Showing 1–50 of 322 results for author: Smith, A

Highly squeezed nanophotonic quantum microcombs with broadband frequency tunability

Authors: Yichen Shen, Ping-Yen Hsieh, Dhruv Srinivasan, Antoine Henry, Gregory Moille, Sashank Kaushik Sridhar, Alessandro Restelli, You-Chia Chang, Kartik Srinivasan, Thomas A. Smith, Avik Dutt

Abstract: Squeezed light offers genuine quantum advantage in enhanced sensing and quantum computation; yet the level of squeezing or quantum noise reduction generated from nanophotonic chips has been limited. In addition to strong quantum noise reduction, key desiderata for such a nanophotonic squeezer include frequency agility or tunability over a broad frequency range, and simultaneous operation in many d… ▽ More Squeezed light offers genuine quantum advantage in enhanced sensing and quantum computation; yet the level of squeezing or quantum noise reduction generated from nanophotonic chips has been limited. In addition to strong quantum noise reduction, key desiderata for such a nanophotonic squeezer include frequency agility or tunability over a broad frequency range, and simultaneous operation in many distinct, well-defined quantum modes (qumodes). Here we present a strongly overcoupled silicon nitride squeezer based on a below-threshold optical parametric amplifier (OPA) that produces directly detected squeezing of 5.6 dB $\pm$ 0.2 dB, surpassing previous demonstrations in both continuous-wave and pulsed regimes. We introduce a seed-assisted detection technique into such nanophotonic squeezers that reveals a quantum frequency comb (QFC) of 16 qumodes, with a separation of 11~THz between the furthest qumode pair, while maintaining a strong squeezing. Additionally, we report spectral tuning of a qumode comb pair over one free-spectral range of the OPA, thus bridging the spacing between the discrete modes of the QFC. Our results significantly advance both the generation and detection of nanophotonic squeezed light in a broadband and multimode platform, establishing a scalable, chip-integrated path for compact quantum sensors and continuous-variable quantum information processing systems. △ Less

Submitted 6 May, 2025; originally announced May 2025.

Microring resonator-based photonic circuit for faithfully heralding NOON states

Authors: Ryan Scott, Peter L. Kaulfuss, A. Matthew Smith, Paul M. Alsing, Wren Sanders, Gregory A. Howland, Edwin E. Hach III

Abstract: We have designed a Micro-Ring Resonator (MRR) based device that allows for the post-selection of high order NOON states via heralding. NOON states higher than $N=2$ cannot be generated deterministically. By tuning the coupling parameters of the device we can minimize the amplitudes of the 'accidental' states to maximize the probability of obtaining the NOON state upon a successful heralding event.… ▽ More We have designed a Micro-Ring Resonator (MRR) based device that allows for the post-selection of high order NOON states via heralding. NOON states higher than $N=2$ cannot be generated deterministically. By tuning the coupling parameters of the device we can minimize the amplitudes of the 'accidental' states to maximize the probability of obtaining the NOON state upon a successful heralding event. Our device can produce a 3-photon NOON state output with 100% certainty upon a successful heralding detection, which occurs with probability $\frac{8}{27}$ for optimal tunable device parameters. A successful heralding event allows for non-destructive time of flight tracking of the NOON state thus establishing a significantly enhanced level of engineering control for integration of the NOON state into scalable systems for quantum sensing and metrology. We further discuss extensions of our technique to even higher NOON states having $N=4,5$. △ Less

Submitted 31 March, 2025; originally announced April 2025.

Comments: 6 pages, 2 figures

Measurement of Trace Elements in Volcanic Materials: Consequences for the Cretaceous-Tertiary Mass Extinction, Geoneutrinos and the Origin of the Hawaii's Archipelago

Authors: Pedro V. Guillaumon, Iuda D. Goldman, Eric B. Norman, Keenan J. Thomas, Paulo R. Pascholati, Ross E. Meyer, Jordan L. Sabella, Alan R. Smith

Abstract: Seventeen representative samples of volcanic origin were collected from Ecuador (Pichincha Volcano), Iceland (Eyjafjallajökull Volcano), India (Deccan Traps), Hawaii, Kilimanjaro, Mt. Etna, Rwanda (Virunga Mountains), and Uganda (Virunga Mountains). Neutron activation analysis (NAA) was performed to determine the concentration of 33 chemical elements, including 21 trace elements, 20 heavy metals,… ▽ More Seventeen representative samples of volcanic origin were collected from Ecuador (Pichincha Volcano), Iceland (Eyjafjallajökull Volcano), India (Deccan Traps), Hawaii, Kilimanjaro, Mt. Etna, Rwanda (Virunga Mountains), and Uganda (Virunga Mountains). Neutron activation analysis (NAA) was performed to determine the concentration of 33 chemical elements, including 21 trace elements, 20 heavy metals, and 9 rare earth elements: Al, As, Ba, Ca, Ce, Cl, Co, Cr, Cs, Dy, Eu, Fe, Hf, K, La, Lu, Mg, Mn, Na, Nd, Rb, Sb, Sc, Sm, Sr, Ta, Tb, Th, Ti, U, Yb, Zn, and Zr. Correlation analysis of the abundance of samples from different islands in the Hawaii archipelago (Kauai, Kilauea, Mauna Loa, and Haleakala) confirmed that the islands were likely formed by two different lava sources. Additionally, the upper limit of iridium was determined in 11 of these samples using Bayesian analysis, which does not support the hypothesis that volcanic activity caused the extinction of the dinosaurs. We also discuss how the abundance of thorium and uranium in lava from different geological formations and depths can contribute to building a better map of natural radioisotope occurrences on Earth, which is important for geoneutrino experiments. A high abundance of rare elements was reported in some of the analyzed locations, indicating potential commercial interest and the possibility of exploring volcanoes as sources of chemical elements used in electronic devices. △ Less

Submitted 11 March, 2025; originally announced March 2025.

Ultra-Efficient Thermally Undercut Silicon Photonic Devices in a 300 mm CMOS Foundry Process

Authors: Robert Parsons, Kaylx Jang, Yuyang Wang, Asher Novick, A. Matthew Smith, Christopher C. Tison, Yonas Gebregiorgis, Venkatesh Deenadayalan, Matthew van Niekerk, Lewis Carpenter, Tat Ngai, Gerald Leake, Daniel Coleman, Xiang Meng, Stefan Preble, Michael L. Fanto, Keren Bergman, Anthony Rizzo

Abstract: Silicon photonic devices fundamental to high-density wavelength-division multiplexed (DWDM) optical links and photonic switching networks, such as resonant modulators and Mach-Zehnder interferometers (MZIs), are highly sensitive to fabrication variations and operational temperature swings. However, thermal tuning to compensate for fabrication and operational temperature variations can result in pr… ▽ More Silicon photonic devices fundamental to high-density wavelength-division multiplexed (DWDM) optical links and photonic switching networks, such as resonant modulators and Mach-Zehnder interferometers (MZIs), are highly sensitive to fabrication variations and operational temperature swings. However, thermal tuning to compensate for fabrication and operational temperature variations can result in prohibitive power consumption, challenging the scalability of energy-efficient photonic integrated circuits (PICs). In this work, we develop and demonstrate a wafer-scale thermal undercut in a 300 mm complementary metal oxide semiconductor (CMOS) foundry that dramatically improves the thermal isolation of thermo-optic devices by selectively removing substrate material beneath the waveguides and resonators. This approach significantly reduces the power required for thermal tuning across multiple device architectures, achieving almost a 5$\times$ improvement in tuning efficiency in a state-of-the-art 4.5 $μ$m radius microdisk modulator and a 40$\times$ improvement in efficiency for a MZI phase shifter. Additionally, to the best of the authors' knowledge, we demonstrate the first wafer-scale analysis of the impact of undercut trench geometry on device performance using comprehensive wafer-scale measurements across 64 reticles of a 300 mm silicon-on-insulator (SOI) wafer. These results highlight the effectiveness of this wafer-scale thermal undercut technique in minimizing energy consumption, paving the way for scalable, ultra low-power silicon photonic systems. △ Less

Submitted 11 March, 2025; originally announced March 2025.

Comments: 11 pages, 6 figures

Topological descriptors for the electron density of inorganic solids

Authors: Nathan J. Szymanski, Alexander Smith, Prodromos Daoutidis, Christopher J. Bartel

Abstract: Descriptors play an important role in data-driven approaches for materials design. While most descriptors of inorganic crystalline materials emphasize structure and composition, they often neglect the electron density - a complex yet fundamental quantity that governs material properties. In this work, we introduce Betti curves as topological descriptors that compress the electron density into comp… ▽ More Descriptors play an important role in data-driven approaches for materials design. While most descriptors of inorganic crystalline materials emphasize structure and composition, they often neglect the electron density - a complex yet fundamental quantity that governs material properties. In this work, we introduce Betti curves as topological descriptors that compress the electron density into compact representations. Derived from persistent homology, Betti curves capture bonding characteristics by encoding components, cycles, and voids across varied electron density thresholds. Machine learning models trained on Betti curves outperform those trained on raw electron densities by an average of 33 percentage points in classifying structure prototypes, predicting thermodynamic stability, and distinguishing metals from non-metals. Shannon entropy calculations reveal that Betti curves retain comparable information content to electron density while requiring two orders of magnitude less data. By combining expressive power with compact representation, Betti curves highlight the potential of topological data analysis to advance the modeling and design of inorganic materials. △ Less

Submitted 22 February, 2025; originally announced February 2025.

Frequency auto-homogenization using group-velocity-matched downconversion

Authors: Dylan Heberle, Christopher C. Tison, James Schneeloch, A. Matthew Smith, Paul M. Alsing, Jeffrey Moses, Michael L. Fanto

Abstract: With the stability of integrated photonics at network nodes and the advantages of photons as flying qubits, photonic quantum information processing (PQIP) makes quantum networks increasingly scalable. However, scaling up PQIP requires the preparation of many identical single photons which is limited by the spectral distinguishability of integrated single-photon sources due to variations in fabrica… ▽ More With the stability of integrated photonics at network nodes and the advantages of photons as flying qubits, photonic quantum information processing (PQIP) makes quantum networks increasingly scalable. However, scaling up PQIP requires the preparation of many identical single photons which is limited by the spectral distinguishability of integrated single-photon sources due to variations in fabrication or local environment. To address this, we introduce frequency auto-homogenization via group-velocity-matched downconversion to remove spectral distinguishability in varying quantum emitters. We present our theory using $χ^{(2)}$ quantum frequency conversion and show proof-of-principle data in a free-space optical setup. △ Less

Submitted 4 February, 2025; originally announced February 2025.

Comments: 24 pages, 7 figures

Assimilating Observed Surface Pressure into ML Weather Prediction Models

Authors: Laura C. Slivinski, Jeffrey S. Whitaker, Sergey Frolov, Timothy A. Smith, Niraj Agarwal

Abstract: There has been a recent surge in development of accurate machine learning (ML) weather prediction models, but evaluation of these models has mainly been focused on medium-range forecasts, not their performance in cycling data assimilation (DA) systems. Cycling DA provides a statistically optimal estimate of model initial conditions, given observations and previous model forecasts. Here, real surfa… ▽ More There has been a recent surge in development of accurate machine learning (ML) weather prediction models, but evaluation of these models has mainly been focused on medium-range forecasts, not their performance in cycling data assimilation (DA) systems. Cycling DA provides a statistically optimal estimate of model initial conditions, given observations and previous model forecasts. Here, real surface pressure observations are assimilated into several popular ML models using an ensemble Kalman filter, where accurate ensemble covariance estimation is essential to constrain unobserved state variables from sparse observations. In this cycling DA system, deterministic ML models accumulate small-scale noise until they diverge. Mitigating this noise with a spectral filter can stabilize the system, but with larger errors than traditional models. Perturbation experiments illustrate that these models do not accurately represent short-term error growth, leading to poor estimation of cross-variable covariances. △ Less

Submitted 23 December, 2024; originally announced December 2024.

Verification of single-photon path entanglement using a nitrogen vacancy center

Authors: A. I. Smith, C. M. Steenkamp, M. S. Tame

Abstract: Path entanglement is an essential resource for photonic quantum information processing, including in quantum computing, quantum communication and quantum sensing. In this work, we experimentally study the generation and verification of bipartite path-entangled states using single photons produced by a nitrogen-vacancy center within a nanodiamond. We perform a range of measurements to characterize… ▽ More Path entanglement is an essential resource for photonic quantum information processing, including in quantum computing, quantum communication and quantum sensing. In this work, we experimentally study the generation and verification of bipartite path-entangled states using single photons produced by a nitrogen-vacancy center within a nanodiamond. We perform a range of measurements to characterize the photons being generated and verify the presence of path entanglement. The experiment is performed using continuous-wave laser excitation and a novel state generation 'time-window' method. This approach to path entanglement verification is different to previous work as it does not make use of a pulsed laser excitation source. △ Less

Submitted 12 December, 2024; originally announced December 2024.

Comments: 12 pages, 9 figures, appendix

Journal ref: Appl. Opt. 64, C41-C52 (2024)

Relativistic Electron Acceleration and the 'Ankle' Spectral Feature in Earth's Magnetotail Reconnection

Authors: Weijie Sun, Mitsuo Oka, Marit Øieroset, Drew L. Turner, Tai Phan, Ian J. Cohen, Xiaocan Li, Jia Huang, Andy Smith, James A. Slavin, Gangkai Poh, Kevin J. Genestreti, Dan Gershman, Kyunghwan. Dokgo, Guan Le, Rumi Nakamura, James L. Burch

Abstract: Electrons are accelerated to high, non-thermal energies during explosive energy-release events in space, such as magnetic reconnection. However, the properties and acceleration mechanisms of relativistic electrons directly associated with reconnection X-line are not well understood. This study utilizes Magnetospheric Multiscale (MMS) measurements to analyze the flux and spectral features of sub-re… ▽ More Electrons are accelerated to high, non-thermal energies during explosive energy-release events in space, such as magnetic reconnection. However, the properties and acceleration mechanisms of relativistic electrons directly associated with reconnection X-line are not well understood. This study utilizes Magnetospheric Multiscale (MMS) measurements to analyze the flux and spectral features of sub-relativistic to relativistic (~ 80 to 560 keV) electrons during a magnetic reconnection event in Earth's magnetotail. This event provided a unique opportunity to measure the electrons directly energized by X-line as MMS stayed in the separatrix layer, where the magnetic field directly connects to the X-line, for approximately half of the observation period. Our analysis revealed that the fluxes of relativistic electrons were clearly enhanced within the separatrix layer, and the highest flux was directed away from the X-line, which suggested that these electrons originated directly from the X-line. Spectral analysis showed that these relativistic electrons deviated from the main plasma sheet population and exhibited an "ankle" feature similar to that observed in galactic cosmic rays. The contribution of "ankle" electrons to the total electron energy density increased from 0.1% to 1% in the separatrix layer, though the spectral slopes did not exhibit clear variations. Further analysis indicated that while these relativistic electrons originated from the X-line, they experienced a non-negligible degree of scattering during transport. These findings provide clear evidence that magnetic reconnection in Earth's magnetotail can efficiently energize relativistic electrons directly at the X-line, providing new insights into the complex processes governing electron dynamics during magnetic reconnection. △ Less

Submitted 8 December, 2024; originally announced December 2024.

Comments: 23 pages, 5 figures

Towards a new generation of solid total-energy detectors for neutron-capture time-of-flight experiments with intense neutron beams

Authors: J. Balibrea-Correa, V. Babiano-Suarez, J. Lerendegui-Marco, C. Domingo-Pardo, I. Ladarescu, A. Tarifeño-Saldivia, G. de la Fuente-Rosales, B. Gameiro, N. Zaitseva, V. Alcayne, D. Cano-Ott, E. González-Romero, T. Martínez, E. Mendoza, A. Pérez de Rada, J. Plaza del Olmo, A. Sánchez-Caballero, A. Casanovas, F. Calviño, S. Valenta, O. Aberle, S. Altieri, S. Amaducci, J. Andrzejewski, M. Bacak , et al. (112 additional authors not shown)

Abstract: Challenging neutron-capture cross-section measurements of small cross sections and samples with a very limited number of atoms require high-flux time-of-flight facilities. In turn, such facilities need innovative detection setups that are fast, have low sensitivity to neutrons, can quickly recover from the so-called $γ$-flash, and offer the highest possible detection sensitivity. In this paper, we… ▽ More Challenging neutron-capture cross-section measurements of small cross sections and samples with a very limited number of atoms require high-flux time-of-flight facilities. In turn, such facilities need innovative detection setups that are fast, have low sensitivity to neutrons, can quickly recover from the so-called $γ$-flash, and offer the highest possible detection sensitivity. In this paper, we present several steps toward such advanced systems. Specifically, we describe the performance of a high-sensitivity experimental setup at CERN n\_TOF EAR2. It consists of nine sTED detector modules in a compact cylindrical configuration, two conventional used large-volume C$_{6}$D$_{6}$ detectors, and one LaCl$_{3}$(Ce) detector. The performance of these detection systems is compared using $^{93}$Nb($n$,$γ$) data. We also developed a detailed \textsc{Geant4} Monte Carlo model of the experimental EAR2 setup, which allows for a better understanding of the detector features, including their efficiency determination. This Monte Carlo model has been used for further optimization, thus leading to a new conceptual design of a $γ$ detector array, STAR, based on a deuterated-stilbene crystal array. Finally, the suitability of deuterated-stilbene crystals for the future STAR array is investigaged experimentally utilizing a small stilbene-d12 prototype. The results suggest a similar or superior performance of STAR with respect to other setups based on liquid-scintillators, and allow for additional features such as neutron-gamma discrimination and a higher level of customization capability. △ Less

Submitted 28 November, 2024; originally announced November 2024.

Diamine Surface Passivation and Post-Annealing Enhance Performance of Silicon-Perovskite Tandem Solar Cells

Authors: Margherita Taddei, Hannah Contreras, Hai-Nam Doan, Declan P. McCarthy, Seongrok Seo, Robert J. E. Westbrook, Daniel J. Graham, Kunal Datta, Perrine Carroy, Delfina Muñoz, Juan-Pablo Correa-Baena, Stephen Barlow, Seth R. Marder, Joel A. Smith, Henry J. Snaith, David S. Ginger

Abstract: We show that the use of 1,3-diaminopropane (DAP) as a chemical modifier at the perovskite/electron-transport layer (ETL) interface enhances the power conversion efficiency (PCE) of 1.7 eV bandgap FACs mixed-halide perovskite single-junction cells, primarily by boosting the open-circuit voltage (VOC) from 1.06 V to 1.15 V. Adding a post-processing annealing step after C60 evaporation, further impro… ▽ More We show that the use of 1,3-diaminopropane (DAP) as a chemical modifier at the perovskite/electron-transport layer (ETL) interface enhances the power conversion efficiency (PCE) of 1.7 eV bandgap FACs mixed-halide perovskite single-junction cells, primarily by boosting the open-circuit voltage (VOC) from 1.06 V to 1.15 V. Adding a post-processing annealing step after C60 evaporation, further improves the fill factor (FF) by 20% from the control to the DAP + post-annealing devices. Using hyperspectral photoluminescence microscopy, we demonstrate that annealing helps improve compositional homogeneity at the top and bottom interfaces of the solar cell, which prevents detrimental bandgap pinning in the devices and improves C60 adhesion. Using time-of-flight secondary ion mass spectrometry, we show that DAP reacts with formamidinium present near the surface of the perovskite lattice to form a larger molecular cation, 1,4,5,6-tetrahydropyrimidinium (THP) that remains at the interface. Combining the use of DAP and the annealing of C60 interface, we fabricate Si-perovskite tandems with PCE of 25.29%, compared to 23.26% for control devices. Our study underscores the critical role of chemical reactivity and thermal post-processing of the C60/Lewis-base passivator interface in minimizing device losses and advancing solar-cell performance of wide-bandgap mixed-cation mixed-halide perovskite for tandem application. △ Less

Submitted 4 December, 2024; v1 submitted 27 November, 2024; originally announced November 2024.

In-situ observations of resident space objects with the CHEOPS space telescope

Authors: Nicolas Billot, Stephan Hellmich, Willy Benz, Andrea Fortier, David Ehrenreich, Christopher Broeg, Alexis Heitzmann, Anja Bekkelien, Alexis Brandeker, Yann Alibert, Roi Alonso, Tamas Bárczy, David Barrado Navascues, Susana C. C. Barros, Wolfgang Baumjohann, Federico Biondi, Luca Borsato, Andrew Collier Cameron, Carlos Corral van Damme, Alexandre C. M. Correia, Szilard Csizmadia, Patricio E. Cubillos, Melvyn B. Davies, Magali Deleuil, Adrien Deline , et al. (58 additional authors not shown)

Abstract: The CHaracterising ExOPlanet Satellite (CHEOPS) is a partnership between the European Space Agency and Switzerland with important contributions by 10 additional ESA member States. It is the first S-class mission in the ESA Science Programme. CHEOPS has been flying on a Sun-synchronous low Earth orbit since December 2019, collecting millions of short-exposure images in the visible domain to study e… ▽ More The CHaracterising ExOPlanet Satellite (CHEOPS) is a partnership between the European Space Agency and Switzerland with important contributions by 10 additional ESA member States. It is the first S-class mission in the ESA Science Programme. CHEOPS has been flying on a Sun-synchronous low Earth orbit since December 2019, collecting millions of short-exposure images in the visible domain to study exoplanet properties. A small yet increasing fraction of CHEOPS images show linear trails caused by resident space objects crossing the instrument field of view. To characterize the population of satellites and orbital debris observed by CHEOPS, all and every science images acquired over the past 3 years have been scanned with a Hough transform algorithm to identify the characteristic linear features that these objects cause on the images. Thousands of trails have been detected. This statistically significant sample shows interesting trends and features such as an increased occurrence rate over the past years as well as the fingerprint of the Starlink constellation. The cross-matching of individual trails with catalogued objects is underway as we aim to measure their distance at the time of observation and deduce the apparent magnitude of the detected objects. As space agencies and private companies are developing new space-based surveillance and tracking activities to catalogue and characterize the distribution of small debris, the CHEOPS experience is timely and relevant. With the first CHEOPS mission extension currently running until the end of 2026, and a possible second extension until the end of 2029, the longer time coverage will make our dataset even more valuable to the community, especially for characterizing objects with recurrent crossings. △ Less

Submitted 27 November, 2024; originally announced November 2024.

Comments: 9 pages, 8 figures, Special Issue of the Journal of Space Safety Engineering

Journal ref: Journal of Space Safety Engineering, Volume 11, Issue 3, September 2024, Pages 498-506

Strong nanophotonic quantum squeezing exceeding 3.5 dB in a foundry-compatible Kerr microresonator

Authors: Yichen Shen, Ping-Yen Hsieh, Sashank Kaushik Sridhar, Samantha Feldman, You-Chia Chang, Thomas A. Smith, Avik Dutt

Abstract: Squeezed light, with its quantum noise reduction capabilities, has emerged as a powerful resource in quantum information processing and precision metrology. To reach noise reduction levels such that a quantum advantage is achieved, off-chip squeezers are typically used. The development of on-chip squeezed light sources, particularly in nanophotonic platforms, has been challenging. We report 3.7… ▽ More Squeezed light, with its quantum noise reduction capabilities, has emerged as a powerful resource in quantum information processing and precision metrology. To reach noise reduction levels such that a quantum advantage is achieved, off-chip squeezers are typically used. The development of on-chip squeezed light sources, particularly in nanophotonic platforms, has been challenging. We report 3.7 $\pm$ 0.2 dB of directly detected nanophotonic quantum squeezing using foundry-fabricated silicon nitride (Si$_3$N$_4$) microrings with an inferred squeezing level of 10.7 dB on-chip. The squeezing level is robust across multiple devices and pump detunings, and is consistent with the overcoupling degree without noticeable degradation from excess classical noise. We also offer insights to mitigate thermally-induced excess noise, that typically degrades squeezing, by using small-radius rings with a larger free spectral range (450 GHz) and consequently lower parametric oscillation thresholds. Our results demonstrate that Si$_3$N$_4$ is a viable platform for strong quantum noise reduction in a CMOS-compatible, scalable architecture. △ Less

Submitted 18 November, 2024; originally announced November 2024.

Journal ref: Optica 12 (3), pp. 302-308 (2025)

Generating a highly uniform magnetic field inside the magnetically shielded room of the n2EDM experiment

Authors: C. Abel, N. J. Ayres, G. Ban, G. Bison, K. Bodek, V. Bondar, T. Bouillaud, D. C. Bowles, G. L. Caratsch, E. Chanel, W. Chen, P. -J. Chiu, C. Crawford, B. Dechenaux, C. B. Doorenbos, S. Emmenegger, L. Ferraris-Bouchez, M. Fertl, P. Flaux, A. Fratangelo, D. Goupillière, W. C. Griffith, D. Höhl, M. Kasprzak, K. Kirch , et al. (41 additional authors not shown)

Abstract: We present a coil system designed to generate a highly uniform magnetic field for the n2EDM experiment at the Paul Scherrer Institute. It consists of a main $B_0$ coil and a set of auxiliary coils mounted on a cubic structure with a side length of 273 cm, inside a large magnetically shielded room (MSR). We have assembled this system and characerized its performances with a mapping robot. The appar… ▽ More We present a coil system designed to generate a highly uniform magnetic field for the n2EDM experiment at the Paul Scherrer Institute. It consists of a main $B_0$ coil and a set of auxiliary coils mounted on a cubic structure with a side length of 273 cm, inside a large magnetically shielded room (MSR). We have assembled this system and characerized its performances with a mapping robot. The apparatus is able to generate a 1 $μ$ T vertical field with a relative root mean square deviation $σ$ ($B_z$)/$B_z$ = 3 $\times$ $10^{-5}$ over the volume of interest, a cylinder of radius 40 cm and height 30 cm. This level of uniformity overcomes the n2EDM requirements, allowing a measurement of the neutron Electric Dipole Moment with a sensitivity better than 1 $\times$ $10^{-27}$ ecm. △ Less

Submitted 15 February, 2025; v1 submitted 10 October, 2024; originally announced October 2024.

Comments: 20 pages, 13 figures

Lyman-$α$ feedback prevails at Cosmic Dawn: Implications for the first galaxies, stars, and star clusters

Authors: Olof Nebrin, Aaron Smith, Kevin Lorinc, Johan Hörnquist, Åsa Larson, Garrelt Mellema, Sambit K. Giri

Abstract: Radiation pressure from Lyman-$α$ (Ly$α$) scattering is a potentially dominant form of early stellar feedback, capable of injecting up to $\sim 100 \, \times$ more momentum into the interstellar medium (ISM) than UV continuum radiation pressure and stellar winds. Ly$α$ feedback is particularly strong in dust-poor environments and is thus especially important during the formation of the first stars… ▽ More Radiation pressure from Lyman-$α$ (Ly$α$) scattering is a potentially dominant form of early stellar feedback, capable of injecting up to $\sim 100 \, \times$ more momentum into the interstellar medium (ISM) than UV continuum radiation pressure and stellar winds. Ly$α$ feedback is particularly strong in dust-poor environments and is thus especially important during the formation of the first stars and galaxies. As upcoming galaxy formation simulations incorporate Ly$α$ feedback, it is crucial to consider processes that can limit it to avoid placing $Λ$CDM in apparent tension with recent \textit{JWST} observations indicating efficient star formation at Cosmic Dawn. We study Ly$α$ feedback using a novel analytical Ly$α$ radiative transfer solution that includes the effects of continuum absorption, gas velocity gradients, Ly$α$ destruction (e.g. by $2p \rightarrow 2s$ transitions), ISM turbulence, and atomic recoil. We verify our solution for uniform clouds using extensive Monte Carlo radiative transfer (MCRT) tests, and resolve a previous discrepancy between analytical and MCRT predictions. We then study the sensitivity of Ly$α$ feedback to the aforementioned effects. While these can dampen Ly$α$ feedback by a factor $\lesssim \textrm{few} \times 10$, we find it remains $\gtrsim 5 - 100 \, \times$ stronger than direct radiation pressure and therefore cannot be neglected. We provide an accurate fit for the Ly$α$ force multiplier $M_{\rm F}$, suitable for implementation in subgrid models for galaxy formation simulations. Our findings highlight the critical role of Ly$α$ feedback in regulating star formation at Cosmic Dawn, and underscore the necessity of incorporating it into simulations to accurately model early galaxy evolution. △ Less

Submitted 9 January, 2025; v1 submitted 28 September, 2024; originally announced September 2024.

Comments: Accepted for publication in MNRAS. 42 pages (31 pages main text, the rest an extensive Appendix + references), 20 figures

Closing the reproducibility gap: 2D materials research

Authors: Peter Bøggild, Timothy John Booth, Nolan Lassaline, Bjarke Sørensen Jessen, Abhay Shivayogimath, Stephan Hofmann, Kim Daasbjerg, Anders Smith, Kasper Nørgaard, Amaia Zurutuza, Inge Asselberghs, Terrance Barkan, Rafael Taboryski, Andrew J. Pollard

Abstract: 2D materials research has reached significant scientific milestones, accompanied by a rapidly growing industrial sector in the two decades since the field's inception. Such rapid progress requires pushing past the boundary of what is technically and scientifically feasible and carries the risk of disseminating irreproducible research results. This Expert Recommendation addresses the need for enhan… ▽ More 2D materials research has reached significant scientific milestones, accompanied by a rapidly growing industrial sector in the two decades since the field's inception. Such rapid progress requires pushing past the boundary of what is technically and scientifically feasible and carries the risk of disseminating irreproducible research results. This Expert Recommendation addresses the need for enhanced reproducibility in 2D materials science and physics. Through a comprehensive examination of the factors that affect reproducibility the authors present a set of concrete guidelines designed to improve the reliability of research results. The introduction of a Standardised Template for Experimental Procedures (STEP) offers a novel approach to documenting experimental details that are crucial for replication and troubleshooting. We emphasise the importance of involving stakeholders from research, industry, publishing, funding agencies, and policymaking to foster a culture of transparency, reliability, and trust without blind angles and critical oversights. By addressing systemic issues that hinder reproducibility and presenting actionable steps for improvement, we aim to pave the way for more robust research practices in 2D materials science, contributing to the field's scientific maturation and the subsequent development of beneficial technologies. △ Less

Submitted 18 September, 2024; originally announced September 2024.

Comments: 24 pages, 3 textboxes, 1 figure, 2 tables

Bypassing the filtering challenges in microwave-optical quantum transduction through optomechanical four-wave mixing

Authors: James Schneeloch, Erin Sheridan, A. Matthew Smith, Christopher C. Tison, Daniel L. Campbell, Matthew D. LaHaye, Michael L. Fanto, Paul M. Alsing

Abstract: Microwave-optical quantum transduction is a key enabling technology in quantum networking, but has been plagued by a formidable technical challenge. As most microwave-optical-transduction techniques rely on three-wave mixing processes, the processes consume photons from a driving telecom-band (pump) laser to convert input microwave photons into telecom-band photons detuned from the laser by this m… ▽ More Microwave-optical quantum transduction is a key enabling technology in quantum networking, but has been plagued by a formidable technical challenge. As most microwave-optical-transduction techniques rely on three-wave mixing processes, the processes consume photons from a driving telecom-band (pump) laser to convert input microwave photons into telecom-band photons detuned from the laser by this microwave frequency. However, cleanly separating out single photons detuned only a few GHz away from a classically bright laser in the same spatial mode requires frequency filters of unprecedented extinction over a very narrow transition band, straining the capabilities of today's technology. Instead of confronting this challenge directly, we show how one may achieve the same transduction objective with comparable efficiency using a four-wave mixing process in which $pairs$ of pump photons are consumed to produce transduced optical photons widely separated in frequency from the pump. We develop this process by considering higher-order analogues of photoelasticity and electrostriction than those used in conventional optomechanics, and examine how the efficiency of this process can be made to exceed conventional optomechanical couplings. △ Less

Submitted 27 September, 2024; originally announced September 2024.

Comments: 5 pages + 2 more for appendices, and 1 figure

Dense Suspension Inertial Microfluidic Particle Theory (DENSE-IMPACT) Model for Elucidating Outer Wall Focusing at High Cell Densities

Authors: Soon Wei Daniel Lim, Yong How Kee, Scott Nicholas Allan Smith, Shan Mei Tan, An Eng Lim, Yuansheng Yang, Shireen Goh

Abstract: Inertial microfluidics has been limited to dilute particle concentrations due to defocusing (spreading out) at high particle concentrations. We observe a counterintuitive shift of focusing to the outer curved wall under high concentration flow, which contradicts the existing particle focusing theory. We developed a multiphase model incorporating lift forces and particle-particle interactions to ex… ▽ More Inertial microfluidics has been limited to dilute particle concentrations due to defocusing (spreading out) at high particle concentrations. We observe a counterintuitive shift of focusing to the outer curved wall under high concentration flow, which contradicts the existing particle focusing theory. We developed a multiphase model incorporating lift forces and particle-particle interactions to explain this behaviour. Numerical simulations validated by experimental data reveal the shift is governed by the ratio of the lift force strength to that of particle interaction frequencies. △ Less

Submitted 14 November, 2024; v1 submitted 19 September, 2024; originally announced September 2024.

Tunable frequency conversion in doped photonic crystal fiber pumped near degeneracy

Authors: Leah R Murphy, Mateusz J Olszewski, Petros Androvitsaneas, Miguel Alvarez Perez, Will A M Smith, Anthony J Bennett, Peter J Mosley, Alex O C Davis

Abstract: Future quantum networks will rely on the ability to coherently transfer optically encoded quantum information between different wavelength bands. Bragg-scattering four-wave mixing in optical fiber is a promising route to achieving this, but requires fibers with precise dispersion control and broadband transmission at signal, target and pump wavelengths. Here we introduce a photonic crystal fiber w… ▽ More Future quantum networks will rely on the ability to coherently transfer optically encoded quantum information between different wavelength bands. Bragg-scattering four-wave mixing in optical fiber is a promising route to achieving this, but requires fibers with precise dispersion control and broadband transmission at signal, target and pump wavelengths. Here we introduce a photonic crystal fiber with a germanium-doped core featuring group velocity matching at 1550 nm, the telecoms C-band, and 920 nm, within the emission range of efficient single photon sources based on InAs quantum dots. With low chromatic walk-off and good optical guidance even at long wavelengths, large lengths of this fiber are used to achieve nanometer-scale frequency shifts between wavelengths around 920 nm with up to 79.4\% internal conversion efficiency, allowing dissimilar InAs dots to be interfaced. We also show how cascading this frequency conversion can be used to generate a frequency comb away from telecoms wavelengths. Finally, we use the fiber to demonstrate tunable frequency conversion of weak classical signals around 918 nm to the telecoms C-band. △ Less

Submitted 12 July, 2024; originally announced July 2024.

Transfer printing micro-assembly of silicon photonic crystal cavity arrays: beating the fabrication tolerance limit

Authors: Sean P. Bommer, Christopher Panuski, Benoit Guilhabert, Zhongyi Xia, Jack A. Smith, Martin D. Dawson, Dirk Englund, Michael J. Strain

Abstract: Photonic crystal cavities (PhCCs) can confine optical fields in ultra-small volumes, enabling efficient light-matter interactions for quantum and non-linear optics, sensing and all-optical signal processing. The inherent nanometric tolerances of micro-fabrication platforms can induce cavity resonant wavelength shifts two-orders of magnitude larger than cavity linewidths, prohibiting fabrication of… ▽ More Photonic crystal cavities (PhCCs) can confine optical fields in ultra-small volumes, enabling efficient light-matter interactions for quantum and non-linear optics, sensing and all-optical signal processing. The inherent nanometric tolerances of micro-fabrication platforms can induce cavity resonant wavelength shifts two-orders of magnitude larger than cavity linewidths, prohibiting fabrication of arrays of nominally identical devices. We address this device variability by fabricating PhCCs as releasable pixels that can be transferred from their native substrate to a receiver where ordered micro-assembly can overcome the inherent fabrication variance. We demonstrate the measurement, binning and transfer of 119 PhCCs in a single session, producing spatially ordered arrays of PhCCs, sorted by resonant wavelength. Furthermore, the rapid in-situ measurement of the devices enables measurements of the PhCCs dynamic response to the print process for the first time, showing plastic and elastic effects in the seconds to hours range. △ Less

Submitted 28 June, 2024; originally announced June 2024.

A green solvent system for precursor phase-engineered sequential deposition of stable formamidinium lead triiodide for perovskite solar cells

Authors: Benjamin M. Gallant, Philippe Holzhey, Joel A. Smith, Saqlain Choudhary, Karim A. Elmestekawy, Pietro Caprioglio, Igal Levine, Alex Sheader, Fengning Yang, Daniel T. W. Toolan, Rachel C. Kilbride, Augustin K. A. Zaininger, James M. Ball, M. Greyson Christoforo, Nakita Noel, Laura M. Herz, Dominik J. Kubicki, Henry J. Snaith

Abstract: Perovskite solar cells (PSCs) offer an efficient, inexpensive alternative to current photovoltaic technologies, with the potential for manufacture via high-throughput coating methods. However, challenges for commercial-scale solution-processing of metal-halide perovskites include the use of harmful solvents, the expense of maintaining controlled atmospheric conditions, and the inherent instabiliti… ▽ More Perovskite solar cells (PSCs) offer an efficient, inexpensive alternative to current photovoltaic technologies, with the potential for manufacture via high-throughput coating methods. However, challenges for commercial-scale solution-processing of metal-halide perovskites include the use of harmful solvents, the expense of maintaining controlled atmospheric conditions, and the inherent instabilities of PSCs under operation. Here, we address these challenges by introducing a high volatility, low toxicity, biorenewable solvent system to fabricate a range of 2D perovskites, which highly effective precursor phases for subsequent transformation to alpha-formamidinium lead triiodide (FAPbI3), fully processed under ambient conditions. PSCs utilising our FAPbI3 reproducibly show remarkable stability under illumination and elevated temperature (ISOS-L-2) and "damp heat" (ISOS-D-3) stressing, surpassing other state-of-the-art perovskite compositions. We determine that this enhancement is a consequence of the 2D precursor phase crystallisation route, which simultaneously avoids retention of residual low-volatility solvents (such as DMF and DMSO) and reduces the rate of degradation of FA+ in the material. Our findings highlight both the critical role of the initial crystallisation process in determining the operational stability of perovskite materials, and that neat FA+-based perovskites can be competitively stable despite the inherent metastability of the alpha-phase. △ Less

Submitted 14 June, 2024; v1 submitted 12 June, 2024; originally announced June 2024.

Science Fiction Media Representations of Exoplanets: Portrayals of Changing Astronomical Discoveries

Authors: Emma Johanna Puranen, Emily Finer, Christiane Helling, V Anne Smith

Abstract: Interest in science fiction's (SF's) potential science communication use is hindered by concerns about SF misrepresenting science. This study addresses these concerns by asking how SF media reflects scientific findings in exoplanet science. A database of SF exoplanets was analysed using a Bayesian network to find interconnected interactions between planetary characterisation features and literary… ▽ More Interest in science fiction's (SF's) potential science communication use is hindered by concerns about SF misrepresenting science. This study addresses these concerns by asking how SF media reflects scientific findings in exoplanet science. A database of SF exoplanets was analysed using a Bayesian network to find interconnected interactions between planetary characterisation features and literary data. Results reveal SF exoplanets designed after the discovery of real exoplanets are less Earth-like, providing statistical evidence that SF incorporates rapidly-evolving science. Understanding SF's portrayal of science is crucial for its potential use in science communication. △ Less

Submitted 4 March, 2024; originally announced May 2024.

Comments: 19 pages, 1 table, 2 figures

Journal ref: JCOM Journal of Science Communication 23(1) 2024

The LHCb VELO Upgrade Module Construction

Authors: K. Akiba, M. Alexander, C. Bertella, A. Biolchini, A. Bitadze, G. Bogdanova, S. Borghi, T. J. V. Bowcock, K. Bridges, M. Brock, A. T. Burke, J. Buytaert, W. Byczynski, J. Carroll, V. Coco, P. Collins, A. Davis, O. De Aguiar Francisco, K. De Bruyn, S. De Capua, K. De Roo, F. Doherty, L. Douglas, L. Dufour, R. Dumps , et al. (62 additional authors not shown)

Abstract: The LHCb detector has undergone a major upgrade for LHC Run 3. This Upgrade I detector facilitates operation at higher luminosity and utilises full-detector information at the LHC collision rate, critically including the use of vertex information. A new vertex locator system, the VELO Upgrade, has been constructed. The core element of the new VELO are the double-sided pixelated hybrid silicon dete… ▽ More The LHCb detector has undergone a major upgrade for LHC Run 3. This Upgrade I detector facilitates operation at higher luminosity and utilises full-detector information at the LHC collision rate, critically including the use of vertex information. A new vertex locator system, the VELO Upgrade, has been constructed. The core element of the new VELO are the double-sided pixelated hybrid silicon detector modules which operate in vacuum close to the LHC beam in a high radiation environment. The construction and quality assurance tests of these modules are described in this paper. The modules incorporate 200 \mum thick, n-on-p silicon sensors bump-bonded to 130 \nm technology ASICs. These are attached with high precision to a silicon microchannel substrate that uses evaporative CO$_2$ cooling. The ASICs are controlled and read out with flexible printed circuits that are glued to the substrate and wire-bonded to the chips. The mechanical support of the module is given by a carbon fibre plate, two carbon fibre rods and an aluminium plate. The sensor attachment was achieved with an average precision of 21 $\mathrm{μm}$, more than 99.5\% of all pixels are fully functional, and a thermal figure of merit of 3 \mathrm{Kcm^{2}W^{-1}}$ was achieved. The production of the modules was successfully completed in 2021, with the final assembly and installation completed in time for data taking in 2022. △ Less

Submitted 21 April, 2024; originally announced April 2024.

Report number: LHCb-DP-2024-001

Crosstalk-mitigated microelectronic control for optically-active spins

Authors: Hao-Cheng Weng, John G. Rarity, Krishna C. Balram, Joe A. Smith

Abstract: To exploit the sub-nanometre dimensions of qubits for large-scale quantum information processing, corresponding control architectures require both energy and space efficiency, with the on-chip footprint of unit-cell electronics ideally micron-scale. However, the spin coherence of qubits in close packing is severely deteriorated by microwave crosstalk from neighbouring control sites. Here, we prese… ▽ More To exploit the sub-nanometre dimensions of qubits for large-scale quantum information processing, corresponding control architectures require both energy and space efficiency, with the on-chip footprint of unit-cell electronics ideally micron-scale. However, the spin coherence of qubits in close packing is severely deteriorated by microwave crosstalk from neighbouring control sites. Here, we present a crosstalk-mitigation scheme using foundry microelectronics, to address solid-state spins at sub-100 um spacing without the need for qubit-detuning. Using nitrogen-vacancy centres in nanodiamonds as qubit prototypes, we first demonstrate 10 MHz Rabi oscillation at milliwatts of microwave power. Implementing the active cancellation, we then prove that the crosstalk field from neighbouring lattice sites can be reduced to undetectable levels. We finally extend the scheme to show increased qubit control, tripling the spin coherence under crosstalk mitigation. Compatible with integrated optics, our results present a step towards scalable control across quantum platforms using silicon microelectronics. △ Less

Submitted 5 April, 2024; originally announced April 2024.

Comments: 11 pages, 5 figures

Criticality in an imidazolium ionic liquid fully wetting a sapphire support

Authors: Kevin Höllring, Nataša Vučemilović-Alagić, David M. Smith, Ana-Sunčana Smith

Abstract: Hypothesis: Ionic liquids have various applications in catalytic reaction environments. In those systems, their interaction with interfaces is key to their performance as a liquid phase. We hypothesize that the way a monolayer ionic liquid phase interacts with interfaces like a sapphire substrate is significantly dependent on temperature and that critical behavior can be observed in the structural… ▽ More Hypothesis: Ionic liquids have various applications in catalytic reaction environments. In those systems, their interaction with interfaces is key to their performance as a liquid phase. We hypothesize that the way a monolayer ionic liquid phase interacts with interfaces like a sapphire substrate is significantly dependent on temperature and that critical behavior can be observed in the structural properties of the liquid film. Methods and simulations: We perform molecular dynamics simulations of imidazolium-based ionic liquid monolayers deposited on a sapphire substrate at temperatures from 200K to 400K. We develop computational tools to analyze structural properties of molecular arrangement in the monolayer, the structure of the film and the defects spontaneously forming and healing. Findings: We observe a clear structural phase transition at around 300K from a solid-like to a liquid-like behavior of a film. Below the critical point an alternating crystalline structure of cations and anions with alignment of periodic vectors with the underlying substrate grid is observed, with frozen defects. Above the critical temperature, the pattern becomes isotropic within the contact layer that displays dynamic defects of a characteristic size. Our results highlight the importance of confinement to the phase behavior of the system. △ Less

Submitted 13 March, 2024; originally announced March 2024.

Comments: 13 pages, 12 pages pure manuscript, 9 figures, Submitted to JCIS

Hong-Ou-Mandel Comb and Switch using parallel chains of non-identical Micro-Ring Resonators

Authors: Peter L. Kaulfuss, Paul M. Alsing, Richard J. Birrittella, A. Matthew Smith, James Schneeloch, Edwin E. Hach III

Abstract: Micro-Ring Resonators (MRRs) allow us to access the Hong-Ou-Mandel (HOM) effect at a variety of tunable parameter combinations along exact analytic solutions. This higher-dimensional space of parameters for which the HOM effect occurs constitutes what is known as a Hong-Ou-Mandel manifold (HOMM). Using a parallel series of non-identical MRRs and changing relative round-trip phase shifts between MR… ▽ More Micro-Ring Resonators (MRRs) allow us to access the Hong-Ou-Mandel (HOM) effect at a variety of tunable parameter combinations along exact analytic solutions. This higher-dimensional space of parameters for which the HOM effect occurs constitutes what is known as a Hong-Ou-Mandel manifold (HOMM). Using a parallel series of non-identical MRRs and changing relative round-trip phase shifts between MRRs allows for the manipulation of the wavelength locations of the HOM effect. Through clever design and fabrication, we can mold the HOMM to place multiple HOM effects, or lack thereof, precisely at desired locations in wavelength. In this paper we discuss how to adjust non-identical MRR parameters to change the resulting HOMM. We also promote example designs that exhibit advantageous HOMM structures, and highlight some of the diverse possibilities that can be accessed with different circuit design. Our main examples are: 1) a wavelength division multiplexer example that matches the HOM effect locations with the already established channels to integrate with a classical communication network and 2) a HOM-based entanglement switch that allows for the rapid switching between 2-photon NOON state outputs and completely separable single photon outputs. △ Less

Submitted 14 March, 2025; v1 submitted 25 January, 2024; originally announced January 2024.

Comments: 14 pages, 10 figures

A Global Analysis of Pre-Earthquake Ionospheric Anomalies

Authors: Luke Cullen, Andy W Smith, Asadullah H Galib, Debvrat Varshney, Edward J E Brown, Peter J Chi, Xiangning Chu, Filip Svoboda

Abstract: Local ionospheric density anomalies have been reported in the days prior to major earthquakes. This global study statistically investigates whether consistent ionospheric anomalies occur in the 24 hours prior to earthquakes across different regions, magnitudes, temporal and spatial scales. We match earthquake data to Total Electron Content (TEC) data from 2000-2020 at a higher resolution and caden… ▽ More Local ionospheric density anomalies have been reported in the days prior to major earthquakes. This global study statistically investigates whether consistent ionospheric anomalies occur in the 24 hours prior to earthquakes across different regions, magnitudes, temporal and spatial scales. We match earthquake data to Total Electron Content (TEC) data from 2000-2020 at a higher resolution and cadence than previous assessed. Globally, no significant, consistent anomaly is found. Regionally, statistically significant ionospheric anomalies arise in the 12 hours prior to earthquakes with $p \leq 0.01$ following Wilcoxon tests. For the Japanese region we find a median negative ionospheric anomaly of around 0.5 TECU between 3 and 8 hours before earthquakes. For the South American region, the median TEC is enhanced by up to ~ 2 TECU, between 7 and 10 hours before an event. We show that the results are robust to different definitions of the ''local'' region and earthquake magnitude. This demonstrates the promise of monitoring the ionosphere as part of a multimodal earthquake forecasting system. △ Less

Submitted 3 January, 2024; originally announced January 2024.

Comments: 12 pages, 4 figures. Presented at AGU fall meeting 2022 (https://agu.confex.com/agu/fm22/meetingapp.cgi/Paper/1142329)

Metachronal coordination at the mesoscale

Authors: Sebastian Ziegler, Megan Delens, Ylona Collard, Maxime Hubert, Nicolas Vandewalle, Ana-Sunčana Smith

Abstract: In nature, metachronal coordination is an efficient strategy for fluid pumping and self-propulsion. Yet, mimetic systems for this type of organization are scarce. Recently, metachronal motion was observed in a bead-based magnetocapillary mesoswimmer, but the mechanism of such device's behavior remained unclear. Here, we combine theory and experiments to explain two swimming regimes that we identif… ▽ More In nature, metachronal coordination is an efficient strategy for fluid pumping and self-propulsion. Yet, mimetic systems for this type of organization are scarce. Recently, metachronal motion was observed in a bead-based magnetocapillary mesoswimmer, but the mechanism of such device's behavior remained unclear. Here, we combine theory and experiments to explain two swimming regimes that we identify by modulation of the driving frequency. In the linear, low-frequency regime, the swimmer motion originates from individual bead rotations. However, the high-frequency, metachronal regime is dominated by deformations of the device near a mechanical resonance, which highlights the role of bead inertia for optimized self-propulsion. △ Less

Submitted 6 November, 2023; originally announced November 2023.

Comments: Article: 6 pages, 3 figures; Supplementary information: 5 pages, 8 figures

Pushing the high count rate limits of scintillation detectors for challenging neutron-capture experiments

Authors: J. Balibrea Correa, J. Lerendegui-Marco, V. Babiano-Suarez, C. Domingo-Pardo, I. Ladarescu, A. Tarifeño-Saldivia, V. Alcayne, D. Cano-Ott, E. González-Romero, T. Martínez, E. Mendoza, A. Pérez de Rada, J. Plaza del Olmo, A. Sánchez-Caballero, A. Casanovas, F. Calviño, S. Valenta, O. Aberle, S. Altieri, S. Amaducci, J. Andrzejewski, M. Bacak, C. Beltrami, S. Bennett, A. P. Bernardes , et al. (109 additional authors not shown)

Abstract: One of the critical aspects for the accurate determination of neutron capture cross sections when combining time-of-flight and total energy detector techniques is the characterization and control of systematic uncertainties associated to the measuring devices. In this work we explore the most conspicuous effects associated to harsh count rate conditions: dead-time and pile-up effects. Both effects… ▽ More One of the critical aspects for the accurate determination of neutron capture cross sections when combining time-of-flight and total energy detector techniques is the characterization and control of systematic uncertainties associated to the measuring devices. In this work we explore the most conspicuous effects associated to harsh count rate conditions: dead-time and pile-up effects. Both effects, when not properly treated, can lead to large systematic uncertainties and bias in the determination of neutron cross sections. In the majority of neutron capture measurements carried out at the CERN n\_TOF facility, the detectors of choice are the C$_{6}$D$_{6}$ liquid-based either in form of large-volume cells or recently commissioned sTED detector array, consisting of much smaller-volume modules. To account for the aforementioned effects, we introduce a Monte Carlo model for these detectors mimicking harsh count rate conditions similar to those happening at the CERN n\_TOF 20~m fligth path vertical measuring station. The model parameters are extracted by comparison with the experimental data taken at the same facility during 2022 experimental campaign. We propose a novel methodology to consider both, dead-time and pile-up effects simultaneously for these fast detectors and check the applicability to experimental data from $^{197}$Au($n$,$γ$), including the saturated 4.9~eV resonance which is an important component of normalization for neutron cross section measurements. △ Less

Submitted 2 November, 2023; originally announced November 2023.

Recyclable vitrimer-based printed circuit board for circular electronics

Authors: Zhihan Zhang, Agni K. Biswal, Ankush Nandi, Kali Frost, Jake A. Smith, Bichlien H. Nguyen, Shwetak Patel, Aniruddh Vashisth, Vikram Iyer

Abstract: Electronics are integral to modern life; however, at their end-of-life these devices produce environmentally hazardous electronic waste (e-waste). Recycling the ubiquitous printed circuit boards (PCBs) that make up a substantial mass and volume fraction of e-waste is challenging due to their use of irreversibly cured thermoset epoxies. We present a PCB formulation using transesterification vitrime… ▽ More Electronics are integral to modern life; however, at their end-of-life these devices produce environmentally hazardous electronic waste (e-waste). Recycling the ubiquitous printed circuit boards (PCBs) that make up a substantial mass and volume fraction of e-waste is challenging due to their use of irreversibly cured thermoset epoxies. We present a PCB formulation using transesterification vitrimers (vPCBs), and an end-to-end fabrication process compatible with standard manufacturing ecosystems. We create functional prototypes of IoT devices transmitting 2.4 GHz radio signals on vPCBs with electrical and mechanical properties meeting industry standards. Fractures and holes in vPCBs can be repaired while retaining comparable performance over more than four repair cycles. We further demonstrate non-destructive decomposition of transesterification vitrimer composites with solid inclusions and metal attachments by polymer swelling with small molecule solvents. We hypothesize that unlike traditional solvolysis recycling, swelling does not degrade the materials. Through dynamic mechanical analysis we find negligible catalyst loss, minimal changes in storage modulus, and equivalent polymer backbone composition across multiple recycling cycles. We achieve 98% polymer recovery, 100% fiber recovery, and 91% solvent recovery which we reuse to create new vPCBs without degraded performance. Our cradle-to-cradle life-cycle assessment shows substantial environmental impact reduction over conventional PCBs in 11 categories. △ Less

Submitted 23 August, 2023; originally announced August 2023.

Comments: 45 pages, 14 figures, journal

Journal ref: Nat Sustain 7, 616-627 (2024)

Molecular Dynamics Simulation of Apolipoprotein E3 Lipid Nanodiscs

Authors: Patrick Allen, Adam C. Smith, Vernon Benedicto, Abbas Abdulhassan, Vasanthy Narayanaswami, Enrico Tapavicza

Abstract: Nanodiscs are binary discoidal complexes of a phospholipid bilayer circumscribed by belt-like helical scaffold proteins. Using coarse-grained and all-atom molecular dynamics simulations, we explore the stability, size, and structure of nanodiscs formed between the N-terminal domain of apolipoprotein E3 (apoE3-NT) and variable number of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) molecules.… ▽ More Nanodiscs are binary discoidal complexes of a phospholipid bilayer circumscribed by belt-like helical scaffold proteins. Using coarse-grained and all-atom molecular dynamics simulations, we explore the stability, size, and structure of nanodiscs formed between the N-terminal domain of apolipoprotein E3 (apoE3-NT) and variable number of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) molecules. We study both parallel and antiparallel double-belt configurations, consisting of four proteins per nanodisc. Our simulations predict nanodiscs containing between 240 and 420 DMPC molecules to be stable. The antiparallel configurations exhibit an average of 1.6 times more amino acid interactions between protein chains and 2 times more ionic contacts, compared to the parallel configuration. With one exception, DMPC order parameters are consistently larger in the antiparallel configuration than in the parallel one. In most cases, the root mean square deviation of the positions of the protein backbone atoms is smaller in the antiparallel configuration. We further report nanodisc size, thickness, radius of gyration, and solvent accessible surface area. Combining all investigated parameters, we hypothesize the antiparallel protein configuration leading to more stable and more rigid nanodiscs than the parallel one. △ Less

Submitted 20 August, 2023; originally announced August 2023.

Simulating Cardiac Fluid Dynamics in the Human Heart

Authors: Marshall Davey, Charles Puelz, Simone Rossi, Margaret Anne Smith, David R. Wells, Greg Sturgeon, W. Paul Segars, John P. Vavalle, Charles S. Peskin, Boyce E. Griffith

Abstract: Cardiac fluid dynamics fundamentally involves interactions between complex blood flows and the structural deformations of the muscular heart walls and the thin, flexible valve leaflets. There has been longstanding scientific, engineering, and medical interest in creating mathematical models of the heart that capture, explain, and predict these fluid-structure interactions. However, existing comput… ▽ More Cardiac fluid dynamics fundamentally involves interactions between complex blood flows and the structural deformations of the muscular heart walls and the thin, flexible valve leaflets. There has been longstanding scientific, engineering, and medical interest in creating mathematical models of the heart that capture, explain, and predict these fluid-structure interactions. However, existing computational models that account for interactions among the blood, the actively contracting myocardium, and the cardiac valves are limited in their abilities to predict valve performance, resolve fine-scale flow features, or use realistic descriptions of tissue biomechanics. Here we introduce and benchmark a comprehensive mathematical model of cardiac fluid dynamics in the human heart. A unique feature of our model is that it incorporates biomechanically detailed descriptions of all major cardiac structures that are calibrated using tensile tests of human tissue specimens to reflect the heart's microstructure. Further, it is the first fluid-structure interaction model of the heart that provides anatomically and physiologically detailed representations of all four cardiac valves. We demonstrate that this integrative model generates physiologic dynamics, including realistic pressure-volume loops that automatically capture isovolumetric contraction and relaxation, and predicts fine-scale flow features. None of these outputs are prescribed; instead, they emerge from interactions within our comprehensive description of cardiac physiology. Such models can serve as tools for predicting the impacts of medical devices or clinical interventions. They also can serve as platforms for mechanistic studies of cardiac pathophysiology and dysfunction, including congenital defects, cardiomyopathies, and heart failure, that are difficult or impossible to perform in patients. △ Less

Submitted 24 October, 2023; v1 submitted 5 July, 2023; originally announced July 2023.

Anisotropic molecular diffusion in confinement II: A model for structurally complex particles applied to transport in thin ionic liquid films

Authors: Kevin Höllring, Andreas Baer, Nataša Vučemilović-Alagić, David M. Smith, Ana-Sunčana Smith

Abstract: Hypothesis:Diffusion in confinement is an important fundamental problem with significant implications for applications of supported liquid phases. However, resolving the spatially dependent diffusion coefficient, parallel and perpendicular to interfaces, has been a standing issue and for objects of nanometric size, which structurally fluctuate on a similar time scale as they diffuse, no methodolog… ▽ More Hypothesis:Diffusion in confinement is an important fundamental problem with significant implications for applications of supported liquid phases. However, resolving the spatially dependent diffusion coefficient, parallel and perpendicular to interfaces, has been a standing issue and for objects of nanometric size, which structurally fluctuate on a similar time scale as they diffuse, no methodology has been established so far. We hypothesise that the complex, coupled dynamics can be captured and analysed by using a model built on the $2$-dimensional Smoluchowski equation and systematic coarse-graining. Methods and simulations: For large, flexible species, a universal approach is offered that does not make any assumptions about the separation of time scales between translation and other degrees of freedom. The method is validated on Molecular Dynamics simulations of bulk systems of a family of ionic liquids with increasing cation sizes where internal degrees of freedom have little to major effects. Findings: After validation on bulk liquids, where we provide an interpretation of two diffusion constants for each species found experimentally, we clearly demonstrate the anisotropic nature of diffusion coefficients at interfaces. Spatial variations in the diffusivities relate to interface-induced structuring of the ionic liquids. Notably, the length scales in strongly confined ionic liquids vary consistently but differently at the solid-liquid and liquid-vapour interfaces. △ Less

Submitted 26 June, 2023; originally announced June 2023.

Comments: 21 pages, 14 figures, 5 tables, pdflatex, submitted to JCIS; This is a follow-up to "Anisotropic molecular diffusion in confinement I: Transport of small particles in potential and density gradients" due to a split of arXiv:archive/2212.09545

Radiative cooling effects on reverse shocks formed by magnetised supersonic plasma flows

Authors: S. Merlini, J. D. Hare, G. C. Burdiak, J. W. D. Halliday, A. Ciardi, J. P. Chittenden, T. Clayson, A. J. Crilly, S. J. Eardley, K. E. Marrow, D. R. Russell, R. A. Smith, N. Stuart, L. G. Suttle, E. R. Tubman, V. Valenzuela-Villaseca, T. W. O. Varnish, S. V. Lebedev

Abstract: We study the structure of reverse shocks formed by the collision of supersonic, magnetised plasma flows driven by an inverse (or exploding) wire array with a planar conducting obstacle. We observe that the structure of these reverse shocks varies dramatically with wire material, despite the similar upstream flow velocities and mass densities. For aluminium wire arrays, the shock is sharp and well… ▽ More We study the structure of reverse shocks formed by the collision of supersonic, magnetised plasma flows driven by an inverse (or exploding) wire array with a planar conducting obstacle. We observe that the structure of these reverse shocks varies dramatically with wire material, despite the similar upstream flow velocities and mass densities. For aluminium wire arrays, the shock is sharp and well defined, consistent with magneto-hydrodynamic theory. In contrast, we do not observe a well-defined shock using tungsten wires, instead, we see a broad region dominated by density fluctuations on a wide range of spatial scales. We diagnose these two very different interactions using interferometry, Thomson scattering, shadowgraphy, and a newly developed imaging refractometer which is sensitive to small deflections of the probing laser corresponding to small-scale density perturbations. We conclude that the differences in shock structure are most likely due to radiative cooling instabilities which create small-scale density perturbations elongated along magnetic field lines in the tungsten plasma. These instabilities grow more slowly and are smoothed by thermal conduction in the aluminium plasma. △ Less

Submitted 7 August, 2023; v1 submitted 2 June, 2023; originally announced June 2023.

Journal ref: Phys. Plasmas 30, 092102 (2023)

Robotic vectorial field alignment for spin-based quantum sensors

Authors: Joe A. Smith, Dandan Zhang, Krishna C. Balram

Abstract: Developing practical quantum technologies will require the exquisite manipulation of fragile systems in a robust and repeatable way. As quantum technologies move towards real world applications, from biological sensing to communication in space, increasing experimental complexity introduces constraints that can be alleviated by the introduction of new technologies. Robotics has shown tremendous pr… ▽ More Developing practical quantum technologies will require the exquisite manipulation of fragile systems in a robust and repeatable way. As quantum technologies move towards real world applications, from biological sensing to communication in space, increasing experimental complexity introduces constraints that can be alleviated by the introduction of new technologies. Robotics has shown tremendous progress in realising increasingly smart, autonomous and highly dexterous machines. Here, we demonstrate that a robotic arm equipped with a magnet can sensitise an NV centre quantum magnetometer in challenging conditions unachievable with standard techniques. We generate vector magnetic field with $1^\circ$ angular and 0.1 mT amplitude accuracy and determine the orientation of a single stochastically-aligned spin-based sensor in a constrained physical environment. Our work opens up the prospect of integrating robotics across many quantum degrees of freedom in constrained settings, allowing for increased prototyping speed, control, and robustness in quantum technology applications. △ Less

Submitted 16 June, 2023; v1 submitted 26 May, 2023; originally announced May 2023.

Comments: 11 pages, 4 figures. Small correction in first paragraph

Journal ref: Advanced Science 2024, 11, 2, 2304449

The LHCb upgrade I

Authors: LHCb collaboration, R. Aaij, A. S. W. Abdelmotteleb, C. Abellan Beteta, F. Abudinén, C. Achard, T. Ackernley, B. Adeva, M. Adinolfi, P. Adlarson, H. Afsharnia, C. Agapopoulou, C. A. Aidala, Z. Ajaltouni, S. Akar, K. Akiba, P. Albicocco, J. Albrecht, F. Alessio, M. Alexander, A. Alfonso Albero, Z. Aliouche, P. Alvarez Cartelle, R. Amalric, S. Amato , et al. (1298 additional authors not shown)

Abstract: The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their select… ▽ More The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software. △ Less

Submitted 10 September, 2024; v1 submitted 17 May, 2023; originally announced May 2023.

Comments: All figures and tables, along with any supplementary material and additional information, are available at http://lhcbproject.web.cern.ch/lhcbproject/Publications/LHCbProjectPublic/LHCb-DP-2022-002.html (LHCb public pages)

Report number: LHCb-DP-2022-002

Journal ref: JINST 19 (2024) P05065

The Next Generation Arecibo Telescope: A preliminary study

Authors: D. Anish Roshi, Sean Marshall, Amit Vishwas, Mike Sulzer, P. K. Manoharan, Maxime Devogele, Flaviane Venditti, Allison Smith, Sravani Vaddi, Arun Venkataraman, Phil Perillat, Julie Brisset

Abstract: The Next Generation Arecibo Telescope (NGAT) was a concept presented in a white paper Roshi et al. (2021) developed by members of the Arecibo staff and user community immediately after the collapse of the 305 m legacy telescope. A phased array of small parabolic antennas placed on a tiltable plate-like structure forms the basis of the NGAT concept. The phased array would function both as a transmi… ▽ More The Next Generation Arecibo Telescope (NGAT) was a concept presented in a white paper Roshi et al. (2021) developed by members of the Arecibo staff and user community immediately after the collapse of the 305 m legacy telescope. A phased array of small parabolic antennas placed on a tiltable plate-like structure forms the basis of the NGAT concept. The phased array would function both as a transmitter and as a receiver. This envisioned state of the art instrument would offer capabilities for three research fields, viz. radio astronomy, planetary and space & atmospheric sciences. The proposed structure could be a single plate or a set of closely spaced segments, and in either case it would have an equivalent collecting area of a parabolic dish of size 300 m. In this study we investigate the feasibility of realizing the structure. Our analysis shows that, although a single structure ~300 m in size is achievable, a scientifically competitive instrument 130 to 175 m in size can be developed in a more cost effective manner. We then present an antenna configuration consisting of one hundred and two 13 m diameter dishes. The diameter of an equivalent collecting area single dish would be ~130 m, and the size of the structure would be ~146 m. The weight of the structure is estimated to be 4300 tons which would be 53% of the weight of the Green Bank Telescope. We refer to this configuration as NGAT-130. We present the performance of the NGAT-130 and show that it surpasses all other radar and single dish facilities. Finally, we briefly discuss its competitiveness for radio astronomy, planetary and space & atmospheric science applications. △ Less

Submitted 12 May, 2023; originally announced May 2023.

Comments: 6 pages, 5 figures, 1 table, Invited paper for the ICEAA-IEEE APWC conference, Venice, Italy, Oct 9-13, 2023

Temporal Subsampling Diminishes Small Spatial Scales in Recurrent Neural Network Emulators of Geophysical Turbulence

Authors: Timothy A. Smith, Stephen G. Penny, Jason A. Platt, Tse-Chun Chen

Abstract: The immense computational cost of traditional numerical weather and climate models has sparked the development of machine learning (ML) based emulators. Because ML methods benefit from long records of training data, it is common to use datasets that are temporally subsampled relative to the time steps required for the numerical integration of differential equations. Here, we investigate how this o… ▽ More The immense computational cost of traditional numerical weather and climate models has sparked the development of machine learning (ML) based emulators. Because ML methods benefit from long records of training data, it is common to use datasets that are temporally subsampled relative to the time steps required for the numerical integration of differential equations. Here, we investigate how this often overlooked processing step affects the quality of an emulator's predictions. We implement two ML architectures from a class of methods called reservoir computing: (1) a form of Nonlinear Vector Autoregression (NVAR), and (2) an Echo State Network (ESN). Despite their simplicity, it is well documented that these architectures excel at predicting low dimensional chaotic dynamics. We are therefore motivated to test these architectures in an idealized setting of predicting high dimensional geophysical turbulence as represented by Surface Quasi-Geostrophic dynamics. In all cases, subsampling the training data consistently leads to an increased bias at small spatial scales that resembles numerical diffusion. Interestingly, the NVAR architecture becomes unstable when the temporal resolution is increased, indicating that the polynomial based interactions are insufficient at capturing the detailed nonlinearities of the turbulent flow. The ESN architecture is found to be more robust, suggesting a benefit to the more expensive but more general structure. Spectral errors are reduced by including a penalty on the kinetic energy density spectrum during training, although the subsampling related errors persist. Future work is warranted to understand how the temporal resolution of training data affects other ML architectures. △ Less

Submitted 21 September, 2023; v1 submitted 28 April, 2023; originally announced May 2023.

Constraining Chaos: Enforcing dynamical invariants in the training of recurrent neural networks

Authors: Jason A. Platt, Stephen G. Penny, Timothy A. Smith, Tse-Chun Chen, Henry D. I. Abarbanel

Abstract: Drawing on ergodic theory, we introduce a novel training method for machine learning based forecasting methods for chaotic dynamical systems. The training enforces dynamical invariants--such as the Lyapunov exponent spectrum and fractal dimension--in the systems of interest, enabling longer and more stable forecasts when operating with limited data. The technique is demonstrated in detail using th… ▽ More Drawing on ergodic theory, we introduce a novel training method for machine learning based forecasting methods for chaotic dynamical systems. The training enforces dynamical invariants--such as the Lyapunov exponent spectrum and fractal dimension--in the systems of interest, enabling longer and more stable forecasts when operating with limited data. The technique is demonstrated in detail using the recurrent neural network architecture of reservoir computing. Results are given for the Lorenz 1996 chaotic dynamical system and a spectral quasi-geostrophic model, both typical test cases for numerical weather prediction. △ Less

Submitted 23 April, 2023; originally announced April 2023.

Heterogeneous integration of solid state quantum systems with a foundry photonics platform

Authors: Hao-Cheng Weng, Jorge Monroy-Ruz, Jonathan C. F. Matthews, John G. Rarity, Krishna C. Balram, Joe A. Smith

Abstract: Diamond colour centres are promising optically-addressable solid state spins that can be matter-qubits, mediate deterministic interaction between photons and act as single photon emitters. Useful quantum computers will comprise millions of logical qubits. To become useful in constructing quantum computers, spin-photon interfaces must therefore become scalable and be compatible with mass-manufactur… ▽ More Diamond colour centres are promising optically-addressable solid state spins that can be matter-qubits, mediate deterministic interaction between photons and act as single photon emitters. Useful quantum computers will comprise millions of logical qubits. To become useful in constructing quantum computers, spin-photon interfaces must therefore become scalable and be compatible with mass-manufacturable photonics and electronics. Here we demonstrate heterogeneous integration of NV centres in nanodiamond with low-fluorescence silicon nitride photonics from a standard 180 nm CMOS foundry process. Nanodiamonds are positioned over pre-defined sites in a regular array on a waveguide, in a single post-processing step. Using an array of optical fibres, we excite NV centres selectively from an array of six integrated nanodiamond sites, and collect the photoluminescence (PL) in each case into waveguide circuitry on-chip. We verify single photon emission by an on-chip Hanbury Brown and Twiss cross-correlation measurement, which is a key characterisation experiment otherwise typically performed routinely with discrete optics. Our work opens up a simple and effective route to simultaneously address large arrays of individual optically-active spins at scale, without requiring discrete bulk optical setups. This is enabled by the heterogeneous integration of NV centre nanodiamonds with CMOS photonics. △ Less

Submitted 20 April, 2023; originally announced April 2023.

Comments: 8 pages, 4 figures, and supplementary material

Journal ref: ACS Photonics 2023, 10, 9, 3302-3309

Voltage scanning and technical upgrades at the Collinear Resonance Ionization Spectroscopy experiment

Authors: Michail Athanasakis-Kaklamanakis, Jordan R. Reilly, Agota Koszorus, Shane G. Wilkins, Louis Lalanne, Sarina Geldhof, Miranda Nichols, Quanjun Wang, Bram van den Borne, David Chorlton, Thomas E. Cocolios, Kieran T. Flanagan, Ronald F. Garcia Ruiz, Ruben de Groote, Dag Hanstorp, Gerda Neyens, Andrew J. Smith, Adam R. Vernon, Xiaofei F. Yang

Abstract: To optimize the performance of the Collinear Resonance Ionization Spectroscopy (CRIS) experiment at CERN-ISOLDE, technical upgrades are continuously introduced, aiming to enhance its sensitivity, precision, stability, and efficiency. Recently, a voltage-scanning setup was developed and commissioned at CRIS, which improved the scanning speed by a factor of three as compared to the current laser-fre… ▽ More To optimize the performance of the Collinear Resonance Ionization Spectroscopy (CRIS) experiment at CERN-ISOLDE, technical upgrades are continuously introduced, aiming to enhance its sensitivity, precision, stability, and efficiency. Recently, a voltage-scanning setup was developed and commissioned at CRIS, which improved the scanning speed by a factor of three as compared to the current laser-frequency scanning approach. This leads to faster measurements of the hyperfine structure for systems with high yields (more than a few thousand ions per second). Additionally, several beamline sections have been redesigned and manufactured, including a new field-ionization unit, a sharper electrostatic bend, and improved ion optics. The beamline upgrades are expected to yield an improvement of at least a factor of 5 in the signal-to-noise ratio by suppressing the non-resonant laser ions and providing time-of-flight separation between the resonant ions and the collisional background. Overall, the presented developments will further improve the selectivity, sensitivity, and efficiency of the CRIS technique. △ Less

Submitted 20 March, 2023; originally announced March 2023.

Comments: 10 pages. Under review at NIM B as part of the proceedings of EMIS 2022 at RAON, South Korea

The human factor: results of a small-angle scattering data analysis Round Robin

Authors: Brian R. Pauw, Glen J. Smales, Andy S. Anker, Daniel M. Balazs, Frederick L. Beyer, Ralf Bienert, Wim G. Bouwman, Ingo Breßler, Joachim Breternitz, Erik S Brok, Gary Bryant, Andrew J. Clulow, Erin R. Crater, Frédéric De Geuser, Alessandra Del Giudice, Jérôme Deumer, Sabrina Disch, Shankar Dutt, Kilian Frank, Emiliano Fratini, Elliot P. Gilbert, Marc Benjamin Hahn, James Hallett, Max Hohenschutz, Martin Hollamby , et al. (24 additional authors not shown)

Abstract: A Round Robin study has been carried out to estimate the impact of the human element in small-angle scattering data analysis. Four corrected datasets were provided to participants ready for analysis. All datasets were measured on samples containing spherical scatterers, with two datasets in dilute dispersions, and two from powders. Most of the 46 participants correctly identified the number of pop… ▽ More A Round Robin study has been carried out to estimate the impact of the human element in small-angle scattering data analysis. Four corrected datasets were provided to participants ready for analysis. All datasets were measured on samples containing spherical scatterers, with two datasets in dilute dispersions, and two from powders. Most of the 46 participants correctly identified the number of populations in the dilute dispersions, with half of the population mean entries within 1.5% and half of the population width entries within 40%, respectively. Due to the added complexity of the structure factor, much fewer people submitted answers on the powder datasets. For those that did, half of the entries for the means and widths were within 44% and 86% respectively. This Round Robin experiment highlights several causes for the discrepancies, for which solutions are proposed. △ Less

Submitted 7 March, 2023; originally announced March 2023.

Comments: 23 pages, 10 figures. For the original information sent to RR participants, see https://zenodo.org/record/7506365 . For the anonymized results and Jupyter notebook for analysis, see https://zenodo.org/record/7509710

Symbiotic and antagonistic disease dynamics on networks using bond percolatio

Authors: Peter Mann, V. Anne Smith, John Mitchell, Simon Dobson

Abstract: In this paper we introduce a novel description of the equilibrium state of a bond percolation process on random graphs using the exact method of generating functions. This allows us to find the expected size of the giant connected component (GCC) of two sequential bond percolation processes in which the bond occupancy probability of the second process is modulated (increased or decreased) by a nod… ▽ More In this paper we introduce a novel description of the equilibrium state of a bond percolation process on random graphs using the exact method of generating functions. This allows us to find the expected size of the giant connected component (GCC) of two sequential bond percolation processes in which the bond occupancy probability of the second process is modulated (increased or decreased) by a node being inside or outside of the GCC created by the first process. In the context of epidemic spreading this amounts to both a antagonistic partial immunity or a synergistic partial coinfection interaction between the two sequential diseases. We examine configuration model networks with tunable clustering. We find that the emergent evolutionary behaviour of the second strain is highly dependent on the details of the coupling between the strains. Contact clustering generally reduces the outbreak size of the second strain relative to unclustered topologies; however, positive assortativity induced by clustered contacts inverts this conclusion for highly transmissible disease dynamics. △ Less

Submitted 19 January, 2023; originally announced January 2023.

Comments: 10 pages, 5 figures

Journal ref: Phys. Rev. E 104, 024303. 2021

Mesoscopic modelling of epithelial tissues

Authors: Kevin Höllring, Ana-Sunčana Smith

Abstract: Over the last two decades, scientific literature has been blooming with various means of simulating epithelial cell colonies. Each of these simulations can be separated by their respective efficiency (expressed in terms of consumed computational resources), the amount of cells/the size of tissues that can be simulated, the time scale of the simulated dynamics and the coarse grained level of precis… ▽ More Over the last two decades, scientific literature has been blooming with various means of simulating epithelial cell colonies. Each of these simulations can be separated by their respective efficiency (expressed in terms of consumed computational resources), the amount of cells/the size of tissues that can be simulated, the time scale of the simulated dynamics and the coarse grained level of precision. Choosing the right algorithm for the simulation of epithelial cells and tissues is a compromise between each of these key elements. Irrespective of the method, each algorithm includes part, or all, of the following features: short-range membrane-mediated attraction between cells, soft-core repulsion between cells, cell proliferation, cell death, cell motility, fluctuations, etc. We will first give a non-exhaustive overview of commonly used modeling approaches for tissues at a mesoscopic level, giving a rough idea of the coarse-graining decisions made for every one of them. Then we will dive into greater detail on how to implement a relaxation procedure according to the Vertex Model, refreshing aspects of the theoretical groundwork, describing required data structures and simulation steps and pointing out details of the simulation that can present pitfalls to a first-time implementation of the model. △ Less

Submitted 19 December, 2022; originally announced December 2022.

Comments: 16 pages, 6 figures, to be published in "Active Matter" edited by Giovanni Volpe, Nuno Araújo, Giorgio Volpe, Agnese Callegari

Anisotropic molecular diffusion in confinement I: Transport of small particles in potential and density gradients

Authors: Kevin Höllring, Andreas Baer, Nataša Vučemilović-Alagić, David M. Smith, Ana-Sunčana Smith

Abstract: Hypothesis: Diffusion in confinement is an important fundamental problem with significant implications for applications of supported liquid phases. However, resolving the spatially dependent diffusion coefficient, parallel and perpendicular to interfaces, has been a standing issue. In the vicinity of interfaces, density fluctuations as a consequence of layering locally impose statistical drift, wh… ▽ More Hypothesis: Diffusion in confinement is an important fundamental problem with significant implications for applications of supported liquid phases. However, resolving the spatially dependent diffusion coefficient, parallel and perpendicular to interfaces, has been a standing issue. In the vicinity of interfaces, density fluctuations as a consequence of layering locally impose statistical drift, which impedes the analysis of spatially dependent diffusion coefficients even further. We hypothesise, that we can derive a model to spatially resolve interface-perpendicular diffusion coefficients based on local lifetime statistics with an extension to explicitly account for the effect of local drift using the Smoluchowski equation, that allows us to resolve anisotropic and spatially dependent diffusivity landscapes at interfaces. Methods and simulations: An analytic relation between local crossing times in system slices and diffusivity as well as an explicit term for calculating drift-induced systematic errors is presented. The method is validated on Molecular Dynamics simulations of bulk water and applied to simulations of water in slit pores. Findings: After validation on bulk liquids, we clearly demonstrate the anisotropic nature of diffusion coefficients at interfaces. Significant spatial variations in the diffusivities correlate with interface-induced structuring but cannot be solely attributed to the drift induced by local density fluctuations. △ Less

Submitted 26 June, 2023; v1 submitted 19 December, 2022; originally announced December 2022.

Comments: 13 pages, 6 figures, submitted to JCIS, PDFLaTex; updated for submission to new Journal and split in two due to length; second accompanying publication: "Anisotropic molecular diffusion in confinement II: A model for structurally complex particles applied to transport in thin ionic liquid films" (both due to a split of arXiv:archive/2212.09545 )

Large Scale Integration of Graphene Transistors for Potential Applications in the Back End of the Line

Authors: A. D. Smith, S. Vaziri, S. Rodriguez, M. Östling, M. C. Lemme

Abstract: A chip to wafer scale, CMOS compatible method of graphene device fabrication has been established, which can be integrated into the back end of the line (BEOL) of conventional semiconductor process flows. In this paper, we present experimental results of graphene field effect transistors (GFETs) which were fabricated using this wafer scalable method. The carrier mobilities in these transistors rea… ▽ More A chip to wafer scale, CMOS compatible method of graphene device fabrication has been established, which can be integrated into the back end of the line (BEOL) of conventional semiconductor process flows. In this paper, we present experimental results of graphene field effect transistors (GFETs) which were fabricated using this wafer scalable method. The carrier mobilities in these transistors reach up to several hundred cm$^2$V$^{-1}$s$^{-1}$. Further, these devices exhibit current saturation regions similar to graphene devices fabricated using mechanical exfoliation. The overall performance of the GFETs can not yet compete with record values reported for devices based on mechanically exfoliated material. Nevertheless, this large scale approach is an important step towards reliability and variability studies as well as optimization of device aspects such as electrical contacts and dielectric interfaces with statistically relevant numbers of devices. It is also an important milestone towards introducing graphene into wafer scale process lines. △ Less

Submitted 22 November, 2022; originally announced November 2022.

Journal ref: Solid-State Electronics, 108, 61-66, 2015

Design of an Intake and a Thruster for an Atmosphere-Breathing Electric Propulsion System

Authors: F. Romano, G. Herdrich, Y. -A. Chan, N. H. Crisp, P. C. E. Roberts, B. E. A. Holmes, S. Edmondson, S. Haigh, A. Macario-Rojas, V. T. A. Oiko, L. A. Sinpetru K. Smith, J. Becedas, V. Sulliotti-Linner, M. Bisgaard, S. Christensen, V. Hanessian, T. Kauffman Jensen, J. Nielsen, S. Fasoulas, C. Traub, D. García-Almiñana, S. Rodríguez-Donaire, M. Sureda, D. Kataria, B. Belkouchi , et al. (3 additional authors not shown)

Abstract: Challenging space missions include those at very low altitudes, where the atmosphere is source of aerodynamic drag on the spacecraft that finally defines the missions lifetime unless way to compensate for it is provided. This environment is named Very Low Earth Orbit (VLEO) and is defined for $h<450~km$. In addition to the satellite's aerodynamic design, to extend the lifetime of such missions an… ▽ More Challenging space missions include those at very low altitudes, where the atmosphere is source of aerodynamic drag on the spacecraft that finally defines the missions lifetime unless way to compensate for it is provided. This environment is named Very Low Earth Orbit (VLEO) and is defined for $h<450~km$. In addition to the satellite's aerodynamic design, to extend the lifetime of such missions an efficient propulsion system is required. One solution is Atmosphere-Breathing Electric Propulsion (ABEP) that collects atmospheric particles to be used as propellant for an electric thruster. The system would minimize the requirement of limited propellant availability and can also be applied to any planetary body with atmosphere, enabling new missions at low altitude ranges for longer times. One of the objectives of the H2020 DISCOVERER project, is the development of an intake and an electrode-less plasma thruster for an ABEP system. The article describes the characteristics of intake design and the respective final deigns providing collection efficiencies up to $94\%$. On the other side, the radio frequency (RF) Helicon-based plasma thruster (IPT) developed at IRS, is hereby presented as well, while its performances are being evaluated, the thruster has been operated with single atmospheric species as propellant, and has highlighted very low input power requirement for operation at comparable mass flow rates $P\sim 60~W$. △ Less

Submitted 23 November, 2022; v1 submitted 18 November, 2022; originally announced November 2022.

Comments: arXiv admin note: substantial text overlap with arXiv:2106.15912

Journal ref: CEAS Space Journal 14, 707-715 (2022)

Ethylenediamine Addition Improves Performance and Suppresses Phase Instabilities in Mixed-Halide Perovskites

Authors: Margherita Taddei, Joel A. Smith, Benjamin M. Gallant, Suer Zhou, Robert J. E. Westbrook, Yangwei Shi, Jian Wang, James N. Drysdale, Declan P. McCarthy, Stephen Barlow, Seth R. Marder, Henry J. Snaith, David S. Ginger

Abstract: We show that adding ethylenediamine (EDA) to perovskite precursor solution improves the photovoltaic device performance and material stability of high-bromide-content, methylammonium-free, formamidinium cesium lead halide perovskites FA1-xCsxPb(I1-yBry)3 which are currently of interest for perovskite-on-Si tandem solar cells. Using spectroscopy and hyperspectral microscopy, we show that the additi… ▽ More We show that adding ethylenediamine (EDA) to perovskite precursor solution improves the photovoltaic device performance and material stability of high-bromide-content, methylammonium-free, formamidinium cesium lead halide perovskites FA1-xCsxPb(I1-yBry)3 which are currently of interest for perovskite-on-Si tandem solar cells. Using spectroscopy and hyperspectral microscopy, we show that the additive improves film homogeneity and suppresses the phase instability that is ubiquitous in high-Br perovskite formulations, producing films that remain stable for over 100 days in ambient conditions. With the addition of 1 mol% EDA we demonstrate 1.69 eV-gap perovskite single-junction p-i-n devices with a VOC of 1.22 V, and a champion maximum power point tracked power conversion efficiency of 18.8%, comparable to the best reported methylammonium-free perovskites. Using nuclear magnetic resonance (NMR) spectroscopy and X-ray diffraction techniques, we show that EDA reacts with FA+ in solution, rapidly and quantitatively forming imidazolinium cations. It is the presence of imidazolinium during crystallization which drives the improved perovskite thin-film properties. △ Less

Submitted 29 September, 2022; originally announced September 2022.

Enhanced Hong-Ou-Mandel Manifolds and figures of merit for linear chains of identical micro-ring resonators

Authors: Peter L. Kaulfuss, Paul M. Alsing, A. Matthew Smith, Joseph Monteleone III, Edwin E. Hach III

Abstract: We present an exact analytic expression for the Hong-Ou-Mandel (HOM) curve for any number of identical Micro-Ring Resonators (MRRs) in a linear chain. We investigate the extreme stability of this HOM curve, showing that the HOM effect in linear arrays of MRRs is highly robust. We further use this expression to derive three figures of merit for the HOM curve of linear chains of MRRs: the minimum ta… ▽ More We present an exact analytic expression for the Hong-Ou-Mandel (HOM) curve for any number of identical Micro-Ring Resonators (MRRs) in a linear chain. We investigate the extreme stability of this HOM curve, showing that the HOM effect in linear arrays of MRRs is highly robust. We further use this expression to derive three figures of merit for the HOM curve of linear chains of MRRs: the minimum tau value ($τ_{c}$), the curvature ($\barξ_N$), and the $5\%$ tolerance in tau ($δτ_{N}$). We promote these metrics to characterize the pros and cons of various linear chains of MRRs and inform design and fabrication. △ Less

Submitted 24 April, 2023; v1 submitted 29 September, 2022; originally announced September 2022.

Comments: 11 pages,5 figures, 1 table; accepted: Physical Review Research 24Apr2023

Journal ref: Phys. Rev. Research 5, 023097 (2023)

Predicting Swarm Equatorial Plasma Bubbles via Machine Learning and Shapley Values

Authors: S. A. Reddy, C. Forsyth, A. Aruliah, A. Smith, J. Bortnik, E. Aa, D. O. Kataria, G. Lewis

Abstract: In this study we present AI Prediction of Equatorial Plasma Bubbles (APE), a machine learning model that can accurately predict the Ionospheric Bubble Index (IBI) on the Swarm spacecraft. IBI is a correlation ($R^2$) between perturbations in plasma density and the magnetic field, whose source can be Equatorial Plasma Bubbles (EPBs). EPBs have been studied for a number of years, but their day-to-da… ▽ More In this study we present AI Prediction of Equatorial Plasma Bubbles (APE), a machine learning model that can accurately predict the Ionospheric Bubble Index (IBI) on the Swarm spacecraft. IBI is a correlation ($R^2$) between perturbations in plasma density and the magnetic field, whose source can be Equatorial Plasma Bubbles (EPBs). EPBs have been studied for a number of years, but their day-to-day variability has made predicting them a considerable challenge. We build an ensemble machine learning model to predict IBI. We use data from 2014-22 at a resolution of 1sec, and transform it from a time-series into a 6-dimensional space with a corresponding EPB $R^2$ (0-1) acting as the label. APE performs well across all metrics, exhibiting a skill, association and root mean squared error score of 0.96, 0.98 and 0.08 respectively. The model performs best post-sunset, in the American/Atlantic sector, around the equinoxes, and when solar activity is high. This is promising because EPBs are most likely to occur during these periods. Shapley values reveal that F10.7 is the most important feature in driving the predictions, whereas latitude is the least. The analysis also examines the relationship between the features, which reveals new insights into EPB climatology. Finally, the selection of the features means that APE could be expanded to forecasting EPBs following additional investigations into their onset. △ Less

Submitted 30 September, 2023; v1 submitted 27 September, 2022; originally announced September 2022.

Comments: 13 Pages, 9 Figures

Journal ref: Journal of Geophysical Research: Space Physics (2023): e2022JA031183