-
Growth rate and energy dissipation in wind-forced breaking waves
Authors:
Nicolò Scapin,
Jiarong Wu,
J. Thomas Farrar,
Bertrand Chapron,
Stéphane Popinet,
Luc Deike
Abstract:
We investigate the energy growth and dissipation of wind-forced breaking waves using direct numerical simulations of the coupled air-water Navier-Stokes equations. We vary the wind friction velocity over the wave speed $u_\ast/c$ up to 1. A turbulent wind boundary layer drives the growth of a pre-existing narrowband wave field until it breaks and transfers energy into the water column. Under susta…
▽ More
We investigate the energy growth and dissipation of wind-forced breaking waves using direct numerical simulations of the coupled air-water Navier-Stokes equations. We vary the wind friction velocity over the wave speed $u_\ast/c$ up to 1. A turbulent wind boundary layer drives the growth of a pre-existing narrowband wave field until it breaks and transfers energy into the water column. Under sustained wind forcing, the wave field then resumes growth. We separately analyze energy transfers during wave growth and breaking-induced dissipation. Energy transfers are dominated by pressure input during growth and turbulent dissipation during breaking. The wave growth rate scales with $(u_\ast/c)^2$, modulated by the wave steepness due to sheltering. The energy dissipation follows the inertial scaling with wave slope at breaking, confirming the universality of the process. Following breaking, near-surface vertical turbulence dissipation profiles scale as $z^{-1}$, with its magnitude controlled by the breaking-induced dissipation.
△ Less
Submitted 21 June, 2025;
originally announced June 2025.
-
Evaporation of Finite-Size Ammonia and n-Heptane Droplets in Weakly Compressible Turbulence: An Interface-Resolved DNS Study
Authors:
Salar Zamani Salimi,
Andrea Gruber,
Nicolò Scapin,
Luca Brandt
Abstract:
This study presents direct numerical simulation (DNS) of finite-size, interface-resolved ammonia and n-heptane droplets evaporating in decaying homogeneous isotropic turbulence. Simulations are conducted for each fuel to model the dynamics in a dense spray region, where the liquid volume fraction exceeds $\mathcal{O}(10^{-2})$. The focus is on investigating the complex interactions between droplet…
▽ More
This study presents direct numerical simulation (DNS) of finite-size, interface-resolved ammonia and n-heptane droplets evaporating in decaying homogeneous isotropic turbulence. Simulations are conducted for each fuel to model the dynamics in a dense spray region, where the liquid volume fraction exceeds $\mathcal{O}(10^{-2})$. The focus is on investigating the complex interactions between droplets, turbulence, and phase change, with emphasis on droplet-droplet interactions and their influence on the evaporation process. The present study also explores how varying turbulence intensities affect the evaporation rates of each fuel, unveiling the differences in the coalescence and energy transfer from the liquid to the gaseous phase. The results reveal that, when comparing ammonia with n-heptane with equal liquid volume fractions, ammonia exhibits faster initial evaporation due to its higher volatility. However, this rate declines over time as frequent droplet coalescence reduces the total surface area available for evaporation. When numerical experiments are initialized with equal energy content, increasing turbulence intensity enhances the evaporation of n-heptane throughout the simulation, while ammonia evaporation soon becomes less sensitive to turbulence due to rapid vapor saturation. These findings are relevant to improving predictive CFD models and optimizing fuel injection in spray-combustion applications, especially under high-pressure conditions.
△ Less
Submitted 29 May, 2025; v1 submitted 23 April, 2025;
originally announced April 2025.
-
Momentum fluxes in wind-forced breaking waves
Authors:
Nicolò Scapin,
Jiarong Wu,
J. Thomas Farrar,
Bertrand Chapron,
Stéphane Popinet,
Luc Deike
Abstract:
We investigate the momentum fluxes between a turbulent air boundary layer and a growing-breaking wave field by solving the air-water two-phase Navier-Stokes equations through direct numerical simulations (DNS). A fully-developed turbulent airflow drives the growth of a narrowbanded wave field, whose amplitude increases until reaching breaking conditions. The breaking events result in a loss of wav…
▽ More
We investigate the momentum fluxes between a turbulent air boundary layer and a growing-breaking wave field by solving the air-water two-phase Navier-Stokes equations through direct numerical simulations (DNS). A fully-developed turbulent airflow drives the growth of a narrowbanded wave field, whose amplitude increases until reaching breaking conditions. The breaking events result in a loss of wave energy, transferred to the water column, followed by renewed growth under wind forcing. We revisit the momentum flux analysis in a high-wind speed regime, characterized by the ratio of the friction velocity to wave speed $u_\ast/c$ in the range $[0.3-0.9]$, through the lens of growing-breaking cycles. The total momentum flux across the interface is dominated by pressure, which increases with $u_\ast/c$ during growth and reduces sharply during breaking. Drag reduction during breaking is linked to airflow separation, a sudden acceleration of the flow, an upward shift of the mean streamwise velocity profile, and a reduction in Reynolds shear stress. We characterize the reduction of pressure stress and flow acceleration through an aerodynamic drag coefficient by splitting the analysis between growing and breaking stages, treating them as separate sub-processes. While drag increases with $u_\ast/c$ during growth, it drops during breaking. Averaging over both stages leads to a saturation of the drag coefficient at high $u_\ast/c$, comparable to what is observed at high wind speeds in laboratory and field conditions. Our analysis suggests this saturation is controlled by breaking dynamics.
△ Less
Submitted 27 December, 2024; v1 submitted 5 November, 2024;
originally announced November 2024.
-
Turbulent convection in emulsions: the Rayleigh-Bénard configuration
Authors:
Abbas Moradi Bilondi,
Nicolò Scapin,
Luca Brandt,
Parisa Mirbod
Abstract:
This study explores heat and turbulent modulation in three-dimensional multiphase Rayleigh-Bénard convection using direct numerical simulations. Two immiscible fluids with identical reference density undergo systematic variations in dispersed-phase volume fractions, $0.0 \leq \Upphi \leq 0.5$, and ratios of dynamic viscosity, $λ_μ$, and thermal diffusivity, $λ_α$, within the range $[0.1-10]$. The…
▽ More
This study explores heat and turbulent modulation in three-dimensional multiphase Rayleigh-Bénard convection using direct numerical simulations. Two immiscible fluids with identical reference density undergo systematic variations in dispersed-phase volume fractions, $0.0 \leq \Upphi \leq 0.5$, and ratios of dynamic viscosity, $λ_μ$, and thermal diffusivity, $λ_α$, within the range $[0.1-10]$. The Rayleigh, Prandtl, Weber, and Froude numbers are held constant at $10^8$, $4$, $6000$, and $1$, respectively. Initially, when both fluids share the same properties, a 10\% Nusselt number increase is observed at the highest volume fractions. In this case, despite a reduction in turbulent kinetic energy, droplets enhance energy transfer to smaller scales, smaller than those of single-phase flow, promoting local mixing. By varying viscosity ratios, while maintaining a constant Rayleigh number based on the average mixture properties, the global heat transfer rises by approximately 25\% at $\Upphi=0.2$ and $λ_μ=10$. This is attributed to increased small-scale mixing and turbulence in the less viscous carrier phase. In addition, a dispersed phase with higher thermal diffusivity results in a 50\% reduction in the Nusselt number compared to the single-phase counterpart, owing to faster heat conduction and reduced droplet presence near walls. The study also addresses droplet-size distributions, confirming two distinct ranges dominated by coalescence and breakup with different scaling laws.
△ Less
Submitted 23 August, 2024;
originally announced August 2024.
-
Evaporating Rayleigh-Bénard convection: prediction of interface temperature and global heat transfer modulation
Authors:
Nicoló Scapin,
Andreas D. Demou,
Luca Brandt
Abstract:
We propose an analytical model to estimate the interface temperature $Θ_Γ$ and the Nusselt number $Nu$ for an evaporating two-layer Rayleigh-Bénard configuration in statistically stationary conditions. The model is based on three assumptions: (i) the Oberbeck-Boussinesq approximation can be applied to the liquid phase, while the gas thermophysical properties are generic functions of thermodynamic…
▽ More
We propose an analytical model to estimate the interface temperature $Θ_Γ$ and the Nusselt number $Nu$ for an evaporating two-layer Rayleigh-Bénard configuration in statistically stationary conditions. The model is based on three assumptions: (i) the Oberbeck-Boussinesq approximation can be applied to the liquid phase, while the gas thermophysical properties are generic functions of thermodynamic pressure, local temperature, and vapour composition, (ii) the Grossmann-Lohse theory for thermal convection can be applied to the liquid and gas layers separately, (iii) the vapour content in the gas can be taken as the mean value at the gas-liquid interface. We validate this setting using direct numerical simulations (DNS) in a parameter space composed of the Rayleigh number ($10^6\leq Ra\leq 10^8$) and the temperature differential ($0.05\leq\varepsilon\leq 0.20$), which modulates the variation of state variables in the gas layer. To better disentangle the variable property effects on $Θ_Γ$ and $Nu$, simulations are performed in two conditions. First, we consider the case of uniform gas properties except for the gas density and gas-liquid diffusion coefficient. Second, we include the variation of specific heat capacity, dynamic viscosity, and thermal conductivity using realistic equations of state. Irrespective of the employed setting, the proposed model agrees very well with the numerical simulations over the entire range of $Ra-\varepsilon$ investigated.
△ Less
Submitted 28 November, 2022; v1 submitted 5 May, 2022;
originally announced May 2022.
-
FluTAS: A GPU-accelerated finite difference code for multiphase flows
Authors:
Marco Crialesi-Esposito,
Nicolo Scapin,
Andreas D. Demou,
Marco Edoardo Rosti,
Pedro Costa,
Filippo Spiga,
Luca Brandt
Abstract:
We present the Fluid Transport Accelerated Solver, FluTAS, a scalable GPU code for multiphase flows with thermal effects. The code solves the incompressible Navier-Stokes equation for two-fluid systems, with a direct FFT-based Poisson solver for the pressure equation. The interface between the two fluids is represented with the Volume of Fluid (VoF) method, which is mass conserving and well suited…
▽ More
We present the Fluid Transport Accelerated Solver, FluTAS, a scalable GPU code for multiphase flows with thermal effects. The code solves the incompressible Navier-Stokes equation for two-fluid systems, with a direct FFT-based Poisson solver for the pressure equation. The interface between the two fluids is represented with the Volume of Fluid (VoF) method, which is mass conserving and well suited for complex flows thanks to its capacity of handling topological changes. The energy equation is explicitly solved and coupled with the momentum equation through the Boussinesq approximation. The code is conceived in a modular fashion so that different numerical methods can be used independently, the existing routines can be modified, and new ones can be included in a straightforward and sustainable manner. FluTAS is written in modern Fortran and parallelized using hybrid MPI/OpenMP in the CPU-only version and accelerated with OpenACC directives in the GPU implementation. We present different benchmarks to validate the code, and two large-scale simulations of fundamental interest in turbulent multiphase flows: isothermal emulsions in HIT and two-layer Rayleigh-Bénard convection. FluTAS is distributed through a MIT license and arises from a collaborative effort of several scientists, aiming to become a flexible tool to study complex multiphase flows.
△ Less
Submitted 19 April, 2022;
originally announced April 2022.
-
Finite-size evaporating droplets in weakly compressible homogeneous shear turbulence
Authors:
Nicolò Scapin,
Federico Dalla Barba,
Giandomenico Lupo,
Marco Edoardo Rosti,
Christophe Duwig,
Luca Brandt
Abstract:
We perform interface-resolved simulations of finite-size evaporating droplets in weakly-compressible homogeneous shear turbulence (HST). The study is conducted by varying three dimensionless physical parameters: the initial gas temperature over the critical temperature $T_{g,0}/T_c$, the initial droplet diameter over the Kolmogorov scale $d_0/η$ and the surface tension, i.e. the shear-based Weber…
▽ More
We perform interface-resolved simulations of finite-size evaporating droplets in weakly-compressible homogeneous shear turbulence (HST). The study is conducted by varying three dimensionless physical parameters: the initial gas temperature over the critical temperature $T_{g,0}/T_c$, the initial droplet diameter over the Kolmogorov scale $d_0/η$ and the surface tension, i.e. the shear-based Weber number, $We_{\mathcal{S}}$. For the smallest $We_{\mathcal{S}}$, we first discuss the impact on the evaporation rate of the three thermodynamic models employed to evaluate the gas thermophysical properties: a constant property model and two variable-properties approaches where either the gas density or all the gas properties are allowed to vary. Taking this last approach as reference, the model assuming constant gas properties and evaluated with the "1/3" rule, is shown to predict the evaporation rate better than the model where the only variable property is the gas density. Moreover, we observe that the well-known Frössling/Ranz-Marshall correlation underpredicts the Sherwood number at low temperatures, $T_{g,0}/T_c=0.75$. Next, we show that the ratio between the actual evaporation rate in turbulence and the one computed in stagnant condition is always much higher than one for weakly deformable droplets: it decreases with $T_{g,0}/T_c$ without approaching unity at the highest $T_{g,0}/T_c$ considered. This suggests an evaporation enhancement due to turbulence also in conditions typical of combustion applications. Finally, we examine the overall evaporation rate and the local interfacial mass-flux at higher $We_{\mathcal{S}}$, showing a positive correlation between evaporation rate and interfacial curvature, especially at the lowest $T_{g,0}/T_c$.
△ Less
Submitted 9 February, 2022; v1 submitted 20 April, 2021;
originally announced April 2021.
-
A pressure-based diffuse interface method for low-Mach multiphase flows with mass transfer
Authors:
Andreas D. Demou,
Nicoló Scapin,
Marica Pelanti,
Luca Brandt
Abstract:
This study presents a novel pressure-based methodology for the efficient numerical solution of a four-equation two-phase diffuse interface model. The proposed methodology has the potential to simulate low-Mach flows with mass transfer. In contrast to the classical conservative four-equation model formulation, the adopted set of equations features volume fraction, temperature, velocity and pressure…
▽ More
This study presents a novel pressure-based methodology for the efficient numerical solution of a four-equation two-phase diffuse interface model. The proposed methodology has the potential to simulate low-Mach flows with mass transfer. In contrast to the classical conservative four-equation model formulation, the adopted set of equations features volume fraction, temperature, velocity and pressure as the primary variables. The model includes the effects of viscosity, surface tension, thermal conductivity and gravity, and has the ability to incorporate complex equations of state. Additionally, a Gibbs free energy relaxation procedure is used to model mass transfer. A key characteristic of the proposed methodology is the use of high performance and scalable solvers for the solution of the Helmholtz equation for the pressure, which drastically reduces the computational cost compared to analogous density-based approaches. We demonstrate the capabilities of the methodology to simulate flows with large density and viscosity ratios through extended verification against a range of different test cases. Finally, the potential of the methodology to tackle challenging phase change flows is demonstrated with the simulation of three-dimensional nucleate boiling.
△ Less
Submitted 11 October, 2021; v1 submitted 2 April, 2021;
originally announced April 2021.
-
An interface capturing method for liquid-gas flows at low-Mach number
Authors:
Federico Dalla Barba,
Nicolò Scapin,
Marco E. Rosti,
Francesco Picano,
Luca Brandt
Abstract:
Multiphase, compressible and viscous flows are of crucial importance in a wide range of scientific and engineering problems. Despite the large effort paid in the last decades to develop accurate and efficient numerical techniques to address this kind of problems, current models need to be further improved to address realistic applications. In this context, we propose a numerical approach to the si…
▽ More
Multiphase, compressible and viscous flows are of crucial importance in a wide range of scientific and engineering problems. Despite the large effort paid in the last decades to develop accurate and efficient numerical techniques to address this kind of problems, current models need to be further improved to address realistic applications. In this context, we propose a numerical approach to the simulation of multiphase, viscous flows where a compressible and an incompressible phase interact in the low-Mach number regime. In this frame, acoustics is neglected but large density variations of the compressible phase can be accounted for as well as heat transfer, convection and diffusion processes. The problem is addressed in a fully Eulerian framework exploiting a low-Mach number asymptotic expansion of the Navier-Stokes equations. A Volume of Fluid approach (VOF) is used to capture the liquid-gas interface, built on top of a massive parallel solver, second order accurate both in time and space. The second-order-pressure term is treated implicitly and the resulting pressure equation is solved with the eigenexpansion method employing a robust and novel formulation. We provide a detailed and complete description of the theoretical approach together with information about the numerical technique and implementation details. Results of benchmarking tests are provided for five different test cases.
△ Less
Submitted 24 May, 2020;
originally announced May 2020.
-
A volume-of-fluid method for interface-resolved simulations of phase-changing two-fluid flows
Authors:
Nicolò Scapin,
Pedro Costa,
Luca Brandt
Abstract:
We present a numerical method for interface-resolved simulations of evaporating two-fluid flows based on the volume-of-fluid (VoF) method. The method has been implemented in an efficient FFT-based two-fluid Navier-Stokes solver, using an algebraic VoF method for the interface representation, and extended with the transport equations of thermal energy and vaporized liquid mass for the single-compon…
▽ More
We present a numerical method for interface-resolved simulations of evaporating two-fluid flows based on the volume-of-fluid (VoF) method. The method has been implemented in an efficient FFT-based two-fluid Navier-Stokes solver, using an algebraic VoF method for the interface representation, and extended with the transport equations of thermal energy and vaporized liquid mass for the single-component evaporating liquid in an inert gas. The conservation of vaporizing liquid and computation of the interfacial mass flux are performed with the aid of a reconstructed signed-distance field, which enables the use of well-established methods for phase change solvers based on level-set methods. The interface velocity is computed with a novel approach that ensures accurate mass conservation, by constructing a divergence-free extension of the liquid velocity field onto the entire domain. The resulting approach does not depend on the type of interface reconstruction (i.e.\ can be employed in both algebraic and geometrical VoF methods). We extensively verified and validated the overall method against several benchmark cases, and demonstrated its excellent mass conservation and good overall performance for simulating evaporating two-fluid flows in two and three dimensions.
△ Less
Submitted 14 January, 2020; v1 submitted 1 July, 2019;
originally announced July 2019.
