-
Capacity Enhancement Analysis and Implementation of a 3D Array Based on Miniaturized Dipole Antennas
Authors:
Yongzheng Li,
Wanchen Yang,
Shuai S. A. Yuan,
Zhitao Ye,
Chongwen Huang,
Xiaoming Chen,
Wenquan Che,
Wei E. I. Sha
Abstract:
Theoretically, the three-dimensional (3D) array architecture provides a higher communication degree of freedom (DoF) compared to the planar arrays, allowing for greater capacity potential in multiple-input multiple-output (MIMO) systems. However, in practical implementations, the upper elements of 3D arrays significantly degrade the performance of the lower elements, leading to increased inter-ele…
▽ More
Theoretically, the three-dimensional (3D) array architecture provides a higher communication degree of freedom (DoF) compared to the planar arrays, allowing for greater capacity potential in multiple-input multiple-output (MIMO) systems. However, in practical implementations, the upper elements of 3D arrays significantly degrade the performance of the lower elements, leading to increased inter-element correlation and reduced array efficiency. As a result, the expected enhancement in MIMO performance is often suboptimal. To address this issue, this work employs a miniaturized antenna element to reduce the inter-element correlation and thus enhance the DoF of the 3D array. Moreover, to mitigate the efficiency degradation of the lower elements caused by the upper ones, the structures of lower elements are modified to achieve wideband impedance matching. The influence of upper element profile distribution on DoF and element efficiency is investigated, and the scalability of the proposed 3D array is theoretically analyzed. Finally, the MIMO performance of the proposed 3D array is evaluated under 3GPP scenarios, demonstrating a 16% higher capacity than conventional 2D arrays under the same SNR of 20 dB and a physical aperture area of 6.26 λ02. These results indicate that 3D arrays of appropriately arranged miniaturized elements offer a promising approach to enhancing MIMO system performance.
△ Less
Submitted 24 May, 2025;
originally announced May 2025.
-
Robust entangled photon generation enabled by single-shot Floquet driving
Authors:
Jun-Yong Yan,
Paul C. A. Hagen,
Hans-Georg Babin,
Wei E. I. Sha,
Andreas D. Wieck,
Arne Ludwig,
Chao-Yuan Jin,
Vollrath M. Axt,
Da-Wei Wang,
Moritz Cygorek,
Feng Liu
Abstract:
Quantum emitters driven by resonant two-photon excitation are a leading source for deterministically generated entangled photon pairs, essential for scalable photonic quantum technologies. However, conventional resonant schemes are highly sensitive to laser power fluctuations and pose additional experimental challenges for emitters with small biexciton binding energies. Here, we demonstrate how bi…
▽ More
Quantum emitters driven by resonant two-photon excitation are a leading source for deterministically generated entangled photon pairs, essential for scalable photonic quantum technologies. However, conventional resonant schemes are highly sensitive to laser power fluctuations and pose additional experimental challenges for emitters with small biexciton binding energies. Here, we demonstrate how biexciton preparation schemes with significantly improved robustness and reduced laser filtering requirements can be identified using a novel design principle beyond resonant and adiabatic driving: ultrafast single-shot Floquet driving. This is achieved by employing two strongly and symmetrically detuned dichromatic pulses, whose superposition generates a stroboscopic Hamiltonian that enables direct coupling between ground and biexciton states. Moreover, a pulse delay serves as a tuning knob, introducing an effective magnetic field that concentrates the Bloch sphere trajectory at the biexciton state for a wide range of parameters, making biexciton preparation particularly robust. Experimentally, we achieve a biexciton occupation exceeding 96% and preserve photon-pair entanglement with a fidelity of 93.4%. Our scheme highlights the great impact of Floquet-engineered multicolour excitation protocols for on-demand quantum light sources.
△ Less
Submitted 6 May, 2025; v1 submitted 3 April, 2025;
originally announced April 2025.
-
High-Order Modulation Large MIMO Detector Based on Physics-Inspired Methods
Authors:
Qing-Guo Zeng,
Xiao-Peng Cui,
Xian-Zhe Tao,
Jia-Qi Hu,
Shi-Jie Pan,
Wei E. I. Sha,
Man-Hong Yung
Abstract:
Applying quantum annealing or current quantum-/physics-inspired algorithms for MIMO detection always abandon the direct gray-coded bit-to-symbol mapping in order to obtain Ising form, leading to inconsistency errors. This often results in slow convergence rates and error floor, particularly with high-order modulations. We propose HOPbit, a novel MIMO detector designed to address this issue by tran…
▽ More
Applying quantum annealing or current quantum-/physics-inspired algorithms for MIMO detection always abandon the direct gray-coded bit-to-symbol mapping in order to obtain Ising form, leading to inconsistency errors. This often results in slow convergence rates and error floor, particularly with high-order modulations. We propose HOPbit, a novel MIMO detector designed to address this issue by transforming the MIMO detection problem into a higher-order unconstrained binary optimization (HUBO) problem while maintaining gray-coded bit-to-symbol mapping. The method then employs the simulated probabilistic bits (p-bits) algorithm to directly solve HUBO without degradation. This innovative strategy enables HOPbit to achieve rapid convergence and attain near-optimal maximum-likelihood performance in most scenarios, even those involving high-order modulations. The experiments show that HOPbit surpasses ParaMax by several orders of magnitude in terms of bit error rate (BER) in the context of 12-user massive and large MIMO systems even with computing resources. In addition, HOPbit achieves lower BER rates compared to other traditional detectors.
△ Less
Submitted 24 February, 2025;
originally announced February 2025.
-
Extraction of power transmission parameters from PT-symmetric waveguides
Authors:
Chengnian Huang,
Zhihao Lan,
Menglin L. N. Chen,
Wei E. I. Sha
Abstract:
The PT-symmetric waveguides have been frequently discussed in the photonics community due to their extraordinary properties. Especially, the study of power transmission is significant for switching applications. The aim of this study is to extract the mode power transmission parameters based on the coupled mode equations and analyze the power properties of the PT-symmetric system. The equations re…
▽ More
The PT-symmetric waveguides have been frequently discussed in the photonics community due to their extraordinary properties. Especially, the study of power transmission is significant for switching applications. The aim of this study is to extract the mode power transmission parameters based on the coupled mode equations and analyze the power properties of the PT-symmetric system. The equations relying on the coupled mode theory are constructed according to the two different orthogonality relations between the original and adjoint system. The results matching well with the finite difference simulations demonstrate the validity of our method, while the conventional coupled mode theory fails. The power properties in the PT-symmetric and PT-broken phases are also observed. Furthermore, a new integration is implemented from which the conserved quantity is defined and extracted, which reflects the Hamiltonian invariant of the system. Our method fully incorporates the properties of complex modes and allows the study of the power transmission properties based on the orthogonality relations, which is also applicable to other types of non-Hermitian optical systems. This work provides a new perspective for the power analysis of PT-symmetric waveguides and is helpful to design the switching devices.
△ Less
Submitted 8 February, 2025;
originally announced February 2025.
-
A Parallel Block Preconditioner-Based VIE-FFT Algorithm for Modeling the Electromagnetic Response From Nanostructures
Authors:
Chengnian Huang,
Wei E. I. Sha
Abstract:
The superior ability of nanostructures to manipulate light has propelled extensive applications in nano-electromagnetic components and devices. Computational electromagnetics plays a critical role in characterizing and optimizing the nanostructures. In this work, a parallel block preconditioner based volume integral equation (VIE)-fast Fourier transform (FFT) algorithm is proposed to model the ele…
▽ More
The superior ability of nanostructures to manipulate light has propelled extensive applications in nano-electromagnetic components and devices. Computational electromagnetics plays a critical role in characterizing and optimizing the nanostructures. In this work, a parallel block preconditioner based volume integral equation (VIE)-fast Fourier transform (FFT) algorithm is proposed to model the electromagnetic response from representative nanostructures. The VIE using uniform Cartesian grids is first built, and then the entire volumetric domain is partitioned into geometric subdomains based on the regularity and topology of the nanostructure. The block diagonal matrix is thus established, whose inverse matrix serves as a preconditioner for the original matrix equation. The resulting linear system is solved by the bi-conjugate gradient stabilized (BiCGSTAB) method with different residual error tolerances in the inner and outer iteration processes; and the FFT algorithm is used to accelerate the matrix-vector product (MVM) operations throughout. Furthermore, because of the independence between the inner processes of solving block matrix equations, the OpenMP framework is empolyed to execute the parallel operations. Numerical experiments indicate that the proposed method is effective and reduces both the iteration number and the computational time significantly for the representative nano-electromagnetic problems like the dielectric focusing metasurfaces and the plasmonic solar cells.
△ Less
Submitted 23 January, 2025;
originally announced January 2025.
-
SolarDesign: An Online Photovoltaic Device Simulation and Design Platform
Authors:
Wei E. I. Sha,
Xiaoyu Wang,
Wenchao Chen,
Yuhao Fu,
Lijun Zhang,
Liang Tian,
Minshen Lin,
Shudi Jiao,
Ting Xu,
Tiange Sun,
Dongxue Liu
Abstract:
SolarDesign (https://solardesign.cn/) is an online photovoltaic device simulation and design platform that provides engineering modeling analysis for crystalline silicon solar cells, as well as emerging high-efficiency solar cells such as organic, perovskite, and tandem cells. The platform offers user-updatable libraries of basic photovoltaic materials and devices, device-level multi-physics simul…
▽ More
SolarDesign (https://solardesign.cn/) is an online photovoltaic device simulation and design platform that provides engineering modeling analysis for crystalline silicon solar cells, as well as emerging high-efficiency solar cells such as organic, perovskite, and tandem cells. The platform offers user-updatable libraries of basic photovoltaic materials and devices, device-level multi-physics simulations involving optical-electrical-thermal interactions, and circuit-level compact model simulations based on detailed balance theory. Employing internationally advanced numerical methods, the platform accurately, rapidly, and efficiently solves optical absorption, electrical transport, and compact circuit models. It achieves multi-level photovoltaic simulation technology from ``materials to devices to circuits'' with fully independent intellectual property rights. Compared to commercial software, the platform achieves high accuracy and improves speed by more than an order of magnitude. Additionally, it can simulate unique electrical transport processes in emerging solar cells, such as quantum tunneling, exciton dissociation, and ion migration.
△ Less
Submitted 27 December, 2024;
originally announced December 2024.
-
Photonic Terahertz Phased Array
Authors:
Li Niu,
Xi Feng,
Xueqian Zhang,
Yongchang Lu,
Qingwei Wang,
Quan Xu,
Xieyu Chen,
Jiajun Ma,
Haidi Qiu,
Wei E. I. Sha,
Shuang Zhang,
Andrea Alù,
Weili Zhang,
Jiaguang Han
Abstract:
Phased arrays are crucial in various technologies, such as radar and wireless communications, due to their ability to precisely control and steer electromagnetic waves. This precise control improves signal processing and enhances imaging performance. However, extending phased arrays to the terahertz (THz) frequency range has proven challenging, especially for high-frequency operation, broadband pe…
▽ More
Phased arrays are crucial in various technologies, such as radar and wireless communications, due to their ability to precisely control and steer electromagnetic waves. This precise control improves signal processing and enhances imaging performance. However, extending phased arrays to the terahertz (THz) frequency range has proven challenging, especially for high-frequency operation, broadband performance, two-dimensional (2D) phase control with large antenna arrays, and strong phase modulation. Here, we introduce a photonic platform to realize a THz phased array that bypasses the above challenges. Our method employs 2D phase coding with 2-bit across a broad THz frequency range from 0.8 to 1.4 THz. The core of our design is a pixelated nonlinear Pancharatnam-Berry metasurface driven by a spatially modulated femtosecond laser, allowing precise phase control of THz signals. We showcase the effectiveness of our method through four proof-of-concept applications: single beamforming, dual beamforming, imaging and vortex beam generation. The realized photonic platform provides a promising pathway for developing broadband phased arrays in the THz regime.
△ Less
Submitted 17 December, 2024;
originally announced December 2024.
-
Cavity-Quantum Electrodynamics with Moiré Flatband Photonic Crystals
Authors:
Yu-Tong Wang,
Qi-Hang Ye,
Jun-Yong Yan,
Yufei Qiao,
Chen Chen,
Xiao-Tian Cheng,
Chen-Hui Li,
Zi-Jian Zhang,
Cheng-Nian Huang,
Yun Meng,
Kai Zou,
Wen-Kang Zhan,
Chao Zhao,
Xiaolong Hu,
Clarence Augustine T H Tee,
Wei E. I. Sha,
Zhixiang Huang,
Huiyun Liu,
Chao-Yuan Jin,
Lei Ying,
Feng Liu
Abstract:
Quantum emitters are a key component in photonic quantum technologies. Enhancing their single-photon emission by engineering the photonic environment using cavities can significantly improve the overall efficiency in quantum information processing. However, this enhancement is often constrained by the need for precise nanoscale control over the emitter's position within micro- or nano-cavities. In…
▽ More
Quantum emitters are a key component in photonic quantum technologies. Enhancing their single-photon emission by engineering the photonic environment using cavities can significantly improve the overall efficiency in quantum information processing. However, this enhancement is often constrained by the need for precise nanoscale control over the emitter's position within micro- or nano-cavities. Inspired by the fascinating physics of moiré patterns, we present an approach to strongly modify the spontaneous emission rate of a quantum emitter using a finely designed multilayer moiré photonic crystal with a robust isolated-flatband dispersion. Theoretical analysis reveals that, due to its nearly infinite photonic density of states, the moiré cavity can simultaneously achieve a high Purcell factor and exhibit large tolerance over the emitter's position. We experimentally demonstrate the coupling between this moiré cavity and a quantum dot through the cavity-determined polarization of the dot's emission. The radiative lifetime of the quantum dot can be tuned by a factor of 40, ranging from 42 ps to 1692 ps, which is attributed to strong Purcell enhancement and Purcell inhibition effects. Our findings pave the way for moiré flatband cavity-enhanced quantum light sources, quantum optical switches, and quantum nodes for quantum internet applications.
△ Less
Submitted 6 June, 2025; v1 submitted 25 November, 2024;
originally announced November 2024.
-
A wireless passive pressure sensor with high sensitivity
Authors:
Baiyun Wang,
Yijia Cheng,
Yujie Hua,
Wenxuan Tang,
Wei E. I. Sha,
Hao Xu,
Kang Wang,
Jundi Hu,
Huaqing Fan,
Huanran Peng,
Gang Shao
Abstract:
A high-sensitivity wireless pressure sensor with active processing structure designed on the dielectric substrate has been present and evaluated in this paper. The sensor configuration has been optimized by computer-aided design to achieve highest sensitivity and maximum working range for a given dimension. With the average sensitivity of 187kHz/kPa, the proposed pressure sensor is equipped with t…
▽ More
A high-sensitivity wireless pressure sensor with active processing structure designed on the dielectric substrate has been present and evaluated in this paper. The sensor configuration has been optimized by computer-aided design to achieve highest sensitivity and maximum working range for a given dimension. With the average sensitivity of 187kHz/kPa, the proposed pressure sensor is equipped with the ability to measure pressure loaded up to 1.5MPa under room temperature. Additionally, a novel simulation method applied on pressure related design is proposed in this article, with the accuracy reaching threefold enhancement, filling the blank of electromagnetic simulation of pressure deformation. Other characteristics of the devices have been investigated and are presented.
△ Less
Submitted 24 November, 2024;
originally announced November 2024.
-
Enabling low threshold laser through an asymmetric tetramer metasurface harnessing polarization-independent quasi-BICs
Authors:
T. Wang,
W. Z. Di,
W. E. I. Sha,
R. P. Zaccaria
Abstract:
We propose and numerically demonstrate a novel strategy to achieve dual-band symmetry-protected bound states in the continuum (BICs) based on a nanodisk tetramer metasurface for lasing generation. The method involves breaking the in-plane symmetry along the diagonal of the metasurface unit cell by introducing air holes in the tetramers. Through our simulations, we show that this flexible approach…
▽ More
We propose and numerically demonstrate a novel strategy to achieve dual-band symmetry-protected bound states in the continuum (BICs) based on a nanodisk tetramer metasurface for lasing generation. The method involves breaking the in-plane symmetry along the diagonal of the metasurface unit cell by introducing air holes in the tetramers. Through our simulations, we show that this flexible approach enables the support of dual-band BICs in the telecom-band range, with these modes evolving into quasi-BICs with remarkably high quality factors by breaking the symmetry of the system. Furthermore, the ultracompact device exhibits the unique characteristic of being polarization-independent across all viewing angles. Finally, the optically pumped gain medium provides sufficient optical gain to compensate the quasi-BIC mode losses, enabling two mode lasing with ultra-low pump threshold and very narrow optical linewidth in the telecom-band range. Our adaptable device paves the way for polarization-insensitive metasurfaces with multiple lasing resonances. This innovation holds the potential to transform areas like low-threshold lasing and biosensing by delivering improved performance and broader capabilities.
△ Less
Submitted 25 November, 2024; v1 submitted 24 November, 2024;
originally announced November 2024.
-
Quantum-inspired Beamforming Optimization for Quantized Phase-only Massive MIMO Arrays
Authors:
Yutong Jiang,
Hangyu Ge,
Bi-Ying Wang,
Shuai S. A. Yuan,
Shi-Jie Pan,
Hongjing Xu,
Xiaopeng Cui,
Man-Hong Yung,
Feng Liu,
Wei E. I. Sha
Abstract:
This paper introduces an innovative quantum-inspired method for beamforming (BF) optimization in multiple-input multiple-output (MIMO) arrays. The method leverages the simulated bifurcation (SB) algorithm to address the complex combinatorial optimization problem due to the quantized phase configuration. We propose novel encoding techniques for high-bit phase quantization, which are then mapped int…
▽ More
This paper introduces an innovative quantum-inspired method for beamforming (BF) optimization in multiple-input multiple-output (MIMO) arrays. The method leverages the simulated bifurcation (SB) algorithm to address the complex combinatorial optimization problem due to the quantized phase configuration. We propose novel encoding techniques for high-bit phase quantization, which are then mapped into Ising spins. This enables efficient construction of the Hamiltonians and subsequent optimization of BF patterns. The results clearly demonstrate that the SB optimizer surpasses traditional schemes such as digital BF, holographic algorithms and genetic algorithms, offering faster convergence and higher solution quality. The impressive capability of the SB optimizer to handle complex BF scenarios, including sidelobe suppression and multiple beams with nulls, is undoubtedly demonstrated through several application cases. These findings strongly suggest that quantum-inspired methods have great potential to advance MIMO techniques in next-generation wireless communication.
△ Less
Submitted 28 May, 2025; v1 submitted 30 September, 2024;
originally announced September 2024.
-
Spin and Orbital Angular Momenta of Electromagnetic Waves: From Classical to Quantum Forms
Authors:
Wei E. I. Sha,
Zhihao Lan,
Menglin L. N. Chen,
Yongpin P. Chen,
Sheng Sun
Abstract:
Angular momenta of electromagnetic waves are important both in concepts and applications. In this work, we systematically discuss two types of angular momenta, i.e., spin angular momentum and orbital angular momentum in various cases, e.g., with source and without source, in classical and quantum forms. Numerical results demonstrating how to extract the topological charge of a classical vortex bea…
▽ More
Angular momenta of electromagnetic waves are important both in concepts and applications. In this work, we systematically discuss two types of angular momenta, i.e., spin angular momentum and orbital angular momentum in various cases, e.g., with source and without source, in classical and quantum forms. Numerical results demonstrating how to extract the topological charge of a classical vortex beam by spectral method are also presented.
△ Less
Submitted 3 March, 2024;
originally announced March 2024.
-
Quantifying Nonradiative Recombination and Resistive Losses in Perovskite Photovoltaics: A Modified Diode Model Approach
Authors:
Minshen Lin,
Xuehui Xu,
Hong Tian,
Yang Michael Yang,
Wei E. I. Sha,
Wenxing Zhong
Abstract:
Pinpointing the origin of inefficiency can expedite the process of optimizing the efficiency of perovskite photovoltaics. However, it is challenging to discern and quantify the different loss pathways in a complete perovskite photovoltaic device under operational conditions. To address this challenge, we propose a modified diode model that can quantify bulk/interface defect-assisted recombination…
▽ More
Pinpointing the origin of inefficiency can expedite the process of optimizing the efficiency of perovskite photovoltaics. However, it is challenging to discern and quantify the different loss pathways in a complete perovskite photovoltaic device under operational conditions. To address this challenge, we propose a modified diode model that can quantify bulk/interface defect-assisted recombination and series/shunt resistive losses. By adopting drift-diffusion simulation as the benchmark, we explore the physical meanings of the modified diode model parameters and evaluate the performance of the model for simulation parameters spanning many orders of magnitude. Our evaluation shows that, in most practical cases, the proposed model can accurately quantify all the aforementioned losses, and in some special cases, it is possible to identify the predominant loss pathway. Moreover, we apply the modified diode model to our lab-produced devices (based on Cs0.05FA0.95PbI3 perovskites), demonstrating its effectiveness in quantifying entangled losses in practice. Finally, we provide a set of guidelines for applying the modified diode model and interpreting the results. Source code available at https://github.com/WPT-Lab124/Modified-Diode-Model.
△ Less
Submitted 30 November, 2023; v1 submitted 29 November, 2023;
originally announced November 2023.
-
Breaking the Degrees-of-Freedom Limit of Holographic MIMO Communications: A 3-D Antenna Array Topology
Authors:
Shuai S. A. Yuan,
Jie Wu,
Hongjing Xu,
Tengjiao Wang,
Da Li,
Xiaoming Chen,
Chongwen Huang,
Sheng Sun,
Shilie Zheng,
Xianmin Zhang,
Er-Ping Li,
Wei E. I. Sha
Abstract:
The performance of holographic multiple-input multiple-output (MIMO) communications, employing two-dimensional (2-D) planar antenna arrays, is typically compromised by finite degrees-of-freedom (DOF) stemming from limited array size. The DOF constraint becomes significant when the element spacing approaches approximately half a wavelength, thereby restricting the overall performance of MIMO system…
▽ More
The performance of holographic multiple-input multiple-output (MIMO) communications, employing two-dimensional (2-D) planar antenna arrays, is typically compromised by finite degrees-of-freedom (DOF) stemming from limited array size. The DOF constraint becomes significant when the element spacing approaches approximately half a wavelength, thereby restricting the overall performance of MIMO systems. To break this inherent limitation, we propose a novel three-dimensional (3-D) antenna array that strategically explores the untapped vertical dimension. We investigate the performance of MIMO systems utilizing 3-D arrays across different multi-path scenarios, encompassing Rayleigh channels with varying angular spreads and the 3rd generation partnership project (3GPP) channels. We subsequently showcase the advantages of these 3-D arrays over their 2-D counterparts with the same aperture sizes. As a proof of concept, a practical dipole-based 3-D array, facilitated by an electromagnetic band-gap (EBG) reflecting surface, is conceived, constructed, and evaluated. The experimental results align closely with full-wave simulations, and channel simulations substantiate that the DOF and capacity constraints of traditional holographic MIMO systems can be surpassed by adopting such a 3-D array configuration.
△ Less
Submitted 27 February, 2024; v1 submitted 6 November, 2023;
originally announced November 2023.
-
Effects of Mutual Coupling on Degree of Freedom and Antenna Efficiency in Holographic MIMO Communications
Authors:
Shuai S. A. Yuan,
Xiaoming Chen,
Chongwen Huang,
Wei E. I. Sha
Abstract:
The holographic multiple-input-multiple-output (MIMO) communications refer to the MIMO systems built with ultra-dense antenna arrays, whose channel models and potential applications have attracted increasing attentions recently. When the spacing between adjacent array elements is larger than half wavelength, the effect of mutual coupling can generally be neglected in current antenna designs. Howev…
▽ More
The holographic multiple-input-multiple-output (MIMO) communications refer to the MIMO systems built with ultra-dense antenna arrays, whose channel models and potential applications have attracted increasing attentions recently. When the spacing between adjacent array elements is larger than half wavelength, the effect of mutual coupling can generally be neglected in current antenna designs. However, in holographic MIMO communications, the influence of strong mutual coupling on antenna characteristics is inevitable, resulting in distorted radiation patterns and low radiation efficiencies. In this paper, starting from the analytical correlation and efficiency models, we investigate how the mutual coupling affects the capacity of a space-constrained MIMO system from the aspects of degree of freedom (DOF) and antenna efficiency. The involved fundamental concepts of correlation, DOF, efficiency and mutual coupling are crucial for both antenna and wireless-communication engineers when designing emerging MIMO communication systems.
△ Less
Submitted 14 March, 2023;
originally announced March 2023.
-
Large-area quantum-spin-Hall waveguide states in a three-layer topological photonic crystal heterostructure
Authors:
Zhihao Lan,
Menglin L. N. Chen,
Jian Wei You,
Wei E. I. Sha
Abstract:
Topological photonic edge states are conventionally formed at the interface between two domains of topologically trivial and nontrivial photonic crystals. Recent works exploiting photonic quantum Hall and quantum valley Hall effects have shown that large-area topological waveguide states could be created in a three-layer topological heterostructure that consists of a finite-width domain featuring…
▽ More
Topological photonic edge states are conventionally formed at the interface between two domains of topologically trivial and nontrivial photonic crystals. Recent works exploiting photonic quantum Hall and quantum valley Hall effects have shown that large-area topological waveguide states could be created in a three-layer topological heterostructure that consists of a finite-width domain featuring Dirac cone sandwiched between two domains of photonic crystals with opposite topological properties. In this work, we show that a new kind of large-area topological waveguide states could be created employing the photonic analogs of quantum spin Hall effect. Taking the well-used Wu-Hu model in topological photonics as an example, we show that sandwiching a finite-width domain of photonic crystals featuring double Dirac cone between two domains of expanded and shrunken unit cells could lead to the emergence of large-area topological helical waveguide states distributed uniformly in the middle domain. Importantly, we unveil a power-law scaling regarding to the size of the bandgap within which the large-area helical states reside as a function of the width of the middle domain, which implies that these large-area modes in principle could exist in the middle domain with arbitrary width. Moreover, pseudospin-momentum locking unidirectional propagations and robustness of these large-area waveguide modes against sharp bends are explicitly demonstrated. Our work enlarges the photonic systems and platforms that could be utilized for large-area-mode enabled topologically waveguiding.
△ Less
Submitted 25 April, 2023; v1 submitted 17 October, 2022;
originally announced October 2022.
-
A Topological Directional Coupler Fed by Microstrip Line with Configurable Coupling Coefficient
Authors:
HongYu Shi,
BoLin Li,
Wei. E. I. Sha,
ZhiHao Lan,
Fei Gao,
JianJia Yi,
AnXue Zhang,
Zhuo Xu
Abstract:
Topological waveguides have been extensively studied for their robust transmission properties immune to defects and their application potentials for microwave and terahertz integrated circuits. In this work, by using grounded planar valley-Hall photonic topological insulators, a high-efficiency topological directional coupler fed directly by microstrip line with configurable coupling coefficient i…
▽ More
Topological waveguides have been extensively studied for their robust transmission properties immune to defects and their application potentials for microwave and terahertz integrated circuits. In this work, by using grounded planar valley-Hall photonic topological insulators, a high-efficiency topological directional coupler fed directly by microstrip line with configurable coupling coefficient is theoretically proposed and experimentally demonstrated. The topological directional coupler consists of two coupled topological waveguides, which can be directly integrated with microstrip circuits. Different coupling coefficients were achieved by configuring the coupling between the two topological waveguides. Both simulation and measurement demonstrated the proposed designs. In addition, the proposed design is applicable in both microwave and terahertz bands.
△ Less
Submitted 7 October, 2022;
originally announced October 2022.
-
A brief review of topological photonics in one, two, and three dimensions
Authors:
Zhihao Lan,
Menglin L. N. Chen,
Fei Gao,
Shuang Zhang,
Wei E. I. Sha
Abstract:
Topological photonics has attracted increasing attention in recent years due to the unique opportunities it provides to manipulate light in a robust way immune to disorder and defects. Up to now, diverse photonic platforms, rich physical mechanisms and fruitful device applications have been proposed for topological photonics, including one-way waveguide, topological lasing, topological nanocavity,…
▽ More
Topological photonics has attracted increasing attention in recent years due to the unique opportunities it provides to manipulate light in a robust way immune to disorder and defects. Up to now, diverse photonic platforms, rich physical mechanisms and fruitful device applications have been proposed for topological photonics, including one-way waveguide, topological lasing, topological nanocavity, Dirac and Weyl points, Fermi arcs, nodal lines, etc. In this review, we provide an introduction to the field of topological photonics through the lens of topological invariants and bulk-boundary correspondence in one, two, and three dimensions, which may not only offer a unified understanding about the underlying robustness of diverse and distinct topological phenomena of light, but could also inspire further developments by introducing new topological invariants and unconventional bulk-boundary correspondence to the research of topological photonics.
△ Less
Submitted 18 September, 2022;
originally announced September 2022.
-
On The Low Speed Limits of Lorentz's Transformation
Authors:
Hao Chen,
Wei E. I. Sha,
Xi Dai,
Yue Yu
Abstract:
This article contains a digest of the theory of electromagnetism and a review of the transformation between inertial frames, especially under low speed limits. The covariant nature of the Maxwell's equations is explained using the conventional language. We show that even under low speed limits, the relativistic effects should not be neglected to get a self-consistent theory of the electromagnetic…
▽ More
This article contains a digest of the theory of electromagnetism and a review of the transformation between inertial frames, especially under low speed limits. The covariant nature of the Maxwell's equations is explained using the conventional language. We show that even under low speed limits, the relativistic effects should not be neglected to get a self-consistent theory of the electromagnetic fields, unless the intrinsic dynamics of these fields has been omitted completely. The quasi-static limits, where the relativistic effects can be partly neglected are also reviewed, to clarify some common misunderstandings and imprecise use of the theory in presence of moving media and other related situations. The discussion presented in this paper provide a clear view of why classical electromagnetic theory is relativistic in its essence.
△ Less
Submitted 30 April, 2022; v1 submitted 17 February, 2022;
originally announced February 2022.
-
Comparative study of Hermitian and non-Hermitian topological dielectric photonic crystals
Authors:
Menglin L. N. Chen,
Li Jun Jiang,
Shuang Zhang,
Ran Zhao,
Zhihao Lan,
Wei E. I. Sha
Abstract:
The effects of gain and loss on the band structures of a bulk topological dielectric photonic crystal (PC) with $C_{6v}$ symmetry and the PC-air-PC interface are studied based on first-principle calculation. To illustrate the importance of parity-time (PT) symmetry, three systems are considered, namely the PT-symmetric, PT-asymmetric, and lossy systems. We find that the system with gain and loss d…
▽ More
The effects of gain and loss on the band structures of a bulk topological dielectric photonic crystal (PC) with $C_{6v}$ symmetry and the PC-air-PC interface are studied based on first-principle calculation. To illustrate the importance of parity-time (PT) symmetry, three systems are considered, namely the PT-symmetric, PT-asymmetric, and lossy systems. We find that the system with gain and loss distributed in a PT symmetric manner exhibits a phase transition from a PT exact phase to a PT broken phase as the strength of the gain and loss increases, while for the PT-asymmetric and lossy systems, no such phase transition occurs. Furthermore, based on the Wilson loop calculation, the topology of the PT-symmetric system in the PT exact phase is demonstrated to keep unchanged as the Hermitian system. At last, different kinds of edge states in Hermitian systems under the influences of gain and loss are studied and we find that while the eigenfrequencies of nontrivial edge states become complex conjugate pairs, they keep real for the trivial defect states.
△ Less
Submitted 6 January, 2022; v1 submitted 12 September, 2021;
originally announced September 2021.
-
Approaching the Fundamental Limit of Orbital Angular Momentum Multiplexing Through a Hologram Metasurface
Authors:
Shuai S. A. Yuan,
Jie Wu,
Menglin L. N. Chen,
Zhihao Lan,
Liang Zhang,
Sheng Sun,
Zhixiang Huang,
Xiaoming Chen,
Shilie Zheng,
Li Jun Jiang,
Xianmin Zhang,
Wei E. I. Sha
Abstract:
Establishing and approaching the fundamental limit of orbital angular momentum (OAM) multiplexing are necessary and increasingly urgent for current multiple-input multiple-output research. In this work, we elaborate the fundamental limit in terms of independent scattering channels (or degrees of freedom of scattered fields) through angular-spectral analysis, in conjunction with a rigorous Green fu…
▽ More
Establishing and approaching the fundamental limit of orbital angular momentum (OAM) multiplexing are necessary and increasingly urgent for current multiple-input multiple-output research. In this work, we elaborate the fundamental limit in terms of independent scattering channels (or degrees of freedom of scattered fields) through angular-spectral analysis, in conjunction with a rigorous Green function method. The scattering channel limit is universal for arbitrary spatial mode multiplexing, which is launched by a planar electromagnetic device, such as antenna, metasurface, etc, with a predefined physical size. As a proof of concept, we demonstrate both theoretically and experimentally the limit by a metasurface hologram that transforms orthogonal OAM modes to plane-wave modes scattered at critically separated angular-spectral regions. Particularly, a minimax optimization algorithm is applied to suppress angular spectrum aliasing, achieving good performances in both full-wave simulation and experimental measurement at microwave frequencies. This work offers a theoretical upper bound and corresponding approach route for engineering designs of OAM multiplexing.
△ Less
Submitted 1 January, 2022; v1 submitted 29 June, 2021;
originally announced June 2021.
-
Loss Mechanism Analyses of Perovskite Solar Cells with an Equivalent Circuit Model
Authors:
Ting Xu,
Zi-Shuai Wang,
Xuan-Hua Li,
Wei E. I. Sha
Abstract:
Understanding and quantifying the main loss factors affecting the power conversion efficiency of perovskite solar cells are urgently needed. In this work, based on semiconductor physics, the expressions of bulk and surface recombination currents are analytically derived. Then taking the optical loss, series and shunt resistance losses, and bulk and surface recombination losses into consideration,…
▽ More
Understanding and quantifying the main loss factors affecting the power conversion efficiency of perovskite solar cells are urgently needed. In this work, based on semiconductor physics, the expressions of bulk and surface recombination currents are analytically derived. Then taking the optical loss, series and shunt resistance losses, and bulk and surface recombination losses into consideration, an equivalent circuit model is proposed to describe the current density-voltage characteristics of practical perovskite solar cells. Furthermore, by comparing to the drift-diffusion model, the pre-defined physical parameters of the drift-diffusion model well agree with the fitting parameters retrieved by the equivalent circuit model, which verifies the reliability of the proposed model. Moreover, when the circuit model is applied to analyze experimental results, the fitting outcomes show favorable consistency to the physical investigations offered by the experiments. And the relative fitting errors of the above cases are all less than 2%. Through employing the model, the dominant recombination type is clearly identified and split current density-voltage curves characterizing different loss mechanisms are offered, which intuitively reveals the physical principles of efficiency loss. Additionally, through calculating the efficiency loss ratios under the open-circuit voltage condition, quantifying the above-mentioned loss mechanisms becomes simple and compelling. Consequently, this model offers a guideline to approach the efficiency limit from a circuit-level perspective. And the model is a comprehensive simulation and analysis tool for understanding the device physics of perovskite solar cells.
△ Less
Submitted 20 March, 2021;
originally announced March 2021.
-
Manipulation of Orbital Angular Momentum Spectrum Using Shape-Tailored Metasurfaces
Authors:
Ling-Jun Yang,
Sheng Sun,
Wei E. I. Sha
Abstract:
Vortex beams carrying orbital angular momentum (OAM) have been widely applied in various electromagnetic, optical, and quantum systems. A tailored OAM spectrum composed of several specific modes as expected holds a promise for expanding the degrees of freedom of the systems. However, such a broadband high-purity tailored spectrum is difficult to be achieved by the present devices, where the broadb…
▽ More
Vortex beams carrying orbital angular momentum (OAM) have been widely applied in various electromagnetic, optical, and quantum systems. A tailored OAM spectrum composed of several specific modes as expected holds a promise for expanding the degrees of freedom of the systems. However, such a broadband high-purity tailored spectrum is difficult to be achieved by the present devices, where the broadband amplitude manipulation has not been explored yet. In this work, inspired by the envelope-modulation theory, an elegant and universal way to manipulate the OAM spectrum in wide bandwidth is proposed by using a shape-tailored metasurface. Firstly, the rotating meta-atoms on a triangular lattice are proved to have smaller coupling distortion than that on a square lattice, and this behavior is critical for high-purity vortex spectrum generation by the Pancharatnam-Berry-based metasurfaces. Secondly, a universal modulation relation is established between the spatial arrangement of metasurfaces and the generated vortex beams. Finally, the broadband modulated OAM spectra and the comb-like OAM spectra are theoretically and experimentally demonstrated by the shape-tailored metasurfaces. The proposed amplitude-modulation scheme offers a novel concept and engineering route to manipulate the OAM spectrum in wide bandwidth, which could promote the development of OAM-based applications.
△ Less
Submitted 26 January, 2021;
originally announced March 2021.
-
Coupled cavity-waveguide system based on topological corner state and edge state
Authors:
Aoqian Shi,
Bei Yan,
Rui Ge,
Jianlan Xie,
Yuchen Peng,
Hang Li,
Wei E. I. Sha,
Jianjun Liu
Abstract:
Topological corner state (TCS) and topological edge state (TES) have provided new approaches to control the propagation of light. The construction of topological coupled cavity-waveguide system (TCCWS) based on TCS and TES is worth looking forward to, due to its research prospects in realizing high-performance micro-nano integrated photonic devices. In this Letter, TCCWS is proposed in two-dimensi…
▽ More
Topological corner state (TCS) and topological edge state (TES) have provided new approaches to control the propagation of light. The construction of topological coupled cavity-waveguide system (TCCWS) based on TCS and TES is worth looking forward to, due to its research prospects in realizing high-performance micro-nano integrated photonic devices. In this Letter, TCCWS is proposed in two-dimensional (2D) photonic crystal (PC), which possesses strong optical localization, high quality factor and excellent robustness compared with the conventional coupled cavity-waveguide system (CCCWS). This work will provide the possibility to design high-performance logic gates, lasers, filters and other micro-nano integrated photonics devices and expand their applications.
△ Less
Submitted 4 January, 2021; v1 submitted 26 December, 2020;
originally announced December 2020.
-
Coexistence of pseudospin- and valley-Hall-like edge states in a photonic crystal with $C_{3v}$ symmetry
Authors:
Menglin L. N. Chen,
Li Jun Jiang,
Zhihao Lan,
Wei E. I. Sha
Abstract:
We demonstrate the coexistence of pseudospin- and valley-Hall-like edge states in a photonic crystal with $C_{3v}$ symmetry, which is composed of three interlacing triangular sublattices with the same lattice constants. By tuning the geometry of the sublattices, three complete photonic band gaps with nontrivial topology can be created, one of which is due to the band inversion associated with the…
▽ More
We demonstrate the coexistence of pseudospin- and valley-Hall-like edge states in a photonic crystal with $C_{3v}$ symmetry, which is composed of three interlacing triangular sublattices with the same lattice constants. By tuning the geometry of the sublattices, three complete photonic band gaps with nontrivial topology can be created, one of which is due to the band inversion associated with the pseudospin degree of freedom at the $Γ$ point and the other two due to the gapping out of Dirac cones associated with the valley degree of freedom at the $K, K'$ points. The system can support tri-band pseudospin- and valley-momentum locking edge states at properly designed domain-wall interfaces. Furthermore, to demonstrate the novel interplay of the two kinds of edge states in a single configuration, we design a four-channel system, where the unidirectional routing of electromagnetic waves against sharp bends between two routes can be selectively controlled by the pseudospin and valley degrees of freedom. Our work combines the pseudospin and valley degrees of freedom in a single configuration and may provide more flexibility in manipulating electromagnetic waves with promising potential for multiband and multifunctional applications.
△ Less
Submitted 3 November, 2020;
originally announced November 2020.
-
Multiplexing-oriented plasmon-MoS2 hybrid metasurfaces driven by nonlinear quasi bound states in the continuum
Authors:
Qun Ren,
Feng Feng,
Xiang Yao,
Quan Xu,
Zhihao Lan,
Jianwei You,
Xiaofei Xiao,
Wei E. I. Sha,
Ming Xin
Abstract:
Rapid progress in nonlinear plasmonic metasurfaces enabled many novel optical characteristics for metasurfaces, with potential applications in frequency metrology, timing characterization and quantum information. However, the spectrum of nonlinear optical response was typically based upon the linear optical resonance. In this work, a wavelength-multiplexed nonlinear plasmon-MoS2 hybrid metasurface…
▽ More
Rapid progress in nonlinear plasmonic metasurfaces enabled many novel optical characteristics for metasurfaces, with potential applications in frequency metrology, timing characterization and quantum information. However, the spectrum of nonlinear optical response was typically based upon the linear optical resonance. In this work, a wavelength-multiplexed nonlinear plasmon-MoS2 hybrid metasurface with suppression phenomenon was proposed, where multiple nonlinear signals could to be simultaneously processed and optionally tuned. A clear physical picture to depict the nonlinear plasmonic bound states in the continuum (BICs) was presented, from the perspective of both classical and quantum approaches. Particularly, beyond the ordinary plasmon-polariton effect, we numerically demonstrated a giant BIC-inspired second-order nonlinear susceptibility $10^{-5}$~$m/V$ of MoS2 in the infrared band. The novelty in our study lies in the presence of a quantum oscillator that can be adopted to both suppress and enhance the nonlinear quasi BICs. This selectable nonlinear BIC-based suppression and enhancement effect can optionally block undesired modes, resulting in narrower linewidth as well as smaller quantum decay rates, which is also promising in slow-light-associated technologies.
△ Less
Submitted 11 November, 2020; v1 submitted 25 August, 2020;
originally announced August 2020.
-
Second-harmonic generation via double topological valley-Hall kink modes in all-dielectric photonic crystals
Authors:
Zhihao Lan,
Jian Wei You,
Qun Ren,
Wei E. I. Sha,
Nicolae C. Panoiu
Abstract:
Nonlinear topological photonics, which explores topics common to the fields of topological phases and nonlinear optics, is expected to open up a new paradigm in topological photonics. Here, we demonstrate second-harmonic generation (SHG) via nonlinear interaction of double topological valley-Hall kink modes in all-dielectric photonic crystals (PhCs). We first show that two topological frequency ba…
▽ More
Nonlinear topological photonics, which explores topics common to the fields of topological phases and nonlinear optics, is expected to open up a new paradigm in topological photonics. Here, we demonstrate second-harmonic generation (SHG) via nonlinear interaction of double topological valley-Hall kink modes in all-dielectric photonic crystals (PhCs). We first show that two topological frequency bandgaps can be created around a pair of frequencies, $ω_0$ and $2ω_0$, by gapping out the corresponding Dirac points in two-dimensional honeycomb PhCs. Valley-Hall kink modes along a kink-type domain wall interface between two PhCs placed together in a mirror-symmetric manner are generated within the two frequency bandgaps. Importantly, through full-wave simulations and mode dispersion analysis, we demonstrate that tunable, bi-directional phase-matched SHG via nonlinear interaction of the valley-Hall kink modes inside the two bandgaps can be achieved. In particular, by using Stokes parameters associated to the magnetic part of the valley-Hall kink modes, we introduce a new concept, SHG directional dichroism, which is employed to characterize optical probes for sensing chiral molecules. Our work opens up new avenues towards topologically protected nonlinear frequency mixing and active photonic devices implemented in all-dielectric material platforms.
△ Less
Submitted 7 April, 2021; v1 submitted 9 July, 2020;
originally announced July 2020.
-
Local orbital-angular-momentum dependent surface states with topological protection
Authors:
Menglin L. N. Chen,
Li Jun Jiang,
Zhihao Lan,
Wei E. I. Sha
Abstract:
Chiral surface states along the zigzag edge of a valley photonic crystal in the honeycomb lattice are demonstrated. By decomposing the local fields into orbital angular momentum (OAM) modes, we find that the chiral surface states present OAM-dependent unidirectional propagation characteristics. Particularly, the propagation directivities of the surface states are quantified by the local OAM decomp…
▽ More
Chiral surface states along the zigzag edge of a valley photonic crystal in the honeycomb lattice are demonstrated. By decomposing the local fields into orbital angular momentum (OAM) modes, we find that the chiral surface states present OAM-dependent unidirectional propagation characteristics. Particularly, the propagation directivities of the surface states are quantified by the local OAM decomposition and are found to depend on the chiralities of both the source and surface states. These findings allow for the engineering control of the unidirectional propagation of electromagnetic energy without requiring an ancillary cladding layer. Furthermore, we examine the propagation of the chiral surface states against sharp bends. It turns out that although only certain states successfully pass through the bend, the unidirectional propagation is well maintained due to the topology of the structure.
△ Less
Submitted 11 May, 2020;
originally announced May 2020.
-
First-principle calculation of Chern number in gyrotropic photonic crystals
Authors:
Ran Zhao,
Guo-Da Xie,
Menglin L. N. Chen,
Zhihao Lan,
Zhixiang Huang,
Wei E. I. Sha
Abstract:
As an important figure of merit for characterizing the quantized collective behaviors of the wavefunction, Chern number is the topological invariant of quantum Hall insulators. Chern number also identifies the topological properties of the photonic topological insulators (PTIs), thus it is of crucial importance in PTI design. In this paper, we develop a first principle computatioal method for the…
▽ More
As an important figure of merit for characterizing the quantized collective behaviors of the wavefunction, Chern number is the topological invariant of quantum Hall insulators. Chern number also identifies the topological properties of the photonic topological insulators (PTIs), thus it is of crucial importance in PTI design. In this paper, we develop a first principle computatioal method for the Chern number of 2D gyrotropic photonic crystals (PCs), starting from the Maxwell's equations. Firstly, we solve the Hermitian generalized eigenvalue equation reformulated from the Maxwell's equations by using the full-wave finite-difference frequency-domain (FDFD) method. Then the Chern number is obtained by calculating the integral of Berry curvature over the first Brillouin zone. Numerical examples of both transverse-electric (TE) and transverse-magnetic (TM) modes are demonstrated, where convergent Chern numbers can be obtained using rather coarse grids, thus validating the efficiency and accuracy of the proposed method.
△ Less
Submitted 24 January, 2020;
originally announced January 2020.
-
Ultra-wideband Reflection-type Metasurface for Generating Integer and Fractional Orbital Angular Momentum
Authors:
Ling-Jun Yang,
Sheng Sun,
Wei E. I. Sha
Abstract:
Vortex beams carrying orbital angular momentum are extensively studied owing to its potential to expand channel capacity of microwave and optical communication. By utilizing the Pancharatnam-Berry phase concept, an ultra-wideband single layer metasurface is proposed to realize the conversion from incident plane waves to reflected vortex beams covering a considerable bandwidth from 6.75 to 21.85 GH…
▽ More
Vortex beams carrying orbital angular momentum are extensively studied owing to its potential to expand channel capacity of microwave and optical communication. By utilizing the Pancharatnam-Berry phase concept, an ultra-wideband single layer metasurface is proposed to realize the conversion from incident plane waves to reflected vortex beams covering a considerable bandwidth from 6.75 to 21.85 GHz . An equivalent circuit model combined with broadband phase shift network is developed to effectively design the meta-atoms in metasurface. It is the first time to design wideband metasurfaces with the phase-based characteristics. To verify the proposed model, some deformed square loop meta-atoms are proposed to construct the metasurfaces with broadband OAM characteristic. Moreover, the vortex beams with the integer (l = -3), fractional (l = -1.5), and high-order (l = -10) OAM mode are generated respectively. Based on an OAM spectral analysis, the mode purity of the generated vortex waves is discussed in detail. The experimental results achieve a good agreement with those obtained from the simulation, thus proving the effectiveness and practicability of the proposed method.
△ Less
Submitted 4 November, 2019;
originally announced November 2019.
-
Pseudospin-Polarized Topological Line Defects in Dielectric Photonic Crystals
Authors:
Menglin L. N. Chen,
Li Jun Jiang,
Zhihao Lan,
Wei E. I. Sha
Abstract:
Electromagnetic topological insulators have been explored extensively due to the robust edge states they support. In this work, we propose a topological electromagnetic system based on a line defect in topologically nontrivial photonic crystals (PCs). With a finite-difference supercell approach, modal analysis of the PCs structure is investigated in detail. The topological line-defect states are p…
▽ More
Electromagnetic topological insulators have been explored extensively due to the robust edge states they support. In this work, we propose a topological electromagnetic system based on a line defect in topologically nontrivial photonic crystals (PCs). With a finite-difference supercell approach, modal analysis of the PCs structure is investigated in detail. The topological line-defect states are pseudospin polarized and their energy flow directions are determined by the corresponding pseudospin helicities. These states can be excited by using two spatially-symmetric line-source arrays carrying orbital angular momenta. The feature of the unidirectional propagation is demonstrated and it is stable when disorders are introduced to the PCs structure.
△ Less
Submitted 25 August, 2019; v1 submitted 10 July, 2019;
originally announced July 2019.
-
Simulating Maxwell-Schrödinger Equations by High-Order Symplectic FDTD Algorithm
Authors:
Guoda Xie,
Zhixiang Huang,
Ming Fang,
Wei E. I. Sha
Abstract:
A novel symplectic algorithm is proposed to solve the Maxwell-Schrödinger (M-S) system for investigating light-matter interaction. Using the fourth-order symplectic integration and fourth-order collocated differences, Maxwell-Schrödinger equations are discretized in temporal and spatial domains, respectively. The symplectic finite-difference time-domain (SFDTD) algorithm is developed for accurate…
▽ More
A novel symplectic algorithm is proposed to solve the Maxwell-Schrödinger (M-S) system for investigating light-matter interaction. Using the fourth-order symplectic integration and fourth-order collocated differences, Maxwell-Schrödinger equations are discretized in temporal and spatial domains, respectively. The symplectic finite-difference time-domain (SFDTD) algorithm is developed for accurate and efficient study of coherent interaction between electromagnetic fields and artificial atoms. Particularly, the Dirichlet boundary condition is adopted for modeling the Rabi oscillation problems under the semi-classical framework. To implement the Dirichlet boundary condition, image theory is introduced, tailored to the high-order collocated differences. For validating the proposed SFDTD algorithm, three-dimensional numerical studies of the population inversion in the Rabi oscillation are presented. Numerical results show that the proposed high-order SFDTD(4,4) algorithm exhibits better numerical performance than the conventional FDTD(2,2) approach at the aspects of accuracy and efficiency for the long-term simulation. The proposed algorithm opens up a promising way towards a high-accurate energy-conservation modeling and simulation of complex dynamics in nanoscale light-matter interaction.
△ Less
Submitted 23 June, 2019;
originally announced June 2019.
-
Quasi-Continuous Metasurfaces for Orbital Angular Momentum Generation
Authors:
Menglin L. N. Chen,
Li Jun Jiang,
Wei E. I. Sha
Abstract:
A quasi-continuous composite perfect electric conductor-perfect magnetic conductor metasurface and a systematic metasurface design process are proposed for the orbital angular momentum (OAM) generation. The metasurfaces reflect the incident left circularly polarized (LCP)/right circularly polarized (RCP) plane wave to RCP/LCP vortex beams carrying OAM at normal or oblique direction. Unlike convent…
▽ More
A quasi-continuous composite perfect electric conductor-perfect magnetic conductor metasurface and a systematic metasurface design process are proposed for the orbital angular momentum (OAM) generation. The metasurfaces reflect the incident left circularly polarized (LCP)/right circularly polarized (RCP) plane wave to RCP/LCP vortex beams carrying OAM at normal or oblique direction. Unlike conventional metasurfaces that are composed of discrete scatterers, the scatterers on the proposed metasurface form a quasi-continuous pattern. The patterning of the metasurface is calculated through grating vectors, and no optimization of single scatterer is required. Furthermore, the distortions from local-response discontinuity of discrete scatterers are avoided. This letter provides great convenience to high-quality OAM generation.
△ Less
Submitted 4 March, 2019;
originally announced March 2019.
-
Nonlinearity in the Dark: Broadband Terahertz Generation with Extremely High Efficiency
Authors:
Ming Fang,
Nian-Hai Shen,
Wei E. I. Sha,
Zhixiang Huang,
Thomas Koschny,
Costas M. Soukouli
Abstract:
Plasmonic metamaterials and metasurfaces offer new opportunities in developing high performance terahertz emitters and detectors beyond the limitations of conventional nonlinear materials. However, simple meta-atoms for second-order nonlinear applications encounter fundamental trade-offs in the necessary symmetry breaking and local-field enhancement due to radiation damping that is inherent to the…
▽ More
Plasmonic metamaterials and metasurfaces offer new opportunities in developing high performance terahertz emitters and detectors beyond the limitations of conventional nonlinear materials. However, simple meta-atoms for second-order nonlinear applications encounter fundamental trade-offs in the necessary symmetry breaking and local-field enhancement due to radiation damping that is inherent to the operating resonant mode and cannot be controlled separately. Here we present a novel concept that eliminates this restriction obstructing the improvement of terahertz generation efficiency in nonlinear metasurfaces based on metallic nanoresonators. This is achieved by combining a resonant dark-state metasurface, which locally drives nonlinear nanoresonators in the near field, with a specific spatial symmetry that enables destructive interference of the radiating linear moments of the nanoresonators, and perfect absorption via simultaneous electric and magnetic critical coupling of the pump radiation to the dark mode. Our proposal allows eliminating linear radiation damping, while maintaining constructive interference and effective radiation of the nonlinear components. We numerically demonstrate a giant second-order nonlinear susceptibility around Hundred-Billionth m/V, a one order improvement compared with the previously reported split-ring-resonator metasurface, and correspondingly, a 2 orders of magnitude enhanced terahertz energy extraction should be expected with our configuration under the same conditions. Our study offers a paradigm of high efficiency tunable nonlinear metadevices and paves the way to revolutionary terahertz technologies and optoelectronic nanocircuitry.
△ Less
Submitted 19 January, 2019;
originally announced January 2019.
-
Investigating Thermal Cooling Mechanisms of Human Body Under Exposure to Electromagnetic Radiation
Authors:
Huan Huan Zhang,
Ying Liu,
Xiaoyan Y. Z. Xiong,
Guang Ming Shi,
Chun Yang Wang,
Wei E. I. Sha
Abstract:
Thermal cooling mechanisms of human exposed to electromagnetic (EM) radiation are studied in detail. The electromagnetic and thermal co-simulation method is utilized to calculate the electromagnetic and temperature distributions. Moreover, Pennes' bioheat equation is solved to understand different thermal cooling mechanisms including blood flow, convective cooling and radiative cooling separately…
▽ More
Thermal cooling mechanisms of human exposed to electromagnetic (EM) radiation are studied in detail. The electromagnetic and thermal co-simulation method is utilized to calculate the electromagnetic and temperature distributions. Moreover, Pennes' bioheat equation is solved to understand different thermal cooling mechanisms including blood flow, convective cooling and radiative cooling separately or jointly. Numerical results demonstrate the characteristics and functions for each cooling mechanism. Different from the traditional view that the cooling effect of blood is usually reflected by its influence on sweat secretion and evaporation, our study indicates that the blood flow itself is an important factor of thermal cooling especially for high-intensity EM radiation. This work contributes to fundamental understanding of thermal cooling mechanisms of human.
△ Less
Submitted 10 January, 2019;
originally announced January 2019.
-
Graphene based functional devices: A short review
Authors:
Rong Wang,
Xingang Ren,
Ze Yan,
Lijun Jiang,
Wei E. I. Sha,
Guangcun Shan
Abstract:
Graphene is an ideal 2D material system bridging electronic and photonic devices. It also breaks the fundamental speed and size limits by electronics and photonics, respectively. Graphene offers multiple functions of signal transmission, emission, modulation, and detection in a broad band, high speed, compact size, and low loss. Here, we have a brief view of graphene based functional devices at mi…
▽ More
Graphene is an ideal 2D material system bridging electronic and photonic devices. It also breaks the fundamental speed and size limits by electronics and photonics, respectively. Graphene offers multiple functions of signal transmission, emission, modulation, and detection in a broad band, high speed, compact size, and low loss. Here, we have a brief view of graphene based functional devices at microwave, terahertz, and optical frequencies. Their fundamental physics and computational models were discussed as well.
△ Less
Submitted 18 October, 2018; v1 submitted 17 October, 2018;
originally announced October 2018.
-
Efficient Volumetric Method of Moments for Modeling Plasmonic Thin-Film Solar Cells with Periodic Structures
Authors:
Zi He,
Ji Hong Gu,
Wei E. I. Sha,
Ru Shan Chen
Abstract:
Metallic nanoparticles (NPs) support localized surface plasmon resonances (LSPRs), which enable to concentrate sunlight at the active layer of solar cells. However, full-wave modeling of the plasmonic solar cells faces great challenges in terms of huge computational workload and bad matrix condition. It is tremendously difficult to accurately and efficiently simulate near-field multiple scattering…
▽ More
Metallic nanoparticles (NPs) support localized surface plasmon resonances (LSPRs), which enable to concentrate sunlight at the active layer of solar cells. However, full-wave modeling of the plasmonic solar cells faces great challenges in terms of huge computational workload and bad matrix condition. It is tremendously difficult to accurately and efficiently simulate near-field multiple scattering effects from plasmonic NPs embedded into solar cells. In this work, a preconditioned volume integral equation (VIE) is proposed to model plasmonic organic solar cells (OSCs). The diagonal block preconditioner is applied to different material domains of the device structure. As a result, better convergence and higher computing efficiency are achieved. Moreover, the calculation is further accelerated by two-dimensional periodic Green's functions. Using the proposed method, the dependences of optical absorption on the wavelengths and incident angles are investigated. Angular responses of the plasmonic OSCs show the super-Lambertian absorption on the plasmon resonance but near-Lambertian absorption off the plasmon resonance. The volumetric method of moments and explored physical understanding are of great help to investigate the optical responses of OSCs.
△ Less
Submitted 14 September, 2018;
originally announced September 2018.
-
Generation of Orbital Angular Momentum by a Point Defect in Photonic Crystals
Authors:
Menglin L. N. Chen,
Li Jun Jiang,
Wei E. I. Sha
Abstract:
As an attractive degree of freedom in electromagnetic (EM) waves, the orbital angular momentum (OAM) enables infinite communication channels for both classical and quantum communications. The exploration of OAM generation inspires various designs involving spiral phase plates, antenna arrays, metasurfaces, and computer-generated holograms. In this work, we theoretically and experimentally demonstr…
▽ More
As an attractive degree of freedom in electromagnetic (EM) waves, the orbital angular momentum (OAM) enables infinite communication channels for both classical and quantum communications. The exploration of OAM generation inspires various designs involving spiral phase plates, antenna arrays, metasurfaces, and computer-generated holograms. In this work, we theoretically and experimentally demonstrate an approach to producing OAM carrying EM waves by a point defect in three-dimensional (3D) photonic crystals (PCs). Simultaneous excitation of two vibrational-defect states with an elaborately engineered phase retardation generates a rotational state carrying OAM. Through converting guided waves in a line defect to localized waves in a point defect and then to radiated vortex waves in free space, the lowest four OAM-mode emitters, i.e., OAM indices of 1, -1, 2, and -2, are successfully realized. This work offers a physical mechanism to generate OAM by PCs, especially when the OAM generation is to be integrated with other designs.
△ Less
Submitted 20 August, 2018;
originally announced August 2018.
-
Investigation of broadband terahertz generation from metasurface
Authors:
Ming Fang,
Kaikun Niu,
Zhiaxiang Huang,
Wei E. I. Sha,
Xianliang Wu,
Thomas Koschny,
Costas M. Soukoulis
Abstract:
The nonlinear metamaterials have been shown to provide nonlinear properties with high nonlinear conversion efficiency and in a myriad of light manipulation. Here we study terahertz generation from nonlinear metasurface consisting of single layer nanoscale split-ring resonator array. The terahertz generation due to optical rectification by the second-order nonlinearity of the split-ring resonator i…
▽ More
The nonlinear metamaterials have been shown to provide nonlinear properties with high nonlinear conversion efficiency and in a myriad of light manipulation. Here we study terahertz generation from nonlinear metasurface consisting of single layer nanoscale split-ring resonator array. The terahertz generation due to optical rectification by the second-order nonlinearity of the split-ring resonator is investigated by a time-domain implementation of the hydrodynamic model for electron dynamics in metal. The results show that the nonlinear metasurface enables us to generate broadband terahertz radiation and free from quasi-phase-matching conditions. The proposed scheme provides a new concept of broadband THz source and designing nonlinear plasmonic metamaterials.
△ Less
Submitted 3 June, 2018;
originally announced June 2018.
-
Symplectic Pseudospectral Time-Domain Scheme for Solving Time-Dependent Schrodinger Equation
Authors:
Jing Shen,
Wei E. I. Sha,
Xiaojing Kuang,
Jinhua Hu,
Zhixiang Huang,
Xianliang Wu
Abstract:
A symplectic pseudospectral time-domain (SPSTD) scheme is developed to solve Schrodinger equation. Instead of spatial finite differences in conventional finite-difference time-domain (FDTD) method, the fast Fourier transform is used to calculate the spatial derivatives. In time domain, the scheme adopts high-order symplectic integrators to simulate time evolution of Schrodinger equation. A detaile…
▽ More
A symplectic pseudospectral time-domain (SPSTD) scheme is developed to solve Schrodinger equation. Instead of spatial finite differences in conventional finite-difference time-domain (FDTD) method, the fast Fourier transform is used to calculate the spatial derivatives. In time domain, the scheme adopts high-order symplectic integrators to simulate time evolution of Schrodinger equation. A detailed numerical study on the eigenvalue problems of 1D quantum well and 3D harmonic oscillator is carried out. The simulation results strongly confirm the advantages of the SPSTD scheme over the traditional PSTD method and FDTD approach. Furthermore, by comparing to the traditional PSTD method and the non-symplectic Runge-Kutta (RK) method, the explicit SPSTD scheme which is an infinite order of accuracy in space domain and energy-conserving in time domain, is well suited for a long-term simulation.
△ Less
Submitted 8 May, 2018;
originally announced May 2018.
-
The Effects of Interfacial Recombination and Injection Barrier on the Electrical Characteristics of Perovskite Solar Cells
Authors:
Lin Xing Shi,
Zi Shuai Wang,
Zengguang Huang,
Wei E. I. Sha,
Haoran Wang,
Zhen Zhou
Abstract:
Charge carrier recombination in the perovskite solar cells (PSCs) has a deep influence on the electrical performance, such as open circuit voltage, short circuit current, fill factor and ultimately power conversion efficiency. The impacts of injection barrier, recombination channels, doping properties of carrier transport layers and light intensity on the performance of PSCs are theoretically inve…
▽ More
Charge carrier recombination in the perovskite solar cells (PSCs) has a deep influence on the electrical performance, such as open circuit voltage, short circuit current, fill factor and ultimately power conversion efficiency. The impacts of injection barrier, recombination channels, doping properties of carrier transport layers and light intensity on the performance of PSCs are theoretically investigated by drift-diffusion model in this work. The results indicate that due to the injection barrier at the interfaces of perovskite and carrier transport layer, the accumulated carriers modify the electric field distribution throughout the PSCs. Thus, a zero electric field is generated at a specific applied voltage, with greatly increases the interfacial recombination, resulting in a local kink of current density-voltage (J-V) curve. This work provides an effective strategy to improve the efficiency of PSCs by pertinently reducing both the injection barrier and interfacial recombination.
△ Less
Submitted 26 March, 2018;
originally announced March 2018.
-
Electrically Tunable Polarizer Based on Graphene-loaded Plasmonic Cross Antenna
Authors:
Yuwei Qin,
Xiaoyan Y. Z. Xiong,
Wei E. I. Sha,
Li Jun Jiang
Abstract:
The unique gate-voltage dependent optical properties of graphene make it a promising electrically-tunable plasmonic material. In this work, we proposed in-situ control of the polarization of nanoantennas by combining plasmonic structures with an electrostatically tunable graphene monolayer. The tunable polarizer is designed based on an asymmetric cross nanoantenna comprising two orthogonal metalli…
▽ More
The unique gate-voltage dependent optical properties of graphene make it a promising electrically-tunable plasmonic material. In this work, we proposed in-situ control of the polarization of nanoantennas by combining plasmonic structures with an electrostatically tunable graphene monolayer. The tunable polarizer is designed based on an asymmetric cross nanoantenna comprising two orthogonal metallic dipoles sharing the same feed gap. Graphene monolayer is deposited on a Si/SiO2 substrate, and inserted beneath the nanoantenna. Our modelling demonstrates that as the chemical potential is incremented up to 1 eV by electrostatic doping, resonant wavelength for the longer graphene-loaded dipole is blue shifted for 500 nm (~ 10% of the resonance) in the mid-infrared range, whereas the shorter dipole experiences much smaller influences due to the unique wavelength-dependent optical properties of graphene. In this way, the relative field amplitude and phase between the two dipole nanoantennas are electrically adjusted, and the polarization state of the reflected wave can be electrically tuned from the circular into near-linear states with the axial ratio changing over 8 dB. Our study thus confirms the strong light-graphene interaction with metallic nanostructures, and illuminates promises for high-speed electrically controllable optoelectronic devices.
△ Less
Submitted 22 March, 2018;
originally announced March 2018.
-
Orbital Angular Momentum Generation and Detection by Geometric-Phase Based Metasurfaces
Authors:
Menglin L. N. Chen,
Li Jun Jiang,
Wei E. I. Sha
Abstract:
We present a comprehensive review on the geometric-phase based metasurfaces for orbital angular momentum(OAM) generation and detection. These metasurfaces manipulate the electromagnetic (EM) wave by introducing abrupt phase change, which is strongly dependent on the polarization state of incident EM wave and can be interpreted by geometric phase. Hence, the conventional bulk devices that based on…
▽ More
We present a comprehensive review on the geometric-phase based metasurfaces for orbital angular momentum(OAM) generation and detection. These metasurfaces manipulate the electromagnetic (EM) wave by introducing abrupt phase change, which is strongly dependent on the polarization state of incident EM wave and can be interpreted by geometric phase. Hence, the conventional bulk devices that based on the accumulated phase change along the optical path can be avoided.
△ Less
Submitted 9 March, 2018;
originally announced March 2018.
-
Hole Mobility Model for Si Double-Gate Junctionless Transistors
Authors:
Fan Chen,
Kangliang Wei,
Wei E. I. Sha,
Jun Z. Huang
Abstract:
In this work, a physics based model is developed to calculate the hole mobility of ultra-thin-body double-gate junctionless transistors. Six-band $k\cdot p$ Schrödinger equation and Poisson equation are solved self-consistently. The obtained wave-functions and energies are stored in look-up tables. Hole mobility can be derived using the Kubo-Greenwood formula accounting for impurity, acoustic and…
▽ More
In this work, a physics based model is developed to calculate the hole mobility of ultra-thin-body double-gate junctionless transistors. Six-band $k\cdot p$ Schrödinger equation and Poisson equation are solved self-consistently. The obtained wave-functions and energies are stored in look-up tables. Hole mobility can be derived using the Kubo-Greenwood formula accounting for impurity, acoustic and optical phonon, and surface roughness scattering. Initial benchmark results are shown.
△ Less
Submitted 17 November, 2017;
originally announced January 2018.
-
Quantifying Efficiency Loss of Perovskite Solar Cells by a Modified Detailed Balance Model
Authors:
Wei E. I. Sha,
Hong Zhang,
Zi Shuai Wang,
Hugh L. Zhu,
Xingang Ren,
Francis Lin,
Alex K. -Y. Jen,
Wallace C. H. Choy
Abstract:
A modified detailed balance model is built to understand and quantify efficiency loss of perovskite solar cells. The modified model captures the light-absorption dependent short-circuit current, contact and transport-layer modified carrier transport, as well as recombination and photon-recycling influenced open-circuit voltage. Our theoretical and experimental results show that for experimentally…
▽ More
A modified detailed balance model is built to understand and quantify efficiency loss of perovskite solar cells. The modified model captures the light-absorption dependent short-circuit current, contact and transport-layer modified carrier transport, as well as recombination and photon-recycling influenced open-circuit voltage. Our theoretical and experimental results show that for experimentally optimized perovskite solar cells with the power conversion efficiency of 19%, optical loss of 25%, non-radiative recombination loss of 35%, and ohmic loss of 35% are the three dominant loss factors for approaching the 31% efficiency limit of perovskite solar cells. We also find that the optical loss will climb up to 40% for a thin-active-layer design. Moreover, a misconfigured transport layer will introduce above 15% of energy loss. Finally, the perovskite-interface induced surface recombination, ohmic loss, and current leakage should be further reduced to upgrade device efficiency and eliminate hysteresis effect. The work contributes to fundamental understanding of device physics of perovskite solar cells. The developed model offers a systematic design and analysis tool to photovoltaic science and technology.
△ Less
Submitted 9 January, 2018;
originally announced January 2018.
-
Detection of Orbital Angular Momentum with Metasurface at Microwave Band
Authors:
Menglin L. N. Chen,
Li Jun Jiang,
Wei E. I. Sha
Abstract:
An orbital angular momentum (OAM) detection approach at microwave band is proposed. A transmittance function is exploited to model a transmissive metasurface. Then the metasurface is designed to convert an OAM wave to multiple waves, only one of which is gaussian. The radiation direction of the gaussian wave is distinguishable according to the order of incident OAM. Consequently, by locating the g…
▽ More
An orbital angular momentum (OAM) detection approach at microwave band is proposed. A transmittance function is exploited to model a transmissive metasurface. Then the metasurface is designed to convert an OAM wave to multiple waves, only one of which is gaussian. The radiation direction of the gaussian wave is distinguishable according to the order of incident OAM. Consequently, by locating the gaussian wave, the incident OAM can be conveniently determined. We use a simple field source to simulate the incident OAM wave in fullwave simulation. It largely simplifies the simulation process when an incident wave carrying OAM is needed. Both numerical and full-wave simulation results are provided to validate our design and they show a good agreement with each other. Then, the metasurface is optimized for high directivity. Our work can provide an efficient and effective way for OAM detection in radio communications.
△ Less
Submitted 1 December, 2017;
originally announced December 2017.
-
Maxwell-Hydrodynamic Model for Simulating Nonlinear Terahertz Generation from Plasmonic Metasurfaces
Authors:
Ming Fang,
Zhixiang Huang,
Wei E. I. Sha,
Xianliang Wu
Abstract:
The interaction between the electromagnetic field and plasmonic nanostructures leads to both the strong linear response and inherent nonlinear behavior. In this paper, a time-domain hydrodynamic model for describing the motion of electrons in plasmonic nanostructures is presented, in which both surface and bulk contributions of nonlinearity are considered. A coupled Maxwell-hydrodynamic system cap…
▽ More
The interaction between the electromagnetic field and plasmonic nanostructures leads to both the strong linear response and inherent nonlinear behavior. In this paper, a time-domain hydrodynamic model for describing the motion of electrons in plasmonic nanostructures is presented, in which both surface and bulk contributions of nonlinearity are considered. A coupled Maxwell-hydrodynamic system capturing full-wave physics and free electron dynamics is numerically solved with the parallel finite-difference time-domain (FDTD) method. The validation of the proposed method is presented to simulate linear and nonlinear responses from a plasmonic metasurface. The linear response is compared with the Drude dispersion model and the nonlinear terahertz emission from a difference-frequency generation process is validated with theoretical analyses. The proposed scheme is fundamentally important to design nonlinear plasmonic nanodevices, especially for efficient and broadband THz emitters.
△ Less
Submitted 17 September, 2017;
originally announced September 2017.
-
Mixing of spin and orbital angular momenta via second-harmonic generation in plasmonic and dielectric chiral nanostructures
Authors:
Xiaoyan Y. Z. Xiong,
Ahmed Al-Jarro,
Li Jun Jiang,
Nicolae C. Panoiu,
Wei E. I. Sha
Abstract:
We present a theoretical study of the characteristics of the nonlinear spin-orbital angular momentum coupling induced by second-harmonic generation in plasmonic and dielectric nanostructures made of centrosymmetric materials. In particular, the connection between the phase singularities and polarization helicities in the longitudinal components of the fundamental and second-harmonic optical fields…
▽ More
We present a theoretical study of the characteristics of the nonlinear spin-orbital angular momentum coupling induced by second-harmonic generation in plasmonic and dielectric nanostructures made of centrosymmetric materials. In particular, the connection between the phase singularities and polarization helicities in the longitudinal components of the fundamental and second-harmonic optical fields and the scatterer symmetry properties are discussed. By in-depth comparison between the interaction of structured optical beams with plasmonic and dielectric nanostructures, we have found that all-dielectric and plasmonic nanostructures that exhibit magnetic and electric resonances have comparable second-harmonic conversion efficiency. In addition, mechanisms for second-harmonic enhancement for single and chiral clusters of scatterers are unveiled and the relationships between the content of optical angular momentum of the incident optical beams and the enhancement of nonlinear light scattering is discussed. In particular, we formulate a general angular momenta conservation law for the nonlinear spin-orbital angular momentum interaction, which includes the quasi-angular-momentum of chiral structures with different-order rotational symmetry. As a key conclusion of our study relevant to nanophotonics, we argue that all-dielectric nanostructures provide a more suitable platform to investigate experimentally the nonlinear interaction between spin and orbital angular momenta, as compared to plasmonic ones, chiefly due to their narrower resonance peaks, lower intrinsic losses, and higher sustainable optical power.
△ Less
Submitted 19 April, 2017;
originally announced April 2017.
-
Dissipative Quantum Electromagnetics
Authors:
Wei E. I. Sha,
Aiyin Y. Liu,
Weng Cho Chew
Abstract:
The dissipative quantum electromagnetics is introduced in a comprehensive manner as a field-matter-bath coupling problem. First, the matter is described by a cluster of Lorentz oscillators. Then the Maxwellian free field is coupled to the Lorentz oscillators to describe a frequency dispersive medium. The classical Hamiltonian is derived for such a coupled system, using Lorenz gauge and decoupled s…
▽ More
The dissipative quantum electromagnetics is introduced in a comprehensive manner as a field-matter-bath coupling problem. First, the matter is described by a cluster of Lorentz oscillators. Then the Maxwellian free field is coupled to the Lorentz oscillators to describe a frequency dispersive medium. The classical Hamiltonian is derived for such a coupled system, using Lorenz gauge and decoupled scalar and vector potential formulations. The classical equations of motion are derivable from the Hamiltonian using Hamilton equations. Then the Hamiltonian is quantized with all the pertinent variables with the introduction of commutators between the variables and their conjugate pairs. The quantum equations of motion can be derived using the quantum Hamilton equations. It can be shown that such a quantization scheme preserves the quantum commutators introduced. Then a noise bath consisting of simple harmonic oscillators is introduced and coupled to the matter consisting of Lorentz oscillators to induce quantum loss. Langevin source emerges naturally in such a procedure, and it can be shown that the results are consistent with the fluctuation dissipation theorem, and the quantization procedure of Welsch's group. The advantage of the present procedure is that no diagonalization of the Hamiltonian is necessary to arrive at the quantum equations of motion. Finally, we apply the quantization scheme to model spontaneous emission of a two-level polarized atom placed above a dielectric cylinder that supports a bound state in the continuum.
△ Less
Submitted 19 November, 2018; v1 submitted 8 April, 2017;
originally announced April 2017.
-
Exploring the Way to Approach the Efficiency Limit of Perovskite Solar Cells by Drift-Diffusion Model
Authors:
Xingang Ren,
Zishuai Wang,
Wei E. I. Sha,
Wallace C. H. Choy
Abstract:
Drift-diffusion model is an indispensable modeling tool to understand the carrier dynamics (transport, recombination, and collection) and simulate practical-efficiency of solar cells (SCs) through taking into account various carrier recombination losses existing in multilayered device structures. Exploring the way to predict and approach the SC efficiency limit by using the drift-diffusion model w…
▽ More
Drift-diffusion model is an indispensable modeling tool to understand the carrier dynamics (transport, recombination, and collection) and simulate practical-efficiency of solar cells (SCs) through taking into account various carrier recombination losses existing in multilayered device structures. Exploring the way to predict and approach the SC efficiency limit by using the drift-diffusion model will enable us to gain more physical insights and design guidelines for emerging photovoltaics, particularly perovskite solar cells. Our work finds out that two procedures are the prerequisites for predicting and approaching the SC efficiency limit. Firstly, the intrinsic radiative recombination needs to be corrected after adopting optical designs which will significantly affect the open-circuit voltage at its Shockley-Queisser limit. Through considering a detailed balance between emission and absorption of semiconductor materials at the thermal equilibrium, and the Boltzmann statistics at the non-equilibrium, we offer a different approach to derive the accurate expression of intrinsic radiative recombination with the optical corrections for semiconductor materials. The new expression captures light trapping of the absorbed photons and angular restriction of the emitted photons simultaneously, which are ignored in the traditional Roosbroeck-Shockley expression. Secondly, the contact characteristics of the electrodes need to be carefully engineered to eliminate the charge accumulation and surface recombination at the electrodes. The selective contact or blocking layer incorporated nonselective contact that inhibits the surface recombination at the electrode is another important prerequisite. With the two procedures, the accurate prediction of efficiency limit and precise evaluation of efficiency degradation for perovskite solar cells are attainable by the drift-diffusion model.
△ Less
Submitted 19 April, 2017; v1 submitted 22 March, 2017;
originally announced March 2017.