Showing 1–50 of 153 results for author: Singh, J

Spatial and Temporal Evaluations of the Liquid Argon Purity in ProtoDUNE-SP

Authors: DUNE Collaboration, S. Abbaslu, A. Abed Abud, R. Acciarri, L. P. Accorsi, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, C. Adriano, F. Akbar, F. Alemanno, N. S. Alex, K. Allison, M. Alrashed, A. Alton, R. Alvarez, T. Alves, A. Aman, H. Amar, P. Amedo, J. Anderson, D. A. Andrade, C. Andreopoulos, M. Andreotti , et al. (1301 additional authors not shown)

Abstract: Liquid argon time projection chambers (LArTPCs) rely on highly pure argon to ensure that ionization electrons produced by charged particles reach readout arrays. ProtoDUNE Single-Phase (ProtoDUNE-SP) was an approximately 700-ton liquid argon detector intended to prototype the Deep Underground Neutrino Experiment (DUNE) Far Detector Horizontal Drift module. It contains two drift volumes bisected by… ▽ More Liquid argon time projection chambers (LArTPCs) rely on highly pure argon to ensure that ionization electrons produced by charged particles reach readout arrays. ProtoDUNE Single-Phase (ProtoDUNE-SP) was an approximately 700-ton liquid argon detector intended to prototype the Deep Underground Neutrino Experiment (DUNE) Far Detector Horizontal Drift module. It contains two drift volumes bisected by the cathode plane assembly, which is biased to create an almost uniform electric field in both volumes. The DUNE Far Detector modules must have robust cryogenic systems capable of filtering argon and supplying the TPC with clean liquid. This paper will explore comparisons of the argon purity measured by the purity monitors with those measured using muons in the TPC from October 2018 to November 2018. A new method is introduced to measure the liquid argon purity in the TPC using muons crossing both drift volumes of ProtoDUNE-SP. For extended periods on the timescale of weeks, the drift electron lifetime was measured to be above 30 ms using both systems. A particular focus will be placed on the measured purity of argon as a function of position in the detector. △ Less

Submitted 11 July, 2025; originally announced July 2025.

Report number: CERN-EP-2025-157, FERMILAB-PUB-25-0445-V

Physisorption on Nanomechanical Resonators: The Overlooked Influence of Trace Moisture

Authors: Hemant Kumar Verma, Suman Kumar Mandal, Darkasha Khan, Faizan Tariq Beigh, Manoj Kandpal, Jaspreet Singh, Sushobhan Avasthi, Srinivasan Raghavan, Akshay Naik

Abstract: Short gas pulses introduced in a vacuum chamber have long been utilized to showcase the ultra-low mass resolutions achievable with nanomechanical resonators. The resonance frequency shifts are used as evidence of gas adsorption. However, there is very little clarity as to what exactly is adsorbing on to the resonators. We demonstrate that the physisorption of gases on cantilevers is predominantly… ▽ More Short gas pulses introduced in a vacuum chamber have long been utilized to showcase the ultra-low mass resolutions achievable with nanomechanical resonators. The resonance frequency shifts are used as evidence of gas adsorption. However, there is very little clarity as to what exactly is adsorbing on to the resonators. We demonstrate that the physisorption of gases on cantilevers is predominantly the effect of moisture content that is present even in ultra-high purity gases. The experimental work is performed at low temperatures and in a high vacuum and is supported by theoretical calculations and simulation. △ Less

Submitted 20 June, 2025; originally announced June 2025.

Phase-shifting structured illumination with polarization-encoded metasurface

Authors: Linzhi Yu, Jesse Pietila, Haobijam Johnson Singh, Humeyra Caglayan

Abstract: Phase-shifting structured illumination is a powerful technique used across diverse imaging modalities, including 3D surface measurement, quantitative phase imaging, and super-resolution microscopy. However, conventional implementations often rely on mechanically driven or optoelectronically complex systems, limiting their compactness, stability, and integration. Here, we present a polarization-con… ▽ More Phase-shifting structured illumination is a powerful technique used across diverse imaging modalities, including 3D surface measurement, quantitative phase imaging, and super-resolution microscopy. However, conventional implementations often rely on mechanically driven or optoelectronically complex systems, limiting their compactness, stability, and integration. Here, we present a polarization-controlled dielectric metasurface that generates phase-shifting fringe patterns in the visible spectrum, enabling compact and robust structured light projection. The metasurface encodes distinct phase gratings for orthogonal polarizations, producing fringe patterns with relative lateral displacements that vary according to the polarization of the transmitted light. We experimentally demonstrate high-quality fringe generation and apply the structured illumination in a fringe projection profilometry system for 3D surface measurement of different objects. The metasurface integrates multiple phase-shifting steps into a single static device, offering a millimeter-scale footprint and compatibility with polarization multiplexing. This approach introduces a compact, passive solution for structured light generation with broad potential in next-generation optical metrology and advanced computational imaging. △ Less

Submitted 2 May, 2025; originally announced May 2025.

European Contributions to Fermilab Accelerator Upgrades and Facilities for the DUNE Experiment

Authors: DUNE Collaboration, A. Abed Abud, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, F. Akbar, F. Alemanno, N. S. Alex, K. Allison, M. Alrashed, A. Alton, R. Alvarez, T. Alves, A. Aman, H. Amar, P. Amedo, J. Anderson, D. A. Andrade , et al. (1322 additional authors not shown)

Abstract: The Proton Improvement Plan (PIP-II) to the FNAL accelerator chain and the Long-Baseline Neutrino Facility (LBNF) will provide the world's most intense neutrino beam to the Deep Underground Neutrino Experiment (DUNE) enabling a wide-ranging physics program. This document outlines the significant contributions made by European national laboratories and institutes towards realizing the first phase o… ▽ More The Proton Improvement Plan (PIP-II) to the FNAL accelerator chain and the Long-Baseline Neutrino Facility (LBNF) will provide the world's most intense neutrino beam to the Deep Underground Neutrino Experiment (DUNE) enabling a wide-ranging physics program. This document outlines the significant contributions made by European national laboratories and institutes towards realizing the first phase of the project with a 1.2 MW neutrino beam. Construction of this first phase is well underway. For DUNE Phase II, this will be closely followed by an upgrade of the beam power to > 2 MW, for which the European groups again have a key role and which will require the continued support of the European community for machine aspects of neutrino physics. Beyond the neutrino beam aspects, LBNF is also responsible for providing unique infrastructure to install and operate the DUNE neutrino detectors at FNAL and at the Sanford Underground Research Facility (SURF). The cryostats for the first two Liquid Argon Time Projection Chamber detector modules at SURF, a contribution of CERN to LBNF, are central to the success of the ongoing execution of DUNE Phase I. Likewise, successful and timely procurement of cryostats for two additional detector modules at SURF will be critical to the success of DUNE Phase II and the overall physics program. The DUNE Collaboration is submitting four main contributions to the 2026 Update of the European Strategy for Particle Physics process. This paper is being submitted to the 'Accelerator technologies' and 'Projects and Large Experiments' streams. Additional inputs related to the DUNE science program, DUNE detector technologies and R&D, and DUNE software and computing, are also being submitted to other streams. △ Less

Submitted 31 March, 2025; originally announced March 2025.

Comments: Submitted to the 2026 Update of the European Strategy for Particle Physics

DUNE Software and Computing Research and Development

Authors: DUNE Collaboration, A. Abed Abud, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, F. Akbar, F. Alemanno, N. S. Alex, K. Allison, M. Alrashed, A. Alton, R. Alvarez, T. Alves, A. Aman, H. Amar, P. Amedo, J. Anderson, D. A. Andrade , et al. (1322 additional authors not shown)

Abstract: The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy toward the implementation of this leading-edge, large-scale science project. The ambitious physics program of Phase I and Phase II of DUNE is dependent upon deployment and utilization of significant computing res… ▽ More The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy toward the implementation of this leading-edge, large-scale science project. The ambitious physics program of Phase I and Phase II of DUNE is dependent upon deployment and utilization of significant computing resources, and successful research and development of software (both infrastructure and algorithmic) in order to achieve these scientific goals. This submission discusses the computing resources projections, infrastructure support, and software development needed for DUNE during the coming decades as an input to the European Strategy for Particle Physics Update for 2026. The DUNE collaboration is submitting four main contributions to the 2026 Update of the European Strategy for Particle Physics process. This submission to the 'Computing' stream focuses on DUNE software and computing. Additional inputs related to the DUNE science program, DUNE detector technologies and R&D, and European contributions to Fermilab accelerator upgrades and facilities for the DUNE experiment, are also being submitted to other streams. △ Less

Submitted 31 March, 2025; originally announced March 2025.

Comments: Submitted to the 2026 Update of the European Strategy for Particle Physics

The DUNE Phase II Detectors

Authors: DUNE Collaboration, A. Abed Abud, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, F. Akbar, F. Alemanno, N. S. Alex, K. Allison, M. Alrashed, A. Alton, R. Alvarez, T. Alves, A. Aman, H. Amar, P. Amedo, J. Anderson, D. A. Andrade , et al. (1322 additional authors not shown)

Abstract: The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy for the implementation of this leading-edge, large-scale science project. The 2023 report of the US Particle Physics Project Prioritization Panel (P5) reaffirmed this vision and strongly endorsed DUNE Phase I and… ▽ More The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy for the implementation of this leading-edge, large-scale science project. The 2023 report of the US Particle Physics Project Prioritization Panel (P5) reaffirmed this vision and strongly endorsed DUNE Phase I and Phase II, as did the previous European Strategy for Particle Physics. The construction of DUNE Phase I is well underway. DUNE Phase II consists of a third and fourth far detector module, an upgraded near detector complex, and an enhanced > 2 MW beam. The fourth FD module is conceived as a 'Module of Opportunity', aimed at supporting the core DUNE science program while also expanding the physics opportunities with more advanced technologies. The DUNE collaboration is submitting four main contributions to the 2026 Update of the European Strategy for Particle Physics process. This submission to the 'Detector instrumentation' stream focuses on technologies and R&D for the DUNE Phase II detectors. Additional inputs related to the DUNE science program, DUNE software and computing, and European contributions to Fermilab accelerator upgrades and facilities for the DUNE experiment, are also being submitted to other streams. △ Less

Submitted 29 March, 2025; originally announced March 2025.

Comments: Submitted to the 2026 Update of the European Strategy for Particle Physics

Meta-operators for all-optical image processing

Authors: Linzhi Yu, Haobijam J. Singh, Jesse Pietila, Humeyra Caglayan

Abstract: All-optical image processing offers a high-speed, energy-efficient alternative to conventional electronic systems by leveraging the wave nature of light for parallel computation. However, traditional optical processors rely on bulky components, limiting scalability and integration. Here, we demonstrate a compact metasurface-based platform for analog optical computing. By employing double-phase enc… ▽ More All-optical image processing offers a high-speed, energy-efficient alternative to conventional electronic systems by leveraging the wave nature of light for parallel computation. However, traditional optical processors rely on bulky components, limiting scalability and integration. Here, we demonstrate a compact metasurface-based platform for analog optical computing. By employing double-phase encoding and polarization multiplexing, our approach enables arbitrary image transformations within a single passive nanophotonic device, eliminating the need for complex optical setups or digital post-processing. We experimentally showcase key computational operations, including first-order differentiation, cross-correlation, vertex detection, and Laplacian differentiation. Additionally, we extend this framework to high-resolution 3D holography, achieving subwavelength-scale volumetric wavefront control for depth-resolved reconstructions with high fidelity. Our results establish a scalable and versatile approach to computational optics, with applications including real-time image processing, energy-efficient computing, biomedical imaging, high-fidelity holographic displays, and optical data storage, driving the advancement of intelligent optical processors. △ Less

Submitted 15 March, 2025; originally announced March 2025.

The Role of Dark States on Azopyrrole Photoisomerization Reaction by Varying the Coupling Strength of Light-Matter Interaction

Authors: Pallavi Garg, Jaibir Singh, Ankit Kumar Gaur, Sugumar Venkataramani, Christian Schäfer, Jino George

Abstract: Strong light-matter interactions are gaining importance in controlling the photoswitching behavior of molecules exhibiting bistability. Here, we used the strategy of electronic strong coupling of both the E and Z-isomers of azopyrrole photoswitches to a single cavity mode, thereby tuning the conditions from strong to weak coupling in an on-the-go photoisomerization process. This allows in situ mon… ▽ More Strong light-matter interactions are gaining importance in controlling the photoswitching behavior of molecules exhibiting bistability. Here, we used the strategy of electronic strong coupling of both the E and Z-isomers of azopyrrole photoswitches to a single cavity mode, thereby tuning the conditions from strong to weak coupling in an on-the-go photoisomerization process. This allows in situ monitoring of apparent rates of forward and backward reactions. Very interestingly, the kinetics follow a non-linear trend with a sharp switch in the kinetic slope at the intermediate coupling regime. At this condition, pumping at the upper polaritonic state and the uncoupled population shows an acceleration of the photoisomerization process mediated by the dark state manifold. On the other hand, an opposite effect is observed while exciting the lower polaritonic state. Performing the same experiment in the ultra-strong coupling regime shows no dynamic change over time but further emphasizes the outstanding role of the lower polaritonic states. Our experimental and theoretical findings underline the importance of collective strong coupling in tailoring energy transfer to control photoisomerization dynamically. △ Less

Submitted 15 March, 2025; originally announced March 2025.

Multifunctional meta-optic azimuthal shear interferometer

Authors: Linzhi Yu, Sergei Shevtsov, Haobijam Johnson Singh, Peter G. Kazansky, Humeyra Caglayan

Abstract: Azimuthal shear interferometry is a versatile tool for analyzing wavefront asymmetries. However, conventional systems are bulky, alignment-sensitive, and prone to nonuniform shear. We present a broadband, compact, and robust meta-optics-based azimuthal shear interferometer in a common-path configuration, reducing the system size to the millimeter scale. Unlike conventional designs, the meta-optic… ▽ More Azimuthal shear interferometry is a versatile tool for analyzing wavefront asymmetries. However, conventional systems are bulky, alignment-sensitive, and prone to nonuniform shear. We present a broadband, compact, and robust meta-optics-based azimuthal shear interferometer in a common-path configuration, reducing the system size to the millimeter scale. Unlike conventional designs, the meta-optic azimuthal shear interferometer utilizes the localized wavefront modulation capabilities of meta-optics to achieve uniform azimuthal shear displacement independent of radial position, significantly enhancing accuracy and stability. Our approach eliminates the need for bulky optical components and precise multi-path alignment, making it more resilient to environmental disturbances. Its multifunctionality is demonstrated through applications in all-optical edge detection, differential interference contrast microscopy, and aberrated wavefront sensing. These results underscore its potential for real-time analog image processing, advanced optical imaging, and optical testing. △ Less

Submitted 8 February, 2025; originally announced February 2025.

Journal ref: Nanoletters 2025

Increasing risk of oppressive heatwaves over India in the future warming

Authors: Naveen Sudharsan, Jitendra Singh, Subimal Ghosh, Subhankar Karmakar

Abstract: This study examines the increasing frequency of heatwaves, particularly focusing on extreme (high temperature, low humidity) and oppressive (high temperature, high humidity) heatwaves, and their impacts on human mortality. We find that both types of heatwaves are increasing, with oppressive heatwaves showing a faster rate of growth. Importantly, oppressive heatwaves are more strongly correlated wi… ▽ More This study examines the increasing frequency of heatwaves, particularly focusing on extreme (high temperature, low humidity) and oppressive (high temperature, high humidity) heatwaves, and their impacts on human mortality. We find that both types of heatwaves are increasing, with oppressive heatwaves showing a faster rate of growth. Importantly, oppressive heatwaves are more strongly correlated with heat-stress-related human deaths than extreme heatwaves, indicating they pose a greater health risk. Using climate model simulations, we project a significant increase in the number of oppressive heatwave days under future warming scenarios. Under 1.5°C global warming, oppressive heatwaves will increase five-fold by the end of the century (2070-2100), relative to the historical period (1975-2005). Under 2°C warming, this increase rises to eight-fold, with an almost two-fold increase in oppressive heatwaves compared to the 1.5°C scenario. Extreme heatwave days, in contrast, remain relatively constant. Limiting warming to 1.5°C could reduce the likelihood of oppressive and extreme heatwaves by 44% and 25%, respectively, compared to a 2°C warming world. These findings highlight the urgent need for adaptation strategies, particularly in densely populated regions, to mitigate the health risks of rising heatwave intensity and frequency. △ Less

Submitted 22 January, 2025; originally announced January 2025.

High-pressure growth effect on the properties of high-Tc iron-based superconductors: A short review

Authors: Priya Singh, Manasa Manasa, Mohammad Azam, Shiv J. Singh

Abstract: The high-pressure growth technique is a vital approach that facilitates the stabilization of new phases and allows for meticulous control of structural parameters, which significantly impact electronic and magnetic properties. We present a short review of our ongoing investigations into various families of iron-based superconductors (IBS), employing the high-gas pressure and high-temperature synth… ▽ More The high-pressure growth technique is a vital approach that facilitates the stabilization of new phases and allows for meticulous control of structural parameters, which significantly impact electronic and magnetic properties. We present a short review of our ongoing investigations into various families of iron-based superconductors (IBS), employing the high-gas pressure and high-temperature synthesis (HP-HTS) method. This technique is capable of producing the gas pressures up to 1.8 GPa and a heating temperature of up to 1700 °C through a three-zone furnace within a cylindrical chamber. Different kinds of IBS samples are prepared using HPHTS and characterized through various measurements to reach the final conclusions. The results demonstrate that the high-pressure growth technique significantly enhances the properties of IBS, including the transition temperature, critical current density, and pinning force. In addition, the quality of the samples and their density are improved through the intergrain connections. Furthermore, the comprehensive evaluations and investigations prove that a growth pressure of 0.5 GPa is sufficient for producing high-quality IBS bulks under the optimized synthesis conditions. △ Less

Submitted 11 January, 2025; originally announced January 2025.

Comments: 21 pages, 4 figures, 1 table

Journal ref: Cryogenics Journal (2025)

High-pressure growth effects on the superconducting properties of Sm-based oxypnictide superconductors

Authors: Mohammad Azam, Manasa Manasa, Tatiana Zajarniuk, Ryszard Diduszko, Taras Palasyuk, Tomasz Cetner, Andrzej Morawski, Cezariusz Jastrzębski, Andrzej Szewczyk, Michał Wierzbicki, Shiv J. Singh

Abstract: High-pressure synthesis can be an effective method for improving the sample quality of materials as well as their superconducting properties. In this paper, the synthesis process of F- doped SmFeAsO has been optimized by preparing a series of bulk SmFeAsO0.8F0.2 (Sm1111) using the high gas pressure and high-temperature synthesis (HP-HTS) method, considering various growth parameters like growth pr… ▽ More High-pressure synthesis can be an effective method for improving the sample quality of materials as well as their superconducting properties. In this paper, the synthesis process of F- doped SmFeAsO has been optimized by preparing a series of bulk SmFeAsO0.8F0.2 (Sm1111) using the high gas pressure and high-temperature synthesis (HP-HTS) method, considering various growth parameters like growth pressures (0-1 GPa) and heating time (0.5-2 h). Structural, microstructural, Raman spectroscopic, transport, and magnetic measurements are employed to comprehensively analyze these bulks and derive the conclusive findings. The parent SmFeAsO0.8F0.2 prepared by the conventional synthesis process at ambient pressure (CSP) has a transition temperature (Tc) of around 53-54 K, and the critical current density (Jc) of 103 A/cm2 at 5 K with a small amount of the impurity phases (SmOF and SmAs), consistent with previous reports. Interestingly, all bulks synthesized by HP-HTS have almost the same Tc and Jc as the parent sample. The optimal growth conditions are obtained as 900C, 1 hour, and 0.5 GPa with the sealed Ta-tube, which slightly improved the sample quality and the superconducting properties compared to other bulks grown by HP-HTS. Our study confirms that the existence of the impurity phases in the 1111 family is very robust and cannot be reduced by HP-HTS, leading to only a small variation in the observed superconducting properties of Sm1111 whether prepared by CSP or HP-HTS. This is the first comprehensive investigation of the high-pressure development of Sm1111, which shows distinct behaviour from other families of iron-based superconductors. △ Less

Submitted 30 December, 2024; originally announced December 2024.

Comments: 54 pages, 24 figures

Journal ref: Ceramics International (2025)

An AMReX-based Compressible Reacting Flow Solver for High-speed Reacting Flows relevant to Hypersonic Propulsion

Authors: Shivank Sharma, Ral Bielawski, Oliver Gibson, Shuzhi Zhang, Vansh Sharma, Andreas H. Rauch, Jagmohan Singh, Sebastian Abisleiman, Michael Ullman, Shivam Barwey, Venkat Raman

Abstract: This work presents a comprehensive framework for the efficient implementation of finite-volume-based reacting flow solvers, specifically tailored for high speed propulsion applications. Using the exascale computing project (ECP) based AMReX framework, a compressible flow solver for handling high-speed reacting flows is developed. This work is complementary to the existing PeleC solver, emphasizing… ▽ More This work presents a comprehensive framework for the efficient implementation of finite-volume-based reacting flow solvers, specifically tailored for high speed propulsion applications. Using the exascale computing project (ECP) based AMReX framework, a compressible flow solver for handling high-speed reacting flows is developed. This work is complementary to the existing PeleC solver, emphasizing specific applications that include confined shock-containing flows, stationary and moving shocks and detonations. The framework begins with a detailed exposition of the numerical methods employed, emphasizing their application to complex geometries and their effectiveness in ensuring accurate and stable numerical simulations. Subsequently, an in-depth analysis evaluates the solver's performance across canonical and practical geometries, with particular focus on computational cost and efficiency. The solver's scalability and robustness are demonstrated through practical test cases, including flow path simulations of scramjet engines and detailed analysis of various detonation phenomena. △ Less

Submitted 28 March, 2025; v1 submitted 1 December, 2024; originally announced December 2024.

Comments: 2025 03 28 V2 Added references and fixed typos

3D Migration Aperture and Formula Connecting Dips of Prestack Time Migrated and Unmigrated Data

Authors: Jagmeet Singh

Abstract: Formula connecting dips of unmigrated 2D and prestack time migrated constant offset gathers was recently proposed (Singh, 2024). A handy formula for 2D prestack migration aperture was also derived. We extend the same work to the 3D case, that is, we derive prestack time migration aperture, and formula connecting dips as a function of dip of a planar reflector and azimuth w.r.t. the dip direction. Formula connecting dips of unmigrated 2D and prestack time migrated constant offset gathers was recently proposed (Singh, 2024). A handy formula for 2D prestack migration aperture was also derived. We extend the same work to the 3D case, that is, we derive prestack time migration aperture, and formula connecting dips as a function of dip of a planar reflector and azimuth w.r.t. the dip direction. △ Less

Submitted 3 November, 2024; originally announced November 2024.

Comments: 11 pages, 14 figures

Praseodymium doping effect on the superconducting properties of FeSe$_{0.5}$Te$_{0.5}$ bulks under ambient and high-pressure growth conditions

Authors: Priya Singh, Manasa Manasa, Mohammad Azam, Tatiana Zajarniuk, Svitlana Stelmakh, Taras Palasyuk, Jan Mizeracki, Tomasz Cetner, Andrzej Morawski, Cezariusz Jastrzębski, Michał Wierzbicki, Shiv J. Singh

Abstract: A series of Pr-doped FeSe$_{0.5}$Te$_{0.5}$ (Fe$_{1-x}$Pr$_x$Se$_{0.5}$Te$_{0.5}$; $x = 0$ to 0.3) bulks are prepared by conventional synthesis process at ambient pressure (CSP), and high gas pressure and high temperature synthesis (HP-HTS) methods. These bulks are well characterized by structural and microstructural analysis, Raman spectroscopy, transport, and magnetic measurements. The HP-HTS pr… ▽ More A series of Pr-doped FeSe$_{0.5}$Te$_{0.5}$ (Fe$_{1-x}$Pr$_x$Se$_{0.5}$Te$_{0.5}$; $x = 0$ to 0.3) bulks are prepared by conventional synthesis process at ambient pressure (CSP), and high gas pressure and high temperature synthesis (HP-HTS) methods. These bulks are well characterized by structural and microstructural analysis, Raman spectroscopy, transport, and magnetic measurements. The HP-HTS process of the parent bulks has enhanced the onset transition temperature ($T_c^{\rm onset}$) by 1.5 K and the critical current density ($J_c$) by two orders of magnitude compared to the CSP method. Pr-doped FeSe$_{0.5}$Te$_{0.5}$ up to 10% doping content prepared, either CSP or HP-HTS, slightly increases the unit cell volume, and high-pressure growth produces an almost pure superconducting phase, which confirms the successful Pr-doping at Fe sites. Raman spectroscopy measurements and DFT calculations suggest the substitution of Pr-atoms in the interlayer spacing of Fe(Se,Te) lattice. High-pressure growth of Fe$_{1-x}$Pr$_x$Se$_{0.5}$Te$_{0.5}$ also makes the sample less dense compared to the parent sample grown by HP-HTS. Transport and magnetic measurements depict that Tconset is almost unaffected by Pr-doping, whereas $J_c$ of Pr-doped FeSe$_{0.5}$Te$_{0.5}$ is enhanced by one order of magnitude relative to the parent sample developed by CSP but lower than that of the parent sample grown by HP-HTS. Hence, Pr-doping at Fe sites preserves $T_c^{\rm onset}$ and improves $J_c$ of FeSe$_{0.5}$Te$_{0.5}$ regardless of the doping contents and growth conditions. These results are promising for the practical application of iron-based superconductors to improve $J_c$ properties without affecting $T_c^{\rm onset}$ through CSP process and congruent with discoveries from other superconductors, like cuprates and MgB$_2$. △ Less

Submitted 14 May, 2025; v1 submitted 8 October, 2024; originally announced October 2024.

Comments: 50 pages, 1 table, 15 figures, Author's list updated

Journal ref: Physica C: Superconductivity and its Applications 633, 1354729 (2025)

A Method for Proton Detector Efficiency Measurement with Applications in Neutron Beta Decay and Lifetime Experiments

Authors: Grant V. Riley, Nadia Fomin, Jaideep Taggart Singh, William Greene, Rebecca Godri, Evan Adamek, Eli Carter

Abstract: This article proposes a new method to measure the proton detector efficiency for use in "beam" determinations of the free neutron lifetime. There is currently a 4σ disagreement between the "beam" and "storage" methods of measuring the lifetime of the neutron. A possible reason for this is a systematic uncertainty that is not properly accounted for in one or both types of experiments. Absolute prot… ▽ More This article proposes a new method to measure the proton detector efficiency for use in "beam" determinations of the free neutron lifetime. There is currently a 4σ disagreement between the "beam" and "storage" methods of measuring the lifetime of the neutron. A possible reason for this is a systematic uncertainty that is not properly accounted for in one or both types of experiments. Absolute proton counting is an essential facet of the "beam" experimental approach. The absolute detector efficiency is not currently known for existing experiments and could be a source of a hidden systematic error. The proposed absolute calibration techniques can also be extended to new, large area particle detectors designed for future experiments. We propose to laser ionize a beam of atomic hydrogen and simultaneously count both the outgoing protons and electrons. Due to recent advances in UV laser and atomic hydrogen beam technologies, we estimate a count rate as high as ~200k proton-electrons pairs per second under the most favorable scheme discussed. Our proposed technique would remove one of the leading systematic uncertainties in the determination of the neutron lifetime, making an precision of {\pm}0.16 s feasible. Precise and accurate knowledge of the proton detection efficiency is crucial to fully understanding the systematics of the "beam" measurement method as well as developing next generation experiments that will have the precision to test the Standard Model. △ Less

Submitted 3 October, 2024; originally announced October 2024.

Comments: 24 pages, 4 figures

The track-length extension fitting algorithm for energy measurement of interacting particles in liquid argon TPCs and its performance with ProtoDUNE-SP data

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, F. Akbar, N. S. Alex, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, T. Alves, H. Amar, P. Amedo, J. Anderson, C. Andreopoulos , et al. (1348 additional authors not shown)

Abstract: This paper introduces a novel track-length extension fitting algorithm for measuring the kinetic energies of inelastically interacting particles in liquid argon time projection chambers (LArTPCs). The algorithm finds the most probable offset in track length for a track-like object by comparing the measured ionization density as a function of position with a theoretical prediction of the energy los… ▽ More This paper introduces a novel track-length extension fitting algorithm for measuring the kinetic energies of inelastically interacting particles in liquid argon time projection chambers (LArTPCs). The algorithm finds the most probable offset in track length for a track-like object by comparing the measured ionization density as a function of position with a theoretical prediction of the energy loss as a function of the energy, including models of electron recombination and detector response. The algorithm can be used to measure the energies of particles that interact before they stop, such as charged pions that are absorbed by argon nuclei. The algorithm's energy measurement resolutions and fractional biases are presented as functions of particle kinetic energy and number of track hits using samples of stopping secondary charged pions in data collected by the ProtoDUNE-SP detector, and also in a detailed simulation. Additional studies describe the impact of the dE/dx model on energy measurement performance. The method described in this paper to characterize the energy measurement performance can be repeated in any LArTPC experiment using stopping secondary charged pions. △ Less

Submitted 26 December, 2024; v1 submitted 26 September, 2024; originally announced September 2024.

Report number: FERMILAB-PUB-24-0561-LBNF-PPD, CERN-EP-2024-256

DUNE Phase II: Scientific Opportunities, Detector Concepts, Technological Solutions

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, T. Alves, H. Amar, P. Amedo, J. Anderson, C. Andreopoulos, M. Andreotti , et al. (1347 additional authors not shown)

Abstract: The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy toward the implementation of this leading-edge, large-scale science project. The 2023 report of the US Particle Physics Project Prioritization Panel (P5) reaffirmed this vision and strongly endorsed DUNE Phase I… ▽ More The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy toward the implementation of this leading-edge, large-scale science project. The 2023 report of the US Particle Physics Project Prioritization Panel (P5) reaffirmed this vision and strongly endorsed DUNE Phase I and Phase II, as did the European Strategy for Particle Physics. While the construction of the DUNE Phase I is well underway, this White Paper focuses on DUNE Phase II planning. DUNE Phase-II consists of a third and fourth far detector (FD) module, an upgraded near detector complex, and an enhanced 2.1 MW beam. The fourth FD module is conceived as a "Module of Opportunity", aimed at expanding the physics opportunities, in addition to supporting the core DUNE science program, with more advanced technologies. This document highlights the increased science opportunities offered by the DUNE Phase II near and far detectors, including long-baseline neutrino oscillation physics, neutrino astrophysics, and physics beyond the standard model. It describes the DUNE Phase II near and far detector technologies and detector design concepts that are currently under consideration. A summary of key R&D goals and prototyping phases needed to realize the Phase II detector technical designs is also provided. DUNE's Phase II detectors, along with the increased beam power, will complete the full scope of DUNE, enabling a multi-decadal program of groundbreaking science with neutrinos. △ Less

Submitted 22 August, 2024; originally announced August 2024.

Report number: FERMILAB-TM-2833-LBNF

Certain aspects of prestack deconvolution

Authors: Jagmeet Singh

Abstract: In a previous paper, we had shown that because of varying angles of incidence there is a varying degree of convolution down a trace and across a gather, necessitating deconvolution operators varying with time and offset. This idea is examined further in $t$-$x$ as well as $τ$-$p$ domain. We suggest better ways to deconvolve data in $τ$-$p$ domain, taking into account varying degree of convolution… ▽ More In a previous paper, we had shown that because of varying angles of incidence there is a varying degree of convolution down a trace and across a gather, necessitating deconvolution operators varying with time and offset. This idea is examined further in $t$-$x$ as well as $τ$-$p$ domain. We suggest better ways to deconvolve data in $τ$-$p$ domain, taking into account varying degree of convolution in this domain. We derive formulae for periods of surface multiples in $τ$-$p$ domain, e.g., water column peg-legs and reverberations, which have a fixed period depending only on the value of $p$ -- and suggest a way to check/revise the picked velocity using the formulae, provided the multiples are well separated from the primary. Periodicity of two way surface multiples is also studied. △ Less

Submitted 6 August, 2024; originally announced August 2024.

First Measurement of the Total Inelastic Cross-Section of Positively-Charged Kaons on Argon at Energies Between 5.0 and 7.5 GeV

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, T. Alves, H. Amar, P. Amedo, J. Anderson, C. Andreopoulos, M. Andreotti , et al. (1341 additional authors not shown)

Abstract: ProtoDUNE Single-Phase (ProtoDUNE-SP) is a 770-ton liquid argon time projection chamber that operated in a hadron test beam at the CERN Neutrino Platform in 2018. We present a measurement of the total inelastic cross section of charged kaons on argon as a function of kaon energy using 6 and 7 GeV/$c$ beam momentum settings. The flux-weighted average of the extracted inelastic cross section at each… ▽ More ProtoDUNE Single-Phase (ProtoDUNE-SP) is a 770-ton liquid argon time projection chamber that operated in a hadron test beam at the CERN Neutrino Platform in 2018. We present a measurement of the total inelastic cross section of charged kaons on argon as a function of kaon energy using 6 and 7 GeV/$c$ beam momentum settings. The flux-weighted average of the extracted inelastic cross section at each beam momentum setting was measured to be 380$\pm$26 mbarns for the 6 GeV/$c$ setting and 379$\pm$35 mbarns for the 7 GeV/$c$ setting. △ Less

Submitted 1 August, 2024; originally announced August 2024.

Report number: CERN-EP-2024-211, FERMILAB-PUB-24-0216-V

Journal ref: Phys. Rev. D 110, (2024) 092011

Supernova Pointing Capabilities of DUNE

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, T. Alves, H. Amar, P. Amedo, J. Anderson, D. A. Andrade , et al. (1340 additional authors not shown)

Abstract: The determination of the direction of a stellar core collapse via its neutrino emission is crucial for the identification of the progenitor for a multimessenger follow-up. A highly effective method of reconstructing supernova directions within the Deep Underground Neutrino Experiment (DUNE) is introduced. The supernova neutrino pointing resolution is studied by simulating and reconstructing electr… ▽ More The determination of the direction of a stellar core collapse via its neutrino emission is crucial for the identification of the progenitor for a multimessenger follow-up. A highly effective method of reconstructing supernova directions within the Deep Underground Neutrino Experiment (DUNE) is introduced. The supernova neutrino pointing resolution is studied by simulating and reconstructing electron-neutrino charged-current absorption on $^{40}$Ar and elastic scattering of neutrinos on electrons. Procedures to reconstruct individual interactions, including a newly developed technique called ``brems flipping'', as well as the burst direction from an ensemble of interactions are described. Performance of the burst direction reconstruction is evaluated for supernovae happening at a distance of 10 kpc for a specific supernova burst flux model. The pointing resolution is found to be 3.4 degrees at 68% coverage for a perfect interaction-channel classification and a fiducial mass of 40 kton, and 6.6 degrees for a 10 kton fiducial mass respectively. Assuming a 4% rate of charged-current interactions being misidentified as elastic scattering, DUNE's burst pointing resolution is found to be 4.3 degrees (8.7 degrees) at 68% coverage. △ Less

Submitted 14 July, 2024; originally announced July 2024.

Comments: 25 pages, 16 figures

Report number: FERMILAB-PUB-24-0319-LBNF

Phase separation in a binary mixture of sticky spheres

Authors: D. C. Thakur, Jalim Singh, A. V. Anil Kumar

Abstract: We numerically investigate the dependence of range of attractive potential on the phase separation of 2-D binary systems. Through extensive simulations and analysis, we show that when the range of attractive interactions approaches the sticky sphere limit, the system undergoes a phase separation at lower temperature. Further reduction in temperature causes the system to mix again. These mixing-dem… ▽ More We numerically investigate the dependence of range of attractive potential on the phase separation of 2-D binary systems. Through extensive simulations and analysis, we show that when the range of attractive interactions approaches the sticky sphere limit, the system undergoes a phase separation at lower temperature. Further reduction in temperature causes the system to mix again. These mixing-demixing-mixing transitions are of first order. Such phase separation is not observed for systems with larger interaction range. In the phase separated region of the phase diagram, one of the components of the mixture chooses to be in crystalline configuration, while other being in disordered state △ Less

Submitted 13 May, 2024; originally announced May 2024.

Comments: 7 pages, 7figures

Copper doping effects on the superconducting properties of Sm-based oxypnictides

Authors: Mohammad Azam, Manasa Manasa, Tatiana Zajarniuk, Taras Palasyuk, Ryszard Diduszko, Tomasz Cetner, Andrzej Morawski, Cezariusz Jastrzebski, Michał Wierzbicki, Andrzej Wiśniewski, Shiv J. Singh

Abstract: A systematic investigation has been performed by synthesis and comprehensive characterization of a series of SmFe1-xCuxAsO0.8F0.2 bulks (x = 0 to 0.2). These samples are well characterized by structural, Raman spectroscopy, microstructural, transport, magnetic measurements, and supplementary calculations within density functional theory (DFT). The parent compound, SmFeAsO0.8F0.2 (Sm1111), exhibits… ▽ More A systematic investigation has been performed by synthesis and comprehensive characterization of a series of SmFe1-xCuxAsO0.8F0.2 bulks (x = 0 to 0.2). These samples are well characterized by structural, Raman spectroscopy, microstructural, transport, magnetic measurements, and supplementary calculations within density functional theory (DFT). The parent compound, SmFeAsO0.8F0.2 (Sm1111), exhibits a superconducting transition temperature (Tc) of approximately 54 K. The lattice volume (V) is increased with Cu substitution (x) without observing any impurity phase related to copper, which confirms the successful incorporation of Cu at Fe sites in the superconducting FeAs layers. These analyses are also well in agreement with Raman spectroscopy measurements and relevant DFT results. The superconducting transition is decreased systematically with copper doping and completely suppressed for 7% Cu-doped Sm1111 (x = 0.07). A large amount of Cu substitution (x greater than 0.07) has demonstrated the metal to insulate transition in the low-temperature range, and no impurity phase was observed even at high Cu doping levels (x = 0.2). The calculated critical current density of the parent sample is suppressed with copper substitution, suggesting the reduced pinning centers, sample density, and grain connections, as confirmed by the microstructural analysis. Our studies suggest that the substitution of Cu in the superconducting FeAs layer, resulting the enlargement of the lattice volume, is a source of strong disorder scattering, leading to the suppression of Tc and the emergence of metal-to-insulator, unlike the more successful carrier doping by nickel (Ni) or cobalt (Co), as previously reported. △ Less

Submitted 9 April, 2024; originally announced April 2024.

Comments: 40 pages, 16 Figures

Journal ref: Journal of the American Ceramic Society 2024

Performance of a modular ton-scale pixel-readout liquid argon time projection chamber

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, T. Alves, H. Amar, P. Amedo, J. Anderson, D. A. Andrade , et al. (1340 additional authors not shown)

Abstract: The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmi… ▽ More The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmic ray events collected in the spring of 2021. We use this sample to demonstrate the imaging performance of the charge and light readout systems as well as the signal correlations between the two. We also report argon purity and detector uniformity measurements, and provide comparisons to detector simulations. △ Less

Submitted 5 March, 2024; originally announced March 2024.

Comments: 47 pages, 41 figures

Report number: FERMILAB-PUB-24-0073-LBNF

Effect of impurity phase and high-pressure synthesis on the superconducting properties of CaKFe4As4

Authors: Manasa Manasa, Mohammad Azam, Tatiana Zajarniuk, Ryszard Diduszko, Tomasz Cetner, Andrzej Morawski, Andrzej Wiśniewski, Shiv J. Singh

Abstract: AeAFe4As4 (Ae = Ca, A = K; 1144) having a transition temperature of 35 K is a stoichiometric family of iron-based superconductors (FBS). Here, we present a detailed study of a high-pressure synthesis of CaKFe4As4 bulks to investigate the impact of these conditions on the superconducting properties of the 1144 family. Additionally, these samples are also prepared by conventional synthesis method at… ▽ More AeAFe4As4 (Ae = Ca, A = K; 1144) having a transition temperature of 35 K is a stoichiometric family of iron-based superconductors (FBS). Here, we present a detailed study of a high-pressure synthesis of CaKFe4As4 bulks to investigate the impact of these conditions on the superconducting properties of the 1144 family. Additionally, these samples are also prepared by conventional synthesis method at ambient pressure (CSP) and studied the influence of impurities on the superconducting properties of CaKFe4As4. Structural, microstructural, transport and magnetization measurements have been performed to reach the final conclusions. Interestingly, the high-pressure synthesis of the parent CaKFe4As4 compound enhances the transition temperature (Tc) by 2 K and the critical current density (Jc) by one order of magnitude in the whole magnetic field range of 9 T than that of the 1144 bulks prepared by CSP. It suggests the improvement of the pinning centers and grain connections by the high-pressure synthesis approach. Interestingly, our results depict the superconducting onset transition temperature (Tconset) of this stoichiometric 1144 family is robust with the presence of the common 122 (CaFe2As2 or KFe2As2) impurity phases, which is a different behavior compared to other FBS families. However, these impurity phases reduce the grain connections and lead to the phase separation during the formation of the superconducting (1144) phase. △ Less

Submitted 27 February, 2024; originally announced February 2024.

Comments: 39 Pages, 16 Figures

Journal ref: Journal of Physics and Chemistry of Solids 190, 111996 (2024)

Watch the Moon, Learn the Moon: Lunar Geology Research at School Level with Telescope and Open Source Data

Authors: K. J. Luke, Abhinav Mishra, Vihaan Ghare, Shaurya Chanyal, Priyamvada Shukla, Anushreya Pandey, Vaishnavi Rane, Ashadieeyah Pathan, Parv Vaja, Sai Gogate, Shreyansh Tiwari, Jagruti Singh, Dhruv Davda

Abstract: Science-AI Symbiotic Group at Seven Square Academy, Naigaon was formed in 2023 with the purpose of bringing school students to the forefronts of science research by involving them in hands on research. In October 2023 a new project was started with the goal of studying the lunar surface by real-time observations and open source data. Twelve students/members from grades 8, 9, 10 participated in thi… ▽ More Science-AI Symbiotic Group at Seven Square Academy, Naigaon was formed in 2023 with the purpose of bringing school students to the forefronts of science research by involving them in hands on research. In October 2023 a new project was started with the goal of studying the lunar surface by real-time observations and open source data. Twelve students/members from grades 8, 9, 10 participated in this research attempt wherein each student filled an observation metric by observing the Moon on various days with a Bresser Messier 150mm/1200mm reflector Newtonian telescope. After the observations were done, the members were assigned various zones on the lunar near side for analysis of geological features. Then a data analysis metric was filled by each of students with the help of Lunar Reconnaissance Orbiter Camera's/ LROC's quickmap open access data hosted by Arizona State University. In this short paper a brief overview of this project is given. One example each of observation metric and data analysis metric is presented. This kind of project has high impact for school science education with minimal costs. This project can also serve as an interesting science outreach program for organisations looking forward to popularise planetary sciences research at school level. △ Less

Submitted 25 February, 2024; v1 submitted 10 December, 2023; originally announced February 2024.

Comments: 14 pages, 7 figures

Doping Liquid Argon with Xenon in ProtoDUNE Single-Phase: Effects on Scintillation Light

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, H. Amar Es-sghir, P. Amedo, J. Anderson, D. A. Andrade, C. Andreopoulos , et al. (1297 additional authors not shown)

Abstract: Doping of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first doping test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUN… ▽ More Doping of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first doping test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUNE-SP) at CERN, featuring 720 t of total liquid argon mass with 410 t of fiducial mass. A 5.4 ppm nitrogen contamination was present during the xenon doping campaign. The goal of the run was to measure the light and charge response of the detector to the addition of xenon, up to a concentration of 18.8 ppm. The main purpose was to test the possibility for reduction of non-uniformities in light collection, caused by deployment of photon detectors only within the anode planes. Light collection was analysed as a function of the xenon concentration, by using the pre-existing photon detection system (PDS) of ProtoDUNE-SP and an additional smaller set-up installed specifically for this run. In this paper we first summarize our current understanding of the argon-xenon energy transfer process and the impact of the presence of nitrogen in argon with and without xenon dopant. We then describe the key elements of ProtoDUNE-SP and the injection method deployed. Two dedicated photon detectors were able to collect the light produced by xenon and the total light. The ratio of these components was measured to be about 0.65 as 18.8 ppm of xenon were injected. We performed studies of the collection efficiency as a function of the distance between tracks and light detectors, demonstrating enhanced uniformity of response for the anode-mounted PDS. We also show that xenon doping can substantially recover light losses due to contamination of the liquid argon by nitrogen. △ Less

Submitted 2 August, 2024; v1 submitted 2 February, 2024; originally announced February 2024.

Comments: 36 pages, 20 figures. Corrected author list; corrected typos across paper and polished text

Report number: CERN-EP-2024-024; FERMILAB-PUB-23-0819-LBNF

Nonlinear dynamics in neuromorphic photonic networks: physical simulation in Verilog-A

Authors: Hugh Morison, Jagmeet Singh, Nayem Al Kayed, A. Aadhi, Maryam Moridsadat, Marcus Tamura, Alexander N. Tait, Bhavin J. Shastri

Abstract: Advances in silicon photonics technology have enabled the field of neuromorphic photonics, where analog neuron-like processing elements are implemented in silicon photonics technology. Accurate and scalable simulation tools for photonic integrated circuits are critical for designing neuromorphic photonic circuits. This is especially important when designing networks with recurrent connections, whe… ▽ More Advances in silicon photonics technology have enabled the field of neuromorphic photonics, where analog neuron-like processing elements are implemented in silicon photonics technology. Accurate and scalable simulation tools for photonic integrated circuits are critical for designing neuromorphic photonic circuits. This is especially important when designing networks with recurrent connections, where the dynamics of the system may give rise to unstable and oscillatory solutions which need to be accurately modelled. These tools must simultaneously simulate the analog electronics and the multi-channel (wavelength-division-multiplexed) photonics contained in a photonic neuron to accurately predict on-chip behaviour. In this paper, we utilize a Verilog-A model of the photonic neural network to investigate the dynamics of recurrent integrated circuits. We begin by reviewing the theory of continuous-time recurrent neural networks as dynamical systems and the relation of these dynamics to important physical features of photonic neurons such as cascadability. We then present the neural dynamics of systems of one and two neurons in the simulated Verilog-A circuit, which are compared to the expected dynamics of the abstract CTRNN model. Due to the presence of parasitic circuit elements in the Verilog-A simulation, it is seen that there is a topological equivalence, but not an exact isomorphism, between the theoretical model and the simulated model. The implications of these discrepancies for the design of neuromorphic photonic circuits are discussed. Our findings pave the way for the practical implementation of large-scale silicon photonic recurrent neural networks. △ Less

Submitted 23 January, 2024; originally announced January 2024.

Comments: 17 pages, 9 figures. Submitted to Physical Review Applied

Turbulent flow of Newtonian and non-Newtonian fluids in rough channels: Part I: Roughness effect on Newtonian fluids

Authors: C. Narayanan, S. Nauer, J. -S. Singh, R. Belt, T. Palermo, D. Lakehal

Abstract: Direct Numerical Simulations (DNS) of turbulent channel flow at a shear Reynolds number of $Re_{*}=360$ for Newtonian and Herschel-Bulkley fluids in smooth and rough channels has been performed. The rough surface was made of irregular undulations modeled with the immersed surface method. The rough surface was such that the ratio of the channel half-height to the RMS roughness height is 48, and the… ▽ More Direct Numerical Simulations (DNS) of turbulent channel flow at a shear Reynolds number of $Re_{*}=360$ for Newtonian and Herschel-Bulkley fluids in smooth and rough channels has been performed. The rough surface was made of irregular undulations modeled with the immersed surface method. The rough surface was such that the ratio of the channel half-height to the RMS roughness height is 48, and the RMS and the maximum crest and trough heights are 7.5 and 23 wall units, respectively. This part, limited to Newtonian turbulent flows, has demonstrated the generic nature of the rough surface that is ideal for studying non-Newtonian flows in practical applications. The results confirm that turbulence in the outer layer is not directly affected by the rough surface. The roughness effects on the turbulence quantities are confined to the layer between 0 and 25 wall units; beyond which, the profiles collapse with those for smooth pipes. In the roughness sublayer, the streamwise normal Reynolds stress is reduced while the spanwise and wall-normal components are increased. The Reynolds shear stress increases significantly, causing a proportional increase in turbulence production near the wall affecting the dominant terms in the turbulent kinetic energy budget. The friction factor using the Colebrook-White correlation calculated by specifying the sand-grain roughness as 7.5 wall units predicts the friction velocity and the bulk velocity accurately. The streaky structures that exist near smooth walls were observed to be broken by the roughness elements, leading to a denser population of coherent structures near the wall, which increase the velocity fluctuations. The coherent structures developed in the roughness layer do not seem to penetrate in to the outer layer, and no evidence could be found as to the direct impact of the roughness layer on the outer one. △ Less

Submitted 8 December, 2023; originally announced December 2023.

The DUNE Far Detector Vertical Drift Technology, Technical Design Report

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, H. Amar, P. Amedo, J. Anderson, D. A. Andrade, C. Andreopoulos , et al. (1304 additional authors not shown)

Abstract: DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precisi… ▽ More DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precision measurements of the PMNS matrix parameters, including the CP-violating phase. It will also stand ready to observe supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. The DUNE far detector implements liquid argon time-projection chamber (LArTPC) technology, and combines the many tens-of-kiloton fiducial mass necessary for rare event searches with the sub-centimeter spatial resolution required to image those events with high precision. The addition of a photon detection system enhances physics capabilities for all DUNE physics drivers and opens prospects for further physics explorations. Given its size, the far detector will be implemented as a set of modules, with LArTPC designs that differ from one another as newer technologies arise. In the vertical drift LArTPC design, a horizontal cathode bisects the detector, creating two stacked drift volumes in which ionization charges drift towards anodes at either the top or bottom. The anodes are composed of perforated PCB layers with conductive strips, enabling reconstruction in 3D. Light-trap-style photon detection modules are placed both on the cryostat's side walls and on the central cathode where they are optically powered. This Technical Design Report describes in detail the technical implementations of each subsystem of this LArTPC that, together with the other far detector modules and the near detector, will enable DUNE to achieve its physics goals. △ Less

Submitted 5 December, 2023; originally announced December 2023.

Comments: 425 pages; 281 figures Central editing team: A. Heavey, S. Kettell, A. Marchionni, S. Palestini, S. Rajogopalan, R. J. Wilson

Report number: Fermilab Report no: TM-2813-LBNF

Optical anisotropy and nonlinearity in deep ultraviolet fluorooxoborates

Authors: Bing-Hua Lei, Chao Cao, David J. Singh

Abstract: Optical anisotropy and nonlinearity are two tantalizingly important and enticing properties of an optical crystal. Combining these two features will have a miraculous effect. The up conversion can extend solid state laser sources to the ultraviolet and deep ultraviolet (DUV) ranges through harmonic generation and for down conversion needed for quantum information technology, but only a few suitabl… ▽ More Optical anisotropy and nonlinearity are two tantalizingly important and enticing properties of an optical crystal. Combining these two features will have a miraculous effect. The up conversion can extend solid state laser sources to the ultraviolet and deep ultraviolet (DUV) ranges through harmonic generation and for down conversion needed for quantum information technology, but only a few suitable materials are known as the medium because of the combination of properties that are required. These include suitable band gaps, moderate optical anisotropy for phase matching and strong nonlinear optical (NLO) response. Fluorooxoborates are a new ideal platform for this effect in DUV. Here we demonstrate that fluorooxoborate is the optimal framework for DUV NLO material and show that the significance of the incorporation of fluorine in borates. The NLO performance of fluorooxoborates is strongly improved in terms of local crystal structure and distribution of electronic states. Importantly, the role of fluorine is to control the structure, while maintaining high band gaps but does not directly provide large contributions to birefringence and the second harmonic generation as the conventional assumptions. This is a consequence of the microscopic electron distribution and the energy position of the fluorine states well below the valence band maxima. Based on our understandings, we constructed two artificial structure and they all behave as anticipated. △ Less

Submitted 20 December, 2023; v1 submitted 4 December, 2023; originally announced December 2023.

Comments: This manuscript contain many errors

Enhancement of Superconducting Properties of Polycrystalline CaKFe4As4 by High-Pressure Growth

Authors: Manasa Manasa, Mohammad Azam, Tatiana Zajarniuk, Ryszard Diduszko, Tomasz Cetner, Andrzej Morawski, Andrzej Wisniewski, Shiv J. Singh

Abstract: High-pressure growth is a unique method to improve the sample quality and size. Here, we have used the high gas pressure and high-temperature synthesis (HP-HTS) method to grow CaKFe4As4 (1144) bulks and investigated their superconducting properties using structural, microstructural, transport, and magnetic studies. The microstructural analysis demonstrates that 1144 samples prepared by HP-HTS have… ▽ More High-pressure growth is a unique method to improve the sample quality and size. Here, we have used the high gas pressure and high-temperature synthesis (HP-HTS) method to grow CaKFe4As4 (1144) bulks and investigated their superconducting properties using structural, microstructural, transport, and magnetic studies. The microstructural analysis demonstrates that 1144 samples prepared by HP-HTS have improved the sample density and grain connectivity. The transition temperature (Tconset) of 1144 bulks prepared by HP-HTS is increased up to 35.2 K with a transition width (ΔT) of 1 K, which is remarkably comparable to the reported 1144 single crystal. Additionally, the critical current density (Jc) is enhanced by almost one order of magnitude compared with the parent compound prepared by the conventional synthesis process at ambient pressure (CSP), which could be attributed to the improved sample density and effective pinning centers. Our study demonstrates that the sample quality and superconducting properties of various iron-based superconductors can be enhanced by applying the HP-HTS approach, and further research is demanded in this direction. △ Less

Submitted 25 November, 2023; originally announced November 2023.

Comments: 17 pages, 7 figures

Journal ref: IEEE Transactions on Applied Superconductivity (2023)

Antimony Doping Effect on the Superconducting Properties of SmFeAs(O,F)

Authors: Mohammad Azam, Manasa Manasa, Tatiana Zajarniuk, Ryszard Diduszko, Tomasz Cetner, Andrzej Morawski, Andrzej Wisniewski, Shiv J. Singh

Abstract: We report the synthesis and characterization of a series of antimony-doped SmFeAs1-xSbxO0.8F0.2 (x = 0, 0.01, 0.03, 0.05, 0.1, 0.2, and 0.3) bulks to investigate the twin doping effects on the superconducting properties of SmFeAs(O,F) caused by fluorine (F) incorporation at O-site in SmO layer and antimony (Sb) substitution at As-site in the conducting layer (FeAs). Since the antimony (Sb) has a l… ▽ More We report the synthesis and characterization of a series of antimony-doped SmFeAs1-xSbxO0.8F0.2 (x = 0, 0.01, 0.03, 0.05, 0.1, 0.2, and 0.3) bulks to investigate the twin doping effects on the superconducting properties of SmFeAs(O,F) caused by fluorine (F) incorporation at O-site in SmO layer and antimony (Sb) substitution at As-site in the conducting layer (FeAs). Since the antimony (Sb) has a larger size than arsenic (As), the enhancement of lattice parameters has been confirmed by the XRD analysis. Microstructural analysis confirms that Sb-doping leads to a small improvement in the sample density and an increase in the inhomogeneity of the constituent elements, especially at higher Sb-doping levels. The parent compound SmFeAsO0.8F0.2 has shown the superconducting transition (Tc) at ~54 K, which is systematically reduced with the antimony doping contents (x). Our investigation indicates that the Sb-doped SmFeAs(O,F) phase at low levels is less prone to the multiphase formation than at high levels, which affects the inter- and intragranular behaviour originating from the microstructure nature of 1111 bulks. The critical current density (Jc) of the parent compound has almost the same value as previously reported, which is suppressed slowly with increased Sb-doping. It could be due to the reduced grain connections and the effective pinning centers. This study confirms that the superconducting FeAs layer doping with larger ions at arsenic sites does not support the superconducting properties of Sm1111, which is a distinct behavior from that of Sb-doped CeFeAs(O,F) and LaFeAs(O,F). △ Less

Submitted 23 November, 2023; originally announced November 2023.

Comments: 18 pages, 8 figures

Journal ref: IEEE Transactions on Applied Superconductivity (2023)

Optimization of Synthesis Parameters and Superconducting Properties of GdFeAsO1-xFx

Authors: Mohammad Azam, Manasa Manasa, Tatiana Zajarniuk, Svitlana Stelmakh, Tomasz Cetner, Andrzej Morawski, Andrzej Wiśniewski, Shiv J. Singh

Abstract: REFeAsO (RE1111; RE: rare earth) belongs to the 1111 family of iron-based superconductors (FBS), which illustrates the enhancement of the superconducting transition (Tc) with smaller radii of RE. However, the synthesis of the 1111 phase with a heavy rare-earth is always challenging. In this paper, we report the optimization of the growth and superconducting properties of F-doped GdFeAsO1-xFx bulks… ▽ More REFeAsO (RE1111; RE: rare earth) belongs to the 1111 family of iron-based superconductors (FBS), which illustrates the enhancement of the superconducting transition (Tc) with smaller radii of RE. However, the synthesis of the 1111 phase with a heavy rare-earth is always challenging. In this paper, we report the optimization of the growth and superconducting properties of F-doped GdFeAsO1-xFx bulks by preparing the samples in a wide temperature range (700-1100°C) at ambient pressure. The optimized synthesis parameters are concluded based on structural, microstructural, transport, and magnetic measurements. These findings suggest that the optimal conditions for preparing F-doped Gd1111 bulks involve a two-step process at 900°C for 61 hours at ambient pressure, which is lower than previously reported. The optimized samples have revealed the superconducting transition temperature (Tconset) of 43 K for GdFeAsO0.83F0.17. The first-time reported critical current Jc value for this Gd1111 is observed of the order of 10^3 (A/cm^2) at 0 T and 5 K. Our investigation also concluded that highly pure precursors, particularly gadolinium metal, are required to achieve the superconducting properties of F-doped Gd1111. A high growth pressure of 1 GPa reduces the superconducting properties of F-doped Gd1111. △ Less

Submitted 22 November, 2023; originally announced November 2023.

Journal ref: IEEE Transactions on Applied Superconductivity (2023)

Comparison of Gd addition effect on the superconducting properties of FeSe0.5Te0.5 bulks under ambient and high-pressure conditions

Authors: Manasa Manasa, Mohammad Azam, Tatiana Zajarniuk, Ryszard Diduszko, Jan Mizeracki, Tomasz Cetner, Andrzej Morawski, Andrzej Wisniewski, Shiv J. Singh

Abstract: We have prepared a series of (FeSe0.5Te0.5 + xGd) bulk samples, with x = 0, 0.03, 0.05, 0.07, 0.1 and 0.2, through the convenient solid-state reaction method at ambient pressure (CSP). High gas pressure and high-temperature synthesis methods (HP-HTS) are also applied to grow the parent compound (x = 0) and 5-wt% of Gd-added bulks. Structural, microstructural, transport and magnetic characterizatio… ▽ More We have prepared a series of (FeSe0.5Te0.5 + xGd) bulk samples, with x = 0, 0.03, 0.05, 0.07, 0.1 and 0.2, through the convenient solid-state reaction method at ambient pressure (CSP). High gas pressure and high-temperature synthesis methods (HP-HTS) are also applied to grow the parent compound (x = 0) and 5-wt% of Gd-added bulks. Structural, microstructural, transport and magnetic characterizations have been performed on these samples in order to draw the final conclusion. Our analysis results that the HP-HTS applied for the parent compound enhances the transition temperature (Tc) and the critical current density (Jc) with the improved sample density and intergrain connections. The lattice parameter c is increased with Gd additions, suggesting a small amount of Gd enters the tetragonal lattice of FeSe0.5Te0.5 and the Gd interstitial sites are along the c-axis. A systematic decrease of the onset transition temperature Tc is observed with Gd additions, however, the calculated Jc of these Gd-added samples is almost the same as that of the parent compound prepared by CSP. It specifies that there is no improvement of the grain connections or pinning properties due to these rare earth additions. However, Gd-added FeSe0.5Te0.5 bulks prepared by HP-HTS have revealed a slightly improved critical current density due to improved grain connections and sample density but have a lower transition temperature than that of the parent compounds. △ Less

Submitted 5 October, 2023; originally announced October 2023.

Comments: 33 pages, 9 figures, 3 tables

Journal ref: Ceramics International (2023)

High gas pressure and high-temperature synthesis (HP-HTS) technique and its impact on iron-based superconductors

Authors: Mohammad Azam, Manasa Manasa, Andrzej Morawski, Tomasz Cetner, Shiv J. Singh

Abstract: The high-pressure growth technique generally plays an important role in the improvement of the sample quality and the enhancement of various physical and magnetic properties of materials. The high gas pressure technique provides a large sample space (10-15 cm) to grow various kinds of materials. In this paper, we introduce the high gas pressure and high-temperature synthesis (HP-HTS) technique tha… ▽ More The high-pressure growth technique generally plays an important role in the improvement of the sample quality and the enhancement of various physical and magnetic properties of materials. The high gas pressure technique provides a large sample space (10-15 cm) to grow various kinds of materials. In this paper, we introduce the high gas pressure and high-temperature synthesis (HP-HTS) technique that is present at our institute and is applied to the growth process of different kinds of superconducting materials, particularly iron-based superconductors. More details and the working principle of this HP-HTS technique are discussed. We have also demonstrated the current results based on the iron-based superconductors by using this unique HP-HTS technique. These results demonstrate the enhancement of the superconducting properties with the improved sample quality compared to the conventional synthesis process at ambient pressure. △ Less

Submitted 30 September, 2023; originally announced October 2023.

Comments: 12 pages, 8 figures

Journal ref: Crystals 2023, 13(10), 1525

Inferring physical laws by artificial intelligence based causal models

Authors: Jorawar Singh, Kishor Bharti, Arvind

Abstract: The advances in Artificial Intelligence (AI) and Machine Learning (ML) have opened up many avenues for scientific research, and are adding new dimensions to the process of knowledge creation. However, even the most powerful and versatile of ML applications till date are primarily in the domain of analysis of associations and boil down to complex data fitting. Judea Pearl has pointed out that Artif… ▽ More The advances in Artificial Intelligence (AI) and Machine Learning (ML) have opened up many avenues for scientific research, and are adding new dimensions to the process of knowledge creation. However, even the most powerful and versatile of ML applications till date are primarily in the domain of analysis of associations and boil down to complex data fitting. Judea Pearl has pointed out that Artificial General Intelligence must involve interventions involving the acts of doing and imagining. Any machine assisted scientific discovery thus must include casual analysis and interventions. In this context, we propose a causal learning model of physical principles, which not only recognizes correlations but also brings out casual relationships. We use the principles of causal inference and interventions to study the cause-and-effect relationships in the context of some well-known physical phenomena. We show that this technique can not only figure out associations among data, but is also able to correctly ascertain the cause-and-effect relations amongst the variables, thereby strengthening (or weakening) our confidence in the proposed model of the underlying physical process. △ Less

Submitted 9 November, 2023; v1 submitted 7 September, 2023; originally announced September 2023.

Comments: Latex 12 pages, 16 figures (Minor changes, references added)

Effect of Pb addition on microstructure, transport properties and the critical current density in a polycrystalline FeSe0.5Te0.5

Authors: Shiv J. Singh, Ryszard Diduszko, Przemysław Iwanowski, Tomasz Cetner, Andrzej Wisniewski, Andrzej Morawski

Abstract: We have investigated the effects of lead (Pb) additions (x) up to 40 wt.% (x = 0-0.4) on the structure, electrical properties, and magnetic properties of FeSe0.5Te0.5 superconductor. The samples were prepared by the solid-state reaction method and characterized by various techniques. The parent compound (x = 0) showed the onset temperature Tc onset of 15 K, and zero-resistance temperature, Tc offs… ▽ More We have investigated the effects of lead (Pb) additions (x) up to 40 wt.% (x = 0-0.4) on the structure, electrical properties, and magnetic properties of FeSe0.5Te0.5 superconductor. The samples were prepared by the solid-state reaction method and characterized by various techniques. The parent compound (x = 0) showed the onset temperature Tc onset of 15 K, and zero-resistance temperature, Tc offset of 12 K. The addition of Pb enhances the metallic characteristics of FeSe0.5Te0.5, but both Tc onset and Tc offset are decreased to the lower temperature with the broadened transition width. The Tc onset is nearly the same (10.3 K) at higher additions, such as x = 0.3 and 0.4, but zero resistivity is not observed up to 7 K. Microstructural analysis and transport studies suggest that for x > 0.05, Pb additions weakened the coupling between grains and suppressed the superconducting percolation, leading to a broad transition. More importantly, the inclusion of a relatively small amount of Pb (x = 0.05) increased the critical current density, Jc, in the entire magnetic field, which might be attributable to better phase uniformity as well as good grain connectivity. △ Less

Submitted 4 August, 2023; originally announced August 2023.

Journal ref: Appl. Phys. A 128, 476 (2022)

Cometal addition effect on superconducting properties and granular behaviours of polycrystalline FeSe0.5Te0.5

Authors: Manasa Manasa, Mohammad Azam, Tatiana Zajarniuk, Ryszard Diduszko, Tomasz Cetner, Andrzej Morawski, Andrzej Wiśniewski, Shiv J. Singh

Abstract: The enhanced performance of superconducting FeSe0.5Te0.5 materials with added microsized Pb and Sn particles is presented. A series of Pb and Sn added FeSe0.5Te0.5 (FeSe0.5Te0.5 + xPb + ySn; x = y = 0-0.1) bulks are fabricated by solid-state reaction method and characterized through various measurements. A very small amount of Sn and Pb additions enhance the transition temperature (Tconset) of pur… ▽ More The enhanced performance of superconducting FeSe0.5Te0.5 materials with added microsized Pb and Sn particles is presented. A series of Pb and Sn added FeSe0.5Te0.5 (FeSe0.5Te0.5 + xPb + ySn; x = y = 0-0.1) bulks are fabricated by solid-state reaction method and characterized through various measurements. A very small amount of Sn and Pb additions enhance the transition temperature (Tconset) of pure FeSe0.5Te0.5 by 1 K, sharpening the superconducting transition and improving the metallic nature in the normal state, whereas larger metal additions reduce Tconset by broadening the superconducting transition. Microstructural analysis and transport studies suggest that at x=y>0.02, Pb and Sn additions enhance the impurity phases, reduce the coupling between grains, and suppress the superconducting percolation, leading to a broad transition. FeSe0.5Te0.5 samples with 2wt% of cometal additions show the best performance with their critical current density, Jc, and the pinning force, Fp, which might be attributable to providing effective flux pinning centres. Our study shows that the inclusion of a relatively small amount of Pb and Sn works effectively for the enhancement of superconducting properties with an improvement of intergrain connections as well as better phase uniformity. △ Less

Submitted 2 August, 2023; originally announced August 2023.

Journal ref: Materials 2023, 16(7), 2892

High-pressure synthesis and the enhancement of the superconducting properties of FeSe0.5Te0.5

Authors: Mohammad Azam, Manasa Manasa, Tatiana Zajarniuk, Ryszard Diduszko, Tomasz Cetner, Andrzej Morawski, Jarosław Więckowski, Andrzej Wiśniewski, Shiv J. Singh

Abstract: A series of FeSe0.5Te0.5 bulk samples have been prepared through the high gas pressure and high-temperature synthesis (HP-HTS) method to optimize the growth conditions, for the first time and investigated for their superconducting properties using structural, microstructure, transport, and magnetic measurements to reach the final conclusions. Ex-situ and in-situ processes are used to prepare bulk… ▽ More A series of FeSe0.5Te0.5 bulk samples have been prepared through the high gas pressure and high-temperature synthesis (HP-HTS) method to optimize the growth conditions, for the first time and investigated for their superconducting properties using structural, microstructure, transport, and magnetic measurements to reach the final conclusions. Ex-situ and in-situ processes are used to prepare bulk samples under a range of growth pressures using Ta-tube and without Tatube. The parent compound synthesized by convenient synthesis method at ambient pressure (CSP) exhibits a superconducting transition temperature of 14.8 K. Our data demonstrate that the prepared FeSe0.5Te0.5 sealed in a Ta-tube is of better quality than the samples without a Ta-tube, and the optimum growth conditions (500 MPa, 600°C for 1 h) are favourable for the development of the tetragonal FeSe0.5Te0.5 phase. The optimum bulk FeSe0.5Te0.5 depicts a higher transition temperature of 17.3 K and a high critical current density of the order of >10^4 A/cm^2 at 0 T, which is improved over the entire magnetic field range and almost twice higher than the parent compound prepared through CSP. Our studies confirm that the high-pressure synthesis method is a highly efficient way to improve the superconducting transition, grain connectivity, sample density, and also pinning properties of a superconductor. △ Less

Submitted 2 August, 2023; originally announced August 2023.

Journal ref: Materials 2023, 16(15), 5358

Artificial Intelligence for the Electron Ion Collider (AI4EIC)

Authors: C. Allaire, R. Ammendola, E. -C. Aschenauer, M. Balandat, M. Battaglieri, J. Bernauer, M. Bondì, N. Branson, T. Britton, A. Butter, I. Chahrour, P. Chatagnon, E. Cisbani, E. W. Cline, S. Dash, C. Dean, W. Deconinck, A. Deshpande, M. Diefenthaler, R. Ent, C. Fanelli, M. Finger, M. Finger, Jr., E. Fol, S. Furletov , et al. (70 additional authors not shown)

Abstract: The Electron-Ion Collider (EIC), a state-of-the-art facility for studying the strong force, is expected to begin commissioning its first experiments in 2028. This is an opportune time for artificial intelligence (AI) to be included from the start at this facility and in all phases that lead up to the experiments. The second annual workshop organized by the AI4EIC working group, which recently took… ▽ More The Electron-Ion Collider (EIC), a state-of-the-art facility for studying the strong force, is expected to begin commissioning its first experiments in 2028. This is an opportune time for artificial intelligence (AI) to be included from the start at this facility and in all phases that lead up to the experiments. The second annual workshop organized by the AI4EIC working group, which recently took place, centered on exploring all current and prospective application areas of AI for the EIC. This workshop is not only beneficial for the EIC, but also provides valuable insights for the newly established ePIC collaboration at EIC. This paper summarizes the different activities and R&D projects covered across the sessions of the workshop and provides an overview of the goals, approaches and strategies regarding AI/ML in the EIC community, as well as cutting-edge techniques currently studied in other experiments. △ Less

Submitted 17 July, 2023; originally announced July 2023.

Comments: 27 pages, 11 figures, AI4EIC workshop, tutorials and hackathon

Implementing an electronic sideband offset lock for precision spectroscopy in radium

Authors: Tenzin Rabga, Kevin G. Bailey, Michael Bishof, Donald W. Booth, Matthew R. Dietrich, John P. Greene, Peter Mueller, Thomas P. O'Connor, Jaideep T. Singh

Abstract: We demonstrate laser frequency stabilization with at least 6 GHz of offset tunability using an in-phase/quadrature (IQ) modulator to generate electronic sidebands (ESB) on a titanium sapphire laser at 714 nm and we apply this technique to the precision spectroscopy of $^{226}$Ra, and $^{225}$Ra. By locking the laser to a single resonance of a high finesse optical cavity and adjusting the lock offs… ▽ More We demonstrate laser frequency stabilization with at least 6 GHz of offset tunability using an in-phase/quadrature (IQ) modulator to generate electronic sidebands (ESB) on a titanium sapphire laser at 714 nm and we apply this technique to the precision spectroscopy of $^{226}$Ra, and $^{225}$Ra. By locking the laser to a single resonance of a high finesse optical cavity and adjusting the lock offset, we determine the frequency difference between the magneto-optical trap (MOT) transitions in the two isotopes to be $2630.0\pm0.3$ MHz, a factor of 29 more precise than the previously available data. Using the known value of the hyperfine splitting of the $^{3}P_{1}$ level, we calculate the isotope shift for the $^{1}S_{0}$ to $^{3}P_{1}$ transition to be $2267.0\pm2.2$ MHz, which is a factor of 8 more precise than the best available value. Our technique could be applied to countless other atomic systems to provide unprecedented precision in isotope shift spectroscopy and other relative frequency comparisons. △ Less

Submitted 15 September, 2023; v1 submitted 14 July, 2023; originally announced July 2023.

Heterophased grain boundary-rich superparamagnetic Iron Oxides/carbon composite for Cationic and Anionic Dye Removal

Authors: K Priyananda Singh, Boris Wareppam, Raghavendra K G, N. Joseph Singh, A. C. de Oliveira, V. K. Garg, Subrata Ghosh, L. Herojit Singh

Abstract: Iron oxide-based nanostructures receive significant attention as an efficient adsorbent for organic dyes removal. The removal properties have strong dependency on the stoichiometry, phases, reactive edges, defect states etc present in the iron-oxides nanostructures. Herein, iron oxide/carbon composite with well-defined heterophased grain boundaries is synthesized by simple precipitation method and… ▽ More Iron oxide-based nanostructures receive significant attention as an efficient adsorbent for organic dyes removal. The removal properties have strong dependency on the stoichiometry, phases, reactive edges, defect states etc present in the iron-oxides nanostructures. Herein, iron oxide/carbon composite with well-defined heterophased grain boundaries is synthesized by simple precipitation method and followed by calcination. The local structure, spin dynamics and magnetic properties of heterophased iron oxides/carbon composite are thoroughly investigated to explore its cationic and anionic dye removal capability. To validate the effectivity of the presence of heterogeneous grain boundaries, iron oxide/carbon nanocomposite with homogeneous grain boundaries is also examined. It was found that the hetero-phased iron oxide/carbon showed removal capacity of 35.45 mg g-1 and 45.84 mg g-1 for cationic (Crystal Violet) and anionic (Congo Red) dyes, respectively as compared to that of as-synthesised imidazole-capped superparamagnetic α-Fe2O3 (25.11 mg g-1 and 40.44 mg g-1, respectively) and homophased iron oxide/carbon nanocomposite (9.41 mg g-1 and 5.43 mg g-1, respectively). The plausible mechanism on the local structural evolution of the heterophase in the course of calcination and increase of the removal capacity is discussed. A detailed dye adsorption investigation is presented including the adsorption kinetic study. The pseudo-second order kinetic model is found to be an appropriate one and suggests that the chemisorption is dominant factor leading to adsorption of dyes. Whereas Weber-Morris model indicate the strong influence of boundary layers of nanocomposite on the adsorption process. △ Less

Submitted 5 July, 2023; originally announced July 2023.

Comments: 26 pages, 7 figures, 2 schemes, 4 tables

Journal ref: Advanced Engineering Materials 2023

Numerical Investigation of Water Entry of Hydrophobic Spheres

Authors: Jaspreet Singh, Anikesh Pal

Abstract: We perform numerical simulations to study the dynamics of the entry of hydrophobic spheres in a pool of water using ANSYS. To track the air-water interface during the translation of the sphere in the pool of water, we use the volume of fluid (VOF) model. The continuum surface force (CSF) method computes the surface tension force. To simulate the hydrophobic surface properties, we also include wall… ▽ More We perform numerical simulations to study the dynamics of the entry of hydrophobic spheres in a pool of water using ANSYS. To track the air-water interface during the translation of the sphere in the pool of water, we use the volume of fluid (VOF) model. The continuum surface force (CSF) method computes the surface tension force. To simulate the hydrophobic surface properties, we also include wall adhesion. We perform simulations with different diameters and impact speeds of the sphere. Our simulations capture the formation of different types of air cavities, pinch-offs of these cavities, and other finer details similar to the experiments performed at the same parameters. Finally, we compare the coefficient of drag among the different hydrophobic cases. We further perform simulations of hydrophilic spheres impacting the pool of water and compare the drag coefficient with the analogous hydrophobic cases. We conclude that the spheres with hydrophobic surfaces have a lower drag coefficient than their hydrophilic counterparts. This lower drag of the hydrophobic spheres is attributed to the formation of the air cavity by the hydrophobic surfaces while translating through the pool of water, which reduces the area of the sphere in contact with water. In contrast, no such air cavity forms in the case of hydrophilic spheres. △ Less

Submitted 27 June, 2023; originally announced June 2023.

Lessons learned after three years of SPIDER operation and the first MITICA integrated tests

Authors: D. Marcuzzi, V. Toigo, M. Boldrin, G. Chitarin, S. Dal Bello, L. Grando, A. Luchetta, R. Pasqualotto, M. Pavei, G. Serianni, L. Zanotto, R. Agnello, P. Agostinetti, M. Agostini, D. Aprile, M. Barbisan, M. Battistella, G. Berton, M. Bigi, M. Brombin, V. Candela, V. Candeloro, A. Canton, R. Casagrande, C. Cavallini , et al. (117 additional authors not shown)

Abstract: ITER envisages the use of two heating neutral beam injectors plus an optional one as part of the auxiliary heating and current drive system. The 16.5 MW expected neutral beam power per injector is several notches higher than worldwide existing facilities. A Neutral Beam Test Facility (NBTF) was established at Consorzio RFX, exploiting the synergy of two test beds, SPIDER and MITICA. SPIDER is dedi… ▽ More ITER envisages the use of two heating neutral beam injectors plus an optional one as part of the auxiliary heating and current drive system. The 16.5 MW expected neutral beam power per injector is several notches higher than worldwide existing facilities. A Neutral Beam Test Facility (NBTF) was established at Consorzio RFX, exploiting the synergy of two test beds, SPIDER and MITICA. SPIDER is dedicated to developing and characterizing large efficient negative ion sources at relevant parameters in ITER-like conditions: source and accelerator located in the same vacuum where the beam propagates, immunity to electromagnetic interferences of multiple radio-frequency (RF) antennas, avoidance of RF-induced discharges on the outside of the source. Three years of experiments on SPIDER have addressed to the necessary design modifications to enable full performances. The source is presently under a long shut-down phase to incorporate learnings from the experimental campaign. Parallelly, developments on MITICA, the full-scale prototype of the ITER NBI featuring a 1 MV accelerator and ion neutralization, are underway including manufacturing of in-vessel components, while power supplies and auxiliary plants are already under final testing and commissioning. Integration, commissioning and tests of the 1MV power supplies are essential for this first-of-kind system, unparalleled both in research and industry field. The integrated test to confirm 1MV output by combining invertor systems, DC generators and transmission lines extracted errors/accidents in some components. To realize a concrete system for ITER, solutions for the repair and the improvement of the system were developed. Hence, NBTF is emerging as a necessary facility, due to the large gap with existing injectors, effectively dedicated to identify issues and find solutions to enable successful ITER NBI operations in a time bound fashion. △ Less

Submitted 4 April, 2023; originally announced April 2023.

Journal ref: Fusion Engineering and Design 191 (2023) 113590

Electromagnetic modeling and science reach of DMRadio-m$^3$

Authors: DMRadio Collaboration, A. AlShirawi, V. Ankel, C. Bartram, J. Begin, C. Bell, J. N. Benabou, L. Brouwer, S. Chaudhuri, H. -M. Cho, J. Corbin, W. Craddock, S. Cuadra, A. Droster, J. Echevers, J. W. Foster, J. T. Fry, P. W. Graham, R. Henning, K. D. Irwin, F. Kadribasic, Y. Kahn, A. Keller, R. Kolevatov, S. Kuenstner , et al. (23 additional authors not shown)

Abstract: DMRadio-m$^3$ is an experiment that is designed to be sensitive to KSVZ and DFSZ QCD axion models in the 10--200\,MHz (41 neV$/c^2$ -- 0.83 $μ$eV/$c^2$) range. The experiment uses a solenoidal dc magnetic field to convert an axion dark-matter signal to an ac electromagnetic response in a coaxial copper pickup. The current induced by this axion signal is measured by dc SQUIDs. In this work, we pres… ▽ More DMRadio-m$^3$ is an experiment that is designed to be sensitive to KSVZ and DFSZ QCD axion models in the 10--200\,MHz (41 neV$/c^2$ -- 0.83 $μ$eV/$c^2$) range. The experiment uses a solenoidal dc magnetic field to convert an axion dark-matter signal to an ac electromagnetic response in a coaxial copper pickup. The current induced by this axion signal is measured by dc SQUIDs. In this work, we present the electromagnetic modeling of the response of the experiment to an axion signal over the full frequency range of DMRadio-m$^3$, which extends from the low-frequency, lumped-element limit to a regime where the axion Compton wavelength is only a factor of two larger than the detector size. With these results, we determine the live time and sensitivity of the experiment. The primary science goal of sensitivity to DFSZ axions across 30--200 MHz can be achieved with a $3σ$ live scan time of 2.9 years. △ Less

Submitted 6 May, 2025; v1 submitted 27 February, 2023; originally announced February 2023.

Comments: 14 pages, 7 figures. Updated scan times due to new SQUID noise numbers. Prepared for submission to journal

Opportunities for Fundamental Physics Research with Radioactive Molecules

Authors: Gordon Arrowsmith-Kron, Michail Athanasakis-Kaklamanakis, Mia Au, Jochen Ballof, Robert Berger, Anastasia Borschevsky, Alexander A. Breier, Fritz Buchinger, Dmitry Budker, Luke Caldwell, Christopher Charles, Nike Dattani, Ruben P. de Groote, David DeMille, Timo Dickel, Jacek Dobaczewski, Christoph E. Düllmann, Ephraim Eliav, Jon Engel, Mingyu Fan, Victor Flambaum, Kieran T. Flanagan, Alyssa Gaiser, Ronald Garcia Ruiz, Konstantin Gaul , et al. (37 additional authors not shown)

Abstract: Molecules containing short-lived, radioactive nuclei are uniquely positioned to enable a wide range of scientific discoveries in the areas of fundamental symmetries, astrophysics, nuclear structure, and chemistry. Recent advances in the ability to create, cool, and control complex molecules down to the quantum level, along with recent and upcoming advances in radioactive species production at seve… ▽ More Molecules containing short-lived, radioactive nuclei are uniquely positioned to enable a wide range of scientific discoveries in the areas of fundamental symmetries, astrophysics, nuclear structure, and chemistry. Recent advances in the ability to create, cool, and control complex molecules down to the quantum level, along with recent and upcoming advances in radioactive species production at several facilities around the world, create a compelling opportunity to coordinate and combine these efforts to bring precision measurement and control to molecules containing extreme nuclei. In this manuscript, we review the scientific case for studying radioactive molecules, discuss recent atomic, molecular, nuclear, astrophysical, and chemical advances which provide the foundation for their study, describe the facilities where these species are and will be produced, and provide an outlook for the future of this nascent field. △ Less

Submitted 4 February, 2023; originally announced February 2023.

Journal ref: Rep. Prog. Phys. 87 084301 (2024)

Earthquake Magnitude and b value prediction model using Extreme Learning Machine

Authors: Gunbir Singh Baveja, Jaspreet Singh

Abstract: Earthquake prediction has been a challenging research area for many decades, where the future occurrence of this highly uncertain calamity is predicted. In this paper, several parametric and non-parametric features were calculated, where the non-parametric features were calculated using the parametric features. $8$ seismic features were calculated using Gutenberg-Richter law, the total recurrence,… ▽ More Earthquake prediction has been a challenging research area for many decades, where the future occurrence of this highly uncertain calamity is predicted. In this paper, several parametric and non-parametric features were calculated, where the non-parametric features were calculated using the parametric features. $8$ seismic features were calculated using Gutenberg-Richter law, the total recurrence, and the seismic energy release. Additionally, criterions such as Maximum Relevance and Maximum Redundancy were applied to choose the pertinent features. These features along with others were used as input for an Extreme Learning Machine (ELM) Regression Model. Magnitude and time data of $5$ decades from the Assam-Guwahati region were used to create this model for magnitude prediction. The Testing Accuracy and Testing Speed were computed taking the Root Mean Squared Error (RMSE) as the parameter for evaluating the mode. As confirmed by the results, ELM shows better scalability with much faster training and testing speed (up to a thousand times faster) than traditional Support Vector Machines. The testing RMSE came out to be around $0.097$. To further test the model's robustness -- magnitude-time data from California was used to calculate the seismic indicators which were then fed into an ELM and then tested on the Assam-Guwahati region. The model proves to be robust and can be implemented in early warning systems as it continues to be a major part of Disaster Response and management. △ Less

Submitted 23 January, 2023; originally announced January 2023.

Comments: 11 pages, 13 figures, 2 tables

ACM Class: F.2.2, I.2.7

Highly-parallelized simulation of a pixelated LArTPC on a GPU

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, Z. Ahmad, J. Ahmed, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, C. Alt, A. Alton, R. Alvarez, P. Amedo, J. Anderson , et al. (1282 additional authors not shown)

Abstract: The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we pr… ▽ More The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we present the first implementation of a full microphysical simulator of a liquid argon time projection chamber (LArTPC) equipped with light readout and pixelated charge readout, developed for the DUNE Near Detector. The software is implemented with an end-to-end set of GPU-optimized algorithms. The algorithms have been written in Python and translated into CUDA kernels using Numba, a just-in-time compiler for a subset of Python and NumPy instructions. The GPU implementation achieves a speed up of four orders of magnitude compared with the equivalent CPU version. The simulation of the current induced on $10^3$ pixels takes around 1 ms on the GPU, compared with approximately 10 s on the CPU. The results of the simulation are compared against data from a pixel-readout LArTPC prototype. △ Less

Submitted 28 February, 2023; v1 submitted 19 December, 2022; originally announced December 2022.

Comments: 26 pages, 15 figures

Report number: FERMILAB-PUB-22-926-LBNF

Journal ref: JINST 2023 18 P04034

Relation between Dips of Prestack Time Migrated & Unmigrated Data

Authors: Jagmeet Singh

Abstract: Relation between dips of post-stack migrated and unmigrated data is well known and easy to derive. A similar relation between dips of pre-stack migrated and unmigrated constant offset data is not available in literature and is calculated here. Since migration outputs for multiple offsets are available, the formula valid for all offsets gives us a tool to check the correctness of the migration velo… ▽ More Relation between dips of post-stack migrated and unmigrated data is well known and easy to derive. A similar relation between dips of pre-stack migrated and unmigrated constant offset data is not available in literature and is calculated here. Since migration outputs for multiple offsets are available, the formula valid for all offsets gives us a tool to check the correctness of the migration velocity model. The formula is also used to study how a reflector with constant dip gets curved in constant offset gathers. Further, a handy formula for prestack migration aperture is derived and its variations with offset, depth and dip angle studied. △ Less

Submitted 14 December, 2022; v1 submitted 13 December, 2022; originally announced December 2022.

Comments: 11 pages, 7 figures, to be submitted