contain the event GW150914 and approximately 16 of coincident data used to estimate the event false alarm probability. The calibration uncertainty is less than 10% in magnitude and 10 degrees in phase across the relevant frequency band 20 Hz to 1 kHz. △ Less

Submitted 28 February, 2017; v1 submitted 11 February, 2016; originally announced February 2016.

Comments: 15 pages, 10 figures

Journal ref: Phys. Rev. D 95, 062003 (2017)

Biocompatibility of Pristine Graphene Monolayers, Nanosheets and Thin Films

Authors: Jennifer Conroy, Navin K. Verma, Ronan J. Smith, Ehsan Rezvani, Georg S. Duesberg, Jonathan N. Coleman, Yuri Volkov

Abstract: There is an increasing interest to develop nanoscale biocompatible graphene structures due to their desirable physicochemical properties, unlimited application opportunities and scalable production. Here we report the preparation, characterization and biocompatibility assessment of novel graphene flakes and their enabled thin films suitable for a wide range of biomedical and electronic application… ▽ More There is an increasing interest to develop nanoscale biocompatible graphene structures due to their desirable physicochemical properties, unlimited application opportunities and scalable production. Here we report the preparation, characterization and biocompatibility assessment of novel graphene flakes and their enabled thin films suitable for a wide range of biomedical and electronic applications. Graphene flakes were synthesized by a chemical vapour deposition method or a liquid-phase exfoliation procedure and then thin films were prepared by transferring graphene onto glass coverslips. Raman spectroscopy and transmission electron microscopy confirmed a predominantly monolayer and a high crystalline quality formation of graphene. The biocompatibility assessment of graphene thin films and graphene flakes was performed using cultured human lung epithelial cell line A549 employing a multimodal approach incorporating automated imaging, high content screening, real-time impedance sensing in combination with biochemical assays. No detectable changes in the cellular morphology or attachment of A549 cells growing on graphene thin films or cells exposed to graphene flakes (0.1 to 5 ug/mL) for 4 to 72 h was observed. Graphene treatments caused a very low level of increase in cellular production of reactive oxygen species in A549 cells, but no detectable damage to the nuclei such as changes in morphology, condensation or fragmentation was observed. In contrast, carbon black proved to be significantly more toxic than the graphene. These data open up a promising view of using graphene enabled composites for a diverse scope of safer applications. △ Less

Submitted 10 June, 2014; originally announced June 2014.

The impact of thermodynamics on gravitational collapse: filament formation and magnetic field amplification

Authors: Thomas Peters, Dominik R. G. Schleicher, Ralf S. Klessen, Robi Banerjee, Christoph Federrath, Rowan J. Smith, Sharanya Sur

Abstract: Stars form by the gravitational collapse of interstellar gas. The thermodynamic response of the gas can be characterized by an effective equation of state. It determines how gas heats up or cools as it gets compressed, and hence plays a key role in regulating the process of stellar birth on virtually all scales, ranging from individual star clusters up to the galaxy as a whole. We present a system… ▽ More Stars form by the gravitational collapse of interstellar gas. The thermodynamic response of the gas can be characterized by an effective equation of state. It determines how gas heats up or cools as it gets compressed, and hence plays a key role in regulating the process of stellar birth on virtually all scales, ranging from individual star clusters up to the galaxy as a whole. We present a systematic study of the impact of thermodynamics on gravitational collapse in the context of high-redshift star formation, but argue that our findings are also relevant for present-day star formation in molecular clouds. We consider a polytropic equation of state, P = k rho^Gamma, with both sub-isothermal exponents Gamma < 1 and super-isothermal exponents Gamma > 1. We find significant differences between these two cases. For Gamma > 1, pressure gradients slow down the contraction and lead to the formation of a virialized, turbulent core. Weak magnetic fields are strongly tangled and efficiently amplified via the small-scale turbulent dynamo on timescales corresponding to the eddy-turnover time at the viscous scale. For Gamma < 1, on the other hand, pressure support is not sufficient for the formation of such a core. Gravitational contraction proceeds much more rapidly and the flow develops very strong shocks, creating a network of intersecting sheets and extended filaments. The resulting magnetic field lines are very coherent and exhibit a considerable degree of order. Nevertheless, even under these conditions we still find exponential growth of the magnetic energy density in the kinematic regime. △ Less

Submitted 26 September, 2012; originally announced September 2012.

Journal ref: Astrophysical Journal Letters 760 (2012) L28

Computer-games for gravitational wave science outreach: Black Hole Pong and Space Time Quest

Authors: L. Carbone, C. Bond, D. Brown, F. Brueckner, K. Grover, D. Lodhia, C. M. F. Mingarelli, P. Fulda, R. J. E. Smith, R. Unwin, A. Vecchio, M. Wang, L. Whalley, A. Freise

Abstract: We have established a program aimed to the development of small computer applications and web applets to be used for educational purposes and to teach gravitational waves physics and technology, and for the general gravitational wave outreach activities. The computer programs are generated in collaboration with undergraduates and summer students as part of our teaching activities, and are freely d… ▽ More We have established a program aimed to the development of small computer applications and web applets to be used for educational purposes and to teach gravitational waves physics and technology, and for the general gravitational wave outreach activities. The computer programs are generated in collaboration with undergraduates and summer students as part of our teaching activities, and are freely distributed on a dedicated website. As part of this program, we have developed two computer-games related to gravitational wave science: 'Black Hole Pong' and 'Space Time Quest'. In this article we overview our computer related outreach activity, present and discuss the games and their educational aspects, and report on some positive feedback received. △ Less

Submitted 13 March, 2012; v1 submitted 16 November, 2011; originally announced November 2011.

Comments: To be published on `Journal of Physics: Conference Series' Proceedings of 9th Amaldi Conference on Gravitational Waves, Cardiff (UK) July 2011. 7 pages, 6 figures

Measurements of the T2K neutrino beam properties using the INGRID on-axis near detector

Authors: K. Abe, N. Abgrall, Y. Ajima, H. Aihara, J. B. Albert, C. Andreopoulos, B. Andrieu, M. D. Anerella, S. Aoki, O. Araoka, J. Argyriades, A. Ariga, T. Ariga, S. Assylbekov, D. Autiero, A. Badertscher, M. Barbi, G. J. Barker, G. Barr, M. Bass, M. Batkiewicz, F. Bay, S. Bentham, V. Berardi, B. E. Berger , et al. (407 additional authors not shown)

Abstract: Precise measurement of neutrino beam direction and intensity was achieved based on a new concept with modularized neutrino detectors. INGRID (Interactive Neutrino GRID) is an on-axis near detector for the T2K long baseline neutrino oscillation experiment. INGRID consists of 16 identical modules arranged in horizontal and vertical arrays around the beam center. The module has a sandwich structure o… ▽ More Precise measurement of neutrino beam direction and intensity was achieved based on a new concept with modularized neutrino detectors. INGRID (Interactive Neutrino GRID) is an on-axis near detector for the T2K long baseline neutrino oscillation experiment. INGRID consists of 16 identical modules arranged in horizontal and vertical arrays around the beam center. The module has a sandwich structure of iron target plates and scintillator trackers. INGRID directly monitors the muon neutrino beam profile center and intensity using the number of observed neutrino events in each module. The neutrino beam direction is measured with accuracy better than 0.4 mrad from the measured profile center. The normalized event rate is measured with 4% precision. △ Less

Submitted 14 November, 2011; originally announced November 2011.

Comments: 32 pages, 27 figures, submitted to Nucl. Instr. and Meth. A

The T2K Experiment

Authors: T2K Collaboration, K. Abe, N. Abgrall, H. Aihara, Y. Ajima, J. B. Albert, D. Allan, P. -A. Amaudruz, C. Andreopoulos, B. Andrieu, M. D. Anerella, C. Angelsen, S. Aoki, O. Araoka, J. Argyriades, A. Ariga, T. Ariga, S. Assylbekov, J. P. A. M. de André, D. Autiero, A. Badertscher, O. Ballester, M. Barbi, G. J. Barker, P. Baron , et al. (499 additional authors not shown)

Abstract: The T2K experiment is a long-baseline neutrino oscillation experiment. Its main goal is to measure the last unknown lepton sector mixing angle θ_{13} by observing ν_e appearance in a ν_μ beam. It also aims to make a precision measurement of the known oscillation parameters, Δm^{2}_{23} and sin^{2} 2θ_{23}, via ν_μ disappearance studies. Other goals of the experiment include various neutrino cross… ▽ More The T2K experiment is a long-baseline neutrino oscillation experiment. Its main goal is to measure the last unknown lepton sector mixing angle θ_{13} by observing ν_e appearance in a ν_μ beam. It also aims to make a precision measurement of the known oscillation parameters, Δm^{2}_{23} and sin^{2} 2θ_{23}, via ν_μ disappearance studies. Other goals of the experiment include various neutrino cross section measurements and sterile neutrino searches. The experiment uses an intense proton beam generated by the J-PARC accelerator in Tokai, Japan, and is composed of a neutrino beamline, a near detector complex (ND280), and a far detector (Super-Kamiokande) located 295 km away from J-PARC. This paper provides a comprehensive review of the instrumentation aspect of the T2K experiment and a summary of the vital information for each subsystem. △ Less

Submitted 8 June, 2011; v1 submitted 6 June, 2011; originally announced June 2011.

Comments: 33 pages, 32 figures, Submitted and accepted by NIM A. Editor: Prof. Chang Kee Jung, Department of Physics and Astronomy, SUNY Stony Brook, [email protected], 631-632-8108 Submit Edited to remove line numbers