Showing 1–50 of 83 results for author: Sha, W

Capacity Enhancement Analysis and Implementation of a 3D Array Based on Miniaturized Dipole Antennas

Authors: Yongzheng Li, Wanchen Yang, Shuai S. A. Yuan, Zhitao Ye, Chongwen Huang, Xiaoming Chen, Wenquan Che, Wei E. I. Sha

Abstract: Theoretically, the three-dimensional (3D) array architecture provides a higher communication degree of freedom (DoF) compared to the planar arrays, allowing for greater capacity potential in multiple-input multiple-output (MIMO) systems. However, in practical implementations, the upper elements of 3D arrays significantly degrade the performance of the lower elements, leading to increased inter-ele… ▽ More Theoretically, the three-dimensional (3D) array architecture provides a higher communication degree of freedom (DoF) compared to the planar arrays, allowing for greater capacity potential in multiple-input multiple-output (MIMO) systems. However, in practical implementations, the upper elements of 3D arrays significantly degrade the performance of the lower elements, leading to increased inter-element correlation and reduced array efficiency. As a result, the expected enhancement in MIMO performance is often suboptimal. To address this issue, this work employs a miniaturized antenna element to reduce the inter-element correlation and thus enhance the DoF of the 3D array. Moreover, to mitigate the efficiency degradation of the lower elements caused by the upper ones, the structures of lower elements are modified to achieve wideband impedance matching. The influence of upper element profile distribution on DoF and element efficiency is investigated, and the scalability of the proposed 3D array is theoretically analyzed. Finally, the MIMO performance of the proposed 3D array is evaluated under 3GPP scenarios, demonstrating a 16% higher capacity than conventional 2D arrays under the same SNR of 20 dB and a physical aperture area of 6.26 λ02. These results indicate that 3D arrays of appropriately arranged miniaturized elements offer a promising approach to enhancing MIMO system performance. △ Less

Submitted 24 May, 2025; originally announced May 2025.

Comments: This manuscript hvae been submitted to IEEE Transactions on Antennas and Propagation. Under review currently

Robust entangled photon generation enabled by single-shot Floquet driving

Authors: Jun-Yong Yan, Paul C. A. Hagen, Hans-Georg Babin, Wei E. I. Sha, Andreas D. Wieck, Arne Ludwig, Chao-Yuan Jin, Vollrath M. Axt, Da-Wei Wang, Moritz Cygorek, Feng Liu

Abstract: Quantum emitters driven by resonant two-photon excitation are a leading source for deterministically generated entangled photon pairs, essential for scalable photonic quantum technologies. However, conventional resonant schemes are highly sensitive to laser power fluctuations and pose additional experimental challenges for emitters with small biexciton binding energies. Here, we demonstrate how bi… ▽ More Quantum emitters driven by resonant two-photon excitation are a leading source for deterministically generated entangled photon pairs, essential for scalable photonic quantum technologies. However, conventional resonant schemes are highly sensitive to laser power fluctuations and pose additional experimental challenges for emitters with small biexciton binding energies. Here, we demonstrate how biexciton preparation schemes with significantly improved robustness and reduced laser filtering requirements can be identified using a novel design principle beyond resonant and adiabatic driving: ultrafast single-shot Floquet driving. This is achieved by employing two strongly and symmetrically detuned dichromatic pulses, whose superposition generates a stroboscopic Hamiltonian that enables direct coupling between ground and biexciton states. Moreover, a pulse delay serves as a tuning knob, introducing an effective magnetic field that concentrates the Bloch sphere trajectory at the biexciton state for a wide range of parameters, making biexciton preparation particularly robust. Experimentally, we achieve a biexciton occupation exceeding 96% and preserve photon-pair entanglement with a fidelity of 93.4%. Our scheme highlights the great impact of Floquet-engineered multicolour excitation protocols for on-demand quantum light sources. △ Less

Submitted 6 May, 2025; v1 submitted 3 April, 2025; originally announced April 2025.

Comments: Manuscript with 10 pages and 4 figures plus Supplementary Information comprising 8 pages and 7 figures

High-Order Modulation Large MIMO Detector Based on Physics-Inspired Methods

Authors: Qing-Guo Zeng, Xiao-Peng Cui, Xian-Zhe Tao, Jia-Qi Hu, Shi-Jie Pan, Wei E. I. Sha, Man-Hong Yung

Abstract: Applying quantum annealing or current quantum-/physics-inspired algorithms for MIMO detection always abandon the direct gray-coded bit-to-symbol mapping in order to obtain Ising form, leading to inconsistency errors. This often results in slow convergence rates and error floor, particularly with high-order modulations. We propose HOPbit, a novel MIMO detector designed to address this issue by tran… ▽ More Applying quantum annealing or current quantum-/physics-inspired algorithms for MIMO detection always abandon the direct gray-coded bit-to-symbol mapping in order to obtain Ising form, leading to inconsistency errors. This often results in slow convergence rates and error floor, particularly with high-order modulations. We propose HOPbit, a novel MIMO detector designed to address this issue by transforming the MIMO detection problem into a higher-order unconstrained binary optimization (HUBO) problem while maintaining gray-coded bit-to-symbol mapping. The method then employs the simulated probabilistic bits (p-bits) algorithm to directly solve HUBO without degradation. This innovative strategy enables HOPbit to achieve rapid convergence and attain near-optimal maximum-likelihood performance in most scenarios, even those involving high-order modulations. The experiments show that HOPbit surpasses ParaMax by several orders of magnitude in terms of bit error rate (BER) in the context of 12-user massive and large MIMO systems even with computing resources. In addition, HOPbit achieves lower BER rates compared to other traditional detectors. △ Less

Submitted 24 February, 2025; originally announced February 2025.

Extraction of power transmission parameters from PT-symmetric waveguides

Authors: Chengnian Huang, Zhihao Lan, Menglin L. N. Chen, Wei E. I. Sha

Abstract: The PT-symmetric waveguides have been frequently discussed in the photonics community due to their extraordinary properties. Especially, the study of power transmission is significant for switching applications. The aim of this study is to extract the mode power transmission parameters based on the coupled mode equations and analyze the power properties of the PT-symmetric system. The equations re… ▽ More The PT-symmetric waveguides have been frequently discussed in the photonics community due to their extraordinary properties. Especially, the study of power transmission is significant for switching applications. The aim of this study is to extract the mode power transmission parameters based on the coupled mode equations and analyze the power properties of the PT-symmetric system. The equations relying on the coupled mode theory are constructed according to the two different orthogonality relations between the original and adjoint system. The results matching well with the finite difference simulations demonstrate the validity of our method, while the conventional coupled mode theory fails. The power properties in the PT-symmetric and PT-broken phases are also observed. Furthermore, a new integration is implemented from which the conserved quantity is defined and extracted, which reflects the Hamiltonian invariant of the system. Our method fully incorporates the properties of complex modes and allows the study of the power transmission properties based on the orthogonality relations, which is also applicable to other types of non-Hermitian optical systems. This work provides a new perspective for the power analysis of PT-symmetric waveguides and is helpful to design the switching devices. △ Less

Submitted 8 February, 2025; originally announced February 2025.

Comments: 15 pages, 10 figures, published to Optics Express

Journal ref: Optics Express, vol. 33, no. 2, pp. 3162-3176, Jan. 2025

A Parallel Block Preconditioner-Based VIE-FFT Algorithm for Modeling the Electromagnetic Response From Nanostructures

Authors: Chengnian Huang, Wei E. I. Sha

Abstract: The superior ability of nanostructures to manipulate light has propelled extensive applications in nano-electromagnetic components and devices. Computational electromagnetics plays a critical role in characterizing and optimizing the nanostructures. In this work, a parallel block preconditioner based volume integral equation (VIE)-fast Fourier transform (FFT) algorithm is proposed to model the ele… ▽ More The superior ability of nanostructures to manipulate light has propelled extensive applications in nano-electromagnetic components and devices. Computational electromagnetics plays a critical role in characterizing and optimizing the nanostructures. In this work, a parallel block preconditioner based volume integral equation (VIE)-fast Fourier transform (FFT) algorithm is proposed to model the electromagnetic response from representative nanostructures. The VIE using uniform Cartesian grids is first built, and then the entire volumetric domain is partitioned into geometric subdomains based on the regularity and topology of the nanostructure. The block diagonal matrix is thus established, whose inverse matrix serves as a preconditioner for the original matrix equation. The resulting linear system is solved by the bi-conjugate gradient stabilized (BiCGSTAB) method with different residual error tolerances in the inner and outer iteration processes; and the FFT algorithm is used to accelerate the matrix-vector product (MVM) operations throughout. Furthermore, because of the independence between the inner processes of solving block matrix equations, the OpenMP framework is empolyed to execute the parallel operations. Numerical experiments indicate that the proposed method is effective and reduces both the iteration number and the computational time significantly for the representative nano-electromagnetic problems like the dielectric focusing metasurfaces and the plasmonic solar cells. △ Less

Submitted 23 January, 2025; originally announced January 2025.

Comments: 6 pages, 8 figures, published to IEEE Transactions on Antennas and Propagation

Journal ref: IEEE Transactions on Antennas and Propagation, vol. 72, no. 1, pp. 1051-1056, Jan. 2024

SolarDesign: An Online Photovoltaic Device Simulation and Design Platform

Authors: Wei E. I. Sha, Xiaoyu Wang, Wenchao Chen, Yuhao Fu, Lijun Zhang, Liang Tian, Minshen Lin, Shudi Jiao, Ting Xu, Tiange Sun, Dongxue Liu

Abstract: SolarDesign (https://solardesign.cn/) is an online photovoltaic device simulation and design platform that provides engineering modeling analysis for crystalline silicon solar cells, as well as emerging high-efficiency solar cells such as organic, perovskite, and tandem cells. The platform offers user-updatable libraries of basic photovoltaic materials and devices, device-level multi-physics simul… ▽ More SolarDesign (https://solardesign.cn/) is an online photovoltaic device simulation and design platform that provides engineering modeling analysis for crystalline silicon solar cells, as well as emerging high-efficiency solar cells such as organic, perovskite, and tandem cells. The platform offers user-updatable libraries of basic photovoltaic materials and devices, device-level multi-physics simulations involving optical-electrical-thermal interactions, and circuit-level compact model simulations based on detailed balance theory. Employing internationally advanced numerical methods, the platform accurately, rapidly, and efficiently solves optical absorption, electrical transport, and compact circuit models. It achieves multi-level photovoltaic simulation technology from ``materials to devices to circuits'' with fully independent intellectual property rights. Compared to commercial software, the platform achieves high accuracy and improves speed by more than an order of magnitude. Additionally, it can simulate unique electrical transport processes in emerging solar cells, such as quantum tunneling, exciton dissociation, and ion migration. △ Less

Submitted 27 December, 2024; originally announced December 2024.

Comments: 12 pages, 7 figures, 3 tables

Journal ref: Chinese Physics B 34(1): 018801, 2024

Photonic Terahertz Phased Array

Authors: Li Niu, Xi Feng, Xueqian Zhang, Yongchang Lu, Qingwei Wang, Quan Xu, Xieyu Chen, Jiajun Ma, Haidi Qiu, Wei E. I. Sha, Shuang Zhang, Andrea Alù, Weili Zhang, Jiaguang Han

Abstract: Phased arrays are crucial in various technologies, such as radar and wireless communications, due to their ability to precisely control and steer electromagnetic waves. This precise control improves signal processing and enhances imaging performance. However, extending phased arrays to the terahertz (THz) frequency range has proven challenging, especially for high-frequency operation, broadband pe… ▽ More Phased arrays are crucial in various technologies, such as radar and wireless communications, due to their ability to precisely control and steer electromagnetic waves. This precise control improves signal processing and enhances imaging performance. However, extending phased arrays to the terahertz (THz) frequency range has proven challenging, especially for high-frequency operation, broadband performance, two-dimensional (2D) phase control with large antenna arrays, and strong phase modulation. Here, we introduce a photonic platform to realize a THz phased array that bypasses the above challenges. Our method employs 2D phase coding with 2-bit across a broad THz frequency range from 0.8 to 1.4 THz. The core of our design is a pixelated nonlinear Pancharatnam-Berry metasurface driven by a spatially modulated femtosecond laser, allowing precise phase control of THz signals. We showcase the effectiveness of our method through four proof-of-concept applications: single beamforming, dual beamforming, imaging and vortex beam generation. The realized photonic platform provides a promising pathway for developing broadband phased arrays in the THz regime. △ Less

Submitted 17 December, 2024; originally announced December 2024.

Cavity-Quantum Electrodynamics with Moiré Flatband Photonic Crystals

Authors: Yu-Tong Wang, Qi-Hang Ye, Jun-Yong Yan, Yufei Qiao, Chen Chen, Xiao-Tian Cheng, Chen-Hui Li, Zi-Jian Zhang, Cheng-Nian Huang, Yun Meng, Kai Zou, Wen-Kang Zhan, Chao Zhao, Xiaolong Hu, Clarence Augustine T H Tee, Wei E. I. Sha, Zhixiang Huang, Huiyun Liu, Chao-Yuan Jin, Lei Ying, Feng Liu

Abstract: Quantum emitters are a key component in photonic quantum technologies. Enhancing their single-photon emission by engineering the photonic environment using cavities can significantly improve the overall efficiency in quantum information processing. However, this enhancement is often constrained by the need for precise nanoscale control over the emitter's position within micro- or nano-cavities. In… ▽ More Quantum emitters are a key component in photonic quantum technologies. Enhancing their single-photon emission by engineering the photonic environment using cavities can significantly improve the overall efficiency in quantum information processing. However, this enhancement is often constrained by the need for precise nanoscale control over the emitter's position within micro- or nano-cavities. Inspired by the fascinating physics of moiré patterns, we present an approach to strongly modify the spontaneous emission rate of a quantum emitter using a finely designed multilayer moiré photonic crystal with a robust isolated-flatband dispersion. Theoretical analysis reveals that, due to its nearly infinite photonic density of states, the moiré cavity can simultaneously achieve a high Purcell factor and exhibit large tolerance over the emitter's position. We experimentally demonstrate the coupling between this moiré cavity and a quantum dot through the cavity-determined polarization of the dot's emission. The radiative lifetime of the quantum dot can be tuned by a factor of 40, ranging from 42 ps to 1692 ps, which is attributed to strong Purcell enhancement and Purcell inhibition effects. Our findings pave the way for moiré flatband cavity-enhanced quantum light sources, quantum optical switches, and quantum nodes for quantum internet applications. △ Less

Submitted 6 June, 2025; v1 submitted 25 November, 2024; originally announced November 2024.

Journal ref: Sci. Adv. 11 (2025) eadv8115

A wireless passive pressure sensor with high sensitivity

Authors: Baiyun Wang, Yijia Cheng, Yujie Hua, Wenxuan Tang, Wei E. I. Sha, Hao Xu, Kang Wang, Jundi Hu, Huaqing Fan, Huanran Peng, Gang Shao

Abstract: A high-sensitivity wireless pressure sensor with active processing structure designed on the dielectric substrate has been present and evaluated in this paper. The sensor configuration has been optimized by computer-aided design to achieve highest sensitivity and maximum working range for a given dimension. With the average sensitivity of 187kHz/kPa, the proposed pressure sensor is equipped with t… ▽ More A high-sensitivity wireless pressure sensor with active processing structure designed on the dielectric substrate has been present and evaluated in this paper. The sensor configuration has been optimized by computer-aided design to achieve highest sensitivity and maximum working range for a given dimension. With the average sensitivity of 187kHz/kPa, the proposed pressure sensor is equipped with the ability to measure pressure loaded up to 1.5MPa under room temperature. Additionally, a novel simulation method applied on pressure related design is proposed in this article, with the accuracy reaching threefold enhancement, filling the blank of electromagnetic simulation of pressure deformation. Other characteristics of the devices have been investigated and are presented. △ Less

Submitted 24 November, 2024; originally announced November 2024.

Enabling low threshold laser through an asymmetric tetramer metasurface harnessing polarization-independent quasi-BICs

Authors: T. Wang, W. Z. Di, W. E. I. Sha, R. P. Zaccaria

Abstract: We propose and numerically demonstrate a novel strategy to achieve dual-band symmetry-protected bound states in the continuum (BICs) based on a nanodisk tetramer metasurface for lasing generation. The method involves breaking the in-plane symmetry along the diagonal of the metasurface unit cell by introducing air holes in the tetramers. Through our simulations, we show that this flexible approach… ▽ More We propose and numerically demonstrate a novel strategy to achieve dual-band symmetry-protected bound states in the continuum (BICs) based on a nanodisk tetramer metasurface for lasing generation. The method involves breaking the in-plane symmetry along the diagonal of the metasurface unit cell by introducing air holes in the tetramers. Through our simulations, we show that this flexible approach enables the support of dual-band BICs in the telecom-band range, with these modes evolving into quasi-BICs with remarkably high quality factors by breaking the symmetry of the system. Furthermore, the ultracompact device exhibits the unique characteristic of being polarization-independent across all viewing angles. Finally, the optically pumped gain medium provides sufficient optical gain to compensate the quasi-BIC mode losses, enabling two mode lasing with ultra-low pump threshold and very narrow optical linewidth in the telecom-band range. Our adaptable device paves the way for polarization-insensitive metasurfaces with multiple lasing resonances. This innovation holds the potential to transform areas like low-threshold lasing and biosensing by delivering improved performance and broader capabilities. △ Less

Submitted 25 November, 2024; v1 submitted 24 November, 2024; originally announced November 2024.

Quantum-inspired Beamforming Optimization for Quantized Phase-only Massive MIMO Arrays

Authors: Yutong Jiang, Hangyu Ge, Bi-Ying Wang, Shuai S. A. Yuan, Shi-Jie Pan, Hongjing Xu, Xiaopeng Cui, Man-Hong Yung, Feng Liu, Wei E. I. Sha

Abstract: This paper introduces an innovative quantum-inspired method for beamforming (BF) optimization in multiple-input multiple-output (MIMO) arrays. The method leverages the simulated bifurcation (SB) algorithm to address the complex combinatorial optimization problem due to the quantized phase configuration. We propose novel encoding techniques for high-bit phase quantization, which are then mapped int… ▽ More This paper introduces an innovative quantum-inspired method for beamforming (BF) optimization in multiple-input multiple-output (MIMO) arrays. The method leverages the simulated bifurcation (SB) algorithm to address the complex combinatorial optimization problem due to the quantized phase configuration. We propose novel encoding techniques for high-bit phase quantization, which are then mapped into Ising spins. This enables efficient construction of the Hamiltonians and subsequent optimization of BF patterns. The results clearly demonstrate that the SB optimizer surpasses traditional schemes such as digital BF, holographic algorithms and genetic algorithms, offering faster convergence and higher solution quality. The impressive capability of the SB optimizer to handle complex BF scenarios, including sidelobe suppression and multiple beams with nulls, is undoubtedly demonstrated through several application cases. These findings strongly suggest that quantum-inspired methods have great potential to advance MIMO techniques in next-generation wireless communication. △ Less

Submitted 28 May, 2025; v1 submitted 30 September, 2024; originally announced September 2024.

Impact of Imprecision of the Time Delay on Imaging Result in Confocal Algorithm

Authors: Wenyi Shao, Beibei Zhou, Gang Wang

Abstract: The confocal microwave imaging (CMI) algorithm, which is used in radar imaging, has been applied to microwave medical imaging (MMI) [1, 2]. In MMI, the diseased region to be imaged has different electromagnetic characteristics from that of the surroundings. Time -domain MMI system often radiates an ultra-wideband pulse and then collect the backscatter signals with an antenna array. The time delay… ▽ More The confocal microwave imaging (CMI) algorithm, which is used in radar imaging, has been applied to microwave medical imaging (MMI) [1, 2]. In MMI, the diseased region to be imaged has different electromagnetic characteristics from that of the surroundings. Time -domain MMI system often radiates an ultra-wideband pulse and then collect the backscatter signals with an antenna array. The time delay is then compensated for every unit in the array according to the time flight to each focal point within the region of interest. The compensated signals are finally summed to calculate the pixel value of each focal point. This process is repeated to achieve the value for all focal points in a 3D space to reconstruct the image. Since the method is only constrained in the time domain, the complexity is minimal, and an image can be obtained usually in few seconds. This paper discusses the robustness of CMI in MMI. Specifically, we analyzed the variation of image contrast as errors occur in the time-delay calculation. A simplified model of breast cancer detection was implemented to study the relationship between time-shift errors and the impact on images, quantitatively. △ Less

Submitted 28 September, 2024; originally announced September 2024.

Comments: 4 pages, 3 figures

An Example of Microwave Diagnosis for Knee Osteophyte by 3D Parallel FD-FDTD Approach

Authors: Wenyi Shao, Todd McCollough, Arezou Edalati, William McCollough

Abstract: A parallel 3-D Frequency Dependent Finite Difference Time Domain (FD-FDTD) method was implemented based on the Single Program Multiple Data (SPMD) technique to analyze the feasibility of microwave diagnosis for the human knees. The parallel algorithm efficiently accelerates the FDTD computation for a large 3-D numerical knee model derived from a real human. Examinations in the frequency domain and… ▽ More A parallel 3-D Frequency Dependent Finite Difference Time Domain (FD-FDTD) method was implemented based on the Single Program Multiple Data (SPMD) technique to analyze the feasibility of microwave diagnosis for the human knees. The parallel algorithm efficiently accelerates the FDTD computation for a large 3-D numerical knee model derived from a real human. Examinations in the frequency domain and time domain were applied to investigate the penetration of the electromagnetic (EM) waves into the knee. Results show that the attenuation of the microwave signal allows for a several-Gigahertz-bandwidth signal to be used for ultra-wide band microwave diagnosis. Knee osteophyte detection was undertaken as an example of the knee disease diagnosis to verify this technique. A small abnormal growth in the knee joint was successfully detected by the microwave imaging approach. △ Less

Submitted 23 October, 2024; v1 submitted 21 September, 2024; originally announced September 2024.

Comments: 8 pages, 10 figures

Three-Dimensional Venus Cloud Structure Simulated by a General Circulation Model

Authors: Wencheng D. Shao, João M. Mendonça, Longkang Dai

Abstract: The clouds have a great impact on Venus's energy budget and climate evolution, but its three-dimensional structure is still not well understood. Here we incorporate a simple Venus cloud physics scheme into a flexible GCM to investigate the three-dimensional cloud spatial variability. Our simulations show good agreement with observations in terms of the vertical profiles of clouds and H2SO4 vapor.… ▽ More The clouds have a great impact on Venus's energy budget and climate evolution, but its three-dimensional structure is still not well understood. Here we incorporate a simple Venus cloud physics scheme into a flexible GCM to investigate the three-dimensional cloud spatial variability. Our simulations show good agreement with observations in terms of the vertical profiles of clouds and H2SO4 vapor. H2O vapor is overestimated above the clouds due to efficient transport in the cloud region. The cloud top decreases as latitude increases, qualitatively consistent with Venus Express observations. The underlying mechanism is the combination of H2SO4 chemical production and meridional circulation. The mixing ratios of H2SO4 at 50-60 km and H2O vapors in the main cloud deck basically exhibit maxima around the equator, due to the effect of temperature's control on the saturation vapor mixing ratios of the two species. The cloud mass distribution is subject to both H2SO4 chemical production and dynamical transport and shows a pattern that peaks around the equator in the upper cloud while peaks at mid-high latitudes in the middle cloud. At low latitudes, H2SO4 and H2O vapors, cloud mass loading and acidity show semidiurnal variations at different altitude ranges, which can be validated against future missions. Our model emphasizes the complexity of the Venus climate system and the great need for more observations and simulations to unravel its spatial variability and underlying atmospheric and/or geological processes. △ Less

Submitted 22 July, 2024; originally announced July 2024.

Comments: 34 pages, 8 figures, 8 supporting figures. Accepted by JGR-Planets

Revealing the molecular structures of a-Al2O3(0001)-water interface by machine learning based computational vibrational spectroscopy

Authors: Xianglong Du, Weizhi Shao, Chenglong Bao, Linfeng Zhang, Jun Cheng, Fujie Tang

Abstract: Solid-water interfaces are crucial to many physical and chemical processes and are extensively studied using surface-specific sum-frequency generation (SFG) spectroscopy. To establish clear correlations between specific spectral signatures and distinct interfacial water structures, theoretical calculations using molecular dynamics (MD) simulations are required. These MD simulations typically need… ▽ More Solid-water interfaces are crucial to many physical and chemical processes and are extensively studied using surface-specific sum-frequency generation (SFG) spectroscopy. To establish clear correlations between specific spectral signatures and distinct interfacial water structures, theoretical calculations using molecular dynamics (MD) simulations are required. These MD simulations typically need relatively long trajectories (a few nanoseconds) to achieve reliable SFG response function calculations via the dipole-polarizability time correlation function. However, the requirement for long trajectories limits the use of computationally expensive techniques such as ab initio MD (AIMD) simulations, particularly for complex solid-water interfaces. In this work, we present a pathway for calculating vibrational spectra (IR, Raman, SFG) of solid-water interfaces using machine learning (ML)-accelerated methods. We employ both the dipole moment-polarizability correlation function and the surface-specific velocity-velocity correlation function approaches to calculate SFG spectra. Our results demonstrate the successful acceleration of AIMD simulations and the calculation of SFG spectra using ML methods. This advancement provides an opportunity to calculate SFG spectra for the complicated solid-water systems more rapidly and at a lower computational cost with the aid of ML. △ Less

Submitted 9 September, 2024; v1 submitted 21 July, 2024; originally announced July 2024.

Comments: 35 pages, 14 figures; accepted by Journal of Chemical Physics in the special issue of "Festschrift in honor of Yuen-Ron Shen"

Journal ref: J. Chem. Phys. 161, 124702 (2024)

Capturing dynamics and thermodynamics of a three-level quantum heat engine via programmable quantum circuits

Authors: Gao-xiang Deng, Zhe He, Yu Liu, Wei Shao, Zheng Cui

Abstract: This research employs the Kraus representation and Sz.-Nagy dilation theorem to model a three-level quantum heat on quantum circuits, investigating its dynamic evolution and thermodynamic performance. The feasibility of the dynamic model is validated by tracking the changes of population. On the basis of reinforcement learning algorithm, the optimal cycle of the quantum heat engine for maximal ave… ▽ More This research employs the Kraus representation and Sz.-Nagy dilation theorem to model a three-level quantum heat on quantum circuits, investigating its dynamic evolution and thermodynamic performance. The feasibility of the dynamic model is validated by tracking the changes of population. On the basis of reinforcement learning algorithm, the optimal cycle of the quantum heat engine for maximal average power is proposed and verified by the thermodynamic model. The stability of quantum circuit simulations is scrutinized through a comparative analysis of theoretical and simulated results, predicated on an orthogonal test. These results affirm the practicality of simulating quantum heat engines on quantum circuits, offering potential for substantially curtailing the experimental expenses associated with the construction of such engines. △ Less

Submitted 27 May, 2024; originally announced May 2024.

Spin and Orbital Angular Momenta of Electromagnetic Waves: From Classical to Quantum Forms

Authors: Wei E. I. Sha, Zhihao Lan, Menglin L. N. Chen, Yongpin P. Chen, Sheng Sun

Abstract: Angular momenta of electromagnetic waves are important both in concepts and applications. In this work, we systematically discuss two types of angular momenta, i.e., spin angular momentum and orbital angular momentum in various cases, e.g., with source and without source, in classical and quantum forms. Numerical results demonstrating how to extract the topological charge of a classical vortex bea… ▽ More Angular momenta of electromagnetic waves are important both in concepts and applications. In this work, we systematically discuss two types of angular momenta, i.e., spin angular momentum and orbital angular momentum in various cases, e.g., with source and without source, in classical and quantum forms. Numerical results demonstrating how to extract the topological charge of a classical vortex beam by spectral method are also presented. △ Less

Submitted 3 March, 2024; originally announced March 2024.

Comments: 5 pages, 3 figures

Journal ref: IEEE Journal on Multiscale and Multiphysics Computational Techniques, 2024

Experimental demonstration of steady-state dynamics of three-level quantum heat engine using superconducting quantum circuits

Authors: Gao-xiang Deng, Haoqiang Ai, Wei Shao, Yu Liu, Zheng Cui

Abstract: The three-level system represents the smallest quantum system capable of autonomous cycling in quantum heat engines. This study proposes a method to simulate the steady-state dynamics of a three-level quantum heat engine by designing and implementing superconducting quantum circuits. Following error mitigation, the outcomes from the quantum circuit model designed in this study, when executed on a… ▽ More The three-level system represents the smallest quantum system capable of autonomous cycling in quantum heat engines. This study proposes a method to simulate the steady-state dynamics of a three-level quantum heat engine by designing and implementing superconducting quantum circuits. Following error mitigation, the outcomes from the quantum circuit model designed in this study, when executed on a real quantum device, closely align with theoretical predictions, thereby validating the effectiveness of the circuit model. This study offers a novel approach for investigating three-level quantum heat engines, enabling the verification of theoretical research findings while also reducing the complexity and cost of experimental procedures. △ Less

Submitted 14 May, 2024; v1 submitted 28 January, 2024; originally announced January 2024.

Quantifying Nonradiative Recombination and Resistive Losses in Perovskite Photovoltaics: A Modified Diode Model Approach

Authors: Minshen Lin, Xuehui Xu, Hong Tian, Yang Michael Yang, Wei E. I. Sha, Wenxing Zhong

Abstract: Pinpointing the origin of inefficiency can expedite the process of optimizing the efficiency of perovskite photovoltaics. However, it is challenging to discern and quantify the different loss pathways in a complete perovskite photovoltaic device under operational conditions. To address this challenge, we propose a modified diode model that can quantify bulk/interface defect-assisted recombination… ▽ More Pinpointing the origin of inefficiency can expedite the process of optimizing the efficiency of perovskite photovoltaics. However, it is challenging to discern and quantify the different loss pathways in a complete perovskite photovoltaic device under operational conditions. To address this challenge, we propose a modified diode model that can quantify bulk/interface defect-assisted recombination and series/shunt resistive losses. By adopting drift-diffusion simulation as the benchmark, we explore the physical meanings of the modified diode model parameters and evaluate the performance of the model for simulation parameters spanning many orders of magnitude. Our evaluation shows that, in most practical cases, the proposed model can accurately quantify all the aforementioned losses, and in some special cases, it is possible to identify the predominant loss pathway. Moreover, we apply the modified diode model to our lab-produced devices (based on Cs0.05FA0.95PbI3 perovskites), demonstrating its effectiveness in quantifying entangled losses in practice. Finally, we provide a set of guidelines for applying the modified diode model and interpreting the results. Source code available at https://github.com/WPT-Lab124/Modified-Diode-Model. △ Less

Submitted 30 November, 2023; v1 submitted 29 November, 2023; originally announced November 2023.

Comments: 26 pages, 6 figures, published in Solar RRL

Breaking the Degrees-of-Freedom Limit of Holographic MIMO Communications: A 3-D Antenna Array Topology

Authors: Shuai S. A. Yuan, Jie Wu, Hongjing Xu, Tengjiao Wang, Da Li, Xiaoming Chen, Chongwen Huang, Sheng Sun, Shilie Zheng, Xianmin Zhang, Er-Ping Li, Wei E. I. Sha

Abstract: The performance of holographic multiple-input multiple-output (MIMO) communications, employing two-dimensional (2-D) planar antenna arrays, is typically compromised by finite degrees-of-freedom (DOF) stemming from limited array size. The DOF constraint becomes significant when the element spacing approaches approximately half a wavelength, thereby restricting the overall performance of MIMO system… ▽ More The performance of holographic multiple-input multiple-output (MIMO) communications, employing two-dimensional (2-D) planar antenna arrays, is typically compromised by finite degrees-of-freedom (DOF) stemming from limited array size. The DOF constraint becomes significant when the element spacing approaches approximately half a wavelength, thereby restricting the overall performance of MIMO systems. To break this inherent limitation, we propose a novel three-dimensional (3-D) antenna array that strategically explores the untapped vertical dimension. We investigate the performance of MIMO systems utilizing 3-D arrays across different multi-path scenarios, encompassing Rayleigh channels with varying angular spreads and the 3rd generation partnership project (3GPP) channels. We subsequently showcase the advantages of these 3-D arrays over their 2-D counterparts with the same aperture sizes. As a proof of concept, a practical dipole-based 3-D array, facilitated by an electromagnetic band-gap (EBG) reflecting surface, is conceived, constructed, and evaluated. The experimental results align closely with full-wave simulations, and channel simulations substantiate that the DOF and capacity constraints of traditional holographic MIMO systems can be surpassed by adopting such a 3-D array configuration. △ Less

Submitted 27 February, 2024; v1 submitted 6 November, 2023; originally announced November 2023.

Journal ref: IEEE Transactions on Vehicular Technology, Volume 73 , Issue 8, 2024

A high-Q metasurface signal isolator for 1.5T surface coil magnetic resonance imaging on the go

Authors: Qun Ren, Yuxin Lang, Yuqi Ja, Xia Xiao, Yu Liu, Xiangzheng Kong, Ruiqi Jin, Yongqing He, Jianwei You, Wei Sha, Yanwei Pang

Abstract: The combination of surface coils and metamaterials remarkably enhance magnetic resonance imaging (MRI) performance for significant local staging flexibility. However, due to the coupling in between, impeded signal-to-noise ratio (SNR) and low-contrast resolution, further hamper the future growth in clinical MRI. In this paper, we propose a high-Q metasurface decoupling isolator fueled by topologic… ▽ More The combination of surface coils and metamaterials remarkably enhance magnetic resonance imaging (MRI) performance for significant local staging flexibility. However, due to the coupling in between, impeded signal-to-noise ratio (SNR) and low-contrast resolution, further hamper the future growth in clinical MRI. In this paper, we propose a high-Q metasurface decoupling isolator fueled by topological LC loops for 1.5T surface coil MRI system, increasing the magnetic field up to fivefold at 63.8 MHz. We have employed a polarization conversion mechanism to effectively eliminate the coupling between the MRI metamaterial and the radio frequency (RF) surface transmitter-receiver coils. Furthermore, a high-Q metasurface isolator was achieved by taking advantage of bound states in the continuum (BIC) for extremely high-field MRI and spectroscopy. An equivalent physical model of the miniaturized metasurface design was put forward through LC circuit analysis. This study opens up a promising route for the easy-to-use and portable surface coil MRI scanners. △ Less

Submitted 30 October, 2023; originally announced October 2023.

Defect emission and its dipole orientation in layered ternary Znln2S4 semiconductor

Authors: Rui Wang, Quan Liu, Sheng Dai, Chao-Ming Liu, Yue Liu, Zhao-Yuan Sun, Hui Li, Chang-Jin Zhang, Han Wang, Cheng-Yan Xu, Wen-Zhu Shao, Alfred J. Meixner, Dai Zhang, Yang Li, Liang Zhen

Abstract: Defect engineering is promising to tailor the physical properties of two-dimensional (2D) semiconductors for function-oriented electronics and optoelectronics. Compared with the extensively studied 2D binary materials, the origin of defects and their influence on physical properties of 2D ternary semiconductors have not been clarified. In this work, we thoroughly studied the effect of defects on t… ▽ More Defect engineering is promising to tailor the physical properties of two-dimensional (2D) semiconductors for function-oriented electronics and optoelectronics. Compared with the extensively studied 2D binary materials, the origin of defects and their influence on physical properties of 2D ternary semiconductors have not been clarified. In this work, we thoroughly studied the effect of defects on the electronic structure and optical properties of few-layer hexagonal Znln2S4 via versatile spectroscopic tools in combination with theoretical calculations. It has been demonstrated that the Zn-In anti-structural defects induce the formation of a series of donor and acceptor levels inside the bandgap, leading to rich recombination paths for defect emission and extrinsic absorption. Impressively, the emission of donor-acceptor pair (DAP) in Znln2S4 can be significantly tailored by electrostatic gating due to efficient tunability of Fermi level (Ef). Furthermore, the layer-dependent dipole orientation of defect emission in Znln2S4 was directly revealed by back focal plane (BFP) imagining, where it presents obviously in-plane dipole orientation within a dozen layers thickness of Znln2S4. These unique features of defects in Znln2S4 including extrinsic absorption, rich recombination paths, gate tunability and in-plane dipole orientation will definitely benefit to the advanced orientation-functional optoelectronic applications. △ Less

Submitted 27 April, 2023; originally announced April 2023.

Effects of Mutual Coupling on Degree of Freedom and Antenna Efficiency in Holographic MIMO Communications

Authors: Shuai S. A. Yuan, Xiaoming Chen, Chongwen Huang, Wei E. I. Sha

Abstract: The holographic multiple-input-multiple-output (MIMO) communications refer to the MIMO systems built with ultra-dense antenna arrays, whose channel models and potential applications have attracted increasing attentions recently. When the spacing between adjacent array elements is larger than half wavelength, the effect of mutual coupling can generally be neglected in current antenna designs. Howev… ▽ More The holographic multiple-input-multiple-output (MIMO) communications refer to the MIMO systems built with ultra-dense antenna arrays, whose channel models and potential applications have attracted increasing attentions recently. When the spacing between adjacent array elements is larger than half wavelength, the effect of mutual coupling can generally be neglected in current antenna designs. However, in holographic MIMO communications, the influence of strong mutual coupling on antenna characteristics is inevitable, resulting in distorted radiation patterns and low radiation efficiencies. In this paper, starting from the analytical correlation and efficiency models, we investigate how the mutual coupling affects the capacity of a space-constrained MIMO system from the aspects of degree of freedom (DOF) and antenna efficiency. The involved fundamental concepts of correlation, DOF, efficiency and mutual coupling are crucial for both antenna and wireless-communication engineers when designing emerging MIMO communication systems. △ Less

Submitted 14 March, 2023; originally announced March 2023.

Journal ref: in IEEE Open Journal of Antennas and Propagation, vol. 4, pp. 237-244, 2023

Continuous Three-level Quantum Heat Engine with High Performance Under Medium Temperature Difference

Authors: Gao-xiang Deng, Wei Shao, Yu Liu, Zheng Cui

Abstract: The possibility of utilizing quantum effects to enhance the performance of quantum heat engines has been an active topic of research, but how to enhance the performance by optimizing the engine parameters needs to be further studied. In this study, the temperature difference and dissipation modes affecting the performance of a three-level quantum heat engine were analyzed using an orthogonal test.… ▽ More The possibility of utilizing quantum effects to enhance the performance of quantum heat engines has been an active topic of research, but how to enhance the performance by optimizing the engine parameters needs to be further studied. In this study, the temperature difference and dissipation modes affecting the performance of a three-level quantum heat engine were analyzed using an orthogonal test. The results indicated that the dissipation mode dominated the performance of the quantum heat engine. The quantum heat engine performs best when there is only resonance and no detuning; however, when detuning exists, a lower resonance can improve the efficiency by reducing energy losses. Regarding the temperature difference, the best performance was achieved at medium temperature difference owing to the decreasing heat leakage. Finally, the quantum friction caused by the detuning could make the maximal efficiency lower than the Carnot efficiency. △ Less

Submitted 13 April, 2023; v1 submitted 11 March, 2023; originally announced March 2023.

Journal ref: J. Appl. Phys. 133, 124903 (2023)

Performance evaluation of the 8-inch MCP-PMT for Jinping Neutrino Experiment

Authors: Aiqiang Zhang, Benda Xu, Jun Weng, Huiyou Chen, Wenhui Shao, Tong Xu, Ling Ren, Sen Qian, Zhe Wang, Shaomin Chen

Abstract: Jinping Neutrino Experiment plans to deploy a new type of 8-inch MCP-PMT with high photon detection efficiency for MeV-scale neutrino measurements. This work studies the performance of the MCP-PMTs, including the photon detection efficiency, the charge resolution of the single photoelectron, the transition time spread, single photoelectron response, rates of dark counts and after pulses. We find a… ▽ More Jinping Neutrino Experiment plans to deploy a new type of 8-inch MCP-PMT with high photon detection efficiency for MeV-scale neutrino measurements. This work studies the performance of the MCP-PMTs, including the photon detection efficiency, the charge resolution of the single photoelectron, the transition time spread, single photoelectron response, rates of dark counts and after pulses. We find a long tail in the charge distribution, and combined with the high photon detection efficiency, the overall energy resolution sees substantial improvements. Those results will be provided as the inputs to detector simulation and design. Our results show that the new PMT satisfies all the requirements of the Jinping Neutrino Experiment. △ Less

Submitted 9 March, 2023; originally announced March 2023.

Journal ref: Nucl. Instrum. Methods Phys. Res. A 1055 (2023) 168506

Performance of the 1-ton Prototype Neutrino Detector at CJPL-I

Authors: Yiyang Wu, Jinjing Li, Shaomin Chen, Wei Dou, Lei Guo, Ziyi Guo, Ghulam Hussain, Ye Liang, Qian Liu, Guang Luo, Wentai Luo, Ming Qi, Wenhui Shao, Jian Tang, Linyan Wan, Zhe Wang, Benda Xu, Tong Xu, Weiran Xu, Yuzi Yang, Lin Zhao, Aiqiang Zhang, Bin Zhang

Abstract: China Jinping Underground Laboratory provides an ideal site for solar, geo-, and supernova neutrino studies. With a prototype neutrino detector running since 2017, containing 1-ton liquid scintillator, we tested its experimental hardware, performed the detector calibration and simulation, and measured its radioactive backgrounds, as an early stage of the Jinping Neutrino Experiment (JNE). We inves… ▽ More China Jinping Underground Laboratory provides an ideal site for solar, geo-, and supernova neutrino studies. With a prototype neutrino detector running since 2017, containing 1-ton liquid scintillator, we tested its experimental hardware, performed the detector calibration and simulation, and measured its radioactive backgrounds, as an early stage of the Jinping Neutrino Experiment (JNE). We investigated the radon background and implemented the nitrogen sealing technology to control it. This paper presents the details of these studies and will serve as a key reference for the construction and optimization of the future large detector of JNE. △ Less

Submitted 6 June, 2023; v1 submitted 26 December, 2022; originally announced December 2022.

Large-area quantum-spin-Hall waveguide states in a three-layer topological photonic crystal heterostructure

Authors: Zhihao Lan, Menglin L. N. Chen, Jian Wei You, Wei E. I. Sha

Abstract: Topological photonic edge states are conventionally formed at the interface between two domains of topologically trivial and nontrivial photonic crystals. Recent works exploiting photonic quantum Hall and quantum valley Hall effects have shown that large-area topological waveguide states could be created in a three-layer topological heterostructure that consists of a finite-width domain featuring… ▽ More Topological photonic edge states are conventionally formed at the interface between two domains of topologically trivial and nontrivial photonic crystals. Recent works exploiting photonic quantum Hall and quantum valley Hall effects have shown that large-area topological waveguide states could be created in a three-layer topological heterostructure that consists of a finite-width domain featuring Dirac cone sandwiched between two domains of photonic crystals with opposite topological properties. In this work, we show that a new kind of large-area topological waveguide states could be created employing the photonic analogs of quantum spin Hall effect. Taking the well-used Wu-Hu model in topological photonics as an example, we show that sandwiching a finite-width domain of photonic crystals featuring double Dirac cone between two domains of expanded and shrunken unit cells could lead to the emergence of large-area topological helical waveguide states distributed uniformly in the middle domain. Importantly, we unveil a power-law scaling regarding to the size of the bandgap within which the large-area helical states reside as a function of the width of the middle domain, which implies that these large-area modes in principle could exist in the middle domain with arbitrary width. Moreover, pseudospin-momentum locking unidirectional propagations and robustness of these large-area waveguide modes against sharp bends are explicitly demonstrated. Our work enlarges the photonic systems and platforms that could be utilized for large-area-mode enabled topologically waveguiding. △ Less

Submitted 25 April, 2023; v1 submitted 17 October, 2022; originally announced October 2022.

Comments: close to published version

Journal ref: Phys. Rev. A 107, L041501 (2023)

A Topological Directional Coupler Fed by Microstrip Line with Configurable Coupling Coefficient

Authors: HongYu Shi, BoLin Li, Wei. E. I. Sha, ZhiHao Lan, Fei Gao, JianJia Yi, AnXue Zhang, Zhuo Xu

Abstract: Topological waveguides have been extensively studied for their robust transmission properties immune to defects and their application potentials for microwave and terahertz integrated circuits. In this work, by using grounded planar valley-Hall photonic topological insulators, a high-efficiency topological directional coupler fed directly by microstrip line with configurable coupling coefficient i… ▽ More Topological waveguides have been extensively studied for their robust transmission properties immune to defects and their application potentials for microwave and terahertz integrated circuits. In this work, by using grounded planar valley-Hall photonic topological insulators, a high-efficiency topological directional coupler fed directly by microstrip line with configurable coupling coefficient is theoretically proposed and experimentally demonstrated. The topological directional coupler consists of two coupled topological waveguides, which can be directly integrated with microstrip circuits. Different coupling coefficients were achieved by configuring the coupling between the two topological waveguides. Both simulation and measurement demonstrated the proposed designs. In addition, the proposed design is applicable in both microwave and terahertz bands. △ Less

Submitted 7 October, 2022; originally announced October 2022.

A brief review of topological photonics in one, two, and three dimensions

Authors: Zhihao Lan, Menglin L. N. Chen, Fei Gao, Shuang Zhang, Wei E. I. Sha

Abstract: Topological photonics has attracted increasing attention in recent years due to the unique opportunities it provides to manipulate light in a robust way immune to disorder and defects. Up to now, diverse photonic platforms, rich physical mechanisms and fruitful device applications have been proposed for topological photonics, including one-way waveguide, topological lasing, topological nanocavity,… ▽ More Topological photonics has attracted increasing attention in recent years due to the unique opportunities it provides to manipulate light in a robust way immune to disorder and defects. Up to now, diverse photonic platforms, rich physical mechanisms and fruitful device applications have been proposed for topological photonics, including one-way waveguide, topological lasing, topological nanocavity, Dirac and Weyl points, Fermi arcs, nodal lines, etc. In this review, we provide an introduction to the field of topological photonics through the lens of topological invariants and bulk-boundary correspondence in one, two, and three dimensions, which may not only offer a unified understanding about the underlying robustness of diverse and distinct topological phenomena of light, but could also inspire further developments by introducing new topological invariants and unconventional bulk-boundary correspondence to the research of topological photonics. △ Less

Submitted 18 September, 2022; originally announced September 2022.

Comments: 29 pages, 12 figures, 341 references

Journal ref: Reviews in Physics 9, 100076 (2022)

The Potential to Probe Solar Neutrino Physics with LiCl Water Solution

Authors: Wenhui Shao, Weiran Xu, Ye Liang, Wentai Luo, Tong Xu, Ming Qi, Jialiang Zhang, Benda Xu, Zhe Wang, Shaomin Chen

Abstract: Lithium chloride water solution is a good option for solar neutrino detection. The $ν_e$ charged-current (CC) interaction cross-section on $\rm{{}^{7}Li}$ is evaluated with new B(GT) experimental measurements. The total CC interaction cross-section weighted by the solar $^8$B electron neutrino spectrum is $3.759\times10^{-42} \rm{cm}^2$, which is about 60 times that of the neutrino-electron elasti… ▽ More Lithium chloride water solution is a good option for solar neutrino detection. The $ν_e$ charged-current (CC) interaction cross-section on $\rm{{}^{7}Li}$ is evaluated with new B(GT) experimental measurements. The total CC interaction cross-section weighted by the solar $^8$B electron neutrino spectrum is $3.759\times10^{-42} \rm{cm}^2$, which is about 60 times that of the neutrino-electron elastic scattering process. The final state effective kinetic energy after the CC interaction on $\rm{{}^{7}Li}$ directly reflects the neutrino energy, which stands in sharp contrast to the plateau structure of recoil electrons of the elastic scattering. With the high solubility of LiCl of 74.5 g/100 g water at 10$^\circ$C and the high natural abundance of 92.41%, the molarity of $\rm{{}^{7}Li}$ in water can reach 11 mol/L for safe operation at room temperature. The CC event rate of $ν_e$ on $\rm{{}^{7}Li}$ in the LiCl water solution is comparable to that of neutrino-electron elastic scattering. In addition, the $ν_e$ CC interaction with the contained $\rm{{}^{37}Cl}$ also contributes a few percent of the total CC event rate. The contained $\rm{{}^{35}Cl}$ and $\rm{{}^{6}Li}$ also make a delay-coincidence detection for electron antineutrinos possible. The recrystallization method is found to be applicable for LiCl sample purification. The measured attenuation length of $11\pm1$ m at 430 nm shows that the LiCl solution is practicable for a 10-m diameter detector for solar neutrino detection. Clear advantages are found in studying the upturn effect of solar neutrino oscillation, light sterile neutrinos, and Earth matter effect. The sensitivities in discovering solar neutrino upturn and light sterile neutrinos are shown. △ Less

Submitted 28 March, 2022; v1 submitted 3 March, 2022; originally announced March 2022.

Comments: 12 pages, 11 figures

On The Low Speed Limits of Lorentz's Transformation

Authors: Hao Chen, Wei E. I. Sha, Xi Dai, Yue Yu

Abstract: This article contains a digest of the theory of electromagnetism and a review of the transformation between inertial frames, especially under low speed limits. The covariant nature of the Maxwell's equations is explained using the conventional language. We show that even under low speed limits, the relativistic effects should not be neglected to get a self-consistent theory of the electromagnetic… ▽ More This article contains a digest of the theory of electromagnetism and a review of the transformation between inertial frames, especially under low speed limits. The covariant nature of the Maxwell's equations is explained using the conventional language. We show that even under low speed limits, the relativistic effects should not be neglected to get a self-consistent theory of the electromagnetic fields, unless the intrinsic dynamics of these fields has been omitted completely. The quasi-static limits, where the relativistic effects can be partly neglected are also reviewed, to clarify some common misunderstandings and imprecise use of the theory in presence of moving media and other related situations. The discussion presented in this paper provide a clear view of why classical electromagnetic theory is relativistic in its essence. △ Less

Submitted 30 April, 2022; v1 submitted 17 February, 2022; originally announced February 2022.

Comments: 8+10 pages

Journal ref: Progress In Electromagnetics Research, Vol. 174, 1-22, 2022

Plug-Play Plasmonic Metafibers for Ultrafast Fiber Lasers

Authors: Lei Zhang, Huiru Zhang, Ni Tang, Xiren Chen, Fengjiang Liu, Xiaoyu Sun, Hongyan Yu, Xinyu Sun, Qiannan Jia, Boqu Chen, Benoit Cluzel, Philippe Grelu, Aurelien Coillet, Feng Qiu, Lei Ying, Wei Sha, Xiaofeng Liu, Jianrong Qiu, Ding Zhao, Wei Yan, Duanduan Wu, Xiang Shen, Jiyong Wang, Min Qiu

Abstract: Metafibers expand the functionalities of conventional optical fibers to unprecedented nanoscale light manipulations by integrating metasurfaces on the fiber tips, becoming an emerging light-coupling platform for both nanoscience and fiber optics communities. Mostly exploring the isolated bare fibers, current metafibers remain as proof-of-concept demonstrations due to a lack of standard interfaces… ▽ More Metafibers expand the functionalities of conventional optical fibers to unprecedented nanoscale light manipulations by integrating metasurfaces on the fiber tips, becoming an emerging light-coupling platform for both nanoscience and fiber optics communities. Mostly exploring the isolated bare fibers, current metafibers remain as proof-of-concept demonstrations due to a lack of standard interfaces with the universal fiber networks. Here, we develop new methodologies to fabricate well-defined plasmonic metasurfaces directly on the end facets of commercial single mode fiber jumpers using standard planar technologies and provide a first demonstration of their practical applications in the nonlinear optics regime. Featuring plug-play connections with fiber circuitry and arbitrary metasurfaces landscapes, the metafibers with tunable plasmonic resonances are implemented into fiber laser cavities, yielding all-fiber sub-picosecond (minimum 513 fs) soliton mode locked lasers at optical wavelengths of 1.5 micrometer and 2 micrometer, demonstrating their unusual polarimetric nonlinear transfer functions and superior saturation absorption responses. Novel insights into the physical mechanisms behind the saturable absorption of plasmonic metasurfaces are provided. The nanofabrication process flow is compatible with existing cleanroom technologies, offering metafibers an avenue to be a regular member of functionalized fiber components. The work paves the way towards next generation of ultrafast fiber lasers, optical frequency combs, optical neural networks and ultracompact "all-in-fibers" optical systems for sensing, imaging, communications, and many others. △ Less

Submitted 28 September, 2022; v1 submitted 11 January, 2022; originally announced January 2022.

Comments: 27 pages, 15 figures

An Investigation of Libration Heating and the Thermal State of Enceladus's Ice Shell

Authors: Wencheng D. Shao, Francis Nimmo

Abstract: Tidal dissipation is thought to be responsible for the observed high heat loss on Enceladus. Forced librations can enhance tidal dissipation in the ice shell, but how such librations affect the thermal state of Enceladus has not been investigated. Here we investigate the heating effect of forced librations using the model of Van Hoolst et al. (2013), which includes the elasticity of the ice shell.… ▽ More Tidal dissipation is thought to be responsible for the observed high heat loss on Enceladus. Forced librations can enhance tidal dissipation in the ice shell, but how such librations affect the thermal state of Enceladus has not been investigated. Here we investigate the heating effect of forced librations using the model of Van Hoolst et al. (2013), which includes the elasticity of the ice shell. We find that libration heating in the ice shell is insufficient to match the inferred conductive heat loss of Enceladus. This suggests that either Enceladus is not in a thermal steady state, or additional heating mechanisms beneath the ice shell are contributing the bulk of the power. In the presence of such an additional heat source, Enceladus resides in a stable thermal equilibrium, resisting small perturbations to the shell thickness. Our results do not support the occurrence of a runaway melting process proposed by Luan and Goldreich (2017). In our study, the strong dependence of conductive loss on shell thickness stabilizes the thermal state of Enceladus's ice shell. Our study implies that thermal runaway (if it occurred) or episodic heating on Enceladus is unlikely to originate from librations of the ice shell. △ Less

Submitted 13 December, 2021; originally announced December 2021.

Comments: 22 Pages, 5 figures, published in Icarus

Journal ref: Icarus, 114769 (2021)

Local-time Dependence of Chemical Species in the Venusian Mesosphere

Authors: Wencheng D. Shao, Xi Zhang, João Mendonça, Thérèse Encrenaz

Abstract: Observed chemical species in the Venusian mesosphere show local-time variabilities. SO2 at the cloud top exhibits two local maxima over local time, H2O at the cloud top is uniformly distributed, and CO in the upper atmosphere shows a statistical difference between the two terminators. In this study, we investigated these local-time variabilities using a three-dimensional (3D) general circulation m… ▽ More Observed chemical species in the Venusian mesosphere show local-time variabilities. SO2 at the cloud top exhibits two local maxima over local time, H2O at the cloud top is uniformly distributed, and CO in the upper atmosphere shows a statistical difference between the two terminators. In this study, we investigated these local-time variabilities using a three-dimensional (3D) general circulation model (GCM) in combination with a two-dimensional (2D) chemical transport model (CTM). Our simulation results agree with the observed local-time patterns of SO2, H2O, and CO. The two-maximum pattern of SO2 at the cloud top is caused by the superposition of the semidiurnal thermal tide and the retrograde superrotating zonal (RSZ) flow. SO2 above 85 km shows a large day-night difference resulting from both photochemistry and the sub-solar to anti-solar (SS-AS) circulation. The transition from the RSZ flows to SS-AS circulation can explain the CO difference between two terminators and the displacement of the CO local-time maximum with respect to the anti-solar point. H2O is long-lived and exhibits very uniform distribution over space. We also present the local-time variations of HCl, ClO, OCS and SO simulated by our model and compare to the sparse observations of these species. This study highlights the importance of multidimensional CTMs for understanding the interaction between chemistry and dynamics in the Venusian mesosphere. △ Less

Submitted 13 December, 2021; originally announced December 2021.

Comments: 51 pages, 19 figures, accepted by Planetary Science Journal

Comparative study of Hermitian and non-Hermitian topological dielectric photonic crystals

Authors: Menglin L. N. Chen, Li Jun Jiang, Shuang Zhang, Ran Zhao, Zhihao Lan, Wei E. I. Sha

Abstract: The effects of gain and loss on the band structures of a bulk topological dielectric photonic crystal (PC) with $C_{6v}$ symmetry and the PC-air-PC interface are studied based on first-principle calculation. To illustrate the importance of parity-time (PT) symmetry, three systems are considered, namely the PT-symmetric, PT-asymmetric, and lossy systems. We find that the system with gain and loss d… ▽ More The effects of gain and loss on the band structures of a bulk topological dielectric photonic crystal (PC) with $C_{6v}$ symmetry and the PC-air-PC interface are studied based on first-principle calculation. To illustrate the importance of parity-time (PT) symmetry, three systems are considered, namely the PT-symmetric, PT-asymmetric, and lossy systems. We find that the system with gain and loss distributed in a PT symmetric manner exhibits a phase transition from a PT exact phase to a PT broken phase as the strength of the gain and loss increases, while for the PT-asymmetric and lossy systems, no such phase transition occurs. Furthermore, based on the Wilson loop calculation, the topology of the PT-symmetric system in the PT exact phase is demonstrated to keep unchanged as the Hermitian system. At last, different kinds of edge states in Hermitian systems under the influences of gain and loss are studied and we find that while the eigenfrequencies of nontrivial edge states become complex conjugate pairs, they keep real for the trivial defect states. △ Less

Submitted 6 January, 2022; v1 submitted 12 September, 2021; originally announced September 2021.

Comments: 6 pages, 6 figures

Journal ref: Physical Review A, 2021

Approaching the Fundamental Limit of Orbital Angular Momentum Multiplexing Through a Hologram Metasurface

Authors: Shuai S. A. Yuan, Jie Wu, Menglin L. N. Chen, Zhihao Lan, Liang Zhang, Sheng Sun, Zhixiang Huang, Xiaoming Chen, Shilie Zheng, Li Jun Jiang, Xianmin Zhang, Wei E. I. Sha

Abstract: Establishing and approaching the fundamental limit of orbital angular momentum (OAM) multiplexing are necessary and increasingly urgent for current multiple-input multiple-output research. In this work, we elaborate the fundamental limit in terms of independent scattering channels (or degrees of freedom of scattered fields) through angular-spectral analysis, in conjunction with a rigorous Green fu… ▽ More Establishing and approaching the fundamental limit of orbital angular momentum (OAM) multiplexing are necessary and increasingly urgent for current multiple-input multiple-output research. In this work, we elaborate the fundamental limit in terms of independent scattering channels (or degrees of freedom of scattered fields) through angular-spectral analysis, in conjunction with a rigorous Green function method. The scattering channel limit is universal for arbitrary spatial mode multiplexing, which is launched by a planar electromagnetic device, such as antenna, metasurface, etc, with a predefined physical size. As a proof of concept, we demonstrate both theoretically and experimentally the limit by a metasurface hologram that transforms orthogonal OAM modes to plane-wave modes scattered at critically separated angular-spectral regions. Particularly, a minimax optimization algorithm is applied to suppress angular spectrum aliasing, achieving good performances in both full-wave simulation and experimental measurement at microwave frequencies. This work offers a theoretical upper bound and corresponding approach route for engineering designs of OAM multiplexing. △ Less

Submitted 1 January, 2022; v1 submitted 29 June, 2021; originally announced June 2021.

Journal ref: Physical Review Applied, 2021

Geodesic Density Regression for Correcting 4DCT Pulmonary Respiratory Motion Artifacts

Authors: Wei Shao, Yue Pan, Oguz C. Durumeric, Joseph M. Reinhardt, John E. Bayouth, Mirabela Rusu, Gary E. Christensen

Abstract: Pulmonary respiratory motion artifacts are common in four-dimensional computed tomography (4DCT) of lungs and are caused by missing, duplicated, and misaligned image data. This paper presents a geodesic density regression (GDR) algorithm to correct motion artifacts in 4DCT by correcting artifacts in one breathing phase with artifact-free data from corresponding regions of other breathing phases. T… ▽ More Pulmonary respiratory motion artifacts are common in four-dimensional computed tomography (4DCT) of lungs and are caused by missing, duplicated, and misaligned image data. This paper presents a geodesic density regression (GDR) algorithm to correct motion artifacts in 4DCT by correcting artifacts in one breathing phase with artifact-free data from corresponding regions of other breathing phases. The GDR algorithm estimates an artifact-free lung template image and a smooth, dense, 4D (space plus time) vector field that deforms the template image to each breathing phase to produce an artifact-free 4DCT scan. Correspondences are estimated by accounting for the local tissue density change associated with air entering and leaving the lungs, and using binary artifact masks to exclude regions with artifacts from image regression. The artifact-free lung template image is generated by mapping the artifact-free regions of each phase volume to a common reference coordinate system using the estimated correspondences and then averaging. This procedure generates a fixed view of the lung with an improved signal-to-noise ratio. The GDR algorithm was evaluated and compared to a state-of-the-art geodesic intensity regression (GIR) algorithm using simulated CT time-series and 4DCT scans with clinically observed motion artifacts. The simulation shows that the GDR algorithm has achieved significantly more accurate Jacobian images and sharper template images, and is less sensitive to data dropout than the GIR algorithm. We also demonstrate that the GDR algorithm is more effective than the GIR algorithm for removing clinically observed motion artifacts in treatment planning 4DCT scans. Our code is freely available at https://github.com/Wei-Shao-Reg/GDR. △ Less

Submitted 12 June, 2021; originally announced June 2021.

Comments: Accepted to the journal Medical Image Analysis (MedIA)

MSC Class: 92C55

Charge Transfer as the Key Parameter Affecting Color Purity of TADF Emitters

Authors: Ramin Ansari, Wenhao Shao, Seong-Jun Yoon, Jinsang Kim, John Kieffer

Abstract: The key factors determining the emission bandwidth of thermally activated delayed fluorescence (TADF) are investi-gated by combining computational and experimental approaches. To achieve high internal quantum efficiencies (IQEs) in metal-free organic light emitting diode via TADF, the first triplet (T1) to first singlet (S1) reverse intersystem crossing (rISC) is promoted by configuring molecules… ▽ More The key factors determining the emission bandwidth of thermally activated delayed fluorescence (TADF) are investi-gated by combining computational and experimental approaches. To achieve high internal quantum efficiencies (IQEs) in metal-free organic light emitting diode via TADF, the first triplet (T1) to first singlet (S1) reverse intersystem crossing (rISC) is promoted by configuring molecules in an electron donor-acceptor (D-A) alternation with a large di-hedral angle, which results in a small energy gap (ΔEST) between S1 and T1 levels. This allows for effective non-radiative up-conversion of triplet excitons to singlet excitons that fluoresce. However, this traditional molecular de-sign of TADF results in broad emission spectral bands (full-width at half-maximum = 70-100 nm). Despite reports suggesting that suppressing the D-A dihedral rotation narrows the emission band, the origin of emission broadening remains elusive. Indeed, our results suggest that the intrinsic TADF emission bandwidth is primarily determined by the charge transfer character of the molecule, rather than its propensity for rotational motion, which offers a renewed perspective on the rational molecular design of organic emitters exhibiting sharp emission spectra. △ Less

Submitted 6 May, 2021; originally announced May 2021.

Comments: 11 pages, 6 figures, 2 tables

Loss Mechanism Analyses of Perovskite Solar Cells with an Equivalent Circuit Model

Authors: Ting Xu, Zi-Shuai Wang, Xuan-Hua Li, Wei E. I. Sha

Abstract: Understanding and quantifying the main loss factors affecting the power conversion efficiency of perovskite solar cells are urgently needed. In this work, based on semiconductor physics, the expressions of bulk and surface recombination currents are analytically derived. Then taking the optical loss, series and shunt resistance losses, and bulk and surface recombination losses into consideration,… ▽ More Understanding and quantifying the main loss factors affecting the power conversion efficiency of perovskite solar cells are urgently needed. In this work, based on semiconductor physics, the expressions of bulk and surface recombination currents are analytically derived. Then taking the optical loss, series and shunt resistance losses, and bulk and surface recombination losses into consideration, an equivalent circuit model is proposed to describe the current density-voltage characteristics of practical perovskite solar cells. Furthermore, by comparing to the drift-diffusion model, the pre-defined physical parameters of the drift-diffusion model well agree with the fitting parameters retrieved by the equivalent circuit model, which verifies the reliability of the proposed model. Moreover, when the circuit model is applied to analyze experimental results, the fitting outcomes show favorable consistency to the physical investigations offered by the experiments. And the relative fitting errors of the above cases are all less than 2%. Through employing the model, the dominant recombination type is clearly identified and split current density-voltage curves characterizing different loss mechanisms are offered, which intuitively reveals the physical principles of efficiency loss. Additionally, through calculating the efficiency loss ratios under the open-circuit voltage condition, quantifying the above-mentioned loss mechanisms becomes simple and compelling. Consequently, this model offers a guideline to approach the efficiency limit from a circuit-level perspective. And the model is a comprehensive simulation and analysis tool for understanding the device physics of perovskite solar cells. △ Less

Submitted 20 March, 2021; originally announced March 2021.

Comments: 17 pages, 7 figures

Journal ref: Acta Physica Sinica 70: 098801, 2021

Manipulation of Orbital Angular Momentum Spectrum Using Shape-Tailored Metasurfaces

Authors: Ling-Jun Yang, Sheng Sun, Wei E. I. Sha

Abstract: Vortex beams carrying orbital angular momentum (OAM) have been widely applied in various electromagnetic, optical, and quantum systems. A tailored OAM spectrum composed of several specific modes as expected holds a promise for expanding the degrees of freedom of the systems. However, such a broadband high-purity tailored spectrum is difficult to be achieved by the present devices, where the broadb… ▽ More Vortex beams carrying orbital angular momentum (OAM) have been widely applied in various electromagnetic, optical, and quantum systems. A tailored OAM spectrum composed of several specific modes as expected holds a promise for expanding the degrees of freedom of the systems. However, such a broadband high-purity tailored spectrum is difficult to be achieved by the present devices, where the broadband amplitude manipulation has not been explored yet. In this work, inspired by the envelope-modulation theory, an elegant and universal way to manipulate the OAM spectrum in wide bandwidth is proposed by using a shape-tailored metasurface. Firstly, the rotating meta-atoms on a triangular lattice are proved to have smaller coupling distortion than that on a square lattice, and this behavior is critical for high-purity vortex spectrum generation by the Pancharatnam-Berry-based metasurfaces. Secondly, a universal modulation relation is established between the spatial arrangement of metasurfaces and the generated vortex beams. Finally, the broadband modulated OAM spectra and the comb-like OAM spectra are theoretically and experimentally demonstrated by the shape-tailored metasurfaces. The proposed amplitude-modulation scheme offers a novel concept and engineering route to manipulate the OAM spectrum in wide bandwidth, which could promote the development of OAM-based applications. △ Less

Submitted 26 January, 2021; originally announced March 2021.

Coupled cavity-waveguide system based on topological corner state and edge state

Authors: Aoqian Shi, Bei Yan, Rui Ge, Jianlan Xie, Yuchen Peng, Hang Li, Wei E. I. Sha, Jianjun Liu

Abstract: Topological corner state (TCS) and topological edge state (TES) have provided new approaches to control the propagation of light. The construction of topological coupled cavity-waveguide system (TCCWS) based on TCS and TES is worth looking forward to, due to its research prospects in realizing high-performance micro-nano integrated photonic devices. In this Letter, TCCWS is proposed in two-dimensi… ▽ More Topological corner state (TCS) and topological edge state (TES) have provided new approaches to control the propagation of light. The construction of topological coupled cavity-waveguide system (TCCWS) based on TCS and TES is worth looking forward to, due to its research prospects in realizing high-performance micro-nano integrated photonic devices. In this Letter, TCCWS is proposed in two-dimensional (2D) photonic crystal (PC), which possesses strong optical localization, high quality factor and excellent robustness compared with the conventional coupled cavity-waveguide system (CCCWS). This work will provide the possibility to design high-performance logic gates, lasers, filters and other micro-nano integrated photonics devices and expand their applications. △ Less

Submitted 4 January, 2021; v1 submitted 26 December, 2020; originally announced December 2020.

Journal ref: Optics Letters, 46(5): 1089-1092 (2021)

Coexistence of pseudospin- and valley-Hall-like edge states in a photonic crystal with $C_{3v}$ symmetry

Authors: Menglin L. N. Chen, Li Jun Jiang, Zhihao Lan, Wei E. I. Sha

Abstract: We demonstrate the coexistence of pseudospin- and valley-Hall-like edge states in a photonic crystal with $C_{3v}$ symmetry, which is composed of three interlacing triangular sublattices with the same lattice constants. By tuning the geometry of the sublattices, three complete photonic band gaps with nontrivial topology can be created, one of which is due to the band inversion associated with the… ▽ More We demonstrate the coexistence of pseudospin- and valley-Hall-like edge states in a photonic crystal with $C_{3v}$ symmetry, which is composed of three interlacing triangular sublattices with the same lattice constants. By tuning the geometry of the sublattices, three complete photonic band gaps with nontrivial topology can be created, one of which is due to the band inversion associated with the pseudospin degree of freedom at the $Γ$ point and the other two due to the gapping out of Dirac cones associated with the valley degree of freedom at the $K, K'$ points. The system can support tri-band pseudospin- and valley-momentum locking edge states at properly designed domain-wall interfaces. Furthermore, to demonstrate the novel interplay of the two kinds of edge states in a single configuration, we design a four-channel system, where the unidirectional routing of electromagnetic waves against sharp bends between two routes can be selectively controlled by the pseudospin and valley degrees of freedom. Our work combines the pseudospin and valley degrees of freedom in a single configuration and may provide more flexibility in manipulating electromagnetic waves with promising potential for multiband and multifunctional applications. △ Less

Submitted 3 November, 2020; originally announced November 2020.

Comments: 6 pages, 5 figures

Journal ref: Physical Review Research, 2020

Multiplexing-oriented plasmon-MoS2 hybrid metasurfaces driven by nonlinear quasi bound states in the continuum

Authors: Qun Ren, Feng Feng, Xiang Yao, Quan Xu, Zhihao Lan, Jianwei You, Xiaofei Xiao, Wei E. I. Sha, Ming Xin

Abstract: Rapid progress in nonlinear plasmonic metasurfaces enabled many novel optical characteristics for metasurfaces, with potential applications in frequency metrology, timing characterization and quantum information. However, the spectrum of nonlinear optical response was typically based upon the linear optical resonance. In this work, a wavelength-multiplexed nonlinear plasmon-MoS2 hybrid metasurface… ▽ More Rapid progress in nonlinear plasmonic metasurfaces enabled many novel optical characteristics for metasurfaces, with potential applications in frequency metrology, timing characterization and quantum information. However, the spectrum of nonlinear optical response was typically based upon the linear optical resonance. In this work, a wavelength-multiplexed nonlinear plasmon-MoS2 hybrid metasurface with suppression phenomenon was proposed, where multiple nonlinear signals could to be simultaneously processed and optionally tuned. A clear physical picture to depict the nonlinear plasmonic bound states in the continuum (BICs) was presented, from the perspective of both classical and quantum approaches. Particularly, beyond the ordinary plasmon-polariton effect, we numerically demonstrated a giant BIC-inspired second-order nonlinear susceptibility $10^{-5}$~$m/V$ of MoS2 in the infrared band. The novelty in our study lies in the presence of a quantum oscillator that can be adopted to both suppress and enhance the nonlinear quasi BICs. This selectable nonlinear BIC-based suppression and enhancement effect can optionally block undesired modes, resulting in narrower linewidth as well as smaller quantum decay rates, which is also promising in slow-light-associated technologies. △ Less

Submitted 11 November, 2020; v1 submitted 25 August, 2020; originally announced August 2020.

Muon Flux Measurement at China Jinping Underground Laboratory

Authors: Ziyi Guo, Lars Bathe-Peters, Shaomin Chen, Mourad Chouaki, Wei Dou, Lei Guo, Ghulam Hussain, Jinjing Li, Qian Liu, Guang Luo, Wentai Luo, Ming Qi, Wenhui Shao, Jian Tang, Linyan Wan, Zhe Wang, Benda Xu, Tong Xu, Weiran Xu, Yuzi Yang, Minfang Yeh, Lin Zhao

Abstract: China Jinping Underground Laboratory (CJPL) is ideal for studying solar-, geo-, and supernova neutrinos. A precise measurement of the cosmic-ray background would play an essential role in proceeding with the R\&D research for these MeV-scale neutrino experiments. Using a 1-ton prototype detector for the Jinping Neutrino Experiment (JNE), we detected 264 high-energy muon events from a 645.2-day dat… ▽ More China Jinping Underground Laboratory (CJPL) is ideal for studying solar-, geo-, and supernova neutrinos. A precise measurement of the cosmic-ray background would play an essential role in proceeding with the R\&D research for these MeV-scale neutrino experiments. Using a 1-ton prototype detector for the Jinping Neutrino Experiment (JNE), we detected 264 high-energy muon events from a 645.2-day dataset at the first phase of CJPL (CJPL-I), reconstructed their directions, and measured the cosmic-ray muon flux to be $(3.53\pm0.22_{\text{stat.}}\pm0.07_{\text{sys.}})\times10^{-10}$ cm$^{-2}$s$^{-1}$. The observed angular distributions indicate the leakage of cosmic-ray muon background and agree with the simulation accounting for Jinping mountain's terrain. A survey of muon fluxes at different laboratory locations situated under mountains and below mine shaft indicated that the former is generally a factor of $(4\pm2)$ larger than the latter with the same vertical overburden. This study provides a convenient back-of-the-envelope estimation for muon flux of an underground experiment. △ Less

Submitted 13 October, 2020; v1 submitted 31 July, 2020; originally announced July 2020.

Journal ref: Chin.Phys.C 45 (2021) 2, 025001

Second-harmonic generation via double topological valley-Hall kink modes in all-dielectric photonic crystals

Authors: Zhihao Lan, Jian Wei You, Qun Ren, Wei E. I. Sha, Nicolae C. Panoiu

Abstract: Nonlinear topological photonics, which explores topics common to the fields of topological phases and nonlinear optics, is expected to open up a new paradigm in topological photonics. Here, we demonstrate second-harmonic generation (SHG) via nonlinear interaction of double topological valley-Hall kink modes in all-dielectric photonic crystals (PhCs). We first show that two topological frequency ba… ▽ More Nonlinear topological photonics, which explores topics common to the fields of topological phases and nonlinear optics, is expected to open up a new paradigm in topological photonics. Here, we demonstrate second-harmonic generation (SHG) via nonlinear interaction of double topological valley-Hall kink modes in all-dielectric photonic crystals (PhCs). We first show that two topological frequency bandgaps can be created around a pair of frequencies, $ω_0$ and $2ω_0$, by gapping out the corresponding Dirac points in two-dimensional honeycomb PhCs. Valley-Hall kink modes along a kink-type domain wall interface between two PhCs placed together in a mirror-symmetric manner are generated within the two frequency bandgaps. Importantly, through full-wave simulations and mode dispersion analysis, we demonstrate that tunable, bi-directional phase-matched SHG via nonlinear interaction of the valley-Hall kink modes inside the two bandgaps can be achieved. In particular, by using Stokes parameters associated to the magnetic part of the valley-Hall kink modes, we introduce a new concept, SHG directional dichroism, which is employed to characterize optical probes for sensing chiral molecules. Our work opens up new avenues towards topologically protected nonlinear frequency mixing and active photonic devices implemented in all-dielectric material platforms. △ Less

Submitted 7 April, 2021; v1 submitted 9 July, 2020; originally announced July 2020.

Comments: 6 pages, 5 figures

Journal ref: Phys. Rev. A 103, 041502 (2021)

Revisiting the Sulfur-Water Chemical System in the Middle Atmosphere of Venus

Authors: Wencheng D. Shao, Xi Zhang, Carver J. Bierson, Therese Encrenaz

Abstract: Sulfur-water chemistry plays an important role in the middle atmosphere of Venus. Ground based observations have found that simultaneously observed SO2 and H2O at ~64 km vary with time and are temporally anti-correlated. To understand these observations, we explore the sulfur-water chemical system using a one-dimensional chemistry-diffusion model. We find that SO2 and H2O mixing ratios above the c… ▽ More Sulfur-water chemistry plays an important role in the middle atmosphere of Venus. Ground based observations have found that simultaneously observed SO2 and H2O at ~64 km vary with time and are temporally anti-correlated. To understand these observations, we explore the sulfur-water chemical system using a one-dimensional chemistry-diffusion model. We find that SO2 and H2O mixing ratios above the clouds are highly dependent on mixing ratios of the two species at the middle cloud top (58 km). The behavior of sulfur-water chemical system can be classified into three regimes but there is no abrupt transition among these regimes. In particular, there is no bifurcation behavior as previously claimed. We also find that the SO2 self-shielding effect causes H2O above the clouds to respond to the middle cloud top in a non-monotonic fashion. Through comparison with observations, we find that mixing ratio variations at the middle cloud top can explain the observed variability of SO2 and H2O. The sulfur-water chemistry in the middle atmosphere is responsible for the H2O-SO2 anti-correlation at 64 km. Eddy transport change alone cannot explain the variations of both species. These results imply that variations of species abundance in the middle atmosphere are significantly influenced by the lower atmospheric processes. Continued ground-based measurements of the co-evolution of SO2 and H2O above the clouds and new spacecraft missions will be crucial for uncover the complicated processes underlying the interaction among the lower atmosphere, the clouds and the middle atmosphere of Venus. △ Less

Submitted 16 June, 2020; originally announced June 2020.

Comments: 26 pages, 8 figures. The manuscript has been accepted by JGR-Planets

Local orbital-angular-momentum dependent surface states with topological protection

Authors: Menglin L. N. Chen, Li Jun Jiang, Zhihao Lan, Wei E. I. Sha

Abstract: Chiral surface states along the zigzag edge of a valley photonic crystal in the honeycomb lattice are demonstrated. By decomposing the local fields into orbital angular momentum (OAM) modes, we find that the chiral surface states present OAM-dependent unidirectional propagation characteristics. Particularly, the propagation directivities of the surface states are quantified by the local OAM decomp… ▽ More Chiral surface states along the zigzag edge of a valley photonic crystal in the honeycomb lattice are demonstrated. By decomposing the local fields into orbital angular momentum (OAM) modes, we find that the chiral surface states present OAM-dependent unidirectional propagation characteristics. Particularly, the propagation directivities of the surface states are quantified by the local OAM decomposition and are found to depend on the chiralities of both the source and surface states. These findings allow for the engineering control of the unidirectional propagation of electromagnetic energy without requiring an ancillary cladding layer. Furthermore, we examine the propagation of the chiral surface states against sharp bends. It turns out that although only certain states successfully pass through the bend, the unidirectional propagation is well maintained due to the topology of the structure. △ Less

Submitted 11 May, 2020; originally announced May 2020.

Comments: 9 pages, 6 figures

Journal ref: Optics Express,2020

First-principle calculation of Chern number in gyrotropic photonic crystals

Authors: Ran Zhao, Guo-Da Xie, Menglin L. N. Chen, Zhihao Lan, Zhixiang Huang, Wei E. I. Sha

Abstract: As an important figure of merit for characterizing the quantized collective behaviors of the wavefunction, Chern number is the topological invariant of quantum Hall insulators. Chern number also identifies the topological properties of the photonic topological insulators (PTIs), thus it is of crucial importance in PTI design. In this paper, we develop a first principle computatioal method for the… ▽ More As an important figure of merit for characterizing the quantized collective behaviors of the wavefunction, Chern number is the topological invariant of quantum Hall insulators. Chern number also identifies the topological properties of the photonic topological insulators (PTIs), thus it is of crucial importance in PTI design. In this paper, we develop a first principle computatioal method for the Chern number of 2D gyrotropic photonic crystals (PCs), starting from the Maxwell's equations. Firstly, we solve the Hermitian generalized eigenvalue equation reformulated from the Maxwell's equations by using the full-wave finite-difference frequency-domain (FDFD) method. Then the Chern number is obtained by calculating the integral of Berry curvature over the first Brillouin zone. Numerical examples of both transverse-electric (TE) and transverse-magnetic (TM) modes are demonstrated, where convergent Chern numbers can be obtained using rather coarse grids, thus validating the efficiency and accuracy of the proposed method. △ Less

Submitted 24 January, 2020; originally announced January 2020.

Comments: 13 pages, 6 figures

Journal ref: Optics Express, 2020

Miniature Probe for Optomechanical Focus-adjustable Optical-resolution Photoacoustic Endoscopy

Authors: Zhendong Guo, Zhanhong Ye, Weihao Shao, Lili Jing, Sung-Liang Chen

Abstract: Photoacoustic microscopy (PAM) is a promising imaging modality because it is able to reveal optical absorption contrast in high resolution on the order of a micrometer. It can be applied in an endoscopic approach by implementing PAM into a miniature probe, termed as photoacoustic endoscopy (PAE). Here we develop a miniature focus-adjustable PAE (FA-PAE) probe characterized by both high resolution… ▽ More Photoacoustic microscopy (PAM) is a promising imaging modality because it is able to reveal optical absorption contrast in high resolution on the order of a micrometer. It can be applied in an endoscopic approach by implementing PAM into a miniature probe, termed as photoacoustic endoscopy (PAE). Here we develop a miniature focus-adjustable PAE (FA-PAE) probe characterized by both high resolution (in micrometers) and large depth of focus (DOF) via a novel optomechanical design for focus adjustment. To realize high resolution and large DOF in a miniature probe, a 2-mm plano-convex lens is specially adopted, and the mechanical translation of a single-mode fiber is meticulously designed to allow the use of multi-focus image fusion (MIF) for extended DOF. Compared with existing PAE probes, our FA-PAE probe achieves high resolution of 3-5 μm within unprecedentedly large DOF of >3.2 mm, more than 27 times the DOF of the probe without performing focus adjustment for MIF. The superior performance is demonstrated by imaging both phantoms and animals including mice and zebrafishes in vivo. Our work opens new perspectives for PAE biomedical applications. △ Less

Submitted 20 November, 2019; originally announced November 2019.

Ultra-wideband Reflection-type Metasurface for Generating Integer and Fractional Orbital Angular Momentum

Authors: Ling-Jun Yang, Sheng Sun, Wei E. I. Sha

Abstract: Vortex beams carrying orbital angular momentum are extensively studied owing to its potential to expand channel capacity of microwave and optical communication. By utilizing the Pancharatnam-Berry phase concept, an ultra-wideband single layer metasurface is proposed to realize the conversion from incident plane waves to reflected vortex beams covering a considerable bandwidth from 6.75 to 21.85 GH… ▽ More Vortex beams carrying orbital angular momentum are extensively studied owing to its potential to expand channel capacity of microwave and optical communication. By utilizing the Pancharatnam-Berry phase concept, an ultra-wideband single layer metasurface is proposed to realize the conversion from incident plane waves to reflected vortex beams covering a considerable bandwidth from 6.75 to 21.85 GHz . An equivalent circuit model combined with broadband phase shift network is developed to effectively design the meta-atoms in metasurface. It is the first time to design wideband metasurfaces with the phase-based characteristics. To verify the proposed model, some deformed square loop meta-atoms are proposed to construct the metasurfaces with broadband OAM characteristic. Moreover, the vortex beams with the integer (l = -3), fractional (l = -1.5), and high-order (l = -10) OAM mode are generated respectively. Based on an OAM spectral analysis, the mode purity of the generated vortex waves is discussed in detail. The experimental results achieve a good agreement with those obtained from the simulation, thus proving the effectiveness and practicability of the proposed method. △ Less

Submitted 4 November, 2019; originally announced November 2019.

Comments: 10 pages, 12 figures

Journal ref: IEEE Transactions on Antennas and Propagation,2019