Showing 1–11 of 11 results for author: Serrano-Ruiz, M

Melting curve of black phosphorus: evidence for a solid-liquid-liquid triple point

Authors: Hermann Muhammad, Mohamed Mezouar, Gaston Garbarino, Laura Henry, Tomasz Poręba, Matteo Ceppatelli, Manuel Serrano-Ruiz, Maurizio Peruzzini, Frédéric Datchi

Abstract: Black phosphorus (bP) is a crystalline material that can be seen as ordered stackings of two-dimensional layers, which lead to outstanding anisotropic physical properties. The knowledge of its pressure-temperature (P-T) phase diagram, and in particular, the slope and location of its melting curve is fundamental for better understanding the synthesis and stability conditions of this important mater… ▽ More Black phosphorus (bP) is a crystalline material that can be seen as ordered stackings of two-dimensional layers, which lead to outstanding anisotropic physical properties. The knowledge of its pressure-temperature (P-T) phase diagram, and in particular, the slope and location of its melting curve is fundamental for better understanding the synthesis and stability conditions of this important material. Despite several experimental studies, important uncertainties remain in the determination of this melting curve. Here we report accurate melting points measurements, using in situ high-temperature and high-pressure high-resolution synchrotron x-ray diffraction. In particular, we have employed an original and accurate pressure and temperature metrology based on the unique anisotropic P-T response of bP, that we used as sensor for the simultaneous determination of pressure and temperature up to 5 GPa and 1700 K. We confirmed the existence of and located a solid-liquid-liquid triple point at the intersection of the low- and high-pressure melting curves. Finally, we have characterized the irreversibility of the transformation in the low-pressure regime below 1 GPa, as the low-density liquid does not crystallize back to bP but into red phosphorus on temperature quenching. △ Less

Submitted 29 November, 2023; originally announced November 2023.

Propagation of Visible Light in Nanostructured Niobium Stripes Embedded in a Dielectric Polymer

Authors: F. Telesio, F. Mezzadri, M. Serrano-Ruiz, M. Peruzzini, F. Bisio, S. Heun, F. Fabbri

Abstract: Nanometric metallic stripes allow the transmission of optical signals via the excitation and propagation of surface-localized evanescent electromagnetic waves, with important applications in the field of nano-photonics. Whereas this kind of plasmonic phenomena typically exploits noble metals, like Ag or Au, other materials can exhibit viable light-transport efficiency. In this work, we demonstrate… ▽ More Nanometric metallic stripes allow the transmission of optical signals via the excitation and propagation of surface-localized evanescent electromagnetic waves, with important applications in the field of nano-photonics. Whereas this kind of plasmonic phenomena typically exploits noble metals, like Ag or Au, other materials can exhibit viable light-transport efficiency. In this work, we demonstrate the transport of visible light in nanometric niobium stripes coupled with a dielectric polymeric layer, exploiting the remotely-excited/detected Raman signal of black phosphorus (bP) as the probe. The light-transport mechanism is ascribed to the generation of surface plasmon polaritons at the Nb/polymer interface. The propagation length is limited due to the lossy nature of niobium in the optical range, but this material may allow the exploitation of specific functionalities that are absent in noble-metal counterparts. △ Less

Submitted 23 December, 2022; originally announced December 2022.

Comments: 18 pages, 6 figures; supporting information 7 pages, 9 figures

Journal ref: Mater. Quantum. Technol. 2 045003 (2022)

Enhanced ambient stability of exfoliated black phosphorus by passivation with nickel nanoparticles

Authors: Maria Caporali, Manuel Serrano-Ruiz, Francesca Telesio, Stefan Heun, Alberto Verdini, Albano Cossaro, Matteo Dal Miglio, Andrea Goldoni, Maurizio Peruzzini

Abstract: Since its discovery, the environmental instability of exfoliated black phosphorus (2D bP) has emerged as a challenge that hampers its wide application in chemistry, physics, and materials science. Many studies have been carried out to overcome this drawback. Here we show a relevant enhancement of ambient stability in few-layer bP decorated with nickel nanoparticles as compared to pristine bP. In d… ▽ More Since its discovery, the environmental instability of exfoliated black phosphorus (2D bP) has emerged as a challenge that hampers its wide application in chemistry, physics, and materials science. Many studies have been carried out to overcome this drawback. Here we show a relevant enhancement of ambient stability in few-layer bP decorated with nickel nanoparticles as compared to pristine bP. In detail, the behavior of the Ni-functionalized material exposed to ambient conditions in the dark is accurately studied by TEM (Transmission Electron Microscopy), Raman Spectroscopy, and high resolution X-ray Photoemission and Absorption Spectroscopy. These techniques provide a morphological and quantitative insight of the oxidation process taking place at the surface of the bP flakes. In the presence of Ni NPs, the decay time of 2D bP to phosphorus oxides is more than three time slower compared to pristine bP, demonstrating an improved structural stability within twenty months of observation. △ Less

Submitted 1 August, 2019; originally announced August 2019.

Journal ref: Nanotechnology 31 (2020) 275708

A Perspective on Recent Advances in Phosphorene Functionalization and its Application in Devices

Authors: Maurizio Peruzzini, Roberto Bini, Margherita Bolognesi, Maria Caporali, Matteo Ceppatelli, Francesca Cicogna, Serena Coiai, Stefan Heun, Andrea Ienco, Inigo Iglesias Benito, Abhishek Kumar, Gabriele Manca, Elisa Passaglia, Demetrio Scelta, Manuel Serrano-Ruiz, Francesca Telesio, Stefano Toffanin, Matteo Vanni

Abstract: Phosphorene, the 2D material derived from black phosphorus, has recently attracted a lot of interest for its properties, suitable for applications in material science. In particular, the physical features and the prominent chemical reactivity on its surface render this nanolayered substrate particularly promising for electrical and optoelectronic applications. In addition, being a new potential li… ▽ More Phosphorene, the 2D material derived from black phosphorus, has recently attracted a lot of interest for its properties, suitable for applications in material science. In particular, the physical features and the prominent chemical reactivity on its surface render this nanolayered substrate particularly promising for electrical and optoelectronic applications. In addition, being a new potential ligand for metals, it opens the way for a new role of the inorganic chemistry in the 2D world, with special reference to the field of catalysis. The aim of this review is to summarize the state of the art in this subject and to present our most recent results in preparation, functionalization and use of phosphorene and its decorated derivatives. In particular, we discuss several key points, which are currently under investigation: the synthesis, the characterization by theoretical calculations, the high pressure behaviour of black phosphorus, as well as decoration with nanoparticles and encapsulation in polymers. Finally, device fabrication and electrical transport measurements are overviewed on the basis of recent literature and new results collected in our laboratories. △ Less

Submitted 28 March, 2019; originally announced March 2019.

Journal ref: Eur. J. Inorg. Chem. 2019, 1476 - 1494

Black Phosphorus/Palladium Nanohybrid: Unraveling the Nature of P-Pd Interaction and Application in Selective Hydrogenation

Authors: Matteo Vanni, Manuel Serrano-Ruiz, Francesca Telesio, Stefan Heun, Martina Banchelli, Paolo Matteini, Antonio Massilimiliano Mio, Giuseppe Nicotra, Corrado Spinella, Stefano Caporali, Andrea Giaccherini, Francesco d'Acapito, Maria Caporali, Maurizio Peruzzini

Abstract: The burgeoning interest in 2D black phosphorus (bP) contributes to expand its applications in countless fields. In the present study, 2D bP is used as a support for homogeneously dispersed palladium nanoparticles directly grown on it by a wet chemical process. EELS-STEM analysis evidences a strong interaction between palladium and P atoms of bP nanosheets. A quantitative evaluation of this interac… ▽ More The burgeoning interest in 2D black phosphorus (bP) contributes to expand its applications in countless fields. In the present study, 2D bP is used as a support for homogeneously dispersed palladium nanoparticles directly grown on it by a wet chemical process. EELS-STEM analysis evidences a strong interaction between palladium and P atoms of bP nanosheets. A quantitative evaluation of this interaction comes from XAS measurements that find out a very short Pd-P distance of 2.26 Å proving for the first time the existence of an unprecedented Pd-P coordination bond of covalent nature. Additionally, the average Pd-P coordination number of about 1.7 reveals that bP acts as a polydentate phosphine ligand towards the surface Pd atoms of the nanoparticles, thus preventing their agglomeration and inferring structural stability. These unique properties result in a superior performance in the catalytic hydrogenation of chloronitroarenes to chloroaniline, where a higher chemoselectivity in comparison to other heterogeneous catalyst based on palladium has been observed. △ Less

Submitted 6 March, 2019; originally announced March 2019.

Journal ref: Chem. Mater. 2019, 31, 5075-5080

STM Study of Exfoliated Few Layer Black Phosphorus Annealed in Ultrahigh Vacuum

Authors: Abhishek Kumar, F. Telesio, S. Forti, A. Al-Temimy, C. Coletti, M. Serrano-Ruiz, M. Caporali, M. Peruzzini, F. Beltram, S. Heun

Abstract: Black Phosphorus (bP) has emerged as an interesting addition to the category of two-dimensional materials. Surface-science studies on this material are of great interest, but they are hampered by bP's high reactivity to oxygen and water, a major challenge to scanning tunneling microscopy (STM) experiments. As a consequence, the large majority of these studies were performed by cleaving a bulk crys… ▽ More Black Phosphorus (bP) has emerged as an interesting addition to the category of two-dimensional materials. Surface-science studies on this material are of great interest, but they are hampered by bP's high reactivity to oxygen and water, a major challenge to scanning tunneling microscopy (STM) experiments. As a consequence, the large majority of these studies were performed by cleaving a bulk crystal in situ. Here we present a study of surface modifications on exfoliated bP flakes upon consecutive annealing steps, up to 550 C, well above the sublimation temperature of bP. In particular, our attention is focused on the temperature range 375 C - 400 C, when sublimation starts, and a controlled desorption from the surface occurs alongside with the formation of characteristic well-aligned craters. There is an open debate in the literature about the crystallographic orientation of these craters, whether they align along the zigzag or the armchair direction. Thanks to the atomic resolution provided by STM, we are able to identify the orientation of the craters with respect to the bP crystal: the long axis of the craters is aligned along the zigzag direction of bP. This allows us to solve the controversy, and, moreover, to provide insight in the underlying desorption mechanism leading to crater formation. △ Less

Submitted 28 August, 2018; originally announced August 2018.

Journal ref: 2D Mater. 6 (2019) 015005

Polymer-based black phosphorus (bP) hybrid materials by in situ radical polymerization: an effective tool to exfoliate bP and stabilize bP nanoflakes

Authors: Elisa Passaglia, Francesca Cicogna, Federica Costantino, Serena Coiai, Stefano Legnaioli, Giulia Lorenzetti, Silvia Borsacchi, Marco Geppi, Francesca Telesio, Stefan Heun, Andrea Ienco, Manuel Serrano-Ruiz, Maurizio Peruzzini

Abstract: Black phosphorus (bP) has been recently investigated for next generation nanoelectronic multifunctional devices. However, the intrinsic instability of exfoliated bP (the bP nanoflakes) towards both moisture and air has so far overshadowed its practical implementation. In order to contribute to fill this gap, we report here the preparation of new hybrid polymer-based materials where bP nanoflakes e… ▽ More Black phosphorus (bP) has been recently investigated for next generation nanoelectronic multifunctional devices. However, the intrinsic instability of exfoliated bP (the bP nanoflakes) towards both moisture and air has so far overshadowed its practical implementation. In order to contribute to fill this gap, we report here the preparation of new hybrid polymer-based materials where bP nanoflakes exhibit a significantly improved stability. The new materials have been prepared by different synthetic paths including: i) the mixing of conventionally liquid-phase exfoliated bP (in DMSO) with PMMA solution; ii) the direct exfoliation of bP in a polymeric solution; iii) the in situ radical polymerization after exfoliating bP in the liquid monomer (methyl methacrylate, MMA). This last methodology concerns the preparation of stable suspensions of bPn-MMA by sonication-assisted liquid phase exfoliation (LPE) of bP in the presence of MMA followed by radical polymerization. The hybrids characteristics have been compared in order to evaluate the bP dispersion and the effectiveness of the bPn interfacial interactions with polymer chains aimed at their long-term environmental stabilization. The passivation of bPn results particularly effective when the hybrid material is prepared by in situ polymerization. By using this synthetic methodology, the nanoflakes, even if with a gradient of dispersion (size of aggregates), preserve their chemical structure from oxidation (as proved by both Raman and 31P-Solid State NMR studies) and are particularly stable to air and UV light exposure. △ Less

Submitted 11 April, 2018; originally announced April 2018.

Journal ref: Chem. Mater. 2018, 30, 2036-2048

Phosphorus oxide gate dielectric for black phosphorus field effect transistors

Authors: W. Dickerson, V. Tayari, I. Fakih, A. Korinek, M. Caporali, M. Serrano-Ruiz, M. Peruzzini, S. Heun, G. A. Botton, T. Szkopek

Abstract: The environmental stability of the layered semiconductor black phosphorus (bP) remains a challenge. Passivation of the bP surface with phosphorus oxide, POx, grown by a reactive ion etch with oxygen plasma is known to improve photoluminescence efficiency of exfoliated bP flakes. We apply phosphorus oxide passivation in the fabrication of bP field effect transistors using a gate stack consisting of… ▽ More The environmental stability of the layered semiconductor black phosphorus (bP) remains a challenge. Passivation of the bP surface with phosphorus oxide, POx, grown by a reactive ion etch with oxygen plasma is known to improve photoluminescence efficiency of exfoliated bP flakes. We apply phosphorus oxide passivation in the fabrication of bP field effect transistors using a gate stack consisting of a POx layer grown by reactive ion etching followed by atomic layer deposition of Al2O3. We observe room temperature top-gate mobilities of 115 cm2/Vs in ambient conditions, which we attribute to the low defect density of the bP/POx interface. △ Less

Submitted 10 April, 2018; originally announced April 2018.

Journal ref: APPLIED PHYSICS LETTERS 112, 173101 (2018)

Hybrid 2D Black Phosphorus/Polymer Materials: New Platforms for Device Fabrication

Authors: Francesca Telesio, Elisa Passaglia, Francesca Cicogna, Federica Costantino, Manuel Serrano-Ruiz, Maurizio Peruzzini, Stefan Heun

Abstract: Hybrid materials, containing a 2D filler embedded in a polymeric matrix, are an interesting platform for several applications, because of the variety of properties that the filler can impart to the polymer matrix when dispersed at the nanoscale. Moreover, novel properties could arise from the interaction between the two. Mostly the bulk properties of these materials have been studied so far, espec… ▽ More Hybrid materials, containing a 2D filler embedded in a polymeric matrix, are an interesting platform for several applications, because of the variety of properties that the filler can impart to the polymer matrix when dispersed at the nanoscale. Moreover, novel properties could arise from the interaction between the two. Mostly the bulk properties of these materials have been studied so far, especially focusing on how the filler changes the polymeric matrix properties. Here we propose a complete change of perspective by using the hybrid nanocomposite material as a platform suitable to engineer the properties of the filler and to exploit its potential in the fabrication of devices. As a proof of concept of the versatility and potentiality of the new method, we applied this approach to prepare black phosphorus nanocomposites through its dispersion in poly (methyl methacrylate). Black phosphorus is a very interesting 2D material, whose application have so far been limited by its very high reactivity to oxygen and water. In this respect, we show that electronic-grade black phosphorus flakes, already embedded in a protecting matrix since their exfoliation from the bulk material, are endowed with significant increased stability, and can be further processed into devices without degrading their properties. △ Less

Submitted 4 February, 2018; originally announced February 2018.

Journal ref: Nanotechnology 29 (2018) 295601

Novel polystyrene-based nanocomposites by phosphorene dispersion

Authors: Elisa Passaglia, Francesca Cicogna, Giulia Lorenzetti, Stefano Legnaioli, Maria Caporali, Manuel Serrano-Ruiz, Andrea Ienco, Maurizio Peruzzini

Abstract: Polystyrene-based phosphorene nanocomposites were prepared by a solvent blending procedure allowing the embedding of black phosphorus (BP) nanoflakes in the polymer matrix. Raman spectroscopy, X Ray Diffraction and TEM microscopy were employed to characterize the structural and the morphological characteristics of the achieved hybrids, with the aim to evaluate the dispersion level of black phospho… ▽ More Polystyrene-based phosphorene nanocomposites were prepared by a solvent blending procedure allowing the embedding of black phosphorus (BP) nanoflakes in the polymer matrix. Raman spectroscopy, X Ray Diffraction and TEM microscopy were employed to characterize the structural and the morphological characteristics of the achieved hybrids, with the aim to evaluate the dispersion level of black phosphorus layers. TGA, DSC analysis as well as thermal oxidation and photo-degradation techniques were employed to investigate the thermal- and the photo-stability of the samples. The collected results evidenced better thermal and photostability of both polymer matrix and dispersed layered phosphorus, suggesting really interesting polymer-nanofiller synergic effects ascribable to the presence and the good dispersion of the 2D-nanomaterial. △ Less

Submitted 14 February, 2017; originally announced February 2017.

Comments: 14 pages, 6 figures

Journal ref: RSC Advances 6 (2016) 53777-53783

Decoration of exfoliated black phosphorus with nickel nanoparticles and application in catalysis

Authors: Maria Caporali, Manuel Serrano-Ruiz, Francesca Telesio, Stefan Heun, Giuseppe Nicotra, Corrado Spinella, Maurizio Peruzzini

Abstract: Nickel nanoparticles were dispersed on the surface of exfoliated black phosphorus and the resulting nanohybrid Ni/2DBP showed an improved stability respect to pristine 2D BP when kept in ambient conditions in the darkness. Ni/2DBP was applied as catalyst in the semihydrogenation of phenylacetylene and exhibited high conversion and selectivity towards styrene. These features were preserved after re… ▽ More Nickel nanoparticles were dispersed on the surface of exfoliated black phosphorus and the resulting nanohybrid Ni/2DBP showed an improved stability respect to pristine 2D BP when kept in ambient conditions in the darkness. Ni/2DBP was applied as catalyst in the semihydrogenation of phenylacetylene and exhibited high conversion and selectivity towards styrene. These features were preserved after recycling tests revealing the high stability of the nanohybrid. △ Less

Submitted 28 August, 2017; v1 submitted 16 September, 2016; originally announced September 2016.

Comments: Corrected misspelled author name

Journal ref: Chem. Commun. 53 (2017) 10946