Showing 1–50 of 58 results for author: Schmid, F

A kinetic model to simulate charge flow through an electrochemical half cell

Authors: Diego Veloza-Diaz, Friederike Schmid, Robinson Cortes-Huerto, Pietro Ballone, Nancy C. Forero-Martinez

Abstract: A kinetic model of the electron transfer at the electrode / electrolyte solution interface is developed, implemented in a Monte Carlo framework, and applied to simulate this process in idealised systems consisting of the primitive model of electrolyte solutions limited by an impenetrable conducting surface. In the present implementation, a charged, spherical interface surrounding an equally spheri… ▽ More A kinetic model of the electron transfer at the electrode / electrolyte solution interface is developed, implemented in a Monte Carlo framework, and applied to simulate this process in idealised systems consisting of the primitive model of electrolyte solutions limited by an impenetrable conducting surface. In the present implementation, a charged, spherical interface surrounding an equally spherical sample of electrolyte solution is introduced to model a single-electrode system, providing the computational analog to the conceptual half-cell picture that is widely used in electrochemistry. The electron transfer itself is described as a simple surface hopping process underlying a first order reaction corresponding to one of the coupled M/M$^+$ and X$^-$/X half reactions. Then, the electron transfer at the interface is combined with the self-diffusion of ions in the electrolyte solutions whose role is to supply reagents and disperse products, allowing the system to settle in a stationary non-equilibrium state. Simulations for the primitive model of electrolyte in contact with a charged impenetrable surface show that, after a brief transient, the samples sustain a steady current through the electrolyte solution. The results quantify the dependence of the current on: the overall charge of the electrode, the electrolyte concentration, the solvent viscosity and the kinetic parameter $k_e$ that represents the rate of the electron transfer for each ion in contact with the electrode. Since the simulated interface is very idealised, strategies to overcome the limitations of the present model are outlined and briefly discussed. △ Less

Submitted 8 July, 2025; originally announced July 2025.

Micelle Forming Linear-Dendritic Block Copolymers: A Theoretical Comparison between Random Hyperbranched and Precise Dendrimer Polymer Architectures

Authors: Marios Giannakou, Oleg V. Borisov, Friederike Schmid

Abstract: Hyperbranched block copolymers offer a simpler and more efficient synthesis route compared to more traditional dendritic systems, while still providing exceptional control over surface functionality and self-assembly. This makes them ideal candidates for engineering nanoparticles with tailored properties for applications such as drug delivery and sensing. Here we use self-consistent field calculat… ▽ More Hyperbranched block copolymers offer a simpler and more efficient synthesis route compared to more traditional dendritic systems, while still providing exceptional control over surface functionality and self-assembly. This makes them ideal candidates for engineering nanoparticles with tailored properties for applications such as drug delivery and sensing. Here we use self-consistent field calculations to compare the micelle structures formed by copolymers with a polydisperse hyperbranched (LHBC), monodisperse dendritic (LDBC), and linear solvophilic blocks. Representative LHBC structures were generated by molecular dynamics simulations mimicking the slow-monomer addition protocol. We find that LHBC micelles are more stable, have a lower critical micelle concentration, and are better at accommodating larger drug payloads than LDBC micelles, and these properties further improve with increasing polydispersity. LHBC micelles also offer more terminal ends for functionalization than LDBC micelles for LDBCs with up to four branching generations, with the number of terminal ends being surprisingly independent of the LHBC polydispersity. Our findings highlight the superiority of LHBC micelles in flexibility and performance over LDBC micelles. △ Less

Submitted 2 June, 2025; originally announced June 2025.

Structure and Dynamic Evolution of Interfaces between Polymer Solutions and Gels and Polymer Interdiffusion: A Molecular Dynamics Study

Authors: Jude Ann Vishnu, Torsten Gereon Linder, Sebastian Seiffert, Friederike Schmid

Abstract: Letting free polymers diffuse from solution into a crosslinked polymer gel is often a crucial processing step in the synthesis of multiphase polymer-based gels, e.g., core-shell microgels. Here we use coarse-grained molecular dynamics simulations to obtain molecular insights into this process. We consider idealized situations where the gel is modeled as a regular polymer network with the topology… ▽ More Letting free polymers diffuse from solution into a crosslinked polymer gel is often a crucial processing step in the synthesis of multiphase polymer-based gels, e.g., core-shell microgels. Here we use coarse-grained molecular dynamics simulations to obtain molecular insights into this process. We consider idealized situations where the gel is modeled as a regular polymer network with the topology of a diamond lattice, and all free polymers and strands have the same length and consist of the same type of monomer. After bringing the gel and the polymer solution into contact, two time regimes are observed: An initial compression of the gel caused by the osmotic pressure of the solution, followed by an expansion due to swelling. We characterize the time evolution of density profiles, the penetration of free polymers into the gel and the connection between the gel and solution phase. The interfacial structure locally equilibrates after roughly 100 chain relaxation times. At late times, the free chains inside the gel undergo a percolation transition if the polymer concentration in the gel exceeds a critical value, which is of the same order as the overlap concentration. The fluctuations of the interface can be described by a capillary wave model that accounts for the elasticity of the gel. Based on this, we extract the interfacial tension of the gel-solution interface. Interestingly, both the interfacial tension and the local interfacial width increase with increasing free polymer concentration - in contrast to liquid-liquid interfaces, where these two quantities are typically anticorrelated. △ Less

Submitted 15 December, 2024; originally announced December 2024.

Journal ref: Macromolecules 2024 57 (11), 5545-5559

Nonlinear calcium King plot constrains new bosons and nuclear properties

Authors: A. Wilzewski, L. I. Huber, M. Door, J. Richter, A. Mariotti, L. J. Spieß, M. Wehrheim, S. Chen, S. A. King, P. Micke, M. Filzinger, M. R. Steinel, N. Huntemann, E. Benkler, P. O. Schmidt, J. Flannery, R. Matt, M. Stadler, R. Oswald, F. Schmid, D. Kienzler, J. Home, D. P. L. Aude Craik, S. Eliseev, P. Filianin , et al. (17 additional authors not shown)

Abstract: Nonlinearities in King plots (KP) of isotope shifts (IS) can reveal the existence of beyond-Standard-Model (BSM) interactions that couple electrons and neutrons. However, it is crucial to distinguish higher-order Standard Model (SM) effects from BSM physics. We measure the IS of the transitions ${{}^{3}P_{0}~\rightarrow~{}^{3}P_{1}}$ in $\mathrm{Ca}^{14+}$ and… ▽ More Nonlinearities in King plots (KP) of isotope shifts (IS) can reveal the existence of beyond-Standard-Model (BSM) interactions that couple electrons and neutrons. However, it is crucial to distinguish higher-order Standard Model (SM) effects from BSM physics. We measure the IS of the transitions ${{}^{3}P_{0}~\rightarrow~{}^{3}P_{1}}$ in $\mathrm{Ca}^{14+}$ and ${{}^{2}S_{1/2} \rightarrow {}^{2}D_{5/2}}$ in $\mathrm{Ca}^{+}$ with sub-Hz precision as well as the nuclear mass ratios with relative uncertainties below $4\times10^{-11}$ for the five stable, even isotopes of calcium (${}^{40,42,44,46,48}\mathrm{Ca}$). Combined, these measurements yield a calcium KP nonlinearity with a significance of $\sim 900 σ$. Precision calculations show that the nonlinearity cannot be fully accounted for by the expected largest higher-order SM effect, the second-order mass shift, and identify the little-studied nuclear polarization as the only remaining SM contribution that may be large enough to explain it. Despite the observed nonlinearity, we improve existing KP-based constraints on a hypothetical Yukawa interaction for most of the new boson masses between $10~\mathrm{eV/c^2}$ and $10^7~\mathrm{eV/c^2}$. △ Less

Submitted 13 December, 2024; originally announced December 2024.

Quantum control of a single $\mathrm{H}_2^+$ molecular ion

Authors: David Holzapfel, Fabian Schmid, Nick Schwegler, Oliver Stadler, Martin Stadler, Alexander Ferk, Jonathan P. Home, Daniel Kienzler

Abstract: Science is founded on the benchmarking of theoretical models against experimental measurements, with the challenge that for all but the simplest systems, the calculations required for high precision become extremely challenging. $\mathrm{H}_2^+$ is the simplest stable molecule, and its internal structure is calculable to high precision from first principles. This allows tests of theoretical models… ▽ More Science is founded on the benchmarking of theoretical models against experimental measurements, with the challenge that for all but the simplest systems, the calculations required for high precision become extremely challenging. $\mathrm{H}_2^+$ is the simplest stable molecule, and its internal structure is calculable to high precision from first principles. This allows tests of theoretical models and the determination of fundamental constants. However, studying $\mathrm{H}_2^+$ experimentally presents significant challenges. Standard control methods such as laser cooling, fluorescence detection and optical pumping are not applicable to $\mathrm{H}_2^+$ due to the very long lifetimes of its excited rotational and vibrational states. Here we solve this issue by using Quantum Logic Spectroscopy techniques to demonstrate full quantum control of a single $\mathrm{H}_2^+$ molecule by co-trapping it with an atomic 'helper' ion and performing quantum operations between the two ions. This enables us to perform pure quantum state preparation, coherent control and non-destructive readout, which we use to perform high-resolution microwave spectroscopy of $\mathrm{H}_2^+$. Our results pave the way for high precision spectroscopy of $\mathrm{H}_2^+$ in both the microwave and optical domains, while offering techniques which are transferable to other molecular ions. △ Less

Submitted 10 September, 2024; originally announced September 2024.

Stability and Elasticity of Ultrathin Sphere-Patterned Block Copolymer Films

Authors: Le Qiao, Daniel A. Vega, Friederike Schmid

Abstract: Sphere-patterned ultrathin block copolymers films are potentially interesting for a variety of applications in nanotechnology. We use self-consistent field theory to investigate the elastic response of sphere monolayer films with respect to in-plane shear, in-plane extension and compression deformations, and with respect to bending. The relations between the in-plane elastic moduli is roughly comp… ▽ More Sphere-patterned ultrathin block copolymers films are potentially interesting for a variety of applications in nanotechnology. We use self-consistent field theory to investigate the elastic response of sphere monolayer films with respect to in-plane shear, in-plane extension and compression deformations, and with respect to bending. The relations between the in-plane elastic moduli is roughly compatible with the expectations for two-dimensional elastic systems with hexagonal symmetry, with one notable exception: The pure shear and the simple shear moduli differ from each other by roughly 20%. Even more importantly, the bending constants are found to be negative, indicating that free-standing block copolymer membranes made of only sphere mono-layer are inherently unstable above the glass transition. Our results are discussed in view of experimental findings. △ Less

Submitted 28 April, 2024; originally announced April 2024.

Journal ref: Macromolecules 2024, XXXX, XXX, XXX-XXX

A Comprehensive Approach to Characterize Navigation Instruments for Magnetic Guidance in Biological Systems

Authors: Peter Blümler, Fabian Raudzus, Friederike Schmid

Abstract: The non-invasive spatiotemporal control of cellular functions, organization of tissues, and even the behavior of small animals has become paramount for advanced therapies. As magnetic fields do not interact with biological matter, their application is not only suitable for in vitro experiments but also for in vivo applications, even in deep tissues. Particularly, the remote manipulation of paramag… ▽ More The non-invasive spatiotemporal control of cellular functions, organization of tissues, and even the behavior of small animals has become paramount for advanced therapies. As magnetic fields do not interact with biological matter, their application is not only suitable for in vitro experiments but also for in vivo applications, even in deep tissues. Particularly, the remote manipulation of paramagnetic entities through magnetic instruments has emerged as a promising approach across various biological contexts. Despite similarities in basic experimental concepts, variations in the properties and descriptions of those magnetic instruments among the authors and studies resulted in a lack of reproducibility and comparability. Therefore, this article addresses the question of how to standardize the characterization of magnetic instruments. Our emphasis lies on the ability of magnetic systems to control the movement of paramagnetic objects such as ferro- or superparamagnetic particles, within organisms. This movement is achieved by exerting a force on magnetic particles by exposing them to a locally varying magnetic field. While it is well-known that the exerted force depends on the spatial variation (i.e. the gradient) of the magnetic field, the magnitude of the field is equally important. However, this second factor is often neglected in the literature. Therefore, we conduct a comprehensive analysis and discussion of both factors. Furthermore, we propose a novel descriptor, termed "effective gradient", which combines both dependencies. To illustrate, we characterize different magnet systems by calculating and comparing the different quantities and relating them to two experiments with different superparamagnetic nanoparticles. △ Less

Submitted 19 January, 2024; originally announced January 2024.

Comments: submitted to Scientific Reports

Stability of branched tubular membrane structures

Authors: Maike Jung, Gerhard Jung, Friederike Schmid

Abstract: We study the energetics and stability of branched tubular membrane structures by computer simulations of a triangulated network model. We find that triple (Y-)junctions can be created and stabilized by applying mechanical forces, if the angle between branches is 120 o . The same holds for tetrahedral junctions with tetraeder angles. If the wrong angles are enforced, the branches coalesce to a line… ▽ More We study the energetics and stability of branched tubular membrane structures by computer simulations of a triangulated network model. We find that triple (Y-)junctions can be created and stabilized by applying mechanical forces, if the angle between branches is 120 o . The same holds for tetrahedral junctions with tetraeder angles. If the wrong angles are enforced, the branches coalesce to a linear structure, a pure tube. After releasing the mechanical force, Y-branched structures remain metastable if one constrains the enclosed volume and the average curvature (the area difference) to a fixed value; tetrahedral junctions however split up into two Y-junctions. Somewhat counterintuitively, the energy cost of adding a Y-branch is negative in structures with fixed surface area and tube diameter, even if one accounts for the positive contribution of the additional branch end. For fixed average curvature, however, adding a branch also enforces a thinning of tubes, therefore the overall curvature energy cost is positive. Possible implications for the stability of branched networks structures in cells are discussed. △ Less

Submitted 15 January, 2024; originally announced January 2024.

Journal ref: Physical Review Letters 130, 148401 (2023)

A low repetition rate optical frequency comb

Authors: Francesco Canella, Johannes Weitenberg, Muhammad Thariq, Fabian Schmid, Paras Dwivedi, Gianluca Galzerano, Theodor W. Haensch, Thomas Udem, Akira Ozawa

Abstract: Reducing the pulse repetition rate of an optical frequency comb increases the pulse energy for a given average power. This enhances the efficiency of nonlinear frequency conversion and it facilitates extending the accessible wavelength range, for example into the extreme ultraviolet (XUV). The resulting spectrally dense frequency comb can still be used for precision spectroscopy of narrow atomic o… ▽ More Reducing the pulse repetition rate of an optical frequency comb increases the pulse energy for a given average power. This enhances the efficiency of nonlinear frequency conversion and it facilitates extending the accessible wavelength range, for example into the extreme ultraviolet (XUV). The resulting spectrally dense frequency comb can still be used for precision spectroscopy of narrow atomic or molecular transitions. In this article, we demonstrate a low-noise infrared frequency comb with a repetition rate as low as 40 kHz using a Yb:KYW mode-locked laser, pulse picking, and subsequent amplification. The frequency comb structure is confirmed by generating a beat note with a continuous wave reference laser. A comb mode is actively stabilized to the reference laser, and the integrated rms phase noise from 20 Hz to 20 kHz is measured to be 195 mrad. △ Less

Submitted 18 September, 2023; originally announced September 2023.

Nanodroplet Flight Control in Electrohydrodynamic Redox 3D Printing

Authors: Maxence Menétrey, Lukáš Zezulka, Pascal Fandré, Fabian Schmid, Ralph Spolenak

Abstract: Electrohydrodynamic 3D printing is an additive manufacturing technique with enormous potential in plasmonics, microelectronics, and sensing applications, thanks to its broad materials palette, high voxel deposition rate, and compatibility with various substrates. However, the electric field used to deposit material is concentrated at the depositing structure resulting in the focusing of the charge… ▽ More Electrohydrodynamic 3D printing is an additive manufacturing technique with enormous potential in plasmonics, microelectronics, and sensing applications, thanks to its broad materials palette, high voxel deposition rate, and compatibility with various substrates. However, the electric field used to deposit material is concentrated at the depositing structure resulting in the focusing of the charged droplets and geometry-dependent landing positions, which complicates the fabrication of complex 3D shapes. The low level of concordance between design and printout seriously impedes the development of electrohydrodynamic 3D printing and rationalizes the simplicity of the designs reported so far. In this work, we break the electric field centrosymmetry to study the resulting deviation in the flight trajectory of the droplets. Comparison of experimental outcomes with predictions of an FEM model provides new insights into the droplet characteristics and unveils how the product of droplet size and charge uniquely governs its kinematics. From these insights, we develop reliable predictions of the jet trajectory and allow the computation of optimized printing paths counterbalancing the electric field distortion, thereby enabling the fabrication of geometries with unprecedented complexity. △ Less

Submitted 16 August, 2023; originally announced August 2023.

Understanding and modeling polymers: The challenge of multiple scales

Authors: Friederike Schmid

Abstract: Polymer materials have the characteristic feature that they are multiscale systems by definition. Already the description of a single molecules involves a multitude of different scales, and cooperative processes in polymer assemblies are governed by the interplay of these scales. Polymers have been among the first materials for which systematic multiscale techniques were developed, yet they contin… ▽ More Polymer materials have the characteristic feature that they are multiscale systems by definition. Already the description of a single molecules involves a multitude of different scales, and cooperative processes in polymer assemblies are governed by the interplay of these scales. Polymers have been among the first materials for which systematic multiscale techniques were developed, yet they continue to present extraordinary challenges for modellers. In this perspective, we review popular models that are used to describe polymers on different scales and discuss scale bridging strategies such as static and dynamic coarse-graining methods and multiresolution approaches. We close with a list of hard problems which still need to be solved in order to gain a comprehensive quantitative understanding of polymer systems on all scales. △ Less

Submitted 17 December, 2022; originally announced December 2022.

Comments: to appear in ACS Polymers Au

Number-Resolved Detection of Dark Ions in Coulomb Crystals

Authors: Fabian Schmid, Johannes Weitenberg, Jorge Moreno, Theodor W. Hänsch, Thomas Udem, Akira Ozawa

Abstract: While it is straightforward to count laser-cooled trapped ions by fluorescence imaging, detecting the number of dark ions embedded and sympathetically cooled in a mixed ion crystal is more challenging. We demonstrate a method to track the number of dark ions in real time with single-particle sensitivity. This is achieved by observing discrete steps in the amount of fluorescence emitted from the co… ▽ More While it is straightforward to count laser-cooled trapped ions by fluorescence imaging, detecting the number of dark ions embedded and sympathetically cooled in a mixed ion crystal is more challenging. We demonstrate a method to track the number of dark ions in real time with single-particle sensitivity. This is achieved by observing discrete steps in the amount of fluorescence emitted from the coolant ions while exciting secular motional resonances of dark ions. By counting the number of fluorescence steps, we can identify the number of dark ions without calibration and without relying on any physical model of the motional excitation. We demonstrate the scheme by detecting H$_2^+$ and H$_3^+$ ions embedded in a Be$^+$ ion Coulomb crystal in a linear radio frequency trap. Our method allows observing the generation and destruction of individual ions simultaneously for different types of ions. Besides high-resolution spectroscopy of dark ions, another application is the detection of chemical reactions in real time with single-particle sensitivity. This is demonstrated in this work. △ Less

Submitted 5 October, 2022; originally announced October 2022.

Journal ref: Phys. Rev. A 106, L041101 (2022)

Fluctuation-Dissipation Relations Far from Equilibrium: A Case Study

Authors: Gerhard Jung, Friederike Schmid

Abstract: Fluctuation-dissipation relations or "theorems" (FDTs) are fundamental for statistical physics and can be rigorously derived for equilibrium systems. Their applicability to non-equilibrium systems is, however, debated. Here, we simulate an active microrheology experiment, in which a spherical colloid is pulled with a constant external force through a fluid, creating near-equilibrium and far-from-e… ▽ More Fluctuation-dissipation relations or "theorems" (FDTs) are fundamental for statistical physics and can be rigorously derived for equilibrium systems. Their applicability to non-equilibrium systems is, however, debated. Here, we simulate an active microrheology experiment, in which a spherical colloid is pulled with a constant external force through a fluid, creating near-equilibrium and far-from-equilibrium systems. We characterize the structural and dynamical properties of these systems, and reconstruct an effective generalized Langevin equation (GLE) for the colloid dynamics. Specifically, we test the validity of two FDTs: The first FDT relates the non-equilibrium response of a system to equilibrium correlation functions, and the second FDT relates the memory friction kernel in the GLE to the stochastic force. We find that the validity of the first FDT depends strongly on the strength of the external driving: it is fulfilled close to equilibrium and breaks down far from it. In contrast, we observe that the second FDT is always fulfilled. We provide a mathematical argument why this generally holds for memory kernels reconstructed from a deterministic Volterra equation for correlation functions, even for non-stationary non-equilibrium systems. Motivated by the Mori-Zwanzig formalism, we therefore suggest to impose an orthogonality constraint on the stochastic force, which is in fact equivalent to the validity of this Volterra equation. Such GLEs automatically satisfy the second FDT and are unique, which is desirable when using GLEs for coarse-grained modeling. △ Less

Submitted 14 September, 2021; v1 submitted 1 June, 2021; originally announced June 2021.

Comments: Typos corrected in the Appendix

Motional resonances of three-dimensional dual-species Coulomb crystals

Authors: Byoung-moo Ann, Fabian Schmid, Jonas Krause, Theodor W. Hänsch, Thomas Udem, Akira Ozawa

Abstract: We investigate the motional resonances of dual-species Coulomb crystals comprised of $^9$Be$^+$ and $^{24}$Mg$^+$ ions held in a 4-rod linear Paul trap. Our experimental data and simulations show that the secular motion of such mixed crystals has rich dynamics. Their secular spectra can differ significantly from those of pure ion crystals. We propose a simple model based on mechanical coupling wit… ▽ More We investigate the motional resonances of dual-species Coulomb crystals comprised of $^9$Be$^+$ and $^{24}$Mg$^+$ ions held in a 4-rod linear Paul trap. Our experimental data and simulations show that the secular motion of such mixed crystals has rich dynamics. Their secular spectra can differ significantly from those of pure ion crystals. We propose a simple model based on mechanical coupling with Coulomb interactions between the two different ion species that explains many features of the secular spectrum. Our findings contribute to a more reliable identification of the ion species in mixed crystals. △ Less

Submitted 15 February, 2021; originally announced February 2021.

Journal ref: J. Phys. B: At. Mol. Opt. Phys. 52 (2019) 035002

Simple phase noise measurement scheme for cavity-stabilized laser systems

Authors: Fabian Schmid, Johannes Weitenberg, Theodor W. Hänsch, Thomas Udem, Akira Ozawa

Abstract: We describe a simple method for measuring the residual fast phase noise of a cavity-stabilized laser using the cavity as a reference. The method is based on generating a beat note between the laser output and the strongly filtered light transmitted through the cavity. The beat note can be directly analyzed without requiring further calibration of system parameters. We apply the method to measure t… ▽ More We describe a simple method for measuring the residual fast phase noise of a cavity-stabilized laser using the cavity as a reference. The method is based on generating a beat note between the laser output and the strongly filtered light transmitted through the cavity. The beat note can be directly analyzed without requiring further calibration of system parameters. We apply the method to measure the residual phase noise of an external-cavity diode laser (ECDL) locked to a reference cavity and compare the results with an analysis of the in-loop error signal of the feedback system. △ Less

Submitted 15 February, 2021; originally announced February 2021.

Journal ref: Opt. Lett. 44, 2709-2712 (2019)

Polymer brushes with reversibly tunable grafting density

Authors: Leonid I. Klushin, Alexander M. Skvortsov, Alexey A. Polotsky, Anna S. Ivanova, Friederike Schmid

Abstract: We propose a novel class of responsive polymer brushes, where the effective grafting density can be controlled by external stimuli. This is achieved by using end-grafted polymer chains that have an affinity to the substrate. For sufficiently strong surface interactions, a fraction of chains condenses into a near-surface layer, while the remaining ones form the outer brush. The dense layer and the… ▽ More We propose a novel class of responsive polymer brushes, where the effective grafting density can be controlled by external stimuli. This is achieved by using end-grafted polymer chains that have an affinity to the substrate. For sufficiently strong surface interactions, a fraction of chains condenses into a near-surface layer, while the remaining ones form the outer brush. The dense layer and the more tenuous outer brush can be seen as coexisting microphases. The effective grafting density of the outer brush is controlled by the adsorption strength and can be changed reversibly and in a controlled way as a response to changes in environmental parameters. The effect is demonstrated by numerical SCF calculations and analyzed by scaling arguments. Since the thickness of the denser layer is about a few monomer sizes, its capacity to form a microphase is limited by the product of the brush chain length and the grafting density. We explore the range of chain lengths and grafting densities where the effect is most pronounced. In this range, the SCF studies suggest that individual chains inside the brush show large rapid fluctuations between two states that are separated by only a small free energy barrier. The behavior of the brush as a whole, however, does not reflect these large fluctuations, and the effective grafting density varies smoothly as a function of the control parameters. △ Less

Submitted 11 February, 2021; originally announced February 2021.

Comments: To appear in J. Chem. Phys

Simulation of Intravoxel Incoherent Perfusion Signal Using a Realistic Capillary Network of a Mouse Brain

Authors: Valerie Phi van, Franca Schmid, Georg Spinner, Sebastian Kozerke, Christian Federau

Abstract: Purpose: To simulate the intravoxel incoherent perfusion magnetic resonance magnitude signal from the motion of blood particles in three realistic vascular network graphs from a mouse brain. Methods: In three networks generated from the cortex of a mouse scanned by two-photon laser microscopy, blood flow in each vessel was simulated using Poiseuille law. The trajectories, flow speeds and phases ac… ▽ More Purpose: To simulate the intravoxel incoherent perfusion magnetic resonance magnitude signal from the motion of blood particles in three realistic vascular network graphs from a mouse brain. Methods: In three networks generated from the cortex of a mouse scanned by two-photon laser microscopy, blood flow in each vessel was simulated using Poiseuille law. The trajectories, flow speeds and phases acquired by a fixed number of simulated blood particles during a Stejskal-Tanner monopolar pulse gradient scheme were computed. The resulting magnitude signal as a function of b-value was obtained by integrating all phases and the pseudo-diffusion coefficient D* was estimated by fitting an exponential signal decay. To better understand the anatomical source of the IVIM perfusion signal, the above was repeated by restricting the simulation to various types of vessels. Results: The characteristics of the three microvascular networks were respectively: vessel lengths [mean +/- std. dev.]: 67.2 +/- 53.6 um, 59.8 +/- 46.2 um, and 64.5 +/- 50.9 um; diameters: 6.0 +/- 3.5 um, network 2: 5.7 +/- 3.6 um, and network 3: 6.1 +/- 3.7 um; simulated blood velocity: 0.9 +/- 1.7 um/ms, 1.4 +/- 2.5 um/ms and 0.7 +/- 2.1 um/ms. Exponential fitting of the simulated signal decay as a function of b-value resulted in the following D* [10-3 mm2/s]: 31.7, 40.4 and 33.4. The signal decay for low b-values was the largest in the larger vessels, but the smaller vessels and the capillaries accounted more to the total volume of the networks. Conclusion:This simulation improves the theoretical understanding of the IVIM perfusion estimation method by directly linking the MR IVIM perfusion signal to an ultra-high resolution measurement of the microvascular network and a realistic blood flow simulation. △ Less

Submitted 29 December, 2020; originally announced December 2020.

Comments: 22 pages, 5 Figures

Dynamic self-consistent field approach for studying kinetic processes in multiblock copolymer melts

Authors: Friederike Schmid, Bing Li

Abstract: The self-consistent field theory is a popular and highly successful theoretical framework for studying equilibrium (co)polymer systems at the mesoscopic level. Dynamic density functionals allow one to use this framework for studying dynamical processes in the diffusive, non-inertial regime. The central quantity in these approaches is the mobility function, which describes the effect of chain conne… ▽ More The self-consistent field theory is a popular and highly successful theoretical framework for studying equilibrium (co)polymer systems at the mesoscopic level. Dynamic density functionals allow one to use this framework for studying dynamical processes in the diffusive, non-inertial regime. The central quantity in these approaches is the mobility function, which describes the effect of chain connectivity on the nonlocal response of monomers to thermodynamic driving fields. In a recent study [Mantha et al, Macromolecules 53, 3409 (2020)], we have developed a method to systematically construct mobility functions from reference fine-grained simulations. Here we focus on melts of linear chains in the Rouse regime and show how the mobility functions can be calculated semi-analytically for multiblock copolymers with arbitrary sequences without resorting to simulations. In this context, an accurate approximate expression for the single-chain dynamic structure factor is derived. Several limiting regimes are discussed. Then we apply the resulting density functional theory to study ordering processes in a two-length scale block copolymer system after instantaneous quenches into the ordered phase. Different dynamical regimes in the ordering process are identified: At early times, the ordering on short scales dominates; at late times, the ordering on larger scales takes over. For large quench depths, the system does not necessarily relax into the true equilibrium state. Our density functional approach could be used for the computer-assisted design of quenching protocols in order to create novel nonequilibrium materials. △ Less

Submitted 11 February, 2021; v1 submitted 28 September, 2020; originally announced September 2020.

Comments: Some typos have been corrected

Journal ref: Polymers 12, 2205 (2020)

Simultaneous dual-species laser cooling using an optical frequency comb

Authors: D. Buhin, D. Kovacic, F. Schmid, M. Kruljac, V. Vulic, T. Ban, D. Aumiler

Abstract: We demonstrate 1D simultaneous laser cooling of $^{87}$Rb and $^{85}$Rb atoms using an optical frequency comb. By adjusting the pulse repetition frequency and the offset frequency, the frequency comb spectrum is tuned to ensure that two distinct frequency comb modes are simultaneously red-detuned from the cooling transitions, one mode for each species. Starting from a pre-cooled cloud of… ▽ More We demonstrate 1D simultaneous laser cooling of $^{87}$Rb and $^{85}$Rb atoms using an optical frequency comb. By adjusting the pulse repetition frequency and the offset frequency, the frequency comb spectrum is tuned to ensure that two distinct frequency comb modes are simultaneously red-detuned from the cooling transitions, one mode for each species. Starting from a pre-cooled cloud of $^{85,87}$Rb atoms at above-Doppler temperatures, we show simultaneous cooling of both species down to the Doppler temperature using two counter-propagating $σ$$^{+}$/$σ$$^{-}$-polarized beams from the frequency comb. The results indicate that simultaneous dual-species frequency comb cooling does not affect the cooling characteristics of individual atomic species. The results of this work imply that several atomic species could be cooled simultaneously using a single frequency comb source. This comb-based multi-channel laser cooling could bring significant advances in multi-species atom interferometers for space applications and in the study of multi-species interactions. △ Less

Submitted 2 June, 2020; originally announced June 2020.

Journal ref: Phys. Rev. A 102, 021101 (2020)

Poly-Sarcosine and Poly(ethylene-glycol) interactions with proteins investigated using molecular dynamics simulations

Authors: Giovanni Settanni, Timo Schäfer, Christian Muhl, Matthias Barz, Friederike Schmid

Abstract: Nanoparticles coated with hydrophilic polymers often show a reduction in unspecific interactions with the biological environment, which improves their biocompatibility. The molecular determinants of this reduction are not very well understood yet, and their knowledge may help improving nanoparticle design. Here we address, using molecular dynamics simulations, the interactions of human serum album… ▽ More Nanoparticles coated with hydrophilic polymers often show a reduction in unspecific interactions with the biological environment, which improves their biocompatibility. The molecular determinants of this reduction are not very well understood yet, and their knowledge may help improving nanoparticle design. Here we address, using molecular dynamics simulations, the interactions of human serum albumin, the most abundant serum protein, with two promising hydrophilic polymers used for the coating of therapeutic nanoparticles, poly(ethylene-glycol) and poly-sarcosine. By simulating the protein immersed in a polymer-water mixture, we show that the two polymers have a very similar affinity for the protein surface, both in terms of the amount of polymer adsorbed and also in terms of the type of amino acids mainly involved in the interactions. We further analyze the kinetics of adsorption and how it affects the polymer conformations. Minor differences between the polymers are observed in the thickness of the adsorption layer, that are related to the different degree of flexibility of the two molecules. In comparison poly-alanine, an isomer of poly-sarcosine known to self-aggregate and induce protein aggregation, shows a significantly larger affinity for the protein surface than PEG and PSar, which we show to be related not to a different patterns of interactions with the protein surface, but to the different way the polymer interacts with water. △ Less

Submitted 29 October, 2018; originally announced October 2018.

Generalized Langevin dynamics: Construction and numerical integration of non-Markovian particle-based models

Authors: Gerhard Jung, Martin Hanke, Friederike Schmid

Abstract: We propose a generalized Langevin dynamics (GLD) technique to construct non-Markovian particle-based coarse-grained models from fine-grained reference simulations and to efficiently integrate them. The proposed GLD model has the form of a discretized generalized Langevin equation with distance-dependent two-particle contributions to the self- and pair-memory kernels. The memory kernels are iterati… ▽ More We propose a generalized Langevin dynamics (GLD) technique to construct non-Markovian particle-based coarse-grained models from fine-grained reference simulations and to efficiently integrate them. The proposed GLD model has the form of a discretized generalized Langevin equation with distance-dependent two-particle contributions to the self- and pair-memory kernels. The memory kernels are iteratively reconstructed from the dynamical correlation functions of an underlying fine-grained system. We develop a simulation algorithm for this class of non-Markovian models that scales linearly with the number of coarse-grained particles. Our GLD method is suitable for coarse-grained studies of systems with incomplete time scale separation, as is often encountered, e.g., in soft matter systems. We apply the method to a suspension of nanocolloids with frequency-dependent hydrodynamic interactions. We show that the results from GLD simulations perfectly reproduce the dynamics of the underlying fine-grained system. The effective speedup of these simulations amounts to a factor of about $10^4$. Additionally, the transferability of the coarse-grained model with respect to changes of the nanocolloid density is investigated. The results indicate that the model is transferable to systems with nanocolloid densities that differ by up to one order of magnitude from the density of the reference system. △ Less

Submitted 15 November, 2018; v1 submitted 1 August, 2018; originally announced August 2018.

Comments: 16 pages, 6 figures, accepted by Soft Matter (https://pubs.rsc.org/en/content/articlelanding/2018/sm/c8sm01817k#!divAbstract)

Consistent description of UCN transport properties

Authors: S. Wlokka, P. Fierlinger, A. Frei, P. Geltenbort, S. Paul, T. Pöschl, F. Schmid, W. Schreyer, D. Steffen

Abstract: We have investigated the diffuse reflection probabilities of Replica guides for ultra-cold neutrons (UCN) using the so-called helium method. For the first time we could establish a consistent description of the diffuse reflection mechanism for different lengths of the guide system. The transmission of the guides is measured depending on the helium pressure inside of the guides. A series of simulat… ▽ More We have investigated the diffuse reflection probabilities of Replica guides for ultra-cold neutrons (UCN) using the so-called helium method. For the first time we could establish a consistent description of the diffuse reflection mechanism for different lengths of the guide system. The transmission of the guides is measured depending on the helium pressure inside of the guides. A series of simulations was done to reproduce the experimental data. These simulations showed that a diffuse reflection probability of $d = (3.0 \pm 0.5) \cdot 10^{-2}$ sufficiently describes the experimental data. △ Less

Submitted 25 January, 2017; originally announced January 2017.

Protein corona composition of PEGylated nanoparticles correlates strongly with amino acid composition of protein surface

Authors: Giovanni Settanni, Jiajia Zhou, Tongchuan Suo, Susanne Schöttler, Katharina Landfester, Friederike Schmid, Volker Mailänder

Abstract: Extensive molecular dynamics simulations reveal that the interactions between proteins and poly(ethylene glycol)(PEG) can be described in terms of the surface composition of the proteins. PEG molecules accumulate around non-polar residues while avoiding polar ones. A solvent-accessible-surface-area model of protein adsorption on PEGylated nanoparticles accurately fits a large set of data on the co… ▽ More Extensive molecular dynamics simulations reveal that the interactions between proteins and poly(ethylene glycol)(PEG) can be described in terms of the surface composition of the proteins. PEG molecules accumulate around non-polar residues while avoiding polar ones. A solvent-accessible-surface-area model of protein adsorption on PEGylated nanoparticles accurately fits a large set of data on the composition of the protein corona recently obtained by label-free proteomic mass spectrometry. △ Less

Submitted 28 December, 2016; originally announced December 2016.

Comments: submitted to Nanonscale on Sep. 5th 2016

Physical mechanisms of micro- and nanodomain formation in multicomponent lipid membranes

Authors: Friederike Schmid

Abstract: This article summarizes a variety of physical mechanisms proposed in the literature, which can generate micro- and nanodomains in multicomponent lipid bilayers and biomembranes. It mainly focusses on lipid-driven mechanisms that do not involve direct protein-protein interactions. Specifically, it considers (i) equilibrium mechanisms based on lipid-lipid phase separation such as critical cluster fo… ▽ More This article summarizes a variety of physical mechanisms proposed in the literature, which can generate micro- and nanodomains in multicomponent lipid bilayers and biomembranes. It mainly focusses on lipid-driven mechanisms that do not involve direct protein-protein interactions. Specifically, it considers (i) equilibrium mechanisms based on lipid-lipid phase separation such as critical cluster formation close to critical points, and multiple domain formation in curved geometries, (ii) equilibrium mechanisms that stabilize two-dimensional microemulsions, such as the effect of linactants and the effect of curvature-composition coupling in bilayers and monolayers, and (iii) non-equilibrium mechanisms induced by the interaction of a biomembrane with the cellular environment, such as membrane recycling and the pinning effects of the cytoplasm. Theoretical predictions are discussed together with simulations and experiments. The presentation is guided by the theory of phase transitions and critical phenomena, and the appendix summarizes the mathematical background in a concise way within the framework of the Ginzburg-Landau theory. △ Less

Submitted 13 November, 2016; originally announced November 2016.

Comments: Review, 217 references, to appear in BBA-biomembranes

Complex Formation between Polyelectrolytes and Oppositely Charged Oligoelectrolytes

Authors: Jiajia Zhou, Matthias Barz, Friederike Schmid

Abstract: We study the complex formation between one long polyanion chain and many short oligocation chains by computer simulations. We employ a coarse-grained bead-spring model for the polyelectrolyte chains, and model explicitly the small salt ions. We systematically vary the concentration and the length of the oligocation, and examine how the oligocations affects the chain conformation, the static struct… ▽ More We study the complex formation between one long polyanion chain and many short oligocation chains by computer simulations. We employ a coarse-grained bead-spring model for the polyelectrolyte chains, and model explicitly the small salt ions. We systematically vary the concentration and the length of the oligocation, and examine how the oligocations affects the chain conformation, the static structure factor, the radial and axial distribution of various charged species, and the number of bound ions in the complex. At low oligocation concentration, the polyanion has an extended structure. Upon increasing the oligocation concentration, the polyanion chain collapses and forms a compact globule, but the complex still carries a net negative charge. Once the total charge of the oligocations is equal to that of the polyanion, the collapse stops and is replaced by a slow expansion. In this regime, the net charge on the complexes is positive or neutral, depending on the microion concentration in solution. The expansion can be explained by the reduction of the oligocation bridging. We find that the behavior and the structure of the complex are largely independent of the length of oligocations, and very similar to that observed when replacing the oligocations by multivalent salt cations, and conclude that the main driving force keeping the complex together is the release of monovalent counterions and coions. We speculate on the implications of this finding for the problem of controlled oligolyte release and oligolyte substitution. △ Less

Submitted 6 April, 2016; originally announced April 2016.

Comments: 13 pages, 11 figures, submitted to J. Chem. Phys

Journal ref: J. Chem. Phys. 144, 164902 (2016)

Collective behavior of quorum-sensing run-and-tumble particles in confinement

Authors: Markus Rein, Nike Heinß, Friederike Schmid, Thomas Speck

Abstract: We study a generic model for quorum-sensing bacteria in circular confinement. Every bacterium produces signaling molecules, the local concentration of which triggers a response when a certain threshold is reached. If this response lowers the motility then an aggregation of bacteria occurs, which differs fundamentally from standard motility-induced phase separation due to the long-ranged nature of… ▽ More We study a generic model for quorum-sensing bacteria in circular confinement. Every bacterium produces signaling molecules, the local concentration of which triggers a response when a certain threshold is reached. If this response lowers the motility then an aggregation of bacteria occurs, which differs fundamentally from standard motility-induced phase separation due to the long-ranged nature of the concentration of signal molecules. We analyze this phenomenon analytically and by numerical simulations employing two different protocols leading to stationary cluster and ring morphologies, respectively. △ Less

Submitted 7 January, 2016; originally announced January 2016.

Comments: to appear in Phys. Rev. Lett

Journal ref: Phys. Rev. Lett. 116, 058102 (2016)

Interplay of curvature-induced micro- and nanodomain structures in multicomponent lipid bilayers

Authors: Leonie Brodbek, Friederike Schmid

Abstract: We discuss different mechanisms for curvature-induced domain formation in multicomponent lipid membranes and present a theoretical model that allows us to study the interplay between the domains. The model represents the membrane by two coupled monolayers, which each carry an additional order parameter field describing the local lipid composition. The spontaneous curvature of each monolayer is cou… ▽ More We discuss different mechanisms for curvature-induced domain formation in multicomponent lipid membranes and present a theoretical model that allows us to study the interplay between the domains. The model represents the membrane by two coupled monolayers, which each carry an additional order parameter field describing the local lipid composition. The spontaneous curvature of each monolayer is coupled to the local composition, moreover, the lipid compositions on opposing monolayers are coupled to each other. Using this model, we calculate the phase behavior of the bilayer in mean-field approximation. The resulting phase diagrams are surprisingly complex and reveal a variety of phases and phase transitions, including a decorated microdomain phase where nanodomains are aligned along the microdomain boundaries. Our results suggest that external membrane tension can be used to control the lateral organization of nanodomains (which might be associated with lipid "rafts") in a multicomponent lipid bilayer. △ Less

Submitted 11 November, 2015; v1 submitted 17 October, 2015; originally announced October 2015.

Comments: To appear in "Advances in Engineering Sciences and Applied Mathematics", Special Issue on "Biomembranes" - minor typos corrected

An efficient dissipative particle dynamics-based algorithm for simulating electrolyte solutions

Authors: Stefan Medina, Jiajia Zhou, Zhen-Gang Wang, Friederike Schmid

Abstract: We propose an efficient simulation algorithm based on the dissipative particle dynamics (DPD) method for studying electrohydrodynamic phenomena in electrolyte fluids. The fluid flow is mimicked with DPD particles while the evolution of the concentration of the ionic species is described using Brownian pseudo particles. The method is designed especially for systems with high salt concentrations, as… ▽ More We propose an efficient simulation algorithm based on the dissipative particle dynamics (DPD) method for studying electrohydrodynamic phenomena in electrolyte fluids. The fluid flow is mimicked with DPD particles while the evolution of the concentration of the ionic species is described using Brownian pseudo particles. The method is designed especially for systems with high salt concentrations, as explicit treatment of the salt ions becomes computationally expensive. For illustration, we apply the method to electro-osmotic flow over patterned, superhydrophobic surfaces. The results are in good agreement with recent theoretical predictions. △ Less

Submitted 1 January, 2015; v1 submitted 16 December, 2014; originally announced December 2014.

Comments: Typos in equations and references corrected; Journal of Chemical Physics, at press

The Structure of Cholesterol in Lipid Rafts

Authors: Laura Toppozini, Sebastian Meinhardt, Clare L. Armstrong, Zahra Yamani, Norbert Kucerka, Friederike Schmid, Maikel C. Rheinstaedter

Abstract: Rafts, or functional domains, are transient nano- or mesoscopic structures in the plasma membrane and are thought to be essential for many cellular processes such as signal transduction, adhesion, trafficking and lipid/protein sorting. Observations of these membrane heterogeneities have proven challenging, as they are thought to be both small and short-lived. With a combination of coarse-grained m… ▽ More Rafts, or functional domains, are transient nano- or mesoscopic structures in the plasma membrane and are thought to be essential for many cellular processes such as signal transduction, adhesion, trafficking and lipid/protein sorting. Observations of these membrane heterogeneities have proven challenging, as they are thought to be both small and short-lived. With a combination of coarse-grained molecular dynamics simulations and neutron diffraction using deuterium labeled cholesterol molecules we observe raft-like structures and determine the ordering of the cholesterol molecules in binary cholesterol-containing lipid membranes. From coarse-grained computer simulations, heterogenous membranes structures were observed and characterized as small, ordered domains. Neutron diffraction was used to study the lateral structure of the cholesterol molecules. We find pairs of strongly bound cholesterol molecules in the liquid-disordered phase, in accordance with the umbrella model. Bragg peaks corresponding to ordering of the cholesterol molecules in the raft-like structures were observed and indexed by two different structures: a monoclinic structure of ordered cholesterol pairs of alternating direction in equilibrium with cholesterol plaques, i.e., triclinic cholesterol bilayers. △ Less

Submitted 16 December, 2014; originally announced December 2014.

Comments: includes supplementary information

Journal ref: Physical Review Letters 113, 228101 (2014)

Sharp and fast: Sensors and switches based on polymer brushes with adsorption-active minority chains

Authors: Leonid I. Klushin, Alexander M. Skvortsov, Alexey A. Polotsky, Shuanhu Qi, Friederike Schmid

Abstract: We propose a design for polymer-based sensors and switches with sharp switching transition and fast response time. The switching mechanism involves a radical change in the conformations of adsorption-active minority chains in a brush. Such transitions can be induced by a temperature change of only about ten degrees, and the characteristic time of the conformational change is less than a second. We… ▽ More We propose a design for polymer-based sensors and switches with sharp switching transition and fast response time. The switching mechanism involves a radical change in the conformations of adsorption-active minority chains in a brush. Such transitions can be induced by a temperature change of only about ten degrees, and the characteristic time of the conformational change is less than a second. We present an analytical theory for these switches and support it by self-consistent field calculations and Brownian dynamics simulations. △ Less

Submitted 16 December, 2014; originally announced December 2014.

Comments: Highlighted as APS focus story in Physics 7, 83 (2014)

Journal ref: Physical Review Letters 113, 068303 (2014)

Computational studies of biomembrane systems: Theoretical considerations, simulation models, and applications

Authors: Markus Deserno, Kurt Kremer, Harald Paulsen, Christine Peter, Friederike Schmid

Abstract: This chapter summarizes several approaches combining theory, simulation and experiment that aim for a better understanding of phenomena in lipid bilayers and membrane protein systems, covering topics such as lipid rafts, membrane mediated interactions, attraction between transmembrane proteins, and aggregation in biomembranes leading to large superstructures such as the light harvesting complex of… ▽ More This chapter summarizes several approaches combining theory, simulation and experiment that aim for a better understanding of phenomena in lipid bilayers and membrane protein systems, covering topics such as lipid rafts, membrane mediated interactions, attraction between transmembrane proteins, and aggregation in biomembranes leading to large superstructures such as the light harvesting complex of green plants. After a general overview of theoretical considerations and continuum theory of lipid membranes we introduce different options for simulations of biomembrane systems, addressing questions such as: What can be learned from generic models? When is it expedient to go beyond them? And what are the merits and challenges for systematic coarse graining and quasi-atomistic coarse grained models that ensure a certain chemical specificity? △ Less

Submitted 16 December, 2014; originally announced December 2014.

Journal ref: Advances in Polymer Science 260, 237 (2014)

Flows and mixing in channels with misaligned superhydrophobic walls

Authors: Tatiana V. Nizkaya, Evgeny S. Asmolov, Jiajia Zhou, Friederike Schmid, Olga I. Vinogradova

Abstract: Aligned superhydrophobic surfaces with the same texture orientation reduce drag in the channel and generate secondary flows transverse to the direction of the applied pressure gradient. Here we show that a transverse shear can be easily generated by using superhydrophobic channels with misaligned textured surfaces. We propose a general theoretical approach to quantify this transverse flow by intro… ▽ More Aligned superhydrophobic surfaces with the same texture orientation reduce drag in the channel and generate secondary flows transverse to the direction of the applied pressure gradient. Here we show that a transverse shear can be easily generated by using superhydrophobic channels with misaligned textured surfaces. We propose a general theoretical approach to quantify this transverse flow by introducing the concept of an effective shear tensor. To illustrate its use, we present approximate theoretical solutions and Dissipative Particle Dynamics simulations for striped superhydrophobic channels. Our results demonstrate that the transverse shear leads to complex flow patterns, which provide a new mechanism of a passive vertical mixing at the scale of a texture period. Depending on the value of Reynolds number two different scenarios occur. At relatively low Reynolds number the flow represents a transverse shear superimposed with two co-rotating vortices. For larger Reynolds number these vortices become isolated, by suppressing fluid transport in the transverse direction. △ Less

Submitted 14 March, 2015; v1 submitted 23 September, 2014; originally announced September 2014.

Comments: 8 pages, 10 figures

Journal ref: Phys. Rev. E 91, 033020 (2015)

Fluctuations in lipid bilayers: Are they understood?

Authors: Friederike Schmid

Abstract: We review recent computer simulation studies of undulating lipid bilayers. Theoretical interpretations of such fluctuating membranes are most commonly based on generalized Helfrich-type elastic models, with additional contributions of local "protrusions" and/or density fluctuations. Such models provide an excellent basis for describing the fluctuations of tensionless bilayers in the fluid phase at… ▽ More We review recent computer simulation studies of undulating lipid bilayers. Theoretical interpretations of such fluctuating membranes are most commonly based on generalized Helfrich-type elastic models, with additional contributions of local "protrusions" and/or density fluctuations. Such models provide an excellent basis for describing the fluctuations of tensionless bilayers in the fluid phase at a quantitative level. However, this description is found to fail for membranes in the gel phase and for membranes subject to high tensions. The fluctuations of tilted gel membranes show a signature of the modulated ripple structure, which is a nearby phase observed in the pretransition regime between the fluid and tilted gel state. This complicates a quantitative analysis on mesoscopic length scales. In the case of fluid membranes under tension, the large-wavelength fluctuation modes are found to be significantly softer than predicted by theory. In the latter context, we also address the general problem of the relation between frame tension and the fluctuation tension, which has been discussed somewhat controversially in recent years. Simulations of very simple model membranes with fixed area show that the fluctuations should be controlled by the frame tension, and not by the internal tension. △ Less

Submitted 31 August, 2013; originally announced September 2013.

Comments: Invited Review article for Biophysical Reviews and Letters (written in 2012)

Effective slippage on superhydrophobic trapezoidal grooves

Authors: Jiajia Zhou, Evgeny S. Asmolov, Friederike Schmid, Olga I. Vinogradova

Abstract: We study the effective slippage on superhydrophobic grooves with trapezoidal cross-sections of various geometries (including the limiting cases of triangles and rectangular stripes), by using two complementary approaches. First, dissipative particle dynamics (DPD) simulations of a flow past such surfaces have been performed to validate an expression [E.S.Asmolov and O.I.Vinogradova, J. Fluid Mech.… ▽ More We study the effective slippage on superhydrophobic grooves with trapezoidal cross-sections of various geometries (including the limiting cases of triangles and rectangular stripes), by using two complementary approaches. First, dissipative particle dynamics (DPD) simulations of a flow past such surfaces have been performed to validate an expression [E.S.Asmolov and O.I.Vinogradova, J. Fluid Mech. \textbf{706}, 108 (2012)] that relates the eigenvalues of the effective slip-length tensor for one-dimensional textures. Second, we propose theoretical estimates for the effective slip length and calculate it numerically by solving the Stokes equation based on a collocation method. The comparison between the two approaches shows that they are in excellent agreement. Our results demonstrate that the effective slippage depends strongly on the area-averaged slip, the amplitude of the roughness, and on the fraction of solid in contact with the liquid. To interpret these results, we analyze flow singularities near slipping heterogeneities, and demonstrate that they inhibit the effective slip and enhance the anisotropy of the flow. Finally, we propose some guidelines to design optimal one-dimensional superhydrophobic surfaces, motivated by potential applications in microfluidics. △ Less

Submitted 17 October, 2013; v1 submitted 19 August, 2013; originally announced August 2013.

Comments: 11 pages, 8 figures, submitted to J. Chem. Phys

Journal ref: J. Chem. Phys. 139, 174708 (2013)

Elastic Properties and Line Tension of Self-Assembled Bilayer Membranes

Authors: Jianfeng Li, Kyle A. Pastor, An-Chang Shi, Friederike Schmid, Jiajia Zhou

Abstract: The elastic properties of a self-assembled bilayer membrane are studied using the self-consistent field theory, applied to a model system composed of flexible amphiphilic chains dissolved in hydrophilic polymeric solvents. Examining the free energy of bilayer membranes with different geometries allows us to calculate their bending modulus, Gaussian modulus, two fourth-order membrane moduli, and th… ▽ More The elastic properties of a self-assembled bilayer membrane are studied using the self-consistent field theory, applied to a model system composed of flexible amphiphilic chains dissolved in hydrophilic polymeric solvents. Examining the free energy of bilayer membranes with different geometries allows us to calculate their bending modulus, Gaussian modulus, two fourth-order membrane moduli, and the line tension. The dependence of these parameters on the microscopic characteristics of the amphiphilic chain, characterized by the volume fraction of the hydrophilic component, is systematically studied. The theoretical predictions are compared with the results from a simple monolayer model, which approximates a bilayer membrane by two monolayers. Finally the region of validity of the linear elasticity theory is analyzed by examining the higher-order contributions. △ Less

Submitted 17 July, 2013; v1 submitted 1 July, 2013; originally announced July 2013.

Comments: 14 pages, 9 figures, submitted to Phys. Rev. E

Journal ref: Phys. Rev. E 88, 012718 (2013)

Monolayer curvature stabilizes nanoscale raft domains in mixed lipid bilayers

Authors: Sebastian Meinhardt, Richard L. C. Vink, Friederike Schmid

Abstract: According to the lipid raft hypothesis, biological lipid membranes are laterally heterogeneous and filled with nanoscale ordered "raft" domains, which are believed to play an important role for the organization of proteins in membranes. However, the mechanisms stabilizing such small rafts are not clear, and even their existence is sometimes questioned. Here we report the observation of raft-like s… ▽ More According to the lipid raft hypothesis, biological lipid membranes are laterally heterogeneous and filled with nanoscale ordered "raft" domains, which are believed to play an important role for the organization of proteins in membranes. However, the mechanisms stabilizing such small rafts are not clear, and even their existence is sometimes questioned. Here we report the observation of raft-like structures in a coarse-grained molecular model for multicomponent lipid bilayers. On small scales, our membranes demix into a liquid ordered (lo) and a liquid disordered (ld) phase. On large scales, phase separation is suppressed and gives way to a microemulsion-type state that contains nanometer size lo domains in a ld environment. Furthermore, we introduce a mechanism that generates rafts of finite size by a coupling between monolayer curvature and local composition. We show that mismatch between the spontaneous curvatures of monolayers in the lo and ld phase induces elastic interactions, which reduce the line tension between the lo and ld phase and can stabilize raft domains with a characteristic size of the order of a few nanometers. Our findings suggest that rafts in multicomponent bilayers might be closely related to the modulated ripple phase in one-component bilayers. △ Less

Submitted 20 March, 2013; originally announced March 2013.

Comments: PNAS, at press

Effective slip-length tensor for a flow over weakly slipping stripes

Authors: Evgeny S. Asmolov, Jiajia Zhou, Friederike Schmid, Olga I. Vinogradova

Abstract: We discuss the flow past a flat heterogeneous solid surface decorated by slipping stripes. The spatially varying slip length, $b(y)$, is assumed to be small compared to the scale of the heterogeneities, $L$, but finite. For such "weakly" slipping surfaces, earlier analyses have predicted that the effective slip length is simply given by the surface-averaged slip length, which implies that the effe… ▽ More We discuss the flow past a flat heterogeneous solid surface decorated by slipping stripes. The spatially varying slip length, $b(y)$, is assumed to be small compared to the scale of the heterogeneities, $L$, but finite. For such "weakly" slipping surfaces, earlier analyses have predicted that the effective slip length is simply given by the surface-averaged slip length, which implies that the effective slip-length tensor becomes isotropic. Here we show that a different scenario is expected if the local slip length has step-like jumps at the edges of slipping heterogeneities. In this case, the next-to-leading term in an expansion of the effective slip-length tensor in powers of ${max}\,(b(y)/L)$ becomes comparable to the leading-order term, but anisotropic, even at very small $b(y)/L$. This leads to an anisotropy of the effective slip, and to its significant reduction compared to the surface-averaged value. The asymptotic formulae are tested by numerical solutions and are in agreement with results of dissipative particle dynamics simulations. △ Less

Submitted 24 October, 2013; v1 submitted 26 December, 2012; originally announced December 2012.

Comments: 11 pages, 4 figures, submitted to Phys. Rev. E

Journal ref: Phys. Rev. E 88, 023004 (2013)

Separation of chiral particles in micro- or nanofluidic channels

Authors: Sebastian Meinhardt, Jens Smiatek, Ralf Eichhorn, Friederike Schmid

Abstract: We propose a method to separate enantiomers in microfluidic or nanofluidic channels. It requires flow profiles which break chiral symmetry and have regions with high local shear. Such profiles can be generated in channels confined by walls with different hydrodynamic boundary conditions (e.g. slip lengths). Due to a nonlinear hydrodynamic effect, particles with different chirality migrate at diffe… ▽ More We propose a method to separate enantiomers in microfluidic or nanofluidic channels. It requires flow profiles which break chiral symmetry and have regions with high local shear. Such profiles can be generated in channels confined by walls with different hydrodynamic boundary conditions (e.g. slip lengths). Due to a nonlinear hydrodynamic effect, particles with different chirality migrate at different speed and can be separated. The mechanism is demonstrated by computer simulations. We investigate the influence of thermal fluctuations (i.e. the Péclet number) and show that the effect disappears in the linear response regime. The details of the microscopic flow are important and determine which volume forces are necessary to achieve separation. △ Less

Submitted 18 April, 2012; originally announced April 2012.

Comments: Accepted for publication in Physical Review Letters

Reply to Comment on: "Are stress-free membranes really 'tensionless'?"

Authors: Friederike Schmid

Abstract: This is a reply to a comment on the paper arXiv:1204.2075 "Are stress-free membranes really tensionless ?" (EPL 95,28008 (2011)). This is a reply to a comment on the paper arXiv:1204.2075 "Are stress-free membranes really tensionless ?" (EPL 95,28008 (2011)). △ Less

Submitted 11 April, 2012; originally announced April 2012.

Journal ref: EPL 97, 18002 (2012)

Membrane-mediated protein-protein interaction: A Monte Carlo study

Authors: Joerg Neder, Beate West, Peter Nielaba, Friederike Schmid

Abstract: We investigate membrane-mediated interactions between transmembrane proteins using coarse-grained models. We compare the effective potential of mean force (PMF) between two proteins, which are always aligned parallel to the z-axis of the simulation box, with those PMFs obtained for proteins with fluctuating orientations. The PMFs are dominated by an oscillatory packing-driven contribution and a sm… ▽ More We investigate membrane-mediated interactions between transmembrane proteins using coarse-grained models. We compare the effective potential of mean force (PMF) between two proteins, which are always aligned parallel to the z-axis of the simulation box, with those PMFs obtained for proteins with fluctuating orientations. The PMFs are dominated by an oscillatory packing-driven contribution and a smooth attractive hydrophobic mismatch contribution, which vanishes if the hydrophobic length of the protein matches the thickness of the membrane. If protein orientations are allowed to fluctuate, the oscillations are greatly reduced compared to proteins with fixed orientation. Furthermore, the hydrophobic mismatch interaction has a smaller range. Finally, we compare the two-dimensional thickness profiles around two proteins with the predictions from the elastic theory of two coupled monolayers, and find them to be in very good agreement. △ Less

Submitted 10 April, 2012; originally announced April 2012.

Journal ref: Current Nanoscience 7, 656 (2011)

Mesoscopic Simulations of Electroosmotic Flow and Electrophoresis in Nanochannels

Authors: Jens Smiatek, Friederike Schmid

Abstract: We review recent dissipative particle dynamics (DPD) simulations of electrolyte flow in nanochannels. A method is presented by which the slip length $delta_B$ at the channel boundaries can be tuned systematically from negative to infinity by introducing suitably adjusted wall-fluid friction forces. Using this method, we study electroosmotic flow (EOF) in nanochannels for varying surface slip condi… ▽ More We review recent dissipative particle dynamics (DPD) simulations of electrolyte flow in nanochannels. A method is presented by which the slip length $delta_B$ at the channel boundaries can be tuned systematically from negative to infinity by introducing suitably adjusted wall-fluid friction forces. Using this method, we study electroosmotic flow (EOF) in nanochannels for varying surface slip conditions and fluids of different ionic strength. Analytic expressions for the flow profiles are derived from the Stokes equation, which are in good agreement with the numerical results. Finally, we investigate the influence of EOF on the effective mobility of polyelectrolytes in nanochannels. The relevant quantity characterizing the effect of slippage is found to be the dimensionless quantity $κδ_B$, where $1/κ$ is an effective electrostatic screening length at the channel boundaries. △ Less

Submitted 10 April, 2012; originally announced April 2012.

Journal ref: Computer Physics Communications 182, 1941 (2011)

Anisotropic flow in striped superhydrophobic channels

Authors: Jiajia Zhou, Aleksey V. Belyaev, Friederike Schmid, Olga I. Vinogradova

Abstract: We report results of dissipative particle dynamics simulations and develop a semi-analytical theory of an anisotropic flow in a parallel-plate channel with two superhydrophobic striped walls. Our approach is valid for any local slip at the gas sectors and an arbitrary distance between the plates, ranging from a thick to a thin channel. It allows us to optimize area fractions, slip lengths, channel… ▽ More We report results of dissipative particle dynamics simulations and develop a semi-analytical theory of an anisotropic flow in a parallel-plate channel with two superhydrophobic striped walls. Our approach is valid for any local slip at the gas sectors and an arbitrary distance between the plates, ranging from a thick to a thin channel. It allows us to optimize area fractions, slip lengths, channel thickness and texture orientation to maximize a transverse flow. Our results may be useful for extracting effective slip tensors from global measurements, such as the permeability of a channel, in experiments or simulations, and may also find applications in passive microfluidic mixing. △ Less

Submitted 2 May, 2012; v1 submitted 6 April, 2012; originally announced April 2012.

Comments: 11 pages, 10 figures, submitted to J. Chem. Phys

Journal ref: J. Chem. Phys. 136, 194706 (2012)

A method to compute absolute free energies or enthalpies of fluids

Authors: Friederike Schmid, Tanja Schilling

Abstract: We propose a new method to compute the free energy or enthalpy of fluids or disordered solids by computer simulation . The main idea is to construct a reference system by freezing one representative configuration, and then carry out a thermodynamic integration. We present a strategy and an algorithm which allows to sample the thermodynamic integration path even in the case of liquids, despite the… ▽ More We propose a new method to compute the free energy or enthalpy of fluids or disordered solids by computer simulation . The main idea is to construct a reference system by freezing one representative configuration, and then carry out a thermodynamic integration. We present a strategy and an algorithm which allows to sample the thermodynamic integration path even in the case of liquids, despite the fact that the particles can diffuse freely through the system. The method is described in detail and illustrated with applications to hard sphere fluids and solids with mobile defects. △ Less

Submitted 14 March, 2011; v1 submitted 20 August, 2010; originally announced August 2010.

Comments: Conference paper for the 23rd Workshop on Computer Simulation Studies in Condensed Matter in Athens, Georgia (2010) Revision: Equation (5) corrected

Mesoscopic simulations of polyelectrolyte electrophoresis in nanochannels

Authors: Jens Smiatek, Friederike Schmid

Abstract: We present the results of mesoscopic dissipative particle dynamics (DPD) simulations of coupled electrohydrodynamic phenomena on the micro- and nanoscale. The effects of electroosmotic flow and slippage combined with polyelectrolyte electrophoresis are investigated in detail, taking full account of hydrodynamic and electrostatic interactions. Our numerical results are in excellent agreement with a… ▽ More We present the results of mesoscopic dissipative particle dynamics (DPD) simulations of coupled electrohydrodynamic phenomena on the micro- and nanoscale. The effects of electroosmotic flow and slippage combined with polyelectrolyte electrophoresis are investigated in detail, taking full account of hydrodynamic and electrostatic interactions. Our numerical results are in excellent agreement with analytical calculations. △ Less

Submitted 21 July, 2010; originally announced July 2010.

Comments: 15 pages, 6 figures

Coarse-Grained Simulations of Membranes under Tension

Authors: Jörg Neder, Beate West, Peter Nielaba, Friederike Schmid

Abstract: We investigate the properties of membranes under tension by Monte-Carlo simulations of a generic coarse-grained model for lipid bilayers. We give a comprising overview of the behavior of several membrane characteristics, such as the area per lipid, the monolayer overlap, the nematic order, and pressure profiles. Both the low-temperature regime, where the membranes are in a gel phase, and the hig… ▽ More We investigate the properties of membranes under tension by Monte-Carlo simulations of a generic coarse-grained model for lipid bilayers. We give a comprising overview of the behavior of several membrane characteristics, such as the area per lipid, the monolayer overlap, the nematic order, and pressure profiles. Both the low-temperature regime, where the membranes are in a gel phase, and the high-temperature regime, where they are in the fluid phase, are considered. In the gel state, the membrane is hardly influenced by tension. In the fluid state, high tensions lead to structural changes in the membrane, which result in different compressibility regimes. The ripple state, which is found at tension zero in the transition regime between the fluid and the gel phase, disappears under tension and gives way to an interdigitated phase. We also study the membrane fluctuations in the fluid phase. In the low tension regime the data can be fitted nicely to a suitably extended elastic theory. At higher tensions the elastic fit consistently underestimates the strength of long-wavelength fluctuations. Finally, we investigate the influence of tension on the effective interaction between simple transmembrane inclusions and show that tension can be used to tune the hydrophobic mismatch interaction between membrane proteins. △ Less

Submitted 22 February, 2010; originally announced February 2010.

Comments: 14 pages, 14 figures, accepted for publication in The Journal of Chemical Physics

Journal ref: J. Chem. Phys. 132, 115101 (2010)

Influence of correlations on molecular recognition

Authors: Hans Behringer, Friederike Schmid

Abstract: The influence of the patchiness and correlations in the distribution of hydrophobic and polar residues at the interface between two rigid biomolecules on their recognition ability is investigated in idealised coarse-grained lattice models. A general two-stage approach is utilised where an ensemble of probe molecules is designed first and the recognition ability of the probe ensemble is related t… ▽ More The influence of the patchiness and correlations in the distribution of hydrophobic and polar residues at the interface between two rigid biomolecules on their recognition ability is investigated in idealised coarse-grained lattice models. A general two-stage approach is utilised where an ensemble of probe molecules is designed first and the recognition ability of the probe ensemble is related to the free energy of association with both the target molecule and a different rival molecule in a second step. The influence of correlation effects are investigated using numerical Monte Carlo techniques and mean field methods. Correlations lead to different optimum characteristic lengths of the hydrophobic and polar patches for the mutual design of the two biomolecules on the one hand and their recognition ability in the presence of other molecules on the other hand. △ Less

Submitted 10 September, 2008; originally announced September 2008.

Comments: 15 pages, 5 figures

Journal ref: Phys. Rev. E 78, 031903 (2008)

Membrane-Protein Interactions in a Generic Coarse-Grained Model for Lipid Bilayers

Authors: Beate West, Frank L. H. Brown, Friederike Schmid

Abstract: We study membrane-protein interactions and membrane-mediated protein-protein interactions by Monte Carlo simulations of a generic coarse-grained model for lipid bilayers with cylindrical hydrophobic inclusions. The strength of the hydrophobic force and the hydrophobic thickness of the proteins are systematically varied. The results are compared with analytical predictions of two popular analytic… ▽ More We study membrane-protein interactions and membrane-mediated protein-protein interactions by Monte Carlo simulations of a generic coarse-grained model for lipid bilayers with cylindrical hydrophobic inclusions. The strength of the hydrophobic force and the hydrophobic thickness of the proteins are systematically varied. The results are compared with analytical predictions of two popular analytical theories: The Landau-de Gennes theory and the elastic theory. The elastic theory provides an excellent description of the fluctuation spectra of pure membranes and successfully reproduces the deformation profiles of membranes around single proteins. However, its prediction for the potential of mean force between proteins is not compatible with the simulation data for large distances. The simulations show that the lipid-mediated interactions are governed by five competing factors: Direct interactions, lipid-induced depletion interactions, lipid bridging, lipid packing, and a smooth long-range contribution. The mechanisms leading to "hydrophobic mismatch" interactions are critically analyzed. △ Less

Submitted 10 September, 2008; originally announced September 2008.

Comments: 16 pages, 8 figures, accepted for publication in Biophysical Journal

Coarse-grained lattice model for investigating the role of cooperativity in molecular recognition

Authors: Hans Behringer, Andreas Degenhard, Friederike Schmid

Abstract: Equilibrium aspects of molecular recognition of rigid biomolecules are investigated using coarse-grained lattice models. The analysis is carried out in two stages. First an ensemble of probe molecules is designed with respect to the target biomolecule. The recognition ability of the probe ensemble is then investigated by calculating the free energy of association. The influence of cooperative an… ▽ More Equilibrium aspects of molecular recognition of rigid biomolecules are investigated using coarse-grained lattice models. The analysis is carried out in two stages. First an ensemble of probe molecules is designed with respect to the target biomolecule. The recognition ability of the probe ensemble is then investigated by calculating the free energy of association. The influence of cooperative and anti-cooperative effects accompanying the association of the target and probe molecules is studied. Numerical findings are presented and compared to analytical results which can be obtained in the limit of dominating cooperativity and in the mean-field formulation of the models. △ Less

Submitted 7 January, 2008; originally announced January 2008.

Comments: 12 pages, 7 figures

Journal ref: Phys. Rev. E 76, 031914 (2007)

Tunable-slip boundaries for coarse-grained simulations of fluid flow

Authors: Jens Smiatek, Michael P. Allen, Friederike Schmid

Abstract: On the micro- and nanoscale, classical hydrodynamic boundary conditions such as the no-slip condition no longer apply. Instead, the flow profiles exhibit ``slip`` at the surface, which is characterized by a finite slip length (partial slip). We present a new, systematic way of implementing partial-slip boundary conditions with arbitrary slip length in coarse-grained computer simulations. The mai… ▽ More On the micro- and nanoscale, classical hydrodynamic boundary conditions such as the no-slip condition no longer apply. Instead, the flow profiles exhibit ``slip`` at the surface, which is characterized by a finite slip length (partial slip). We present a new, systematic way of implementing partial-slip boundary conditions with arbitrary slip length in coarse-grained computer simulations. The main idea is to represent the complex microscopic interface structure by a spatially varying effective viscous force. An analytical equation for the resulting slip length can be derived for planar and for curved surfaces. The comparison with computer simulations of a DPD (dissipative particle dynamics) fluid shows that this expression is valid from full-slip to no-slip. △ Less

Submitted 20 March, 2008; v1 submitted 20 December, 2007; originally announced December 2007.

Comments: submitted to Eur. Phys. J. E (accepted)

A Coarse-Grained Lattice Model for Molecular Recognition

Authors: Hans Behringer, Andreas Degenhard, Friederike Schmid

Abstract: We present a simple model which allows to investigate equilibrium aspects of molecular recognition between rigid biomolecules on a generic level. Using a two-stage approach, which consists of a design and a testing step, the role of cooperativity and of varying bond strength in molecular recognition is investigated. Cooperativity is found to enhance selectivity. In complexes which require a high… ▽ More We present a simple model which allows to investigate equilibrium aspects of molecular recognition between rigid biomolecules on a generic level. Using a two-stage approach, which consists of a design and a testing step, the role of cooperativity and of varying bond strength in molecular recognition is investigated. Cooperativity is found to enhance selectivity. In complexes which require a high binding flexibility a small number of strong bonds seems to be favored compared to a situation with many but weak bonds. △ Less

Submitted 24 August, 2006; originally announced August 2006.

Comments: 4 pages, 3 figures, to appear in Phys. Rev. Lett

Journal ref: Phys. Rev. Lett. 97, 128101 (2006)