-
Air-coupled ultrasound using broadband shock waves from piezoelectric spark igniters
Authors:
K. G. Scheuer,
R. G. DeCorby
Abstract:
We used an optomechanical sensor to study the ultrasound generated by manually operated piezoelectric spark igniters. These low-energy sparks produce short-duration acoustic shock-wave pulses, with sub-microsecond rise times and frequency content extending well beyond 2 MHz in air. The same source-receiver combination was then used to demonstrate broadband characterization of solid (polymer and gl…
▽ More
We used an optomechanical sensor to study the ultrasound generated by manually operated piezoelectric spark igniters. These low-energy sparks produce short-duration acoustic shock-wave pulses, with sub-microsecond rise times and frequency content extending well beyond 2 MHz in air. The same source-receiver combination was then used to demonstrate broadband characterization of solid (polymer and glass) plates in a simple setup, where single spark events yielded high-SNR data without the need for critical alignment. This setup also enabled us to estimate pressure excursions approaching 105 Pa at millimeter-scale distances from the spark. The results are in large part made possible by the small size, wide bandwidth, and high sensitivity of the optomechanical sensor, and might be of interest for air-coupled ultrasound applications in non-destructive testing.
△ Less
Submitted 13 March, 2024;
originally announced March 2024.
-
Coupling the thermal acoustic modes of a bubble to an optomechanical sensor
Authors:
K. G. Scheuer,
F. B. Romero,
R. G. DeCorby
Abstract:
We report experimental observations of the volume acoustic modes of air bubbles in water, including both the fundamental Minnaert breathing mode and a family of higher-order modes extending into the megahertz frequency range. Bubbles were placed on or near optomechanical sensors having a noise floor substantially determined by ambient medium fluctuations, and which are thus able to detect thermal…
▽ More
We report experimental observations of the volume acoustic modes of air bubbles in water, including both the fundamental Minnaert breathing mode and a family of higher-order modes extending into the megahertz frequency range. Bubbles were placed on or near optomechanical sensors having a noise floor substantially determined by ambient medium fluctuations, and which are thus able to detect thermal motions of proximate objects. Bubble motions could be coupled to the sensor through both air (i.e., with the sensor inside the bubble) and water, verifying that sound is radiated by the high-order modes. We also present evidence for elastic-Purcell-effect modifications of the sensor's vibrational spectrum when encapsulated by a bubble, in the form of cavity-modified linewidths and line shifts.
△ Less
Submitted 1 May, 2024; v1 submitted 3 August, 2023;
originally announced August 2023.
-
Ultrasonic spectroscopy of sessile droplets coupled to optomechanical sensors
Authors:
Kyle G. Scheuer,
Franz B. Romero,
Graham J. Hornig,
Ray G. DeCorby
Abstract:
We describe a system for interrogating the acoustic properties of sub-nanoliter liquid samples within an open microfluidics platform. Sessile droplets were deposited onto integrated optomechanical sensors, which possess ambient-medium-noise-limited sensitivity and can thus passively sense the thermally driven acoustic spectrum of the droplets. The droplet acoustic breathing modes manifest as reson…
▽ More
We describe a system for interrogating the acoustic properties of sub-nanoliter liquid samples within an open microfluidics platform. Sessile droplets were deposited onto integrated optomechanical sensors, which possess ambient-medium-noise-limited sensitivity and can thus passively sense the thermally driven acoustic spectrum of the droplets. The droplet acoustic breathing modes manifest as resonant features in the thermomechanical noise spectrum of the sensor, in some cases hybridized with the sensor's own vibrational modes. Excellent agreement is found between experimental observations and theoretical predictions, over the entire ~ 0 - 40 MHz operating range of our sensors. With suitable control over droplet size and morphology, this technique has the potential for precision acoustic sensing of small-volume biological and chemical samples.
△ Less
Submitted 13 July, 2023;
originally announced July 2023.
-
Observation of thermal acoustic modes of a droplet coupled to an optomechanical sensor
Authors:
Graham J. Hornig,
Kyle G. Scheuer,
Ray G. DeCorby
Abstract:
The bulk acoustic modes of liquid droplets, well understood from a theoretical perspective, have rarely been observed experimentally. Here, we report the direct observation of acoustic vibrational modes in a picoliter-scale droplet, extending up to ~ 40 MHz. This was achieved by coupling the droplet to an ultra-sensitive optomechanical sensor, which operates in a thermal-noise limited regime and w…
▽ More
The bulk acoustic modes of liquid droplets, well understood from a theoretical perspective, have rarely been observed experimentally. Here, we report the direct observation of acoustic vibrational modes in a picoliter-scale droplet, extending up to ~ 40 MHz. This was achieved by coupling the droplet to an ultra-sensitive optomechanical sensor, which operates in a thermal-noise limited regime and with a substantial contribution from acoustic noise in the ambient medium. The droplet vibrational modes manifest as Fano resonances in the thermal noise spectrum of the sensor. This is amongst the few reported observations of droplet acoustic modes, and of Fano interactions in a coupled mechanical oscillator system driven only by thermal Brownian motion.
△ Less
Submitted 8 May, 2023;
originally announced May 2023.
-
Accounting for objective lens autofluorescence in quantum emitter measurements
Authors:
K. G. Scheuer,
G. J. Hornig,
T. R. Harrison,
R. G. DeCorby
Abstract:
The rise of interest in the study of quantum emitters has recently prompted many research groups to construct their own confocal epifluorescence microscopy/spectroscopy instruments. The low light levels typically involved in quantum emitter measurements makes it critically important to account for any potential sources of background fluorescence by components used within such setups. In this repor…
▽ More
The rise of interest in the study of quantum emitters has recently prompted many research groups to construct their own confocal epifluorescence microscopy/spectroscopy instruments. The low light levels typically involved in quantum emitter measurements makes it critically important to account for any potential sources of background fluorescence by components used within such setups. In this report, we show that emission originating from various microscope objectives can possess elusive sharp linewidths that could potentially be mistaken for quantum emission. Impurities present in many glasses overlap in wavelength with single photon emission from several candidate emitter systems of current interest. A careful consideration of this system noise could be critical to exploratory work of the optical properties of materials such as transition metal dichalcogenides and hexagonal boron nitride.
△ Less
Submitted 21 June, 2022;
originally announced June 2022.
-
Ultrasound sensing at thermomechanical limits with optomechanical buckled-dome microcavities
Authors:
G. J. Hornig,
K. G. Scheuer,
E. B. Dew,
R. Zemp,
R. G. DeCorby
Abstract:
We describe the use of monolithic, buckled-dome cavities as ultrasound sensors. Patterned delamination within a compressively stressed thin film stack produces high-finesse plano-concave optical resonators with sealed and empty cavity regions. The buckled mirror also functions as a flexible membrane, highly responsive to changes in external pressure. Owing to their efficient opto-acousto-mechanica…
▽ More
We describe the use of monolithic, buckled-dome cavities as ultrasound sensors. Patterned delamination within a compressively stressed thin film stack produces high-finesse plano-concave optical resonators with sealed and empty cavity regions. The buckled mirror also functions as a flexible membrane, highly responsive to changes in external pressure. Owing to their efficient opto-acousto-mechanical coupling, thermal-displacement-noise limited sensitivity is achieved at low optical interrogation powers and for modest optical (Q ~ 10^3) and mechanical (Q ~ 10^2) quality factors. We predict and verify broadband (up to ~ 5 MHz), air-coupled ultrasound detection with noise-equivalent pressure (NEP) as low as ~ 30-100 $μ$Pa/Hz^1/2. This corresponds to an ultrasonic force sensitivity ~ 2 x 10^-13 N/Hz^1/2 and enables the detection of MHz-range signals propagated over distances as large as ~ 20 cm in air. In water, thermal-noise-limited sensitivity is demonstrated over a wide frequency range (up to ~ 30 MHz), with NEP as low as ~ 100-800 $μ$Pa/Hz^1/2. These cavities exhibit a nearly omnidirectional response, while being ~ 3-4 orders of magnitude more sensitive than piezoelectric devices of similar size. Easily realized as large arrays and naturally suited to direct coupling by free-space beams or optical fibers, they offer significant practical advantages over competing optical devices, and thus could be of interest for several emerging applications in medical and industrial ultrasound imaging.
△ Less
Submitted 13 June, 2022;
originally announced June 2022.
