-
Electron and gas temperature-driven chemistry during microdischarges formed in water vapour bubbles
Authors:
Florens Grimm,
Jan-Luca Gembus,
Jana Schöne,
Peter Awakowicz,
Lars Schücke,
Andrew R. Gibson
Abstract:
Microdischarges formed in bubbles immersed in liquids are of interest for materials synthesis and chemical conversion applications in the frame of plasma-driven electrochemistry. A key challenge associated with controlling such processes is the limited understanding of the gas-phase chemical kinetics in these microdischarges. Due to their large electron densities, and high gas temperatures, both e…
▽ More
Microdischarges formed in bubbles immersed in liquids are of interest for materials synthesis and chemical conversion applications in the frame of plasma-driven electrochemistry. A key challenge associated with controlling such processes is the limited understanding of the gas-phase chemical kinetics in these microdischarges. Due to their large electron densities, and high gas temperatures, both electron and gas temperature driven chemistry are likely to be important. Here, a 0-D modelling approach, informed by experimental measurements, is used to study the chemical kinetics in these systems. A new reaction scheme is developed for microdischarges in water vapour, including reactions for both high electron density, and high gas temperature regimes. Microdischarges formed during plasma electrolytic oxidation are used as a test case, however, the key results are expected to be transferable to other plasma electrolysis systems with similar properties. Experimentally measured power densities are used as input to the 0-D model, together with estimates of temperatures and gas pressures within the gas bubble. Comparison of measured and simulated electron densities shows good agreement, given the limitations of both model and experiment. In the base case microdischarge, H$_{2}$O is found to be highly dissociated during the period of peak power density, with H and O making up the majority of the neutral gas in the bubble. The maximum ionization degree is around 0.31$\,\%$, and the electronegativity during the period of peak electron density is found to be low. Species formation and reaction pathways are analysed under variation of the neutral gas temperature from 2000$\,$K to 6000$\,$K. At all temperatures, electron, ion, and neutral reactions with high threshold energies are found to be important for the overall chemical kinetics.
△ Less
Submitted 5 June, 2025;
originally announced June 2025.
-
Concentration profiles of OH and H$_2$O$_2$ in plasma-treated water: influence of power, gas mixture and treatment distance
Authors:
Anna Lena Schöne,
Steffen Schüttler,
Talisha Mroß,
Niklas Eichstaedt,
Judith Golda,
Lars Schücke,
Andrew R. Gibson
Abstract:
Plasma liquid interactions are important for a range of applications. For these, H$_2$O$_2$ and OH represent two key reactive species, whose concentrations in liquids need to be controlled for effective application outcomes. Here, a combination of gas and liquid simulations is used to study the concentration profiles of H$_2$O$_2$ and OH in water treated by a radio-frequency-driven plasma jet, wit…
▽ More
Plasma liquid interactions are important for a range of applications. For these, H$_2$O$_2$ and OH represent two key reactive species, whose concentrations in liquids need to be controlled for effective application outcomes. Here, a combination of gas and liquid simulations is used to study the concentration profiles of H$_2$O$_2$ and OH in water treated by a radio-frequency-driven plasma jet, with a glass capillary between the electrodes, operated in He with admixtures of water vapour. Simulations are compared with measured H$_2$O$_2$ concentrations and found to be in good qualitative agreement as plasma power and water admixture are varied. Simulation results show that the concentration profiles of H$_2$O$_2$ in the liquid are mainly determined by transport, while those of OH are limited by reactions with H$_2$O$_2$, which consumes OH. For a given plasma operating condition, the concentration and penetration depth of H$_2$O$_2$ increase with plasma treatment time, while those of OH tend to decrease because of the increasing H$_2$O$_2$ concentration. Plasma power, water vapour admixture, and the distance between the jet and the liquid surface all allow for the concentrations of H$_2$O$_2$ and OH to be controlled. The OH delivered from the gas phase to the liquid, and its concentration within the liquid are strongly dependent on the reaction pathways occurring in the effluent region, such that the trends in OH density at the end of the plasma region differ from those in the liquid. While the concentration of OH in the liquid is always much lower than that of H$_2$O$_2$, the ratio of the two species can be controlled over orders of magnitude by varying water admixture and power. The highest selectivity to OH is at low water admixtures, low powers and short treatment times, while the highest selectivity to H$_2$O$_2$ is at high water admixtures, high powers and long treatment times.
△ Less
Submitted 4 June, 2025;
originally announced June 2025.
-
Dynamics of reactive oxygen species produced by the COST microplasma jet
Authors:
Sascha Chur,
Robin Minke,
Youfan He,
Máté Vass,
Thomas Mussenbrock,
Ralf Peter Brinkmann,
Efe Kemaneci,
Lars Schücke,
Volker Schulz-von der Gathen,
Andrew R. Gibson,
Marc Böke,
Judith Golda
Abstract:
This study is focused on measuring the densities of the excited molecular oxygen species, O$_{2}(\text{a}^{1}Δ_{\text{g}})$ and O$_{2}(\text{b}^{1}Σ_{\text{g}}^{+})$, produced in a COST atmospheric pressure plasma jet using a helium-oxygen mixture. Knowledge of the ozone density is critical for measurements because of its high quenching rate of these species. Additionally O…
▽ More
This study is focused on measuring the densities of the excited molecular oxygen species, O$_{2}(\text{a}^{1}Δ_{\text{g}})$ and O$_{2}(\text{b}^{1}Σ_{\text{g}}^{+})$, produced in a COST atmospheric pressure plasma jet using a helium-oxygen mixture. Knowledge of the ozone density is critical for measurements because of its high quenching rate of these species. Additionally O$_{2}(\text{a}^{1}Δ_{\text{g}})$ is difficult to measure, due to its low emission intensity and sensitivity to background interference in the plasma region. Therefore a flow cell was used to enhance signal detection in the effluent region. To validate the measurements and improve understanding of reaction mechanisms, results were compared with two simulation models: a pseudo-1D plug flow simulation and a 2D fluid simulation. The plug flow simulation provided an effective means for estimating species densities, with a fast computation time. The 2D simulation offered a more realistic description of the flow dynamics, which proved critical to correctly describe the experimental trends. However, it requires long computation times to reach an equilibrium state in the flow cell. Otherwise, it leads to discrepancies to the experimental data. Further discrepancies arose, from an overestimation of the ozone density from the models, as validated from the O$_{2}(\text{b}^{1}Σ_{\text{g}}^{+})$ density measurements. Optimizing the reaction rate coefficients for the effluent region might improve the agreement with the experimental results. Despite these limitations both simulations aligned reasonably well with experimental data, showcasing the well validated plasma chemistry of the models, even for complicated effluent geometries.
△ Less
Submitted 15 May, 2025;
originally announced May 2025.
-
Characterisation of single microdischarges during plasma electrolytic oxidation of aluminium and titanium
Authors:
Jan-Luca Gembus,
Vera Bracht,
Florens Grimm,
Nikita Bibinov,
Lars Schücke,
Peter Awakowicz,
Andrew R. Gibson
Abstract:
Plasma electrolytic oxidation (PEO) is a technique used to create oxide-ceramic coatings on lightweight metals, such as aluminium, magnesium, and titanium. PEO is known for producing coatings with high corrosion resistance and strong adhesion to the substrate. The process involves generating short-lived microdischarges on the material surface through anodic dielectric breakdown in a conductive aqu…
▽ More
Plasma electrolytic oxidation (PEO) is a technique used to create oxide-ceramic coatings on lightweight metals, such as aluminium, magnesium, and titanium. PEO is known for producing coatings with high corrosion resistance and strong adhesion to the substrate. The process involves generating short-lived microdischarges on the material surface through anodic dielectric breakdown in a conductive aqueous solution. To investigate single microdischarges during PEO, a single microdischarge setup was developed, where the active anode surface is reduced to the tip of a wire with a diameter of 1 mm. In this work the focus is on the effect of electrolyte concentration, anode material, and electrical parameters on the microdischarges. The electrolyte is composed of distilled water with varying concentrations of potassium hydroxide (0.5 - 4 g/l). High-speed optical measurements are conducted to gain insights into the formation and temporal evolution of individual microdischarges and the induced gas bubble formation. Optical emission spectroscopy is used to estimate surface and electron temperatures by fitting Bremsstrahlung and Planck's law to the continuum spectrum of the microdischarges. To evaluate the impact of the microdischarges on coating morphology, the resulting oxide layers on the metal tips are analysed using scanning electron microscopy. The study demonstrates that microdischarge behaviour is significantly influenced by the substrate material, treatment time, and electrolyte concentration, all of which impact the coating morphology. Under the conditions studied in this work, aluminium exhibits longer microdischarge and bubble lifetimes, with fewer cracks on the top layer of the coating, whereas titanium showed faster, shorter-lived bubbles due to more rapid microdischarge events.
△ Less
Submitted 16 April, 2025;
originally announced April 2025.
-
Influence of gas flow rate on modes of reactive oxygen and nitrogen species in a grid-type surface dielectric barrier discharge
Authors:
Angie Natalia Torres Segura,
Kazumasa Ikuse,
Satoshi Hamaguchi,
Andrew R. Gibson,
Lars Schücke
Abstract:
The presented work investigates a surface dielectric barrier discharge (SDBD) operated dry synthetic air as the working gas using a combination of experimental measurements and simulations. The primary objective is to characterize the production and consumption dynamics of reactive oxygen and nitrogen species to enhance the understanding of their formation and facilitate control of the discharge f…
▽ More
The presented work investigates a surface dielectric barrier discharge (SDBD) operated dry synthetic air as the working gas using a combination of experimental measurements and simulations. The primary objective is to characterize the production and consumption dynamics of reactive oxygen and nitrogen species to enhance the understanding of their formation and facilitate control of the discharge for applications. Densities of O3, NO2, and N2O5 are measured under varying gas flow rates, utilizing optical absorption spectroscopy as the diagnostic method. A semi-empirical chemical kinetics model is developed based on a compilation of reactions from previous studies on similar types of discharges. The results reveal two previously known and distinct operating modes, with a mode transition occurring between the modes as the flow rate is varied. The results indicate the dependency of the mode transition on the density of sufficiently vibrationally excited nitrogen molecules, which is represented in the model by an increased vibrational temperature at lower gas flow rates. Furthermore, key reactions responsible for the production and consumption of ozone and nitrogen oxides are identified, providing insight into the importance of macroscopic parameters, such as gas temperatures and different time constants, that influence the nonlinear balance of these reactions.
△ Less
Submitted 7 February, 2025;
originally announced February 2025.
-
Decoupling NO production and UV emission intensity over the E-H mode transition in a low-pressure inductively coupled plasma device
Authors:
Lars Schücke,
Angie Natalia Torres Segura,
Ihor Korolov,
Peter Awakowicz,
Andrew R. Gibson
Abstract:
A low-pressure double-inductively coupled plasma device is used to study the fundamental plasma parameters, plasma chemistry, and UV photon emission from the first excited state of nitric oxide, NO(A), in gas mixtures of nitrogen and oxygen. In addition to the gas mixture, rf power and gas pressure are varied, and the E-H mode transition of the inductively coupled plasma is studied specifically. T…
▽ More
A low-pressure double-inductively coupled plasma device is used to study the fundamental plasma parameters, plasma chemistry, and UV photon emission from the first excited state of nitric oxide, NO(A), in gas mixtures of nitrogen and oxygen. In addition to the gas mixture, rf power and gas pressure are varied, and the E-H mode transition of the inductively coupled plasma is studied specifically. The gas temperature and UV photon emission are measured by optical emission spectroscopy (OES), the absolute density of the nitric oxide electronic ground state by laser-induced fluorescence (LIF), as well as electron density and electron temperature by a multipole resonance probe (MRP). A simple collisional-radiative model for UV emission from NO(A) is developed, which takes the measured densities of ground state nitric oxide and electrons, as well as the electron temperature and neutral gas temperature, as input parameters. The results reveal the links between the absolute densities of ground state nitric oxide, the excitation of this species driven by electron impact and collisions with nitrogen metastables, quenching of the nitrogen metastables, and the resulting UV photon emission rate. The density of ground state nitric oxide is shown to increase with power, while the discharge remains in E-mode, and to decrease significantly with the transition into H-mode, when sufficient rf power is deposited in the discharge. Despite the lower densities of ground state nitric oxide in H-mode, the UV photon emission intensity increases continuously with higher rf powers and over the E-H transition. This effect is shown to be caused by increased excitation of NO(A) by nitrogen metastables in H-mode, which is sufficient to overcompensate the decrease in ground state nitric oxide density.
△ Less
Submitted 5 July, 2024;
originally announced July 2024.
-
Interactions between flow fields induced by surface dielectric barrier discharge arrays
Authors:
Alexander Böddecker,
Maximilian Passmann,
Sebastian Wilczek,
Lars Schücke,
Ihor Korolov,
Romuald Skoda,
Thomas Mussenbrock,
Andrew R. Gibson,
Peter Awakowicz
Abstract:
This study investigates the flow field induced by a surface dielectric barrier discharge (SDBD) system, known for its efficient pollution remediation of volatile organic compounds (VOCs). We aim to understand the flow dynamics that contribute to the high conversion observed in similar systems. Experimental techniques, including schlieren imaging and particle image velocimetry (PIV), applied with h…
▽ More
This study investigates the flow field induced by a surface dielectric barrier discharge (SDBD) system, known for its efficient pollution remediation of volatile organic compounds (VOCs). We aim to understand the flow dynamics that contribute to the high conversion observed in similar systems. Experimental techniques, including schlieren imaging and particle image velocimetry (PIV), applied with high temporal resolution, were used to analyse the flow field. Complementary, fluid simulations are employed to investigate the coupling between streamer and gas dynamics. Results show distinct fluid field behaviours for different electrode configurations, which differ in geometric complexity. The fluid field analysis of the most basic electrode design revealed behaviours commonly observed in actuator studies. The simulation results indicate the local information about the electron density as well as different temporal phases of the fluid flow. The electrode design with mostly parallel grid line structures exhibits confined vortices near the surface. In contrast, an electrode design also used in previous studies, is shown to promote strong gas transport through extended vortex structures, enhancing gas mixing and potentially explaining the high conversion observed.
△ Less
Submitted 28 July, 2023;
originally announced July 2023.
