-
Mixed modeling for large-eddy simulation: The single-layer and two-layer minimum-dissipation-Bardina models
Authors:
L. B. Streher,
M. H. Silvis,
P. Cifani,
R. W. C. P. Verstappen
Abstract:
Predicting the behavior of turbulent flows using large-eddy simulation requires modeling of the subgrid-scale stress tensor. This tensor can be approximated using mixed models, which combine the dissipative nature of functional models with the capability of structural models to approximate out-of-equilibrium effects. We propose a mathematical basis to mix (functional) eddy-viscosity models with th…
▽ More
Predicting the behavior of turbulent flows using large-eddy simulation requires modeling of the subgrid-scale stress tensor. This tensor can be approximated using mixed models, which combine the dissipative nature of functional models with the capability of structural models to approximate out-of-equilibrium effects. We propose a mathematical basis to mix (functional) eddy-viscosity models with the (structural) Bardina model. By taking an anisotropic minimum-dissipation (AMD) model for the eddy viscosity, we obtain the (single-layer) AMD-Bardina model. In order to also obtain a physics-conforming model for wall-bounded flows, we further develop this mixed model into a two-layer approach: the near-wall region is parameterized with the AMD-Bardina model, whereas the outer region is computed with the Bardina model. The single-layer and two-layer AMD-Bardina models are tested in turbulent channel flows at various Reynolds numbers, and improved predictions are obtained when the mixed models are applied in comparison to the computations with the AMD and Bardina models alone. The results obtained with the two-layer AMD-Bardina model are particularly remarkable: both first- and second-order statistics are extremely well predicted and even the inflection of the mean velocity in the channel center is captured. Hence, a very promising model is obtained for large-eddy simulations of wall-bounded turbulent flows at moderate and high Reynolds numbers.
△ Less
Submitted 7 January, 2021; v1 submitted 15 June, 2020;
originally announced June 2020.
-
A nonlinear subgrid-scale model for large-eddy simulations of rotating turbulent flows
Authors:
Maurits H. Silvis,
H. Jane Bae,
F. Xavier Trias,
Mahdi Abkar,
Roel Verstappen
Abstract:
Rotating turbulent flows form a challenging test case for large-eddy simulation (LES). We, therefore, propose and validate a new subgrid-scale (SGS) model for such flows. The proposed SGS model consists of a dissipative eddy viscosity term as well as a nondissipative term that is nonlinear in the rate-of-strain and rate-of-rotation tensors. The two corresponding model coefficients are a function o…
▽ More
Rotating turbulent flows form a challenging test case for large-eddy simulation (LES). We, therefore, propose and validate a new subgrid-scale (SGS) model for such flows. The proposed SGS model consists of a dissipative eddy viscosity term as well as a nondissipative term that is nonlinear in the rate-of-strain and rate-of-rotation tensors. The two corresponding model coefficients are a function of the vortex stretching magnitude. Therefore, the model is consistent with many physical and mathematical properties of the Navier-Stokes equations and turbulent stresses, and is easy to implement. We determine the two model constants using a nondynamic procedure that takes into account the interaction between the model terms. Using detailed direct numerical simulations (DNSs) and LESs of rotating decaying turbulence and spanwise-rotating plane-channel flow, we reveal that the two model terms respectively account for dissipation and backscatter of energy, and that the nonlinear term improves predictions of the Reynolds stress anisotropy near solid walls. We also show that the new SGS model provides good predictions of rotating decaying turbulence and leads to outstanding predictions of spanwise-rotating plane-channel flow over a large range of rotation rates for both fine and coarse grid resolutions. Moreover, the new nonlinear model performs as well as the dynamic Smagorinsky and scaled anisotropic minimum-dissipation models in LESs of rotating decaying turbulence and outperforms these models in LESs of spanwise-rotating plane-channel flow, without requiring (dynamic) adaptation or near-wall damping of the model constants.
△ Less
Submitted 29 April, 2019;
originally announced April 2019.
-
Mixed modeling for large-eddy simulation: the minimum-dissipation-bardina model
Authors:
Larissa B. Streher,
Maurits H. Silvis,
Roel Verstappen
Abstract:
The Navier-Stokes equations describe the motion of viscous fluids. In order to predict turbulent flows with reasonable computational time and accuracy, these equations are spatially filtered according to the large-eddy simulation (LES) approach. The current work applies a volume filtering procedure according to Schumann (1975). To demonstrate the procedure the Schumann filter is first applied to a…
▽ More
The Navier-Stokes equations describe the motion of viscous fluids. In order to predict turbulent flows with reasonable computational time and accuracy, these equations are spatially filtered according to the large-eddy simulation (LES) approach. The current work applies a volume filtering procedure according to Schumann (1975). To demonstrate the procedure the Schumann filter is first applied to a convection-diffusion equation. The Schumann filter results in volume-averaged equations, which are not closed. To close these equations a model is introduced, which represents the interaction between the resolved scales and the small subgrid scales. Here, the anisotropic minimum-dissipation model of Rozema et al. (2015) is considered. The interpolation scheme necessary to evaluate the convective flux at the cell faces can be viewed as a second filter. Thus, the convection term of the filtered convection-diffusion equation can be interpreted as a double-filtered term. This term is approximated by the scale similarity model of Bardina et al. (1983). Thus, a mixed minimum-dissipation-Bardina model is obtained. Secondly, the mathematical methodology is extended to the Navier-Stokes equations. Here, the pressure term is analyzed separately and added to the convection-diffusion equation as a sink term. Finally, spatially filtered Navier-Stokes equations that depend on both the anisotropic minimum-dissipation (AMD) model proposed by Rozema et al. (2015) and the scale similarity model of Bardina et al. (1983) are obtained. Hence, a mathematically consistent method of mixing the AMD model and the Bardina model is achieved.
△ Less
Submitted 29 June, 2018;
originally announced June 2018.
-
A new subgrid characteristic length for turbulence simulations on anisotropic grids
Authors:
F. X. Trias,
A. Gorobets,
M. H. Silvis,
R. W. C. P. Verstappen,
A. Oliva
Abstract:
Direct numerical simulations of the incompressible Navier-Stokes equations are not feasible yet for most practical turbulent flows. Therefore, dynamically less complex mathematical formulations are necessary for coarse-grained simulations. In this regard, eddy-viscosity models for Large-Eddy Simulation (LES) are probably the most popular example thereof. This type of models requires the calculatio…
▽ More
Direct numerical simulations of the incompressible Navier-Stokes equations are not feasible yet for most practical turbulent flows. Therefore, dynamically less complex mathematical formulations are necessary for coarse-grained simulations. In this regard, eddy-viscosity models for Large-Eddy Simulation (LES) are probably the most popular example thereof. This type of models requires the calculation of a subgrid characteristic length which is usually associated with the local grid size. For isotropic grids this is equal to the mesh step. However, for anisotropic or unstructured grids, such as the pancake-like meshes that are often used to resolve near-wall turbulence or shear layers, a consensus on defining the subgrid characteristic length has not been reached yet despite the fact that it can strongly affect the performance of LES models. In this context, a new definition of the subgrid characteristic length is presented in this work. This flow-dependent length scale is based on the turbulent, or subgrid stress, tensor and its representations on different grids. The simplicity and mathematical properties suggest that it can be a robust definition that minimizes the effects of mesh anisotropies on simulation results. The performance of the proposed subgrid characteristic length is successfully tested for decaying isotropic turbulence and a turbulent channel flow using artificially refined grids. Finally, a simple extension of the method for unstructured meshes is proposed and tested for a turbulent flow around a square cylinder. Comparisons with existing subgrid characteristic length scales show that the proposed definition is much more robust with respect to mesh anisotropies and has a great potential to be used in complex geometries where highly skewed (unstructured) meshes are present.
△ Less
Submitted 1 December, 2017; v1 submitted 8 November, 2017;
originally announced November 2017.
-
Physical consistency of subgrid-scale models for large-eddy simulation of incompressible turbulent flows
Authors:
Maurits H. Silvis,
Ronald A. Remmerswaal,
Roel Verstappen
Abstract:
We study the construction of subgrid-scale models for large-eddy simulation of incompressible turbulent flows. In particular, we aim to consolidate a systematic approach of constructing subgrid-scale models, based on the idea that it is desirable that subgrid-scale models are consistent with the mathematical and physical properties of the Navier-Stokes equations and the turbulent stresses. To that…
▽ More
We study the construction of subgrid-scale models for large-eddy simulation of incompressible turbulent flows. In particular, we aim to consolidate a systematic approach of constructing subgrid-scale models, based on the idea that it is desirable that subgrid-scale models are consistent with the mathematical and physical properties of the Navier-Stokes equations and the turbulent stresses. To that end, we first discuss in detail the symmetries of the Navier-Stokes equations, and the near-wall scaling behavior, realizability and dissipation properties of the turbulent stresses. We furthermore summarize the requirements that subgrid-scale models have to satisfy in order to preserve these important mathematical and physical properties. In this fashion, a framework of model constraints arises that we apply to analyze the behavior of a number of existing subgrid-scale models that are based on the local velocity gradient. We show that these subgrid-scale models do not satisfy all the desired properties, after which we explain that this is partly due to incompatibilities between model constraints and limitations of velocity-gradient-based subgrid-scale models. However, we also reason that the current framework shows that there is room for improvement in the properties and, hence, the behavior of existing subgrid-scale models. We furthermore show how compatible model constraints can be combined to construct new subgrid-scale models that have desirable properties built into them. We provide a few examples of such new models, of which a new model of eddy viscosity type, that is based on the vortex stretching magnitude, is successfully tested in large-eddy simulations of decaying homogeneous isotropic turbulence and turbulent plane-channel flow.
△ Less
Submitted 27 January, 2017; v1 submitted 31 August, 2016;
originally announced August 2016.
-
Physically-consistent subgrid-scale models for large-eddy simulation of incompressible turbulent flows
Authors:
Maurits H. Silvis,
Roel Verstappen
Abstract:
Assuming a general constitutive relation for the turbulent stresses in terms of the local large-scale velocity gradient, we constructed a class of subgrid-scale models for large-eddy simulation that are consistent with important physical and mathematical properties. In particular, they preserve symmetries of the Navier-Stokes equations and exhibit the proper near-wall scaling. They furthermore sho…
▽ More
Assuming a general constitutive relation for the turbulent stresses in terms of the local large-scale velocity gradient, we constructed a class of subgrid-scale models for large-eddy simulation that are consistent with important physical and mathematical properties. In particular, they preserve symmetries of the Navier-Stokes equations and exhibit the proper near-wall scaling. They furthermore show desirable dissipation behavior and are capable of describing nondissipative effects. We provided examples of such physically-consistent models and showed that existing subgrid-scale models do not all satisfy the desired properties.
△ Less
Submitted 27 October, 2015;
originally announced October 2015.
