Showing 1–3 of 3 results for author: Sikler, G

An einzel lens with a diagonal-slit central electrode to combine steering and focusing of a low energy ion beam

Authors: P. Mandal, G. Sikler, M. Mukherjee

Abstract: In many applications of the simple three-element einzel lens, such as injecting a low energy ion beam into a high-field Penning trap, there is a need for small-angle steering as well as focusing of the beam. We have analyzed a diagonalslit cylinder serving as the middle electrode of such a lens and have shown that such an electrode configuration significantly diminishes the aberration associated w… ▽ More In many applications of the simple three-element einzel lens, such as injecting a low energy ion beam into a high-field Penning trap, there is a need for small-angle steering as well as focusing of the beam. We have analyzed a diagonalslit cylinder serving as the middle electrode of such a lens and have shown that such an electrode configuration significantly diminishes the aberration associated with such a deflection. △ Less

Submitted 3 August, 2010; v1 submitted 9 July, 2010; originally announced July 2010.

Comments: 5 pages, 8 figures

Journal ref: JINST 1106:02004,2011

Status of COLDDIAG: A Cold Vacuum Chamber for Diagnostics

Authors: S. Gerstl, T. Baumbach, S. Casalbuoni, A. W. Grau, M. Hagelstein, D. Saez de Jauregui, C. Boffo, G. Sikler, V. Baglin, M. P. Cox, J. C. Schouten, R. Cimino, M. Commisso, B. Spataro, A. Mostacci, E. J. Wallén, R. Weigel, J. Clarke, D. Scott, T. W. Bradshaw, R. M. Jones, I. R. R. Shinton

Abstract: One of the still open issues for the development of superconducting insertion devices is the understanding of the beam heat load. With the aim of measuring the beam heat load to a cold bore and the hope to gain a deeper understanding in the beam heat load mechanisms, a cold vacuum chamber for diagnostics is under construction. The following diagnostics will be implemented: i) retarding field analy… ▽ More One of the still open issues for the development of superconducting insertion devices is the understanding of the beam heat load. With the aim of measuring the beam heat load to a cold bore and the hope to gain a deeper understanding in the beam heat load mechanisms, a cold vacuum chamber for diagnostics is under construction. The following diagnostics will be implemented: i) retarding field analyzers to measure the electron energy and flux, ii) temperature sensors to measure the total heat load, iii) pressure gauges, iv) and mass spectrometers to measure the gas content. The inner vacuum chamber will be removable in order to test different geometries and materials. This will allow the installation of the cryostat in different synchrotron light sources. COLDDIAG will be built to fit in a short straight section at ANKA. A first installation at the synchrotron light source Diamond is foreseen in June 2011. Here we describe the technical design report of this device and the planned measurements with beam. △ Less

Submitted 1 June, 2010; originally announced June 2010.

Comments: Presented at First International Particle Accelerator Conference, IPAC'10, Kyoto, Japan, from 23 to 28 May 2010

Journal ref: Conf.Proc.C100523:wepd015,2010

A linear radiofrequency ion trap for accumulation, bunching, and emittance improvement of radioactive ion beams

Authors: F. Herfurth, J. Dilling, A. Kellerbauer, G. Bollen, S. Henry, H. -J. Kluge, E. Lamour, D. Lunney, R. B. Moore, C. Scheidenberger, S. Schwarz, G. Sikler, J. Szerypo

Abstract: An ion beam cooler and buncher has been developed for the manipulation of radioactive ion beams. The gas-filled linear radiofrequency ion trap system is installed at the Penning trap mass spectrometer ISOLTRAP at ISOLDE/CERN. Its purpose is to accumulate the 60-keV continuous ISOLDE ion beam with high efficiency and to convert it into low-energy low-emittance ion pulses. The efficiency was found… ▽ More An ion beam cooler and buncher has been developed for the manipulation of radioactive ion beams. The gas-filled linear radiofrequency ion trap system is installed at the Penning trap mass spectrometer ISOLTRAP at ISOLDE/CERN. Its purpose is to accumulate the 60-keV continuous ISOLDE ion beam with high efficiency and to convert it into low-energy low-emittance ion pulses. The efficiency was found to exceed 10% in agreement with simulations. A more than 10-fold reduction of the ISOLDE beam emittance can be achieved. The system has been used successfully for first on-line experiments. Its principle, setup and performance will be discussed. △ Less

Submitted 30 November, 2000; originally announced November 2000.

Journal ref: Nucl.Instrum.Meth.A469:254-275,2001