Showing 1–26 of 26 results for author: Scott, A

Impact of super-Gaussian electron distributions on plasma K-shell emission

Authors: H. P. Le, E. V. Marley, H. A. Scott

Abstract: Electron distributions in laser-produced plasmas will be driven toward a super-Gaussian distribution due to inverse bremsstrahlung absorption [Langdon, Phys. Rev. Lett. 44, 575 (1980)]. Both theoretical and experimental evidence suggest that fundamental plasma properties are altered by the super-Gaussian distribution. This paper examines how the super-Gaussian distribution affects the ionization b… ▽ More Electron distributions in laser-produced plasmas will be driven toward a super-Gaussian distribution due to inverse bremsstrahlung absorption [Langdon, Phys. Rev. Lett. 44, 575 (1980)]. Both theoretical and experimental evidence suggest that fundamental plasma properties are altered by the super-Gaussian distribution. This paper examines how the super-Gaussian distribution affects the ionization balance and K-shell emission of atomic plasmas, utilizing approximate formulas and detailed collisional-radiative simulations. While the impact on plasma ionization is small, K-shell spectra can be significantly modified. Based on these findings, we demonstrate that K-shell spectroscopy can be used to infer super-Gaussian or other similar non-equilibrium electron distributions. △ Less

Submitted 3 July, 2025; originally announced July 2025.

Is fitting error a reliable metric for assessing deformable motion correction in quantitative MRI?

Authors: Fanwen Wang, Ke Wen, Yaqing Luo, Yinzhe Wu, Jiahao Huang, Dudley J. Pennell, Pedro F. Ferreira, Andrew D. Scott, Sonia Nielles-Vallespin, Guang Yang

Abstract: Quantitative MR (qMR) can provide numerical values representing the physical and chemical properties of the tissues. To collect a series of frames under varying settings, retrospective motion correction is essential to align the corresponding anatomical points or features. Under the assumption that the misalignment makes the discrepancy between the corresponding features larger, fitting error is a… ▽ More Quantitative MR (qMR) can provide numerical values representing the physical and chemical properties of the tissues. To collect a series of frames under varying settings, retrospective motion correction is essential to align the corresponding anatomical points or features. Under the assumption that the misalignment makes the discrepancy between the corresponding features larger, fitting error is a commonly used evaluation metric for motion correction in qMR. This study evaluates the reliability of the fitting error metric in cardiac diffusion tensor imaging (cDTI) after deformable registration. We found that while fitting error correlates with the negative eigenvalues, the negative Jacobian Determinant increases with broken cardiomyocytes, indicated by helix angle gradient line profiles. Since fitting error measures the distance between moved points and their re-rendered counterparts, the fitting parameter itself may be adjusted due to poor registration. Therefore, fitting error in deformable registration itself is a necessary but not sufficient metric and should be combined with other metrics. △ Less

Submitted 10 March, 2025; originally announced March 2025.

Comments: 5 pages, 5 figures. Accepted by ISBI 2025

Fabrication of ultra-smooth, high-aspect ratio, sub-10 nanometer nanostructures

Authors: John A. Scott, Panaiot G. Zotev, Luca Sortino, Yadong Wang, Amos Akande, Michelle L. Wood, Alexander I. Tartakovskii, Milos Toth, Stefano Palomba

Abstract: Deterministic and versatile approaches to sample preparation on nanoscopic scales are important in many fields including photonics, electronics, biology and material science. However, challenges exist in meeting many nanostructuring demands--particularly in emerging optical materials and component architectures. Here, we report a nanofabrication workflow that overcomes long-standing challenges in… ▽ More Deterministic and versatile approaches to sample preparation on nanoscopic scales are important in many fields including photonics, electronics, biology and material science. However, challenges exist in meeting many nanostructuring demands--particularly in emerging optical materials and component architectures. Here, we report a nanofabrication workflow that overcomes long-standing challenges in deterministic and top-down sample preparation procedures. The salient feature is a carbon mask with a low sputter yield that can be readily shaped using high resolution electron beam processing techniques. When combined with focused ion beam processing, the masking technique yields structures with ultra-smooth, near-vertical side walls. We target different material platforms to showcase the broad utility of the technique. As a first test case, we prepared nanometric gaps in evaporated Au. Gap widths of 7 plus/minus 2 nm, aspect ratios of 17, and line edge roughness values of 3sigma = 2.04 nm are achieved. Furthermore, the gap widths represent an order of magnitude improvement on system resolution limits. As a second test case, we designed and fabricated dielectric resonators in the ternary compounds MnPSe3 and NiPS3; a class of van der Waals material resistant to chemical etch approaches. Nanoantenna arrays with incrementally increasing diameter were fabricated in crystalline, exfoliated flakes. The optical response was measured by dark field spectroscopy and is in agreement with simulations. The workflow reported here leverages established techniques in material processing without the need for custom or specialized hardware. It is broadly applicable to functional materials and devices, and extends high speed focused ion beam milling to true sub-10 nm length scales. △ Less

Submitted 5 February, 2025; v1 submitted 28 January, 2025; originally announced January 2025.

Physics-Informed Transformation Toward Improving the Machine-Learned NLTE Models of ICF Simulations

Authors: Min Sang Cho, Paul E. Grabowski, Kowshik Thopalli, Thathachar S. Jayram, Michael J. Barrow, Jayaraman J. Thiagarajan, Rushil Anirudh, Hai P. Le, Howard A. Scott, Joshua B. Kallman, Branson C. Stephens, Mark E. Foord, Jim A. Gaffney, Peer-Timo Bremer

Abstract: The integration of machine learning techniques into Inertial Confinement Fusion (ICF) simulations has emerged as a powerful approach for enhancing computational efficiency. By replacing the costly Non-Local Thermodynamic Equilibrium (NLTE) model with machine learning models, significant reductions in calculation time have been achieved. However, determining how to optimize machine learning-based N… ▽ More The integration of machine learning techniques into Inertial Confinement Fusion (ICF) simulations has emerged as a powerful approach for enhancing computational efficiency. By replacing the costly Non-Local Thermodynamic Equilibrium (NLTE) model with machine learning models, significant reductions in calculation time have been achieved. However, determining how to optimize machine learning-based NLTE models in order to match ICF simulation dynamics remains challenging, underscoring the need for physically relevant error metrics and strategies to enhance model accuracy with respect to these metrics. Thus, we propose novel physics-informed transformations designed to emphasize energy transport, use these transformations to establish new error metrics, and demonstrate that they yield smaller errors within reduced principal component spaces compared to conventional transformations. △ Less

Submitted 13 November, 2024; originally announced November 2024.

Comments: 10 pages, 7 figures

Report number: LLNL-JRNL-869556

A universal neutral-atom quantum computer with individual optical addressing and non-destructive readout

Authors: A. G. Radnaev, W. C. Chung, D. C. Cole, D. Mason, T. G. Ballance, M. J. Bedalov, D. A. Belknap, M. R. Berman, M. Blakely, I. L. Bloomfield, P. D. Buttler, C. Campbell, A. Chopinaud, E. Copenhaver, M. K. Dawes, S. Y. Eubanks, A. J. Friss, D. M. Garcia, J. Gilbert, M. Gillette, P. Goiporia, P. Gokhale, J. Goldwin, D. Goodwin, T. M. Graham , et al. (33 additional authors not shown)

Abstract: Quantum computers must achieve large-scale, fault-tolerant operation to deliver on their promise of transformational processing power [1-4]. This will require thousands or millions of high-fidelity quantum gates and similar numbers of qubits [5]. Demonstrations using neutral-atom qubits trapped and manipulated by lasers have shown that this modality can provide high two-qubit gate (CZ) fidelities… ▽ More Quantum computers must achieve large-scale, fault-tolerant operation to deliver on their promise of transformational processing power [1-4]. This will require thousands or millions of high-fidelity quantum gates and similar numbers of qubits [5]. Demonstrations using neutral-atom qubits trapped and manipulated by lasers have shown that this modality can provide high two-qubit gate (CZ) fidelities and scalable operation [6-13]. However, the gates in these demonstrations are driven by lasers that do not resolve individual qubits, with universal computation enabled by physical mid-circuit shuttling of the qubits. This relatively slow operation may greatly extend runtimes for useful, large-scale computation. Here we demonstrate a universal neutral-atom quantum computer with gate rates limited by optical switching times, rather than shuttling, by individually addressing tightly focused laser beams at an array of single atoms. We achieve CZ fidelity of 99.35(4)% and local single-qubit RZ gate fidelity of 99.902(8)%. Moreover, we demonstrate non-destructive readout of alkali-atom qubits with 0.9(3)% loss, which boosts operational speed. This technique also enables us to measure a state-of-the-art CZ fidelity of 99.73(3)% when excluding atom-loss events, which may be mitigated through erasure conversion. Our results represent a critical step towards large-scale, fault-tolerant neutral-atom quantum computers that can execute computations on practical timescales. △ Less

Submitted 19 January, 2025; v1 submitted 15 August, 2024; originally announced August 2024.

Ionization Dynamics in Intense Laser-Produced Plasmas

Authors: M. S. Cho, A. L. Milder, W. Rozmus, H. P. Le, H. A. Scott, D. T. Bishel, D. Turnbull, S. B. Libby, M. E. Foord

Abstract: The ionization dynamic of argon plasma irradiated by an intense laser is investigated to understand transient physics in dynamic systems. This study demonstrates that significant delayed ionization responses and stepwise ionization processes are crucial factors in determining the ionization state of such systems. When an intense laser begins to ionize an initially cold argon plasma, the conditions… ▽ More The ionization dynamic of argon plasma irradiated by an intense laser is investigated to understand transient physics in dynamic systems. This study demonstrates that significant delayed ionization responses and stepwise ionization processes are crucial factors in determining the ionization state of such systems. When an intense laser begins to ionize an initially cold argon plasma, the conditions change rapidly, leading to a delayed response in ionization. Consequently, the dynamics do not reach a steady state, even if the electron temperature and density appear unchanged, particularly when the atomic transition process is not sufficiently rapid compared to the relevant time scales. Furthermore, in this case, numerous highly excited states are created primarily through collisional excitation. Thus, even low-energy photons can predominantly ionize plasmas, challenging the conventional belief that such photon energies insufficient to overcome the binding energy of bound electrons typically contribute less to the ionization. These findings underscore the necessity of incorporating these processes in ionization modeling within radiation hydrodynamic simulations for various laser-plasma experiments. △ Less

Submitted 18 July, 2024; originally announced July 2024.

Comments: 5 pages, 4 figures, 2page supplementary material

Report number: IM number: LLNL-JRNL-866584-DRAFT

Low-rank based motion correction followed by automatic frame selection in DT-CMR

Authors: Fanwen Wang, Pedro F. Ferreira, Camila Munoz, Ke Wen, Yaqing Luo, Jiahao Huang, Yinzhe Wu, Dudley J. Pennell, Andrew D. Scott, Sonia Nielles-Vallespin, Guang Yang

Abstract: Motivation: Post-processing of in-vivo diffusion tensor CMR (DT-CMR) is challenging due to the low SNR and variation in contrast between frames which makes image registration difficult, and the need to manually reject frames corrupted by motion. Goals: To develop a semi-automatic post-processing pipeline for robust DT-CMR registration and automatic frame selection. Approach: We used low intrinsic… ▽ More Motivation: Post-processing of in-vivo diffusion tensor CMR (DT-CMR) is challenging due to the low SNR and variation in contrast between frames which makes image registration difficult, and the need to manually reject frames corrupted by motion. Goals: To develop a semi-automatic post-processing pipeline for robust DT-CMR registration and automatic frame selection. Approach: We used low intrinsic rank averaged frames as the reference to register other low-ranked frames. A myocardium-guided frame selection rejected the frames with signal loss, through-plane motion and poor registration. Results: The proposed method outperformed our previous noise-robust rigid registration on helix angle data quality and reduced negative eigenvalues in healthy volunteers. △ Less

Submitted 19 June, 2024; originally announced June 2024.

Comments: Accepted as ISMRM 2024 Digital poster 2141

Journal ref: ISMRM 2024 Digital poster 2141

Plasma screening in mid-charged ions observed by K-shell line emission

Authors: M. Šmıd, O. Humphries, C. Baehtz, E. Brambrink, T. Burian, M. S. Cho, T. E. Cowan, L. Gaus, M. F. Gu, V. Hájková, L. Juha, Z. Konopkova, H. P. Le, M. Makita, X. Pan, T. Preston, A. Schropp, H. A. Scott, R. Štefanıková, J. Vorberger, W. Wang, U. Zastrau, K. Falk

Abstract: Dense plasma environment affects the electronic structure of ions via variations of the microscopic electrical fields, also known as plasma screening. This effect can be either estimated by simplified analytical models, or by computationally expensive and to date unverified numerical calculations. We have experimentally quantified plasma screening from the energy shifts of the bound-bound transiti… ▽ More Dense plasma environment affects the electronic structure of ions via variations of the microscopic electrical fields, also known as plasma screening. This effect can be either estimated by simplified analytical models, or by computationally expensive and to date unverified numerical calculations. We have experimentally quantified plasma screening from the energy shifts of the bound-bound transitions in matter driven by the x-ray free electron laser (XFEL). This was enabled by identification of detailed electronic configurations of the observed Kα, K\b{eta} and Kγ lines. This work paves the way for improving plasma screening models including connected effects like ionization potential depression and continuum lowering, which will advance the understanding of atomic physics in Warm Dense Matter regime. △ Less

Submitted 14 November, 2024; v1 submitted 10 June, 2024; originally announced June 2024.

Hydrogen plasma inhibits ion beam restructuring of materials

Authors: John A. Scott, James Bishop, Garrett Budnik, Milos Toth

Abstract: Focused ion beam (FIB) techniques are employed widely for nanofabrication, and processing of materials and devices. However, ion irradiation often gives rise to severe damage due to atomic displacements that cause defect formation, migration and clustering within the ion-solid interaction volume. The resulting restructuring degrades the functionality of materials, and limits the utility FIB ablati… ▽ More Focused ion beam (FIB) techniques are employed widely for nanofabrication, and processing of materials and devices. However, ion irradiation often gives rise to severe damage due to atomic displacements that cause defect formation, migration and clustering within the ion-solid interaction volume. The resulting restructuring degrades the functionality of materials, and limits the utility FIB ablation and nanofabrication techniques. Here we show that such restructuring can be inhibited by performing FIB irradiation in a hydrogen plasma environment via chemical pathways that modify defect binding energies and transport kinetics, as well as material ablation rates. The method is minimally-invasive and has the potential to greatly expand the utility of FIB nanofabrication techniques in processing of functional materials and devices. △ Less

Submitted 17 April, 2024; originally announced April 2024.

Ruddlesden-Popper chalcogenides push the limit of mechanical stiffness and glass-like thermal conductivity in single crystals

Authors: Md Shafkat Bin Hoque, Eric R. Hoglund, Boyang Zhao, De-Liang Bao, Hao Zhou, Sandip Thakur, Eric Osei-Agyemang, Khalid Hattar, Ethan A. Scott, Mythili Surendran, John A. Tomko, John T. Gaskins, Kiumars Aryana, Sara Makarem, Adie Alwen, Andrea Hodge, Ganesh Balasubramanian, Ashutosh Giri, Tianli Feng, Jordan A. Hachtel, Jayakanth Ravichandran, Sokrates T. Pantelides, Patrick E. Hopkins

Abstract: Insulating materials featuring ultralow thermal conductivity for diverse applications also require robust mechanical properties. Conventional thinking, however, which correlates strong bonding with high atomic-vibration-mediated heat conduction, led to diverse weakly bonded materials that feature ultralow thermal conductivity and low elastic moduli. One must, therefore, search for strongly-bonded… ▽ More Insulating materials featuring ultralow thermal conductivity for diverse applications also require robust mechanical properties. Conventional thinking, however, which correlates strong bonding with high atomic-vibration-mediated heat conduction, led to diverse weakly bonded materials that feature ultralow thermal conductivity and low elastic moduli. One must, therefore, search for strongly-bonded single crystals in which heat transport is impeded by other means. Here, we report intrinsic, glass-like, ultralow thermal conductivity and ultrahigh elastic-modulus/thermal-conductivity ratio in single-crystalline Ruddlesden-Popper Ban+1ZrnS3n+1, n = 2,3, which are derivatives of BaZrS3. Their key features are strong anharmonicity and intra-unit-cell rock-salt blocks. The latter produce strongly bonded intrinsic superlattices, impeding heat conduction by broadband reduction of phonon velocities and mean free paths and concomitant strong phonon localization. The present study initiates a paradigm of mechanically stiff phonon glasses. △ Less

Submitted 24 October, 2024; v1 submitted 5 December, 2023; originally announced December 2023.

Deep Learning-based Diffusion Tensor Cardiac Magnetic Resonance Reconstruction: A Comparison Study

Authors: Jiahao Huang, Pedro F. Ferreira, Lichao Wang, Yinzhe Wu, Angelica I. Aviles-Rivero, Carola-Bibiane Schonlieb, Andrew D. Scott, Zohya Khalique, Maria Dwornik, Ramyah Rajakulasingam, Ranil De Silva, Dudley J. Pennell, Sonia Nielles-Vallespin, Guang Yang

Abstract: In vivo cardiac diffusion tensor imaging (cDTI) is a promising Magnetic Resonance Imaging (MRI) technique for evaluating the micro-structure of myocardial tissue in the living heart, providing insights into cardiac function and enabling the development of innovative therapeutic strategies. However, the integration of cDTI into routine clinical practice is challenging due to the technical obstacles… ▽ More In vivo cardiac diffusion tensor imaging (cDTI) is a promising Magnetic Resonance Imaging (MRI) technique for evaluating the micro-structure of myocardial tissue in the living heart, providing insights into cardiac function and enabling the development of innovative therapeutic strategies. However, the integration of cDTI into routine clinical practice is challenging due to the technical obstacles involved in the acquisition, such as low signal-to-noise ratio and long scanning times. In this paper, we investigate and implement three different types of deep learning-based MRI reconstruction models for cDTI reconstruction. We evaluate the performance of these models based on reconstruction quality assessment and diffusion tensor parameter assessment. Our results indicate that the models we discussed in this study can be applied for clinical use at an acceleration factor (AF) of $\times 2$ and $\times 4$, with the D5C5 model showing superior fidelity for reconstruction and the SwinMR model providing higher perceptual scores. There is no statistical difference with the reference for all diffusion tensor parameters at AF $\times 2$ or most DT parameters at AF $\times 4$, and the quality of most diffusion tensor parameter maps are visually acceptable. SwinMR is recommended as the optimal approach for reconstruction at AF $\times 2$ and AF $\times 4$. However, we believed the models discussed in this studies are not prepared for clinical use at a higher AF. At AF $\times 8$, the performance of all models discussed remains limited, with only half of the diffusion tensor parameters being recovered to a level with no statistical difference from the reference. Some diffusion tensor parameter maps even provide wrong and misleading information. △ Less

Submitted 4 April, 2023; v1 submitted 31 March, 2023; originally announced April 2023.

Comments: 15 pages, 8 figures

Mid-circuit measurements on a single species neutral alkali atom quantum processor

Authors: T. M. Graham, L. Phuttitarn, R. Chinnarasu, Y. Song, C. Poole, K. Jooya, J. Scott, A. Scott, P. Eichler, M. Saffman

Abstract: We demonstrate mid-circuit measurements in a neutral atom array by shelving data qubits in protected hyperfine-Zeeman sub-states while non-destructively measuring an ancilla qubit. Measurement fidelity was enhanced using microwave repumping of the ancilla during the measurement. The coherence of the shelved data qubits was extended during the ancilla readout with dynamical decoupling pulses, after… ▽ More We demonstrate mid-circuit measurements in a neutral atom array by shelving data qubits in protected hyperfine-Zeeman sub-states while non-destructively measuring an ancilla qubit. Measurement fidelity was enhanced using microwave repumping of the ancilla during the measurement. The coherence of the shelved data qubits was extended during the ancilla readout with dynamical decoupling pulses, after which the data qubits are returned to mf = 0 computational basis states. We demonstrate that the quantum state of the data qubits is well preserved up to a constant phase shift with a state preparation and measurement (SPAM) corrected process fidelity of F = 97.0(5)%. The measurement fidelity on the ancilla qubit after correction for state preparation errors is F = 94.9(8)% and F = 95.3(1.1)% for |0> and |1> qubit states, respectively. We discuss extending this technique to repetitive quantum error correction using quadrupole recooling and microwave-based quantum state resetting. △ Less

Submitted 9 October, 2023; v1 submitted 17 March, 2023; originally announced March 2023.

Comments: v3: additional appendices with fidelity analysis added

Journal ref: PRX 13, 041051 (2023)

Decreasing ultrafast X-ray pulse durations with saturable absorption and resonant transitions

Authors: Sebastian Cardoch, Fabian Trost, Howard A. Scott, Henry N. Chapman, Carl Caleman, Nicusor Timneanu

Abstract: Saturable absorption is a nonlinear effect where a material's ability to absorb light is frustrated due to a high influx of photons and the creation of electron vacancies. Experimentally induced saturable absorption in copper revealed a reduction in the temporal duration of transmitted X-ray laser pulses, but a complete understanding of this process is still missing. In this computational work, we… ▽ More Saturable absorption is a nonlinear effect where a material's ability to absorb light is frustrated due to a high influx of photons and the creation of electron vacancies. Experimentally induced saturable absorption in copper revealed a reduction in the temporal duration of transmitted X-ray laser pulses, but a complete understanding of this process is still missing. In this computational work, we employ non-local thermodynamic equilibrium plasma simulations to study the interaction of femtosecond X-rays and copper. Following the onset of frustrated absorption, we find that a $K\text{--}M$ resonant transition occurring at highly charged states turns copper opaque again. The changes in absorption generate a transient transparent window responsible for the shortened transmission signal. We also propose using fluorescence induced by the incident beam as an alternative source to achieve shorter X-ray pulses. Intense femtosecond X-ray pulses are valuable to probe the structure and dynamics of biological samples or to reach extreme states of matter. Shortened pulses could be relevant for emerging imaging techniques. △ Less

Submitted 10 October, 2022; originally announced October 2022.

Journal ref: Phys. Rev. E 107, 015205 2023

Review of the 1st EUV Light Sources Code Comparison Workshop

Authors: J. Sheil, O. O. Versolato, V. Bakshi, H. A. Scott

Abstract: We review the results of the 1st Extreme Ultraviolet (EUV) Light Sources Code Comparison Workshop, which was held online on 3rd November 2020. The goal of this workshop was to provide a platform for specialists in EUV light source plasma modeling to benchmark and validate their numerical codes using well-defined case studies. Eight institutions spanning four countries contributed data to the works… ▽ More We review the results of the 1st Extreme Ultraviolet (EUV) Light Sources Code Comparison Workshop, which was held online on 3rd November 2020. The goal of this workshop was to provide a platform for specialists in EUV light source plasma modeling to benchmark and validate their numerical codes using well-defined case studies. Eight institutions spanning four countries contributed data to the workshop. Two topics were addressed, namely (i) the atomic kinetics and radiative properties of tin plasmas under EUV-generating conditions and (ii) laser absorption in a fully ionized, one-dimensional hydrogen plasma. In this paper, we summarize the key findings of the workshop and outline plans for future iterations of this code comparison activity. △ Less

Submitted 26 August, 2022; originally announced August 2022.

Suppression of surface roughening during ion bombardment of semiconductors

Authors: John A. Scott, James Bishop, Milos Toth

Abstract: Ion beams are used routinely for processing of semiconductors, particularly sputtering, ion implantation and direct-write fabrication of nanostructures. However, the utility of ion beam techniques is limited by crystal damage and surface roughening. Damage can be reduced or eliminated by performing irradiation at elevated temperatures. However, at these conditions, surface roughening is highly pro… ▽ More Ion beams are used routinely for processing of semiconductors, particularly sputtering, ion implantation and direct-write fabrication of nanostructures. However, the utility of ion beam techniques is limited by crystal damage and surface roughening. Damage can be reduced or eliminated by performing irradiation at elevated temperatures. However, at these conditions, surface roughening is highly problematic due to thermal mobility of adatoms and surface vacancies. Here we solve this problem using hydrogen gas, which we use to stabilize surface mass flow and suppress roughening during ion bombardment of elemental and compound semiconductors. We achieve smooth surfaces during ion-beam processing, and show that the method can be enhanced by radicalizing H2 gas using a remote plasma source. Our approach is broadly applicable, and expands the utility of ion beam techniques for the processing and fabrication of functional materials and nanostructures. △ Less

Submitted 19 September, 2022; v1 submitted 29 May, 2022; originally announced May 2022.

Comments: 14 pages, 5 figures

Random walk diffusion simulations in semi-permeable layered media with varying diffusivity

Authors: Ignasi Alemany, Jan N. Rose, Jérôme Garnier-Brun, Andrew D. Scott, Denis J. Doorly

Abstract: In this paper we present analytical and random walk based solutions to diffusion in semi-permeable layered media with varying diffusivity. We propose a new random walk transit model (hybrid model) based on treating the membrane permeability and the change in diffusion as two infinitesimal separate phenomena. By conducting an extensive analytical flux analysis, the performance of our hybrid model i… ▽ More In this paper we present analytical and random walk based solutions to diffusion in semi-permeable layered media with varying diffusivity. We propose a new random walk transit model (hybrid model) based on treating the membrane permeability and the change in diffusion as two infinitesimal separate phenomena. By conducting an extensive analytical flux analysis, the performance of our hybrid model is compared with a commonly used membrane model (reference model). We numerically demonstrate the limitations of the reference model and show the capability of our new model to overcome these restrictions. The suitability of both random walk transit models for the application to simulations of the diffusion tensor cardiovascular magnetic resonance (DT-CMR) is assessed in a histology-based domain. We consider a larger range of permeabilities to show the potential of our model to other possible applications beyond biological tissue. △ Less

Submitted 26 January, 2022; v1 submitted 24 January, 2022; originally announced January 2022.

Experiments conducted in the burning plasma regime with inertial fusion implosions

Authors: J. S. Ross, J. E. Ralph, A. B. Zylstra, A. L. Kritcher, H. F. Robey, C. V. Young, O. A. Hurricane, D. A. Callahan, K. L. Baker, D. T. Casey, T. Doeppner, L. Divol, M. Hohenberger, S. Le Pape, A. Pak, P. K. Patel, R. Tommasini, S. J. Ali, P. A. Amendt, L. J. Atherton, B. Bachmann, D. Bailey, L. R. Benedetti, L. Berzak Hopkins, R. Betti , et al. (127 additional authors not shown)

Abstract: An experimental program is currently underway at the National Ignition Facility (NIF) to compress deuterium and tritium (DT) fuel to densities and temperatures sufficient to achieve fusion and energy gain. The primary approach being investigated is indirect drive inertial confinement fusion (ICF), where a high-Z radiation cavity (a hohlraum) is heated by lasers, converting the incident energy into… ▽ More An experimental program is currently underway at the National Ignition Facility (NIF) to compress deuterium and tritium (DT) fuel to densities and temperatures sufficient to achieve fusion and energy gain. The primary approach being investigated is indirect drive inertial confinement fusion (ICF), where a high-Z radiation cavity (a hohlraum) is heated by lasers, converting the incident energy into x-ray radiation which in turn drives the DT fuel filled capsule causing it to implode. Previous experiments reported DT fuel gain exceeding unity [O.A. Hurricane et al., Nature 506, 343 (2014)] and then exceeding the kinetic energy of the imploding fuel [S. Le Pape et al., Phys. Rev. Lett. 120, 245003 (2018)]. We report on recent experiments that have achieved record fusion neutron yields on NIF, greater than 100 kJ with momentary fusion powers exceeding 1PW, and have for the first time entered the burning plasma regime where fusion alpha-heating of the fuel exceeds the energy delivered to the fuel via compression. This was accomplished by increasing the size of the high-density carbon (HDC) capsule, increasing energy coupling, while controlling symmetry and implosion design parameters. Two tactics were successful in controlling the radiation flux symmetry and therefore the implosion symmetry: transferring energy between laser cones via plasma waves, and changing the shape of the hohlraum. In conducting these experiments, we controlled for known sources of degradation. Herein we show how these experiments were performed to produce record performance, and demonstrate the data fidelity leading us to conclude that these shots have entered the burning plasma regime. △ Less

Submitted 8 November, 2021; originally announced November 2021.

Influence of atomic kinetics on inverse Bremsstrahlung heating and non-local thermal transport

Authors: H. P. Le, M. Sherlock, H. A. Scott

Abstract: This paper describes a computational model that self-consistently combines physics of kinetic electrons and atomic processes in a single framework. The formulation consists of a kinetic Vlasov- Boltzmann-Fokker-Planck equation for free electrons and a non-Maxwellian collisional-radiative model for atomic state populations. We utilize this model to examine the influence of atomic kinetics on invers… ▽ More This paper describes a computational model that self-consistently combines physics of kinetic electrons and atomic processes in a single framework. The formulation consists of a kinetic Vlasov- Boltzmann-Fokker-Planck equation for free electrons and a non-Maxwellian collisional-radiative model for atomic state populations. We utilize this model to examine the influence of atomic kinetics on inverse Bremsstrahlung (IB) heating and non-local thermal transport. We show that atomic kinetics affects non-linear IB absorption rates by further modifying the electron distribution in addition to laser heating. We also show that accurate modeling of non-local heat flow requires a self-consistent treatment of atomic kinetics, because the effective thermal conductivity strongly depends on the ionization balance of the plasma. △ Less

Submitted 8 July, 2019; v1 submitted 20 June, 2019; originally announced June 2019.

Comments: 8 pages, 6 figures

Report number: LLNL-JRNL-773648

Journal ref: Phys. Rev. E 100, 013202 (2019)

Review of the 10th Non-LTE Code Comparison Workshop

Authors: S. B. Hansen, H. -K. Chung, C. J. Fontes, Yu. Ralchenko, H. A. Scott, E. Stambulchik

Abstract: We report on the results of the 10th Non-LTE code comparison workshop, which was held at the University of San Diego campus November 28 through December 1, 2017. Non-equilibrium collisional-radiative models predict the electronic state populations and attendant emission and absorption characteristics of hot, dense matter and are used to help design and diagnose high-energy-density experiments. At… ▽ More We report on the results of the 10th Non-LTE code comparison workshop, which was held at the University of San Diego campus November 28 through December 1, 2017. Non-equilibrium collisional-radiative models predict the electronic state populations and attendant emission and absorption characteristics of hot, dense matter and are used to help design and diagnose high-energy-density experiments. At this workshop, fifteen codes from eleven institutions contributed results for steady-state and time-dependent neon, aluminum, silicon, and chlorine cases relevant to a variety of high-density experimental and radiation-driven astrophysical systems. This report focuses on differences in the predictions from codes with different internal structure, completeness, density effects, and rate fidelity and the impact of those differences on hot, dense plasma diagnostics. △ Less

Submitted 22 March, 2019; originally announced March 2019.

Comments: submitted to HEDP

Mitigating radiation damage of single photon detectors for space applications

Authors: Elena Anisimova, Brendon L. Higgins, Jean-Philippe Bourgoin, Miles Cranmer, Eric Choi, Danya Hudson, Louis P. Piche, Alan Scott, Vadim Makarov, Thomas Jennewein

Abstract: Single-photon detectors in space must retain useful performance characteristics despite being bombarded with sub-atomic particles. Mitigating the effects of this space radiation is vital to enabling new space applications which require high-fidelity single-photon detection. To this end, we conducted proton radiation tests of various models of avalanche photodiodes (APDs) and one model of photomult… ▽ More Single-photon detectors in space must retain useful performance characteristics despite being bombarded with sub-atomic particles. Mitigating the effects of this space radiation is vital to enabling new space applications which require high-fidelity single-photon detection. To this end, we conducted proton radiation tests of various models of avalanche photodiodes (APDs) and one model of photomultiplier tube potentially suitable for satellite-based quantum communications. The samples were irradiated with 106 MeV protons at doses approximately equivalent to lifetimes of 0.6 , 6, 12 and 24 months in a low-Earth polar orbit. Although most detection properties were preserved, including efficiency, timing jitter and afterpulsing probability, all APD samples demonstrated significant increases in dark count rate (DCR) due to radiation-induced damage, many orders of magnitude higher than the 200 counts per second (cps) required for ground-to-satellite quantum communications. We then successfully demonstrated the mitigation of this DCR degradation through the use of deep cooling, to as low as -86 degrees C. This achieved DCR below the required 200 cps over the 24 months orbit duration. DCR was further reduced by thermal annealing at temperatures of +50 to +100 degrees C. △ Less

Submitted 12 October, 2017; v1 submitted 3 February, 2017; originally announced February 2017.

Comments: The license has been corrected. Note that the license of v2 was incorrect and not valid. No other changes since v2

MSC Class: 81-05

Journal ref: EPJ Quantum Technol. 4, 10 (2017)

Capturing Structural Dynamics in Crystalline Silicon Using Chirped Electrons from a Laser Wakefield Accelerator

Authors: Z. -H He, B. Beaurepaire, J. A. Nees, G. Gallé, S. A. Scott, J. R. Sanchez Pérez, M. G. Lagally, K. Krushelnick, A. G. R. Thomas, J. Faure

Abstract: Recent progress in laser wakefield acceleration has led to the emergence of a new generation of electron and X-ray sources that may have enormous benefits for ultrafast science. These novel sources promise to become indispensable tools for the investigation of structural dynamics on the femtosecond time scale, with spatial resolution on the atomic scale. Here, we demonstrate the use of laser-wakef… ▽ More Recent progress in laser wakefield acceleration has led to the emergence of a new generation of electron and X-ray sources that may have enormous benefits for ultrafast science. These novel sources promise to become indispensable tools for the investigation of structural dynamics on the femtosecond time scale, with spatial resolution on the atomic scale. Here, we demonstrate the use of laser-wakefield-accelerated electron bunches for time-resolved electron diffraction measurements of the structural dynamics of single-crystal silicon nano-membranes pumped by an ultrafast laser pulse. In our proof-of-concept study, we resolve the silicon lattice dynamics on a picosecond time scale by deflecting the momentum-time correlated electrons in the diffraction peaks with a static magnetic field to obtain the time-dependent diffraction efficiency. Further improvements may lead to femtosecond temporal resolution, with negligible pump-probe jitter being possible with future laser-wakefield-accelerator ultrafast-electron-diffraction schemes. △ Less

Submitted 20 October, 2016; originally announced October 2016.

Comments: 12 pages, 4 figures

A new study of the $^{22}$Ne(p,$γ$)$^{23}$Na reaction deep underground: Feasibility, setup, and first observation of the 186 keV resonance

Authors: F. Cavanna, R. Depalo, M. -L. Menzel, M. Aliotta, M. Anders, D. Bemmerer, C. Broggini, C. G. Bruno, A. Caciolli, P. Corvisiero, T. Davinson, A. di Leva, Z. Elekes, F. Ferraro, A. Formicola, Zs. Fülöp, G. Gervino, A. Guglielmetti, C. Gustavino, Gy. Gyürky, G. Imbriani, M. Junker, R. Menegazzo, P. Prati, C. Rossi Alvarez , et al. (6 additional authors not shown)

Abstract: The $^{22}$Ne(p,$γ$)$^{23}$Na reaction takes part in the neon-sodium cycle of hydrogen burning. This cycle is active in asymptotic giant branch stars as well as in novae and contributes to the nucleosythesis of neon and sodium isotopes. In order to reduce the uncertainties in the predicted nucleosynthesis yields, new experimental efforts to measure the $^{22}$Ne(p,$γ$)$^{23}$Na cross section direc… ▽ More The $^{22}$Ne(p,$γ$)$^{23}$Na reaction takes part in the neon-sodium cycle of hydrogen burning. This cycle is active in asymptotic giant branch stars as well as in novae and contributes to the nucleosythesis of neon and sodium isotopes. In order to reduce the uncertainties in the predicted nucleosynthesis yields, new experimental efforts to measure the $^{22}$Ne(p,$γ$)$^{23}$Na cross section directly at the astrophysically relevant energies are needed. In the present work, a feasibility study for a $^{22}$Ne(p,$γ$)$^{23}$Na experiment at the Laboratory for Underground Nuclear Astrophysics (LUNA) 400\,kV accelerator deep underground in the Gran Sasso laboratory, Italy, is reported. The ion beam induced $γ$-ray background has been studied. The feasibility study led to the first observation of the $E_{\rm p}$ = 186\,keV resonance in a direct experiment. An experimental lower limit of 0.12\,$\times$\,10$^{-6}$\,eV has been obtained for the resonance strength. Informed by the feasibility study, a dedicated experimental setup for the $^{22}$Ne(p,$γ$)$^{23}$Na experiment has been developed. The new setup has been characterized by a study of the temperature and pressure profiles. The beam heating effect that reduces the effective neon gas density due to the heating by the incident proton beam has been studied using the resonance scan technique, and the size of this effect has been determined for a neon gas target. △ Less

Submitted 25 November, 2014; v1 submitted 11 November, 2014; originally announced November 2014.

Comments: Minor errors corrected; final version

Journal ref: Eur. Phys. J. A (2014) 50: 179

A derivation of the NS-alpha model and preliminary application to plane channel flow

Authors: K. Andrea Scott, F. S. Lien

Abstract: In this paper we consider the Navier-Stokes-$α$ (NS-$α$) model within a large-eddy simulation framework. An investigation is carried out using fully-developed turbulent channel flow at a fairly low Reynolds number. This is a flow where diffusion plays a prominent role, and presents a challenge to the nonlinear model investigated here. It is found that when $α^{2}_{k}$ is based on the mesh spacing,… ▽ More In this paper we consider the Navier-Stokes-$α$ (NS-$α$) model within a large-eddy simulation framework. An investigation is carried out using fully-developed turbulent channel flow at a fairly low Reynolds number. This is a flow where diffusion plays a prominent role, and presents a challenge to the nonlinear model investigated here. It is found that when $α^{2}_{k}$ is based on the mesh spacing, the NS-$α$ model has a tendency to tilt spanwise vorticity in the streamwise direction, leading to high skin friction. This is due to interaction between the spanwise vorticity, the model, and the streamwise streaks. To overcome this problem $α^{2}_{k}$ is damped in the streak affected region. Results overall demonstrate the potential of the model to reproduce some features of the DNS (helicity statistics and small-scale features), but more work is required before the full potential of the model can be achieved. In addition to the channel flow investigation, a derivation of the governing using Hamilton's principle is given. The derivation is intended to be clear and accessible to a wide audience, and contains a new interpretation of the model parameter. △ Less

Submitted 6 June, 2010; v1 submitted 7 April, 2010; originally announced April 2010.

Comments: 21 pages text, 9 figures. Submitted to Journal of Turbulence

Investigations of the NS-alpha model using a lid-driven cavity flow

Authors: K. A. Scott, F. S. Lien

Abstract: In this paper we investigate a subgrid model based on an anisotropic version of the NS-$α$ model using a lid-driven cavity flow at a Reynolds number of 10,000. Previously the NS-$α$ model has only been used numerically in the isotropic form. The subgrid model is developed from the Eulerian-averaged anisotropic equations [Holm, \textit{Physica D}, v.133, pp 215-269, 1999]. It was found that when… ▽ More In this paper we investigate a subgrid model based on an anisotropic version of the NS-$α$ model using a lid-driven cavity flow at a Reynolds number of 10,000. Previously the NS-$α$ model has only been used numerically in the isotropic form. The subgrid model is developed from the Eulerian-averaged anisotropic equations [Holm, \textit{Physica D}, v.133, pp 215-269, 1999]. It was found that when $α^{2}$ was based on the mesh numerical oscillations developed which manifested themselves in the appearance of streamwise vortices and a `mixing out' of the velocity profile. This is analogous to the Craik-Leibovich mechanism, with the difference being that the oscillations here are not physical but numerical. The problem could be traced back to the discontinuity in $α^{2}$ encountered when $α^{2}=0$ on the endwalls. An alternative definition of $α^{2}$ based on velocity gradients, rather than mesh spacing, is proposed and tested. Using this definition the results with the model shown a significant improvement. The splitting of the downstream wall jet, rms and shear stress profiles are correctly captured a coarse mesh. The model is shown to predict both positive and negative energy transfer in the jet impingement region, in qualitative agreement with DNS results. △ Less

Submitted 22 May, 2008; v1 submitted 2 November, 2007; originally announced November 2007.

Comments: 22 pages, 11 figures; changes to Section 2 and Section 4.2

Interaction of ultrashort X-ray pulses with B4C, SiC and Si

Authors: M. Bergh, N. Timneanu, S. P. Hau-Riege, H. A. Scott

Abstract: The interaction of 32.5 and 6 nm ultrashort X-ray pulses with the solid materials B4C, SiC and Si is simulated with a non-local thermodynamic equilibrium (NLTE) radiation transfer code. We study the ionization dynamics as function of depth in the material, modifications of the opacity during irradiation and estimate crater depth. Furthermore, we compare the estimated crater depth with experiment… ▽ More The interaction of 32.5 and 6 nm ultrashort X-ray pulses with the solid materials B4C, SiC and Si is simulated with a non-local thermodynamic equilibrium (NLTE) radiation transfer code. We study the ionization dynamics as function of depth in the material, modifications of the opacity during irradiation and estimate crater depth. Furthermore, we compare the estimated crater depth with experimental data, for fluences up to 2.2 J/cm2. Our results show that at 32.5 nm irradiation, the opacity changes with less than a factor of 2 for B4C and Si and a factor of 3 for SiC, for fluences up to 200 J/cm2. At a laser wavelength of 6 nm, the model predicts a dramatic decrease in opacity due to the weak inverse bremsstrahlung, increasing the crater depth for high fluences. △ Less

Submitted 27 September, 2007; originally announced September 2007.

Comments: 9 pages, 9 color figures

Detailed Radiative Transport Modeling of a Radiative Divertor

Authors: A. S. Wan, H. E. Dalhed, H. A. Scott, D. E. Post, T. D. Rognlien

Abstract: An effective radiative divertor maximizes the utilization of atomic processes to spread out the energy deposition to the divertor chamber walls and to reduce the peak heat flux. Because the mixture of neutral atoms and ions in the divertor can be optically thick to a portion of radiated power, it is necessary to accurately model the magnitude and distribution of line radiation in this complex re… ▽ More An effective radiative divertor maximizes the utilization of atomic processes to spread out the energy deposition to the divertor chamber walls and to reduce the peak heat flux. Because the mixture of neutral atoms and ions in the divertor can be optically thick to a portion of radiated power, it is necessary to accurately model the magnitude and distribution of line radiation in this complex region. To assess their importance we calculate the effects of radiation transport using CRETIN, a multi-dimensional, non-local thermodynamic equilibrium simulation code that includes the atomic kinetics and radiative transport processes necessary to model the complex environment of a radiative divertor. We also include neutral transport to model radiation from recycling neutral atoms. This paper presents a case study of a high-recycling radiative divertor with a typical large neutral pressure at the divertor plate to estimate the impact of H line radiation on the overall power balance in the divertor region with consideration for line opacities and atomic kinetics. △ Less

Submitted 11 July, 1995; originally announced July 1995.

Comments: Preprint for the 11th International Conference on Plasma Surface Interactions in Mito, Japan (1994), uuencoded and gzipped postscript with 3 figures, 15 pages