Showing 1–4 of 4 results for author: Schoukens, J

A nonlinear model of vortex-induced forces on an oscillating cylinder in a fluid flow

Authors: Jan Decuyper, Tim De Troyer, Koen Tiels, Johan Schoukens, Mark C. Runacres

Abstract: A nonlinear model relating the imposed motion of a circular cylinder, submerged in a fluid flow, to the transverse force coefficient is presented. The nonlinear fluid system, featuring vortex shedding patterns, limit cycle oscillations and synchronisation, is studied both for swept sine and multisine excitation. A nonparametric nonlinear distortion analysis (FAST) is used to distinguish odd from e… ▽ More A nonlinear model relating the imposed motion of a circular cylinder, submerged in a fluid flow, to the transverse force coefficient is presented. The nonlinear fluid system, featuring vortex shedding patterns, limit cycle oscillations and synchronisation, is studied both for swept sine and multisine excitation. A nonparametric nonlinear distortion analysis (FAST) is used to distinguish odd from even nonlinear behaviour. The information which is obtained from the nonlinear analysis is explicitly used in constructing a nonlinear model of the polynomial nonlinear state-space (PNLSS) type. The latter results in a reduction of the number of parameters and an increased accuracy compared to the generic modelling approach where typically no such information of the nonlinearity is used. The obtained model is able to accurately simulate time series of the transverse force coefficient over a wide range of the frequency-amplitude plane of imposed cylinder motion. △ Less

Submitted 10 June, 2020; originally announced June 2020.

Comments: Accepted for publication in Journal of Fluids and Structures

Phase-randomised Fourier transform model for the generation of synthetic wind speeds

Authors: D. D'Ambrosio, J. Schoukens, T. De Troyer, M. Zivanovic, M. C. Runacres

Abstract: The increasing sophistication of wind turbine design and control generates a need for high-quality data. Therefore, the relatively limited set of measured wind data may be extended with computer-generated surrogate data, e.g. to make reliable statistical studies of energy production and mechanical loads. This paper presents a data-driven, statistical model for the generation of realistic surrogate… ▽ More The increasing sophistication of wind turbine design and control generates a need for high-quality data. Therefore, the relatively limited set of measured wind data may be extended with computer-generated surrogate data, e.g. to make reliable statistical studies of energy production and mechanical loads. This paper presents a data-driven, statistical model for the generation of realistic surrogate time series that is based on the phase-randomised Fourier transform. The proposed model simulates an ergodic, pseudo-random process that makes use of an iterative rank-reordering procedure to yield synthetic time series that possess the power spectral density of the target data and concurrently converges to the probability distribution of the target data with an arbitrary, user-defined precision. A comparison with two established data-driven modelling techniques for generating surrogate wind speeds is presented. The proposed model is tested under the same input conditions given in the test cases of the selected models, and its performance is investigated in terms of the agreement with the target statistical descriptors. Simulation results show that the proposed model can reproduce with high fidelity the statistical descriptors of the input datasets and is able to capture the nonstationary diurnal and seasonal variations of the wind speed. △ Less

Submitted 26 February, 2021; v1 submitted 13 March, 2020; originally announced March 2020.

Improved Tactile Resonance Sensor for Robotic Assisted Surgery

Authors: David Oliva Uribe, Johan Schoukens, Ralf Stroop

Abstract: This paper presents an improved tactile sensor using a piezoelectric bimorph able to differentiate soft materials with similar mechanical characteristics. The final aim is to develop intelligent surgical tools for brain tumour resection using integrated sensors in order to improve tissue tumour delineation and tissue differentiation. The bimorph sensor is driven using a random phase multisine and… ▽ More This paper presents an improved tactile sensor using a piezoelectric bimorph able to differentiate soft materials with similar mechanical characteristics. The final aim is to develop intelligent surgical tools for brain tumour resection using integrated sensors in order to improve tissue tumour delineation and tissue differentiation. The bimorph sensor is driven using a random phase multisine and the properties of contact between the sensor's tip and a certain load are evaluated by means of the evaluation of the nonparametric FRF. An analysis of the nonlinear contributions is presented to show that the use of a linear model is feasible for the measurement conditions. A series of gelatine phantoms were tested. The tactile sensor is able to identify minimal differences in the consistency of the measured samples considering viscoelastic behaviour. A variance analysis was performed to evaluate the reliability of the sensors and to identify possible error sources due to inconsistencies in the preparation method of the phantoms. The results of the variance analysis are discussed showing that ability of the proposed tactile sensor to perform high quality measurements. △ Less

Submitted 2 May, 2018; originally announced May 2018.

Comments: 16 pages

Journal ref: published in Mechanical Systems and Signal Processing 2018

Nonlinear state-space modelling of the kinematics of an oscillating circular cylinder in a fluid flow

Authors: Jan Decuyper, Tim De Troyer, Mark Runacres, Koen Tiels, Johan Schoukens

Abstract: The flow-induced vibration of bluff bodies is an important problem of many marine, civil, or mechanical engineers. In the design phase of such structures, it is vital to obtain good predictions of the fluid forces acting on the structure. Current methods rely on computational fluid dynamic simulations (CFD), with a too high computational cost to be effectively used in the design phase or for contr… ▽ More The flow-induced vibration of bluff bodies is an important problem of many marine, civil, or mechanical engineers. In the design phase of such structures, it is vital to obtain good predictions of the fluid forces acting on the structure. Current methods rely on computational fluid dynamic simulations (CFD), with a too high computational cost to be effectively used in the design phase or for control applications. Alternative methods use heuristic mathematical models of the fluid forces, but these lack the accuracy (they often assume the system to be linear) or flexibility to be useful over a wide operating range. In this work we show that it is possible to build an accurate, flexible and low-computational-cost mathematical model using nonlinear system identification techniques. This model is data driven: it is trained over a user-defined region of interest using data obtained from experiments or simulations, or both. Here we use a Van der Pol oscillator as well as CFD simulations of an oscillating circular cylinder to generate the training data. Then a discrete-time polynomial nonlinear state-space model is fit to the data. This model relates the oscillation of the cylinder to the force that the fluid exerts on the cylinder. The model is finally validated over a wide range of oscillation frequencies and amplitudes, both inside and outside the so-called lock-in region. We show that forces simulated by the model are in good agreement with the data obtained from CFD. △ Less

Submitted 23 April, 2018; originally announced April 2018.