-
Direct Opto-Electronic Imaging of 2D Semiconductor - 3D Metal Buried Interfaces
Authors:
Kiyoung Jo,
Pawan Kumar,
Joseph Orr,
Surendra B. Anantharaman,
Jinshui Miao,
Michael Motala,
Arkamita Bandyopadhyay,
Kim Kisslinger,
Christopher Muratore,
Vivek B. Shenoy,
Eric Stach,
Nicholas Glavin,
Deep Jariwala
Abstract:
The semiconductor-metal junction is one of the most critical factors for high performance electronic devices. In two-dimensional (2D) semiconductor devices, minimizing the voltage drop at this junction is particularly challenging and important. Despite numerous studies concerning contact resistance in 2D semiconductors, the exact nature of the buried interface under a three-dimensional (3D) metal…
▽ More
The semiconductor-metal junction is one of the most critical factors for high performance electronic devices. In two-dimensional (2D) semiconductor devices, minimizing the voltage drop at this junction is particularly challenging and important. Despite numerous studies concerning contact resistance in 2D semiconductors, the exact nature of the buried interface under a three-dimensional (3D) metal remains unclear. Herein, we report the direct measurement of electrical and optical responses of 2D semiconductor-metal buried interfaces using a recently developed metal-assisted transfer technique to expose the buried interface which is then directly investigated using scanning probe techniques. We characterize the spatially varying electronic and optical properties of this buried interface with < 20 nm resolution. To be specific, potential, conductance and photoluminescence at the buried metal/MoS$_2$ interface are correlated as a function of a variety of metal deposition conditions as well as the type of metal contacts. We observe that direct evaporation of Au on MoS$_2$ induces a large strain of ~5% in the MoS$_2$ which, coupled with charge transfer, leads to degenerate doping of the MoS$_2$ underneath the contact. These factors lead to improvement of contact resistance to record values of 138 kohm-um, as measured using local conductance probes. This approach was adopted to characterize MoS$_2$-In/Au alloy interfaces, demonstrating contact resistance as low as 63 kohm-um. Our results highlight that the MoS$_2$/Metal interface is sensitive to device fabrication methods, and provides a universal strategy to characterize buried contact interfaces involving 2D semiconductors.
△ Less
Submitted 28 January, 2021;
originally announced January 2021.
-
High-throughput search for magnetic and topological order in transition metal oxides
Authors:
Nathan C. Frey,
Matthew K. Horton,
Jason M. Munro,
Sinéad M. Griffin,
Kristin A. Persson,
Vivek B. Shenoy
Abstract:
The discovery of intrinsic magnetic topological order in $\rm MnBi_2Te_4$ has invigorated the search for materials with coexisting magnetic and topological phases. These multi-order quantum materials are expected to exhibit new topological phases that can be tuned with magnetic fields, but the search for such materials is stymied by difficulties in predicting magnetic structure and stability. Here…
▽ More
The discovery of intrinsic magnetic topological order in $\rm MnBi_2Te_4$ has invigorated the search for materials with coexisting magnetic and topological phases. These multi-order quantum materials are expected to exhibit new topological phases that can be tuned with magnetic fields, but the search for such materials is stymied by difficulties in predicting magnetic structure and stability. Here, we compute over 27,000 unique magnetic orderings for over 3,000 transition metal oxides in the Materials Project database to determine their magnetic ground states and estimate their effective exchange parameters and critical temperatures. We perform a high-throughput band topology analysis of centrosymmetric magnetic materials, calculate topological invariants, and identify 18 new candidate ferromagnetic topological semimetals, axion insulators, and antiferromagnetic topological insulators. To accelerate future efforts, machine learning classifiers are trained to predict both magnetic ground states and magnetic topological order without requiring first-principles calculations.
△ Less
Submitted 1 June, 2020;
originally announced June 2020.
-
Direct Visualisation of Out-of-Equilibrium Structural Transformations in Atomically-Thin Chalcogenides
Authors:
Pawan Kumar,
James P. Horwath,
Alexandre C. Foucher,
Christopher C. Price,
Natalia Acero,
Vivek B. Shenoy,
Eric A. Stach,
Deep Jariwala
Abstract:
Two-dimensional (2D) transition metal dichalcogenides (TMDCs) have been the subject of sustained research interest due to their extraordinary electronic and optical properties. They also exhibit a wide range of structural phases because of the different orientations that the atoms can have within a single layer, or due to the ways that different layers can stack. Here we report the first study of…
▽ More
Two-dimensional (2D) transition metal dichalcogenides (TMDCs) have been the subject of sustained research interest due to their extraordinary electronic and optical properties. They also exhibit a wide range of structural phases because of the different orientations that the atoms can have within a single layer, or due to the ways that different layers can stack. Here we report the first study of direct-visualization of structural transformations in atomically-thin layers under highly non-equilibrium thermodynamic conditions. We probe these transformations at the atomic scale using real-time, aberration corrected scanning transmission electron microscopy and observe strong dependence of the resulting structures and phases on both heating rate and temperature. A fast heating rate (25 C/sec) yields highly ordered crystalline hexagonal islands of sizes of less than 20 nm which are composed of a mixture of 2H and 3R phases. However, a slow heating rate (25 C/min) yields nanocrystalline and sub-stoichiometric amorphous regions. These differences are explained by different rates of sulfur evaporation and redeposition. The use of non-equilibrium heating rates to achieve highly crystalline and quantum-confined features from 2D atomic layers present a new route to synthesize atomically-thin, laterally confined nanostrucutres and opens new avenues for investigating fundamental electronic phenomena in confined dimensions.
△ Less
Submitted 20 February, 2020;
originally announced February 2020.
-
Modeling the vertical growth of van der Waals stacked 2D materials using the diffuse domain method
Authors:
Zhenlin Guo,
Christopher Price,
Vivek B. Shenoy,
John Lowengrub
Abstract:
Vertically-stacked monolayers of graphene and other atomically-thin 2D materials have attracted considerable research interest because of their potential in fabricating materials with specifically-designed properties. Chemical vapor deposition has proved to be an efficient and scalable fabrication method. However, a lack of mechanistic understanding has hampered efforts to control the fabrication…
▽ More
Vertically-stacked monolayers of graphene and other atomically-thin 2D materials have attracted considerable research interest because of their potential in fabricating materials with specifically-designed properties. Chemical vapor deposition has proved to be an efficient and scalable fabrication method. However, a lack of mechanistic understanding has hampered efforts to control the fabrication process beyond empirical trial-and-error approaches. In this paper, we develop a general multiscale Burton-Cabrera-Frank (BCF) type model of the vertical growth of 2D materials to predict the necessary growth conditions for vertical versus in-plane (monolayer) growth of arbitrarily-shaped layers. This extends previous work where we developed such a model assuming the layers were fully-faceted (Ye et al., ACS Nano, 11, 12780-12788, 2017). To solve the model numerically, we reformulate the system using the phase-field/diffuse domain method that enables the equations to be solved in a fixed regular domain. We use a second-order accurate, adaptive finite-difference/nonlinear multigrid algorithm to discretize and solve the discrete system. We investigate the effect of parameters, including the van der Waals interaction energies between the layers, the kinetic attachment rates, the edge-energies and the deposition flux, on layer growth and morphologies. While the conditions that favor vertical growth generally follow an analytic thermodynamic criterion we derived for circular layers, the layer boundaries may develop significant curvature during growth, consistent with experimental observations. Our approach provides a mechanistic framework for controlling and optimizing the growth multilayered 2D materials.
△ Less
Submitted 22 November, 2019;
originally announced November 2019.
-
Long Range Force Transmission in Fibrous Matrices Enabled by Tension-Driven Alignment of Fibers
Authors:
Hailong Wang,
Abhilash Nair,
Christopher S. Chen,
Rebecca G. Wells,
Vivek B. Shenoy
Abstract:
Cells can sense and respond to mechanical signals over relatively long distances across fibrous extracellular matrices. Here, we explore all of the key factors that influence long range force transmission in cell-populated collagen matrices: alignment of collagen fibers, responses to applied force, strain stiffening properties of the aligned fibers, aspect ratios of the cells, and the polarization…
▽ More
Cells can sense and respond to mechanical signals over relatively long distances across fibrous extracellular matrices. Here, we explore all of the key factors that influence long range force transmission in cell-populated collagen matrices: alignment of collagen fibers, responses to applied force, strain stiffening properties of the aligned fibers, aspect ratios of the cells, and the polarization of cellular contraction. A constitutive law accounting for mechanically-driven collagen fiber reorientation is proposed. We systematically investigate the range of collagen fiber alignment using both finite element simulations and analytical calculations. Our results show that tension-driven collagen fiber alignment plays a crucial role in force transmission. Small critical stretch for fiber alignment, large fiber stiffness and fiber strain hardening behavior enable long-range interaction. Furthermore, the range of collagen fiber alignment for elliptical cells with polarized contraction is much larger than that for spherical cells with diagonal contraction. A phase diagram showing the range of force transmission as a function of cell shape and polarization and matrix properties is presented. Our results are in good agreement with recent experiments, and highlight the factors that influence long-range force transmission, in particular tension-driven alignment of fibers. Our work has important relevance to biological processes including development, cancer metastasis and wound healing, suggesting conditions whereby cells communicate over long distances.
△ Less
Submitted 22 September, 2014;
originally announced September 2014.
-
Remodeling of Fibrous Extracellular Matrices by Contractile Cells: Predictions from Discrete Fiber Network Simulations
Authors:
Abhilash Nair,
Brendon M. Baker,
Britta Trappmann,
Christopher S. Chen,
Vivek B. Shenoy
Abstract:
Contractile forces exerted on the surrounding extracellular matrix (ECM) lead to the alignment and stretching of constituent fibers within the vicinity of cells. As a consequence, the matrix reorganizes to form thick bundles of aligned fibers that enable force transmission over distances larger than the size of the cells. Contractile force-mediated remodeling of ECM fibers has bearing on a number…
▽ More
Contractile forces exerted on the surrounding extracellular matrix (ECM) lead to the alignment and stretching of constituent fibers within the vicinity of cells. As a consequence, the matrix reorganizes to form thick bundles of aligned fibers that enable force transmission over distances larger than the size of the cells. Contractile force-mediated remodeling of ECM fibers has bearing on a number of physiologic and pathophysiologic phenomena. In this work, we present a computational model to capture cell-mediated remodeling within fibrous matrices using finite element based discrete fiber network simulations. The model is shown to accurately capture collagen alignment, heterogeneous deformations, and long-range force transmission observed experimentally. The zone of mechanical influence surrounding a single contractile cell and the interaction between two cells are predicted from the strain-induced alignment of fibers. Through parametric studies, the effect of cell contractility and cell shape anisotropy on matrix remodeling and force transmission are quantified and summarized in a phase diagram. For highly contractile and elongated cells, we find a sensing distance that is ten times the cell size, in agreement with experimental observations.
△ Less
Submitted 22 September, 2014;
originally announced September 2014.
-
Defective graphene as promising anode material for Na-ion battery and Ca-ion battery
Authors:
Dibakar Datta,
Junwen Li,
Vivek B. Shenoy
Abstract:
We have investigated adsorption of Na and Ca on graphene with divacancy (DV) and Stone-Wales (SW) defect. Our results show that adsorption is not possible on pristine graphene. However, their adsorption on defective sheet is energetically favorable. The enhanced adsorption can be attributed to the increased charge transfer between adatoms and underlying defective sheet. With the increase in defect…
▽ More
We have investigated adsorption of Na and Ca on graphene with divacancy (DV) and Stone-Wales (SW) defect. Our results show that adsorption is not possible on pristine graphene. However, their adsorption on defective sheet is energetically favorable. The enhanced adsorption can be attributed to the increased charge transfer between adatoms and underlying defective sheet. With the increase in defect density until certain possible limit, maximum percentage of adsorption also increases giving higher battery capacity. For maximum possible DV defect, we can achieve maximum capacity of 1459 mAh/g for Na-ion batteries (NIBs) and 2900 mAh/g for Ca-ion batteries (CIBs). For graphene full of SW defect, we find the maximum capacity of NIBs and CIBs is around 1071 mAh/g and 2142 mAh/g respectively. Our results will help create better anode materials with much higher capacity and better cycling performance for NIBs and CIBs.
△ Less
Submitted 17 September, 2013;
originally announced September 2013.
-
Strain Stiffening Induced by Molecular Motors in Active Crosslinked Biopolymer Networks
Authors:
Peng Chen,
Vivek B. Shenoy
Abstract:
We have studied the elastic response of actin networks with both compliant and rigid crosslinks by modeling molecular motors as force dipoles. Our finite element simulations show that for compliant crosslinkers such as filamin A, the network can be stiffened by two orders of magnitude while stiffening achieved with incompliant linkers such as scruin is significantly smaller, typically a factor of…
▽ More
We have studied the elastic response of actin networks with both compliant and rigid crosslinks by modeling molecular motors as force dipoles. Our finite element simulations show that for compliant crosslinkers such as filamin A, the network can be stiffened by two orders of magnitude while stiffening achieved with incompliant linkers such as scruin is significantly smaller, typically a factor of two, in excellent agreement with recent experiments. We show that the differences arise from the fact that the motors are able to stretch the compliant crosslinks to the fullest possible extent, which in turn causes to the deformation of the filaments. With increasing applied strain, the filaments further deform leading to a stiffened elastic response. When the crosslinks are incompliant, the contractile forces due to motors do not alter the network morphology in a significant manner and hence only small stiffening is observed.
△ Less
Submitted 2 September, 2010;
originally announced September 2010.
-
Low-Reynolds number swimming in gels
Authors:
Henry C. Fu,
Vivek B. Shenoy,
Thomas R. Powers
Abstract:
Many microorganisms swim through gels, materials with nonzero zero-frequency elastic shear modulus, such as mucus. Biological gels are typically heterogeneous, containing both a structural scaffold (network) and a fluid solvent. We analyze the swimming of an infinite sheet undergoing transverse traveling wave deformations in the "two-fluid" model of a gel, which treats the network and solvent as t…
▽ More
Many microorganisms swim through gels, materials with nonzero zero-frequency elastic shear modulus, such as mucus. Biological gels are typically heterogeneous, containing both a structural scaffold (network) and a fluid solvent. We analyze the swimming of an infinite sheet undergoing transverse traveling wave deformations in the "two-fluid" model of a gel, which treats the network and solvent as two coupled elastic and viscous continuum phases. We show that geometric nonlinearities must be incorporated to obtain physically meaningful results. We identify a transition between regimes where the network deforms to follow solvent flows and where the network is stationary. Swimming speeds can be enhanced relative to Newtonian fluids when the network is stationary. Compressibility effects can also enhance swimming velocities. Finally, microscopic details of sheet-network interactions influence the boundary conditions between the sheet and network. The nature of these boundary conditions significantly impacts swimming speeds.
△ Less
Submitted 8 April, 2010;
originally announced April 2010.
