-
Atomically smooth films of CsSb: a chemically robust visible light photocathode
Authors:
C. T. Parzyck,
C. A. Pennington,
W. J. I. DeBenedetti,
J. Balajka,
E. Echeverria,
H. Paik,
L. Moreschini,
B. D. Faeth,
C. Hu,
J. K. Nangoi,
V. Anil,
T. A. Arias,
M. A. Hines,
D. G. Schlom,
A. Galdi,
K. M. Shen,
J. M. Maxson
Abstract:
Alkali antimonide semiconductor photocathodes provide a promising platform for the generation of high brightness electron beams, which are necessary for the development of cutting-edge probes including x-ray free electron lasers and ultrafast electron diffraction. However, to harness the intrinsic brightness limits in these compounds, extrinsic degrading factors, including surface roughness and co…
▽ More
Alkali antimonide semiconductor photocathodes provide a promising platform for the generation of high brightness electron beams, which are necessary for the development of cutting-edge probes including x-ray free electron lasers and ultrafast electron diffraction. However, to harness the intrinsic brightness limits in these compounds, extrinsic degrading factors, including surface roughness and contamination, must be overcome. By exploring the growth of CsxSb thin films monitored by in situ electron diffraction, the conditions to reproducibly synthesize atomically smooth films of CsSb on 3C-SiC (100) and graphene coated TiO2 (110) substrates are identified, and detailed structural, morphological, and electronic characterization is presented. These films combine high quantum efficiency in the visible (up to 1.2% at 400 nm), an easily accessible photoemission threshold of 550 nm, low surface roughness (down to 600 pm on a 1 um scale), and a robustness against oxidation up to 15 times greater then Cs3Sb. These properties suggest that CsSb has the potential to operate as an alternative to Cs$_3$Sb in electron source applications where the demands of the vacuum environment might otherwise preclude the use of traditional alkali antimonides.
△ Less
Submitted 31 May, 2023;
originally announced May 2023.
-
An Algorithm for Subtraction of Doublet Emission Lines in Angle-Resolved Photoemission Spectroscopy
Authors:
Yaoju Tarn,
Mekhola Sinha,
Christopher Pasco,
Darrell G. Schlom,
Tyrel M. McQueen,
Kyle M. Shen,
Brendan D. Faeth
Abstract:
Plasma discharge lamps are widely utilized in the practice of angle-resolved photoemission spectroscopy (ARPES) experiments as narrow-linewidth ultraviolet photon sources. However, many emission lines such as Ar-I, Ne-I, and Ne-II have closely spaced doublet emission lines, which result in superimposed replica on the measured ARPES spectra. Here, we present a simple method for subtracting the cont…
▽ More
Plasma discharge lamps are widely utilized in the practice of angle-resolved photoemission spectroscopy (ARPES) experiments as narrow-linewidth ultraviolet photon sources. However, many emission lines such as Ar-I, Ne-I, and Ne-II have closely spaced doublet emission lines, which result in superimposed replica on the measured ARPES spectra. Here, we present a simple method for subtracting the contribution of these doublet emission lines from photoemission spectra. Benchmarking against ARPES spectra of well-characterized 2D materials, we demonstrate that this algorithm manages to subtract the doublet signal and reproduce the key features of the monochromated He-I$α$ spectra in a physically sound manner that reliably reproduces quantifiable dispersion relations and quasiparticle lifetimes.
△ Less
Submitted 13 March, 2023;
originally announced March 2023.
-
A single-crystal alkali antimonide photocathode: high efficiency in the ultra-thin limit
Authors:
C. T. Parzyck,
A. Galdi,
J. K. Nangoi,
W. J. I. DeBenedetti,
J. Balajka,
B. D. Faeth,
H. Paik,
C. Hu,
T. A. Arias,
M. A. Hines,
D. G. Schlom,
K. M. Shen,
J. M. Maxson
Abstract:
The properties of photoemission electron sources determine the ultimate performance of a wide class of electron accelerators and photon detectors. To date, all high-efficiency visible-light photocathode materials are either polycrystalline or exhibit intrinsic surface disorder, both of which limit emitted electron beam brightness. In this letter we demonstrate the synthesis of epitaxial thin films…
▽ More
The properties of photoemission electron sources determine the ultimate performance of a wide class of electron accelerators and photon detectors. To date, all high-efficiency visible-light photocathode materials are either polycrystalline or exhibit intrinsic surface disorder, both of which limit emitted electron beam brightness. In this letter we demonstrate the synthesis of epitaxial thin films of Cs$_3$Sb on 3C-SiC (001) using molecular-beam epitaxy. Films as thin as 4 nm have quantum efficiencies exceeding 2\% at 532 nm. We also find that epitaxial films have an order of magnitude larger quantum efficiency at 650 nm than comparable polycrystalline films on Si. Additionally, these films permit angle-resolved photoemission spectroscopy measurements of the electronic structure, which are found to be in good agreement with theory. Epitaxial films open the door to dramatic brightness enhancements via increased efficiency near threshold, reduced surface disorder, and the possibility of engineering new photoemission functionality at the level of single atomic layers.
△ Less
Submitted 28 December, 2021;
originally announced December 2021.
-
A tunable low-energy photon source for high-resolution angle-resolved photoemission spectroscopy
Authors:
John W. Harter,
Philip D. C. King,
Eric J. Monkman,
Daniel E. Shai,
Yuefeng Nie,
Masaki Uchida,
Bulat Burganov,
Shouvik Chatterjee,
Kyle M. Shen
Abstract:
We describe a tunable low-energy photon source consisting of a laser-driven xenon plasma lamp coupled to a Czerny-Turner monochromator. The combined tunability, brightness, and narrow spectral bandwidth make this light source useful in laboratory-based high-resolution photoemission spectroscopy experiments. The source supplies photons with energies up to ~7 eV, delivering under typical conditions…
▽ More
We describe a tunable low-energy photon source consisting of a laser-driven xenon plasma lamp coupled to a Czerny-Turner monochromator. The combined tunability, brightness, and narrow spectral bandwidth make this light source useful in laboratory-based high-resolution photoemission spectroscopy experiments. The source supplies photons with energies up to ~7 eV, delivering under typical conditions >10^12 ph/s within a 10 meV spectral bandwidth, which is comparable to helium plasma lamps and many synchrotron beamlines. We first describe the lamp and monochromator system and then characterize its output, with attention to those parameters which are of interest for photoemission experiments. Finally, we present angle-resolved photoemission spectroscopy data using the light source and compare its performance to a conventional helium plasma lamp.
△ Less
Submitted 11 April, 2017;
originally announced April 2017.
-
An in-vacuum diffractometer for resonant elastic soft x-ray scattering
Authors:
D. G. Hawthorn,
F. He,
L. Venema,
H. Davis,
A. J. Achkar,
J. Zhang,
R. Sutarto,
H. Wadati,
A. Radi,
T. Wilson,
G. Wright,
K. M. Shen,
J. Geck,
H. Zhang,
V. Novak,
G. A. Sawatzky
Abstract:
We describe the design, construction and performance of a 4-circle in-vacuum diffractometer for resonant elastic soft x-ray scattering and reflectivity. The diffractometer, installed on the REIXS beamline at the Canadian Light Source, includes 9 in-vacuum motions driven by in-vacuum stepper motors and operates in ultra-high vacuum at base pressure of 2 x10^-10 Torr. Cooling to a base temperature o…
▽ More
We describe the design, construction and performance of a 4-circle in-vacuum diffractometer for resonant elastic soft x-ray scattering and reflectivity. The diffractometer, installed on the REIXS beamline at the Canadian Light Source, includes 9 in-vacuum motions driven by in-vacuum stepper motors and operates in ultra-high vacuum at base pressure of 2 x10^-10 Torr. Cooling to a base temperature of 18 K is provided with a closed-cycle cryostat. The diffractometer includes a choice of 3 photon detectors: a photodiode, a channeltron and a 2D sensitive channelplate detector. Along with variable slit and filter options, these detectors are suitable for studying a wide range of phenomena having both weak and strong diffraction signals. Example measurements of diffraction and reflectivity in Nd-doped (La,Sr)_2CuO_4 and thin film (Ga,Mn)As are shown.
△ Less
Submitted 19 May, 2011;
originally announced May 2011.
