Showing 1–2 of 2 results for author: Sidles, J A
-
Digital control of force microscope cantilevers using a field programmable gate array
Authors:
Jonathan P. Jacky,
Joseph L. Garbini,
Matthew Ettus,
John A. Sidles
Abstract:
This report describes a cantilever controller for magnetic resonance force microscopy (MRFM) based on a field programmable gate array (FPGA), along with the hardware and software used to integrate the controller into an experiment. The controller is assembled from a low-cost commercially available software defined radio (SDR) device and libraries of open-source software. The controller includes…
▽ More
This report describes a cantilever controller for magnetic resonance force microscopy (MRFM) based on a field programmable gate array (FPGA), along with the hardware and software used to integrate the controller into an experiment. The controller is assembled from a low-cost commercially available software defined radio (SDR) device and libraries of open-source software. The controller includes a digital filter comprising two cascaded second-order sections ("biquads"), which together can implement transfer functions for optimal cantilever controllers. An appendix in this report shows how to calculate filter coefficients for an optimal controller from measured cantilever characteristics. The controller also includes an input multiplexer and adder used in calibration protocols. Filter coefficients and multiplexer settings can be set and adjusted by control software while an experiment is running. The input is sampled at 64 MHz; the sampling frequency in the filters can be divided down under software control to achieve a good match with filter characterisics. Data reported here were sampled at 500 kHz, chosen for acoustic cantilevers with resonant frequencies near 8 kHz. Inputs are digitized with 12 bits resolution, outputs with 14 bits. The experiment software is organized as a client and server to make it easy to adapt the controller to different experiments. The server encapusulates the details of controller hardware organization, connection technology, filter architecture, and number representation. The same server could be used in any experiment, while a different client encodes the particulars of each experiment.
△ Less
Submitted 8 September, 2008;
originally announced September 2008.
-
Zero-Temperature Casimir Fluctuations and the Limits of Force Microscope Sensitivity
Authors:
John A. Sidles
Abstract:
It is predicted that in force microscopy the quantum fluctuations responsible for the Casimir force can be directly observed as temperature-independent force fluctuations having spectral density $9π/(40\ln(4/e)) \hbar δk$, where $\hbar$ is Planck's constant and $δk$ is the observed change in spring constant as the microscope tip approaches a sample. For typical operating parameters the predicted…
▽ More
It is predicted that in force microscopy the quantum fluctuations responsible for the Casimir force can be directly observed as temperature-independent force fluctuations having spectral density $9π/(40\ln(4/e)) \hbar δk$, where $\hbar$ is Planck's constant and $δk$ is the observed change in spring constant as the microscope tip approaches a sample. For typical operating parameters the predicted force noise is of order $10^{-18}$ Newton in one Hertz of bandwidth. The Second Law is respected via the fluctuation-dissipation theorem. For small tip-sample separations the cantilever damping is predicted to increase as temperature is reduced, a behavior that is reminiscent of the Kondo effect.
△ Less
Submitted 18 October, 1997; v1 submitted 3 October, 1997;
originally announced October 1997.
