-
The effect of thermophoresis on the discharge parameters in complex plasma experiments
Authors:
Victor Land,
Jorge Carmona-Reyes,
James Creel,
Jimmy Schmoke,
Mike Cook,
Lorin Matthews,
Truell Hyde
Abstract:
Thermophoresis is a tool often applied in complex plasma experiments. One of the usual stated benefits over other experimental tools is that changes induced by thermophoresis neither directly depend on, nor directly influence, the plasma parameters. From electronic data, plasma emission profiles in the sheath, and Langmuir probe data in the plasma bulk, we conclude that this assumption does not ho…
▽ More
Thermophoresis is a tool often applied in complex plasma experiments. One of the usual stated benefits over other experimental tools is that changes induced by thermophoresis neither directly depend on, nor directly influence, the plasma parameters. From electronic data, plasma emission profiles in the sheath, and Langmuir probe data in the plasma bulk, we conclude that this assumption does not hold. An important effect on the levitation of dust particles in argon plasma is observed as well. The reason behind the changes in plasma parameters seems to be the change in neutral atom density accompanying the increased gas temperature while running at constant pressure.
△ Less
Submitted 20 October, 2010;
originally announced October 2010.
-
Low-Velocity Impacts on PVDF Targets Using a Light Gas Gun
Authors:
J. A. Carmona,
M. Cook,
J. Schmoke,
R. Laufer,
L. S. Matthews,
T. Hyde
Abstract:
Orbital debris is a constraint on the long-term health of any spacecraft and must be consi-dered during mission planning. Varying mechanisms have been proposed to quantify the problem. Accurate in-situ data is essential with various types of sensors designed to detect orbital debris impacts employed on space missions since the 1950's [1]. The earliest of these was the PZT (piezoelectric lead zirco…
▽ More
Orbital debris is a constraint on the long-term health of any spacecraft and must be consi-dered during mission planning. Varying mechanisms have been proposed to quantify the problem. Accurate in-situ data is essential with various types of sensors designed to detect orbital debris impacts employed on space missions since the 1950's [1]. The earliest of these was the PZT (piezoelectric lead zirconate tita-nate) sensor which was often used in-situ to measure the momentum of a particle at the time of impact. More recently, PVDF (Polyvinylidene fluoride) [2] has been employed as it exhibits piezoelectric capabilities along with the advantages of ruggedness, no bias re-quirement, ease of large area sensor construction, high counting rate capability, and space reliability, making it an ideal space debris sensor. Its large sensing sur-face area and ease of integration into a PZT sensor system makes it a desirable element in any in-situ space debris sensor.
△ Less
Submitted 19 October, 2010;
originally announced October 2010.
-
Investigation of Dust Wake Field Oscillations
Authors:
J. Kong,
T. Hyde,
L. Matthews,
M. Cook,
J. Schmoke,
J. Carmona-Reyes
Abstract:
Wakefield oscillations created by the ion wakefield existing below a dust particle within the plasma sheath generated above a powered lower electrode in a GEC rf reference cell carry information about the plasma sheath, the dust particle charge and the speed of the streaming ions. An experimental method to investigate such wakefield oscillations is discussed.
Wakefield oscillations created by the ion wakefield existing below a dust particle within the plasma sheath generated above a powered lower electrode in a GEC rf reference cell carry information about the plasma sheath, the dust particle charge and the speed of the streaming ions. An experimental method to investigate such wakefield oscillations is discussed.
△ Less
Submitted 24 July, 2007;
originally announced July 2007.
-
Low-Velocity Impacts on Targets Containing Embedded Carbon Nanotubes
Authors:
J. A. Carmona,
M. Cook,
J. Schmoke,
J. Reay,
T. W. Hyde
Abstract:
A one stage Light Gas Gun (LGG) at CASPER [1] was employed to test the shielding capabilities of tiles composed of four different laminated nanotube combinations. These target tiles were named CSNEAT1, CSCNT1, HYCNTUT1 and HYCNTT1. For calibration purposes, a 3003- aluminum plate was also impacted and the craters formed on the various composition tiles compared.
A one stage Light Gas Gun (LGG) at CASPER [1] was employed to test the shielding capabilities of tiles composed of four different laminated nanotube combinations. These target tiles were named CSNEAT1, CSCNT1, HYCNTUT1 and HYCNTT1. For calibration purposes, a 3003- aluminum plate was also impacted and the craters formed on the various composition tiles compared.
△ Less
Submitted 29 March, 2006;
originally announced March 2006.
-
Construction of a PZT Sensor Network for Low and Hypervelocity Impact Detection
Authors:
J. A. Carmona,
M. Cook,
M. Cooper,
J. Schmoke,
J. Reay,
L. Matthews,
T. Hyde
Abstract:
Orbital debris is a constraint on the long-term health of any spacecraft and must be considered during mission planning. Varying mechanisms have been proposed to quantify the problem. Assessment of orbital debris employing ground-based methods such as radar can help determine where debris clouds are located as well as their density or orbital trajectory. Such data is invaluable to computer simul…
▽ More
Orbital debris is a constraint on the long-term health of any spacecraft and must be considered during mission planning. Varying mechanisms have been proposed to quantify the problem. Assessment of orbital debris employing ground-based methods such as radar can help determine where debris clouds are located as well as their density or orbital trajectory. Such data is invaluable to computer simulations and can allow predictions of the debris environment over specific time periods [1]. Accurate in-situ data is essential as well with various types of sensors designed to detect orbital debris impacts employed on space missions since the 1950's [2]. One of the most common of these is the PZT (piezoelectric lead zirconate titanate) which is often used in-situ to measure the momentum of a particle at the time of impact. This paper will discuss a multiple PZT sensor system capable of determining both impactor momentum and location currently in development within CASPER.
△ Less
Submitted 10 January, 2005;
originally announced January 2005.
-
Impact Studies Using a One Stage Light Gas Gun
Authors:
Jorge Carmona,
Mike Cook,
Jimmy Schmoke,
Katie Harper,
Jerry Reay,
Lorin Matthews,
Truell Hyde
Abstract:
The Center for Astrophysics,Space Physics, and Engineering Research (CASPER) has completed construction and calibration of a Light Gas Gun (LGG), which is used for low velocity impact studies. At geosynchronous orbit, space debris can impact commercial satellites at velocities of 500 m/s [1] reducing their useful lifetime. Additionally, there is an ever-increasing population of abandoned nonoper…
▽ More
The Center for Astrophysics,Space Physics, and Engineering Research (CASPER) has completed construction and calibration of a Light Gas Gun (LGG), which is used for low velocity impact studies. At geosynchronous orbit, space debris can impact commercial satellites at velocities of 500 m/s [1] reducing their useful lifetime. Additionally, there is an ever-increasing population of abandoned nonoperational satellites and related debris in these orbits [2]. Therefore, it is important to clearly understand the physics behind how such collisions can cause structural damage. This is most easily determined by measuring the damage incurred on representative material exposed to test collisions in the laboratory. Data collected in this manner will not only help illuminate the shock physics involved but can also aid in providing methods for designing advanced shielding for satellites.
△ Less
Submitted 29 January, 2004;
originally announced January 2004.
-
Dusty Plasma Correlation Function Experiment
Authors:
B. Smith,
J. Vasut,
T. Hyde,
L. Matthews,
J. Reay,
M. Cook,
J. Schmoke
Abstract:
Dust particles immersed within a plasma environment, such as those in protostellar clouds, planetary rings or cometary environments, will acquire an electric charge. If the ratio of the inter-particle potential energy to the average kinetic energy is high enough the particles will form either a "liquid" structure with short-range ordering or a crystalline structure with long range ordering. Many…
▽ More
Dust particles immersed within a plasma environment, such as those in protostellar clouds, planetary rings or cometary environments, will acquire an electric charge. If the ratio of the inter-particle potential energy to the average kinetic energy is high enough the particles will form either a "liquid" structure with short-range ordering or a crystalline structure with long range ordering. Many experiments have been conducted over the past several years on such colloidal plasmas to discover the nature of the crystals formed, but more work is needed to fully understand these complex colloidal systems. Most previous experiments have employed monodisperse spheres to form Coulomb crystals. However, in nature (as well as in most plasma processing environments) the distribution of particle sizes is more randomized and disperse. This paper reports experiments which were carried out in a GEC rf reference cell modified for use as a dusty plasma system, using varying sizes of particles to determine the manner in which the correlation function depends upon the overall dust grain size distribution. (The correlation function determines the overall crystalline structure of the lattice.) Two dimensional plasma crystals were formed of assorted glass spheres with specific size distributions in an argon plasma. Using various optical techniques, the pair correlation function was determined and compared to those calculated numerically.
△ Less
Submitted 18 August, 2003;
originally announced August 2003.
