-
Modelling pyro-convection phenomenon during a mega-fire event in Portugal
Authors:
Cátia Campos,
Flavio Tiago Couto,
Jean-Baptiste Filippi,
Roberta Baggio,
Rui Salgado
Abstract:
The present study contributes to an increased understanding of pyro-convection phenomena by using a fire-atmosphere coupled simulation, and investigates in detail the large-scale meteorological conditions affecting Portugal during the occurrence of multiple mega-fires events on 15 October 2017. Two numerical simulations were performed using the MesoNH atmospheric model. The first simulation, was r…
▽ More
The present study contributes to an increased understanding of pyro-convection phenomena by using a fire-atmosphere coupled simulation, and investigates in detail the large-scale meteorological conditions affecting Portugal during the occurrence of multiple mega-fires events on 15 October 2017. Two numerical simulations were performed using the MesoNH atmospheric model. The first simulation, was run for a large single domain (300 x 250 grid points) with a 15 km resolution. In the second one, the MesoNH was coupled to a fire propagation model (ForeFire) to study in detail the Quiaios's fire. To optimize both high resolution in the proximity of the fire region and computational efficiency, the simulation is set up using 3 nested domains (300 x 300 grid points) with horizontal resolution of 2000 m, 400 m, and 80 m respectively. The emission into the atmosphere of the heat and the water vapour fluxes caused by the evolving fire is managed by the ForeFire code. The fire spatio-temporal evolution is based on an assigned map, which follows what reported by public authorities. At the large scale, the simulation shows the evolution of the hurricane Ophelia, pointing out the influence of south/southwest winds on the rapid spread of active fires, as well as the subtropical moisture transport toward mainland Portugal in the early evening, when violent pyro-convective activity was observed in Central Portugal. The coupled simulation allowed to reproduce the formation of a PyroCu cloud inside the smoke plume. The convective updraughts caused by the fire led to the vertical transport of water vapour to higher levels and enhanced the development of a high-based cloud over a dry atmospheric layer within the smoke plume.
△ Less
Submitted 25 October, 2023;
originally announced October 2023.
-
Synthesis and Properties of Non-Curing Graphene Thermal Interface Materials
Authors:
Sahar Naghibi,
Fariborz Kargar,
Dylan Wright,
Chun Yu Tammy Huang,
Amirmahdi Mohammadzadeh,
Zahra Barani,
Ruben Salgado,
Alexander Balandin
Abstract:
Development of the next generation thermal interface materials with high thermal conductivity is important for thermal management and packaging of electronic devices. We report on the synthesis and thermal conductivity measurements of non-curing thermal paste, i.e. grease, based on mineral oil with the mixture of graphene and few-layer graphene flakes as the fillers. It was found that graphene the…
▽ More
Development of the next generation thermal interface materials with high thermal conductivity is important for thermal management and packaging of electronic devices. We report on the synthesis and thermal conductivity measurements of non-curing thermal paste, i.e. grease, based on mineral oil with the mixture of graphene and few-layer graphene flakes as the fillers. It was found that graphene thermal paste exhibits a distinctive thermal percolation threshold with the thermal conductivity revealing a sublinear dependence on the filler loading. This behavior contrasts with the thermal conductivity of curing graphene thermal interface materials, based on epoxy, where super-linear dependence on the filler loading is observed. The performance of graphene thermal paste was benchmarked against top-of-the-line commercial thermal pastes. The obtained results show that non-curing graphene thermal interface materials outperforms the best commercial pastes in terms of thermal conductivity, at substantially lower filler concentration of ~ 27 vol%. The obtained results shed light on thermal percolation mechanism in non-curing polymeric matrices laden with quasi-two-dimensional fillers. Considering recent progress in graphene production via liquid phase exfoliation and oxide reduction, we argue that our results open a pathway for large-scale industrial application of graphene in thermal management of electronics.
△ Less
Submitted 23 November, 2019;
originally announced November 2019.
-
Ground/space, passive/active remote sensing observations coupled with particle dispersion modelling to understand the inter-continental transport of wildfire smoke plumes
Authors:
M. Sicard,
M. J. Granados-Munoz,
L. Alados-Arboledas,
R. Barragan,
A. E. Bedoya-Velasquez,
J. A. Benavent-Oltra,
D. Bortoli,
A. Comeron,
C. Cordoba-Jabonero,
M. J. Costa,
A. del Aguila,
A. J. Fernandez,
J. L. Guerrero-Rascado,
O. Jorba,
F. Molero,
C. Munoz-Porcar,
P. Ortiz-Amezcua,
N. Papagiannopoulos,
M. Potes,
M. Pujadas,
F. Rocadenbosch,
A. Rodriguez-Gomez,
R. Roman,
R. Salgado,
V. Salgueiro
, et al. (2 additional authors not shown)
Abstract:
During the 2017 record-breaking burning season in Canada / United States, intense wild fires raged during the first week of September in the Pacific northwestern region (British Columbia, Alberta, Washington, Oregon, Idaho, Montana and northern California) burning mostly temperate coniferous forests. The heavy loads of smoke particles emitted in the atmosphere reached the Iberian Peninsula (IP) a…
▽ More
During the 2017 record-breaking burning season in Canada / United States, intense wild fires raged during the first week of September in the Pacific northwestern region (British Columbia, Alberta, Washington, Oregon, Idaho, Montana and northern California) burning mostly temperate coniferous forests. The heavy loads of smoke particles emitted in the atmosphere reached the Iberian Peninsula (IP) a few days later on 7 and 8 September. Satellite imagery allows to identify two main smoke clouds emitted during two different periods that were injected and transported in the atmosphere at several altitude levels. Columnar properties on 7 and 8 September at two Aerosol Robotic Network (AERONET) mid-altitude, background sites in northern and southern Spain are: aerosol optical depth (AOD) at 440 nm up to 0.62, Angstrom exponent of 1.6-1.7, large dominance of small particles (fine mode fraction > 0.88), low absorption AOD at 440 nm (<0.008) and large single scattering albedo at 440 nm (>0.98). Profiles from the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) show the presence of smoke particles in the stratosphere during the transport, whereas the smoke is only observed in the troposphere at its arrival over the IP. Portuguese and Spanish ground lidar stations from the European Aerosol Research Lidar Network / Aerosols, Clouds, and Trace gases Research InfraStructure Network (EARLINET/ACTRIS) and the Micro-Pulse Lidar NETwork (MPLNET) reveal smoke plumes with different properties: particle depolarization ratio and color ratio, respectively, of 0.05 and 2.5 in the mid troposphere (5-9 km) and of 0.10 and 3.0 in the upper troposphere (10-13 km). In the mid troposphere the particle depolarization ratio does not seem time-dependent during the transport whereas the color ratio seems to increase (larger particles sediment first).
△ Less
Submitted 23 July, 2019;
originally announced July 2019.
-
Measurement of particle motion in optical tweezers embedded in a Sagnac interferometer
Authors:
Ivan Galinskiy,
Oscar Isaksson,
Israel Rebolledo Salgado,
Mathieu Hautefeuille,
Bernhard Mehlig,
Dag Hanstorp
Abstract:
We have constructed a counterpropagating optical tweezers setup embedded in a Sagnac interferometer in order to increase the sensitivity of position tracking for particles in the geometrical optics regime. Enhanced position determination using a Sagnac interferometer has previously been described theoretically by Taylor et al. [Journal of Optics 13, 044014 (2011)] for Rayleigh-regime particles tra…
▽ More
We have constructed a counterpropagating optical tweezers setup embedded in a Sagnac interferometer in order to increase the sensitivity of position tracking for particles in the geometrical optics regime. Enhanced position determination using a Sagnac interferometer has previously been described theoretically by Taylor et al. [Journal of Optics 13, 044014 (2011)] for Rayleigh-regime particles trapped in an antinode of a standing wave. We have extended their theory to a case of arbitrarily-sized particles trapped with orthogonally-polarized counterpropagating beams. The working distance of the setup was sufficiently long to optically induce particle oscillations orthogonally to the axis of the tweezers with an auxiliary laser beam. Using these oscillations as a reference, we have experimentally shown that Sagnac-enhanced back focal plane interferometry is capable of providing an improvement of more than 5 times in the signal-to-background ratio, corresponding to a more than 30-fold improvement of the signal-to-noise ratio. The experimental results obtained are consistent with our theoretical predictions. In the experimental setup, we used a method of optical levitator-assisted liquid droplet delivery in air based on commercial inkjet technology, with a novel method to precisely control the size of droplets.
△ Less
Submitted 8 October, 2015; v1 submitted 19 July, 2015;
originally announced July 2015.
-
Relativity on Rotated Graph Paper
Authors:
Roberto B. Salgado
Abstract:
We present visual calculations in special relativity using spacetime diagrams drawn on graph paper that has been rotated by 45 degrees. The rotated lines represent lightlike directions in Minkowski spacetime, and the boxes in the grid (called "light-clock diamonds") represent units of measurement modeled on the ticks of an inertial observer's lightclock. We show that many quantitative results can…
▽ More
We present visual calculations in special relativity using spacetime diagrams drawn on graph paper that has been rotated by 45 degrees. The rotated lines represent lightlike directions in Minkowski spacetime, and the boxes in the grid (called "light-clock diamonds") represent units of measurement modeled on the ticks of an inertial observer's lightclock. We show that many quantitative results can be read off a spacetime diagram by counting boxes, using a minimal amount of algebra. We use the Doppler Effect, in the spirit of the Bondi k-calculus, to motivate the method.
△ Less
Submitted 30 November, 2011;
originally announced November 2011.
-
Visualizing proper-time in Special Relativity
Authors:
Roberto B. Salgado
Abstract:
We present a new visualization of the proper-time elapsed along an observer's worldline. By supplementing worldlines with light clocks, the measurement of space-time intervals is reduced to the "counting of ticks." The resulting space-time diagrams are pedagogically attractive because they emphasize the relativistic view that "time is what is measured by an observer's clock."
We present a new visualization of the proper-time elapsed along an observer's worldline. By supplementing worldlines with light clocks, the measurement of space-time intervals is reduced to the "counting of ticks." The resulting space-time diagrams are pedagogically attractive because they emphasize the relativistic view that "time is what is measured by an observer's clock."
△ Less
Submitted 19 May, 2005;
originally announced May 2005.
