-
Study of the energy spectrum of alpha particles in an experiment on irradiation of a boron target with a proton beam at the Prometheus accelerator
Authors:
A. S. Rusetskii,
M. A. Negodaev,
A. V. Oginov,
V. A. Ryabov K. V. Shpakov,
A. E. Shemyakov,
I. N. Zavestovskaya
Abstract:
The energy spectrum of alpha particles from the nuclear reaction p + $^{11}$B $\rightarrow 3α$ was studied using the beam of the injector of the proton synchrotron of the Prometheus proton therapy complex. The reaction products (alpha particles) were recorded using a CR-39 track detector. The detectors were calibrated using a $^{241}$Am radioactive source. It was determined that mainly alpha parti…
▽ More
The energy spectrum of alpha particles from the nuclear reaction p + $^{11}$B $\rightarrow 3α$ was studied using the beam of the injector of the proton synchrotron of the Prometheus proton therapy complex. The reaction products (alpha particles) were recorded using a CR-39 track detector. The detectors were calibrated using a $^{241}$Am radioactive source. It was determined that mainly alpha particles emitted from the boron target have energies from 3 to 5.5 MeV. In this case, a significant part of the alpha particles emitted from the depths of the target have significantly lower energies compared to the calculated ones due to ionization losses. Measuring the energy spectrum of alpha particles from targets containing boron is of great scientific and practical interest for identifying the mechanisms of boron-proton capture therapy and determining the additional contribution to the therapeutic effect of proton irradiation.
△ Less
Submitted 13 December, 2024;
originally announced December 2024.
-
Design, optimization and experimental characterization of RF injectors for high brightness electron beams and plasma acceleration
Authors:
V. Shpakov,
D. Alesini,
M. P. Anania,
M. Behtouei,
B. Buonomo,
M. Bellaveglia,
A. Biagioni,
F. Cardelli,
M. Carillo,
E. Chiadroni,
A. Cianchi,
G. Costa,
M. Del Giorno,
L. Faillace,
M. Ferrario,
M. del Franco,
G. Franzini,
M. Galletti,
L. Giannessi,
A. Giribono,
A. Liedl,
V. Lollo,
A. Mostacci,
G. Di Pirro,
L. Piersanti
, et al. (8 additional authors not shown)
Abstract:
In this article, we share our experience related to the new photo-injector commissioning at the SPARC\_LAB test facility. The new photo-injector was installed into an existing machine and our goal was not only to improve the final beam parameters themselves but to improve the machine handling in day-to-day operations as well. Thus, besides the pure beam characterization, this article contains info…
▽ More
In this article, we share our experience related to the new photo-injector commissioning at the SPARC\_LAB test facility. The new photo-injector was installed into an existing machine and our goal was not only to improve the final beam parameters themselves but to improve the machine handling in day-to-day operations as well. Thus, besides the pure beam characterization, this article contains information about the improvements, that were introduced into the new photo-injector design from the machine maintenance point of view, and the benefits, that we gained by using the new technique to assemble the gun itself.
△ Less
Submitted 12 December, 2022;
originally announced December 2022.
-
Free electron laser seeded by betatron radiation
Authors:
A. Ghigo,
M. Galletti,
V. Shpakov,
A. Curcio,
V. Petrillo
Abstract:
In this paper the use of betatron radiation as a seed for the Free Electron Laser (FEL) is presented. The scheme shown can be adopted from all FEL driven by plasma accelerated electron beams via Particle or Laser Wake Field Acceleration. Intense radiation in the region of X ray characterized by a broad spectrum, the betatron radiation, is indeed produced in the plasma acceleration process from the…
▽ More
In this paper the use of betatron radiation as a seed for the Free Electron Laser (FEL) is presented. The scheme shown can be adopted from all FEL driven by plasma accelerated electron beams via Particle or Laser Wake Field Acceleration. Intense radiation in the region of X ray characterized by a broad spectrum, the betatron radiation, is indeed produced in the plasma acceleration process from the electron passing through the ionized gas. It is proposed to use this radiation, suitably selected in wavelength and properly synchronized, to stimulate the emission of the Free Electron Laser.
△ Less
Submitted 21 September, 2022;
originally announced September 2022.
-
First emittance measurement of the beam-driven plasma wakefield accelerated electron beam
Authors:
V. Shpakov,
M. P. Anania,
M. Behtouei,
M. Bellaveglia,
A. Biagioni,
M. Cesarini,
E. Chiadroni,
A. Cianchi,
G. Costa,
M. Croia,
A. Del Dotto,
M. Diomede,
F. Dipace,
M. Ferrario,
M. Galletti,
A. Giribono,
A. Liedl,
V. Lollo,
L. Magnisi,
A. Mostacci,
G. Di Pirro,
L. Piersanti,
R. Pompili,
S. Romeo,
A. R. Rossi
, et al. (4 additional authors not shown)
Abstract:
Next-generation plasma-based accelerators can push electron beams to GeV energies within centimetre distances. The plasma, excited by a driver pulse, is indeed able to sustain huge electric fields that can efficiently accelerate a trailing witness bunch, which was experimentally demonstrated on multiple occasions. Thus, the main focus of the current research is being shifted towards achieving a hi…
▽ More
Next-generation plasma-based accelerators can push electron beams to GeV energies within centimetre distances. The plasma, excited by a driver pulse, is indeed able to sustain huge electric fields that can efficiently accelerate a trailing witness bunch, which was experimentally demonstrated on multiple occasions. Thus, the main focus of the current research is being shifted towards achieving a high quality of the beam after the plasma acceleration. In this letter we present beam-driven plasma wakefield acceleration experiment, where initially preformed high-quality witness beam was accelerated inside the plasma and characterized. In this experiment the witness beam quality after the acceleration was maintained on high level, with $0.2\%$ final energy spread and $3.8~μm$ resulting normalized transverse emittance after the acceleration. In this article, for the first time to our knowledge, the emittance of the PWFA beam was directly measured.
△ Less
Submitted 9 April, 2021;
originally announced April 2021.
-
Energy spread minimization in a beam-driven plasma wakefield accelerator
Authors:
R. Pompili,
M. P. Anania,
M. Behtouei,
M. Bellaveglia,
A. Biagioni,
F. G. Bisesto,
M. Cesarini,
E. Chiadroni,
A. Cianchi,
G. Costa,
M. Croia,
A. Del Dotto,
D. Di Giovenale,
M. Diomede,
F. Dipace,
M. Ferrario,
A. Giribono,
V. Lollo,
L. Magnisi,
M. Marongiu,
A. Mostacci,
G. Di Pirro,
S. Romeo,
A. R. Rossi,
J. Scifo
, et al. (4 additional authors not shown)
Abstract:
Next-generation plasma-based accelerators can push electron bunches to gigaelectronvolt energies within centimetre distances. The plasma, excited by a driver pulse, generates large electric fields that can efficiently accelerate a trailing witness bunch making possible the realization of laboratory-scale applications ranging from high-energy colliders to ultra-bright light sources. So far several…
▽ More
Next-generation plasma-based accelerators can push electron bunches to gigaelectronvolt energies within centimetre distances. The plasma, excited by a driver pulse, generates large electric fields that can efficiently accelerate a trailing witness bunch making possible the realization of laboratory-scale applications ranging from high-energy colliders to ultra-bright light sources. So far several experiments have demonstrated a significant acceleration but the resulting beam quality, especially the energy spread, is still far from state of the art conventional accelerators. Here we show the results of a beam-driven plasma acceleration experiment where we used an electron bunch as a driver followed by an ultra-short witness. The experiment demonstrates, for the first time, an innovative method to achieve an ultra-low energy spread of the accelerated witness of about 0.1%. This is an order of magnitude smaller than what has been obtained so far. The result can lead to a major breakthrough toward the optimization of the plasma acceleration process and its implementation in forthcoming compact machines for user-oriented applications.
△ Less
Submitted 2 June, 2020;
originally announced June 2020.
-
Longitudinal phase-space manipulation with beam-driven plasma wakefields
Authors:
V. Shpakov,
M. P. Anania,
M. Bellaveglia,
A. Biagioni,
F. Bisesto,
F. Cardelli,
M. Cesarini,
E. Chiadroni,
A. Cianchi,
G. Costa,
M. Croia,
A. DelDotto,
D. DiGiovenale,
M. Diomede,
M. Ferrario,
F. Filippi,
A. Giribono,
V. Lollo,
M. Marongiu,
V. Martinelli,
A. Mostacci,
L. Piersanti,
G. DiPirro,
R. Pompili,
S. Romeo
, et al. (4 additional authors not shown)
Abstract:
The development of compact accelerator facilities providing high-brightness beams is one of the most challenging tasks in field of next-generation compact and cost affordable particle accelerators, to be used in many fields for industrial, medical and research applications. The ability to shape the beam longitudinal phase-space, in particular, plays a key role to achieve high-peak brightness. Here…
▽ More
The development of compact accelerator facilities providing high-brightness beams is one of the most challenging tasks in field of next-generation compact and cost affordable particle accelerators, to be used in many fields for industrial, medical and research applications. The ability to shape the beam longitudinal phase-space, in particular, plays a key role to achieve high-peak brightness. Here we present a new approach that allows to tune the longitudinal phase-space of a high-brightness beam by means of a plasma wakefields. The electron beam passing through the plasma drives large wakefields that are used to manipulate the time-energy correlation of particles along the beam itself. We experimentally demonstrate that such solution is highly tunable by simply adjusting the density of the plasma and can be used to imprint or remove any correlation onto the beam. This is a fundamental requirement when dealing with largely time-energy correlated beams coming from future plasma accelerators.
△ Less
Submitted 21 February, 2019;
originally announced February 2019.
-
Hard bremsstrahlung from a high-voltage atmospheric discharge and its anisotropy
Authors:
A. V. Agafonov,
A. V. Oginov,
A. A. Rodionov,
V. A. Ryabov,
V. A. Chechin,
K. V. Shpakov
Abstract:
The results of the experiments on recording hard gamma radiation and measurements of its angular distribution at the initial stage of a laboratory high-voltage atmospheric discharge are presented. The experiments were performed on an ERG installation at a voltage of $\sim 1$ MV, an atmospheric discharge current of up to 12 kA, and a gap of 0.55 m. The duration of the voltage pulse was about 1~$μ$s…
▽ More
The results of the experiments on recording hard gamma radiation and measurements of its angular distribution at the initial stage of a laboratory high-voltage atmospheric discharge are presented. The experiments were performed on an ERG installation at a voltage of $\sim 1$ MV, an atmospheric discharge current of up to 12 kA, and a gap of 0.55 m. The duration of the voltage pulse was about 1~$μ$s with a pulse rise time of 150-200 ns. The radiation was recorded by an assembly of 10 identical scintillation detectors installed each 10$^\circ$ around the circumference of a quarter of a circle with a curvature of 1 m. In order to separate the radiation with energies from 20 keV to 1.5 MeV, Al and Pb filters of different thicknesses were used. The obtained results show that, as a rule, a multi-beam radiation pattern and several bursts of radiation (each with a directional pattern) are recorded in each shot. In a considerable number of "shots", hard radiation with photon energies comparable to or exceeding the maximum electron energy corresponding to the applied voltage is recorded. In these cases, a needle-like radiation pattern is observed, including at large angles to the axis of the discharge. This may indicate the acceleration of electrons in different plasma channels.
△ Less
Submitted 19 July, 2018;
originally announced July 2018.
-
Conceptual design of electron beam diagnostics for high brightness plasma accelerator
Authors:
A. Cianchi,
D. Alesini,
M. P. Anania,
F. Biagioni,
F. Bisesto,
E. Chiadroni,
A. Curcio,
M. Ferrario,
F. Filippi,
A. Ghigo,
A. Giribono,
V. Lollo,
A. Mostacci,
R. Pompili,
L. Sabbatini,
V. Shpakov,
A. Stella,
C. Vaccarezza,
A. Vannozzi,
F. Villa
Abstract:
A design study of the diagnostics of a high brightness linac, based on X-band structures, and a plasma accelerator stage, has been delivered in the framework of the EuPRAXIA@SPARC_LAB project. In this paper, we present a conceptual design of the proposed diagnostics, using state of the art systems and new and under development devices. Single shot measurements are preferable for plasma accelerated…
▽ More
A design study of the diagnostics of a high brightness linac, based on X-band structures, and a plasma accelerator stage, has been delivered in the framework of the EuPRAXIA@SPARC_LAB project. In this paper, we present a conceptual design of the proposed diagnostics, using state of the art systems and new and under development devices. Single shot measurements are preferable for plasma accelerated beams, including emittance, while $μ$m level and fs scale beam size and bunch length respectively are requested. The needed to separate the driver pulse (both laser or beam) from the witness accelerated bunch imposes additional constrains for the diagnostics. We plan to use betatron radiation for the emittance measurement just at the end of the plasma booster, while other single-shot methods must be proven before to be implemented. Longitudinal measurements, being in any case not trivial for the fs level bunch length, seem to have already a wider range of possibilities.
△ Less
Submitted 14 February, 2018;
originally announced February 2018.
-
Energy Measurements by Means of Transition Radiation in novel Linacs
Authors:
M. Marongiu,
M. Castellano,
E. Chiadroni,
A. Cianchi,
G. Franzini,
A. Giribono,
A. Mostacci,
L. Palumbo,
V. Shpakov,
A. Stella,
A. Variola
Abstract:
Advanced linear accelerator design may use Optical Transition Radiation (OTR) screens to measure beam spot size; for instance, such screens are foreseen in plasma based accelerators (EuPRAXIA@SPARC_LAB) or Compton machines (Gamma Beam Source@ELI-NP). Optical Transition Radiation angular distribution strongly depends on beam energy. Since OTR screens are typically placed in several positions along…
▽ More
Advanced linear accelerator design may use Optical Transition Radiation (OTR) screens to measure beam spot size; for instance, such screens are foreseen in plasma based accelerators (EuPRAXIA@SPARC_LAB) or Compton machines (Gamma Beam Source@ELI-NP). Optical Transition Radiation angular distribution strongly depends on beam energy. Since OTR screens are typically placed in several positions along the Linac to monitor the beam envelope, one may perform a distributed energy measurement along the machine. Furthermore, a single shot energy measurement can be useful in plasma accelerators to measure shot to shot energy variations after the plasma interaction. Preliminary measurements of OTR angular distribution of about 100 MeV electrons have been performed at the SPARC_LAB facility. In this paper, we discuss the sensitivity of this measurement to beam divergence and others parameters, as well as the resolution required and the needed upgrades of conventional OTR diagnostics, using as an example the data collected at SPARC_LAB.
△ Less
Submitted 12 February, 2018;
originally announced February 2018.
-
Recent studies on single-shot diagnostics for plasma accelerators at SPARC_LAB
Authors:
F. G. Bisesto,
M. P. Anania,
M. Botton,
M. Castellano,
E. Chiadroni,
A. Cianchi,
A. Curcio,
M. Ferrario,
M. Galletti,
Z. Henis,
R. Pompili,
E. Schleifer,
V. Shpakov,
A. Zigler
Abstract:
Plasma wakefield acceleration is the most promising acceleration technique for compact and cheap accelerators, thanks to the high accelerating gradients achievable. Nevertheless, this approach still suffers of shot-to-shot instabilities, mostly related to experimental parameters fluctuations. Therefore, the use of single shot diagnostics is needed to properly understand the acceleration mechanism.…
▽ More
Plasma wakefield acceleration is the most promising acceleration technique for compact and cheap accelerators, thanks to the high accelerating gradients achievable. Nevertheless, this approach still suffers of shot-to-shot instabilities, mostly related to experimental parameters fluctuations. Therefore, the use of single shot diagnostics is needed to properly understand the acceleration mechanism. In this work, we present two diagnostics to probe electron beams from laser-plasma interactions, one relying on Electro Optical Sampling (EOS) for laser-solid matter interactions, the other one based on Optical Transition Radiation (OTR) for single shot measurements of the transverse emittance of plasma accelerated electron beams, both developed at the SPARC_LAB Test Facility.
△ Less
Submitted 9 February, 2018;
originally announced February 2018.
-
Plasma acceleration limitations due to betatron radiation
Authors:
V. Shpakov,
E. Chiadroni,
A. Curcio,
H. Fares,
M. Ferrario,
A. Marocchino,
F. Mira,
V. Petrillo,
A. R. Rossi,
S. Romeo
Abstract:
High energy spread caused by the longitudinal size of the beam is well known in wake-field acceleration. Usually this issue can be solved with beam loading effect that allows to keep accelerating field nearly constant, along the whole duration of the beam. In this work, however, we would like to address another source of energy spread that arises at high energy, due to betatron radiation.
High energy spread caused by the longitudinal size of the beam is well known in wake-field acceleration. Usually this issue can be solved with beam loading effect that allows to keep accelerating field nearly constant, along the whole duration of the beam. In this work, however, we would like to address another source of energy spread that arises at high energy, due to betatron radiation.
△ Less
Submitted 9 February, 2018;
originally announced February 2018.
-
Overview of Plasma Lens Experiments and Recent Results at SPARC_LAB
Authors:
E. Chiadroni,
M. P. Anania,
M. Bellaveglia,
A. Biagioni,
F. Bisesto,
E. Brentegani,
F. Cardelli,
A. Cianchi,
G. Costa,
D. Di Giovenale,
G. Di Pirro,
M. Ferrario,
F. Filippi,
A. Gallo,
A. Giribono,
A. Marocchino,
A. Mostacci,
L. Piersanti,
R. Pompili,
J. B. Rosenzweig,
A. R. Rossi,
J. Scifo,
V. Shpakov,
C. Vaccarezza,
F. Villa
, et al. (1 additional authors not shown)
Abstract:
Beam injection and extraction from a plasma module is still one of the crucial aspects to solve in order to produce high quality electron beams with a plasma accelerator. Proper matching conditions require to focus the incoming high brightness beam down to few microns size and to capture a high divergent beam at the exit without loss of beam quality. Plasma-based lenses have proven to provide focu…
▽ More
Beam injection and extraction from a plasma module is still one of the crucial aspects to solve in order to produce high quality electron beams with a plasma accelerator. Proper matching conditions require to focus the incoming high brightness beam down to few microns size and to capture a high divergent beam at the exit without loss of beam quality. Plasma-based lenses have proven to provide focusing gradients of the order of kT/m with radially symmetric focusing thus promising compact and affordable alternative to permanent magnets in the design of transport lines. In this paper an overview of recent experiments and future perspectives of plasma lenses is reported.
△ Less
Submitted 1 February, 2018;
originally announced February 2018.
-
EuPRAXIA@SPARC_LAB Design study towards a compact FEL facility at LNF
Authors:
M. Ferrario,
D. Alesini,
M. P. Anania,
M. Artioli,
A. Bacci,
S. Bartocci,
R. Bedogni,
M. Bellaveglia,
A. Biagioni,
F. Bisesto,
F. Brandi,
E. Brentegani,
F. Broggi,
B. Buonomo,
P. L. Campana,
G. Campogiani,
C. Cannaos,
S. Cantarella,
F. Cardelli,
M. Carpanese,
M. Castellano,
G. Castorina,
N. Catalan Lasheras,
E. Chiadroni,
A. Cianchi
, et al. (95 additional authors not shown)
Abstract:
On the wake of the results obtained so far at the SPARC\_LAB test-facility at the Laboratori Nazionali di Frascati (Italy), we are currently investigating the possibility to design and build a new multi-disciplinary user-facility, equipped with a soft X-ray Free Electron Laser (FEL) driven by a $\sim$1 GeV high brightness linac based on plasma accelerator modules. This design study is performed in…
▽ More
On the wake of the results obtained so far at the SPARC\_LAB test-facility at the Laboratori Nazionali di Frascati (Italy), we are currently investigating the possibility to design and build a new multi-disciplinary user-facility, equipped with a soft X-ray Free Electron Laser (FEL) driven by a $\sim$1 GeV high brightness linac based on plasma accelerator modules. This design study is performed in synergy with the EuPRAXIA design study. In this paper we report about the recent progresses in the on going design study of the new facility.
△ Less
Submitted 26 January, 2018;
originally announced January 2018.
-
Recent results at SPARC_LAB
Authors:
R. Pompili,
M. P. Anania,
M. Bellaveglia,
A. Biagioni,
S. Bini,
F. Bisesto,
E. Chiadroni,
A. Cianchi,
G. Costa,
D. Di Giovenale,
M. Ferrario,
F. Filippi,
A. Gallo,
A. Giribono,
V. Lollo,
A. Marocchino,
V. Martinelli,
A. Mostacci,
G. Di Pirro,
S. Romeo,
J. Scifo,
V. Shpakov,
C. Vaccarezza,
F. Villa,
A. Zigler
Abstract:
The current activity of the SPARC_LAB test-facility is focused on the realization of plasma-based acceleration experiments with the aim to provide accelerating field of the order of several GV/m while maintaining the overall quality (in terms of energy spread and emittance) of the accelerated electron bunch. In the following, the current status of such an activity is presented. We also show result…
▽ More
The current activity of the SPARC_LAB test-facility is focused on the realization of plasma-based acceleration experiments with the aim to provide accelerating field of the order of several GV/m while maintaining the overall quality (in terms of energy spread and emittance) of the accelerated electron bunch. In the following, the current status of such an activity is presented. We also show results related to the usability of plasmas as focusing lenses in view of a complete plasma-based focusing and accelerating system.
△ Less
Submitted 18 January, 2018;
originally announced January 2018.
-
Nano-machining, surface analysis and emittance measurements of a copper photocathode at SPARC_LAB
Authors:
J. Scifo,
D. Alesini,
M. P. Anania,
M. Bellaveglia,
S. Bellucci,
A. Biagioni,
F. Bisesto,
F. Cardelli,
E. Chiadroni,
A. Cianchi,
G. Costa,
D. Di Giovenale,
G. Di Pirro,
R. Di Raddo,
D. H. Dowell,
M. Ferrario,
A. Giribono,
A. Lorusso,
F. Micciulla,
A. Mostacci,
D. Passeri,
A. Perrone,
L. Piersanti,
R. Pompili,
V. Shpakov
, et al. (3 additional authors not shown)
Abstract:
R\&D activity on Cu photocathodes is under development at the SPARC\_LAB test facility to fully characterize each stage of the photocathode "life" and to have a complete overview of the photoemission properties in high brightness photo-injectors. The nano(n)-machining process presented here consists in diamond milling, and blowing with dry nitrogen. This procedure reduces the roughness of the cath…
▽ More
R\&D activity on Cu photocathodes is under development at the SPARC\_LAB test facility to fully characterize each stage of the photocathode "life" and to have a complete overview of the photoemission properties in high brightness photo-injectors. The nano(n)-machining process presented here consists in diamond milling, and blowing with dry nitrogen. This procedure reduces the roughness of the cathode surface and prevents surface contamination introduced by other techniques, such as polishing with diamond paste or the machining with oil. Both high roughness and surface contamination cause an increase of intrinsic emittance and consequently a reduction of the overall electron beam brightness. To quantify these effects, we have characterized the photocathode surface in terms of roughness measurement, and morphology and chemical composition analysis by means of Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS), and Atomic Force Microscopy (AFM) techniques. The effects of n-machining on the electron beam quality have been also investigated through emittance measurements before and after the surface processing technique. Finally, we present preliminary emittance studies of yttrium thin film on Cu photocathodes.
△ Less
Submitted 11 January, 2018;
originally announced January 2018.
-
Observation of hard radiations in a laboratory atmospheric high-voltage discharge
Authors:
A. V. Agafonov,
V. A. Bogachenkov,
A. P. Chubenko,
A. V. Oginov,
A. A. Rodionov,
A. S. Rusetskiy,
V. A. Ryabov,
A. L. Shepetov,
K. V. Shpakov
Abstract:
The new results concerning neutron emission detection from a laboratory high-voltage discharge in the air are presented. Data were obtained with a combination of plastic scintillation detectors and $^3$He filled counters of thermal neutrons. Strong dependence of the hard x-ray and neutron radiation appearance on the field strength near electrodes, which is determined by their form, was found. We h…
▽ More
The new results concerning neutron emission detection from a laboratory high-voltage discharge in the air are presented. Data were obtained with a combination of plastic scintillation detectors and $^3$He filled counters of thermal neutrons. Strong dependence of the hard x-ray and neutron radiation appearance on the field strength near electrodes, which is determined by their form, was found. We have revealed a more sophisticated temporal structure of the neutron bursts observed during of electric discharge. This may indicate different mechanisms for generating penetrating radiation at the time formation and development of the atmospheric discharge.
△ Less
Submitted 26 April, 2016;
originally announced April 2016.
-
Diffraction Radiation of Electron Bunches for One- and Two Slit Systems
Authors:
V. Shpakov,
S. Dabagov
Abstract:
New research in acceleration physics leads to growing up the power of charged particles bunches. Existed methods based on interaction of detection devices with bunches do not satisfy our need, because of the fact that new high intensity bunches can damage this devices. Moreover, these methods do not allow analyzing the bunches in real time. Recently new technique based on ODRI (optical diffraction…
▽ More
New research in acceleration physics leads to growing up the power of charged particles bunches. Existed methods based on interaction of detection devices with bunches do not satisfy our need, because of the fact that new high intensity bunches can damage this devices. Moreover, these methods do not allow analyzing the bunches in real time. Recently new technique based on ODRI (optical diffraction radiation interference) by a bunch at its propagation through the slit was proposed. In this work the results of theoretical simulations on diffraction radiation, in particular ODRI, by electrons for various slit systems as well as the comparison with the DESY experimental data are presented.
△ Less
Submitted 25 August, 2014;
originally announced August 2014.
-
Observation of neutron bursts produced by laboratory high-voltage atmospheric discharge
Authors:
A. V. Agafonov,
A. V. Bagulya,
O. D. Dalkarov,
M. A. Negodaev,
A. V. Oginov,
A. S. Rusetskiy,
V. A. Ryabov,
K. V. Shpakov
Abstract:
Data on the observation of neutron bursts in the process of high-voltage discharge in the air at an average electric field strength ~ 1 MV/m and discharge current ~ 10 kA are presented. Two independent methods (CR-39 track detectors and plastic scintillation detectors) registered neutrons within the range from thermal energies up to the energies above 10 MeV with the flux of >= 1E6 neutrons per sh…
▽ More
Data on the observation of neutron bursts in the process of high-voltage discharge in the air at an average electric field strength ~ 1 MV/m and discharge current ~ 10 kA are presented. Two independent methods (CR-39 track detectors and plastic scintillation detectors) registered neutrons within the range from thermal energies up to the energies above 10 MeV with the flux of >= 1E6 neutrons per shot into 4π solid angle.
△ Less
Submitted 9 April, 2013;
originally announced April 2013.
