Showing 1–17 of 17 results for author: Sayem, A A

Record Photon Information Efficiency with Optical Clock Transmission and Recovery of 12.5 bits/photon over an Optical Channel with 77 dB Loss

Authors: René-Jean Essiambre, Cheng Guo, Sai Kanth Dacha, Alexei Ashikhmin, Andrea Blanco-Redondo, Frank R. Kschischang, Konrad Banaszek, Matthew Weiner, Rose Kopf, Ian Crawley, Mohamad H. Idjadi, Ayed A. Sayem, Jie Zhao, James D. Sandoz, Nicolas Fontaine, Nicole Menkart, Roland Ryf, John Cloonan, Michael Vasilyev, Thomas E. Murphy, Ellsworth C. Burrows

Abstract: We experimentally demonstrate optical detection at 12.5~bits per incident photon, 9.4~dB higher than the theoretical limit of conventional coherent detection. A single laser transmits both data and optical clock, undergoes 77~dB of attenuation before quantum detection followed by optical clock and data recovery. We experimentally demonstrate optical detection at 12.5~bits per incident photon, 9.4~dB higher than the theoretical limit of conventional coherent detection. A single laser transmits both data and optical clock, undergoes 77~dB of attenuation before quantum detection followed by optical clock and data recovery. △ Less

Submitted 3 October, 2023; originally announced October 2023.

Unveiling the origins of quasi-phase matching spectral imperfections in thin-film lithium niobate frequency doublers

Authors: Jie Zhao, Xiaoting Li, Ting-Chen Hu, Ayed Al Sayem, Haochuan Li, Al Tate, Kwangwoong Kim, Rose Kopf, Pouria Sanjari, Mark Earnshaw, Nicolas K. Fontaine, Cheng Wang, Andrea Blanco-Redondo

Abstract: Thin-film lithium niobate (TFLN) based frequency doublers have been widely recognized as essential components for both classical and quantum optical communications. Nonetheless, the efficiency of these devices is hindered by imperfections present in the quasi-phase matching (QPM) spectrum. In this study, we present a thorough analysis of the spectral imperfections in TFLN frequency doublers with v… ▽ More Thin-film lithium niobate (TFLN) based frequency doublers have been widely recognized as essential components for both classical and quantum optical communications. Nonetheless, the efficiency of these devices is hindered by imperfections present in the quasi-phase matching (QPM) spectrum. In this study, we present a thorough analysis of the spectral imperfections in TFLN frequency doublers with varying lengths, ranging from 5 mm to 15 mm. Employing a non-destructive diagnostic method based on scattered light imaging, we identify the sources and waveguide sections that contribute to the imperfections in the QPM spectrum. Furthermore, by mapping the TFLN film thickness across the entire waveguiding regions, we successfully reproduce the QPM spectra numerically, thus confirming the prominent influence of film thickness variations on the observed spectral imperfections. This comprehensive investigation provides valuable insights into the identification and mitigation of spectral imperfections in TFLN-based frequency doublers, paving the way toward the realization of nonlinear optical devices with enhanced efficiency and improved spectral fidelity. △ Less

Submitted 13 July, 2023; originally announced July 2023.

Light-induced dynamic frequency shifting of microwave photons in a superconducting electro-optic converter

Authors: Yuntao Xu, Wei Fu, Yiyu Zhou, Mingrui Xu, Mohan Shen, Ayed Al Sayem, Hong X. Tang

Abstract: Hybrid superconducting-photonic microresonators are a promising platform for realizing microwave-to-optical transduction. However, the absorption of scattered photons by the superconductors leads to unintended microwave resonance frequency variation and linewidth broadening. Here, we experimentally study the dynamics of this effect and its impact on microwave-to-optics conversion in an integrated… ▽ More Hybrid superconducting-photonic microresonators are a promising platform for realizing microwave-to-optical transduction. However, the absorption of scattered photons by the superconductors leads to unintended microwave resonance frequency variation and linewidth broadening. Here, we experimentally study the dynamics of this effect and its impact on microwave-to-optics conversion in an integrated lithium niobate-superconductor hybrid resonator platform. We unveiled an adiabatic frequency shifting of the intracavity microwave photons induced by the fast photo-responses of the thin-film superconducting resonator. As a result, the temporal and spectral responses of electro-optics transduction are modified and well described by our theoretical model. This work provides important insights on the light-induced conversion dynamics which must be considered in future designs of hybrid superconducting-photonic system. △ Less

Submitted 19 November, 2022; originally announced November 2022.

Efficient and tunable blue light generation using lithium niobate nonlinear photonics

Authors: Ayed Al Sayem, Yubo Wang, Juanjuan Lu, Xianwen Liu, Alexander W. Bruch, Hong X. Tang

Abstract: Thin film lithium niobate (LN) has recently emerged as a playground for chip-scale nonlinear optics and leads to highly efficient frequency conversions from near infrared to near-visible bands. For many nonlinear and quantum photonics applications, it is desirable to operate deep into the visible band within LN's transparency window. However, the strong material dispersion at short wavelengths mak… ▽ More Thin film lithium niobate (LN) has recently emerged as a playground for chip-scale nonlinear optics and leads to highly efficient frequency conversions from near infrared to near-visible bands. For many nonlinear and quantum photonics applications, it is desirable to operate deep into the visible band within LN's transparency window. However, the strong material dispersion at short wavelengths makes phase-matching difficult, necessitating sub-micron scale control of domain structures for efficient quasi-phase-matching (QPM). Here we report the operation of thin film LN in the blue wavelength and high fidelity poling of thin-film LN waveguide to this regime. As a result, quasi-phase matching is realized between IR (871nm) and blue (435.5nm) wavelengths in a straight waveguide and prompts strong blue light generation with a conversion efficiency $2900\pm400\%W^{-1}cm^{-2}$ △ Less

Submitted 2 July, 2021; originally announced July 2021.

Comments: 5 Pages, 2 figures

Ultralow-threshold thin-film lithium niobate optical parametric oscillator

Authors: Juanjuan Lu, Ayed Al Sayem, Zheng Gong, Joshua B. Surya, Chang-Ling Zou, Hong X. Tang

Abstract: Materials with strong $χ^{(2)}$ optical nonlinearity, especially lithium niobate, play a critical role in building optical parametric oscillators (OPOs). However, chip-scale integration of low-loss $χ^{(2)}$ materials remains challenging and limits the threshold power of on-chip $χ^{(2)}$ OPO. Here we report the first on-chip lithium niobate optical parametric oscillator at the telecom wavelengths… ▽ More Materials with strong $χ^{(2)}$ optical nonlinearity, especially lithium niobate, play a critical role in building optical parametric oscillators (OPOs). However, chip-scale integration of low-loss $χ^{(2)}$ materials remains challenging and limits the threshold power of on-chip $χ^{(2)}$ OPO. Here we report the first on-chip lithium niobate optical parametric oscillator at the telecom wavelengths using a quasi-phase matched, high-quality microring resonator, whose threshold power ($\sim$30 $μ$W) is 400 times lower than that in previous $χ^{(2)}$ integrated photonics platforms. An on-chip power conversion efficiency of 11% is obtained at a pump power of 93 $μ$W. The OPO wavelength tuning is achieved by varying the pump frequency and chip temperature. With the lowest power threshold among all on-chip OPOs demonstrated so far, as well as advantages including high conversion efficiency, flexibility in quasi-phase matching and device scalability, the thin-film lithium niobate OPO opens new opportunities for chip-based tunable classical and quantum light sources and provides an potential platform for realizing photonic neural networks. △ Less

Submitted 12 January, 2021; originally announced January 2021.

Bidirectional electro-optic conversion reaching 1% efficiency with thin-film lithium niobate

Authors: Yuntao Xu, Ayed Al Sayem, Linran Fan, Sihao Wang, Risheng Cheng, Chang-Ling Zou, Wei Fu, Likai Yang, Mingrui Xu, Hong X. Tang

Abstract: Superconducting cavity electro-optics (EO) presents a promising route to coherently convert microwave and optical photons and distribute quantum entanglement between superconducting circuits over long-distance through an optical network. High EO conversion efficiency demands transduction materials with strong Pockels effect and excellent optical transparency. Thin-film Lithium Niobate (TFLN) offer… ▽ More Superconducting cavity electro-optics (EO) presents a promising route to coherently convert microwave and optical photons and distribute quantum entanglement between superconducting circuits over long-distance through an optical network. High EO conversion efficiency demands transduction materials with strong Pockels effect and excellent optical transparency. Thin-film Lithium Niobate (TFLN) offers these desired characteristics however so far has only delivered unidirectional conversion with efficiencies on the order of $10^{-5}$, largely impacted by its prominent photorefractive (PR) effect at cryogenic temperatures. Here we show that, by mitigating the PR effect and associated charge-screening effect, the device's conversion efficiency can be enhanced by orders of magnitude while maintaining stable cryogenic operation, thus allowing a demonstration of conversion bidirectionality and accurate quantification of on-chip efficiency. With the optimized monolithic integrated superconducting EO device based on TFLN-on-sapphire substrate, an on-chip conversion efficiency of 1.02% (internal efficiency, 15.2%) is realized. Our demonstration indicates that with further device improvement, it is feasible for TFLN to approach unitary internal conversion efficiency. △ Less

Submitted 31 December, 2020; v1 submitted 29 December, 2020; originally announced December 2020.

Mitigating photorefractive effect in thin-filmlithium niobate microring resonators

Authors: Yuntao Xu, Mohan Shen, Juanjuan Lu, Joshua Surya, Ayed Al Sayem, Hong X. Tang

Abstract: Thin-film lithium niobate is an attractive integrated photonics platform due to its low optical loss and favorable optical nonlinear and electro-optic properties. However, in applications such as second harmonic generation, frequency comb generation, and microwave-to-optics conversion, the device performance is strongly impeded by the photorefractive effect inherent in thin-films. In this paper, w… ▽ More Thin-film lithium niobate is an attractive integrated photonics platform due to its low optical loss and favorable optical nonlinear and electro-optic properties. However, in applications such as second harmonic generation, frequency comb generation, and microwave-to-optics conversion, the device performance is strongly impeded by the photorefractive effect inherent in thin-films. In this paper, we show that the dielectric cladding on lithium niobate microring resonator has a significant influence on the photorefractive effect. By removing the dielectric cladding layer, the photorefractive effect in lithium niobate ring resonators can be effectively mitigated. Our work presents a reliable approach to control the photorefractive effect on thin-film lithium niobate and will further advance the performance of integrated classical and quantum photonic devices based on thin-film lithium niobate. △ Less

Submitted 23 December, 2020; originally announced December 2020.

Photorefraction-induced Bragg scattering in cryogenic lithium niobate ring resonators

Authors: Yuntao Xu, Ayed Al Sayem, Chang-Ling Zou, Linran Fan, Hong X. Tang

Abstract: We report intracavity Bragg scattering induced by photorefractive (PR) effect in high-Q lithium niobate (LN) ring resonators at cryogenic temperatures. We show that, when a cavity mode is strongly excited, the PR effect imprints a long-lived periodic space-charge field. This residual field in turn creates a refractive index modulation pattern that dramatically enhances the back scattering of an in… ▽ More We report intracavity Bragg scattering induced by photorefractive (PR) effect in high-Q lithium niobate (LN) ring resonators at cryogenic temperatures. We show that, when a cavity mode is strongly excited, the PR effect imprints a long-lived periodic space-charge field. This residual field in turn creates a refractive index modulation pattern that dramatically enhances the back scattering of an incoming probe light, and results in selective and reconfigurable mode splittings. This PR-induced Bragg scattering effect, despite being undesired for many applications, could be utilized to enable optically programmable photonic components. △ Less

Submitted 19 December, 2020; originally announced December 2020.

Towards 1% single photon nonlinearity with periodically-poled lithium niobate microring resonators

Authors: Juanjuan Lu, Ming Li, Chang-Ling Zou, Ayed Al Sayem, Hong X. Tang

Abstract: The absence of the single-photon nonlinearity has been a major roadblock in developing quantum photonic circuits at optical frequencies. In this paper, we demonstrate a periodically-poled thin film lithium niobate microring resonator (PPLNMR) that reaches 5,000,000%/W second harmonic conversion efficiency---almost 20-fold enhancement over the state-of-the-art---by accessing its largest $χ^{(2)}$ t… ▽ More The absence of the single-photon nonlinearity has been a major roadblock in developing quantum photonic circuits at optical frequencies. In this paper, we demonstrate a periodically-poled thin film lithium niobate microring resonator (PPLNMR) that reaches 5,000,000%/W second harmonic conversion efficiency---almost 20-fold enhancement over the state-of-the-art---by accessing its largest $χ^{(2)}$ tensor component $d_{33}$ via quasi-phase matching. The corresponding single photon coupling rate $g/2π$ is estimated to be 1.2 MHz, which is an important milestone as it approaches the dissipation rate $κ/2π$ of best available lithium niobate microresonators developed in the community. Using a figure of merit defined as $g/κ$, our devices reach a single photon nonlinearity approaching 1%. We show that, by further scaling of the device, it is possible to improve the single photon nonlinearity to a regime where photon-blockade effect can be manifested. △ Less

Submitted 14 July, 2020; originally announced July 2020.

Journal ref: Optica 7, 1654-1659 (2020)

Cavity piezo-mechanics for superconducting-nanophotonic quantum interface

Authors: Xu Han, Wei Fu, Changchun Zhong, Chang-Ling Zou, Yuntao Xu, Ayed Al Sayem, Mingrui Xu, Sihao Wang, Risheng Cheng, Liang Jiang, Hong X. Tang

Abstract: Hybrid quantum systems are essential for the realization of distributed quantum networks. In particular, piezo-mechanics operating at typical superconducting qubit frequencies features low thermal excitations, and offers an appealing platform to bridge superconducting quantum processors and optical telecommunication channels. However, integrating superconducting and optomechanical elements at cryo… ▽ More Hybrid quantum systems are essential for the realization of distributed quantum networks. In particular, piezo-mechanics operating at typical superconducting qubit frequencies features low thermal excitations, and offers an appealing platform to bridge superconducting quantum processors and optical telecommunication channels. However, integrating superconducting and optomechanical elements at cryogenic temperatures with sufficiently strong interactions remains a tremendous challenge. Here, we report an integrated superconducting cavity piezo-optomechanical platform where 10-GHz phonons are resonantly coupled with photons in a superconducting and a nanophotonic cavities at the same time. Benefited from the achieved large piezo-mechanical cooperativity ($C_\mathrm{em}\sim7$) and the enhanced optomechanical coupling boosted by a pulsed optical pump, we demonstrate coherent interactions at cryogenic temperatures via the observation of efficient microwave-optical photon conversion. This hybrid interface makes a substantial step towards quantum communication at large scale, as well as novel explorations in microwave-optical photon entanglement and quantum sensing mediated by gigahertz phonons. △ Less

Submitted 21 February, 2020; v1 submitted 26 January, 2020; originally announced January 2020.

Lithium-Niobate-on-Insulator Waveguide-Integrated Superconducting Nanowire Single-Photon Detectors

Authors: Ayed Al Sayem, Risheng Cheng, Sihao Wang, Hong X. Tang

Abstract: We demonstrate waveguide-integrated superconducting nanowire single-photon detectors on thin-film lithium niobate (LN). Using a 250 um-long NbN superconducting nanowire lithographically defined on top of a 125 um-long LN nanowaveguide, on-chip detection efficiency of 46% is realized with simultaneous high performance in dark count rate and timing jitter. As LN possesses high second-order nonlinear… ▽ More We demonstrate waveguide-integrated superconducting nanowire single-photon detectors on thin-film lithium niobate (LN). Using a 250 um-long NbN superconducting nanowire lithographically defined on top of a 125 um-long LN nanowaveguide, on-chip detection efficiency of 46% is realized with simultaneous high performance in dark count rate and timing jitter. As LN possesses high second-order nonlinear \c{hi}(2) and electro-optic properties, an efficient single-photon detector on thin-film LN opens up the possibility to construct small scale fully-integrated quantum photonic chip which includes single-photon sources, filters, tunable quantum gates and detectors. △ Less

Submitted 19 December, 2019; originally announced December 2019.

All Dielectric Biaxial Metamaterial: A New Route to Lossless Dyakonov Waves with Higher Angular Existence Domain

Authors: Ayed Al Sayem

Abstract: In this article, we propose and numerically analyze an all dielectric biaxial metamaterial [ADBM] constructed by multilayer pattering of a sub-wavelength ridge array of Silicon and a flat SiO2 layer. The proposed ADBM can support Dyakonov Surface Waves [DSWs] with infinite propagation length which can propagate in a wide angular domain. Though natural uniaxial and biaxial materials and also nanowi… ▽ More In this article, we propose and numerically analyze an all dielectric biaxial metamaterial [ADBM] constructed by multilayer pattering of a sub-wavelength ridge array of Silicon and a flat SiO2 layer. The proposed ADBM can support Dyakonov Surface Waves [DSWs] with infinite propagation length which can propagate in a wide angular domain. Though natural uniaxial and biaxial materials and also nanowire all dielectric metamaterials can also support DSWs, the angular existence domain [AED] is limited to a very narrow range. Our proposed ADBM can support can overcome this limitation and it can achieve higher AED than any all dielectric structures reported in literature till date. Our proposed ADBM can be easily fabricated by the current fabrication technology. Due to its lossless nature, it may find substantial applications in optical sensing, optical interconnects, wave-guiding, solar energy harvesting etc. △ Less

Submitted 16 January, 2017; originally announced January 2017.

Comments: 17 Pages

All Dielectric Metamaterial Loaded Tunable Plasmonic Waveguide

Authors: Abid Anjum Sifat, Ayed Al Sayem, M Mahmudul Hasan Sajeeb

Abstract: In this article, a 2D plasmonic waveguide loaded with all dielectric anisotropic metamaterial, consisting of alternative layers of Si-SiO2, has been theoretically proposed and numerically analyzed. Main characteristics of waveguide i.e. propagation constant, propagation length and normalized mode area have been calculated for different values of ridge width and height at telecommunication waveleng… ▽ More In this article, a 2D plasmonic waveguide loaded with all dielectric anisotropic metamaterial, consisting of alternative layers of Si-SiO2, has been theoretically proposed and numerically analyzed. Main characteristics of waveguide i.e. propagation constant, propagation length and normalized mode area have been calculated for different values of ridge width and height at telecommunication wavelength. The respective 1D structure of the waveguide has been analytically solved for the anisotropic ridge as a single uniaxial medium with dielectric tensor defined by Effective Medium Theory (EMT). The 2D structure has been analyzed numerically through FEM simulation using Mode analysis module in Comsol Multiphysics. Both the EMT and real multilayer structure have been considered in numerical simulations. Such structure with all dielectric metamaterial provides an extra degree of freedom namely fill factor, fraction of Si layer in a Si-SiO2 unit cell, to tune the propagation characteristics compared to the conventional DLSSP waveguide. A wide range of variations in all the characteristics have been observed for different fill factor values. Besides, the effect of the first interface layer has also been considered. Though all dielectric metamaterial has already been utilized in photonic waveguide as cladding, the implementation in plasmonic waveguide has not been investigated yet to our best knowledge. The proposed device might be a potential in deep sub-wavelength optics, PIC and optoelectronics. △ Less

Submitted 28 December, 2016; originally announced December 2016.

Comments: 13 pages, 8 figures

Broad Angle Negative Refraction in Lossless all Dielectric Multilayer Asymmetric Anisotropic Metamaterial

Authors: Ayed Al Sayem, Mahdy Rahman Chowdhury Mahdy, Md. Saifur Rahman

Abstract: In this article, it has been theoretically shown that broad angle negative refraction is possible with asymmetric anisotropic metamaterials constructed by only dielectrics or loss less semiconductors at the telecommunication and relative wavelength range. Though natural uniaxial materials can exhibit negative refraction, the maximum angle of negative refraction and critical incident angle lie in a… ▽ More In this article, it has been theoretically shown that broad angle negative refraction is possible with asymmetric anisotropic metamaterials constructed by only dielectrics or loss less semiconductors at the telecommunication and relative wavelength range. Though natural uniaxial materials can exhibit negative refraction, the maximum angle of negative refraction and critical incident angle lie in a very narrow range. This notable problem can be overcome by our proposed structure. In our structures, negative refraction originates from the highly asymmetric elliptical iso-frequency.This is artificially created by the rotated multilayer sub-wavelength dielectric/semiconductor stack, which act as an effective asymmetric anisotropic metamaterial.This negative refraction is achieved without using any negative permittivity materials such as metals. As we are using simple dielectrics, fabrication of such structures would be less complex than that of the metal based metamaterials. Our proposed ideas have been validated numerically and also by the full wave simulations considering both the effective medium approach and realistic structure model. This device might find some important applications in photonics and optoelectronics. △ Less

Submitted 26 May, 2015; originally announced May 2015.

Comments: 14 pages , 6 figures

Negative Refraction with High Transmission in Graphene-hBN Hyper Crystal

Authors: Ayed Al Sayem, Mahdy Rahman Chowdhury Mahdy, Ifat Jahangir, Md. Saifur Rahman

Abstract: In this article, we have theoretically investigated the performance of graphene-hexagonal Boron Nitride hyper crystals to demonstrate all angle negative refraction.Hexagonal Boron Nitride, the latest natural hyperbolic material; can be a very strong contender to form a hyper crystal with graphene due to its excellence as a graphene-compatible substrate. Although bare hexagonal Boron Nitride can ex… ▽ More In this article, we have theoretically investigated the performance of graphene-hexagonal Boron Nitride hyper crystals to demonstrate all angle negative refraction.Hexagonal Boron Nitride, the latest natural hyperbolic material; can be a very strong contender to form a hyper crystal with graphene due to its excellence as a graphene-compatible substrate. Although bare hexagonal Boron Nitride can exhibit negative refraction, the transmission is generally low due to its high reflective nature. On the other hand, due to two dimensional nature and metallic characteristics of graphene in the frequency range where hexagonal Boron Nitride behaves as a type-I hyperbolic Metamaterial, we have found that graphene-hexagonal Boron Nitride hyper-crystals exhibit all angle negative refraction with superior transmission. This has been possible because of the strong suppression of reflection from the hyper-crystal without any adverse effect on the negative refraction properties. This finding can prove very useful in applications such as superlensing, routing and imaging within a particular frequency range. We have also presented an effective medium description of the hyper crystal in the low k limit and validated the proposed theory using general transfer matrix method and also full wave simulation. △ Less

Submitted 5 May, 2015; originally announced May 2015.

Comments: 20 pages, 6 figures

Ultrathin Ultra-broadband Electro-Absorption Modulator based on Few-layer Graphene based Anisotropic Metamaterial

Authors: Ayed Al Sayem, Mahdy Rahman Chowdhury Mahdy, Ifat Jahangir, Md. Saifur Rahman

Abstract: In this article, a few-layered graphene-dielectric multilayer (metamaterial) electro-optic modulator has been proposed in the mid and far infrared range that works on electro-absorption mechanism. Graphene, both mono layer and few layer, is an actively tunable optical material that allows control of inter-band and intra-band transition by tuning its chemical potential. Utilizing this unique featur… ▽ More In this article, a few-layered graphene-dielectric multilayer (metamaterial) electro-optic modulator has been proposed in the mid and far infrared range that works on electro-absorption mechanism. Graphene, both mono layer and few layer, is an actively tunable optical material that allows control of inter-band and intra-band transition by tuning its chemical potential. Utilizing this unique feature of graphene, we propose a multilayer graphene dielectric stack where few layer graphene is preferred over mono layer graphene. Although the total thickness of the stack still remains in the nanometer range, this device can exhibit superior performances in terms of (i) high modulation depth, (ii) ultra-broadband performance, (iii) ultra-low insertion loss due to inherent metamaterial properties, (iv) nanoscale footprint, (v) polarization independence and (vi) capability of being integrated to a silicon waveguide. Interestingly, these superior performances, achievable by using few layer graphene with carefully designed metamaterial, may not be possible with mono layer graphene. Our proposals have been validated by both the effective medium theory and general transfer matrix method. △ Less

Submitted 14 April, 2015; originally announced April 2015.

Comments: 20 Pages, 6 Figures

Material Independent Long Distance Pulling, Trapping, and Rotation of Fully Immersed Multiple Objects with a Single Optical Set-up

Authors: Md. Masudur Rahman, Ayed Al Sayem, Mahdy Rahman Chowdhury Mahdy, Md. Ehsanul Haque, Rakibul Islam, S. Tanvir-ur-Rahman Chowdhury, Manuel Nieto-Vesperinas, Md. Abdul Matin

Abstract: Optical pulling with tractor beams is so far highly dependent on (i) the property of embedding background or the particle itself , (ii) the number of the particles and/or (iii) the manual ramping of beam phase. A necessary theoretical solution of these problems is proposed here. This article demonstrates a novel active tractor beam for multiple fully immersed objects with its additional abilities… ▽ More Optical pulling with tractor beams is so far highly dependent on (i) the property of embedding background or the particle itself , (ii) the number of the particles and/or (iii) the manual ramping of beam phase. A necessary theoretical solution of these problems is proposed here. This article demonstrates a novel active tractor beam for multiple fully immersed objects with its additional abilities of yielding a controlled rotation and a desired 3D trapping. Continuous and stable long distance levitation, controlled rotation and 3D trapping are demonstrated with a single optical set-up by using two coaxial, or even non-coaxial, superimposed non-diffracting higher order Bessel beams of reverse helical nature and different frequencies. The superimposed beam has periodic intensity variations both along and around the beam-axis because of the difference in longitudinal wave-vectors and beam orders, respectively. The difference in frequencies of two laser beams makes the intensity pattern move along and around the beam-axis in a continuous way without manual ramping of phase, which allows for either linear motion (forward or backward) or angular movement (clockwise or anticlockwise) of fully immersed multiple particles. As a major contribution, the condition for increasing the target binding regions is also proposed to manipulate multiple immersed objects of different sizes and shapes. △ Less

Submitted 2 April, 2015; originally announced April 2015.

Comments: 34 pages, 10 figures, links of two video files provided [This new work can be imperative for the investigations of realistic tractor beams ; specially for fully immersed multiple objects (see this Wikipedia link of previous tractor beams :http://en.wikipedia.org/wiki/Tractor_beam )]