-
Aluminum nuclear demagnetization refrigerator for powerful continuous cooling
Authors:
Matthias Raba,
Sébastien Triqueneaux,
James Butterworth,
David Schmoranzer,
Emilio Barria,
Jérôme Debray,
Guillaume Donnier-Valentin,
Thibaut Gandit,
Anne Gerardin,
Johannes Goupy,
Olivier Tissot,
Eddy Collin,
Andrew Fefferman
Abstract:
Many laboratories routinely cool samples to 10 mK, but relatively few can cool condensed matter below 1 mK. Easy access to the microkelvin range would propel fields such as quantum sensors and quantum materials. Such temperatures are achieved with adiabatic nuclear demagnetization. Existing nuclear demagnetization refrigerators (NDR) are ``single-shot'', and the recycling time is incompatible with…
▽ More
Many laboratories routinely cool samples to 10 mK, but relatively few can cool condensed matter below 1 mK. Easy access to the microkelvin range would propel fields such as quantum sensors and quantum materials. Such temperatures are achieved with adiabatic nuclear demagnetization. Existing nuclear demagnetization refrigerators (NDR) are ``single-shot'', and the recycling time is incompatible with some sub-mK experiments. Furthermore, a high cooling power is required to overcome the excess heat load of order nW on NDR pre-cooled by cryogen-free dilution refrigerators. We report the performance of an aluminum NDR designed for powerful cooling when part of a dual stage continuous NDR (CNDR). Its thermal resistance is minimized to maximize the cycling rate of the CNDR and consequently its cooling power. At the same time, its susceptibility to eddy current heating is minimized. A CNDR based on two of the aluminum NDR presented here would achieve a cooling power of approximately 40 nW at 560 $μ$K less than six days after cooling from room temperature, with a small offset in electronic temperature that decreases as the time-dependent heat load decays.
△ Less
Submitted 25 July, 2024; v1 submitted 30 April, 2024;
originally announced April 2024.
-
Superconducting aluminum heat switch with 3 n$Ω$ equivalent resistance
Authors:
James Butterworth,
Sébastien Triqueneaux,
Šimon Midlik,
Ilya Golokolenov,
Anne Gerardin,
Thibaut Gandit,
Guillaume Donnier-Valentin,
Johannes Goupy,
M. Keith Phuthi,
David Schmoranzer,
Eddy Collin,
Andrew Fefferman
Abstract:
Superconducting heat switches with extremely low normal state resistances are needed for constructing continuous nuclear demagnetization refrigerators with high cooling power. Aluminum is a suitable superconductor for the heat switch because of its high Debye temperature and its commercial availability in high purity. We have constructed a high quality Al heat switch whose design is significantly…
▽ More
Superconducting heat switches with extremely low normal state resistances are needed for constructing continuous nuclear demagnetization refrigerators with high cooling power. Aluminum is a suitable superconductor for the heat switch because of its high Debye temperature and its commercial availability in high purity. We have constructed a high quality Al heat switch whose design is significantly different than that of previous heat switches. In order to join the Al to Cu with low contact resistance, we plasma etched the Al to remove its oxide layer then immediately deposited Au without breaking the vacuum of the e-beam evaporator. In the normal state of the heat switch, we measured a thermal conductance of $8 T$ W/K$^2$ which is equivalent to an electrical resistance of 3 n$Ω$ according to the Wiedemann-Franz law. In the superconducting state we measured a thermal conductance that is $2\times10^6$ times lower than that of the normal state at 50 mK.
△ Less
Submitted 23 April, 2022; v1 submitted 23 November, 2021;
originally announced November 2021.
-
Very low resistance Al/Cu joints for use at cryogenic temperatures
Authors:
Sébastien Triqueneaux,
James Butterworth,
Johannes Goupy,
Clément Ribas,
David Schmoranzer,
Eddy Collin,
Andrew Fefferman
Abstract:
We present two different techniques for achieving low resistance ($<$20 n$\rm Ω$) contacts between copper and aluminium at cryogenic temperatures. The best method is based on gold plating of the surfaces in an e-beam evaporator immediately after Ar plasma etching in the same apparatus, yielding resistances as low as 3 n$\rm Ω$ that are stable over time. The second approach involves inserting indiu…
▽ More
We present two different techniques for achieving low resistance ($<$20 n$\rm Ω$) contacts between copper and aluminium at cryogenic temperatures. The best method is based on gold plating of the surfaces in an e-beam evaporator immediately after Ar plasma etching in the same apparatus, yielding resistances as low as 3 n$\rm Ω$ that are stable over time. The second approach involves inserting indium in the Al/Cu joint. For both methods, we believe key elements are surface polishing, total removal of the aluminum oxide surface layer, and temporary application of large (typ. 11 kN) compression forces. We believe the values for gold plated contacts are the lowest ever reported for a Cu/Al joint of a few $\rm cm^{2}$. This technology could simplify the construction of thermal links for advanced cryogenics applications, in particular that of extremely low resistance heat switches for nuclear demagnetization refrigerators.
△ Less
Submitted 31 March, 2021; v1 submitted 4 September, 2020;
originally announced September 2020.
-
Thermal Radiation in Rayleigh-Bénard Convection Experiments
Authors:
P. Urban,
T. Králík,
P. Hanzelka,
V. Musilová,
T. Věžník,
D. Schmoranzer,
L. Skrbek
Abstract:
An important question in turbulent Rayleigh-Bénard convection (RBC) is the effectiveness of convective heat transport, which is conveniently described via the scaling of the Nusselt number (${\rm{Nu}}$) with the Rayleigh (${\rm{Ra}}$) and Prandtl (${\rm{Pr}}$) numbers. In RBC experiments, the heat supplied to the bottom plate is also partly transferred by thermal radiation. This heat transport cha…
▽ More
An important question in turbulent Rayleigh-Bénard convection (RBC) is the effectiveness of convective heat transport, which is conveniently described via the scaling of the Nusselt number (${\rm{Nu}}$) with the Rayleigh (${\rm{Ra}}$) and Prandtl (${\rm{Pr}}$) numbers. In RBC experiments, the heat supplied to the bottom plate is also partly transferred by thermal radiation. This heat transport channel, acting in parallel with the convective and conductive heat transport channels, is usually considered insignificant and thus neglected. Here we present a detailed analysis of conventional far-field as well as strongly enhanced near-field radiative heat transport occurring in various RBC experiments, and show that the radiative heat transfer partly explains differences in ${\rm{Nu}}$ measured in different experiments. A careful inclusion of the radiative transport appreciably changes the ${\rm{Nu}}={\rm{Nu}}({\rm{Ra}})$ scaling inferred in turbulent RBC experiments near ambient temperature utilizing gaseous nitrogen and sulphur hexafluoride as working fluids. On the other hand, neither the conventional far-field radiation nor the strongly enhanced near-field radiative heat transport appreciably affects the heat transport law deduced in cryogenic helium RBC experiments.
△ Less
Submitted 15 January, 2020;
originally announced January 2020.
-
Design Evaluation of Serial and Parallel sub-mK Continuous Nuclear Demagnetization Refrigerators
Authors:
D. Schmoranzer,
J. Butterworth,
S. Triqueneaux,
E. Collin,
A. Fefferman
Abstract:
We present the evaluation of two different design configurations of a two-stage PrNi$_5$ continuous nuclear demagnetization refrigerator. Serial and parallel configurations of the two stages are considered, with emphasis on the attainable cooling power at sub-mK temperatures and the impact of the design choices on the operation of the refrigerator. Numerical simulations of heat transfer in the set…
▽ More
We present the evaluation of two different design configurations of a two-stage PrNi$_5$ continuous nuclear demagnetization refrigerator. Serial and parallel configurations of the two stages are considered, with emphasis on the attainable cooling power at sub-mK temperatures and the impact of the design choices on the operation of the refrigerator. Numerical simulations of heat transfer in the setup are used to evaluate the performance of the refrigerator as well as the technological requirements for the essential thermal links. In accord with similar findings for adiabatic demagnetization refrigerators [Shirron, \emph{Cryogenics} \textbf{62}, 2014], our simulations show that the performance of both configurations improves as the thermal links improve, and that the parallel configuration yields a higher cooling power than the series design for a given thermal link resistance and sample temperature.
△ Less
Submitted 22 July, 2020; v1 submitted 3 December, 2019;
originally announced December 2019.
-
A 10 mK hermetic cell for eliminating parasitic heating in cryogen-free dilution refrigerators
Authors:
David Schmoranzer,
Sumit Kumar,
Sébastien Triqueneaux,
Xiao Liu,
Thomas Metcalf,
Glenn Jernigan,
Eddy Collin,
Andrew Fefferman
Abstract:
Cryogen-free dilution refrigerators generally simplify low temperature research but some types of samples, including superconducting qubits and other nanoelectronic devices, are affected by environmental heat sources such as stray photons or residual helium. We present the design and performance of a hermetic cell installed on the mixing chamber plate of a cryogen-free dilution refrigerator. The p…
▽ More
Cryogen-free dilution refrigerators generally simplify low temperature research but some types of samples, including superconducting qubits and other nanoelectronic devices, are affected by environmental heat sources such as stray photons or residual helium. We present the design and performance of a hermetic cell installed on the mixing chamber plate of a cryogen-free dilution refrigerator. The performance was quantified by measuring the dependence of the resonance frequency of a mechanical oscillator installed inside the cell on the mixing chamber temperature down to 10 mK. We found the expected logarithmic temperature dependence of the resonance frequency down to the lowest temperatures, demonstrating that the efficiency of the hermetic shield is significantly better than that of a simpler shield with no visible gaps.
△ Less
Submitted 8 November, 2019;
originally announced November 2019.
-
Cryogenic broadband vibration measurement on a cryogen-free dilution refrigerator
Authors:
D. Schmoranzer,
A. Luck,
E. Collin,
A. Fefferman
Abstract:
This manuscript reports a set of acceleration measurements in the frequency range from 0 to 50 kHz performed at the mixing chamber plate (2 axes) and the top flange (3 axes) of a cryogen-free dilution refrigerator. Various configurations of the support frame and coupling to the pulse tube compressor and motor have been tested, and the dominant contribution in the spectrum of vibrations is located,…
▽ More
This manuscript reports a set of acceleration measurements in the frequency range from 0 to 50 kHz performed at the mixing chamber plate (2 axes) and the top flange (3 axes) of a cryogen-free dilution refrigerator. Various configurations of the support frame and coupling to the pulse tube compressor and motor have been tested, and the dominant contribution in the spectrum of vibrations is located, surprisingly, near 20 kHz. Finally, the efficiency of various precautions in suppressing the observed vibration levels is illustrated.
△ Less
Submitted 16 November, 2018;
originally announced November 2018.
-
Development of a sub-mK Continuous Nuclear Demagnetization Refrigerator
Authors:
David Schmoranzer,
Rasul Gazizulin,
Sébastien Triqueneaux,
Eddy Collin,
Andrew Fefferman
Abstract:
We present the development of a two-stage PrNi$_5$ continuous demagnetization refrigerator at the Institut Néel/CNRS and numerical simulations of its performance. The thermal model used in the simulations is discussed in detail including the likely sources of heating. We demonstrate the effects of the critical thermal links including superconducting heat switches as well as the heat conductivity o…
▽ More
We present the development of a two-stage PrNi$_5$ continuous demagnetization refrigerator at the Institut Néel/CNRS and numerical simulations of its performance. The thermal model used in the simulations is discussed in detail including the likely sources of heating. We demonstrate the effects of the critical thermal links including superconducting heat switches as well as the heat conductivity of the PrNi$_5$, accounting for the dependence of cooling power on the PrNi$_5$ rod diameter. Our simulations show that if extreme care is taken to minimize the thermal resistance between the nuclear stages, a sample temperature of 1~mK can be maintained under a 20~nW heat load.
△ Less
Submitted 3 June, 2020; v1 submitted 20 September, 2018;
originally announced September 2018.
-
Thermal coupling of silicon oscillators in cryogen-free dilution refrigerators
Authors:
David Schmoranzer,
Sumit Kumar,
Annina Luck,
Eddy Collin,
Andrew Fefferman,
Xiao Liu,
Thomas Metcalf,
Glenn Jernigan
Abstract:
Silicon double paddle osillators (DPO) have been successfully used for measuring the elastic properties of amorphous films down to 10 mK (see for example \cite{Fefferman16,Liu14}). Until now, our group has used a wet dilution refrigerator for the lowest temperature measurements. We present measurements carried out on a Bluefors cryogen-free dilution refrigerator that demonstrate an extreme sensiti…
▽ More
Silicon double paddle osillators (DPO) have been successfully used for measuring the elastic properties of amorphous films down to 10 mK (see for example \cite{Fefferman16,Liu14}). Until now, our group has used a wet dilution refrigerator for the lowest temperature measurements. We present measurements carried out on a Bluefors cryogen-free dilution refrigerator that demonstrate an extreme sensitivity of the thermal coupling of the DPO to its environment. These measurements show that it is necessary to enclose the DPO in a shield at the mixing chamber (MXC) temperature. Any gaps in the shield limit its effectiveness, even if there is no line-of-sight path to the DPO. In the absence of a cryogenic hermetic shield surrounding the DPO, turning off the pulse tube while maintaining the MXC and still temperatures leads to heating of the DPO. This demonstrates that any heating of the sample due to pulse tube vibrations is a less important effect.
△ Less
Submitted 19 September, 2018;
originally announced September 2018.
