Showing 1–50 of 66 results for author: Smith, N

New Molecular Dynamics Methods for Simulating Neutron Star Crusts with Superfluid Vortices

Authors: M. E. Caplan, N. T. Smith

Abstract: Superfluid vortices in neutron star crusts are thought to be pinned to the lattice of nuclei in the crust. The unpinning of superfluid vortices in spin glitches therefore motivates us to study the vortex-crust interaction explicitly with molecular dynamics. In this work, we present a new molecular dynamics methods to characterize the response of the crust to a rigid vortex. When vortex pinning for… ▽ More Superfluid vortices in neutron star crusts are thought to be pinned to the lattice of nuclei in the crust. The unpinning of superfluid vortices in spin glitches therefore motivates us to study the vortex-crust interaction explicitly with molecular dynamics. In this work, we present a new molecular dynamics methods to characterize the response of the crust to a rigid vortex. When vortex pinning forces and nearest neighbor Coulomb forces are comparable, we observe a qualitatively new phenomena of lattice entrainment with implications for the elastic evolution of the crust. △ Less

Submitted 6 July, 2025; originally announced July 2025.

Comments: 3 pages, 1 figure, published in RNAAS. Animation of Fig. 1 available in the "anc" folder (ancillary) files

Journal ref: RNAAS, 9, 162 (2025)

A Deep Learning Framework for Two-Dimensional, Multi-Frequency Propagation Factor Estimation

Authors: Sarah E. Wessinger, Leslie N. Smith, Jacob Gull, Jonathan Gehman, Zachary Beever, Andrew J. Kammerer

Abstract: Accurately estimating the refractive environment over multiple frequencies within the marine atmospheric boundary layer is crucial for the effective deployment of radar technologies. Traditional parabolic equation simulations, while effective, can be computationally expensive and time-intensive, limiting their practical application. This communication explores a novel approach using deep neural ne… ▽ More Accurately estimating the refractive environment over multiple frequencies within the marine atmospheric boundary layer is crucial for the effective deployment of radar technologies. Traditional parabolic equation simulations, while effective, can be computationally expensive and time-intensive, limiting their practical application. This communication explores a novel approach using deep neural networks to estimate the pattern propagation factor, a critical parameter for characterizing environmental impacts on signal propagation. Image-to-image translation generators designed to ingest modified refractivity data and generate predictions of pattern propagation factors over the same domain were developed. Findings demonstrate that deep neural networks can be trained to analyze multiple frequencies and reasonably predict the pattern propagation factor, offering an alternative to traditional methods. △ Less

Submitted 21 May, 2025; originally announced May 2025.

Comments: Submitted for publication

The Critical Importance of Software for HEP

Authors: HEP Software Foundation, :, Christina Agapopoulou, Claire Antel, Saptaparna Bhattacharya, Steven Gardiner, Krzysztof L. Genser, James Andrew Gooding, Alexander Held, Michel Hernandez Villanueva, Michel Jouvin, Tommaso Lari, Valeriia Lukashenko, Sudhir Malik, Alexander Moreno Briceño, Stephen Mrenna, Inês Ochoa, Joseph D. Osborn, Jim Pivarski, Alan Price, Eduardo Rodrigues, Richa Sharma, Nicholas Smith, Graeme Andrew Stewart, Anna Zaborowska , et al. (2 additional authors not shown)

Abstract: Particle physics has an ambitious and broad global experimental programme for the coming decades. Large investments in building new facilities are already underway or under consideration. Scaling the present processing power and data storage needs by the foreseen increase in data rates in the next decade for HL-LHC is not sustainable within the current budgets. As a result, a more efficient usage… ▽ More Particle physics has an ambitious and broad global experimental programme for the coming decades. Large investments in building new facilities are already underway or under consideration. Scaling the present processing power and data storage needs by the foreseen increase in data rates in the next decade for HL-LHC is not sustainable within the current budgets. As a result, a more efficient usage of computing resources is required in order to realise the physics potential of future experiments. Software and computing are an integral part of experimental design, trigger and data acquisition, simulation, reconstruction, and analysis, as well as related theoretical predictions. A significant investment in computing and software is therefore critical. Advances in software and computing, including artificial intelligence (AI) and machine learning (ML), will be key for solving these challenges. Making better use of new processing hardware such as graphical processing units (GPUs) or ARM chips is a growing trend. This forms part of a computing solution that makes efficient use of facilities and contributes to the reduction of the environmental footprint of HEP computing. The HEP community already provided a roadmap for software and computing for the last EPPSU, and this paper updates that, with a focus on the most resource critical parts of our data processing chain. △ Less

Submitted 12 June, 2025; v1 submitted 1 April, 2025; originally announced April 2025.

Nuclear recoil detection with color centers in bulk lithium fluoride

Authors: Gabriela A. Araujo, Laura Baudis, Nathaniel Bowden, Jordan Chapman, Anna Erickson, Mariano Guerrero Perez, Adam A. Hecht, Samuel C. Hedges, Patrick Huber, Vsevolod Ivanov, Igor Jovanovic, Giti A. Khodaparast, Brenden A. Magill, Jose Maria Mateos, Maverick Morrison, Nicholas W. G. Smith, Patrick Stengel, Stuti Surani, Nikita Vladimirov, Keegan Walkup, Christian Wittweg, Xianyi Zhang

Abstract: We present initial results on nuclear recoil detection based on the fluorescence of color centers created by nuclear recoils in lithium fluoride. We use gamma rays, fast and thermal neutrons, and study the difference in responses they induce, showing that this type of detector is rather insensitive to gamma rays. We use light-sheet fluorescence microscopy to image nuclear recoil tracks from fast a… ▽ More We present initial results on nuclear recoil detection based on the fluorescence of color centers created by nuclear recoils in lithium fluoride. We use gamma rays, fast and thermal neutrons, and study the difference in responses they induce, showing that this type of detector is rather insensitive to gamma rays. We use light-sheet fluorescence microscopy to image nuclear recoil tracks from fast and thermal neutron interactions deep inside a cubic-centimeter sized crystal and demonstrate automated feature extraction in three dimensions using machine learning tools. The number, size, and topology of the events agree with expectations based on simulations with TRIM. These results constitute the first step towards 10-1000g scale detectors with single-event sensitivity for applications such as the detection of dark matter particles, reactor neutrinos, and neutrons. △ Less

Submitted 26 March, 2025; originally announced March 2025.

Comments: 23 pages, 15 figures

Position Reconstruction in the DEAP-3600 Dark Matter Search Experiment

Authors: The DEAP Collaboration, P. Adhikari, R. Ajaj, M. Alpízar-Venegas, P. -A. Amaudruz, J. Anstey, G. R. Araujo, D. J. Auty, M. Baldwin, M. Batygov, B. Beltran, H. Benmansour, M. A. Bigentini, C. E. Bina, J. Bonatt, W. M. Bonivento, M. G. Boulay, B. Broerman, J. F. Bueno, P. M. Burghardt, A. Butcher, M. Cadeddu, B. Cai, M. Cárdenas-Montes, S. Cavuoti , et al. (139 additional authors not shown)

Abstract: In the DEAP-3600 dark matter search experiment, precise reconstruction of the positions of scattering events in liquid argon is key for background rejection and defining a fiducial volume that enhances dark matter candidate events identification. This paper describes three distinct position reconstruction algorithms employed by DEAP-3600, leveraging the spatial and temporal information provided by… ▽ More In the DEAP-3600 dark matter search experiment, precise reconstruction of the positions of scattering events in liquid argon is key for background rejection and defining a fiducial volume that enhances dark matter candidate events identification. This paper describes three distinct position reconstruction algorithms employed by DEAP-3600, leveraging the spatial and temporal information provided by photomultipliers surrounding a spherical liquid argon vessel. Two of these methods are maximum-likelihood algorithms: the first uses the spatial distribution of detected photoelectrons, while the second incorporates timing information from the detected scintillation light. Additionally, a machine learning approach based on the pattern of photoelectron counts across the photomultipliers is explored. △ Less

Submitted 13 March, 2025; originally announced March 2025.

Comments: 24 pages, 16 figures

Building robust surrogate models of laser-plasma interactions using large scale PIC simulation

Authors: Nathan Smith, Christopher Ridgers, Kate Lancaster, Chris Arran, Stuart Morris

Abstract: As the repetition rates of ultra-high intensity lasers increase, simulations used for the prediction of experimental results may need to be augmented with machine learning to keep up. In this paper, the usage of gaussian process regression in producing surrogate models of laser-plasma interactions from particle-in-cell simulations is investigated. Such a model retains the characteristic behaviour… ▽ More As the repetition rates of ultra-high intensity lasers increase, simulations used for the prediction of experimental results may need to be augmented with machine learning to keep up. In this paper, the usage of gaussian process regression in producing surrogate models of laser-plasma interactions from particle-in-cell simulations is investigated. Such a model retains the characteristic behaviour of the simulations but allows for faster on-demand results and estimation of statistical noise. A demonstrative model of Bremsstrahlung emission by hot electrons from a femtosecond timescale laser pulse in the $10^{20} - 10^{23}\;\mathrm{Wcm}^{-2}$ intensity range is produced using 800 simulations of such a laser-solid interaction from 1D hybrid-PIC. While the simulations required 84,000 CPU-hours to generate, subsequent training occurs on the order of a minute on a single core and prediction takes only a fraction of a second. The model trained on this data is then compared against analytical expectations. The efficiency of training the model and its subsequent ability to distinguish types of noise within the data are analysed, and as a result error bounds on the model are defined. △ Less

Submitted 4 November, 2024; originally announced November 2024.

Comments: 10 pages, 5 figures, Submitted to Plasma Physics and Controlled Fusion for 50th IOP meeting special issue

JWST/MIRI Observations of Newly Formed Dust in the Cold, Dense Shell of the Type IIn SN 2005ip

Authors: Melissa Shahbandeh, Ori D. Fox, Tea Temim, Eli Dwek, Arkaprabha Sarangi, Nathan Smith, Luc Dessart, Bryony Nickson, Michael Engesser, Alexei V. Filippenko, Thomas G. Brink, Weikang Zheng, Tamás Szalai, Joel Johansson, Armin Rest, Schuyler D. Van Dyk, Jennifer Andrews, Chris Ashall, Geoffrey C. Clayton, Ilse De Looze, James M. Derkacy, Michael Dulude, Ryan J. Foley, Suvi Gezari, Sebastian Gomez , et al. (20 additional authors not shown)

Abstract: Dust from core-collapse supernovae (CCSNe), specifically Type IIP SNe, has been suggested to be a significant source of the dust observed in high-redshift galaxies. CCSNe eject large amounts of newly formed heavy elements, which can condense into dust grains in the cooling ejecta. However, infrared (IR) observations of typical CCSNe generally measure dust masses that are too small to account for t… ▽ More Dust from core-collapse supernovae (CCSNe), specifically Type IIP SNe, has been suggested to be a significant source of the dust observed in high-redshift galaxies. CCSNe eject large amounts of newly formed heavy elements, which can condense into dust grains in the cooling ejecta. However, infrared (IR) observations of typical CCSNe generally measure dust masses that are too small to account for the dust production needed at high redshifts. Type IIn SNe, classified by their dense circumstellar medium (CSM), are also known to exhibit strong IR emission from warm dust, but the dust origin and heating mechanism have generally remained unconstrained because of limited observational capabilities in the mid-IR. Here, we present a JWST/MIRI Medium Resolution Spectrograph (MRS) spectrum of the Type IIn SN 2005ip nearly 17 years post-explosion. The Type IIn SN 2005ip is one of the longest-lasting and most well-studied SNe observed to date. Combined with a Spitzer mid-IR spectrum of SN 2005ip obtained in 2008, this data set provides a rare 15-year baseline, allowing for a unique investigation of the evolution of dust. The JWST spectrum shows a new high-mass dust component ($\gtrsim0.08$ M$_{\odot}$) that is not present in the earlier Spitzer spectrum. Our analysis shows dust likely formed over the past 15 years in the cold, dense shell (CDS), between the forward and reverse shocks. There is also a smaller mass of carbonaceous dust ($\gtrsim0.005$ M$_{\odot}$) in the ejecta. These observations provide new insights into the role of SN dust production, particularly within the CDS, and its potential contribution to the rapid dust enrichment of the early Universe. △ Less

Submitted 11 October, 2024; originally announced October 2024.

Dense Suspension Inertial Microfluidic Particle Theory (DENSE-IMPACT) Model for Elucidating Outer Wall Focusing at High Cell Densities

Authors: Soon Wei Daniel Lim, Yong How Kee, Scott Nicholas Allan Smith, Shan Mei Tan, An Eng Lim, Yuansheng Yang, Shireen Goh

Abstract: Inertial microfluidics has been limited to dilute particle concentrations due to defocusing (spreading out) at high particle concentrations. We observe a counterintuitive shift of focusing to the outer curved wall under high concentration flow, which contradicts the existing particle focusing theory. We developed a multiphase model incorporating lift forces and particle-particle interactions to ex… ▽ More Inertial microfluidics has been limited to dilute particle concentrations due to defocusing (spreading out) at high particle concentrations. We observe a counterintuitive shift of focusing to the outer curved wall under high concentration flow, which contradicts the existing particle focusing theory. We developed a multiphase model incorporating lift forces and particle-particle interactions to explain this behaviour. Numerical simulations validated by experimental data reveal the shift is governed by the ratio of the lift force strength to that of particle interaction frequencies. △ Less

Submitted 14 November, 2024; v1 submitted 19 September, 2024; originally announced September 2024.

Coarsening and parallelism with reduction multigrids for hyperbolic Boltzmann transport

Authors: S. Dargaville, R. P. Smedley-Stevenson, P. N. Smith, C. C. Pain

Abstract: Reduction multigrids have recently shown good performance in hyperbolic problems without the need for Gauss-Seidel smoothers. When applied to the hyperbolic limit of the Boltzmann Transport Equation (BTE), these methods result in very close to $\mathcal{O}(n)$ growth in work with problem size on unstructured grids. This scalability relies on the CF splitting producing an $A_\textrm{ff}$ block that… ▽ More Reduction multigrids have recently shown good performance in hyperbolic problems without the need for Gauss-Seidel smoothers. When applied to the hyperbolic limit of the Boltzmann Transport Equation (BTE), these methods result in very close to $\mathcal{O}(n)$ growth in work with problem size on unstructured grids. This scalability relies on the CF splitting producing an $A_\textrm{ff}$ block that is easy to invert. We introduce a parallel two-pass CF splitting designed to give diagonally dominant $A_\textrm{ff}$. The first pass computes a maximal independent set in the symmetrized strong connections. The second pass converts F-points to C-points based on the row-wise diagonal dominance of $A_\textrm{ff}$. We find this two-pass CF splitting outperforms common CF splittings available in hypre. Furthermore, parallelisation of reduction multigrids in hyperbolic problems is difficult as we require both long-range grid-transfer operators and slow coarsenings (with rates of $\sim$1/2 in both 2D and 3D). We find that good parallel performance in the setup and solve is dependent on several factors: repartitioning the coarse grids, reducing the number of active MPI ranks as we coarsen, truncating the multigrid hierarchy and applying a GMRES polynomial as a coarse-grid solver. We compare the performance of two different reduction multigrids, AIRG (that we developed previously) and the hypre implementation of $\ell$AIR. In the streaming limit with AIRG, we demonstrate 81\% weak scaling efficiency in the solve from 2 to 64 nodes (256 to 8196 cores) with only 8.8k unknowns per core, with solve times up to 5.9$\times$ smaller than the $\ell$AIR implementation in hypre. △ Less

Submitted 15 August, 2024; originally announced August 2024.

The LHCb VELO Upgrade Module Construction

Authors: K. Akiba, M. Alexander, C. Bertella, A. Biolchini, A. Bitadze, G. Bogdanova, S. Borghi, T. J. V. Bowcock, K. Bridges, M. Brock, A. T. Burke, J. Buytaert, W. Byczynski, J. Carroll, V. Coco, P. Collins, A. Davis, O. De Aguiar Francisco, K. De Bruyn, S. De Capua, K. De Roo, F. Doherty, L. Douglas, L. Dufour, R. Dumps , et al. (62 additional authors not shown)

Abstract: The LHCb detector has undergone a major upgrade for LHC Run 3. This Upgrade I detector facilitates operation at higher luminosity and utilises full-detector information at the LHC collision rate, critically including the use of vertex information. A new vertex locator system, the VELO Upgrade, has been constructed. The core element of the new VELO are the double-sided pixelated hybrid silicon dete… ▽ More The LHCb detector has undergone a major upgrade for LHC Run 3. This Upgrade I detector facilitates operation at higher luminosity and utilises full-detector information at the LHC collision rate, critically including the use of vertex information. A new vertex locator system, the VELO Upgrade, has been constructed. The core element of the new VELO are the double-sided pixelated hybrid silicon detector modules which operate in vacuum close to the LHC beam in a high radiation environment. The construction and quality assurance tests of these modules are described in this paper. The modules incorporate 200 \mum thick, n-on-p silicon sensors bump-bonded to 130 \nm technology ASICs. These are attached with high precision to a silicon microchannel substrate that uses evaporative CO$_2$ cooling. The ASICs are controlled and read out with flexible printed circuits that are glued to the substrate and wire-bonded to the chips. The mechanical support of the module is given by a carbon fibre plate, two carbon fibre rods and an aluminium plate. The sensor attachment was achieved with an average precision of 21 $\mathrm{μm}$, more than 99.5\% of all pixels are fully functional, and a thermal figure of merit of 3 \mathrm{Kcm^{2}W^{-1}}$ was achieved. The production of the modules was successfully completed in 2021, with the final assembly and installation completed in time for data taking in 2022. △ Less

Submitted 21 April, 2024; originally announced April 2024.

Report number: LHCb-DP-2024-001

Data-driven analysis of annual rain distributions

Authors: Yosef Ashkenazy, Naftali R. Smith

Abstract: Rainfall is an important component of the climate system and its statistical properties are vital for prediction purposes. In this study, we have developed a statistical method for constructing the distribution of annual precipitation. The method is based on the convolution of the measured monthly rainfall distributions and does not depend on any presumed annual rainfall distribution. Using a simp… ▽ More Rainfall is an important component of the climate system and its statistical properties are vital for prediction purposes. In this study, we have developed a statistical method for constructing the distribution of annual precipitation. The method is based on the convolution of the measured monthly rainfall distributions and does not depend on any presumed annual rainfall distribution. Using a simple statistical model, we demonstrate that our approach allows for a better prediction of extremely dry or wet years with a recurrence time several times longer than the original time series. The method that has been proposed can be utilized for other climate variables as well. △ Less

Submitted 22 May, 2024; v1 submitted 6 December, 2023; originally announced December 2023.

Comments: 26 pages, 18 figures

Journal ref: Phys. Rev. Research 6, 023187 (2024)

Optimal finite-differences discretization for the diffusion equation from the perspective of large-deviation theory

Authors: Naftali R. Smith

Abstract: When applying the finite-differences method to numerically solve the one-dimensional diffusion equation, one must choose discretization steps $Δx$, $Δt$ in space and time, respectively. By applying large-deviation theory on the discretized dynamics, we analyze the numerical errors due to the discretization, and find that the (relative) errors are especially large in regions of space where the conc… ▽ More When applying the finite-differences method to numerically solve the one-dimensional diffusion equation, one must choose discretization steps $Δx$, $Δt$ in space and time, respectively. By applying large-deviation theory on the discretized dynamics, we analyze the numerical errors due to the discretization, and find that the (relative) errors are especially large in regions of space where the concentration of particles is very small. We find that the choice $Δt = {Δx}^2 / (6D)$, where $D$ is the diffusion coefficient, gives optimal accuracy compared to any other choice (including, in particular, the limit $Δt \to 0$), thus reproducing the known result that may be obtained using truncation error analysis. In addition, we give quantitative estimates for the dynamical lengthscale that describes the size of the spatial region in which the numerical solution is accurate, and study its dependence on the discretization parameters. We then turn to study the advection-diffusion equation, and obtain explicit expressions for the optimal $Δt$ and other parameters of the finite-differences scheme, in terms of $Δx$, $D$ and the advection velocity. We apply these results to study large deviations of the area swept by a diffusing particle in one dimension, trapped by an external potential $\sim |x|$. We extend our analysis to higher dimensions by combining our results from the one dimensional case with the locally one-dimension method. △ Less

Submitted 8 April, 2024; v1 submitted 30 November, 2023; originally announced November 2023.

Comments: 12 pages, 5 figures

Journal ref: J. Stat. Mech. (2024) 043201

A Ceph S3 Object Data Store for HEP

Authors: Nick Smith, Bo Jayatilaka, David Mason, Oliver Gutsche, Alison Peisker, Robert Illingworth, Chris Jones

Abstract: We present a novel data format design that obviates the need for data tiers by storing individual event data products in column objects. The objects are stored and retrieved through Ceph S3 technology, with a layout designed to minimize metadata volume and maximize data processing parallelism. Performance benchmarks of data storage and retrieval are presented. We present a novel data format design that obviates the need for data tiers by storing individual event data products in column objects. The objects are stored and retrieved through Ceph S3 technology, with a layout designed to minimize metadata volume and maximize data processing parallelism. Performance benchmarks of data storage and retrieval are presented. △ Less

Submitted 27 November, 2023; originally announced November 2023.

Comments: CHEP2023 proceedings, to be published in EPJ Web of Conferences

Exact first-order effect of interactions on the ground-state energy of harmonically-confined fermions

Authors: Pierre Le Doussal, Naftali R. Smith, Nathan Argaman

Abstract: We consider a system of $N$ spinless fermions, interacting with each other via a power-law interaction $ε/r^n$, and trapped in an external harmonic potential $V(r) = r^2/2$, in $d=1,2,3$ dimensions. For any $0 < n < d+2$, we obtain the ground-state energy $E_N$ of the system perturbatively in $ε$, $E_{N}=E_{N}^{\left(0\right)}+εE_{N}^{\left(1\right)}+O\left(ε^{2}\right)$. We calculate… ▽ More We consider a system of $N$ spinless fermions, interacting with each other via a power-law interaction $ε/r^n$, and trapped in an external harmonic potential $V(r) = r^2/2$, in $d=1,2,3$ dimensions. For any $0 < n < d+2$, we obtain the ground-state energy $E_N$ of the system perturbatively in $ε$, $E_{N}=E_{N}^{\left(0\right)}+εE_{N}^{\left(1\right)}+O\left(ε^{2}\right)$. We calculate $E_{N}^{\left(1\right)}$ exactly, assuming that $N$ is such that the "outer shell" is filled. For the case of $n=1$ (corresponding to a Coulomb interaction for $d=3$), we extract the $N \gg 1$ behavior of $E_{N}^{\left(1\right)}$, focusing on the corrections to the exchange term with respect to the leading-order term that is predicted from the local density approximation applied to the Thomas-Fermi approximate density distribution. The leading correction contains a logarithmic divergence, and is of particular importance in the context of density functional theory. We also study the effect of the interactions on the fermions' spatial density. Finally, we find that our result for $E_{N}^{\left(1\right)}$ significantly simplifies in the case where $n$ is even. △ Less

Submitted 18 April, 2024; v1 submitted 15 November, 2023; originally announced November 2023.

Comments: 40 pages, 5 figures

Journal ref: SciPost Phys. 17, 038 (2024)

The LHCb upgrade I

Authors: LHCb collaboration, R. Aaij, A. S. W. Abdelmotteleb, C. Abellan Beteta, F. Abudinén, C. Achard, T. Ackernley, B. Adeva, M. Adinolfi, P. Adlarson, H. Afsharnia, C. Agapopoulou, C. A. Aidala, Z. Ajaltouni, S. Akar, K. Akiba, P. Albicocco, J. Albrecht, F. Alessio, M. Alexander, A. Alfonso Albero, Z. Aliouche, P. Alvarez Cartelle, R. Amalric, S. Amato , et al. (1298 additional authors not shown)

Abstract: The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their select… ▽ More The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software. △ Less

Submitted 10 September, 2024; v1 submitted 17 May, 2023; originally announced May 2023.

Comments: All figures and tables, along with any supplementary material and additional information, are available at http://lhcbproject.web.cern.ch/lhcbproject/Publications/LHCbProjectPublic/LHCb-DP-2022-002.html (LHCb public pages)

Report number: LHCb-DP-2022-002

Journal ref: JINST 19 (2024) P05065

The human factor: results of a small-angle scattering data analysis Round Robin

Authors: Brian R. Pauw, Glen J. Smales, Andy S. Anker, Daniel M. Balazs, Frederick L. Beyer, Ralf Bienert, Wim G. Bouwman, Ingo Breßler, Joachim Breternitz, Erik S Brok, Gary Bryant, Andrew J. Clulow, Erin R. Crater, Frédéric De Geuser, Alessandra Del Giudice, Jérôme Deumer, Sabrina Disch, Shankar Dutt, Kilian Frank, Emiliano Fratini, Elliot P. Gilbert, Marc Benjamin Hahn, James Hallett, Max Hohenschutz, Martin Hollamby , et al. (24 additional authors not shown)

Abstract: A Round Robin study has been carried out to estimate the impact of the human element in small-angle scattering data analysis. Four corrected datasets were provided to participants ready for analysis. All datasets were measured on samples containing spherical scatterers, with two datasets in dilute dispersions, and two from powders. Most of the 46 participants correctly identified the number of pop… ▽ More A Round Robin study has been carried out to estimate the impact of the human element in small-angle scattering data analysis. Four corrected datasets were provided to participants ready for analysis. All datasets were measured on samples containing spherical scatterers, with two datasets in dilute dispersions, and two from powders. Most of the 46 participants correctly identified the number of populations in the dilute dispersions, with half of the population mean entries within 1.5% and half of the population width entries within 40%, respectively. Due to the added complexity of the structure factor, much fewer people submitted answers on the powder datasets. For those that did, half of the entries for the means and widths were within 44% and 86% respectively. This Round Robin experiment highlights several causes for the discrepancies, for which solutions are proposed. △ Less

Submitted 7 March, 2023; originally announced March 2023.

Comments: 23 pages, 10 figures. For the original information sent to RR participants, see https://zenodo.org/record/7506365 . For the anonymized results and Jupyter notebook for analysis, see https://zenodo.org/record/7509710

Precision Measurement of the Specific Activity of $^{39}$Ar in Atmospheric Argon with the DEAP-3600 Detector

Authors: P. Adhikari, R. Ajaj, M. Alpízar-Venegas, P. -A. Amaudruz, J. Anstey, G. R. Araujo, D. J. Auty, M. Baldwin, M. Batygov, B. Beltran, H. Benmansour, C. E. Bina, J. Bonatt, W. Bonivento, M. G. Boulay, B. Broerman, J. F. Bueno, P. M. Burghardt, A. Butcher, M. Cadeddu, B. Cai, M. Cárdenas-Montes, S. Cavuoti, M. Chen, Y. Chen , et al. (125 additional authors not shown)

Abstract: The specific activity of the beta decay of $^{39}$Ar in atmospheric argon is measured using the DEAP-3600 detector. DEAP-3600, located 2 km underground at SNOLAB, uses a total of (3269 $\pm$ 24) kg of liquid argon distilled from the atmosphere to search for dark matter. This detector with very low background uses pulseshape discrimination to differentiate between nuclear recoils and electron recoi… ▽ More The specific activity of the beta decay of $^{39}$Ar in atmospheric argon is measured using the DEAP-3600 detector. DEAP-3600, located 2 km underground at SNOLAB, uses a total of (3269 $\pm$ 24) kg of liquid argon distilled from the atmosphere to search for dark matter. This detector with very low background uses pulseshape discrimination to differentiate between nuclear recoils and electron recoils and is well-suited to measure the decay of $^{39}$Ar. With 167 live-days of data, the measured specific activity at the time of atmospheric extraction is [0.964 $\pm$ 0.001 (stat) $\pm$ 0.024 (sys)] Bq/kg$_{\rm atmAr}$ which is consistent with results from other experiments. A cross-check analysis using different event selection criteria provides a consistent result. △ Less

Submitted 10 October, 2023; v1 submitted 27 February, 2023; originally announced February 2023.

Journal ref: Eur. Phys. J. C 83, 642 (2023)

Angular adaptivity in P0 space and reduced tolerance solves for Boltzmann transport

Authors: S. Dargaville, R. P. Smedley-Stevenson, P. N. Smith, C. C. Pain

Abstract: Previously we developed an adaptive method in angle, based on solving in Haar wavelet space with a matrix-free multigrid for Boltzmann transport problems. This method scalably mapped to the underlying P$^0$ space during every matrix-free matrix-vector product, however the multigrid method itself was not scalable in the streaming limit. To tackle this we recently built an iterative method based o… ▽ More Previously we developed an adaptive method in angle, based on solving in Haar wavelet space with a matrix-free multigrid for Boltzmann transport problems. This method scalably mapped to the underlying P$^0$ space during every matrix-free matrix-vector product, however the multigrid method itself was not scalable in the streaming limit. To tackle this we recently built an iterative method based on using an ideal restriction multigrid with frozen GMRES polynomials (AIRG) for Boltzmann transport that showed scalable work with uniform P$^0$ angle in the streaming and scattering limits. This paper details the practical requirements of using this new iterative method with angular adaptivity. Hence we modify our angular adaptivity to occur directly in P$^0$ space, rather than the Haar space. We then develop a modified stabilisation term for our FEM method that results in scalable growth in the number of non-zeros in the streaming operator with P$^0$ adaptivity. We can therefore combine the use of this iterative method with P$^0$ angular adaptivity to solve problems in both the scattering and streaming limits, with close to fixed work and memory use. We also present a CF splitting for multigrid methods based on element agglomeration combined with angular adaptivity, that can produce a semi-coarsening in the streaming limit without access to the matrix entries. The equivalence between our adapted P$^0$ and Haar wavelet spaces also allows us to introduce a robust convergence test for our iterative method when using regular adaptivity. This allows the early termination of the solve in each adapt step, reducing the cost of producing an adapted angular discretisation. △ Less

Submitted 16 January, 2023; originally announced January 2023.

AIR multigrid with GMRES polynomials (AIRG) and additive preconditioners for Boltzmann transport

Authors: S. Dargaville, R. P. Smedley-Stevenson, P. N. Smith, C. C. Pain

Abstract: We develop a reduction multigrid based on approximate ideal restriction (AIR) for use with asymmetric linear systems. We use fixed-order GMRES polynomials to approximate $A_\textrm{ff}^{-1}$ and we use these polynomials to build grid transfer operators and perform F-point smoothing. We can also apply a fixed sparsity to these polynomials to prevent fill-in. When applied in the streaming limit of… ▽ More We develop a reduction multigrid based on approximate ideal restriction (AIR) for use with asymmetric linear systems. We use fixed-order GMRES polynomials to approximate $A_\textrm{ff}^{-1}$ and we use these polynomials to build grid transfer operators and perform F-point smoothing. We can also apply a fixed sparsity to these polynomials to prevent fill-in. When applied in the streaming limit of the Boltzmann Transport Equation (BTE), with a P$^0$ angular discretisation and a low-memory spatial discretisation on unstructured grids, this "AIRG" multigrid used as a preconditioner to an outer GMRES iteration outperforms the lAIR implementation in hypre, with two to three times less work. AIRG is very close to scalable; we find either fixed work in the solve with slight growth in the setup, or slight growth in the solve with fixed work in the setup when using fixed sparsity. Using fixed sparsity we see less than 20% growth in the work of the solve with either 6 levels of spatial refinement or 3 levels of angular refinement. In problems with scattering AIRG performs as well as lAIR, but using the full matrix with scattering is not scalable. We then present an iterative method designed for use with scattering which uses the additive combination of two fixed-sparsity preconditioners applied to the angular flux; a single AIRG V-cycle on the streaming/removal operator and a DSA method with a CG FEM. We find with space or angle refinement our iterative method is very close to scalable with fixed memory use. △ Less

Submitted 9 June, 2023; v1 submitted 13 January, 2023; originally announced January 2023.

Neutron Tagging following Atmospheric Neutrino Events in a Water Cherenkov Detector

Authors: K. Abe, Y. Haga, Y. Hayato, K. Hiraide, K. Ieki, M. Ikeda, S. Imaizumi, K. Iyogi, J. Kameda, Y. Kanemura, Y. Kataoka, Y. Kato, Y. Kishimoto, S. Miki, S. Mine, M. Miura, T. Mochizuki, S. Moriyama, Y. Nagao, M. Nakahata, T. Nakajima, Y. Nakano, S. Nakayama, T. Okada, K. Okamoto , et al. (281 additional authors not shown)

Abstract: We present the development of neutron-tagging techniques in Super-Kamiokande IV using a neural network analysis. The detection efficiency of neutron capture on hydrogen is estimated to be 26%, with a mis-tag rate of 0.016 per neutrino event. The uncertainty of the tagging efficiency is estimated to be 9.0%. Measurement of the tagging efficiency with data from an Americium-Beryllium calibration agr… ▽ More We present the development of neutron-tagging techniques in Super-Kamiokande IV using a neural network analysis. The detection efficiency of neutron capture on hydrogen is estimated to be 26%, with a mis-tag rate of 0.016 per neutrino event. The uncertainty of the tagging efficiency is estimated to be 9.0%. Measurement of the tagging efficiency with data from an Americium-Beryllium calibration agrees with this value within 10%. The tagging procedure was performed on 3,244.4 days of SK-IV atmospheric neutrino data, identifying 18,091 neutrons in 26,473 neutrino events. The fitted neutron capture lifetime was measured as 218 \pm 9 μs. △ Less

Submitted 20 September, 2022; v1 submitted 18 September, 2022; originally announced September 2022.

Journal ref: JINST 17 P10029 (2022)

Collaborative Computing Support for Analysis Facilities Exploiting Software as Infrastructure Techniques

Authors: Maria Acosta Flechas, Garhan Attebury, Kenneth Bloom, Brian Bockelman, Lindsey Gray, Burt Holzman, Carl Lundstedt, Oksana Shadura, Nicholas Smith, John Thiltges

Abstract: Prior to the public release of Kubernetes it was difficult to conduct joint development of elaborate analysis facilities due to the highly non-homogeneous nature of hardware and network topology across compute facilities. However, since the advent of systems like Kubernetes and OpenShift, which provide declarative interfaces for building fault-tolerant and self-healing deployments of networked sof… ▽ More Prior to the public release of Kubernetes it was difficult to conduct joint development of elaborate analysis facilities due to the highly non-homogeneous nature of hardware and network topology across compute facilities. However, since the advent of systems like Kubernetes and OpenShift, which provide declarative interfaces for building fault-tolerant and self-healing deployments of networked software, it is possible for multiple institutes to collaborate more effectively since resource details are abstracted away through various forms of hardware and software virtualization. In this whitepaper we will outline the development of two analysis facilities: "Coffea-casa" at University of Nebraska Lincoln and the "Elastic Analysis Facility" at Fermilab, and how utilizing platform abstraction has improved the development of common software for each of these facilities, and future development plans made possible by this methodology. △ Less

Submitted 22 March, 2022; v1 submitted 18 March, 2022; originally announced March 2022.

Comments: contribution to Snowmass 2021

Report number: FERMILAB-FN-1163-SCD

Constraints on future analysis metadata systems in High Energy Physics

Authors: T. J. Khoo, A. Reinsvold Hall, N. Skidmore, S. Alderweireldt, J. Anders, C. Burr, W. Buttinger, P. David, L. Gouskos, L. Gray, S. Hageboeck, A. Krasznahorkay, P. Laycock, A. Lister, Z. Marshall, A. B. Meyer, T. Novak, S. Rappoccio, M. Ritter, E. Rodrigues, J. Rumsevicius, L. Sexton-Kennedy, N. Smith, G. A. Stewart, S. Wertz

Abstract: In High Energy Physics (HEP), analysis metadata comes in many forms -- from theoretical cross-sections, to calibration corrections, to details about file processing. Correctly applying metadata is a crucial and often time-consuming step in an analysis, but designing analysis metadata systems has historically received little direct attention. Among other considerations, an ideal metadata tool shoul… ▽ More In High Energy Physics (HEP), analysis metadata comes in many forms -- from theoretical cross-sections, to calibration corrections, to details about file processing. Correctly applying metadata is a crucial and often time-consuming step in an analysis, but designing analysis metadata systems has historically received little direct attention. Among other considerations, an ideal metadata tool should be easy to use by new analysers, should scale to large data volumes and diverse processing paradigms, and should enable future analysis reinterpretation. This document, which is the product of community discussions organised by the HEP Software Foundation, categorises types of metadata by scope and format and gives examples of current metadata solutions. Important design considerations for metadata systems, including sociological factors, analysis preservation efforts, and technical factors, are discussed. A list of best practices and technical requirements for future analysis metadata systems is presented. These best practices could guide the development of a future cross-experimental effort for analysis metadata tools. △ Less

Submitted 19 May, 2022; v1 submitted 1 March, 2022; originally announced March 2022.

Journal ref: Comput Softw Big Sci 6, 13 (2022)

Pulseshape discrimination against low-energy Ar-39 beta decays in liquid argon with 4.5 tonne-years of DEAP-3600 data

Authors: The DEAP Collaboration, P. Adhikari, R. Ajaj, M. Alpízar-Venegas, P. -A. Amaudruz, D. J. Auty, M. Batygov, B. Beltran, H. Benmansour, C. E. Bina, J. Bonatt, W. Bonivento, M. G. Boulay, B. Broerman, J. F. Bueno, P. M. Burghardt, A. Butcher, M. Cadeddu, B. Cai, M. Cárdenas-Montes, S. Cavuoti, M. Chen, Y. Chen, B. T. Cleveland, J. M. Corning , et al. (104 additional authors not shown)

Abstract: The DEAP-3600 detector searches for the scintillation signal from dark matter particles scattering on a 3.3 tonne liquid argon target. The largest background comes from $^{39}$Ar beta decays and is suppressed using pulseshape discrimination (PSD). We use two types of PSD algorithm: the prompt-fraction, which considers the fraction of the scintillation signal in a narrow and a wide time window ar… ▽ More The DEAP-3600 detector searches for the scintillation signal from dark matter particles scattering on a 3.3 tonne liquid argon target. The largest background comes from $^{39}$Ar beta decays and is suppressed using pulseshape discrimination (PSD). We use two types of PSD algorithm: the prompt-fraction, which considers the fraction of the scintillation signal in a narrow and a wide time window around the event peak, and the log-likelihood-ratio, which compares the observed photon arrival times to a signal and a background model. We furthermore use two algorithms to determine the number of photons detected at a given time: (1) simply dividing the charge of each PMT pulse by the charge of a single photoelectron, and (2) a likelihood analysis that considers the probability to detect a certain number of photons at a given time, based on a model for the scintillation pulseshape and for afterpulsing in the light detectors. The prompt-fraction performs approximately as well as the log-likelihood-ratio PSD algorithm if the photon detection times are not biased by detector effects. We explain this result using a model for the information carried by scintillation photons as a function of the time when they are detected. △ Less

Submitted 6 April, 2021; v1 submitted 22 March, 2021; originally announced March 2021.

Comments: 14 pages, 9 figures

Journal ref: Eur. Phys. J. C 81, 823 (2021)

A Numerical Fitting Routine for Frequency-domain Thermoreflectance Measurements of Nanoscale Material Systems having Arbitrary Geometries

Authors: Ronald J. Warzoha, Adam A. Wilson, Brian F. Donovan, Andrew N. Smith, Nicholas T. Vu, Trent Perry, Longnan Li, Nenad Miljkovic, Elizabeth Getto

Abstract: In this work, we develop a numerical fitting routine to extract multiple thermal parameters using frequency-domain thermoreflectance (FDTR) for materials having non-standard, non-semi-infinite geometries. The numerical fitting routine is predicated on either a 2-D or 3-D finite element analysis that permits the inclusion of non semi-infinite boundary conditions, which can not be considered in the… ▽ More In this work, we develop a numerical fitting routine to extract multiple thermal parameters using frequency-domain thermoreflectance (FDTR) for materials having non-standard, non-semi-infinite geometries. The numerical fitting routine is predicated on either a 2-D or 3-D finite element analysis that permits the inclusion of non semi-infinite boundary conditions, which can not be considered in the analytical solution to the heat diffusion equation in the frequency domain. We validate the fitting routine by comparing it to the analytical solution to the heat diffusion equation used within the wider literature for FDTR and known values of thermal conductivity for semi-infinite substrates (SiO2, Al2O3 and Si). We then demonstrate its capacity to extract the thermal properties of Si when etched into micropillars that have radii on the order of the pump beam. Experimental measurements of Si micropillars with circular cross-sections are provided and fit using the numerical fitting routine established as part of this work. Likewise, we show that the analytical solution is unsuitable for the extraction of thermal properties when the geometry deviates significantly from the standard semi-infinite case. This work is critical for measuring the thermal properties of materials having arbitrary geometries, including ultra-drawn glass fibers and laser gain media. △ Less

Submitted 21 September, 2020; originally announced September 2020.

An autoencoder-based reduced-order model for eigenvalue problems with application to neutron diffusion

Authors: Toby Phillips, Claire E. Heaney, Paul N. Smith, Christopher C. Pain

Abstract: Using an autoencoder for dimensionality reduction, this paper presents a novel projection-based reduced-order model for eigenvalue problems. Reduced-order modelling relies on finding suitable basis functions which define a low-dimensional space in which a high-dimensional system is approximated. Proper orthogonal decomposition (POD) and singular value decomposition (SVD) are often used for this pu… ▽ More Using an autoencoder for dimensionality reduction, this paper presents a novel projection-based reduced-order model for eigenvalue problems. Reduced-order modelling relies on finding suitable basis functions which define a low-dimensional space in which a high-dimensional system is approximated. Proper orthogonal decomposition (POD) and singular value decomposition (SVD) are often used for this purpose and yield an optimal linear subspace. Autoencoders provide a nonlinear alternative to POD/SVD, that may capture, more efficiently, features or patterns in the high-fidelity model results. Reduced-order models based on an autoencoder and a novel hybrid SVD-autoencoder are developed. These methods are compared with the standard POD-Galerkin approach and are applied to two test cases taken from the field of nuclear reactor physics. △ Less

Submitted 15 August, 2020; originally announced August 2020.

Comments: 35 pages, 33 figures

Ultrathin perpendicular free layers for lowering the switching current in STT-MRAM

Authors: Tiffany S. Santos, Goran Mihajlovic, Neil Smith, J. -L. Li, Matthew Carey, Jordan A. Katine, Bruce D. Terris

Abstract: The critical current density $J_{c0}$ required for switching the magnetization of the free layer (FL) in a spin-transfer torque magnetic random access memory (STT-MRAM) cell is proportional to the product of the damping parameter, saturation magnetization and thickness of the free layer, $αM_S t_F$. Conventional FLs have the structure CoFeB/nonmagnetic spacer/CoFeB. By reducing the spacer thicknes… ▽ More The critical current density $J_{c0}$ required for switching the magnetization of the free layer (FL) in a spin-transfer torque magnetic random access memory (STT-MRAM) cell is proportional to the product of the damping parameter, saturation magnetization and thickness of the free layer, $αM_S t_F$. Conventional FLs have the structure CoFeB/nonmagnetic spacer/CoFeB. By reducing the spacer thickness, W in our case, and also splitting the single W layer into two layers of sub-monolayer thickness, we have reduced $t_F$ while minimizing $α$ and maximizing $M_S$, ultimately leading to lower $J_{c0}$ while maintaining high thermal stability. Bottom-pinned MRAM cells with device diameter in the range of 55-130 nm were fabricated, and $J_{c0}$ is lowest for the thinnest (1.2 nm) FLs, down to 4 MA/cm$^2$ for 65 nm devices, $\sim$30% lower than 1.7 nm FLs. The thermal stability factor $Δ_{\mathrm{dw}}$, as high as 150 for the smallest device size, was determined using a domain wall reversal model from field switching probability measurements. With high $Δ_{\mathrm{dw}}$ and lowest $J_{c0}$, the thinnest FLs have the highest spin-transfer torque efficiency. △ Less

Submitted 4 August, 2020; originally announced August 2020.

Comments: 6 pages, 6 figures

Journal ref: Journal of Applied Physics 128, 113904 (2020)

The Scikit HEP Project -- overview and prospects

Authors: Eduardo Rodrigues, Benjamin Krikler, Chris Burr, Dmitri Smirnov, Hans Dembinski, Henry Schreiner, Jaydeep Nandi, Jim Pivarski, Matthew Feickert, Matthieu Marinangeli, Nick Smith, Pratyush Das

Abstract: Scikit-HEP is a community-driven and community-oriented project with the goal of providing an ecosystem for particle physics data analysis in Python. Scikit-HEP is a toolset of approximately twenty packages and a few "affiliated" packages. It expands the typical Python data analysis tools for particle physicists. Each package focuses on a particular topic, and interacts with other packages in the… ▽ More Scikit-HEP is a community-driven and community-oriented project with the goal of providing an ecosystem for particle physics data analysis in Python. Scikit-HEP is a toolset of approximately twenty packages and a few "affiliated" packages. It expands the typical Python data analysis tools for particle physicists. Each package focuses on a particular topic, and interacts with other packages in the toolset, where appropriate. Most of the packages are easy to install in many environments; much work has been done this year to provide binary "wheels" on PyPI and conda-forge packages. The Scikit-HEP project has been gaining interest and momentum, by building a user and developer community engaging collaboration across experiments. Some of the packages are being used by other communities, including the astroparticle physics community. An overview of the overall project and toolset will be presented, as well as a vision for development and sustainability. △ Less

Submitted 7 July, 2020; originally announced July 2020.

Comments: 6 pages, 3 figures, Proceedings of the 24th International Conference on Computing in High Energy and Nuclear Physics (CHEP 2019), Adelaide, Australia, 4-8 November 2019

Mechanical Ventilator Milano (MVM): A Novel Mechanical Ventilator Designed for Mass Scale Production in Response to the COVID-19 Pandemic

Authors: C. Galbiati, A. Abba, P. Agnes, P. Amaudruz, M. Arba, F. Ardellier-Desages, C. Badia, G. Batignani, G. Bellani, G. Bianchi, D. Bishop, V. Bocci, W. Bonivento, B. Bottino, M. Bouchard, S. Brice, G. Buccino, S. Bussino, A. Caminata, A. Capra, M. Caravati, M. Carlini, L. Carrozzi, J. M. Cela, B. Celano , et al. (123 additional authors not shown)

Abstract: Presented here is the design of the Mechanical Ventilator Milano (MVM), a novel mechanical ventilator designed for rapid mass production in response to the COVID-19 pandemic to address the urgent shortage of intensive therapy ventilators in many countries, and the growing difficulty in procuring these devices through normal supply chains across borders. This ventilator is an electro-mechanical equ… ▽ More Presented here is the design of the Mechanical Ventilator Milano (MVM), a novel mechanical ventilator designed for rapid mass production in response to the COVID-19 pandemic to address the urgent shortage of intensive therapy ventilators in many countries, and the growing difficulty in procuring these devices through normal supply chains across borders. This ventilator is an electro-mechanical equivalent of the old and reliable Manley Ventilator, and is able to operate in both pressure-controlled and pressure-supported ventilation modes. MVM is optimized for the COVID-19 emergency, thanks to the collaboration with medical doctors in the front line. MVM is designed for large-scale production in a short amount of time and at a limited cost, as it relays on off-the-shelf components, readily available worldwide. Operation of the MVM requires only a source of compressed oxygen (or compressed medical air) and electrical power. Initial tests of a prototype device with a breathing simulator are also presented. Further tests and developments are underway. At this stage the MVM is not yet a certified medical device but certification is in progress. △ Less

Submitted 10 April, 2020; v1 submitted 23 March, 2020; originally announced March 2020.

Report number: FERMILAB-PUB-21-601-ND-PPD-QIS-SCD

Journal ref: Phys.Fluids 33 (2021) 3, 037122

A Cryogenic Silicon Interferometer for Gravitational-wave Detection

Authors: Rana X Adhikari, Odylio Aguiar, Koji Arai, Bryan Barr, Riccardo Bassiri, Garilynn Billingsley, Ross Birney, David Blair, Joseph Briggs, Aidan F Brooks, Daniel D Brown, Huy-Tuong Cao, Marcio Constancio, Sam Cooper, Thomas Corbitt, Dennis Coyne, Edward Daw, Johannes Eichholz, Martin Fejer, Andreas Freise, Valery Frolov, Slawomir Gras, Anna Green, Hartmut Grote, Eric K Gustafson , et al. (86 additional authors not shown)

Abstract: The detection of gravitational waves from compact binary mergers by LIGO has opened the era of gravitational wave astronomy, revealing a previously hidden side of the cosmos. To maximize the reach of the existing LIGO observatory facilities, we have designed a new instrument that will have 5 times the range of Advanced LIGO, or greater than 100 times the event rate. Observations with this new inst… ▽ More The detection of gravitational waves from compact binary mergers by LIGO has opened the era of gravitational wave astronomy, revealing a previously hidden side of the cosmos. To maximize the reach of the existing LIGO observatory facilities, we have designed a new instrument that will have 5 times the range of Advanced LIGO, or greater than 100 times the event rate. Observations with this new instrument will make possible dramatic steps toward understanding the physics of the nearby universe, as well as observing the universe out to cosmological distances by the detection of binary black hole coalescences. This article presents the instrument design and a quantitative analysis of the anticipated noise floor. △ Less

Submitted 9 June, 2020; v1 submitted 29 January, 2020; originally announced January 2020.

Report number: LIGO-P1800072

The liquid-argon scintillation pulseshape in DEAP-3600

Authors: The DEAP collaboration, P. Adhikari, R. Ajaj, G. R. Araujoand M. Batygov, B. Beltran, C. E. Bina, M. G. Boulay, B. Broerman, J. F. Bueno, A. Butcher, B. Cai, M. Cárdenas-Montes, S. Cavuoti, Y. Chen, B. T. Cleveland, J. M. Corning, S. J. Daughertyand K. Dering, L. Doria, F. A. Duncan andM. Dunford, A. Erlandson, N. Fatemighomi, G. Fiorillo, A. Flower, R. J. Ford, R. Gagnon , et al. (76 additional authors not shown)

Abstract: DEAP-3600 is a liquid-argon scintillation detector looking for dark matter. Scintillation events in the liquid argon (LAr) are registered by 255 photomultiplier tubes (PMTs), and pulseshape discrimination (PSD) is used to suppress electromagnetic background events. The excellent PSD performance of LAr makes it a viable target for dark matter searches, and the LAr scintillation pulseshape discussed… ▽ More DEAP-3600 is a liquid-argon scintillation detector looking for dark matter. Scintillation events in the liquid argon (LAr) are registered by 255 photomultiplier tubes (PMTs), and pulseshape discrimination (PSD) is used to suppress electromagnetic background events. The excellent PSD performance of LAr makes it a viable target for dark matter searches, and the LAr scintillation pulseshape discussed here is the basis of PSD. The observed pulseshape is a combination of LAr scintillation physics with detector effects. We present a model for the pulseshape of electromagnetic background events in the energy region of interest for dark matter searches. The model is composed of a) LAr scintillation physics, including the so-called intermediate component, b) the time response of the TPB wavelength shifter, including delayed TPB emission at $\mathcal O$(ms) time-scales, and c) PMT response. TPB is the wavelength shifter of choice in most LAr detectors. We find that approximately 10\% of the intensity of the wavelength-shifted light is in a long-lived state of TPB. This causes light from an event to spill into subsequent events to an extent not usually accounted for in the design and data analysis of LAr-based detectors. △ Less

Submitted 8 June, 2020; v1 submitted 27 January, 2020; originally announced January 2020.

Journal ref: Eur. Phys. J. C 80, 303 (2020)

Observation of Dynamic Stark Resonances in Strong-Field Excitation

Authors: Dashavir Chetty, Rohan D. Glover, Bruno A. deHarak, Xiao-Min Tong, Han Xu, Tom Pauly, Noah Smith, Kathryn R. Hamilton, Klaus Bartschat, Joseph P. Ziegel, Nicolas Douguet, Andre N. Luiten, Philip S. Light, Igor V. Litvinyuk, Robert T. Sang

Abstract: We investigate AC Stark-shifted resonances in argon with ultrashort near-infrared pulses. Using 30 fs pulses we observe periodic enhancements of the excitation yield in the intensity regions corresponding to the absorption of 13 and 14 photons. By reducing the pulse duration to 6 fs with only a few optical cycles, we also demonstrate that the enhancements are significantly reduced beyond what is m… ▽ More We investigate AC Stark-shifted resonances in argon with ultrashort near-infrared pulses. Using 30 fs pulses we observe periodic enhancements of the excitation yield in the intensity regions corresponding to the absorption of 13 and 14 photons. By reducing the pulse duration to 6 fs with only a few optical cycles, we also demonstrate that the enhancements are significantly reduced beyond what is measurable in the experiment. Comparing these to numerical predictions, which are in quantitative agreement with experimental results, we find that even though the quantum-state distribution can be broad, the enhancements are largely due to efficient population of a select few AC Stark-shifted resonant states rather than the closing of an ionization channel. Because these resonances are dependent on the frequency and intensity of the laser field, the broad bandwidth of the 6 fs pulses means that the resonance condition is fulfilled across a large range of intensities. This is further exaggerated by volume-averaging effects, resulting in excitation of the $5g$ state at almost all intensities and reducing the apparent magnitude of the enhancements. For 30 fs pulses, volume averaging also broadens the quantum state distribution but the enhancements are still large enough to survive. In this case, selectivity of excitation to a single state is reduced below 25% of the relative population. However, an analysis of TDSE simulations indicates that excitation of up to 60% into a single state is possible if volume averaging can be eliminated and the intensity can be precisely controlled. △ Less

Submitted 2 April, 2020; v1 submitted 12 December, 2019; originally announced December 2019.

Comments: 7 pages, 5 figures

Journal ref: Phys. Rev. A 101, 053402 (2020)

Methodology to estimate ionospheric scintillation risk maps and their contribution to position dilution of precision on the ground

Authors: Alexandra Koulouri, Nathan D. Smith, Bruno C. Vani, Ville Rimpilainen, Ivan Astin, Biagio Forte

Abstract: Satellite-based communications, navigation systems and many scientific instruments rely on observations of trans-ionospheric signals. The quality of these signals can be deteriorated by ionospheric scintillation which can have detrimental effects on the mentioned applications. Therefore, monitoring of ionospheric scintillation and quantifying its effect on the ground are of significant interest. I… ▽ More Satellite-based communications, navigation systems and many scientific instruments rely on observations of trans-ionospheric signals. The quality of these signals can be deteriorated by ionospheric scintillation which can have detrimental effects on the mentioned applications. Therefore, monitoring of ionospheric scintillation and quantifying its effect on the ground are of significant interest. In this work, we develop a methodology which estimates the scintillation induced ionospheric uncertainties in the sky and translates their impact to the end-users on the ground. First, by using the risk concept from decision theory and by exploiting the intensity and duration of scintillation events (as measured by the S4 index), we estimate ionospheric risk maps that could readily give an initial impression on the effects of scintillation on the satellite-receiver communication. However, to better understand the influence of scintillation on the positioning accuracy on the ground, we formulate a new weighted dilution of precision (WPDOP) measure that incorporates the ionospheric scintillation risks as weighting factors for the given satellite-receiver constellations. These weights depend implicitly on scintillation intensity and duration thresholds which can be specified by the end-user based on the sensitivity of the application, for example. We demonstrate our methodology by using scintillation data from South America, and produce ionospheric risk maps which illustrate broad scintillation activity, especially at the equatorial anomaly. Moreover, we construct ground maps of WPDOP over a grid of hypothetical receivers which reveal that ionospheric scintillation can also affect such regions of the continent that are not exactly under the observed ionospheric scintillation structures. Particularly, this is evident in cases when only the Global Positioning System (GPS) is available. △ Less

Submitted 5 February, 2020; v1 submitted 19 November, 2019; originally announced November 2019.

Comments: Keywords: Ionospheric scintillation risk, dilution of precision, statistics error covariances, weights, South America, S4 index, GNSS positioning uncertainty

ARIADNE -- A Novel Optical LArTPC: Technical Design Report and Initial Characterisation using a Secondary Beam from the CERN PS and Cosmic Muons

Authors: D. Hollywood, K. Majumdar, K. Mavrokoridis, K. J. McCormick, B. Philippou, S. Powell, A. Roberts, N. A. Smith, G. Stavrakis, C. Touramanis, J. Vann

Abstract: ARIADNE is a 1-ton (330 kg fiducial mass) dual-phase liquid argon (LAr) time projection chamber (TPC) featuring a novel optical readout. Four electron-multiplying charge-coupled device (EMCCD) cameras are mounted externally, and these capture the secondary scintillation light produced in the holes of a thick electron gas multiplier (THGEM). Track reconstruction using this novel readout approach is… ▽ More ARIADNE is a 1-ton (330 kg fiducial mass) dual-phase liquid argon (LAr) time projection chamber (TPC) featuring a novel optical readout. Four electron-multiplying charge-coupled device (EMCCD) cameras are mounted externally, and these capture the secondary scintillation light produced in the holes of a thick electron gas multiplier (THGEM). Track reconstruction using this novel readout approach is demonstrated. Optical readout has the potential to be a cost effective alternative to charge readout in future LArTPCs. In this paper, the technical design of the detector is detailed. Results of mixed particle detection using a secondary beam from the CERN PS (representing the first ever optical images of argon interactions in a dual-phase LArTPC at a beamline) and cosmic muon detection at the University of Liverpool are also presented. △ Less

Submitted 3 March, 2020; v1 submitted 8 October, 2019; originally announced October 2019.

Comments: 58 pages, 40 figures. Changes from previous version based on pre-publication review: improved quality of various figures, improved clarity of some definitions and reduced longer sentences for better readability, fixed typos and formatting errors

Journal ref: JINST 15 (2020) P03003

Origin of the resistance-area product dependence of spin transfer torque switching in perpendicular magnetic random access memory cells

Authors: Goran Mihajlovic, Neil Smith, Tiffany Santos, Jui-Lung Li, Michael Tran, Matthew Carey, Bruce D. Terris, Jordan A. Katine

Abstract: We report on an experimental study of current induced switching in perpendicular magnetic random access memory (MRAM) cells with variable resistance-area products (RAs). Our results show that in addition to spin transfer torque (STT), current induced self-heating and voltage controlled magnetic anisotropy also contribute to switching and can explain the RA dependencies of switching current density… ▽ More We report on an experimental study of current induced switching in perpendicular magnetic random access memory (MRAM) cells with variable resistance-area products (RAs). Our results show that in addition to spin transfer torque (STT), current induced self-heating and voltage controlled magnetic anisotropy also contribute to switching and can explain the RA dependencies of switching current density and STT efficiency. Our findings suggest that thermal optimization of perpendicular MRAM cells can result in significant reduction of switching currents. △ Less

Submitted 7 May, 2019; originally announced May 2019.

Angular adaptivity with spherical harmonics for Boltzmann transport

Authors: S. Dargaville, A. G. Buchan, R. P. Smedley-Stevenson, P. N Smith, C. C. Pain

Abstract: This paper describes an angular adaptivity algorithm for Boltzmann transport applications which uses Pn and filtered Pn expansions, allowing for different expansion orders across space/energy. Our spatial discretisation is specifically designed to use less memory than competing DG schemes and also gives us direct access to the amount of stabilisation applied at each node. For filtered Pn expansion… ▽ More This paper describes an angular adaptivity algorithm for Boltzmann transport applications which uses Pn and filtered Pn expansions, allowing for different expansion orders across space/energy. Our spatial discretisation is specifically designed to use less memory than competing DG schemes and also gives us direct access to the amount of stabilisation applied at each node. For filtered Pn expansions, we then use our adaptive process in combination with this net amount of stabilisation to compute a spatially dependent filter strength that does not depend on a priori spatial information. This applies heavy filtering only where discontinuities are present, allowing the filtered Pn expansion to retain high-order convergence where possible. Regular and goal-based error metrics are shown and both the adapted Pn and adapted filtered Pn methods show significant reductions in DOFs and runtime. The adapted filtered Pn with our spatially dependent filter shows close to fixed iteration counts and up to high-order is even competitive with P0 discretisations in problems with heavy advection. △ Less

Submitted 11 March, 2019; originally announced March 2019.

Comments: arXiv admin note: text overlap with arXiv:1901.04929

Scalable angular adaptivity for Boltzmann transport

Authors: S. Dargaville, A. G. Buchan, R. P. Smedley-Stevenson, P. N Smith, C. C. Pain

Abstract: This paper describes an angular adaptivity algorithm for Boltzmann transport applications which for the first time shows evidence of $\mathcal{O}(n)$ scaling in both runtime and memory usage, where $n$ is the number of adapted angles. This adaptivity uses Haar wavelets, which perform structured $h$-adaptivity built on top of a hierarchical P$_0$ FEM discretisation of a 2D angular domain, allowing… ▽ More This paper describes an angular adaptivity algorithm for Boltzmann transport applications which for the first time shows evidence of $\mathcal{O}(n)$ scaling in both runtime and memory usage, where $n$ is the number of adapted angles. This adaptivity uses Haar wavelets, which perform structured $h$-adaptivity built on top of a hierarchical P$_0$ FEM discretisation of a 2D angular domain, allowing different anisotropic angular resolution to be applied across space/energy. Fixed angular refinement, along with regular and goal-based error metrics are shown in three example problems taken from neutronics/radiative transfer applications. We use a spatial discretisation designed to use less memory than competing alternatives in general applications and gives us the flexibility to use a matrix-free multgrid method as our iterative method. This relies on scalable matrix-vector products using Fast Wavelet Transforms and allows the use of traditional sweep algorithms if desired. △ Less

Submitted 15 January, 2019; originally announced January 2019.

Sub-Hertz Optomechanically-Induced Transparency

Authors: T. Bodiya, V. Sudhir, C. Wipf, N. Smith, A. Buikema, A. Kontos, H. Yu, N. Mavalvala

Abstract: Optical interferometers with suspended mirrors are the archetype of all current audio-frequency gravitational-wave detectors. The radiation pressure interaction between the motion of the mirror and the circulating optical field in such interferometers represents a pristine form of light-matter coupling, largely due to 30 years of effort in developing high quality optical materials with low mechani… ▽ More Optical interferometers with suspended mirrors are the archetype of all current audio-frequency gravitational-wave detectors. The radiation pressure interaction between the motion of the mirror and the circulating optical field in such interferometers represents a pristine form of light-matter coupling, largely due to 30 years of effort in developing high quality optical materials with low mechanical dissipation. However, in all current suspended interferometers, the radiation pressure interaction is too weak to be useful as a resource, and too strong to be neglected. Here, we demonstrate a meter-long interferometer with suspended mirrors, of effective mass $~ 125$ g, where the radiation pressure interaction is enhanced by strong optical pumping to realize a cooperativity of $50$. We probe this regime by observing optomechanically-induced transparency of a weak on-resonant probe. The low resonant frequency and high-Q of the mechanical oscillator allows us to demonstrate transparency windows barely $100$ mHz wide at room temperature. Together with a near-unity ($\sim 99.9\%$) out-coupling efficiency, our system saturates the theoretical delay-bandwidth product, rendering it an optical buffer capable of seconds-long storage times. △ Less

Submitted 25 December, 2018; originally announced December 2018.

Report number: LIGO-P1800358

Journal ref: Phys. Rev. A 100, 013853 (2019)

Fabrication of micro fluidic cavities using Si-to-glass anodic bonding

Authors: N. Zhelev, T. S. Abhilash, R. G. Bennett, E. N. Smith, B. Ilic, J. M. Parpia, L. V. Levitin, X. Rojas, A. Casey, J. Saunders

Abstract: We demonstrate the fabrication of $\sim$1.08 $μ$m deep microfluidic cavities with characteristic size as large as 7 mm $\times$ 11 mm or 11 mm diameter, using a silicon$-$glass anodic bonding technique that does not require posts to act as separators to define cavity height. Since the phase diagram of $^3$He is significantly altered under confinement, posts might act as pinning centers for phase b… ▽ More We demonstrate the fabrication of $\sim$1.08 $μ$m deep microfluidic cavities with characteristic size as large as 7 mm $\times$ 11 mm or 11 mm diameter, using a silicon$-$glass anodic bonding technique that does not require posts to act as separators to define cavity height. Since the phase diagram of $^3$He is significantly altered under confinement, posts might act as pinning centers for phase boundaries. The previous generation of cavities relied on full wafer-bonding which is more prone to failure and requires dicing post-bonding, whereas the these cavities are made by bonding a pre-cut piece of Hoya SD-2 glass to a patterned piece of silicon in which the cavity is defined by etching. Anodic bonding was carried out at 425 $^{\circ}$C with 200 V, and we observe that pressurizing the cavity to failure ($>$ 30 bar pressure) results in glass breaking, rather than the glass-silicon bond separation. In this article, we discuss the detailed fabrication of the cavity, its edges, and details of the junction between the coin silver fill line and the silicon base of the cavity that enables a low internal-friction joint. This feature is important for mass coupling torsional oscillator experimental assays of the superfluid inertial contribution where a high quality factor ($Q$) improves frequency resolution. The surface preparation that yields well-characterized smooth surfaces to eliminate pinning sites, the use of transparent glass as a cover permitting optical access, low temperature capability and attachment of pressure-capable ports for fluid access may be features that are important in other applications. △ Less

Submitted 12 June, 2018; v1 submitted 2 May, 2018; originally announced May 2018.

Comments: 10 figures

Comment on "Minimum Action Path Theory Reveals the Details of Stochastic Transitions Out of Oscillatory States"

Authors: Baruch Meerson, Naftali R. Smith

Abstract: De la Cruz et al. [Phys. Rev. Lett. 120, 128102 (2018); arXiv:1705.08683] studied a noise-induced transition in an oscillating stochastic population undergoing birth- and death-type reactions. They applied the Freidlin-Wentzell WKB formalism to determine the most probable path to the noise-induced escape from a limit cycle predicted by deterministic theory, and to find the probability distribution… ▽ More De la Cruz et al. [Phys. Rev. Lett. 120, 128102 (2018); arXiv:1705.08683] studied a noise-induced transition in an oscillating stochastic population undergoing birth- and death-type reactions. They applied the Freidlin-Wentzell WKB formalism to determine the most probable path to the noise-induced escape from a limit cycle predicted by deterministic theory, and to find the probability distribution of escape time. Here we raise a number of objections to their calculations. △ Less

Submitted 27 June, 2018; v1 submitted 2 April, 2018; originally announced April 2018.

Journal ref: Phys. Rev. Lett. 122, 059801 (2019)

Mapping the material in the LHCb vertex locator using secondary hadronic interactions

Authors: M. Alexander, W. Barter, A. Bay, L. J. Bel, M. van Beuzekom, G. Bogdanova, S. Borghi, T. J. V. Bowcock, E. Buchanan, J. Buytaert, K. Carvalho Akiba, S. Chen, V. Coco, P. Collins, A. Crocombe, F. Da Cunha Marinho, E. Dall'Occo, S. De Capua, C. T. Dean, F. Dettori, D. Dossett, K. Dreimanis, G. Dujany, L. Eklund, T. Evans , et al. (41 additional authors not shown)

Abstract: Precise knowledge of the location of the material in the LHCb vertex locator (VELO) is essential to reducing background in searches for long-lived exotic particles, and in identifying jets that originate from beauty and charm quarks. Secondary interactions of hadrons produced in beam-gas collisions are used to map the location of material in the VELO. Using this material map, along with properties… ▽ More Precise knowledge of the location of the material in the LHCb vertex locator (VELO) is essential to reducing background in searches for long-lived exotic particles, and in identifying jets that originate from beauty and charm quarks. Secondary interactions of hadrons produced in beam-gas collisions are used to map the location of material in the VELO. Using this material map, along with properties of a reconstructed secondary vertex and its constituent tracks, a $p$-value can be assigned to the hypothesis that the secondary vertex originates from a material interaction. A validation of this procedure is presented using photon conversions to dimuons. △ Less

Submitted 18 June, 2018; v1 submitted 20 March, 2018; originally announced March 2018.

Comments: All figures and tables are available at https://lhcbproject.web.cern.ch/lhcbproject/Publications/LHCbProjectPublic/LHCb-DP-2018-002.html

Report number: CERN-LHCb-DP-2018-002

Journal ref: JINST 13, P06008 (2018)

"You are no Jack Kennedy": On Media Selection of Highlights from Presidential Debates

Authors: Chenhao Tan, Hao Peng, Noah A. Smith

Abstract: Political speeches and debates play an important role in shaping the images of politicians, and the public often relies on media outlets to select bits of political communication from a large pool of utterances. It is an important research question to understand what factors impact this selection process. To quantitatively explore the selection process, we build a three- decade dataset of presid… ▽ More Political speeches and debates play an important role in shaping the images of politicians, and the public often relies on media outlets to select bits of political communication from a large pool of utterances. It is an important research question to understand what factors impact this selection process. To quantitatively explore the selection process, we build a three- decade dataset of presidential debate transcripts and post-debate coverage. We first examine the effect of wording and propose a binary classification framework that controls for both the speaker and the debate situation. We find that crowdworkers can only achieve an accuracy of 60% in this task, indicating that media choices are not entirely obvious. Our classifiers outperform crowdworkers on average, mainly in primary debates. We also compare important factors from crowdworkers' free-form explanations with those from data-driven methods and find interesting differences. Few crowdworkers mentioned that "context matters", whereas our data show that well-quoted sentences are more distinct from the previous utterance by the same speaker than less-quoted sentences. Finally, we examine the aggregate effect of media preferences towards different wordings to understand the extent of fragmentation among media outlets. By analyzing a bipartite graph built from quoting behavior in our data, we observe a decreasing trend in bipartisan coverage. △ Less

Submitted 23 February, 2018; originally announced February 2018.

Comments: 10 pages, 5 figures, to appear in Proceedings of WWW 2018, data and more at https://chenhaot.com/papers/debate-quotes.html

In-situ characterization of the Hamamatsu R5912-HQE photomultiplier tubes used in the DEAP-3600 experiment

Authors: DEAP Collaboration, P. -A. Amaudruz, M. Batygov, B. Beltran, C. E. Bina, D. Bishop, J. Bonatt, G. Boorman, M. G. Boulay, B. Broerman, T. Bromwich, J. F. Bueno, A. Butcher, B. Cai, S. Chan, M. Chen, R. Chouinard, S. Churchwell, B. T. Cleveland, D. Cranshaw, K. Dering, S. Dittmeier, F. A. Duncan, M. Dunford, A. Erlandson , et al. (77 additional authors not shown)

Abstract: The Hamamatsu R5912-HQE photomultiplier-tube (PMT) is a novel high-quantum efficiency PMT. It is currently used in the DEAP-3600 dark matter detector and is of significant interest for future dark matter and neutrino experiments where high signal yields are needed. We report on the methods developed for in-situ characterization and monitoring of DEAP's 255 R5912-HQE PMTs. This includes a detaile… ▽ More The Hamamatsu R5912-HQE photomultiplier-tube (PMT) is a novel high-quantum efficiency PMT. It is currently used in the DEAP-3600 dark matter detector and is of significant interest for future dark matter and neutrino experiments where high signal yields are needed. We report on the methods developed for in-situ characterization and monitoring of DEAP's 255 R5912-HQE PMTs. This includes a detailed discussion of typical measured single-photoelectron charge distributions, correlated noise (afterpulsing), dark noise, double, and late pulsing characteristics. The characterization is performed during the detector commissioning phase using laser light injected through a light diffusing sphere and during normal detector operation using LED light injected through optical fibres. △ Less

Submitted 29 January, 2019; v1 submitted 29 May, 2017; originally announced May 2017.

Journal ref: Nucl. Instrum. Methods Phys. Res. A 922, 373-384 (2019)

Friendships, Rivalries, and Trysts: Characterizing Relations between Ideas in Texts

Authors: Chenhao Tan, Dallas Card, Noah A. Smith

Abstract: Understanding how ideas relate to each other is a fundamental question in many domains, ranging from intellectual history to public communication. Because ideas are naturally embedded in texts, we propose the first framework to systematically characterize the relations between ideas based on their occurrence in a corpus of documents, independent of how these ideas are represented. Combining two st… ▽ More Understanding how ideas relate to each other is a fundamental question in many domains, ranging from intellectual history to public communication. Because ideas are naturally embedded in texts, we propose the first framework to systematically characterize the relations between ideas based on their occurrence in a corpus of documents, independent of how these ideas are represented. Combining two statistics --- cooccurrence within documents and prevalence correlation over time --- our approach reveals a number of different ways in which ideas can cooperate and compete. For instance, two ideas can closely track each other's prevalence over time, and yet rarely cooccur, almost like a "cold war" scenario. We observe that pairwise cooccurrence and prevalence correlation exhibit different distributions. We further demonstrate that our approach is able to uncover intriguing relations between ideas through in-depth case studies on news articles and research papers. △ Less

Submitted 16 July, 2017; v1 submitted 25 April, 2017; originally announced April 2017.

Comments: 11 pages, 9 figures, to appear in Proceedings of ACL 2017, code and data available at https://chenhaot.com/pages/idea-relations.html (fixed a typo)

The Conversion of CESR to Operate as the Test Accelerator, CesrTA, Part 4: Superconducting Wiggler Diagnostics

Authors: M. G. Billing, S. Greenwald, X. Liu, Y. Li, D. Sabol, E. N. Smith, C. R. Strohman, M. A. Palmer, D. V. Munson

Abstract: Cornell's electron/positron storage ring (CESR) was modified over a series of accelerator shutdowns beginning in May 2008, which substantially improves its capability for research and development for particle accelerators. CESR's energy span from 1.8 to 5.6 GeV with both electrons and positrons makes it appropriate for the study of a wide spectrum of accelerator physics issues and instrumentation… ▽ More Cornell's electron/positron storage ring (CESR) was modified over a series of accelerator shutdowns beginning in May 2008, which substantially improves its capability for research and development for particle accelerators. CESR's energy span from 1.8 to 5.6 GeV with both electrons and positrons makes it appropriate for the study of a wide spectrum of accelerator physics issues and instrumentation related to present light sources and future lepton damping rings. Additionally a number of these are also relevant for the beam physics of proton accelerators. This paper, the last in a series of four, describes the vacuum system modifications of the superconducting wigglers to accommodate the diagnostic instrumentation for the study of electron cloud (EC) behavior within wigglers. Earlier papers provided an overview of the accelerator physics program, the general modifications of CESR, the modifications of the vacuum system necessary for the conversion of CESR to the test accelerator, CesrTA, enhanced to study such subjects as low emittance tuning methods, EC effects, intra-beam scattering, fast ion instabilities as well as general improvements to beam instrumentation. While the initial studies of CesrTA focussed on questions related to the International Linear Collider damping ring design, CESR is a very versatile storage ring, capable of studying a wide range of accelerator physics and instrumentation questions. △ Less

Submitted 18 October, 2016; v1 submitted 23 August, 2016; originally announced August 2016.

Solar Neutrino Measurements in Super-Kamiokande-IV

Authors: Super-Kamiokande Collaboration, :, K. Abe, Y. Haga, Y. Hayato, M. Ikeda, K. Iyogi, J. Kameda, Y. Kishimoto, Ll. Marti, M. Miura, S. Moriyama, M. Nakahata, T. Nakajima, S. Nakayama, A. Orii, H. Sekiya, M. Shiozawa, Y. Sonoda, A. Takeda, H. Tanaka, Y. Takenaga, S. Tasaka, T. Tomura, K. Ueno , et al. (146 additional authors not shown)

Abstract: Upgraded electronics, improved water system dynamics, better calibration and analysis techniques allowed Super-Kamiokande-IV to clearly observe very low-energy 8B solar neutrino interactions, with recoil electron kinetic energies as low as 3.49 MeV. Super-Kamiokande-IV data-taking began in September of 2008; this paper includes data until February 2014, a total livetime of 1664 days. The measured… ▽ More Upgraded electronics, improved water system dynamics, better calibration and analysis techniques allowed Super-Kamiokande-IV to clearly observe very low-energy 8B solar neutrino interactions, with recoil electron kinetic energies as low as 3.49 MeV. Super-Kamiokande-IV data-taking began in September of 2008; this paper includes data until February 2014, a total livetime of 1664 days. The measured solar neutrino flux is (2.308+-0.020(stat.) + 0.039-0.040(syst.)) x 106/(cm2sec) assuming no oscillations. The observed recoil electron energy spectrum is consistent with no distortions due to neutrino oscillations. An extended maximum likelihood fit to the amplitude of the expected solar zenith angle variation of the neutrino-electron elastic scattering rate in SK-IV results in a day/night asymmetry of (-3.6+-1.6(stat.)+-0.6(syst.))%. The SK-IV solar neutrino data determine the solar mixing angle as sin2 theta_12 = 0.327+0.026-0.031, all SK solar data (SK-I, SK-II, SK III and SKIV) measures this angle to be sin2 theta_12 = 0.334+0.027-0.023, the determined mass-squared splitting is Delta m2_21 = 4.8+1.5-0.8 x10-5 eV2. △ Less

Submitted 23 June, 2016; originally announced June 2016.

Comments: Submitted to Physical Review D; 23 pages, 40 figures

Calibration of the Advanced LIGO detectors for the discovery of the binary black-hole merger GW150914

Authors: The LIGO Scientific Collaboration, B. P. Abbott, R. Abbott, T. D. Abbott, M. R. Abernathy, K. Ackley, C. Adams, P. Addesso, R. X. Adhikari, V. B. Adya, C. Affeldt, N. Aggarwal, O. D. Aguiar, A. Ain, P. Ajith, B. Allen, P. A. Altin, D. V. Amariutei, S. B. Anderson, W. G. Anderson, K. Arai, M. C. Araya, C. C. Arceneaux, J. S. Areeda, K. G. Arun , et al. (702 additional authors not shown)

Abstract: In Advanced LIGO, detection and astrophysical source parameter estimation of the binary black hole merger GW150914 requires a calibrated estimate of the gravitational-wave strain sensed by the detectors. Producing an estimate from each detector's differential arm length control loop readout signals requires applying time domain filters, which are designed from a frequency domain model of the detec… ▽ More In Advanced LIGO, detection and astrophysical source parameter estimation of the binary black hole merger GW150914 requires a calibrated estimate of the gravitational-wave strain sensed by the detectors. Producing an estimate from each detector's differential arm length control loop readout signals requires applying time domain filters, which are designed from a frequency domain model of the detector's gravitational-wave response. The gravitational-wave response model is determined by the detector's opto-mechanical response and the properties of its feedback control system. The measurements used to validate the model and characterize its uncertainty are derived primarily from a dedicated photon radiation pressure actuator, with cross-checks provided by optical and radio frequency references. We describe how the gravitational-wave readout signal is calibrated into equivalent gravitational-wave-induced strain and how the statistical uncertainties and systematic errors are assessed. Detector data collected over 38 calendar days, from September 12 to October 20, 2015, contain the event GW150914 and approximately 16 of coincident data used to estimate the event false alarm probability. The calibration uncertainty is less than 10% in magnitude and 10 degrees in phase across the relevant frequency band 20 Hz to 1 kHz. △ Less

Submitted 28 February, 2017; v1 submitted 11 February, 2016; originally announced February 2016.

Comments: 15 pages, 10 figures

Journal ref: Phys. Rev. D 95, 062003 (2017)

Run 2 Upgrades to the CMS Level-1 Calorimeter Trigger

Authors: B. Kreis, J. Berryhill, R. Cavanaugh, K. Mishra, R. Rivera, L. Uplegger, L. Apanasevich, J. Zhang, J. Marrouche, N. Wardle, R. Aggleton, F. Ball, J. Brooke, D. Newbold, S. Paramesvaran, D. Smith, M. Baber, A. Bundock, M. Citron, A. Elwood, G. Hall, G. Iles, C. Laner, B. Penning, A. Rose , et al. (39 additional authors not shown)

Abstract: The CMS Level-1 calorimeter trigger is being upgraded in two stages to maintain performance as the LHC increases pile-up and instantaneous luminosity in its second run. In the first stage, improved algorithms including event-by-event pile-up corrections are used. New algorithms for heavy ion running have also been developed. In the second stage, higher granularity inputs and a time-multiplexed app… ▽ More The CMS Level-1 calorimeter trigger is being upgraded in two stages to maintain performance as the LHC increases pile-up and instantaneous luminosity in its second run. In the first stage, improved algorithms including event-by-event pile-up corrections are used. New algorithms for heavy ion running have also been developed. In the second stage, higher granularity inputs and a time-multiplexed approach allow for improved position and energy resolution. Data processing in both stages of the upgrade is performed with new, Xilinx Virtex-7 based AMC cards. △ Less

Submitted 18 November, 2015; originally announced November 2015.

Comments: 10 pages, 7 figures

Measurements of the atmospheric neutrino flux by Super-Kamiokande: energy spectra, geomagnetic effects, and solar modulation

Authors: E. Richard, K. Okumura, K. Abe, Y. Haga, Y. Hayato, M. Ikeda, K. Iyogi, J. Kameda, Y. Kishimoto, M. Miura, S. Moriyama, M. Nakahata, T. Nakajima, Y. Nakano, S. Nakayama, A. Orii, H. Sekiya, M. Shiozawa, A. Takeda, H. Tanaka, T. Tomura, R. A. Wendell, R. Akutsu, T. Irvine, T. Kajita , et al. (104 additional authors not shown)

Abstract: A comprehensive study on the atmospheric neutrino flux in the energy region from sub-GeV up to several TeV using the Super-Kamiokande water Cherenkov detector is presented in this paper. The energy and azimuthal spectra of the atmospheric $ν_e+{\barν}_e$ and $ν_μ+{\barν}_μ$ fluxes are measured. The energy spectra are obtained using an iterative unfolding method by combining various event topologie… ▽ More A comprehensive study on the atmospheric neutrino flux in the energy region from sub-GeV up to several TeV using the Super-Kamiokande water Cherenkov detector is presented in this paper. The energy and azimuthal spectra of the atmospheric $ν_e+{\barν}_e$ and $ν_μ+{\barν}_μ$ fluxes are measured. The energy spectra are obtained using an iterative unfolding method by combining various event topologies with differing energy responses. The azimuthal spectra depending on energy and zenith angle, and their modulation by geomagnetic effects, are also studied. A predicted east-west asymmetry is observed in both the $ν_e$ and $ν_μ$ samples at 8.0 σ and 6.0 σ significance, respectively, and an indication that the asymmetry dipole angle changes depending on the zenith angle was seen at the 2.2 σ level. The measured energy and azimuthal spectra are consistent with the current flux models within the estimated systematic uncertainties. A study of the long-term correlation between the atmospheric neutrino flux and the solar magnetic activity cycle is also performed, and a weak indication of a correlation was seen at the 1.1 σ level, using SK I-IV data spanning a 20 year period. For particularly strong solar activity periods known as Forbush decreases, no theoretical prediction is available, but a deviation below the typical neutrino event rate is seen at the 2.4 σ level. △ Less

Submitted 6 September, 2016; v1 submitted 27 October, 2015; originally announced October 2015.

Comments: 30 pages, 31 figures

Journal ref: Phys. Rev. D 94, 052001 (2016)

First Demonstration of Imaging Cosmic Muons in a Two-Phase Liquid Argon TPC using an EMCCD Camera and a THGEM

Authors: K. Mavrokoridis, J. Carroll, K. J. McCormick, P. Paudyal, A. Roberts, N. A. Smith, C. Touramanis

Abstract: Colossal two-phase Liquid Argon Time Projection Chambers (LAr TPCs) are a proposed option for future long-baseline neutrino experiments. This study illustrates the feasibility of using an EMCCD camera to capture light induced by single cosmic events in a two-phase LAr TPC employing a THGEM. An Andor iXon Ultra 897 EMCCD camera was externally mounted via a borosilicate glass viewport on the Liverpo… ▽ More Colossal two-phase Liquid Argon Time Projection Chambers (LAr TPCs) are a proposed option for future long-baseline neutrino experiments. This study illustrates the feasibility of using an EMCCD camera to capture light induced by single cosmic events in a two-phase LAr TPC employing a THGEM. An Andor iXon Ultra 897 EMCCD camera was externally mounted via a borosilicate glass viewport on the Liverpool two-phase LAr TPC. The camera successfully captured the secondary scintillation light produced at the THGEM holes that had been induced by cosmic events. The light collection capability of the camera for various EMCCD gains was assessed. For a THGEM gain of 64 and an EMCCD gain of 1000, clear images were captured with an average signal-to-noise ratio of 6. Preliminary 3D reconstruction of straight cosmic muon tracks has been performed by combining the camera images, PMT signals and THGEM charge data. Reconstructed cosmic muon tracks were used to determine THGEM gain and to calibrate the intensity levels of the EMCCD image. △ Less

Submitted 23 July, 2015; originally announced July 2015.

Approximate analytical solutions to the condensation-coagulation equation of aerosols

Authors: Naftali R. Smith, Nir J. Shaviv, Henrik Svensmark

Abstract: We present analytical solutions to the steady state injection-condensation-coagulation equation of aerosols in the atmosphere. These solutions are appropriate under different limits but more general than previously derived analytical solutions. For example, we provide an analytic solution to the coagulation limit plus a condensation correction. Our solutions are then compared with numerical result… ▽ More We present analytical solutions to the steady state injection-condensation-coagulation equation of aerosols in the atmosphere. These solutions are appropriate under different limits but more general than previously derived analytical solutions. For example, we provide an analytic solution to the coagulation limit plus a condensation correction. Our solutions are then compared with numerical results. We show that the solutions can be used to estimate the sensitivity of the cloud condensation nuclei number density to the nucleation rate of small condensation nuclei and to changes in the formation rate of sulfuric acid. △ Less

Submitted 1 July, 2020; v1 submitted 23 February, 2015; originally announced February 2015.

Comments: 16 pages, 6 figures

Journal ref: Aerosol Science and Technology 50, 578 (2016)