-
Laser-written scalable sapphire integrated photonics platform
Authors:
Mohan Wang,
Patrick S. Salter,
Frank P. Payne,
Tongyu Liu,
Martin J. Booth,
Julian A. J. Fells
Abstract:
In this paper, we demonstrate the integration of photonic devices on sapphire substrates using multi-layer depressed cladding waveguides at both 780 nm and 1550 nm. The devices are up to 10-cm long and written at depths down to 400 um. The propagation losses for single-mode guiding are ~ 0.6 dB/cm at 780 nm and ~ 0.7 dB/cm at 1550 nm. A number of structures have been fabricated with simultaneous s…
▽ More
In this paper, we demonstrate the integration of photonic devices on sapphire substrates using multi-layer depressed cladding waveguides at both 780 nm and 1550 nm. The devices are up to 10-cm long and written at depths down to 400 um. The propagation losses for single-mode guiding are ~ 0.6 dB/cm at 780 nm and ~ 0.7 dB/cm at 1550 nm. A number of structures have been fabricated with simultaneous single-mode and polarization independent operation: evanescently coupled waveguide arrays, Y-branch splitters, Mach-Zehnder interferometers, and a 2x2 directional-coupler. All the devices were fabricated using adaptive optics-assisted femtosecond laser direct writing with a customized laser writing algorithm. This work enables the integration of single-mode sapphire photonics devices in a scalable manner, enabling many applications in communications, imaging, computing, and sensing.
△ Less
Submitted 19 September, 2024;
originally announced September 2024.
-
Polarization based modulation of splitting ratio in femtosecond laser direct written directional couplers
Authors:
Zhi-Kai Pong,
Bangshan Sun,
Patrick S. Salter,
Martin J. Booth
Abstract:
This work characterizes a phenomenon in direct laser written directional couplers where the splitting ratio for output light is dependent on the input polarization state. In general, for laser written waveguides, different coupling strengths exist for different polarization states of the input light. If the linear polarization state of the input light is not aligned with one of the symmetry axes o…
▽ More
This work characterizes a phenomenon in direct laser written directional couplers where the splitting ratio for output light is dependent on the input polarization state. In general, for laser written waveguides, different coupling strengths exist for different polarization states of the input light. If the linear polarization state of the input light is not aligned with one of the symmetry axes of the system, an additional amplitude beating is imposed on the transfer of light in directional couplers of different interaction length. We present results for in-plane and out of plane directional couplers, which are supported by theoretical analysis. These new results provide insights for understanding and controlling polarization properties of directional couplers and larger photonic circuits.
△ Less
Submitted 4 December, 2023; v1 submitted 20 November, 2023;
originally announced November 2023.
-
High-precision optical fiber sensing beyond 1000°C
Authors:
Mohan Wang,
Patrick S. Salter,
Frank P. Payne,
Adrian Shipley,
Igor N. Dyson,
Tongyu Lui,
1tao Wang,
Kaihui Zhang,
Jian Zhang,
Zhitai Jia,
Stephen M. Morris,
Martin J. Booth,
Julian A. J. Fells
Abstract:
Sapphire fiber can withstand around 2000°C, but it is multimoded, giving poor precision sensors. We demonstrate a single-mode sapphire fiber Bragg grating temperature sensor operating up to 1200°C. The repeatability above 1000°C is within {\pm}0.08%.
Sapphire fiber can withstand around 2000°C, but it is multimoded, giving poor precision sensors. We demonstrate a single-mode sapphire fiber Bragg grating temperature sensor operating up to 1200°C. The repeatability above 1000°C is within {\pm}0.08%.
△ Less
Submitted 14 August, 2023;
originally announced September 2023.
-
High Speed Precise Refractive Index Modification for Photonic Chips through Phase Aberrated Pulsed Lasers
Authors:
Bangshan Sun,
Simon Moser,
Alexander Jesacher,
Patrick S. Salter,
Robert R. Thomson,
Martin J. Booth
Abstract:
Integrated photonic chips have significant potential in telecommunications, classic computing, quantum systems, and topological photonics. Direct laser writing offers unique capability for creating three-dimensional photonic devices in an optical glass chip with quick prototyping. However, existing laser writing schemes cannot create index-modified structures in glass that precisely match the lase…
▽ More
Integrated photonic chips have significant potential in telecommunications, classic computing, quantum systems, and topological photonics. Direct laser writing offers unique capability for creating three-dimensional photonic devices in an optical glass chip with quick prototyping. However, existing laser writing schemes cannot create index-modified structures in glass that precisely match the laser focal shape while also achieving high scanning speed and high refractive index contrast. Here, we introduce the theory of a refractive index modification scheme that combines the advantages of both traditional non-thermal and thermal regime fabrication methods. We also propose a model of waveguide formation that was verified through a thorough study on the effects of phase aberrations on the laser focus. The presented new photonic chip fabrication scheme uses a novel focal intensity distribution, where pulse energy is relocated to the bottom of a laser focus by manipulating primary and higher order spherical aberrations. The technique can produce index modifications with high scanning speed (20 mm/s or higher), high index contrast (16 x 10-3), and high precision to fabricate with arbitrary cross-sections. This method has potential to expand the capabilities of photonic chips in applications that require small-scale, high precision, or high contrast refractive index control.
△ Less
Submitted 26 July, 2023;
originally announced July 2023.
-
Additive GaN solid immersion lenses for enhanced photon extraction efficiency from diamond color centers
Authors:
Xingrui Cheng,
Nils Kolja Wessling,
Saptarsi Ghosh,
Andrew R. Kirkpatrick,
Menno J. Kappers,
Yashna N. D. Lekhai,
Gavin W. Morley,
Rachel A. Oliver,
Jason M. Smith,
Martin D. Dawson,
Patrick S. Salter,
Michael J. Strain
Abstract:
Effective light extraction from optically active solid-state spin centres inside high-index semiconductor host crystals is an important factor in integrating these pseudo-atomic centres in wider quantum systems. Here we report increased fluorescent light collection efficiency from laser-written nitrogen vacancy centers (NV) in bulk diamond facilitated by micro-transfer printed GaN solid immersion…
▽ More
Effective light extraction from optically active solid-state spin centres inside high-index semiconductor host crystals is an important factor in integrating these pseudo-atomic centres in wider quantum systems. Here we report increased fluorescent light collection efficiency from laser-written nitrogen vacancy centers (NV) in bulk diamond facilitated by micro-transfer printed GaN solid immersion lenses. Both laser-writing of NV centres and transfer printing of micro-lens structures are compatible with high spatial resolution, enabling deterministic fabrication routes towards future scalable systems development. The micro-lenses are integrated in a non-invasive manner, as they are added on top of the unstructured diamond surface and bond by Van-der-Waals forces. For emitters at 5 micrometer depth, we find approximately 2x improvement of fluorescent light collection using an air objective with a numerical aperture of NA = 0.95 in good agreement with simulations. Similarly, the solid immersion lenses strongly enhance light collection when using an objective with NA = 0.5, significantly improving the signal-to-noise ratio of the NV center emission while maintaining the NV's quantum properties after integration.
△ Less
Submitted 20 June, 2023;
originally announced June 2023.
-
Single-mode sapphire fiber Bragg grating
Authors:
Mohan Wang,
Patrick S. Salter,
Frank P. Payne,
Adrian Shipley,
Stephen M. Morris,
Martin J. Booth,
Julian A. J. Fells
Abstract:
We present here the inscription of single-mode waveguides with Bragg gratings in sapphire. The waveguide Bragg gratings have a novel multi-layer depressed cladding design in the 1550 nm telecommunications waveband. The Bragg gratings have a narrow bandwidth (<0.5 nm) and have survived annealing at 1000°C. The structures are inscribed with femtosecond laser direct writing, using adaptive beam shapi…
▽ More
We present here the inscription of single-mode waveguides with Bragg gratings in sapphire. The waveguide Bragg gratings have a novel multi-layer depressed cladding design in the 1550 nm telecommunications waveband. The Bragg gratings have a narrow bandwidth (<0.5 nm) and have survived annealing at 1000°C. The structures are inscribed with femtosecond laser direct writing, using adaptive beam shaping with a non-immersion objective. A single-mode sapphire fiber Bragg grating is created by writing a waveguide with a Bragg grating within a 425 μm diameter sapphire optical fiber, providing significant potential for accurate remote sensing in ultra-extreme environments.
△ Less
Submitted 23 December, 2021;
originally announced December 2021.
-
On-chip beam rotators, adiabatic mode converters, and waveplates through low-loss waveguides with variable cross-sections
Authors:
Bangshan Sun,
Fyodor Morozko,
Patrick S. Salter,
Simon Moser,
Zhikai Pong,
Raj B. Patel,
Ian A. Walmsley,
Mohan Wang,
Adir Hazan,
Nicolas Barre,
Alexander Jesacher,
Julian Fells,
Chao He,
Aviad Katiyi,
ZhenNan Tian,
Alina Karabchevsky,
Martin J. Booth
Abstract:
Photonics integrated circuitry would benefit considerably from the ability to arbitrarily control waveguide cross-sections with high precision and low loss, in order to provide more degrees of freedom in manipulating propagating light. Here, we report a new method for femtosecond laser writing of optical-fibre-compatible glass waveguides, namely spherical phase induced multi-core waveguide (SPIM-W…
▽ More
Photonics integrated circuitry would benefit considerably from the ability to arbitrarily control waveguide cross-sections with high precision and low loss, in order to provide more degrees of freedom in manipulating propagating light. Here, we report a new method for femtosecond laser writing of optical-fibre-compatible glass waveguides, namely spherical phase induced multi-core waveguide (SPIM-WG), which addresses this challenging task with three dimensional on-chip light control. Fabricating in the heating regime with high scanning speed, precise deformation of cross-sections is still achievable along the waveguide, with shapes and sizes finely controllable of high resolution in both horizontal and vertical transversal directions. We observed that these waveguides have high refractive index contrast of 0.017, low propagation loss of 0.14 dB/cm, and very low coupling loss of 0.19 dB coupled from a single mode fibre. SPIM-WG devices were easily fabricated that were able to perform on-chip beam rotation through varying angles, or manipulate polarization state of propagating light for target wavelengths. We also demonstrated SPIM-WG mode converters that provide arbitrary adiabatic mode conversion with high efficiency between symmetric and asymmetric non-uniform modes; examples include circular, elliptical modes and asymmetric modes from ppKTP (periodically-poled potassium titanyl phosphate) waveguides which are generally applied in frequency conversion and quantum light sources. Created inside optical glass, these waveguides and devices have the capability to operate across ultra-broad bands from visible to infrared wavelengths. The compatibility with optical fibre also paves the way toward packaged photonic integrated circuitry, which usually needs input and output fibre connections.
△ Less
Submitted 14 July, 2022; v1 submitted 5 December, 2021;
originally announced December 2021.
-
Revealing complex optical phenomena through vectorial metrics
Authors:
Chao He,
Jintao Chang,
Patrick S. Salter,
Yuanxing Shen,
Ben Dai,
Pengcheng Li,
Yihan Jin,
Samlan Chandran Thodika,
Mengmeng Li,
Aziz Tariq,
Jingyu Wang,
Jacopo Antonello,
Yang Dong,
Ji Qi,
Jianyu Lin,
Honghui He,
Daniel S. Elson,
Min Zhang,
Hui Ma,
Martin J. Booth
Abstract:
Advances in vectorial polarisation-resolved imaging are bringing new capabilities to applications ranging from fundamental physics through to clinical diagnosis. Imaging polarimetry requires determination of the Mueller matrix (MM) at every point, providing a complete description of an object's vectorial properties. Despite forming a comprehensive representation, the MM does not usually provide ea…
▽ More
Advances in vectorial polarisation-resolved imaging are bringing new capabilities to applications ranging from fundamental physics through to clinical diagnosis. Imaging polarimetry requires determination of the Mueller matrix (MM) at every point, providing a complete description of an object's vectorial properties. Despite forming a comprehensive representation, the MM does not usually provide easily-interpretable information about the object's internal structure. Certain simpler vectorial metrics are derived from subsets of the MM elements. These metrics permit extraction of signatures that provide direct indicators of hidden optical properties of complex systems, while featuring an intriguing asymmetry about what information can or cannot be inferred via these metrics. We harness such characteristics to reveal the spin-Hall effect of light, infer microscopic structure within laser-written photonic waveguides, and conduct rapid pathological diagnosis through analysis of healthy and cancerous tissue. This provides new insight for the broader usage of such asymmetric inferred vectorial information.
△ Less
Submitted 21 July, 2021; v1 submitted 20 July, 2021;
originally announced July 2021.
-
Laser writing of scalable single colour centre in silicon carbide
Authors:
Yu-Chen Chen,
Patrick S. Salter,
Matthias Niethammer,
Matthias Widmann,
Florian Kaiser,
Roland Nagy,
Naoya Morioka,
Charles Babin,
J ürgen Erlekampf,
Patrick Berwian,
Martin Booth,
J örg Wrachtrup
Abstract:
Single photon emitters in silicon carbide (SiC) are attracting attention as quantum photonic systems. However, to achieve scalable devices it is essential to generate single photon emitters at desired locations on demand. Here we report the controlled creation of single silicon vacancy ($V_{Si}$) centres in 4H-SiC using laser writing without any post-annealing process. Due to the aberration correc…
▽ More
Single photon emitters in silicon carbide (SiC) are attracting attention as quantum photonic systems. However, to achieve scalable devices it is essential to generate single photon emitters at desired locations on demand. Here we report the controlled creation of single silicon vacancy ($V_{Si}$) centres in 4H-SiC using laser writing without any post-annealing process. Due to the aberration correction in the writing apparatus and the non-annealing process, we generate single $V_{Si}$ centres with yields up to 30%, located within about 80 nm of the desired position in the transverse plane. We also investigated the photophysics of the laser writing $V_{Si}$ centres and conclude that there are about 16 photons involved in the laser writing $V_{Si}$ centres process. Our results represent a powerful tool in fabrication of single $V_{Si}$ centres in SiC for quantum technologies and provide further insights into laser writing defects in dielectric materials.
△ Less
Submitted 11 December, 2018;
originally announced December 2018.
-
Three-dimensional solid-state qubit arrays with long-lived spin coherence
Authors:
C. J. Stephen,
B. L. Green,
Y. N. D. Lekhai,
L. Weng,
P. Hill,
S. Johnson,
A. C. Frangeskou,
P. L. Diggle,
M. J. Strain,
E. Gu,
M. E. Newton,
J. M. Smith,
P. S. Salter,
G. W. Morley
Abstract:
Three-dimensional arrays of silicon transistors increase the density of bits. Solid-state qubits are much larger so could benefit even more from using the third dimension given that useful fault-tolerant quantum computing will require at least 100,000 physical qubits and perhaps one billion. Here we use laser writing to create 3D arrays of nitrogen-vacancy centre (NVC) qubits in diamond. This woul…
▽ More
Three-dimensional arrays of silicon transistors increase the density of bits. Solid-state qubits are much larger so could benefit even more from using the third dimension given that useful fault-tolerant quantum computing will require at least 100,000 physical qubits and perhaps one billion. Here we use laser writing to create 3D arrays of nitrogen-vacancy centre (NVC) qubits in diamond. This would allow 5 million qubits inside a commercially available 4.5x4.5x0.5 mm diamond based on five nuclear qubits per NVC and allowing $(10 μm)^3$ per NVC to leave room for our laser-written electrical control. The spin coherence times we measure are an order of magnitude longer than previous laser-written qubits and at least as long as non-laser-written NVC. As well as NVC quantum computing, quantum communication and nanoscale sensing could benefit from the same platform. Our approach could also be extended to other qubits in diamond and silicon carbide.
△ Less
Submitted 10 July, 2018;
originally announced July 2018.
-
Microscope calibration using laser written fluorescence
Authors:
Alexander D. Corbett,
Michael Shaw,
Andrew Yacoot,
Andrew Jefferson,
Lothar Schermelleh,
Tony Wilson,
Martin Booth,
Patrick S. Salter
Abstract:
There is currently no widely adopted standard for the optical characterisation of fluorescence microscopes. We used laser written fluorescence to generate two- and three-dimensional patterns to deliver a quick and quantitative measure of imaging performance. We report on the use of two laser written patterns to measure the lateral resolution, illumination uniformity, lens distortion and colour pla…
▽ More
There is currently no widely adopted standard for the optical characterisation of fluorescence microscopes. We used laser written fluorescence to generate two- and three-dimensional patterns to deliver a quick and quantitative measure of imaging performance. We report on the use of two laser written patterns to measure the lateral resolution, illumination uniformity, lens distortion and colour plane alignment using confocal and structured illumination fluorescence microscopes.
△ Less
Submitted 14 June, 2018;
originally announced June 2018.
-
High resolution structural characterisation of laser-induced defect clusters inside diamond
Authors:
Patrick S. Salter,
Martin J. Booth,
Arnaud Courvoisier,
David A. J. Moran,
Donald A. MacLaren
Abstract:
Laser writing with ultrashort pulses provides a potential route for the manufacture of three-dimensional wires, waveguides and defects within diamond. We present a transmission electron microscopy (TEM) study of the intrinsic structure of the laser modifications and reveal a complex distribution of defects. Electron energy loss spectroscopy (EELS) indicates that the majority of the irradiated regi…
▽ More
Laser writing with ultrashort pulses provides a potential route for the manufacture of three-dimensional wires, waveguides and defects within diamond. We present a transmission electron microscopy (TEM) study of the intrinsic structure of the laser modifications and reveal a complex distribution of defects. Electron energy loss spectroscopy (EELS) indicates that the majority of the irradiated region remains as $sp^3$ bonded diamond. Electrically-conductive paths are attributed to the formation of multiple nano-scale, $sp^2$-bonded graphitic wires and a network of strain-relieving micro-cracks.
△ Less
Submitted 11 August, 2017; v1 submitted 16 June, 2017;
originally announced June 2017.
-
Femtosecond laser inscription of Bragg grating waveguides in bulk diamond
Authors:
V. Bharadwaj,
A. Courvoisier,
T. T. Fernandez,
R. Ramponi,
G. Galzerano,
J. Nunn,
M. J. Booth,
R. Osellame,
S. M. Eaton,
P. S. Salter
Abstract:
Femtosecond laser writing is applied to form Bragg grating waveguides in the diamond bulk. Type II waveguides are integrated with a single pulse point-by-point periodic laser modification positioned towards the edge of the waveguide core. These photonic devices, operating in the telecommunications band, allow for simultaneous optical waveguiding and narrowband reflection from a 4th order grating.…
▽ More
Femtosecond laser writing is applied to form Bragg grating waveguides in the diamond bulk. Type II waveguides are integrated with a single pulse point-by-point periodic laser modification positioned towards the edge of the waveguide core. These photonic devices, operating in the telecommunications band, allow for simultaneous optical waveguiding and narrowband reflection from a 4th order grating. This fabrication technology opens the way towards advanced 3D photonic networks in diamond for a range of applications.
△ Less
Submitted 1 September, 2017; v1 submitted 29 May, 2017;
originally announced May 2017.
-
Four-dimensional light shaping: manipulating ultrafast spatio-temporal foci in space and time
Authors:
Bangshan Sun,
Patrick S. Salter,
Clemens Roider,
Alexander Jesacher,
Johannes Strauss,
Johannes Heberle,
Michael Schmidt,
Martin J. Booth
Abstract:
Spectral dispersion of ultrashort pulses allows simultaneous focusing of light in both space and time creating so-called spatio-temporal foci. Such space-time coupling may be combined with existing holographic techniques to give a further dimension of control when generating focal light fields. It is shown that a phase-only hologram placed in the pupil plane of an objective and illuminated by a sp…
▽ More
Spectral dispersion of ultrashort pulses allows simultaneous focusing of light in both space and time creating so-called spatio-temporal foci. Such space-time coupling may be combined with existing holographic techniques to give a further dimension of control when generating focal light fields. It is shown that a phase-only hologram placed in the pupil plane of an objective and illuminated by a spatially chirped ultrashort pulse can be used to generate three dimensional arrays of spatio-temporally focused spots. Exploiting the pulse front tilt generated at focus when applying simultaneous spatial and temporal focusing (SSTF), it is possible to overlap neighbouring foci in time to create a smooth intensity distribution. The resulting light field displays a high level of axial confinement, with experimental demonstrations given through two-photon microscopy and non-linear laser fabrication of glass.
△ Less
Submitted 15 May, 2017;
originally announced May 2017.
-
Laser writing of coherent colour centres in diamond
Authors:
Yu-Chen Chen,
Patrick S. Salter,
Sebastian Knauer,
Laiyi Weng,
Angelo C. Frangeskou,
Colin J. Stephen,
Philip R. Dolan,
Sam Johnson,
Ben L. Green,
Gavin W. Morley,
Mark E. Newton,
John G. Rarity,
Martin J. Booth,
Jason M. Smith
Abstract:
Optically active point defects in crystals have gained widespread attention as photonic systems that can find use in quantum information technologies. However challenges remain in the placing of individual defects at desired locations, an essential element of device fabrication. Here we report the controlled generation of single nitrogen-vacancy (NV) centres in diamond using laser writing. The use…
▽ More
Optically active point defects in crystals have gained widespread attention as photonic systems that can find use in quantum information technologies. However challenges remain in the placing of individual defects at desired locations, an essential element of device fabrication. Here we report the controlled generation of single nitrogen-vacancy (NV) centres in diamond using laser writing. The use of aberration correction in the writing optics allows precise positioning of vacancies within the diamond crystal, and subsequent annealing produces single NV centres with up to 45% success probability, within about 200 nm of the desired position. Selected NV centres fabricated by this method display stable, coherent optical transitions at cryogenic temperatures, a pre-requisite for the creation of distributed quantum networks of solid-state qubits. The results illustrate the potential of laser writing as a new tool for defect engineering in quantum technologies.
△ Less
Submitted 16 June, 2016;
originally announced June 2016.
-
Inscription of 3D waveguides in diamond using an ultrafast laser
Authors:
Arnaud Courvoisier,
Martin J. Booth,
Patrick S. Salter
Abstract:
Three dimensional waveguides within the bulk of diamond are manufactured using ultrafast laser fabrication. High intensities within the focal volume of the laser cause breakdown of the diamond into a graphitic phase leading to a stress induced refractive index change in neighboring regions. Type II waveguiding is thus enabled between two adjacent graphitic tracks, but supporting just a single pola…
▽ More
Three dimensional waveguides within the bulk of diamond are manufactured using ultrafast laser fabrication. High intensities within the focal volume of the laser cause breakdown of the diamond into a graphitic phase leading to a stress induced refractive index change in neighboring regions. Type II waveguiding is thus enabled between two adjacent graphitic tracks, but supporting just a single polarization state. We show that adaptive aberration correction during the laser processing allows the controlled fabrication of more complex structures beneath the surface of the diamond which can be used for 3D waveguide splitters and Type III waveguides which support both polarizations.
△ Less
Submitted 28 July, 2016; v1 submitted 1 June, 2016;
originally announced June 2016.
-
Development of integrated mode reformatting components for diffraction-limited spectroscopy
Authors:
D. G. MacLachlan,
R. J. Harris,
D. Choudhury,
R. D. Simmonds,
P. S. Salter,
M. J. Booth,
J. R. Allington-Smith,
R. R. Thomson
Abstract:
We present the results of our work on developing fully integrated devices (photonic dicers) for reformatting multimode light to a diffraction limited pseudo-slit. These devices can be used to couple a seeing-limited telescope point-spread-function to a spectrograph operating at the diffraction limit, thus enabling compact, high-resolution spectrographs that are free of modal-noise.
We present the results of our work on developing fully integrated devices (photonic dicers) for reformatting multimode light to a diffraction limited pseudo-slit. These devices can be used to couple a seeing-limited telescope point-spread-function to a spectrograph operating at the diffraction limit, thus enabling compact, high-resolution spectrographs that are free of modal-noise.
△ Less
Submitted 7 October, 2015;
originally announced October 2015.
-
Strain-optic active control for quantum integrated photonics
Authors:
Peter C. Humphreys,
Benjamin J. Metcalf,
Justin B. Spring,
Merritt Moore,
Patrick S. Salter,
Martin J. Booth,
W. Steven Kolthammer,
Ian A. Walmsley
Abstract:
We present a practical method for active phase control on a photonic chip that has immediate applications in quantum photonics. Our approach uses strain-optic modification of the refractive index of individual waveguides, effected by a millimeter-scale mechanical actuator. The resulting phase change of propagating optical fields is rapid and polarization-dependent, enabling quantum applications th…
▽ More
We present a practical method for active phase control on a photonic chip that has immediate applications in quantum photonics. Our approach uses strain-optic modification of the refractive index of individual waveguides, effected by a millimeter-scale mechanical actuator. The resulting phase change of propagating optical fields is rapid and polarization-dependent, enabling quantum applications that require active control and polarization encoding. We demonstrate strain-optic control of non-classical states of light in silica, showing the generation of 2-photon polarisation N00N states by manipulating Hong-Ou-Mandel interference. We also demonstrate switching times of a few microseconds, which are sufficient for silica-based feed-forward control of photonic quantum states.
△ Less
Submitted 21 November, 2014; v1 submitted 12 May, 2014;
originally announced May 2014.
-
On-chip low loss heralded source of pure single photons
Authors:
Justin B. Spring,
Patrick S. Salter,
Benjamin J. Metcalf,
Peter C. Humphreys,
Merritt Moore,
Nicholas Thomas-Peter,
Marco Barbieri,
Xian-Min Jin,
Nathan K. Langford,
W. Steven Kolthammer,
Martin J. Booth,
Ian A. Walmsley
Abstract:
A key obstacle to the experimental realization of many photonic quantum-enhanced technologies is the lack of low-loss sources of single photons in pure quantum states. We demonstrate a promising solution: generation of heralded single photons in a silica photonic chip by spontaneous four-wave mixing. A heralding efficiency of 40%, corresponding to a preparation efficiency of 80% accounting for det…
▽ More
A key obstacle to the experimental realization of many photonic quantum-enhanced technologies is the lack of low-loss sources of single photons in pure quantum states. We demonstrate a promising solution: generation of heralded single photons in a silica photonic chip by spontaneous four-wave mixing. A heralding efficiency of 40%, corresponding to a preparation efficiency of 80% accounting for detector performance, is achieved due to efficient coupling of the low-loss source to optical fibers. A single photon purity of 0.86 is measured from the source number statistics without filtering, and confirmed by direct measurement of the joint spectral intensity. We calculate that similar high-heralded-purity output can be obtained from visible to telecom spectral regions using this approach. On-chip silica sources can have immediate application in a wide range of single-photon quantum optics applications which employ silica photonics.
△ Less
Submitted 29 April, 2013;
originally announced April 2013.
