-
Identification of parameters in the torsional dynamics of a drilling process through Bayesian statistics
Authors:
Mario Germán Sandoval,
Americo Cunha Jr,
Rubens Sampaio
Abstract:
This work presents the estimation of the parameters of an experimental setup, which is modeled as a system with three degrees of freedom, composed by a shaft, two rotors, and a DC motor, that emulates a drilling process. A Bayesian technique is used in the estimation process, to take into account the uncertainties and variabilities intrinsic to the measurement taken, which are modeled as a noise o…
▽ More
This work presents the estimation of the parameters of an experimental setup, which is modeled as a system with three degrees of freedom, composed by a shaft, two rotors, and a DC motor, that emulates a drilling process. A Bayesian technique is used in the estimation process, to take into account the uncertainties and variabilities intrinsic to the measurement taken, which are modeled as a noise of Gaussian nature. With this procedure it is expected to check the reliability of the nominal values of the physical parameters of the test rig. An estimation process assuming that nine parameters of the experimental apparatus are unknown is conducted, and the results show that for some quantities the relative deviation with respect to the nominal values is very high. This deviation evidentiates a strong deficiency in the mathematical model used to describe the dynamic behavior of the experimental apparatus.
△ Less
Submitted 26 July, 2021;
originally announced July 2021.
-
Effect of an attached end mass in the dynamics of uncertainty nonlinear continuous random system
Authors:
Americo Cunha Jr,
Rubens Sampaio
Abstract:
This work studies the dynamics of a one dimensional elastic bar with random elastic modulus and prescribed boundary conditions, say, fixed at one end, and attached to a lumped mass and two springs (one linear and another nonlinear) on the other extreme. The system analysis assumes that the elastic modulus has gamma probability distribution and uses Monte Carlo simulations to compute the propagatio…
▽ More
This work studies the dynamics of a one dimensional elastic bar with random elastic modulus and prescribed boundary conditions, say, fixed at one end, and attached to a lumped mass and two springs (one linear and another nonlinear) on the other extreme. The system analysis assumes that the elastic modulus has gamma probability distribution and uses Monte Carlo simulations to compute the propagation of uncertainty in this continuous--discrete system. After describing the deterministic and the stochastic modeling of the system, some configurations of the model are analyzed in order to characterize the effect of the lumped mass in the overall behavior of this dynamical system.
△ Less
Submitted 26 July, 2021;
originally announced July 2021.
-
Computational modeling of the nonlinear stochastic dynamics of horizontal drillstrings
Authors:
Americo Cunha Jr,
Christian Soize,
Rubens Sampaio
Abstract:
This work intends to analyze the nonlinear stochastic dynamics of drillstrings in horizontal configuration. For this purpose, it considers a beam theory, with effects of rotatory inertia and shear deformation, which is capable of reproducing the large displacements that the beam undergoes. The friction and shock effects, due to beam/borehole wall transversal impacts, as well as the force and torqu…
▽ More
This work intends to analyze the nonlinear stochastic dynamics of drillstrings in horizontal configuration. For this purpose, it considers a beam theory, with effects of rotatory inertia and shear deformation, which is capable of reproducing the large displacements that the beam undergoes. The friction and shock effects, due to beam/borehole wall transversal impacts, as well as the force and torque induced by bit-rock interaction, are also considered in the model. Uncertainties of bit-rock interaction model are taken into account using a parametric probabilistic approach. Numerical simulations have shown that the mechanical system of interest has a very rich nonlinear stochastic dynamics, which generate phenomena such as bit-bounce, stick-slip, and transverse impacts. A study aiming to maximize the drilling process efficiency, varying drillstring velocities of translation and rotation is presented. Also, the work presents the definition and solution of two optimizations problems, one deterministic and one robust, where the objective is to maximize drillstring rate of penetration into the soil respecting its structural limits.
△ Less
Submitted 27 May, 2021;
originally announced May 2021.
-
Sound transmission loss through double glazing windows in low frequency range
Authors:
Walid Larbi,
Chaima Soussi,
Jean-François Deü,
Rubens Sampaio
Abstract:
The domestic windows in the exterior building facade play a significant role in sound insulation against outdoor airborne noise. The prediction of their acoustic performances is classically carried out in laboratory according to standard ISO 10140. In this work, a 3D elasto-acoustic finite element model (FEM) is proposed to predict the sound reduction index of three different glazing configuration…
▽ More
The domestic windows in the exterior building facade play a significant role in sound insulation against outdoor airborne noise. The prediction of their acoustic performances is classically carried out in laboratory according to standard ISO 10140. In this work, a 3D elasto-acoustic finite element model (FEM) is proposed to predict the sound reduction index of three different glazing configurations of domestic window, which are compared to laboratory measurements. Two acoustic cavities with rigid-boundaries on both sides of the window are used to simulate respectively the diffuse field on the source side and the pressure field on the receiver side. By using a simplified FEM for the double glazed windows, the sound reduction index is calculated from the difference between the source and receiving sound pressure levels in the one-third octave band from 100 to 500 Hz.
△ Less
Submitted 2 March, 2020;
originally announced March 2020.
-
Community Detection for Power Systems Network Aggregation Considering Renewable Variability
Authors:
Raphael Araujo Sampaio,
Gerson Couto Oliveira,
Luiz Carlos da Costa Jr.,
Joaquim Dias Garcia
Abstract:
The increasing penetration of variable renewable energy (VRE) has brought significant challenges for power systems planning and operation. These highly variable sources are typically distributed in the grid; therefore, a detailed representation of transmission bottlenecks is fundamental to approximate the impact of the transmission network on the dispatch with VRE resources. The fine grain tempora…
▽ More
The increasing penetration of variable renewable energy (VRE) has brought significant challenges for power systems planning and operation. These highly variable sources are typically distributed in the grid; therefore, a detailed representation of transmission bottlenecks is fundamental to approximate the impact of the transmission network on the dispatch with VRE resources. The fine grain temporal scale of short term and day-ahead dispatch, taking into account the network constraints, also mandatory for mid-term planning studies, combined with the high variability of the VRE has brought the need to represent these uncertainties in stochastic optimization models while taking into account the transmission system. These requirements impose a computational burden to solve the planning and operation models. We propose a methodology based on community detection to aggregate the network representation, capable of preserving the locational marginal price (LMP) differences in multiple VRE scenarios, and describe a real-world operational planning study. The optimal expected cost solution considering aggregated networks is compared with the full network representation. Both representations were embedded in an operation model relying on Stochastic Dual Dynamic Programming (SDDP) to deal with the random variables in a multi-stage problem.
△ Less
Submitted 8 November, 2019;
originally announced November 2019.
