Showing 1–18 of 18 results for author: Silver, Y

Atmospheric muon flux suppression at potential new low-radiation underground physics laboratory in Israel

Authors: Nadav Hargittai, Igor Zolkin, Yiftah Silver, Yan Benhammou, Gilad Mizrachi, Hagar Landsman, Erez Etzion, Ran Budnik

Abstract: The residual atmospheric muon flux was measured at a candidate site for a new underground, low-radiation physics laboratory beneath the Kokhav HaYarden national park in Israel. Located inside the tunnels of a hydroelectric pumped-storage facility operating since 2024, the proposed site benefits from a vertical rock overburden of 361 meters, large potential floorspace, and easy access by road. A mu… ▽ More The residual atmospheric muon flux was measured at a candidate site for a new underground, low-radiation physics laboratory beneath the Kokhav HaYarden national park in Israel. Located inside the tunnels of a hydroelectric pumped-storage facility operating since 2024, the proposed site benefits from a vertical rock overburden of 361 meters, large potential floorspace, and easy access by road. A muon hodoscope of vertically stacked wide-area $144 \times 60 \times 1.2 $ cm$^3$ plastic scintillator plates was employed to measure the suppression in the integrated muon flux at the site as compared with above ground at sea level. Data-taking took place in mid-August of 2024 for several days and was split into South-North and West-East orientations to account for the directional acceptances due to the geometry of the detector. The suppression factor is reported at $4456 \pm 77$, expressed as $3.75 \pm 0.06 \times 10^{-6}$ cm$^{-2}$ s$^{-1}$ in absolute terms, corresponding to an effective overburden of roughly $873$ m.w.e.. A deeper location at the site may also be available, but it could not be reached at this time. Furthermore, the asymmetric topography of the mountain above and its muon shadow are clearly visible in the angular data. Finally, auxiliary environmental measurements recorded low background radon activity at $28.3 \pm 14.0$ Bq m$^{-3}$. The experimental campaign thus succeeded in demonstrating the viability of the site's working conditions for future scientific research. △ Less

Submitted 21 April, 2025; originally announced April 2025.

First Demonstration of Underground Muon Imaging at an Archaeological Site in Ancient Jerusalem

Authors: Yan Benhammou, Erez Etzion, Yuval Gadot, Gilad Mizrachi, Oded Lipschits, Yiftah Shalev, Yiftah Silver, Amir Weissbein, Igor Zolkin

Abstract: We present a novel underground imaging system that utilizes cosmic-ray muons to explore the subsurface environment at the City of David archaeological site in ancient Jerusalem. This report details the initial findings from measurements conducted at a large cistern, commonly called "Jeremiah's cistern" (referenced in Jeremiah 38:6). The system aims to locate and map hidden voids and structural ano… ▽ More We present a novel underground imaging system that utilizes cosmic-ray muons to explore the subsurface environment at the City of David archaeological site in ancient Jerusalem. This report details the initial findings from measurements conducted at a large cistern, commonly called "Jeremiah's cistern" (referenced in Jeremiah 38:6). The system aims to locate and map hidden voids and structural anomalies within the overburden. Our primary outcome is the derivation of the angular ground depth, which serves as a proxy for understanding the integrated density distribution of the overburden. This work represents a significant interdisciplinary effort to deepen our understanding of this historically important site. △ Less

Submitted 3 April, 2025; originally announced April 2025.

Comments: Submitted to Journal of Applied Physics

MATHUSLA: An External Long-Lived Particle Detector to Maximize the Discovery Potential of the HL-LHC

Authors: Branden Aitken, Cristiano Alpigiani, Juan Carlos Arteaga-Velázquez, Mitchel Baker, Kincso Balazs, Jared Barron, Brian Batell, Austin Batz, Yan Benhammou, Tamara Alice Bud, Karen Salomé Caballero-Mora, John Paul Chou, David Curtin, Albert de Roeck, Miriam Diamond, Mariia Didenko, Keith R. Dienes, William Dougherty, Liam Andrew Dougherty, Marco Drewes, Sameer Erramilli, Erez Etzion, Arturo Fernández Téllez, Grace Finlayson, Oliver Fischer , et al. (48 additional authors not shown)

Abstract: We present the current status of the MATHUSLA (MAssive Timing Hodoscope for Ultra-Stable neutraL pArticles) long-lived particle (LLP) detector at the HL-LHC, covering the design, fabrication and installation at CERN Point 5. MATHUSLA40 is a 40 m-scale detector with an air-filled decay volume that is instrumented with scintillator tracking detectors, to be located near CMS. Its large size, close pr… ▽ More We present the current status of the MATHUSLA (MAssive Timing Hodoscope for Ultra-Stable neutraL pArticles) long-lived particle (LLP) detector at the HL-LHC, covering the design, fabrication and installation at CERN Point 5. MATHUSLA40 is a 40 m-scale detector with an air-filled decay volume that is instrumented with scintillator tracking detectors, to be located near CMS. Its large size, close proximity to the CMS interaction point and about 100 m of rock shielding from LHC backgrounds allows it to detect LLP production rates and lifetimes that are one to two orders of magnitude beyond the ultimate reach of the LHC main detectors. This provides unique sensitivity to many LLP signals that are highly theoretically motivated, due to their connection to the hierarchy problem, the nature of dark matter, and baryogenesis. Data taking is projected to commence with the start of HL-LHC operations. We summarize the new 40m design for the detector that was recently presented in the MATHUSLA Conceptual Design Report, alongside new realistic background and signal simulations that demonstrate high efficiency for the main target LLP signals in a background-free HL-LHC search. We argue that MATHUSLA's uniquely robust expansion of the HL-LHC physics reach is a crucial ingredient in CERN's mission to search for new physics and characterize the Higgs boson with precision. △ Less

Submitted 1 April, 2025; originally announced April 2025.

Comments: Input to the 2026 update of the European Strategy for Particle Physics. 10 pages + references. 7 figures, 2 tables. This submission draws heavily from, and acts as an executive summary of, the MATHUSLA CDR (arXiv:2503.20893), but makes additional points and is a standalone separate document. arXiv admin note: substantial text overlap with arXiv:2503.20893

Conceptual Design Report for the MATHUSLA Long-Lived Particle Detector near CMS

Authors: Branden Aitken, Cristiano Alpigiani, Juan Carlos Arteaga-Velázquez, Mitchel Baker, Kincso Balazs, Jared Barron, Brian Batell, Austin Batz, Yan Benhammou, Tamara Alice Bud, Karen Salomé Caballero-Mora, John Paul Chou, David Curtin, Albert de Roeck, Miriam Diamond, Mariia Didenko, Keith R. Dienes, William Dougherty, Liam Andrew Dougherty, Marco Drewes, Sameer Erramilli, Erez Etzion, Arturo Fernández Téllez, Grace Finlayson, Oliver Fischer , et al. (48 additional authors not shown)

Abstract: We present the Conceptual Design Report (CDR) for the MATHUSLA (MAssive Timing Hodoscope for Ultra-Stable neutraL pArticles) long-lived particle detector at the HL-LHC, covering the design, fabrication and installation at CERN Point 5. MATHUSLA is a 40 m-scale detector with an air-filled decay volume that is instrumented with scintillator tracking detectors, to be located near CMS. Its large size,… ▽ More We present the Conceptual Design Report (CDR) for the MATHUSLA (MAssive Timing Hodoscope for Ultra-Stable neutraL pArticles) long-lived particle detector at the HL-LHC, covering the design, fabrication and installation at CERN Point 5. MATHUSLA is a 40 m-scale detector with an air-filled decay volume that is instrumented with scintillator tracking detectors, to be located near CMS. Its large size, close proximity to the CMS interaction point and about 100 m of rock shielding from HL-LHC backgrounds allows it to detect LLP production rates and lifetimes that are one to two orders of magnitude beyond the ultimate sensitivity of the HL-LHC main detectors for many highly motivated LLP signals. Data taking is projected to commence with the start of HL-LHC operations. We present a new 40m design for the detector: its individual scintillator bars and wavelength-shifting fibers, their organization into tracking layers, tracking modules, tower modules and the veto detector; define a high-level design for the supporting electronics, DAQ and trigger system, including supplying a hardware trigger signal to CMS to record the LLP production event; outline computing systems, civil engineering and safety considerations; and present preliminary cost estimates and timelines for the project. We also conduct detailed simulation studies of the important cosmic ray and HL-LHC muon backgrounds, implementing full track/vertex reconstruction and background rejection, to ultimately demonstrate high signal efficiency and $\ll 1$ background event in realistic LLP searches for the main physics targets at MATHUSLA. This sensitivity is robust with respect to detector design or background simulation details. Appendices provide various supplemental information. △ Less

Submitted 26 March, 2025; originally announced March 2025.

Comments: 71 pages, 28 figures, 5 tables

Muon Detector for Underground Tomography

Authors: Yan Benhammou, Erez Etzion, Gilad Mizrachi, Meny Raviv Moshe, Yiftah Silver, Igor Zolkin

Abstract: We utilise muons from cosmic ray to explore hidden underground archaeological structures. Presented here is the design, simulation studies and first laboratory results of a compact, scintillators based, cosmic ray muon telescope for underground muon radiography. We utilise muons from cosmic ray to explore hidden underground archaeological structures. Presented here is the design, simulation studies and first laboratory results of a compact, scintillators based, cosmic ray muon telescope for underground muon radiography. △ Less

Submitted 7 May, 2022; originally announced May 2022.

Comments: 10 figures, submitted for publication

An Update to the Letter of Intent for MATHUSLA: Search for Long-Lived Particles at the HL-LHC

Authors: Cristiano Alpigiani, Juan Carlos Arteaga-Velázquez, Austin Ball, Liron Barak, Jared Barron, Brian Batell, James Beacham, Yan Benhammo, Karen Salomé Caballero-Mora, Paolo Camarri, Roberto Cardarelli, John Paul Chou, Wentao Cui, David Curtin, Miriam Diamond, Keith R. Dienes, Liam Andrew Dougherty, Giuseppe Di Sciascio, Marco Drewes, Erez Etzion, Rouven Essig, Jared Evans, Arturo Fernández Téllez, Oliver Fischer, Jim Freeman , et al. (58 additional authors not shown)

Abstract: We report on recent progress in the design of the proposed MATHUSLA Long Lived Particle (LLP) detector for the HL-LHC, updating the information in the original Letter of Intent (LoI), see CDS:LHCC-I-031, arXiv:1811.00927. A suitable site has been identified at LHC Point 5 that is closer to the CMS Interaction Point (IP) than assumed in the LoI. The decay volume has been increased from 20 m to 25 m… ▽ More We report on recent progress in the design of the proposed MATHUSLA Long Lived Particle (LLP) detector for the HL-LHC, updating the information in the original Letter of Intent (LoI), see CDS:LHCC-I-031, arXiv:1811.00927. A suitable site has been identified at LHC Point 5 that is closer to the CMS Interaction Point (IP) than assumed in the LoI. The decay volume has been increased from 20 m to 25 m in height. Engineering studies have been made in order to locate much of the decay volume below ground, bringing the detector even closer to the IP. With these changes, a 100 m x 100 m detector has the same physics reach for large c$τ$ as the 200 m x 200 m detector described in the LoI and other studies. The performance for small c$τ$ is improved because of the proximity to the IP. Detector technology has also evolved while retaining the strip-like sensor geometry in Resistive Plate Chambers (RPC) described in the LoI. The present design uses extruded scintillator bars read out using wavelength shifting fibers and silicon photomultipliers (SiPM). Operations will be simpler and more robust with much lower operating voltages and without the use of greenhouse gases. Manufacturing is straightforward and should result in cost savings. Understanding of backgrounds has also significantly advanced, thanks to new simulation studies and measurements taken at the MATHUSLA test stand operating above ATLAS in 2018. We discuss next steps for the MATHUSLA collaboration, and identify areas where new members can make particularly important contributions. △ Less

Submitted 3 September, 2020; originally announced September 2020.

Comments: 22 pages + references, 12 Figures

Report number: CERN-LHCC-2020-014, LHCC-I-031-ADD-1

The MATHUSLA Test Stand

Authors: Maf Alidra, Cristiano Alpigiani, Austin Ball, Paolo Camarri, Roberto Cardarelli, John Paul Chou, David Curtin, Erez Etzion, Ali Garabaglu, Brandon Gomes, Roberto Guida, W. Kuykendall, Audrey Kvam, Dragoslav Lazic, H. J. Lubatti, Giovanni Marsella, Gilad Mizrachi, Antonio Policicchio, Mason Proffitt, Joe Rothberg, Rinaldo Santonico, Yiftah Silver, Steffie Ann Thayil, Emma Torro-Pastor, Gordon Watts , et al. (1 additional authors not shown)

Abstract: The rate of muons from LHC $pp$ collisions reaching the surface above the ATLAS interaction point is measured and compared with expected rates from decays of $W$ and $Z$ bosons and $b$- and $c$-quark jets. In addition, data collected during periods without beams circulating in the LHC provide a measurement of the background from cosmic ray inelastic backscattering that is compared to simulation pr… ▽ More The rate of muons from LHC $pp$ collisions reaching the surface above the ATLAS interaction point is measured and compared with expected rates from decays of $W$ and $Z$ bosons and $b$- and $c$-quark jets. In addition, data collected during periods without beams circulating in the LHC provide a measurement of the background from cosmic ray inelastic backscattering that is compared to simulation predictions. Data were recorded during 2018 in a 2.5 $\times$ 2.5 $\times$ 6.5~$\rm{m}^3$ active volume MATHUSLA test stand detector unit consisting of two scintillator planes, one at the top and one at the bottom, which defined the trigger, and six layers of RPCs between them, grouped into three $(x,y)$-measuring layers separated by 1.74 m from each other. Triggers selecting both upward-going tracks and downward-going tracks were used. △ Less

Submitted 9 September, 2020; v1 submitted 5 May, 2020; originally announced May 2020.

Comments: 18 pages, 11 figures, 1 table

Liquid Scintillators for Large Area Tracking System

Authors: Yan Benhammou, Erez Etzion, Gilad Mizrachi, Meny Raviv Moshe, Yiftah Silver

Abstract: We report on studies of non-toxic scintillating liquid useful for large surface detectors. Arrays of liquid scintillators offer a rather simple tool for detecting charged particles traversing a surface and tracking their path through a defined volume. Insertion of wavelength shifting fibres along the liquid scintillating containers significantly improves the light collection at the two ends of the… ▽ More We report on studies of non-toxic scintillating liquid useful for large surface detectors. Arrays of liquid scintillators offer a rather simple tool for detecting charged particles traversing a surface and tracking their path through a defined volume. Insertion of wavelength shifting fibres along the liquid scintillating containers significantly improves the light collection at the two ends of the scintillators. We have demonstrated that we can achieve timing resolution of O(1 ns) allowing good spatial resolution. Liquid scintillators with fibres read by Photo-multipliers or SiPMs provide an inexpensive alternative technology which suits well the requirement of the MATHUSLA experiment tracking system. △ Less

Submitted 29 April, 2020; originally announced April 2020.

Comments: 6 pages, 7 figures, accepted for publication Journal of Physics Communications

Journal ref: J. Phys. Commun. 4 055001 (2020)

A Letter of Intent for MATHUSLA: a dedicated displaced vertex detector above ATLAS or CMS

Authors: Cristiano Alpigiani, Austin Ball, Liron Barak, James Beacham, Yan Benhammo, Tingting Cao, Paolo Camarri, Roberto Cardarelli, Mario Rodriguez-Cahuantzi, John Paul Chou, David Curtin, Miriam Diamond, Giuseppe Di Sciascio, Marco Drewes, Sarah C. Eno, Erez Etzion, Rouven Essig, Jared Evans, Oliver Fischer, Stefano Giagu, Brandon Gomes, Andy Haas, Yuekun Heng, Giuseppe Iaselli, Ken Johns , et al. (39 additional authors not shown)

Abstract: In this Letter of Intent (LOI) we propose the construction of MATHUSLA (MAssive Timing Hodoscope for Ultra-Stable neutraL pArticles), a dedicated large-volume displaced vertex detector for the HL-LHC on the surface above ATLAS or CMS. Such a detector, which can be built using existing technologies with a reasonable budget in time for the HL-LHC upgrade, could search for neutral long-lived particle… ▽ More In this Letter of Intent (LOI) we propose the construction of MATHUSLA (MAssive Timing Hodoscope for Ultra-Stable neutraL pArticles), a dedicated large-volume displaced vertex detector for the HL-LHC on the surface above ATLAS or CMS. Such a detector, which can be built using existing technologies with a reasonable budget in time for the HL-LHC upgrade, could search for neutral long-lived particles (LLPs) with up to several orders of magnitude better sensitivity than ATLAS or CMS, while also acting as a cutting-edge cosmic ray telescope at CERN to explore many open questions in cosmic ray and astro-particle physics. We review the physics motivations for MATHUSLA and summarize its LLP reach for several different possible detector geometries, as well as outline the cosmic ray physics program. We present several updated background studies for MATHUSLA, which help inform a first detector-design concept utilizing modular construction with Resistive Plate Chambers (RPCs) as the primary tracking technology. We present first efficiency and reconstruction studies to verify the viability of this design concept, and we explore some aspects of its total cost. We end with a summary of recent progress made on the MATHUSLA test stand, a small-scale demonstrator experiment currently taking data at CERN Point 1, and finish with a short comment on future work. △ Less

Submitted 2 November, 2018; originally announced November 2018.

Report number: CERN-LHCC-2018-025, LHCC-I-031

First results with a microcavity plasma panel detector

Authors: R. Ball, M. Ben-Moshe, Y. Benhammou, R. Bensimon, J. W. Chapman, M. Davies, E. Etzion, C. Ferretti, P. S. Friedman, D. S. Levin, Y. Silver, R. L. Varner, C. Weaverdyck, B. Zhou

Abstract: A new type of gaseous micropattern particle detector based on a closed-cell microcavity plasma panel sensor is reported. The first device was fabricated with 1 x 1 x 2 mm cells. It has shown very clean signals of 0.6 to 2.5 volt amplitude, fast rise time of approximately 2 ns and FWHM of about 2 ns with very uniform signal shapes across all pixels. From initial measurements with beta particles fro… ▽ More A new type of gaseous micropattern particle detector based on a closed-cell microcavity plasma panel sensor is reported. The first device was fabricated with 1 x 1 x 2 mm cells. It has shown very clean signals of 0.6 to 2.5 volt amplitude, fast rise time of approximately 2 ns and FWHM of about 2 ns with very uniform signal shapes across all pixels. From initial measurements with beta particles from a radioactive source, a maximum pixel efficiency of greater than 95% is calculated, for operation of the detector over a 100V wide span of high voltages (HV). Over this same HV range, the background rate per pixel was measured to be 3 to 4 orders of magnitude lower than the rate with the cell illuminated by the beta source. Pixel-to-pixel count rate uniformity is within 3% and stable within 3% for many days. The time resolution is 2.4 ns, and a very low cell-to-cell crosstalk has been measured between cells separated by 2 mm. △ Less

Submitted 3 December, 2014; v1 submitted 24 July, 2014; originally announced July 2014.

Comments: Submitted to NIM

Journal ref: Nuclear Inst. and Methods in Physics Research, A (2015), pp. 56-59

Development of a plasma panel radiation detector

Authors: R. Ball, J. R. Beene, M. Ben-Moshe, Y. Benhammou, R. Bensimon, J. W. Chapman, E. Etzion, C. Ferretti, P. S. Friedman, D. S. Levin, Y. Silver, R. L. Varner, C. Weaverdyck, R. Wetzel, B. Zhou, T. Anderson, K. McKinny, E. H. Bentefour

Abstract: This article reports on the development and experimental results of commercial plasma display panels adapted for their potential use as micropattern gas radiation detectors. The plasma panel sensors (PPS) design an materials include glass substrates, metal electrodes and inert gas mixtures which provide a physically robust, hermetically-sealed device. Plasma display panels used as detectors were t… ▽ More This article reports on the development and experimental results of commercial plasma display panels adapted for their potential use as micropattern gas radiation detectors. The plasma panel sensors (PPS) design an materials include glass substrates, metal electrodes and inert gas mixtures which provide a physically robust, hermetically-sealed device. Plasma display panels used as detectors were tested with cosmic ray muons, beta rays and gamma rays, protons and thermal neutrons. The results demonstrated rise times and time resolution of a few nanoseconds, as well as sub-millimeter spatial resolution compatible with the pixel pitch. △ Less

Submitted 14 June, 2014; v1 submitted 13 March, 2014; originally announced March 2014.

Comments: Submitted to NIM

Journal ref: Nuclear Inst. and Methods in Physics Research, A (2014), pp. 122-132

Planning the Future of U.S. Particle Physics (Snowmass 2013): Chapter 8: Instrumentation Frontier

Authors: M. Demarteau, R. Lipton, H. Nicholson, I. Shipsey, D. Akerib, A. Albayrak-Yetkin, J. Alexander, J. Anderson, M. Artuso, D. Asner, R. Ball, M. Battaglia, C. Bebek, J. Beene, Y. Benhammou, E. Bentefour, M. Bergevin, A. Bernstein, B. Bilki, E. Blucher, G. Bolla, D. Bortoletto, N. Bowden, G. Brooijmans, K. Byrum , et al. (189 additional authors not shown)

Abstract: These reports present the results of the 2013 Community Summer Study of the APS Division of Particles and Fields ("Snowmass 2013") on the future program of particle physics in the U.S. Chapter 8, on the Instrumentation Frontier, discusses the instrumentation needs of future experiments in the Energy, Intensity, and Cosmic Frontiers, promising new technologies for particle physics research, and iss… ▽ More These reports present the results of the 2013 Community Summer Study of the APS Division of Particles and Fields ("Snowmass 2013") on the future program of particle physics in the U.S. Chapter 8, on the Instrumentation Frontier, discusses the instrumentation needs of future experiments in the Energy, Intensity, and Cosmic Frontiers, promising new technologies for particle physics research, and issues of gathering resources for long-term research in this area. △ Less

Submitted 23 January, 2014; originally announced January 2014.

Comments: 50 pages

Plasma panel-based radiation detectors

Authors: Peter Friedman, Robert Ball, James Beene, Yan Benhammou, Meny Ben-Moshe, Hassan Bentefour, J. W. Chapman, Erez Etzion, Claudio Ferretti, Daniel Levin, Yiftah Silver, Robert Varner, Curtis Weaverdyck, Bing Zhou

Abstract: The plasma panel sensor (PPS) is a gaseous micropattern radiation detector under current development. It has many operational and fabrication principles common to plasma display panels. It comprises a dense matrix of small, gas plasma discharge cells within a hermetically sealed panel. As in plasma display panels, it uses nonreactive, intrinsically radiation-hard materials such as glass substrates… ▽ More The plasma panel sensor (PPS) is a gaseous micropattern radiation detector under current development. It has many operational and fabrication principles common to plasma display panels. It comprises a dense matrix of small, gas plasma discharge cells within a hermetically sealed panel. As in plasma display panels, it uses nonreactive, intrinsically radiation-hard materials such as glass substrates, refractory metal electrodes, and mostly inert gas mixtures. We are developing these devices primarily as thin, low-mass detectors with gas gaps from a few hundred microns to a few millimeters. The PPS is a high gain, inherently digital device with the potential for fast response times, fine position resolution (<50-mm RMS) and low cost. In this paper, we report on prototype PPS experimental results in detecting betas, protons, and cosmic muons, and we extrapolate on the PPS potential for applications including the detection of alphas, heavy ions at low-to-medium energy, thermal neutrons, and X-rays. △ Less

Submitted 10 May, 2013; originally announced May 2013.

Journal ref: J. Soc. Info. Display 21, No. 1, 46-54 (2013)

Plasma Panel Sensors for Particle and Beam Detection

Authors: Peter S. Friedman, Robert Ball, James R. Beene, Yan Benhammou, E. H. Bentefour, J. W. Chapman, Erez Etzion, Claudio Ferretti, Nir Guttman, Daniel S. Levin, Meny Ben-Moshe, Yiftah Silver, Robert L. Varner, Curtis Weaverdyck, Bing Zhou

Abstract: The plasma panel sensor (PPS) is an inherently digital, high gain, novel variant of micropattern gas detectors inspired by many operational and fabrication principles common to plasma display panels (PDPs). The PPS is comprised of a dense array of small, plasma discharge, gas cells within a hermetically-sealed glass panel, and is assembled from non-reactive, intrinsically radiation-hard materials… ▽ More The plasma panel sensor (PPS) is an inherently digital, high gain, novel variant of micropattern gas detectors inspired by many operational and fabrication principles common to plasma display panels (PDPs). The PPS is comprised of a dense array of small, plasma discharge, gas cells within a hermetically-sealed glass panel, and is assembled from non-reactive, intrinsically radiation-hard materials such as glass substrates, metal electrodes and mostly inert gas mixtures. We are developing the technology to fabricate these devices with very low mass and small thickness, using gas gaps of at least a few hundred micrometers. Our tests with these devices demonstrate a spatial resolution of about 1 mm. We intend to make PPS devices with much smaller cells and the potential for much finer position resolutions. Our PPS tests also show response times of several nanoseconds. We report here our results in detecting betas, cosmic-ray muons, and our first proton beam tests. △ Less

Submitted 22 November, 2012; originally announced November 2012.

Comments: 2012 IEEE NSS

Development of a plasma panel radiation detector: recent progress and key issues

Authors: Yiftah Silver, Robert Ball, James R. Beene, Yan Benhammou, Meny Ben-Moshe, J. W. Chapman, Tiesheng Dai, Erez Etzion, Claudio Ferretti, Nir Guttman, Peter S. Friedman, Daniel S. Levin, S. Ritt, Robert L. Varner, Curtis Weaverdyck, Bing Zhou

Abstract: A radiation detector based on plasma display panel technology, which is the principal component of plasma television displays is presented. Plasma Panel Sensor (PPS) technology is a variant of micropattern gas radiation detectors. The PPS is conceived as an array of sealed plasma discharge gas cells which can be used for fast response (O(5ns) per pixel), high spatial resolution detection (pixel pi… ▽ More A radiation detector based on plasma display panel technology, which is the principal component of plasma television displays is presented. Plasma Panel Sensor (PPS) technology is a variant of micropattern gas radiation detectors. The PPS is conceived as an array of sealed plasma discharge gas cells which can be used for fast response (O(5ns) per pixel), high spatial resolution detection (pixel pitch can be less than 100 micrometer) of ionizing and minimum ionizing particles. The PPS is assembled from non-reactive, intrinsically radiation-hard materials: glass substrates, metal electrodes and inert gas mixtures. We report on the PPS development program, including simulations and design and the first laboratory studies which demonstrate the usage of plasma display panels in measurements of cosmic ray muons, as well as the expansion of experimental results on the detection of betas from radioactive sources. △ Less

Submitted 30 May, 2012; originally announced May 2012.

Comments: presented at IEEE NSS 2011 (Barcelona)

The Detection of Ionizing Radiation by Plasma Panel Sensors: Cosmic Muons, Ion Beams and Cancer Therapy

Authors: Peter S. Friedman, Robert Ball, J. W. Chapman, Claudio Ferretti, Daniel S. Levin, Curtis Weaverdyck, Bing Zhou, Yan Benhammou, Erez Etzion, Nir Guttman, M. Ben Moshe, Yiftah Silver, James R. Beene, Robert L. Varner Jr.

Abstract: The plasma panel sensor is an ionizing photon and particle radiation detector derived from PDP technology with high gain and nanosecond response. Experimental results in detecting cosmic ray muons and beta particles from radioactive sources are described along with applications including high energy and nuclear physics, homeland security and cancer therapeutics The plasma panel sensor is an ionizing photon and particle radiation detector derived from PDP technology with high gain and nanosecond response. Experimental results in detecting cosmic ray muons and beta particles from radioactive sources are described along with applications including high energy and nuclear physics, homeland security and cancer therapeutics △ Less

Submitted 3 April, 2012; originally announced April 2012.

Comments: Presented at SID Symposium, June 2012

Progress in the Development of Plasma Panel Radiation Detectors

Authors: Robert Ball, James R. Beene, Yan Benhammou, Meny Ben Moshe, J. Wehrley Chapman, Tiesheng Dai, Erez Etzion, Peter S. Friedman, Daniel S. Levin, Yiftah Silver, Guy Sherman, Robert L. Varner Jr., Curtis Weaverdyck, Steve White, J. Yu, Bing Zhou

Abstract: Plasma Display Panels (PDP), the underlying engine of panel plasma television displays, are being investigated for their utility as radiation detectors called Plasma Panel Sensors (PPS). The PPS a novel variant of a micropattern radiation detector, is intended to be a fast, high resolution detector comprised of an array of plasma discharge cells operating in a hermetically sealed gas mixture. We r… ▽ More Plasma Display Panels (PDP), the underlying engine of panel plasma television displays, are being investigated for their utility as radiation detectors called Plasma Panel Sensors (PPS). The PPS a novel variant of a micropattern radiation detector, is intended to be a fast, high resolution detector comprised of an array of plasma discharge cells operating in a hermetically sealed gas mixture. We report on the PPS development effort, including recent laboratory measurements. △ Less

Submitted 30 December, 2010; originally announced January 2011.

Comments: 2010 IEEE Nucl. Sci. Symp. & Medical Imaging Conf. (Knoxville, TN), Paper N50-7 (November 3, 2010)

Large-Area Plasma-Panel Radiation Detectors for Nuclear Medicine Imaging to Homeland Security and the Super Large Hadron Collider

Authors: Peter S. Friedman, Robert Ball, J. Wehrley Chapman, Daniel S. Levin, Curtis Weaverdyck, Bing Zhou, Yan Benhammou, Erez Etzion, M. Ben Moshe, Yiftah Silver, James R. Beene, Robert L. Varner Jr.

Abstract: A new radiation sensor derived from plasma panel display technology is introduced. It has the capability to detect ionizing and non-ionizing radiation over a wide energy range and the potential for use in many applications. The principle of operation is described and some early results presented. A new radiation sensor derived from plasma panel display technology is introduced. It has the capability to detect ionizing and non-ionizing radiation over a wide energy range and the potential for use in many applications. The principle of operation is described and some early results presented. △ Less

Submitted 3 July, 2010; originally announced July 2010.

Comments: International Display Symposium, Seattle, WA, May 2010