-
Evaporation-driven coalescence of two droplets undergoing freezing
Authors:
Sivanandan Kavuri,
George Karapetsas,
Chander Shekhar Sharma,
Kirti Chandra Sahu
Abstract:
We examine the evaporation-induced coalescence of two droplets undergoing freezing by conducting numerical simulations employing the lubrication approximation. When two sessile drops undergo freezing in close vicinity over a substrate, they interact with each other through the gaseous phase and the simultaneous presence of evaporation/condensation. In an unsaturated environment, the evaporation fl…
▽ More
We examine the evaporation-induced coalescence of two droplets undergoing freezing by conducting numerical simulations employing the lubrication approximation. When two sessile drops undergo freezing in close vicinity over a substrate, they interact with each other through the gaseous phase and the simultaneous presence of evaporation/condensation. In an unsaturated environment, the evaporation flux over the two volatile sessile drops is asymmetric, with lower evaporation in the region between the two drops. This asymmetry in the evaporation flux generates an asymmetric curvature in each drop, which results in a capillary flow that drives the drops closer to each other, eventually leading to their coalescence. This capillary flow, driven by evaporation, competes with the upward movement of the freezing front, depending on the relative humidity in the surrounding environment. We found that higher relative humidity reduces the evaporative flux, delaying capillary flow and impeding coalescence by restricting contact line motion. For a constant relative humidity, the substrate temperature governs the coalescence phenomenon, and resulting condensation can accelerate this process. Interestingly, lower substrate temperatures are observed to facilitate faster propagation of the freezing front, which, in turn, restricts coalescence.
△ Less
Submitted 18 November, 2024; v1 submitted 19 August, 2024;
originally announced August 2024.
-
Exploiting the geometry of heterogeneous networks: A case study of the Indian stock market
Authors:
Pawanesh Pawanesh,
Charu Sharma,
Niteesh Sahni
Abstract:
In this study, we model the Indian stock market as heterogenous scale free network, which is then embedded in a two dimensional hyperbolic space through a machine learning based technique called as coalescent embedding. This allows us to apply the hyperbolic kmeans algorithm on the Poincare disc and the clusters so obtained resemble the original network communities more closely than the clusters o…
▽ More
In this study, we model the Indian stock market as heterogenous scale free network, which is then embedded in a two dimensional hyperbolic space through a machine learning based technique called as coalescent embedding. This allows us to apply the hyperbolic kmeans algorithm on the Poincare disc and the clusters so obtained resemble the original network communities more closely than the clusters obtained via Euclidean kmeans on the basis of well-known measures normalised mutual information and adjusted mutual information. Through this, we are able to clearly distinguish between periods of market stability and volatility by applying non-parametric statistical tests with a significance level of 0.05 to geometric measures namely hyperbolic distance and hyperbolic shortest path distance. After that, we are able to spot significant market change early by leveraging the Bollinger Band analysis on the time series of modularity in the embedded networks of each window. Finally, the radial distance and the Equidistance Angular coordinates help in visualizing the embedded network in the Poincare disc and it is seen that specific market sectors cluster together.
△ Less
Submitted 9 January, 2025; v1 submitted 6 April, 2024;
originally announced April 2024.
-
Freezing of sessile droplet and frost halo formation
Authors:
Sivanandan Kavuri,
George Karapetsas,
Chander Shekhar Sharma,
Kirti Chandra Sahu
Abstract:
The freezing of a sessile droplet unveils fascinating physics, characterised by the emergence of a frost halo on the underlying substrate, the progression of the liquid-ice interface, and the formation of a cusp-like morphology at the tip of the droplet. We investigate the freezing of a volatile sessile droplet, focusing on the frost halo formation, which has not been theoretically explored. The f…
▽ More
The freezing of a sessile droplet unveils fascinating physics, characterised by the emergence of a frost halo on the underlying substrate, the progression of the liquid-ice interface, and the formation of a cusp-like morphology at the tip of the droplet. We investigate the freezing of a volatile sessile droplet, focusing on the frost halo formation, which has not been theoretically explored. The formation of the frost halo is associated with the inherent evaporation process in the early freezing stages. We observe a negative evaporation flux enveloping the droplet in the initial stages, which indicates that vapour produced during freezing condenses on the substrate close to the contact line, forming a frost halo. The condensate accumulation triggers re-evaporation, resulting in a temporal shift of the frost halo region away from the contact line. Eventually, it disappears due to the diffusive nature of the water vapour far away from the droplet. We found that increasing the relative humidity increases the lifetime of the frost halo due to a substantial reduction in evaporation that prolonged the presence of net condensate on the substrate. Increasing liquid volatility increases the evaporation flux, and condensation occurs closer to the droplet, as a higher amount of vapour is in the periphery of the droplet. We also found that decreasing the thermal conductivity of the substrate increases the total freezing time. The slower freezing process is accompanied by increased vaporized liquid, resulting in condensation with its concentration reaching supersaturation.
△ Less
Submitted 5 December, 2023;
originally announced December 2023.
-
Condensate droplet roaming on nanostructured superhydrophobic surfaces
Authors:
Cheuk Wing Edmond Lam,
Kartik Regulagadda,
Matteo Donati,
Abinash Tripathy,
Gopal Chandra Pal,
Chander Shekhar Sharma,
Athanasios Milionis,
Dimos Poulikakos
Abstract:
Jumping of coalescing condensate droplets from superhydrophobic surfaces is an interesting phenomenon which yields marked heat transfer enhancement over the more explored gravity-driven droplet removal mode in surface condensation, a phase change process of central interest to applications ranging from energy to water harvesting. However, when condensate microdroplets coalesce, they can also spont…
▽ More
Jumping of coalescing condensate droplets from superhydrophobic surfaces is an interesting phenomenon which yields marked heat transfer enhancement over the more explored gravity-driven droplet removal mode in surface condensation, a phase change process of central interest to applications ranging from energy to water harvesting. However, when condensate microdroplets coalesce, they can also spontaneously propel themselves omnidirectionally on the surface independent of gravity and grow by feeding from droplets they sweep along the way. Here we observe and explain the physics behind this phenomenon of roaming of coalescing condensate microdroplets on solely nanostructured superhydrophobic surfaces, where the microdroplets are orders of magnitude larger than the underlaying surface nanotexture. We quantify and show that it is the inherent asymmetries in droplet adhesion during condensation, arising from the stochastic nature of nucleation within the nanostructures, that generates the tangential momentum driving the roaming motion. Subsequent dewetting during this conversion initiates a vivid roaming and successive coalescence process, preventing condensate flooding of the surface, and enhancing surface renewal. Finally, we show that the more efficient conversion process of roaming from excess surface energy to kinetic energy results in significantly improved heat transfer efficiency over condensate droplet jumping, the mechanism currently understood as maximum.
△ Less
Submitted 17 October, 2023;
originally announced October 2023.
-
Controlled coalescence-induced droplet jumping on flexible superhydrophobic substrates
Authors:
Gopal Chandra Pal,
Siddharth SS,
Manish Agarwal,
Chander Shekhar Sharma
Abstract:
Sessile droplets coalescing on superhydrophobic substrates spontaneously jump from the surface. In this process, the excess surface energy available at the initiation of coalescence overcomes the minimal surface adhesion and manifests as sufficient kinetic energy to propel the droplets away from the substrate. Here, we show that the coalescence induced droplet jumping velocity is significantly cur…
▽ More
Sessile droplets coalescing on superhydrophobic substrates spontaneously jump from the surface. In this process, the excess surface energy available at the initiation of coalescence overcomes the minimal surface adhesion and manifests as sufficient kinetic energy to propel the droplets away from the substrate. Here, we show that the coalescence induced droplet jumping velocity is significantly curtailed if the superhydrophobic substrate is flexible in nature. Through detailed experimental measurements and numerical simulations, we demonstrate that the droplet jumping velocity and jumping height can be reduced by as much as 40 % and 64%, respectively, by synergistically tuning the substrate stiffness and substrate frequency. We show that this hitherto unexplored aspect of droplet coalescence jumping can be gainfully exploited in water harvesting from dew and fog harvesting. Additionally, through an exemplar butterfly wing substrate, we demonstrate that this effect is likely to manifest on many natural superhydrophobic substrates due to their inherent flexibility.
△ Less
Submitted 11 April, 2023;
originally announced April 2023.
-
Biomimetic Micropillar Wick for Enhanced Thin-Film Evaporation
Authors:
Anand S,
Chander Shekhar Sharma
Abstract:
Sustainable liquid cooling solutions are recognized as the future of thermal management in the chip industry. Among them, the phase change heat transfer devices such as heat pipes and vapour chambers have shown tremendous potential. These devices rely on the physics of capillary-driven thin-film evaporation which is inherently coupled with the design and optimization of the evaporator wicks used i…
▽ More
Sustainable liquid cooling solutions are recognized as the future of thermal management in the chip industry. Among them, the phase change heat transfer devices such as heat pipes and vapour chambers have shown tremendous potential. These devices rely on the physics of capillary-driven thin-film evaporation which is inherently coupled with the design and optimization of the evaporator wicks used in these devices. Here, we introduce a biomimetic evaporator wick design inspired by the peristome of the Nepenthes alata that can achieve significantly enhanced evaporative cooling. It consists of array of micropillars with multiple wedges along the sidewall of each micropillar. The efficacy of the wedged micropillar is evaluated based on a validated numerical model on the metrics of dryout heat flux and effective heat transfer coefficient. The wedge angle is chosen such that wedged micropillars cause liquid filaments to rise along the micropillar vertical walls. This results in a significant increase in thin-film area for evaporation. Additionally, the large mean curvature of the liquid meniscus produces strong capillary pumping pressure and simultaneously, the wedges increase the overall permeability of the wick. Consequently, our model predicts that the wedged micropillar wick can attain ~234% enhancement of dryout heat flux compared to a conventional cylindrical micropillar wick of similar geometrical dimensions. Moreover, the wedged micropillars can also attain higher effective heat transfer coefficient under dryout conditions thus outperforming the cylindrical micropillar in terms of heat transfer efficiency. Our study provide insight into the design and capability of the biomimetic wedged micropillars as an efficient evaporator wick for various thin-film evaporation applications.
△ Less
Submitted 9 February, 2023;
originally announced February 2023.
-
Out-of-Plane Biphilic Surface Structuring for Enhanced Capillary-Driven Dropwise Condensation
Authors:
Luca Stendardo,
Athanasios Milionis,
George Kokkoris,
Christos Stamatopoulos,
Chander Shekhar Sharma,
Raushan Kumar,
Matteo Donati,
Dimos Poulikakos
Abstract:
Rapid and sustained condensate droplet departure from a surface is key towards achieving high heat transfer rates in condensation, a physical process critical to a broad range of industrial and societal applications. Despite progress in enhancing condensation heat transfer through inducing its dropwise mode with hydrophobic materials, sophisticated surface engineering methods that can lead to furt…
▽ More
Rapid and sustained condensate droplet departure from a surface is key towards achieving high heat transfer rates in condensation, a physical process critical to a broad range of industrial and societal applications. Despite progress in enhancing condensation heat transfer through inducing its dropwise mode with hydrophobic materials, sophisticated surface engineering methods that can lead to further enhancement of heat transfer are still highly desirable. Here, by employing a three-dimensional, multiphase computational approach, we present an effective out-of-plane biphilic surface topography, that reveals an unexplored capillarity-driven departure mechanism of condensate droplets. This texture consists of biphilic diverging micro-cavities wherein a matrix of small hydrophilic spots is placed at their bottom, that is, amongst the pyramid-shaped, superhydrophobic micro-textures forming the cavities. We show that an optimal combination of the hydrophilic spots and the angles of the pyramidal structures can achieve high deformational stretching of the droplets, eventually realizing an impressive slingshot-like droplet ejection process from the texture. Such a droplet departure mechanism has the potential to reduce the droplet ejection volume and thus enhance the overall condensation efficiency, compared to coalescence-initiated droplet jumping from other state-of-the-art surfaces. Simulations have shown that optimal pyramid-shaped biphilic micro-structures can provoke droplet self-ejection at low volumes, up to 56% lower compared to superhydrophobic straight pillars, revealing a promising new surface micro-texture design strategy towards enhancing condensation heat transfer efficiency and water harvesting capabilities.
△ Less
Submitted 5 November, 2022;
originally announced November 2022.
-
Enhancing condensation on soft substrates through bulk lubricant infusion
Authors:
Chander Shekhar Sharma,
Athanasios Milionis,
Abhinav Naga,
Cheuk Wing Edmond Lam,
Gabriel Rodriguez,
Marco Francesco Del Ponte,
Valentina Negri,
Hopf Raoul,
Maria D'Acunzi,
Hans-Jürgen Butt,
Doris Vollmer,
Dimos Poulikakos
Abstract:
Soft substrates such as polydimethylsiloxane (PDMS) enhance droplet nucleation during the condensation of water vapour, because their deformability inherently reduces the energetic threshold for heterogeneous nucleation relative to rigid substrates. However, this enhanced droplet nucleation is counteracted later in the condensation cycle, when the viscoelastic dissipation inhibits condensate dropl…
▽ More
Soft substrates such as polydimethylsiloxane (PDMS) enhance droplet nucleation during the condensation of water vapour, because their deformability inherently reduces the energetic threshold for heterogeneous nucleation relative to rigid substrates. However, this enhanced droplet nucleation is counteracted later in the condensation cycle, when the viscoelastic dissipation inhibits condensate droplet shedding from the substrate. Here, we show that bulk lubricant infusion in the soft substrate is a potential pathway for overcoming this limitation. We demonstrate that even 5% bulk lubricant infusion in PDMS reduces viscoelastic dissipation in the substrate by more than 30 times and more than doubles the droplet nucleation density. We correlate the droplet nucleation and growth rate with the material properties controlled by design, i.e. the fraction and composition of uncrosslinked chains, shear modulus, and viscoelastic dissipation. Through in-situ, microscale condensation on the substrates, we show that the increase in nucleation density and reduction in pre-coalescence droplet growth rate is insensitive to the percentage of lubricant in PDMS. Our results indicate the presence of a lubricant layer on the substrate surface that cloaks the growing condensate droplets. We visualize the cloaking effect and show that lubricant infusion in PDMS significantly increases the rate of cloaking compared to PDMS without any lubricant infusion. Finally, we show that the overall enhanced condensation due to bulk lubricant infusion in PDMS leads to more than 40% increase in dewing on the substrate.
△ Less
Submitted 26 August, 2021;
originally announced August 2021.
-
Ultra-Thin Lubricant-Infused Vertical Graphene Nanoscaffolds for High-Performance Dropwise Condensation
Authors:
Abinash Tripathy,
Cheuk Wing Edmond Lam,
Diana Davila,
Matteo Donati,
Athanasios Milionis,
Chander Shekhar Sharma,
Dimos Poulikakos
Abstract:
Lubricant-infused surfaces (LIS) are highly efficient in repelling water and constitute a very promising family of materials for condensation processes occurring in a broad range of energy applications. However, the performance of LIS in such processes is limited by the inherent thermal resistance imposed by the thickness of the lubricant and supporting surface structure, as well as by the gradual…
▽ More
Lubricant-infused surfaces (LIS) are highly efficient in repelling water and constitute a very promising family of materials for condensation processes occurring in a broad range of energy applications. However, the performance of LIS in such processes is limited by the inherent thermal resistance imposed by the thickness of the lubricant and supporting surface structure, as well as by the gradual depletion of the lubricant over time. Here we present a remarkable, ultra-thin (~70 nm) and conductive LIS architecture, obtained by infusing lubricant into a vertically grown graphene nanoscaffold on copper. The ultra-thin nature of the scaffold, combined with the high in-plane thermal conductivity of graphene, drastically minimize earlier limitations, effectively doubling the heat transfer performance compared to a state-of-the-art CuO LIS surface. We show that the effect of the thermal resistance to the heat transfer performance of a LIS surface, although often overlooked, can be so detrimental that a simple nanostructured CuO surface can outperform a CuO LIS surface, despite film condensation on the former. The present vertical graphene LIS is also found to be resistant to lubricant depletion, maintaining stable dropwise condensation for at least ~7 hours with no significant change of advancing contact angle and contact angle hysteresis. The lubricant consumed by the vertical graphene LIS is 52.6% less than the existing state-of-the-art CuO LIS, making also the fabrication process more economical.
△ Less
Submitted 7 April, 2021;
originally announced April 2021.
-
Energy exchange between surface plasmon polaritons and CdSe/ZnS quantum dots
Authors:
Kunal Tiwari,
Suresh C Sharma,
Hussein Akafzade,
Nader Hozhabri
Abstract:
Evidence is presented for energy exchange between surface plasmon polaritons (SPPs) excited in waveguide-coupled Ag/Si3N4/Au structures and CdSe/ZnS quantum dot (QD) emitters. The QD dispersion is coated on the surface of Ag/Si3N4/Au nanostructure, surface plasmon resonance (SPR) is excited on surface of multilayered structure and the photoluminescence (PL) emission by the QDs is monitored as a fu…
▽ More
Evidence is presented for energy exchange between surface plasmon polaritons (SPPs) excited in waveguide-coupled Ag/Si3N4/Au structures and CdSe/ZnS quantum dot (QD) emitters. The QD dispersion is coated on the surface of Ag/Si3N4/Au nanostructure, surface plasmon resonance (SPR) is excited on surface of multilayered structure and the photoluminescence (PL) emission by the QDs is monitored as a function of the evanescent electric field by using fixed-detector pump-probe spectroscopy. We observe relatively large shift in the PL emission wavelength (corresponding to 4-5 meV) with accompanying electric field induced quenching (up to 50%) of the emission. Under the influence of the evanescent field, the PL emission peak splits into two components corresponding to two frequencies (Rabi splitting). Computer simulations are used to understand conditions under which Rabi splitting should occur.
△ Less
Submitted 8 July, 2020;
originally announced July 2020.
-
Application of single metal Au and Ag/Si3N4/Au plasmonic sensors for glucose refractive index measurements
Authors:
Hussein Akafzade,
Nader Hozhabri,
Suresh C Sharma
Abstract:
We have employed single gold layer metal and multilayer Ag/Si3N4/Au plasmonic sensors to monitor changes in the refraction index of glucose/water solutions. Our results show that the sensor can resolve glucose refractive index down to 1% concentration. In addition, we have simulated the strength of the surface plasmon resonance evanescent electric fields by using the finite difference method of CO…
▽ More
We have employed single gold layer metal and multilayer Ag/Si3N4/Au plasmonic sensors to monitor changes in the refraction index of glucose/water solutions. Our results show that the sensor can resolve glucose refractive index down to 1% concentration. In addition, we have simulated the strength of the surface plasmon resonance evanescent electric fields by using the finite difference method of COMSOL. The electric field strength for the Ag/Si3N4/Au sensor is much stronger than that for single gold layer SPR sensor.
△ Less
Submitted 30 June, 2020;
originally announced July 2020.
-
A Study of Correlations in the Stock Market
Authors:
Chandradew Sharma,
Kinjal Banerjee
Abstract:
We study the various sectors of the Bombay Stock Exchange(BSE) for a period of 8 years from April 2006 - March 2014. Using the data of daily returns of a period of eight years we make a direct model free analysis of the pattern of the sectorial indices movement and the correlations among them. Our analysis shows significant auto correlation among the individual sectors and also strong cross-correl…
▽ More
We study the various sectors of the Bombay Stock Exchange(BSE) for a period of 8 years from April 2006 - March 2014. Using the data of daily returns of a period of eight years we make a direct model free analysis of the pattern of the sectorial indices movement and the correlations among them. Our analysis shows significant auto correlation among the individual sectors and also strong cross-correlation among sectors. We also find that auto correlations in some of the sectors persist in time. This is a very significant result and has not been reported so far in Indian context These findings will be very useful in model building for prediction of price movement of equities, derivatives and portfolio management. We show that the Random Walk Hypothesis is not applicable in modeling the Indian market and Mean-Variance-Skewness-Kurtosis based portfolio optimization might be required. We also find that almost all sectors are highly correlated during large fluctuation periods and have only moderate correlation during normal periods.
△ Less
Submitted 22 April, 2015;
originally announced April 2015.
-
Bubble bean bags in shampoo
Authors:
Anup Kundu,
Chandan Sharma,
Gargi Das,
G. Harikrishnan
Abstract:
In these fluid dynamics videos, we, for the first time, show various interactions of a 'Taylor bubble' with their smaller and differently, shaped counterparts, in a shear thinning, non-Newtonian fluid, confined in a narrow channel.
In these fluid dynamics videos, we, for the first time, show various interactions of a 'Taylor bubble' with their smaller and differently, shaped counterparts, in a shear thinning, non-Newtonian fluid, confined in a narrow channel.
△ Less
Submitted 14 October, 2011;
originally announced October 2011.
-
Inhomogeneous Energy - Density Driven Instability in Presence of a Transverse DC Electric Fields in a Magnetized Plasma Cylinder
Authors:
Suresh C. Sharma,
Satoshi Hamaguchi
Abstract:
Temporal evolution of the inhomogeneous energy density driven instability (IEDDI) is examined in presence of a nonuniform transverse dc electric field in collisional magnetized plasma cylinder. Using experimentally known parameters relevant to IEDDI, we have estimated the growth rate for $ν$=1, 2 and 3 nonlocal eigenmodes.
Temporal evolution of the inhomogeneous energy density driven instability (IEDDI) is examined in presence of a nonuniform transverse dc electric field in collisional magnetized plasma cylinder. Using experimentally known parameters relevant to IEDDI, we have estimated the growth rate for $ν$=1, 2 and 3 nonlocal eigenmodes.
△ Less
Submitted 19 October, 2004;
originally announced October 2004.
-
Current-Driven Dust Ion-Cyclotron Waves in Presence of a Transverse DC Electric Fields in Magnetized Plasma with Charge Fluctuations
Authors:
Suresh C. Sharma,
Satoshi Hamaguchi
Abstract:
The current-driven electrostatic ion-cyclotron (EIC) instability is studied in presence of a transverse dc electric fields in a collisional magnetized dusty plasma. We derive the appropriate charging equation self consistently by using the Vlasov equation.
The current-driven electrostatic ion-cyclotron (EIC) instability is studied in presence of a transverse dc electric fields in a collisional magnetized dusty plasma. We derive the appropriate charging equation self consistently by using the Vlasov equation.
△ Less
Submitted 19 October, 2004;
originally announced October 2004.
-
Gain and Efficiency Enhancement in Free Electron Laser by Means of Modulated Electron Beam
Authors:
Vivek Beniwal,
Suresh C. Sharma,
Satoshi Hamaguchi
Abstract:
Beam premodulation on free electron laser (FEL) offers considerable enhancement in gain and efficiency when the phase of the premodulated beam is -pi/2 and the beam is highly modulated implying the maximum beam oscillatory velocity due to wiggler. The growth rate of the FEL instability increases with the modulation index and reaches maximum when the modulation index $Δ\sim 1.0$.
Beam premodulation on free electron laser (FEL) offers considerable enhancement in gain and efficiency when the phase of the premodulated beam is -pi/2 and the beam is highly modulated implying the maximum beam oscillatory velocity due to wiggler. The growth rate of the FEL instability increases with the modulation index and reaches maximum when the modulation index $Δ\sim 1.0$.
△ Less
Submitted 7 October, 2004;
originally announced October 2004.
