-
Heat transport model for the transition between scaling regimes in quasistatic and full magnetoconvection
Authors:
Matthew McCormack,
Andrei Teimurazov,
Olga Shishkina,
Moritz Linkmann
Abstract:
In magnetoconvection, the flow is governed by the interplay between gravitational buoyancy and the Lorentz force, with one of these forces dominating in different regimes. In this paper, we develop a model with a single adjustable parameter that accurately captures the smooth transition from a buoyancy-dominated regime to one dominated by the Lorentz force. A perturbative extension of the model ac…
▽ More
In magnetoconvection, the flow is governed by the interplay between gravitational buoyancy and the Lorentz force, with one of these forces dominating in different regimes. In this paper, we develop a model with a single adjustable parameter that accurately captures the smooth transition from a buoyancy-dominated regime to one dominated by the Lorentz force. A perturbative extension of the model accounts for distinct transition features that occur at high Prandtl numbers. We validate the model for magnetoconvection in both the quasistatic regime and at finite magnetic Reynolds numbers using data from direct numerical simulations and existing experimental data sets. The model contains a natural extension to rotating convection and offers a potential generalisation to rotating magnetoconvection.
△ Less
Submitted 9 January, 2025;
originally announced January 2025.
-
Ultimate regime of Rayleigh-Benard turbulence: Sub-regimes and their scaling relations for Nu vs. Ra and Pr
Authors:
Olga Shishkina,
Detlef Lohse
Abstract:
We offer a new model for the heat transfer and the turbulence intensity in strongly driven Rayleigh-Benard turbulence (the so-called ultimate regime), which in contrast to hitherto models is consistent with the new mathematically exact heat transfer upper bound of Choffrut et al. [J. Differential Equations 260, 3860 (2016)] and thus enables extrapolations of the heat transfer to geo- and astrophys…
▽ More
We offer a new model for the heat transfer and the turbulence intensity in strongly driven Rayleigh-Benard turbulence (the so-called ultimate regime), which in contrast to hitherto models is consistent with the new mathematically exact heat transfer upper bound of Choffrut et al. [J. Differential Equations 260, 3860 (2016)] and thus enables extrapolations of the heat transfer to geo- and astrophysical flows. The model distinguishes between four subregimes of the ultimate regime and well describes the measured heat transfer in various large-Ra experiments. In this new representation, which properly accounts for the Prandtl number dependence, the onset to the ultimate regime is seen in all available large-Ra data sets, though at different Rayleigh numbers, as to be expected for a non-normal-nonlinear instability.
△ Less
Submitted 23 July, 2024;
originally announced July 2024.
-
Scaling relations for heat and momentum transport in sheared Rayleigh-Bénard convection
Authors:
Guru Sreevanshu Yerragolam,
Christopher J. Howland,
Richard J. A. M. Stevens,
Roberto Verzicco,
Olga Shishkina,
Detlef Lohse
Abstract:
We provide scaling relations for the Nusselt number $Nu$ and the friction coefficient $C_{S}$ in sheared Rayleigh-Bénard convection, i.e., in Rayleigh-Bénard flow with Couette or Poiseuille type shear forcing, by extending the Grossmann & Lohse (2000,2001,2002,2004) theory to sheared thermal convection. The control parameters for these systems are the Rayleigh number $Ra$, the Prandtl number $Pr$,…
▽ More
We provide scaling relations for the Nusselt number $Nu$ and the friction coefficient $C_{S}$ in sheared Rayleigh-Bénard convection, i.e., in Rayleigh-Bénard flow with Couette or Poiseuille type shear forcing, by extending the Grossmann & Lohse (2000,2001,2002,2004) theory to sheared thermal convection. The control parameters for these systems are the Rayleigh number $Ra$, the Prandtl number $Pr$, and the Reynolds number $Re_S$ that characterises the strength of the imposed shear. By direct numerical simulations and theoretical considerations, we show that in turbulent Rayleigh-Bénard convection, the friction coefficients associated with the applied shear and the shear generated by the large-scale convection rolls are both well described by Prandtl's (1932) logarithmic friction law, suggesting some kind of universality between purely shear driven flows and thermal convection. These scaling relations hold well for $10^6 \leq Ra \leq 10^8$, $0.5 \leq Pr \leq 5.0$, and $0 \leq Re_S \leq 10^4$.
△ Less
Submitted 8 July, 2024; v1 submitted 7 March, 2024;
originally announced March 2024.
-
Wall modes and the transition to bulk convection in rotating Rayleigh-Bénard convection
Authors:
Xuan Zhang,
Philipp Reiter,
Olga Shishkina,
Robert E. Ecke
Abstract:
We investigate states of rapidly rotating Rayleigh-Bénard convection in a cylindrical cell over a range of Rayleigh number $3\times10^5\leq Ra \leq 5\times10^{9}$ and Ekman number $10^{-6} \leq Ek \leq 10^{-4}$ for Prandtl number $Pr = 0.8$ and aspect ratios $1/5 \leq Γ\leq 5$ using direct numerical simulations. We characterize, for perfectly insulating sidewall boundary conditions, the first tran…
▽ More
We investigate states of rapidly rotating Rayleigh-Bénard convection in a cylindrical cell over a range of Rayleigh number $3\times10^5\leq Ra \leq 5\times10^{9}$ and Ekman number $10^{-6} \leq Ek \leq 10^{-4}$ for Prandtl number $Pr = 0.8$ and aspect ratios $1/5 \leq Γ\leq 5$ using direct numerical simulations. We characterize, for perfectly insulating sidewall boundary conditions, the first transition to convection via wall mode instability and the nonlinear growth and instability of the resulting wall mode states including a secondary transition to time dependence. We show how the radial structure of the vertical velocity $u_z$ and the temperature $T$ is captured well by the linear eigenfunctions of the wall mode instability where the radial width of $u_z$ is $δ_{u_z} \sim Ek^{1/3} r/H$ whereas $δ_T \sim e^{-k r}$ ($k$ is the wavenumber of an laterally infinite wall mode state). The disparity in spatial scales for $Ek = 10^{-6}$ means that the heat transport is dominated by the radial structure of $u_z$ since $T$ varies slowly over the radial scale $δ_{u_z}$. We further describe how the transition to a state of bulk convection is influenced by the presence of the wall mode states. We use temporal and spatial scales as measures of the local state of convection and the Nusselt number $Nu$ as representative of global transport. Our results elucidate the evolution of the wall state of rotating convection and confirm that wall modes are strongly linked with the boundary zonal flow (BZF) being the robust remnant of nonlinear wall mode states. We also show how the heat transport ($Nu$) contributions of wall modes and bulk modes are related and discuss approaches to disentangling their relative contributions.
△ Less
Submitted 13 April, 2024; v1 submitted 29 October, 2023;
originally announced October 2023.
-
Wall mode dynamics and transition to chaos in magnetoconvection with a vertical magnetic field
Authors:
Matthew McCormack,
Andrei Teimurazov,
Olga Shishkina,
Moritz Linkmann
Abstract:
Quasistatic magnetoconvection of a low Prandtl number fluid ($\textrm{Pr}=0.025)$ with a vertical magnetic field is considered in a unit aspect ratio box with no-slip boundaries. At high relative magnetic field strengths, given by the Hartmann number $\textrm{Ha}$, the onset of convection is known to result from a sidewall instability giving rise to the wall mode regime. Here, we carry out 3D dire…
▽ More
Quasistatic magnetoconvection of a low Prandtl number fluid ($\textrm{Pr}=0.025)$ with a vertical magnetic field is considered in a unit aspect ratio box with no-slip boundaries. At high relative magnetic field strengths, given by the Hartmann number $\textrm{Ha}$, the onset of convection is known to result from a sidewall instability giving rise to the wall mode regime. Here, we carry out 3D direct numerical simulations of unprecedented length to map out the parameter space at $\textrm{Ha} = 200, 500, 1000$, varying the Rayleigh number ($\textrm{Ra}$) between $6\times10^5 \lesssim \textrm{Ra} \lesssim 5\times 10^8$. We track the development of stable equilibria produced by this primary instability, identify bifurcations leading to limit cycles, and eventually to chaotic dynamics. At {$\textrm{Ha}=200$}, the steady wall mode solution undergoes a symmetry-breaking bifurcation producing a state featuring a coexistence between wall modes and a large-scale roll in the centre of the domain which persists to higher $\textrm{Ra}$. However, under a stronger magnetic field at $\textrm{Ha}=1000$, the steady wall mode solution undergoes a Hopf bifurcation producing a limit cycle which further develops to solutions that shadow an orbit homoclinic to a saddle point. Upon a further increase in $\textrm{Ra}$, the system undergoes a subsequent symmetry break producing a coexistence between wall modes and a large-scale roll, although the large-scale roll exists only for a small range of $\textrm{Ra}$, and chaotic dynamics primarily arise due to a mixture of chaotic wall mode dynamics and arrays of cellular structures.
△ Less
Submitted 1 December, 2023; v1 submitted 29 August, 2023;
originally announced August 2023.
-
Unifying heat transport model for the transition between buoyancy-dominated and Lorentz-force-dominated regimes in quasistatic magnetoconvection
Authors:
Andrei Teimurazov,
Matthew McCormack,
Moritz Linkmann,
Olga Shishkina
Abstract:
In magnetoconvection, the flow of electromagnetically conductive fluid is driven by a combination of buoyancy forces, which create the fluid motion due to thermal expansion and contraction, and Lorentz forces, which distort the convective flow structure in the presence of a magnetic field. The differences in the global flow structures in the buoyancy-dominated and Lorentz-force-dominated regimes l…
▽ More
In magnetoconvection, the flow of electromagnetically conductive fluid is driven by a combination of buoyancy forces, which create the fluid motion due to thermal expansion and contraction, and Lorentz forces, which distort the convective flow structure in the presence of a magnetic field. The differences in the global flow structures in the buoyancy-dominated and Lorentz-force-dominated regimes lead to different heat transport properties in these regimes, reflected in distinct dimensionless scaling relations of the global heat flux (Nusselt number $\textrm{Nu}$) versus the strength of buoyancy (Rayleigh number $\textrm{Ra}$) and electromagnetic forces (Hartmann number $\textrm{Ha}$). Here, we propose a theoretical model for the transition between these two regimes for the case of a quasistatic vertical magnetic field applied to a convective fluid layer confined between two isothermal, a lower warmer and an upper colder, horizontal surfaces. The model suggests that the scaling exponents $γ$ in the buoyancy-dominated regime, $\textrm{Nu}\sim\textrm{Ra}^γ$, and $ξ$ in the Lorentz-force-dominated regime, $\textrm{Nu}\sim(\textrm{Ha}^{-2}\textrm{Ra})^ξ$, are related as $ξ=γ/(1-2γ)$, and the onset of the transition scales with $\textrm{Ha}^{-1/γ}\textrm{Ra}$. These theoretical results are supported by our Direct Numerical Simulations for $10\leq \textrm{Ha}\leq2000$, Prandtl number $\textrm{Pr}=0.025$ and $\textrm{Ra}$ up to $10^9$ and data from the literature.
△ Less
Submitted 3 August, 2023;
originally announced August 2023.
-
Scaling regimes in rapidly rotating thermal convection at extreme Rayleigh numbers
Authors:
Jiaxing Song,
Olga Shishkina,
Xiaojue Zhu
Abstract:
The geostrophic turbulence in rapidly rotating thermal convection exhibits characteristics shared by many highly turbulent geophysical and astrophysical flows. In this regime, the convective length and velocity scales, heat flux, and kinetic and thermal dissipation rates are all diffusion-free, meaning that they are independent of the viscosity and thermal diffusivity. Our direct numerical simulat…
▽ More
The geostrophic turbulence in rapidly rotating thermal convection exhibits characteristics shared by many highly turbulent geophysical and astrophysical flows. In this regime, the convective length and velocity scales, heat flux, and kinetic and thermal dissipation rates are all diffusion-free, meaning that they are independent of the viscosity and thermal diffusivity. Our direct numerical simulations (DNS) of rotating Rayleigh--Bénard convection in domains with no-slip top and bottom and periodic lateral boundary conditions for a fluid with the Prandtl number $Pr=1$ and extreme buoyancy and rotation parameters (the Rayleigh number up to $Ra=3\times10^{13}$ and the Ekman number down to $Ek=5\times10^{-9}$) indeed demonstrate these diffusion-free scaling relations, in particular, that the dimensionless convective heat transport scales with the supercriticality parameter $\widetilde{Ra}\equiv Ra\,Ek^{4/3}$ as $Nu-1\propto \widetilde{Ra}^{3/2}$, where $Nu$ is the Nusselt number. We further derive and verify in the DNS that with the decreasing $\widetilde{Ra}$ the geostrophic turbulence regime undergoes a transition into another geostrophic regime where the convective heat transport scales as $Nu-1\propto \widetilde{Ra}^{3}$.
△ Less
Submitted 28 April, 2023;
originally announced April 2023.
-
Oscillatory large-scale circulation in liquid-metal thermal convection and its structural unit
Authors:
Andrei Teimurazov,
Sanjay Singh,
Sylvie Su,
Sven Eckert,
Olga Shishkina,
Tobias Vogt
Abstract:
In Rayleigh-Bénard convection (RBC), the size of a flow domain and its aspect ratio $\varGamma$ (a ratio between the spatial length and height of the domain) affect the shape of the large-scale circulation (LSC). For some aspect ratios, the flow dynamics include a three-dimensional oscillatory mode known as a jump-rope vortex (JRV), however, the effects of varying aspect ratios on this mode are no…
▽ More
In Rayleigh-Bénard convection (RBC), the size of a flow domain and its aspect ratio $\varGamma$ (a ratio between the spatial length and height of the domain) affect the shape of the large-scale circulation (LSC). For some aspect ratios, the flow dynamics include a three-dimensional oscillatory mode known as a jump-rope vortex (JRV), however, the effects of varying aspect ratios on this mode are not well investigated. In this paper, we study these aspect-ratio effects in liquid metals, for a low Prandtl number $Pr=0.03$. Direct numerical simulations and experiments are carried out for a Rayleigh number range $2.9 \times 10^4 \leq Ra \leq 1.6 \times 10^6$ and square cuboid domains with $\varGamma=2$, $2.5$, $3$ and $5$. Our study demonstrates that a repeating pattern of a JRV encountered at an aspect ratio $\varGamma \approx 2.5$ is the basic structural unit that builds up to a lattice of interlaced JRVs at the largest aspect ratio. The size of the domain determines how many structural units are self-organized within the domain; the number of the realized units is expected to scale as $\varGamma^2$ with sufficiently large and growing $\varGamma$. We find the oscillatory modes for all investigated $\varGamma$, however, they are more pronounced for $\varGamma=2.5$ and $\varGamma=5$. Future studies for large-aspect ratio domains of different shapes would enhance our understanding of how the JRVs adjust and reorganize at such scaled-up geometries, and answer the question of whether they are indeed the smallest superstructure units.
△ Less
Submitted 22 April, 2023;
originally announced April 2023.
-
Connecting wall modes and boundary zonal flows in rotating Rayleigh--Bénard convection
Authors:
Robert E. Ecke,
Xuan Zhang,
Olga Shishkina
Abstract:
Using direct numerical simulations, we study rotating Rayleigh-Bénard convection in a cylindrical cell for a broad range of Rayleigh, Ekman, and Prandtl numbers from the onset of wall modes to the geostrophic regime, an extremely important one in geophysical and astrophysical contexts. We connect linear wall-mode states that occur prior to the onset of bulk convection with the boundary zonal flow…
▽ More
Using direct numerical simulations, we study rotating Rayleigh-Bénard convection in a cylindrical cell for a broad range of Rayleigh, Ekman, and Prandtl numbers from the onset of wall modes to the geostrophic regime, an extremely important one in geophysical and astrophysical contexts. We connect linear wall-mode states that occur prior to the onset of bulk convection with the boundary zonal flow that coexists with turbulent bulk convection in the geostrophic regime through the continuity of length and time scales and of convective heat transport. We quantitatively collapse drift frequency, boundary length, and heat transport data from numerous sources over many orders of magnitude in Rayleigh and Ekman numbers. Elucidating the heat transport contributions of wall modes and of the boundary zonal flow are critical for characterizing the properties of the geostrophic regime of rotating convection in finite, physical containers and is crucial for connecting the geostrophic regime of laboratory convection with geophysical and astrophysical systems.
△ Less
Submitted 13 September, 2021; v1 submitted 14 June, 2021;
originally announced June 2021.
-
Crossover of the relative heat transport contributions of plume ejecting and impacting zones in turbulent Rayleigh-Bénard convection
Authors:
Philipp Reiter,
Olga Shishkina,
Detlef Lohse,
Dominik Krug
Abstract:
Turbulent thermal convection is characterized by the formation of large-scale structures and strong spatial inhomogeneity. This work addresses the relative heat transport contributions of the large-scale plume ejecting versus plume impacting zones in turbulent Rayleigh-Bénard convection. Based on direct numerical simulations of the two dimensional (2-D) problem, we show the existence of a crossove…
▽ More
Turbulent thermal convection is characterized by the formation of large-scale structures and strong spatial inhomogeneity. This work addresses the relative heat transport contributions of the large-scale plume ejecting versus plume impacting zones in turbulent Rayleigh-Bénard convection. Based on direct numerical simulations of the two dimensional (2-D) problem, we show the existence of a crossover in the wall heat transport from initially impacting dominated to ultimately ejecting dominated at a Rayleigh number of $Ra\approx 3 \times 10^{11}$. This is consistent with the trends observed in 3-D convection at lower Ra, and we therefore expect a similar crossover to also occur there. We identify the development of a turbulent mixing zone, connected to thermal plume emission, as the primary mechanism for the crossover. The mixing zone gradually extends vertically and horizontally, therefore becoming more and more dominant for the overall heat transfer.
△ Less
Submitted 8 April, 2021; v1 submitted 7 April, 2021;
originally announced April 2021.
-
Universal properties of penetrative turbulent Rayleigh--Bénard convection in cold water near $4^\circ\rm{C}$
Authors:
Qi Wang,
Philipp Reiter,
Detlef Lohse,
Olga Shishkina
Abstract:
Penetrative turbulence, which occurs in a convectively unstable fluid layer and penetrates into an adjacent, originally stably stratified layer, is numerically and theoretically analyzed. We chose the most relevant example, namely thermally driven flow of water with a temperature around $T_m\approx 4^\circ\rm{C}$, where it has its density maximum. We pick the Rayleigh-Bénard geometry with the bott…
▽ More
Penetrative turbulence, which occurs in a convectively unstable fluid layer and penetrates into an adjacent, originally stably stratified layer, is numerically and theoretically analyzed. We chose the most relevant example, namely thermally driven flow of water with a temperature around $T_m\approx 4^\circ\rm{C}$, where it has its density maximum. We pick the Rayleigh-Bénard geometry with the bottom plate temperature $T_b > 4^\circ\rm{C}$ and the top plate temperature $T_t \le 4^\circ\rm{C}$. Next to the overall thermal driving strength set by the temperature difference $Δ= T_b - T_t$ (the Rayleigh number $Ra$ in dimensionless form), the crucial new control parameter as compared to standard Rayleigh-Bénard convection is the density inversion parameter $θ_m \equiv (T_m - T_t ) / Δ$. The crucial response parameters are the relative mean mid-height temperature $θ_c$ and the overall heat transfer (i.e., the Nusselt number $Nu$). We theoretically derive the universal (i.e., $Ra$-independent) dependence $θ_c (θ_m) =(1+θ_m^2)/2$, which holds for $θ_m$ below a $Ra$-dependent critical value, beyond which $θ_c (θ_m)$ sharply decreases and drops down to $θ_c=1/2$ at $θ_m=θ_{m,c}$. Our direct numerical simulations with $Ra$ up to $10^{10}$ are consistent with these results. The critical density inversion parameter $θ_{m,c}$ can be precisely predicted by a linear stability analysis. The heat flux $Nu(θ_m)$ monotonically decreases with increasing $θ_m$ and we can theoretically derive a universal relation for the relative heat flux $Nu(θ_m)/Nu(0)$. Finally, we numerically identify and discuss rare transitions between different turbulent flow states for large $θ_m$.
△ Less
Submitted 16 December, 2020;
originally announced December 2020.
-
Regime transitions in thermally driven high-Rayleigh number vertical convection
Authors:
Qi Wang,
Hao-Ran Liu,
Roberto Verzicco,
Olga Shishkina,
Detlef Lohse
Abstract:
Vertical convection is investigated using direct numerical simulations over a wide range of Rayleigh numbers $10^7\le Ra\le10^{14}$ with fixed Prandtl number $Pr=10$, in a two-dimensional convection cell with unit aspect ratio. It is found that the dependence of the mean vertical centre temperature gradient $S$ on $Ra$ shows three different regimes: In regime I ($Ra \lesssim 5\times10^{10}$), $S$…
▽ More
Vertical convection is investigated using direct numerical simulations over a wide range of Rayleigh numbers $10^7\le Ra\le10^{14}$ with fixed Prandtl number $Pr=10$, in a two-dimensional convection cell with unit aspect ratio. It is found that the dependence of the mean vertical centre temperature gradient $S$ on $Ra$ shows three different regimes: In regime I ($Ra \lesssim 5\times10^{10}$), $S$ is almost independent of $Ra$; In the newly identified regime II ($5\times10^{10} \lesssim Ra \lesssim 10^{13}$), $S$ first increases with increasing $Ra$ (regime ${\rm{II}}_a$), reaches its maximum and then decreases again (regime ${\rm{II}}_b$); In regime III ($Ra\gtrsim10^{13}$), $S$ again becomes only weakly dependent on $Ra$, being slightly smaller than in regime I. The transitions between diffeereent regimes are discussd. In the three different regimes, significantly different flow organizations are identified: In regime I and regime ${\rm{II}}_a$, the location of the maximal horizontal velocity is close to the top and bottom walls; However, in regime ${\rm{II}}_b$ and regime III, banded zonal flow structures develop and the maximal horizontal velocity now is in the bulk region.
The different flow organizations in the three regimes are also reflected in the scaling exponents in the effective power law scalings $Nu\sim Ra^β$ and $Re\sim Ra^γ$. In regime I, the fitted scaling exponents ($β\approx0.26$ and $γ\approx0.51$) are in excellent agreement with the theoretical predication of $β=1/4$ and $γ=1/2$ for laminar VC (Shishkina, {\it{Phys. Rev. E.}} 2016, 93, 051102). However, in regimes II and III, $β$ increases to a value close to 1/3 and $γ$ decreases to a value close to 4/9. The stronger $Ra$ dependence of $Nu$ is related to the ejection of plumes and larger local heat flux at the walls.
△ Less
Submitted 30 November, 2020;
originally announced November 2020.
-
Scaling in internally heated convection: a unifying theory
Authors:
Qi Wang,
Detlef Lohse,
Olga Shishkina
Abstract:
We offer a unifying theory for turbulent purely internally heated convection, generalizing the unifying theories of Grossmann and Lohse (2000, 2001) for Rayleigh--Bénard turbulence and of Shishkina, Grossmann and Lohse (2016) for turbulent horizontal convection, which are both based on the splitting of the kinetic and thermal dissipation rates in respective boundary and bulk contributions. We obta…
▽ More
We offer a unifying theory for turbulent purely internally heated convection, generalizing the unifying theories of Grossmann and Lohse (2000, 2001) for Rayleigh--Bénard turbulence and of Shishkina, Grossmann and Lohse (2016) for turbulent horizontal convection, which are both based on the splitting of the kinetic and thermal dissipation rates in respective boundary and bulk contributions. We obtain the mean temperature of the system and the Reynolds number (which are the response parameters) as function of the control parameters, namely the internal thermal driving strength (called, when nondimensionalized, the Rayleigh--Roberts number) and the Prandtl number. The results of the theory are consistent with our direct numerical simulations.
△ Less
Submitted 12 October, 2020;
originally announced October 2020.
-
Boundary zonal flows in rapidly rotating turbulent thermal convection
Authors:
Xuan Zhang,
Robert E. Ecke,
Olga Shishkina
Abstract:
Recently, in Zhang et al. (2020), it was found that in rapidly rotating turbulent Rayleigh-Bénard convection (RBC) in slender cylindrical containers (with diameter-to-height aspect ratio $Γ=1/2$) filled with a small-Prandtl-number fluid ($Pr \approx0.8$), the Large Scale Circulation (LSC) is suppressed and a Boundary Zonal Flow (BZF) develops near the sidewall, characterized by a bimodal PDF of th…
▽ More
Recently, in Zhang et al. (2020), it was found that in rapidly rotating turbulent Rayleigh-Bénard convection (RBC) in slender cylindrical containers (with diameter-to-height aspect ratio $Γ=1/2$) filled with a small-Prandtl-number fluid ($Pr \approx0.8$), the Large Scale Circulation (LSC) is suppressed and a Boundary Zonal Flow (BZF) develops near the sidewall, characterized by a bimodal PDF of the temperature, cyclonic fluid motion, and anticyclonic drift of the flow pattern (with respect to the rotating frame). This BZF carries a disproportionate amount ($>60\%$) of the total heat transport for $Pr < 1$ but decreases rather abruptly for larger $Pr$ to about $35\%$. In this work, we show that the BZF is robust and appears in rapidly rotating turbulent RBC in containers of different $Γ$ and in a broad range of $Pr$ and $Ra$. Direct numerical simulations for $0.1 \leq Pr \leq 12.3$, $10^7 \leq Ra \leq 5\times10^{9}$, $10^{5} \leq 1/Ek \leq 10^{7}$ and $Γ$ = 1/3, 1/2, 3/4, 1 and 2 show that the BZF width $δ_0$ scales with the Rayleigh number $Ra$ and Ekman number $Ek$ as $δ_0/H \sim Γ^{0} \Pr^{\{-1/4, 0\}} Ra^{1/4} Ek^{2/3}$ (${Pr<1, Pr>1}$) and the drift frequency as $ω/Ω\sim Γ^{0} Pr^{-4/3} Ra Ek^{5/3}$, where $H$ is the cell height and $Ω$ the angular rotation rate. The mode number of the BZF is 1 for $Γ\lesssim 1$ and $2 Γ$ for $Γ$ = {1,2} independent of $Ra$ and $Pr$. The BZF is quite reminiscent of wall mode states in rotating convection.
△ Less
Submitted 8 March, 2021; v1 submitted 7 September, 2020;
originally announced September 2020.
-
Generation of zonal flows in convective systems by travelling thermal waves
Authors:
Philipp Reiter,
Xuan Zhang,
Rodion Stepanov,
Olga Shishkina
Abstract:
This work addresses the effect of travelling thermal waves applied at the fluid layer surface, on the formation of global flow structures in 2D and 3D convective systems. For a broad range of Rayleigh numbers ($10^3\leq Ra \leq 10^7$) and thermal wave frequencies ($10^{-4}\leq Ω\leq 10^{0}$), we investigate flows with and without imposed mean temperature gradients. Our results confirm that the tra…
▽ More
This work addresses the effect of travelling thermal waves applied at the fluid layer surface, on the formation of global flow structures in 2D and 3D convective systems. For a broad range of Rayleigh numbers ($10^3\leq Ra \leq 10^7$) and thermal wave frequencies ($10^{-4}\leq Ω\leq 10^{0}$), we investigate flows with and without imposed mean temperature gradients. Our results confirm that the travelling thermal waves can cause zonal flows, i.e. strong mean horizontal flows. We show that the zonal flows in diffusion dominated regimes are driven purely by the Reynolds stresses, always travelling retrograde, while in convection dominated regimes, mean flow advection, caused by tilted convection cells, becomes dominant, which generally leads to prograde mean zonal flows. By means of direct numerical simulations we validate theoretical predictions made for the diffusion dominated regime. Furthermore, we make use of the linear stability analysis and explain the existence of the tilted convection cell mode. Our extensive 3D simulations support the results for 2D flows and thus confirm the relevance of the findings for geopyhsical and astrophysical systems.
△ Less
Submitted 20 December, 2020; v1 submitted 3 September, 2020;
originally announced September 2020.
-
Data-driven identification of the spatio-temporal structure of turbulent flows by streaming Dynamic Mode Decomposition
Authors:
Rui Yang,
Xuan Zhang,
Philipp Reiter,
Moritz Linkmann,
Detlef Lohse,
Olga Shishkina
Abstract:
Streaming Dynamic Mode Decomposition (sDMD) (Hemati et al., Phys. Fluids 26(2014)) is a low-storage version of Dynamic Mode Decomposition (DMD) (Schmid, J. Fluid Mech. 656 (2010)), a data-driven method to extract spatio-temporal flow patterns. Streaming DMD avoids storing the entire data sequence in memory by approximating the dynamic modes through incremental updates with new available data. In t…
▽ More
Streaming Dynamic Mode Decomposition (sDMD) (Hemati et al., Phys. Fluids 26(2014)) is a low-storage version of Dynamic Mode Decomposition (DMD) (Schmid, J. Fluid Mech. 656 (2010)), a data-driven method to extract spatio-temporal flow patterns. Streaming DMD avoids storing the entire data sequence in memory by approximating the dynamic modes through incremental updates with new available data. In this paper, we use sDMD to identify and extract dominant spatio-temporal structures of different turbulent flows, requiring the analysis of large datasets. First, the efficiency and accuracy of sDMD are compared to the classical DMD, using a publicly available test dataset that consists of velocity field snapshots obtained by direct numerical simulation of a wake flow behind a cylinder. Streaming DMD not only reliably reproduces the most important dynamical features of the flow; our calculations also highlight its advantage in terms of the required computational resources. We subsequently use sDMD to analyse three different turbulent flows that all show some degree of large-scale coherence: rapidly rotating Rayleigh--Bénard convection, horizontal convection and the asymptotic suction boundary layer. Structures of different frequencies and spatial extent can be clearly separated, and the prominent features of the dynamics are captured with just a few dynamic modes. In summary, we demonstrate that sDMD is a powerful tool for the identification of spatio-temporal structures in a wide range of turbulent flows.
△ Less
Submitted 15 June, 2022; v1 submitted 9 June, 2020;
originally announced June 2020.
-
Multiple states in turbulent large-aspect ratio thermal convection: What determines the number of convection rolls?
Authors:
Qi Wang,
Roberto Verzicco,
Detlef Lohse,
Olga Shishkina
Abstract:
Recent findings suggest that wall-bounded turbulent flow can take different statistically stationary turbulent states, with different transport properties, even for the very same values of the control parameters. What state the system takes depends on the initial conditions. Here we analyze the multiple states in large-aspect ratio ($Γ$) two-dimensional turbulent Rayleigh--Bénard flow with no-slip…
▽ More
Recent findings suggest that wall-bounded turbulent flow can take different statistically stationary turbulent states, with different transport properties, even for the very same values of the control parameters. What state the system takes depends on the initial conditions. Here we analyze the multiple states in large-aspect ratio ($Γ$) two-dimensional turbulent Rayleigh--Bénard flow with no-slip plates and horizontally periodic boundary conditions as model system. We determine the number $n$ of convection rolls, their mean aspect ratios $Γ_r = Γ/n$, and the corresponding transport properties of the flow (i.e., the Nusselt number $Nu$), as function of the control parameters Rayleigh ($Ra$) and Prandtl number. The effective scaling exponent $β$ in $Nu \sim Ra^β$ is found to depend on the realized state and thus $Γ_r$, with a larger value for the smaller $Γ_r$. By making use of a generalized Friedrichs inequality, we show that the elliptical instability and viscous damping determine the $Γ_r$-window for the realizable turbulent states. The theoretical results are in excellent agreement with our numerical finding $2/3 \le Γ_r \le 4/3$, where the lower threshold is approached for the larger $Ra$. Finally, we show that the theoretical approach to frame $Γ_r$ also works for free-slip boundary conditions.
△ Less
Submitted 9 May, 2020;
originally announced May 2020.
-
Periodically modulated thermal convection
Authors:
Rui Yang,
Kai Leong Chong,
Qi Wang,
Roberto Verzicco,
Olga Shishkina,
Detlef Lohse
Abstract:
Many natural and industrial turbulent flows are subjected to time-dependent boundary conditions. Despite being ubiquitous, the influence of temporal modulations (with frequency $f$) on global transport properties has hardly been studied. Here, we perform numerical simulations of Rayleigh-Bénard (RB) convection with time periodic modulation in the temperature boundary condition and report how this…
▽ More
Many natural and industrial turbulent flows are subjected to time-dependent boundary conditions. Despite being ubiquitous, the influence of temporal modulations (with frequency $f$) on global transport properties has hardly been studied. Here, we perform numerical simulations of Rayleigh-Bénard (RB) convection with time periodic modulation in the temperature boundary condition and report how this modulation can lead to a significant heat flux (Nusselt number $\rm{Nu}$) enhancement. Using the concept of Stokes thermal boundary layer, we can explain the onset frequency of the Nu enhancement and the optimal frequency at which Nu is maximal, and how they depend on the Rayleigh number Ra and Prandtl number $\rm{Pr}$. From this, we construct a phase diagram in the 3D parameter space ($f$, $\rm{Ra}$, $\rm{Pr}$) and identify: (i) a regime where the modulation is too fast to affect $\rm{Nu}$; (ii) a moderate modulation regime, where $\rm{Nu}$ increases with decreasing $f$ and (iii) slow modulation regime, where $\rm{Nu}$ decreases with further decreasing $f$. Our findings provide a framework to study other types of turbulent flows with time-dependent forcing.
△ Less
Submitted 29 April, 2020;
originally announced April 2020.
-
Elliptical Instability and Multi-Roll Flow Modes of the Large-scale Circulation in Confined Turbulent Rayleigh-Bénard Convection
Authors:
Lukas Zwirner,
Andreas Tilgner,
Olga Shishkina
Abstract:
Turbulent Rayleigh-Bénard convection in slender cylindrical cells exhibits rich dynamics of the large-scale circulation (LSC), with several rolls stacked on top of each other. We propose that the elliptical instability is the mechanism which causes the twisting and breaking of the LSC into multiple rolls and that the volume-averaged heat and momentum transport, represented by the Nusselt number an…
▽ More
Turbulent Rayleigh-Bénard convection in slender cylindrical cells exhibits rich dynamics of the large-scale circulation (LSC), with several rolls stacked on top of each other. We propose that the elliptical instability is the mechanism which causes the twisting and breaking of the LSC into multiple rolls and that the volume-averaged heat and momentum transport, represented by the Nusselt number and Reynolds number, is generally weaker for larger number $n$ of the LSC rolls. This is supported by direct numerical simulations for $Ra=5\times10^5$, $Pr=0.1$, $H=5D$ and $1\leq~n\leq4$.
△ Less
Submitted 17 February, 2020;
originally announced February 2020.
-
Boundary Zonal Flow in Rotating Turbulent Rayleigh-Bénard Convection
Authors:
Xuan Zhang,
Dennis P. M. van Gils,
Susanne Horn,
Marcel Wedi,
Lukas Zwirner,
Guenter Ahlers,
Robert E. Ecke,
Stephan Weiss,
Eberhard Bodenschatz,
Olga Shishkina
Abstract:
For rapidly rotating turbulent Rayleigh--Bénard convection in a slender cylindrical cell, experiments and direct numerical simulations reveal a boundary zonal flow (BZF) that replaces the classical large-scale circulation. The BZF is located near the vertical side wall and enables enhanced heat transport there. Although the azimuthal velocity of the BZF is cyclonic (in the rotating frame), the tem…
▽ More
For rapidly rotating turbulent Rayleigh--Bénard convection in a slender cylindrical cell, experiments and direct numerical simulations reveal a boundary zonal flow (BZF) that replaces the classical large-scale circulation. The BZF is located near the vertical side wall and enables enhanced heat transport there. Although the azimuthal velocity of the BZF is cyclonic (in the rotating frame), the temperature is an anticyclonic traveling wave of mode one whose signature is a bimodal temperature distribution near the radial boundary. The BZF width is found to scale like $Ra^{1/4}Ek^{2/3}$ where the Ekman number $Ek$ decreases with increasing rotation rate.
△ Less
Submitted 21 November, 2019;
originally announced November 2019.
-
Inclined turbulent thermal convection in liquid sodium
Authors:
Lukas Zwirner,
Ruslan Khalilov,
Ilya Kolesnichenko,
Andrey Mamykin,
Sergei Mandrykin,
Alexander Pavlinov,
Alexander Shestakov,
Andrei Teimurazov,
Peter Frick,
Olga Shishkina
Abstract:
Inclined turbulent thermal convection by large Rayleigh numbers in extremely small-Prandtl-number fluids is studied based on results of both, measurements and high-resolution numerical simulations. The Prandtl number $Pr\approx0.0093$ considered in the experiments and the Large-Eddy Simulations (LES) and $Pr=0.0094$ considered in the Direct Numerical Simulations (DNS) correspond to liquid sodium,…
▽ More
Inclined turbulent thermal convection by large Rayleigh numbers in extremely small-Prandtl-number fluids is studied based on results of both, measurements and high-resolution numerical simulations. The Prandtl number $Pr\approx0.0093$ considered in the experiments and the Large-Eddy Simulations (LES) and $Pr=0.0094$ considered in the Direct Numerical Simulations (DNS) correspond to liquid sodium, which is used in the experiments. Also similar are the studied Rayleigh numbers, which are, respectively, $Ra=1.67\times10^7$ in the DNS, $Ra=1.5\times10^7$ in the LES and $Ra=1.42\times10^7$ in the measurements. The working convection cell is a cylinder with equal height and diameter, where one circular surface is heated and another one is cooled. The cylinder axis is inclined with respect to the vertical and the inclination angle varies from $β=0^\circ$, which corresponds to a Rayleigh-Bénard configuration (RBC), to $β=90^\circ$, as in a vertical convection (VC) setup. The turbulent heat and momentum transport as well as time-averaged and instantaneous flow structures and their evolution in time are studied in detail, for different inclination angles, and are illustrated also by supplementary videos, obtained from the DNS and experimental data.
To investigate the scaling relations of the mean heat and momentum transport in the limiting cases of RBC and VC configurations, additional measurements are conducted for about one decade of the Rayleigh numbers around $Ra=10^7$ and $Pr\approx0.009$. With respect to the turbulent heat transport in inclined thermal convection by low $Pr$, a similarity of the global flow characteristics for the same value of $RaPr$ is proposed and analysed, based on the above simulations and measurements and on complementary DNS for $Ra=1.67\times10^6$, $Pr=0.094$ and $Ra=10^9$, $Pr=1$.
△ Less
Submitted 3 April, 2019;
originally announced April 2019.
-
Comparison of computational codes for direct numerical simulations of turbulent Rayleigh-Bénard convection
Authors:
Gijs L. Kooij,
Mikhail A. Botchev,
Edo M. A. Frederix,
Bernard J. Geurts,
Susanne Horn,
Detlef Lohse,
Erwin P. van der Poel,
Olga Shishkina,
Richard J. A. M. Stevens,
Roberto Verzicco
Abstract:
Computational codes for direct numerical simulations of Rayleigh-Bénard (RB) convection are compared in terms of computational cost and quality of the solution. As a benchmark case, RB convection at $Ra=10^8$ and $Pr=1$ in a periodic domain, in cubic and cylindrical containers is considered. A dedicated second-order finite-difference code (AFID/RBflow) and a specialized fourth-order finite-volume…
▽ More
Computational codes for direct numerical simulations of Rayleigh-Bénard (RB) convection are compared in terms of computational cost and quality of the solution. As a benchmark case, RB convection at $Ra=10^8$ and $Pr=1$ in a periodic domain, in cubic and cylindrical containers is considered. A dedicated second-order finite-difference code (AFID/RBflow) and a specialized fourth-order finite-volume code (Goldfish) are compared with a general purpose finite-volume approach (OpenFOAM) and a general purpose spectral-element code (Nek5000). Reassuringly, all codes provide predictions of the average heat transfer that converge to the same values. The computational costs, however, are found to differ considerably. The specialized codes AFID/RBflow and Goldfish are found to excel in efficiency, outperforming the general purpose flow solvers Nek5000 and OpenFOAM by an order of magnitude with an error on the Nusselt number $Nu$ below $5\%$. However, we find that $Nu$ alone is not sufficient to assess the quality of the numerical results: in fact, instantaneous snapshots of the temperature field from a near wall region obtained for deliberately under-resolved simulations using Nek5000 clearly indicate inadequate flow resolution even when $Nu$ is converged. Overall, dedicated special purpose codes for RB convection are found to be more efficient than general purpose codes.
△ Less
Submitted 25 February, 2018;
originally announced February 2018.
-
Effect of Prandtl number on heat transport enhancement in Rayleigh-Bénard convection under geometrical confinement
Authors:
Kai Leong Chong,
Sebastian Wagner,
Matthias Kaczorowski,
Olga Shishkina,
Ke-Qing Xia
Abstract:
We study, using direct numerical simulations, the effect of geometrical confinement on heat transport and flow structure in Rayleigh-Bénard convection in fluids with different Prandtl numbers. Our simulations span over two decades of Prandtl number $Pr$, $0.1 \leq Pr \leq 40$, with the Rayleigh number $Ra$ fixed at $10^8$. The width-to-height aspect ratio $Γ$ spans between $0.025$ and $0.25$ while…
▽ More
We study, using direct numerical simulations, the effect of geometrical confinement on heat transport and flow structure in Rayleigh-Bénard convection in fluids with different Prandtl numbers. Our simulations span over two decades of Prandtl number $Pr$, $0.1 \leq Pr \leq 40$, with the Rayleigh number $Ra$ fixed at $10^8$. The width-to-height aspect ratio $Γ$ spans between $0.025$ and $0.25$ while the length-to-height aspect ratio is fixed at one. We first find that for $Pr \geq 0.5$, geometrical confinement can lead to a significant enhancement in heat transport as characterized by the Nusselt number $Nu$. For those cases, $Nu$ is maximal at a certain $Γ= Γ_{opt}$. It is found that $Γ_{opt}$ exhibits a power-law relation with $Pr$ as $Γ_{opt}=0.11Pr^{-0.06}$, and the maximal relative enhancement generally increases with $Pr$ over the explored parameter range. As opposed to the situation of $Pr \geq 0.5$, confinement-induced enhancement in $Nu$ is not realized for smaller values of $Pr$, such as $0.1$ and $0.2$. The $Pr$ dependence of the heat transport enhancement can be understood in its relation to the coverage area of the thermal plumes over the thermal boundary layer (BL) where larger coverage is observed for larger $Pr$ due to a smaller thermal diffusivity. We further show that $Γ_{opt}$ is closely related to the crossing of thermal and momentum BLs, and find that $Nu$ declines sharply when the thickness ratio of the thermal and momentum BLs exceeds a certain value of about one. In addition, through examining the temporally averaged flow fields and 2D mode decomposition, it is found that for smaller $Pr$ the large-scale circulation is robust against the geometrical confinement of the convection cell.
△ Less
Submitted 21 September, 2017;
originally announced September 2017.
-
Mean Temperature Profiles in Turbulent Thermal Convection
Authors:
Olga Shishkina,
Susanne Horn,
Mohammad S. Emran,
Emily S. C. Ching
Abstract:
To predict the mean temperature profiles in turbulent thermal convection, the thermal boundary layer (BL) equation including the effects of fluctuations has to be solved. In Shishkina et al., Phys. Rev. Lett. 114 (2015), the thermal BL equation with the fluctuations taken into account as an eddy thermal diffusivity has been solved for large Prandtl-number fluids for which the eddy thermal diffusiv…
▽ More
To predict the mean temperature profiles in turbulent thermal convection, the thermal boundary layer (BL) equation including the effects of fluctuations has to be solved. In Shishkina et al., Phys. Rev. Lett. 114 (2015), the thermal BL equation with the fluctuations taken into account as an eddy thermal diffusivity has been solved for large Prandtl-number fluids for which the eddy thermal diffusivity and the velocity field can be approximated respectively as a cubic and a linear function of the distance from the plate. In the present work we make use of the idea of Prandtl's mixing length model and relate the eddy thermal diffusivity to the stream function. With this proposed relation, we can solve the thermal BL equation and obtain a closed-form expression for the dimensionless mean temperature profile in terms of two independent parameters for fluids with a general Prandtl number. With a proper choice of the parameters, our predictions of the temperature profiles are in excellent agreement with the results of our direct numerical simulations for a wide range of Prandtl numbers from 0.01 to 2547.9 and Rayleigh numbers from 10^7 to 10^9.
△ Less
Submitted 13 November, 2017; v1 submitted 28 August, 2017;
originally announced August 2017.
-
Scaling relations in large-Prandtl-number natural thermal convection
Authors:
Olga Shishkina,
Mohammad S. Emran,
Siegfried Grossmann,
Detlef Lohse
Abstract:
In this study we follow Grossmann and Lohse, Phys. Rev. Lett. 86 (2001), who derived various scalings regimes for the dependence of the Nusselt number $Nu$ and the Reynolds number $Re$ on the Rayleigh number $Ra$ and the Prandtl number $Pr$. We focus on theoretical arguments as well as on numerical simulations for the case of large-$Pr$ natural thermal convection. Based on an analysis of self-simi…
▽ More
In this study we follow Grossmann and Lohse, Phys. Rev. Lett. 86 (2001), who derived various scalings regimes for the dependence of the Nusselt number $Nu$ and the Reynolds number $Re$ on the Rayleigh number $Ra$ and the Prandtl number $Pr$. We focus on theoretical arguments as well as on numerical simulations for the case of large-$Pr$ natural thermal convection. Based on an analysis of self-similarity of the boundary layer equations, we derive that in this case the limiting large-$Pr$ boundary-layer dominated regime is I$_\infty^<$, introduced and defined in [1], with the scaling relations $Nu\sim Pr^0\,Ra^{1/3}$ and $Re\sim Pr^{-1}\,Ra^{2/3}$. Our direct numerical simulations for $Ra$ from $10^4$ to $10^9$ and $Pr$ from 0.1 to 200 show that the regime I$_\infty^<$ is almost indistinguishable from the regime III$_\infty$, where the kinetic dissipation is bulk-dominated. With increasing $Ra$, the scaling relations undergo a transition to those in IV$_u$ of reference [1], where the thermal dissipation is determined by its bulk contribution.
△ Less
Submitted 27 September, 2017; v1 submitted 22 July, 2017;
originally announced July 2017.
-
Thermal Boundary Layer Equation for Turbulent Rayleigh-Benard Convection
Authors:
Olga Shishkina,
Susanne Horn,
Sebastian Wagner,
Emily S. C. Ching
Abstract:
We report a new thermal boundary layer equation for turbulent Rayleigh-Benard convection for Prandtl number Pr>1 that takes into account the effect of turbulent fluctuations. These fluctuations are neglected in existing equations, which are based on steady-state and laminar assumptions. Using this new equation, we derive analytically the mean temperature profiles in two limits: (a) Pr>1, Pr~1 and…
▽ More
We report a new thermal boundary layer equation for turbulent Rayleigh-Benard convection for Prandtl number Pr>1 that takes into account the effect of turbulent fluctuations. These fluctuations are neglected in existing equations, which are based on steady-state and laminar assumptions. Using this new equation, we derive analytically the mean temperature profiles in two limits: (a) Pr>1, Pr~1 and (b) Pr>>1. These two theoretical predictions are in excellent agreement with the results of our direct numerical simulations for Pr=4.38 (water) and Pr=2547.9 (glycerol) respectively.
△ Less
Submitted 15 January, 2015; v1 submitted 21 November, 2014;
originally announced November 2014.
-
Toroidal and poloidal energy in rotating Rayleigh-Bénard convection
Authors:
Susanne Horn,
Olga Shishkina
Abstract:
We consider rotating Rayleigh-Bénard convection of a fluid with a Prandtl number of $Pr = 0.8$ in a cylindrical cell with an aspect ratio $Γ= 1/2$. Direct numerical simulations were performed for the Rayleigh number range $10^5 \leq Ra \leq 10^9$ and the inverse Rossby number range $0 \leq 1/Ro \leq 20$. We propose a method to capture regime transitions based on the decomposition of the velocity f…
▽ More
We consider rotating Rayleigh-Bénard convection of a fluid with a Prandtl number of $Pr = 0.8$ in a cylindrical cell with an aspect ratio $Γ= 1/2$. Direct numerical simulations were performed for the Rayleigh number range $10^5 \leq Ra \leq 10^9$ and the inverse Rossby number range $0 \leq 1/Ro \leq 20$. We propose a method to capture regime transitions based on the decomposition of the velocity field into toroidal and poloidal parts. We identify four different regimes. First, a buoyancy dominated regime occurring as long as the toroidal energy $e_{tor}$ is not affected by rotation and remains equal to that in the non-rotating case, $e^0_{tor}$. Second, a rotation influenced regime, starting at rotation rates where $e_{tor} > e^0_{tor}$ and ending at a critical inverse Rossby number $1/Ro_{cr}$ that is determined by the balance of the toroidal and poloidal energy, $e_{tor} = e_{pol}$. Third, a rotation dominated regime, where the toroidal energy $e_{tor}$ is larger than both, $e_{pol}$ and $e^0_{tor}$. Fourth, a geostrophic turbulence regime for high rotation rates where the toroidal energy drops below the value of non-rotating convection.
△ Less
Submitted 30 April, 2014;
originally announced April 2014.
-
Boundary layer structure in turbulent thermal convection and its consequences for the required numerical resolution
Authors:
Olga Shishkina,
Richard J. A. M. Stevens,
Siegfried Grossmann,
Detlef Lohse
Abstract:
Results on the Prandtl-Blasius type kinetic and thermal boundary layer thicknesses in turbulent Rayleigh-Bénard convection in a broad range of Prandtl numbers are presented. By solving the laminar Prandtl-Blasius boundary layer equations, we calculate the ratio of the thermal and kinetic boundary layer thicknesses, which depends on the Prandtl number Pr only. It is approximated as…
▽ More
Results on the Prandtl-Blasius type kinetic and thermal boundary layer thicknesses in turbulent Rayleigh-Bénard convection in a broad range of Prandtl numbers are presented. By solving the laminar Prandtl-Blasius boundary layer equations, we calculate the ratio of the thermal and kinetic boundary layer thicknesses, which depends on the Prandtl number Pr only. It is approximated as $0.588Pr^{-1/2}$ for $Pr\ll Pr^*$ and as $0.982 Pr^{-1/3}$ for $Pr^*\ll\Pr$, with $Pr^*= 0.046$. Comparison of the Prandtl--Blasius velocity boundary layer thickness with that evaluated in the direct numerical simulations by Stevens, Verzicco, and Lohse (J. Fluid Mech. 643, 495 (2010)) gives very good agreement. Based on the Prandtl--Blasius type considerations, we derive a lower-bound estimate for the minimum number of the computational mesh nodes, required to conduct accurate numerical simulations of moderately high (boundary layer dominated) turbulent Rayleigh-Bénard convection, in the thermal and kinetic boundary layers close to bottom and top plates. It is shown that the number of required nodes within each boundary layer depends on Nu and Pr and grows with the Rayleigh number Ra not slower than $\sim\Ra^{0.15}$. This estimate agrees excellently with empirical results, which were based on the convergence of the Nusselt number in numerical simulations.
△ Less
Submitted 30 September, 2011;
originally announced September 2011.
