-
The Muon Collider
Authors:
Carlotta Accettura,
Simon Adrian,
Rohit Agarwal,
Claudia Ahdida,
Chiara Aime',
Avni Aksoy,
Gian Luigi Alberghi,
Siobhan Alden,
Luca Alfonso,
Muhammad Ali,
Anna Rita Altamura,
Nicola Amapane,
Kathleen Amm,
David Amorim,
Paolo Andreetto,
Fabio Anulli,
Ludovica Aperio Bella,
Rob Appleby,
Artur Apresyan,
Pouya Asadi,
Mohammed Attia Mahmoud,
Bernhard Auchmann,
John Back,
Anthony Badea,
Kyu Jung Bae
, et al. (433 additional authors not shown)
Abstract:
Muons offer a unique opportunity to build a compact high-energy electroweak collider at the 10 TeV scale. A Muon Collider enables direct access to the underlying simplicity of the Standard Model and unparalleled reach beyond it. It will be a paradigm-shifting tool for particle physics representing the first collider to combine the high-energy reach of a proton collider and the high precision of an…
▽ More
Muons offer a unique opportunity to build a compact high-energy electroweak collider at the 10 TeV scale. A Muon Collider enables direct access to the underlying simplicity of the Standard Model and unparalleled reach beyond it. It will be a paradigm-shifting tool for particle physics representing the first collider to combine the high-energy reach of a proton collider and the high precision of an electron-positron collider, yielding a physics potential significantly greater than the sum of its individual parts. A high-energy muon collider is the natural next step in the exploration of fundamental physics after the HL-LHC and a natural complement to a future low-energy Higgs factory. Such a facility would significantly broaden the scope of particle colliders, engaging the many frontiers of the high energy community.
The last European Strategy for Particle Physics Update and later the Particle Physics Project Prioritisation Panel in the US requested a study of the muon collider, which is being carried on by the International Muon Collider Collaboration. In this comprehensive document we present the physics case, the state of the work on accelerator design and technology, and propose an R\&D project that can make the muon collider a reality.
△ Less
Submitted 30 April, 2025;
originally announced April 2025.
-
Theory of Beam Echoes
Authors:
Tanaji Sen
Abstract:
We develop the theory of beam echoes in circular accelerators under several different conditions. We derive detailed expressions for the echo amplitude and pulse width with nonlinear quadrupole and dipole kicks, first without and then with momentum spread. We use the theory with the linearized dipole and quadrupole kicks to solve the diffusion equation for different dependencies of the diffusion c…
▽ More
We develop the theory of beam echoes in circular accelerators under several different conditions. We derive detailed expressions for the echo amplitude and pulse width with nonlinear quadrupole and dipole kicks, first without and then with momentum spread. We use the theory with the linearized dipole and quadrupole kicks to solve the diffusion equation for different dependencies of the diffusion coefficient on the action. We then consider the use of multiple quadrupole kicks to increase the maximum echo amplitude. We have extended these calculations partially to the 2D case and we also have partial results for longitudinal echoes.
△ Less
Submitted 22 November, 2024;
originally announced November 2024.
-
MuCol Milestone Report No. 5: Preliminary Parameters
Authors:
Carlotta Accettura,
Simon Adrian,
Rohit Agarwal,
Claudia Ahdida,
Chiara Aimé,
Avni Aksoy,
Gian Luigi Alberghi,
Siobhan Alden,
Luca Alfonso,
Nicola Amapane,
David Amorim,
Paolo Andreetto,
Fabio Anulli,
Rob Appleby,
Artur Apresyan,
Pouya Asadi,
Mohammed Attia Mahmoud,
Bernhard Auchmann,
John Back,
Anthony Badea,
Kyu Jung Bae,
E. J. Bahng,
Lorenzo Balconi,
Fabrice Balli,
Laura Bandiera
, et al. (369 additional authors not shown)
Abstract:
This document is comprised of a collection of updated preliminary parameters for the key parts of the muon collider. The updated preliminary parameters follow on from the October 2023 Tentative Parameters Report. Particular attention has been given to regions of the facility that are believed to hold greater technical uncertainty in their design and that have a strong impact on the cost and power…
▽ More
This document is comprised of a collection of updated preliminary parameters for the key parts of the muon collider. The updated preliminary parameters follow on from the October 2023 Tentative Parameters Report. Particular attention has been given to regions of the facility that are believed to hold greater technical uncertainty in their design and that have a strong impact on the cost and power consumption of the facility. The data is collected from a collaborative spreadsheet and transferred to overleaf.
△ Less
Submitted 5 November, 2024;
originally announced November 2024.
-
Interim report for the International Muon Collider Collaboration (IMCC)
Authors:
C. Accettura,
S. Adrian,
R. Agarwal,
C. Ahdida,
C. Aimé,
A. Aksoy,
G. L. Alberghi,
S. Alden,
N. Amapane,
D. Amorim,
P. Andreetto,
F. Anulli,
R. Appleby,
A. Apresyan,
P. Asadi,
M. Attia Mahmoud,
B. Auchmann,
J. Back,
A. Badea,
K. J. Bae,
E. J. Bahng,
L. Balconi,
F. Balli,
L. Bandiera,
C. Barbagallo
, et al. (362 additional authors not shown)
Abstract:
The International Muon Collider Collaboration (IMCC) [1] was established in 2020 following the recommendations of the European Strategy for Particle Physics (ESPP) and the implementation of the European Strategy for Particle Physics-Accelerator R&D Roadmap by the Laboratory Directors Group [2], hereinafter referred to as the the European LDG roadmap. The Muon Collider Study (MuC) covers the accele…
▽ More
The International Muon Collider Collaboration (IMCC) [1] was established in 2020 following the recommendations of the European Strategy for Particle Physics (ESPP) and the implementation of the European Strategy for Particle Physics-Accelerator R&D Roadmap by the Laboratory Directors Group [2], hereinafter referred to as the the European LDG roadmap. The Muon Collider Study (MuC) covers the accelerator complex, detectors and physics for a future muon collider. In 2023, European Commission support was obtained for a design study of a muon collider (MuCol) [3]. This project started on 1st March 2023, with work-packages aligned with the overall muon collider studies. In preparation of and during the 2021-22 U.S. Snowmass process, the muon collider project parameters, technical studies and physics performance studies were performed and presented in great detail. Recently, the P5 panel [4] in the U.S. recommended a muon collider R&D, proposed to join the IMCC and envisages that the U.S. should prepare to host a muon collider, calling this their "muon shot". In the past, the U.S. Muon Accelerator Programme (MAP) [5] has been instrumental in studies of concepts and technologies for a muon collider.
△ Less
Submitted 28 January, 2025; v1 submitted 17 July, 2024;
originally announced July 2024.
-
Density distributions of tune shifts from space charge or beam-beam interactions in Gaussian bunches
Authors:
Tanaji Sen
Abstract:
The amplitude dependent tune shifts from either space charge or beam-beam interactions are calculated analytically with the inclusion of synchrotron oscillations and multiple interactions around the ring. Simpler formulae are derived under limits of bunches longer than the transverse sizes, equal and unequal transverse sizes etc. This is used to derive semi-analytical forms for the density distrib…
▽ More
The amplitude dependent tune shifts from either space charge or beam-beam interactions are calculated analytically with the inclusion of synchrotron oscillations and multiple interactions around the ring. Simpler formulae are derived under limits of bunches longer than the transverse sizes, equal and unequal transverse sizes etc. This is used to derive semi-analytical forms for the density distribution of the tune shifts. The tune spread and the density distribution are needed to understand beam decoherence or Landau damping with either interaction. The tune footprints due to space charge in IOTA are simulated using pyorbit and found to be in good agreement with the theoretical predictions.
△ Less
Submitted 27 June, 2023; v1 submitted 15 June, 2023;
originally announced June 2023.
-
Luminosity and beam-beam tune shifts with crossing angle and hourglass effects in e$^+$-e$^-$ colliders
Authors:
Tanaji Sen
Abstract:
We develop theoretical expressions for the luminosity and beam-beam tune shifts in the presence of both a crossing angle and hourglass effects for the present and next generation of symmetric e$^+$-e$^-$ colliders. The theory is applied to the design of the Fermilab site filler Higgs factory and to the FCC-ee collider.
We develop theoretical expressions for the luminosity and beam-beam tune shifts in the presence of both a crossing angle and hourglass effects for the present and next generation of symmetric e$^+$-e$^-$ colliders. The theory is applied to the design of the Fermilab site filler Higgs factory and to the FCC-ee collider.
△ Less
Submitted 17 August, 2022;
originally announced August 2022.
-
Future Collider Options for the US
Authors:
P. C. Bhat,
S. Jindariani,
G. Ambrosio,
G. Apollinari,
S. Belomestnykh,
A. Bross,
J. Butler,
A. Canepa,
D. Elvira,
P. Fox,
Z. Gecse,
E. Gianfelice-Wendt,
P. Merkel,
S. Nagaitsev,
D. Neuffer,
H. Piekarz,
S. Posen,
T. Sen,
V. Shiltsev,
N. Solyak,
D. Stratakis,
M. Syphers,
G. Velev,
V. Yakovlev,
K. Yonehara
, et al. (1 additional authors not shown)
Abstract:
The United States has a rich history in high energy particle accelerators and colliders -- both lepton and hadron machines, which have enabled several major discoveries in elementary particle physics. To ensure continued progress in the field, U.S. leadership as a key partner in building next generation collider facilities abroad is essential; also critically important is the exploring of options…
▽ More
The United States has a rich history in high energy particle accelerators and colliders -- both lepton and hadron machines, which have enabled several major discoveries in elementary particle physics. To ensure continued progress in the field, U.S. leadership as a key partner in building next generation collider facilities abroad is essential; also critically important is the exploring of options to host a future collider in the U.S. The "Snowmass" study and the subsequent Particle Physics Project Prioritization Panel (P5) process provide the timely opportunity to develop strategies for both. What we do now will shape the future of our field and whether the U.S. will remain a world leader in these areas. In this white paper, we briefly discuss the US engagement in proposed collider projects abroad and describe future collider options for the U.S. We also call for initiating an integrated R\&D program for future colliders.
△ Less
Submitted 15 March, 2022;
originally announced March 2022.
-
Space Charge Driven Emittance Growth and the Effect of Octupoles in IOTA
Authors:
David Feigelson,
Tanaji Sen,
Jean-Francois Ostiguy,
Runze Li
Abstract:
The Integrable Optics Test Accelerator (IOTA) at Fermilab is a small machine dedicated to a broad frontier accelerator physics program. An important aspect of this program is to investigate the potential benefits of the resonance free tune spread achievable with integrable optics to store and accelerate high intensity proton beams for which space charge is significant. In this context, a good unde…
▽ More
The Integrable Optics Test Accelerator (IOTA) at Fermilab is a small machine dedicated to a broad frontier accelerator physics program. An important aspect of this program is to investigate the potential benefits of the resonance free tune spread achievable with integrable optics to store and accelerate high intensity proton beams for which space charge is significant. In this context, a good understanding of proton beam emittance growth and particle loss mechanisms is essential.
Assuming nominal design parameters, simulations show that for a bunched beam, the bulk of emittance growth takes place immediately following injection, typically within tens of turns. We attempt to account for this growth using a simplified RMS mismatch theory; some of its limitations and possible improvements are briefly discussed. We then compare theoretical predictions to simulations performed using the PIC code pyORBIT. Further exploring ways to mitigate emittance growth and reduce particle loss, we compare two beam matching strategies: (1) matching at the injection point (2) matching at the center of the nonlinear (octupole) insertion region where $β_x = β_y$. To observe how nonlinearity affects emittance growth and whether it dominates growth due to mismatch, we track two different distributions. Finally, we explore the potential of using octupoles in a quasi-integrable configuration to mitigate growth using a variety of initial distributions both at reduced and full intensities.
△ Less
Submitted 31 December, 2021;
originally announced December 2021.
-
Modeling Transverse Space Charge effects in IOTA with pyORBIT
Authors:
Runze Li,
Tanaji Sen,
Jean-Francois Ostiguy
Abstract:
The role and mitigation of space charge effects are important aspects of the beam physics research to be performed at the Integrable Optics Test Accelerator (IOTA) at Fermilab. The impact of nonlinear integrability (partial and complete) on space charge driven incoherent and coherent resonances will be a new feature of this accelerator and has the potential to influence the design of future low en…
▽ More
The role and mitigation of space charge effects are important aspects of the beam physics research to be performed at the Integrable Optics Test Accelerator (IOTA) at Fermilab. The impact of nonlinear integrability (partial and complete) on space charge driven incoherent and coherent resonances will be a new feature of this accelerator and has the potential to influence the design of future low energy proton synchrotrons. In this report we model transverse space charge effects using the PIC code pyORBIT. First we benchmark the single particle tracking results against MADX with checks on symplecticity, tune footprints, and dynamic aperture in a partially integrable lattice realized with a special octupole string insert.
Our space charge calculations begin with an examination of the 4D symplecticity. Short term tracking is done first with the initial bare lattice and then with a matching of the rms values with space charge. Next, we explore slow initialization of charge as a technique to establish steady state and reduce emittance growth and beam loss following injection into a mismatched lattice. We establish values of space charge simulation parameters so as to ensure numerical convergence. Finally, we compare the simulated space charge induced tune shifts and footprints against theory.
△ Less
Submitted 20 July, 2021; v1 submitted 7 June, 2021;
originally announced June 2021.
-
Beam-beam effects in the Super Proton-Proton Collider
Authors:
Li-Jiao Wang,
Tanaji Sen,
Jing-Yu Tang
Abstract:
The Supper Proton-Proton Collider is a next-generation hadron collider that is now being designed. A baseline design aims for a peak luminosity of about 1*10^35 cm^-2 s^-1. The focus of this article is the effect of beam-beam interactions which are expected to strongly influence stability in the beams. We start with a discussion of a scheme to generate the crossing angles at the interaction points…
▽ More
The Supper Proton-Proton Collider is a next-generation hadron collider that is now being designed. A baseline design aims for a peak luminosity of about 1*10^35 cm^-2 s^-1. The focus of this article is the effect of beam-beam interactions which are expected to strongly influence stability in the beams. We start with a discussion of a scheme to generate the crossing angles at the interaction points while also correcting the dispersion thus created. The optics constraints on the achievable \b{eta}* were studied. Weak-strong simulations were performed to study single particle dynamics via tune footprints, frequency map analysis and dynamic aperture calculations. The long-range interactions with the smallest separations are shown to determine the dynamic aperture. Empirical scaling laws for the dependence of the dynamic aperture on the transverse separations and on the number of long-range interactions are found. A tune scan shows several alternative working points with slightly better dynamic aperture than the baseline choice. Finally an option to significantly increase the dynamic aperture by increasing the crossing angle for different choices of \b{eta}* was studied.
△ Less
Submitted 2 June, 2020;
originally announced June 2020.
-
Weak-Strong Simulation of Beam-Beam Effects in Super Proton-Proton Collider
Authors:
Lijiao Wang,
Jingyu Tang,
Tanaji Sen
Abstract:
A Super Proton-Proton Collider (SPPC) that aims to explore new physics beyond the standard model will be built in China. Here we focus on the impact of beam-beam interactions in the SPPC. Simulations show that with the current optics and nominal tunes, the dynamic aperture (DA) with all the beam-beam interactions is less than 6σ, the dominant cause being the long-range interactions. First, we show…
▽ More
A Super Proton-Proton Collider (SPPC) that aims to explore new physics beyond the standard model will be built in China. Here we focus on the impact of beam-beam interactions in the SPPC. Simulations show that with the current optics and nominal tunes, the dynamic aperture (DA) with all the beam-beam interactions is less than 6σ, the dominant cause being the long-range interactions. First, we show the results of a tune scan done to maximize the DA. Next, we discuss the compensation of the long-range interactions by increasing the crossing angle and also by using current carrying wires.
△ Less
Submitted 5 December, 2019;
originally announced December 2019.
-
Fields and Characteristic Impedances of Dipole and Quadrupole Cylindrical Stripline Kickers
Authors:
Tanaji Sen,
Yisheng Tu,
Jean-Francois Ostiguy
Abstract:
We present semi-analytical methods for calculating the electromagnetic field in dipole and quadrupole stripline kickers with curved plates of infinitesimal thickness. Two different methods are used to solve Laplace's equation by reducing it either to a single or to two coupled matrix equations; they are shown to yield equivalent results. Approximate analytic solutions for the lowest order fields (…
▽ More
We present semi-analytical methods for calculating the electromagnetic field in dipole and quadrupole stripline kickers with curved plates of infinitesimal thickness. Two different methods are used to solve Laplace's equation by reducing it either to a single or to two coupled matrix equations; they are shown to yield equivalent results. Approximate analytic solutions for the lowest order fields (dipole or quadrupole) are presented and their useful range of validity are shown. The kickers plates define a set of coupled transmission lines and the characteristic impedances of modes relevant to each configuration are calculated. The solutions are compared with those obtained from a finite element solver and found to be in good agreement. Mode matching to an external impedance determines the kicker geometry and this is discussed for both kicker types. We show that a heuristic scaling law can be used to determine the dependence of the characteristic impedance on plate thickness. The solutions found by semi-analytical methods can be used as a starting point for a more detailed kicker design.
△ Less
Submitted 8 January, 2020; v1 submitted 15 October, 2019;
originally announced October 2019.
-
Micro-bunching for generating tunable narrow-band THz radiation at the FAST photoinjector
Authors:
J. Hyun,
P. Piot,
T. Sen,
J. C. Thangaraj
Abstract:
This paper presents expected THz radiation spectra emitted by micro-bunched electron beams produced using a slit-mask placed within a magnetic chicane in the FAST (Fermilab Accelerator Science and Technology) electron injector at Fermilab. Our purpose is to generate tunable narrow-band THz radiation with a simple scheme in a conventional photo-injector. Using the slit-mask in the chicane, we creat…
▽ More
This paper presents expected THz radiation spectra emitted by micro-bunched electron beams produced using a slit-mask placed within a magnetic chicane in the FAST (Fermilab Accelerator Science and Technology) electron injector at Fermilab. Our purpose is to generate tunable narrow-band THz radiation with a simple scheme in a conventional photo-injector. Using the slit-mask in the chicane, we create a longitudinally micro-bunched beam after the chicane by transversely slicing an energy chirped electron bunch at a location with horizontal dispersion. In this paper, we discuss the theory related to the micro-bunched beam structure, the beam optics, the simulation results of the micro-bunched beam and the bunching factors. Energy radiated at THz frequencies from two sources: coherent transition radiation and from a wiggler is calculated and compared. We also discuss the results of a simple method to observe the micro-bunching on a transverse screen monitor using a skew quadrupole placed in the chicane.
△ Less
Submitted 12 November, 2018; v1 submitted 23 August, 2018;
originally announced August 2018.
-
Micro-Bunched Beam Production at FAST for Narrow Band THz Generation Using a Slit-Mask
Authors:
J. Hyun,
D. Crawford,
D. Edstrom Jr.,
J. Ruan,
J. Santucci,
R. Thurman-Keup,
T. Sen,
J. C. Thangaraj
Abstract:
We discuss simulations and experiments on creating micro-bunch beams for generating narrow band THz radiation at the Fermilab Accelerator Science and Technology (FAST) facility. The low-energy electron beamline at FAST consists of a photoinjector-based RF gun, two L-band superconducting accelerating cavities, a chicane, and a beam dump. The electron bunches are lengthened with cavity phases set of…
▽ More
We discuss simulations and experiments on creating micro-bunch beams for generating narrow band THz radiation at the Fermilab Accelerator Science and Technology (FAST) facility. The low-energy electron beamline at FAST consists of a photoinjector-based RF gun, two L-band superconducting accelerating cavities, a chicane, and a beam dump. The electron bunches are lengthened with cavity phases set off-crest for better longitudinal separation and then micro-bunched with a slit-mask installed in the chicane. We carried out the experiments with 30 MeV electron beams and detected signals of the micro-bunching using a skew quadrupole magnet in the chicane. In this paper, the details of micro-bunch beam production, the detection of micro-bunching and comparison with simulations are described.
△ Less
Submitted 11 July, 2018;
originally announced July 2018.
-
Optics and bremsstrahlung estimates for channeling radiation experiments at FAST
Authors:
J. Hyun,
P. Piot,
T. Sen
Abstract:
This paper presents X-ray spectra of channeling radiation (CR) expected at the FAST (Fermi Accelerator Science and Technology) facility in Fermilab. Our purpose is to produce high brightness quasi-monochromatic X-rays in an energy range from 40 keV to 110 keV. We will use a diamond crystal and low emittance electrons with an energy of around 43 MeV. The quality of emitted X-rays strongly depends o…
▽ More
This paper presents X-ray spectra of channeling radiation (CR) expected at the FAST (Fermi Accelerator Science and Technology) facility in Fermilab. Our purpose is to produce high brightness quasi-monochromatic X-rays in an energy range from 40 keV to 110 keV. We will use a diamond crystal and low emittance electrons with an energy of around 43 MeV. The quality of emitted X-rays strongly depends on parameters of the electron beam at the crystal. We present simulations of the beam optics for high brightness and high yield operations with bunch charges of 1 pC, 20 pC, and 200 pC. We estimate the X-ray spectra including bremsstrahlung background for a charge of 20 pC. The electron beam distributions with and without channeling in the diamond crystal are calculated. We discuss an X-ray detector system to avoid pile-up effect during high charge operations.
△ Less
Submitted 16 February, 2018;
originally announced February 2018.
-
Nonlinear theory of transverse beam echoes
Authors:
Tanaji Sen,
Yuan Shen Li
Abstract:
Transverse beam echoes can be excited with a single dipole kick followed by a single quadrupole kick. They have been used to measure diffusion in hadron beams and have other diagnostic capabilities. Here we develop theories of the transverse echo nonlinear in both the dipole and quadrupole kick strengths. The theories predict the maximum echo amplitudes and the optimum strength parameters. We find…
▽ More
Transverse beam echoes can be excited with a single dipole kick followed by a single quadrupole kick. They have been used to measure diffusion in hadron beams and have other diagnostic capabilities. Here we develop theories of the transverse echo nonlinear in both the dipole and quadrupole kick strengths. The theories predict the maximum echo amplitudes and the optimum strength parameters. We find that the echo amplitude increases with smaller beam emittance and the asymptotic echo amplitude can exceed half the initial dipole kick amplitude. We show that multiple echoes can be observed provided the dipole kick is large enough. The spectrum of the echo pulse can be used to determine the nonlinear detuning parameter with small amplitude dipole kicks. Simulations are performed to check the theoretical predictions. In the useful ranges of dipole and quadrupole strengths, they are shown to be in reasonable agreement.
△ Less
Submitted 13 July, 2018; v1 submitted 4 October, 2017;
originally announced October 2017.
-
Commissioning and First Results From Channeling Radiation At FAST
Authors:
A. Halavanau,
D. Mihalcea,
D. Broemmelsiek,
D. Edstrom Jr.,
T. Sen,
A. Romanov,
J. Ruan,
V. Shiltsev,
P. Kobak,
W. Rush,
J. Hyun
Abstract:
X-rays have widespread applications in science and industry, but developing a simple, compact, and high-quality X-ray source remains a challenge. Our collaboration has explored the possible use of channeling radiation driven by a 50 MeV low-emittance electron beam to produce narrowband hard X-rays with photon energy of 40 to 140 keV. Here we present the simulated X-ray spectra including the backgr…
▽ More
X-rays have widespread applications in science and industry, but developing a simple, compact, and high-quality X-ray source remains a challenge. Our collaboration has explored the possible use of channeling radiation driven by a 50 MeV low-emittance electron beam to produce narrowband hard X-rays with photon energy of 40 to 140 keV. Here we present the simulated X-ray spectra including the background bremsstrahlung contribution, and a description of the required optimization of the relevant electron-beam parameters necessary to maximize brilliance of the resulting X-ray beam. Results are presented from our test of this, carried out at the Fermilab Accelerator Science & Technology (FAST) facility's 50-MeV low-energy electron injector. As a result of the beam parameters, made possible by the photo-injector based SRF linac, the average brilliance at FAST was expected to be about one order of magnitude higher than that in previous experiments.
△ Less
Submitted 21 December, 2016;
originally announced December 2016.
-
IOTA (Integrable Optics Test Accelerator): Facility and Experimental Beam Physics Program
Authors:
Sergei Antipov,
Daniel Broemmelsiek,
David Bruhwiler,
Dean Edstrom,
Elvin Harms,
Valery Lebedev,
Jerry Leibfritz,
Sergei Nagaitsev,
Chong-Shik Park,
Henryk Piekarz,
Philippe Piot,
Eric Prebys,
Alexander Romanov,
Jinhao Ruan,
Tanaji Sen,
Giulio Stancari,
Charles Thangaraj,
Randy Thurman-Keup,
Alexander Valishev,
Vladimir Shiltsev
Abstract:
The Integrable Optics Test Accelerator (IOTA) is a storage ring for advanced beam physics research currently being built and commissioned at Fermilab. It will operate with protons and electrons using injectors with momenta of 70 and 150 MeV/c, respectively. The research program includes the study of nonlinear focusing integrable optical beam lattices based on special magnets and electron lenses, b…
▽ More
The Integrable Optics Test Accelerator (IOTA) is a storage ring for advanced beam physics research currently being built and commissioned at Fermilab. It will operate with protons and electrons using injectors with momenta of 70 and 150 MeV/c, respectively. The research program includes the study of nonlinear focusing integrable optical beam lattices based on special magnets and electron lenses, beam dynamics of space-charge effects and their compensation, optical stochastic cooling, and several other experiments. In this article, we present the design and main parameters of the facility, outline progress to date and provide the timeline of the construction, commissioning and research. The physical principles, design, and hardware implementation plans for the major IOTA experiments are also discussed.
△ Less
Submitted 19 December, 2016;
originally announced December 2016.
-
Diffusion measurement from observed transverse beam echoes
Authors:
Tanaji Sen,
Wolfram Fischer
Abstract:
We study the measurement of transverse diffusion through beam echoes. We revisit earlier observations of echoes in RHIC and apply an updated theoretical model to these measurements. We consider three possible models for the diffusion coefficient and show that only one is consistent with measured echo amplitudes and pulse widths. This model allows us to parameterize the diffusion coefficients as fu…
▽ More
We study the measurement of transverse diffusion through beam echoes. We revisit earlier observations of echoes in RHIC and apply an updated theoretical model to these measurements. We consider three possible models for the diffusion coefficient and show that only one is consistent with measured echo amplitudes and pulse widths. This model allows us to parameterize the diffusion coefficients as functions of bunch charge. We demonstrate that echoes can be used to measure diffusion much quicker than present methods and could be useful to a variety of hadron synchrotrons.
△ Less
Submitted 4 January, 2017; v1 submitted 6 October, 2016;
originally announced October 2016.
-
Spectral Brilliance of Parametric X-rays at the FAST facility
Authors:
Tanaji Sen,
Todd Seiss
Abstract:
We discuss the generation of parametric X-rays in the new photoinjector at the FAST (Fermilab Accelerator Science and Technology) facility in Fermilab. These experiments will be conducted in addition to channeling X-ray radiation experiments. The low emittance electron beam makes this facility a promising source for creating brilliant X-rays. We discuss the theoretical model and present detailed c…
▽ More
We discuss the generation of parametric X-rays in the new photoinjector at the FAST (Fermilab Accelerator Science and Technology) facility in Fermilab. These experiments will be conducted in addition to channeling X-ray radiation experiments. The low emittance electron beam makes this facility a promising source for creating brilliant X-rays. We discuss the theoretical model and present detailed calculations of the intensity spectrum, energy and angular widths and spectral brilliance under different conditions. We also report on expected results with parametric X-rays generated while under channeling conditions.
△ Less
Submitted 22 June, 2015;
originally announced June 2015.
-
Spectral Brilliance of Channeling Radiation at the ASTA Photoinjector
Authors:
Tanaji Sen,
Christopher Lynn
Abstract:
We study channeling radiation from electron beams with energies under 100 MeV. We introduce a phenomenological model of dechanneling, correct non-radiative transition rates from thermal scattering, and discuss in detail the population dynamics in low order bound states. These are used to revisit the X-ray properties measured at the ELBE facility in Forschungszentrum Dresden-Rosenstock (FZDR), extr…
▽ More
We study channeling radiation from electron beams with energies under 100 MeV. We introduce a phenomenological model of dechanneling, correct non-radiative transition rates from thermal scattering, and discuss in detail the population dynamics in low order bound states. These are used to revisit the X-ray properties measured at the ELBE facility in Forschungszentrum Dresden-Rosenstock (FZDR), extract parameters for dechanneling states, and obtain satisfactory agreement with measured photon yields. The importance of rechanneling phenomena in thick crystals is emphasized. The model is then used to calculate the expected X-ray energies, linewidths and brilliance for forthcoming channeling radiation experiments at Fermilab's ASTA photoinjector.
△ Less
Submitted 19 November, 2014; v1 submitted 22 July, 2014;
originally announced July 2014.
-
A two-step method for retrieving the longitudinal profile of an electron bunch from its coherent radiation
Authors:
Daniele Pelliccia,
Tanaji Sen
Abstract:
The coherent radiation emitted by an electron bunch provides a diagnostic signal that can be used to estimate its longitudinal distribution. Commonly only the amplitude of the intensity spectrum can be measured and the associated phase must be calculated to obtain the bunch profile. Very recently an iterative method was proposed to retrieve this phase. However ambiguities associated with non-uniqu…
▽ More
The coherent radiation emitted by an electron bunch provides a diagnostic signal that can be used to estimate its longitudinal distribution. Commonly only the amplitude of the intensity spectrum can be measured and the associated phase must be calculated to obtain the bunch profile. Very recently an iterative method was proposed to retrieve this phase. However ambiguities associated with non-uniqueness of the solution are always present in the phase retrieval procedure. Here we present a method to overcome the ambiguity problem by first performing multiple independent runs of the phase retrieval procedure and then second, sorting the good solutions by mean of cross-correlation analysis. Results obtained with simulated bunches of various shapes and experimental measured spectra are presented, discussed and compared with the established Kramers-Kronig method. It is shown that even when the effect of the ambiguities is strong, as is the case for a double peak in the profile, the cross-correlation post-processing is able to filter out unwanted solutions. We show that, unlike the Kramers-Kronig method, the combined approach presented is able to faithfully reconstruct complicated bunch profiles.
△ Less
Submitted 3 July, 2014; v1 submitted 5 March, 2014;
originally announced March 2014.
-
nuSTORM - Neutrinos from STORed Muons: Proposal to the Fermilab PAC
Authors:
D. Adey,
S. K. Agarwalla,
C. M. Ankenbrandt,
R. Asfandiyarov,
J. J. Back,
G. Barker,
E. Baussan,
R. Bayes,
S. Bhadra,
V. Blackmore,
A. Blondel,
S. A. Bogacz,
C. Booth,
S. B. Boyd,
A. Bravar,
S. J. Brice,
A. D. Bross,
F. Cadoux,
H. Cease,
A. Cervera,
J. Cobb,
D. Colling,
P. Coloma,
L. Coney,
A. Dobbs
, et al. (88 additional authors not shown)
Abstract:
The nuSTORM facility has been designed to deliver beams of electron neutrinos and muon neutrinos (and their anti-particles) from the decay of a stored muon beam with a central momentum of 3.8 GeV/c and a momentum acceptance of 10%. The facility is unique in that it will: 1. Allow searches for sterile neutrinos of exquisite sensitivity to be carried out; 2. Serve future long- and short-baseline neu…
▽ More
The nuSTORM facility has been designed to deliver beams of electron neutrinos and muon neutrinos (and their anti-particles) from the decay of a stored muon beam with a central momentum of 3.8 GeV/c and a momentum acceptance of 10%. The facility is unique in that it will: 1. Allow searches for sterile neutrinos of exquisite sensitivity to be carried out; 2. Serve future long- and short-baseline neutrino-oscillation programs by providing definitive measurements of electron neutrino and muon neutrino scattering cross sections off nuclei with percent-level precision; and 3. Constitutes the crucial first step in the development of muon accelerators as a powerful new technique for particle physics. The document describes the facility in detail and demonstrates its physics capabilities. This document was submitted to the Fermilab Physics Advisory Committee in consideration for Stage I approval.
△ Less
Submitted 31 July, 2013;
originally announced August 2013.
-
Proton-proton and electron-positron collider in a 100 km ring at Fermilab
Authors:
C. M. Bhat,
P. C. Bhat,
W. Chou,
E. Gianfelice-Wendt,
J. Lykken,
G. L. Sabbi,
T. Sen,
R. Talman
Abstract:
The discovery of a Higgs-like boson with mass near 126 GeV, at the LHC, has reignited interest in future energy frontier colliders. We propose here a proton-proton (pp) collider in a 100 km ring, with center of mass (CM) energy of ~100 TeV which would have substantial discovery potential for new heavy particles and new physics beyond the Standard Model. In the case that LHC experiments have alread…
▽ More
The discovery of a Higgs-like boson with mass near 126 GeV, at the LHC, has reignited interest in future energy frontier colliders. We propose here a proton-proton (pp) collider in a 100 km ring, with center of mass (CM) energy of ~100 TeV which would have substantial discovery potential for new heavy particles and new physics beyond the Standard Model. In the case that LHC experiments have already found exotic resonances or heavy "partner" particles, this collider could fill out the "tower" of resonances (thus e.g. confirming an extra dimension) or the full suite of partner particles (e.g. for supersymmetry). The high luminosity of the new collider would enable unique precision studies of the Higgs boson (including Higgs self coupling and rare Higgs decays), and its higher energy would allow more complete measurements of vector boson scattering to help elucidate electroweak symmetry breaking. We also discuss an e+e- collider in the same 100 km ring with CM energies from 90 to 350 GeV. This collider would enable precision electroweak measurements up to the ttbar threshold, and serve as a Higgs factory.
△ Less
Submitted 10 June, 2013;
originally announced June 2013.
-
Anomalous beam diffusion near beam-beam synchro-betatron resonances
Authors:
Tanaji Sen
Abstract:
The diffusion process near low order synchro-betatron resonances driven by beam-beam interactions at a crossing angle is investigated. Macroscopic observables such as beam emittance, lifetime and beam profiles are calculated. These are followed with detailed studies of microscopic quantities such as the evolution of the variance at several initial transverse amplitudes and single particle probabil…
▽ More
The diffusion process near low order synchro-betatron resonances driven by beam-beam interactions at a crossing angle is investigated. Macroscopic observables such as beam emittance, lifetime and beam profiles are calculated. These are followed with detailed studies of microscopic quantities such as the evolution of the variance at several initial transverse amplitudes and single particle probability distribution functions. We present evidence to show that the observed diffusion is anomalous and the dynamics follows a non-Markovian continuous time random walk process. We derive a modified master equation to replace the Chapman-Kolmogorov equation in action-angle space and a fractional diffusion equation to describe the density evolution for this class of processes.
△ Less
Submitted 16 May, 2012;
originally announced May 2012.
-
CRAB Cavity in CERN SPS
Authors:
H. J. Kim,
T. Sen
Abstract:
Beam collisions with a crossing angle at the interaction point have been applied in high intensity colliders to reduce the effects of parasitic collisions which induce emittance growth and beam lifetime deterioration. The crossing angle causes the geometrical reduction of the luminosity. Crab cavity can be one of the most promising ways to compensate the crossing angle and to realize effective hea…
▽ More
Beam collisions with a crossing angle at the interaction point have been applied in high intensity colliders to reduce the effects of parasitic collisions which induce emittance growth and beam lifetime deterioration. The crossing angle causes the geometrical reduction of the luminosity. Crab cavity can be one of the most promising ways to compensate the crossing angle and to realize effective head-on collisions. Moreover, the crab crossing mitigates the synchro-betatron resonances due to the crossing angle. Crab cavity experiment in SPS is proposed for deciding on a full crab-cavity implementation in LHC. In this paper, we investigate the effects of crab crossing on beam dynamics and its life time with the global scheme.
△ Less
Submitted 3 February, 2012;
originally announced February 2012.
-
Diffusion dynamics in a Tevatron store
Authors:
Tanaji Sen
Abstract:
A separator failure during a store in 2002 led to a drop in luminosity, to increased emittance growth and to a drop in beam lifetimes. We show that a simple diffusion model can be used to explain the changes in emittance growth and beam lifetimes.
A separator failure during a store in 2002 led to a drop in luminosity, to increased emittance growth and to a drop in beam lifetimes. We show that a simple diffusion model can be used to explain the changes in emittance growth and beam lifetimes.
△ Less
Submitted 13 September, 2011;
originally announced September 2011.
-
Longitudinal dynamics and tomography in the Tevatron
Authors:
J. Stogin,
T. Sen,
R. S. Moore
Abstract:
Motivated by the desire to understand the longitudinal effects of beam-beam forces, we study the longitudinal dynamics of protons and anti-protons at injection and top energy in the Tevatron. Multi-turn data of the longitudinal profiles are captured to reveal information about frequencies of oscillation, and changes in the bunch distributions. Tomographic reconstruction is used to create phase spa…
▽ More
Motivated by the desire to understand the longitudinal effects of beam-beam forces, we study the longitudinal dynamics of protons and anti-protons at injection and top energy in the Tevatron. Multi-turn data of the longitudinal profiles are captured to reveal information about frequencies of oscillation, and changes in the bunch distributions. Tomographic reconstruction is used to create phase space maps which are subsequently used to find the momentum distributions. Changes in these distributions for both proton and anti-proton beams are also followed through the operational cycle. We report on the details of interesting dynamics and some unexpected findings.
△ Less
Submitted 10 August, 2011;
originally announced August 2011.
-
Observations and Open Questions in Beam-Beam Interaction
Authors:
Tanaji Sen
Abstract:
A review article on the physics of beam-beam interactions in circular colliders.
A review article on the physics of beam-beam interactions in circular colliders.
△ Less
Submitted 11 February, 2011;
originally announced February 2011.
-
Beam-beam simulation code BBSIM for particle accelerators
Authors:
Hyung J. Kim,
Tanaji Sen
Abstract:
A highly efficient, fully parallelized, six-dimensional tracking model for simulating interactions of colliding hadron beams in high energy ring colliders and simulating schemes for mitigating their effects is described. The model uses the weak-strong approximation for calculating the head-on interactions when the test beam has lower intensity than the other beam, a look-up table for the efficient…
▽ More
A highly efficient, fully parallelized, six-dimensional tracking model for simulating interactions of colliding hadron beams in high energy ring colliders and simulating schemes for mitigating their effects is described. The model uses the weak-strong approximation for calculating the head-on interactions when the test beam has lower intensity than the other beam, a look-up table for the efficient calculation of long-range beam-beam forces, and a self-consistent Poisson solver when both beams have comparable intensities. A performance test of the model in a parallel environment is presented. The code is used to calculate beam emittance and beam loss in the Tevatron at Fermilab and compared with measurements. We also present results from the studies of two schemes proposed to compensate the beam-beam interactions: a) the compensation of long-range interactions in the Relativistic Heavy Ion Collider (RHIC) at Brookhaven and the Large Hadron Collider (LHC) at CERN with a current-carrying wire, b) the use of a low energy electron beam to compensate the head-on interactions in RHIC.
△ Less
Submitted 11 April, 2011; v1 submitted 27 January, 2011;
originally announced January 2011.
-
Longitudinal Stability of Recycler Bunches; Part I: Thresholds for Loss of Landau Damping
Authors:
T. Sen,
C. M. Bhat,
J. -F. Ostiguy
Abstract:
We examine the stability of intense flat bunches in barrier buckets used in the Recycler. We consider some common stationary distributions and show that they would be unstable against rigid dipole oscillations. We then discuss an analytical model for the line density that best describes measured bunch profiles. We include space charge in this model to predict the bunch intensity at which Landau…
▽ More
We examine the stability of intense flat bunches in barrier buckets used in the Recycler. We consider some common stationary distributions and show that they would be unstable against rigid dipole oscillations. We then discuss an analytical model for the line density that best describes measured bunch profiles. We include space charge in this model to predict the bunch intensity at which Landau damping would be lost. The dependence of this threshold on the bunch length is studied and related to the results of an experimental study with shorter bunch lengths. The threshold for the microwave instability is estimated. These studies will be followed by more detailed numerical studies.
△ Less
Submitted 11 June, 2009;
originally announced June 2009.
-
Simulations of beam-beam and beam-wire interactions in RHIC
Authors:
Hyung J. Kim,
Tanaji Sen,
Natalia P. Abreu,
Wolfram Fischer
Abstract:
The beam-beam interaction is one of the dominant sources of emittance growth and luminosity lifetime deterioration. A current carrying wire has been proposed to compensate long-range beam-beam effects in the LHC and strong localized long-range beam-beam effects are experimentally investigated in the RHIC collider. Tune shift, beam transfer function, and beam loss rate are measured in dedicated exp…
▽ More
The beam-beam interaction is one of the dominant sources of emittance growth and luminosity lifetime deterioration. A current carrying wire has been proposed to compensate long-range beam-beam effects in the LHC and strong localized long-range beam-beam effects are experimentally investigated in the RHIC collider. Tune shift, beam transfer function, and beam loss rate are measured in dedicated experiments. In this paper, we report on simulations to study the effect of beam-wire interactions based on diffusive apertures, beam loss rates, and beam transfer function using a parallelized weak-strong beam simulation code (bbsimc). The simulation results are compared with measurements performed in RHIC during 2007 and 2008.
△ Less
Submitted 11 April, 2011; v1 submitted 9 February, 2009;
originally announced February 2009.
-
Optical Diffraction Radiation from a beam off a circular target
Authors:
Tanaji Sen
Abstract:
We calculate the optical diffraction radiation generated by a bunch of high energy particles as they pass through a round hole within an annular metallic ring. We derive expressions for the differential angular spectrum in the far-field and the intensities of the horizontal and vertical polarizations. The sensitivity of the spectrum to changes in beam size and position is shown. The total photon…
▽ More
We calculate the optical diffraction radiation generated by a bunch of high energy particles as they pass through a round hole within an annular metallic ring. We derive expressions for the differential angular spectrum in the far-field and the intensities of the horizontal and vertical polarizations. The sensitivity of the spectrum to changes in beam size and position is shown. The total photon yield from the bunch is calculated and used to set limits on the detectable wavelengths.
△ Less
Submitted 28 August, 2008;
originally announced August 2008.
-
Diffusion due to the Beam-Beam Interaction and Fluctuating Fields in Hadron Colliders
Authors:
Tanaji Sen,
James A. Ellison
Abstract:
Random fluctuations in the tune, beam offsets and beam size in the presence of the beam-beam interaction are shown to lead to significant particle diffusion and emittance growth in hadron colliders. We find that far from resonances high frequency noise causes the most diffusion while near resonances low frequency noise is responsible for the large emittance growth observed. Comparison of differe…
▽ More
Random fluctuations in the tune, beam offsets and beam size in the presence of the beam-beam interaction are shown to lead to significant particle diffusion and emittance growth in hadron colliders. We find that far from resonances high frequency noise causes the most diffusion while near resonances low frequency noise is responsible for the large emittance growth observed. Comparison of different fluctuations shows that offset fluctuations between the beams causes the largest diffusion for particles in the beam core.
△ Less
Submitted 15 February, 1996;
originally announced February 1996.
