-
Pre-oligomerisation stochastic dynamics of prions driven by water molecules
Authors:
Mairembam Kelvin Singh,
R. K. Brojen Singh,
Moirangthem Shubhakanta Singh
Abstract:
Prions are proteinaceous infectious particles that cause neurodegenerative diseases in humans and animals. The complex nature of prions, with respect to their conformations and aggregations, has been an important area of research for quite some time. Here, we develop a model of prion dynamics prior to the formation of oligomers and subsequent development of prion diseases within a stochastic frame…
▽ More
Prions are proteinaceous infectious particles that cause neurodegenerative diseases in humans and animals. The complex nature of prions, with respect to their conformations and aggregations, has been an important area of research for quite some time. Here, we develop a model of prion dynamics prior to the formation of oligomers and subsequent development of prion diseases within a stochastic framework, based on the analytical Master Equation and Stochastic Simulation Algorithm by Gillespie. The results that we obtain shows that solvent water molecules act as driving agents in the dynamics of prion aggregation. Further, it is found that aggregated and non-aggregated proteins tend to co-exist in an equilibrium state, depending upon the reaction rate constants. These results may provide a theoretical and qualitative contexts of possible therapeutic strategies in the treatment of prion diseases.
△ Less
Submitted 23 July, 2024;
originally announced July 2024.
-
A gel wax phantom for performance evaluation in diagnostic ultrasound: assessment of image uniformity, geometric accuracy, and diameter of a hyperechoic target
Authors:
Debjani Phani,
Rajasekhar Konduru Varadarajulu,
Arijit Paramanick,
Souradip Paul,
Raghukumar Paramu,
George Zacharia,
Shaiju VS,
Venugopal Muraleedharan,
M. Suheshkumar Singh,
Raghuram Kesavan Nair
Abstract:
Purpose: To develop and validate a phantom for diagnostic ultrasound (US) scanners by embedding targets in gel wax to determine the image uniformity, lateral and axial resolution, and diameter of a stainless-steel disc. Materials and Methods: Acoustic property (AP), which includes the velocity of US (cus), acoustic impedance (Z), and attenuation coefficient in gel wax were determined. The cus, and…
▽ More
Purpose: To develop and validate a phantom for diagnostic ultrasound (US) scanners by embedding targets in gel wax to determine the image uniformity, lateral and axial resolution, and diameter of a stainless-steel disc. Materials and Methods: Acoustic property (AP), which includes the velocity of US (cus), acoustic impedance (Z), and attenuation coefficient in gel wax were determined. The cus, and attenuation coefficient were estimated using the pulse-echo technique. Z was obtained from the product of sample density (\r{ho}) and cus. Two rectangular frames using polytetrafluoroethylene (PTFE) sheets with holes separated by 5, 10, and 20 mm distances were constructed. Nylon filaments and SS-disc (diameter = 16.8 mm) were threaded through the frames and suitably placed in melted gel wax to obtain orthogonal targets. The targets were measured using computerized tomography (CT) and a 2-9 MHz US probe. Results: The AP of gel wax were cus=1418 m/s, \r{ho}= 0.87 g/cm3, Z=1.23 MRayls, attenuation coefficient= 0.88 dB/cm/MHz. The results of US imaging of the targets were compared with their physical sizes and served as baselines for the scanner and probe. The maximum error in distance measurement in the phantom US images was 7.1%, and the phantom volume decreased by 1.8% over 62 weeks. Conclusion: Gel wax can be useful in developing affordable, highly stable, and customizable diagnostic US phantoms that can be implemented widely.
△ Less
Submitted 14 December, 2022;
originally announced December 2022.
-
Photoacoustic Image Quality Improvement from a Single Cell Low Frequency PMUT
Authors:
Kaustav Roy,
Arijit Paramanik,
Souradip Paul,
Akshay Kalyan,
Eshani Sarkar,
Anuj Ashok,
Rudra Pratap,
M Suheshkumar Singh
Abstract:
Photoacoustic image (PAI) quality improvement using a low frequency piezoelectric micromachined ultrasound transducer (PMUT) having the fundamental resonant frequency 1 MHz is being reported. Specifically, three different methods are implemented such as the frame averaging, mathematically improved algorithms, and a hardware position accurate arrangement in order to obtain unparallel PAI image qual…
▽ More
Photoacoustic image (PAI) quality improvement using a low frequency piezoelectric micromachined ultrasound transducer (PMUT) having the fundamental resonant frequency 1 MHz is being reported. Specifically, three different methods are implemented such as the frame averaging, mathematically improved algorithms, and a hardware position accurate arrangement in order to obtain unparallel PAI image quality. Validation study has been conducted in both agar phantom and ex-vivo tissue samples. Measurable image quantifiers in the form of full width at half maximum (FWHM), signal to noise ratio (SNR), and contrast ratio (CR) are used to evaluate the improvement in the image quality. It is found that the FWHM increases by 34%, SNR by 23% and CR by 25%, suggesting the efficacy of the methods to achieve better photoacoustic images employing PMUT-based detector. The study demonstrates that the suggested methods of improvement could play a key role in a promising cost-effective PMUT-PAI system in future.
△ Less
Submitted 30 November, 2022;
originally announced November 2022.
-
Evolution of language driven by social dynamics
Authors:
Moirangthem Shubhakanta Singh,
R. K. Brojen Singh
Abstract:
The survival of endangered languages in complex language competition depends on socio-cultural status and honour endowed (by itself and by the other) among them. The restriction in the endorsement of this honour leads to language extinction of one language, and rise of the other. Endorsing proper mutual honour each other trigger the co-existence of language speakers and can save both languages fro…
▽ More
The survival of endangered languages in complex language competition depends on socio-cultural status and honour endowed (by itself and by the other) among them. The restriction in the endorsement of this honour leads to language extinction of one language, and rise of the other. Endorsing proper mutual honour each other trigger the co-existence of language speakers and can save both languages from extinction. The lost of respect to each other drives the death of both languages. We found a minimal or critical mutual honour (a=0.9635) which protects the two languages from extinction. The increase in mutual honour from this minimal value allows increase in the populations of the two languages speakers. The state of co-existence of competing languages abolishes the concept of minority and majority in language competition which can be obtained by mutual honour. Further, excess biased honour to a particular language (minority or majority) force the language to extinct. In mean-field approximation of language competition, magnetization parameter can be taken as an indicator of survival of a language.
△ Less
Submitted 5 May, 2022;
originally announced May 2022.
-
Higher-order correlation based real-time beamforming in photoacoustic imaging
Authors:
Sufayan Mulani,
Souradip Paul,
Mayanglambam Suheshkumar Singh
Abstract:
Linear-array based photoacoustic images are reconstructed using the conventional delay-and-sum (DAS) beamforming method. Although the DAS beamformer is well suited for PA image formation, reconstructed images are often afflicted by noises, sidelobes, and other intense artifacts due to inaccurate assumptions of PA signal correlation. The work aims to develop an inversion method that reduces the occ…
▽ More
Linear-array based photoacoustic images are reconstructed using the conventional delay-and-sum (DAS) beamforming method. Although the DAS beamformer is well suited for PA image formation, reconstructed images are often afflicted by noises, sidelobes, and other intense artifacts due to inaccurate assumptions of PA signal correlation. The work aims to develop an inversion method that reduces the occurrence of sidelobes and artifacts and improves image quality performance. We present a novel beamformer based on higher-order signal correlation, where more number of delayed PA signals are combined and summed up than the conventional delay-multiply-and-sum (DMAS). The proposed technique provides efficient improvements in resolution, contrast, and SNR compared to the traditional beamformers. Computational complexity in this method is shrunk to the same order of DAS $O(N)$. Therefore, this beamformer can be implemented in real-time PA image reconstruction. A GPU based study was performed on computation time. Proposed method almost executes in the same time frame of DAS and real-time DMAS. A validation study of the algorithm was accomplished both numerically and experimentally. Higher-order DMAS beamformers demonstrate superior reconstruction in all cases. The quantitative evaluation of the ex-vivo phantom shows that the proposed method leads to 51% and 6% improvement in FWHM, 81% and 39% improvement in SNR compared to DAS and DMAS, respectively. Conclusively, the proposed algorithm is very much potential and promising in real-time photoacoustic imaging and its applications.
△ Less
Submitted 28 March, 2022;
originally announced March 2022.
-
The climate system and the second law of thermodynamics
Authors:
Martin S. Singh,
Morgan E O'Neill
Abstract:
The second law of thermodynamics implies a relationship between the net entropy export by the Earth and its internal irreversible entropy production. The application of this constraint for the purpose of understanding Earth's climate is reviewed. Both radiative processes and material processes are responsible for irreversible entropy production in the climate system. Focusing on material processes…
▽ More
The second law of thermodynamics implies a relationship between the net entropy export by the Earth and its internal irreversible entropy production. The application of this constraint for the purpose of understanding Earth's climate is reviewed. Both radiative processes and material processes are responsible for irreversible entropy production in the climate system. Focusing on material processes, an entropy budget for the climate system is derived which accounts for the multi-phase nature of the hydrological cycle. The entropy budget facilitates a heat-engine perspective of atmospheric circulations that has been used to propose theories for convective updraft velocities, tropical cyclone intensity, and the atmospheric meridional heat transport. Such theories can only be successful, however, if they properly account for the irreversible entropy production associated with water in all its phases in the atmosphere. Irreversibility associated with such moist processes is particularly important in the context of global climate change, for which the concentration of water vapor in the atmosphere is expected to increase, and recent developments toward understanding the response of the atmospheric heat engine to climate change are discussed. Finally, the application of variational approaches to the climate and geophysical flows is briefly reviewed, including the use of equilibrium statistical mechanics to predict behavior of long-lived coherent structures, and the controversial maximum entropy production principle.
△ Less
Submitted 17 January, 2022; v1 submitted 2 February, 2021;
originally announced February 2021.
-
Noise adaptive beamforming for linear array photoacoustic imaging
Authors:
Souradip Paul,
Subhamoy Mandal,
Mayanglambam Suheshkumar Singh
Abstract:
Delay-and-sum (DAS) algorithms are widely used for beamforming in linear array photoacoustic imaging systems and are characterized by fast execution. However, these algorithms suffer from various drawbacks like low resolution, low contrast, high sidelobe artifacts and lack of visual coherence. More recently, adaptive weighting was introduced to improve the reconstruction image quality. Unfortunate…
▽ More
Delay-and-sum (DAS) algorithms are widely used for beamforming in linear array photoacoustic imaging systems and are characterized by fast execution. However, these algorithms suffer from various drawbacks like low resolution, low contrast, high sidelobe artifacts and lack of visual coherence. More recently, adaptive weighting was introduced to improve the reconstruction image quality. Unfortunately, the existing state-of-the-art adaptive beamforming algorithms are computationally expensive and do not consider the specific noise characteristics of the acquired ultrasonic signal. In this article, we present a new adaptive weighting factor named the variational coherence factor (VCF), which takes into account the noise level variations of radio-frequency data. The proposed technique provides superior results in terms of image resolution, sidelobe reduction, signal-to-noise and contrast level improvement. The quantitative results of the numerical simulations and phantom imaging show that the proposed VCF assisted DAS method leads to 55% and 25% improvement in FWHM, 57% and 32% improvement in SNR, respectively, compared to the state-of-the-art DAS-based methods. The results demonstrate that the proposed method can effectively improve the reconstructed image quality and deliver satisfactory imaging performance even with a limited number of sensor elements. The proposed method can potentially reduce the instrumentation cost of the photoacoustic imaging system and contribute toward the clinical translation of the modality.
△ Less
Submitted 27 July, 2021; v1 submitted 16 November, 2020;
originally announced November 2020.
-
Acoustic and Ultrasonographic Characterization of Neoprene, Beeswax, and Carbomer-Gel to Mimic Soft-tissue for Ultrasound
Authors:
Debjani Phani,
Rajasekhar K. V.,
Anjali Thomas,
Raghukumar Paramu,
M. Suheshkumar Singh,
Shaiju V. S.,
Venugopal Muraleedharan,
R. K. Nair
Abstract:
Materials with acoustic quantities similar to soft-tissue are essential as tissue-mimicking materials for diagnostic ultrasound (US). Acoustic quantity consists of the sound velocity (cus), acoustic impedance (AI) and attenuation coefficient. In this work, the acoustic quantities of neoprene rubber, beeswax, and Carbomer-gel were determined. The cus and attenuation coefficient were estimated using…
▽ More
Materials with acoustic quantities similar to soft-tissue are essential as tissue-mimicking materials for diagnostic ultrasound (US). Acoustic quantity consists of the sound velocity (cus), acoustic impedance (AI) and attenuation coefficient. In this work, the acoustic quantities of neoprene rubber, beeswax, and Carbomer-gel were determined. The cus and attenuation coefficient were estimated using the pulse-echo technique. The AI was calculated from the product of density and cus. Results were compared with a benchmark based on the International Commission on Radiation Units and Measurements Report-61, Tissue Substitutes, Phantoms and Computational Modelling in Medical Ultrasound. The acceptance criteria were 1.043 g/cm3 (density), 1561 m/s (cus), 1.63 MRayls (AI) and attenuation coefficients within 0.5-0.7 dB/cm/MHz. Computerized tomography (CT) and US images of specimens were obtained to compare with respective images of the human liver (a clinical soft-tissue), to evaluate the similarities in image contrast and echogenicity. Results of neoprene and beeswax were unsatisfactory.However, the acoustic quantities of Carbomer-gel (density 1.03 g/cm3, cus 1567 m/s, and AI 1.61 MRayls, and attenuation coefficient 0.6 dB/cm/MHz) were satisfactory within 2%. Carbomer-gel images could efficiently mimic the contrast and echogenicity of liver images. The uncertainties in cus measurements were 0.36 %, 0.11 % and 0.28 % for neoprene-50, beeswax and C-gel respectively. The attenuation coefficients had uncertainties 4.2 %, 1.9 %, and 2.6 % in these samples. The results of Carbomer-gel could resemble soft-tissue for US. It contains 95 % water, is effortless to prepare, and can support in developing a low-cost phantom for periodic performance evaluation of US scanners and contribute to patient care.
△ Less
Submitted 11 April, 2020;
originally announced April 2020.
