Showing 1–50 of 87 results for author: Salez, T

Surface mobility of a glass-forming polymer in an ionic liquid

Authors: Xinyu Zhang, Christian Pedersen, Haoqi Zhu, Siming Wang, Yuchen Fu, Liang Dai, Andreas Carlson, Thomas Salez, Yu Chai

Abstract: The free surface of glassy polymers exhibits enhanced segmental dynamics compared to the bulk, forming a liquid-like layer that lowers the glass transition temperature (Tg) in nanometersized polymer samples. Recent studies have shown that immersing polymers in ionic liquids can suppress this enhanced surface dynamics. To investigate how ionic liquids influence polymer dynamics near the ionic-liqui… ▽ More The free surface of glassy polymers exhibits enhanced segmental dynamics compared to the bulk, forming a liquid-like layer that lowers the glass transition temperature (Tg) in nanometersized polymer samples. Recent studies have shown that immersing polymers in ionic liquids can suppress this enhanced surface dynamics. To investigate how ionic liquids influence polymer dynamics near the ionic-liquid-polymer interface, we measure the surface leveling of nanometersized stepped polystyrene films immersed in ionic liquids, and compared the results to the case of films in vacuum. Our results reveal that ionic liquids significantly slow the leveling process both above and below Tg. However, our results indicate that the liquid-like surface layer below Tg does exist in ionic liquids. Numerical solutions of the thin-film equation, incorporating appropriate boundary conditions, show that the surface mobility of PS films in ionic liquids can match that of PS films in vacuum. Thus, while ionic liquids alter the polymer flow process, they do not eliminate the dynamical heterogeneity inherent to glassy polymers. △ Less

Submitted 9 May, 2025; originally announced May 2025.

Enhanced diffusion over a periodic trap by hydrodynamic coupling to an elastic mode

Authors: Juliette Lacherez, Maxime Lavaud, Yacine Amarouchene, David S. Dean, Thomas Salez

Abstract: In many physical systems, degrees of freedom are coupled \emph{via} hydrodynamic forces, even in the absence of Hamiltonian interactions. A particularly important and widespread example concerns the transport of microscopic particles in fluids near deformable boundaries. In such a situation, the influence of elastohydrodynamic couplings on Brownian motion remains to be understood. Unfortunately, t… ▽ More In many physical systems, degrees of freedom are coupled \emph{via} hydrodynamic forces, even in the absence of Hamiltonian interactions. A particularly important and widespread example concerns the transport of microscopic particles in fluids near deformable boundaries. In such a situation, the influence of elastohydrodynamic couplings on Brownian motion remains to be understood. Unfortunately, the temporal and spatial scales associated with the thermal fluctuations of usual surfaces are often so small that their deformations are difficult to monitor experimentally, together with the much slower and larger particle motion at stake. Here, we propose a minimal model describing the hydrodynamic coupling of a colloidal particle to a fluctuating elastic mode, in presence of an external periodic potential. We demonstrate that the late-time diffusion coefficient of the particle increases with the compliance of the elastic mode. Remarkably, our results reveal that, and quantify how: i) spontaneous microscopic transport in complex environnements can be affected by soft boundaries -- a situation with numerous practical implications in nanoscale and biological physics; ii) the effects of fast and tiny surface deformations are imprinted over the long-term and large-distance colloidal mobility -- and are hence measurable in practice. △ Less

Submitted 10 February, 2025; originally announced February 2025.

The Soft-Membrane Surface Forces Apparatus

Authors: Ilyes Jalisse, Aditya Jha, Lionel Buisson, Frédéric Nallet, Yacine Amarouchene, Thomas Salez, Carlos Drummond

Abstract: Compliant walls are widespread in biological and engineering systems. Because of their singular nature, adapted tools are required to accurately study their rheological properties as well as the consequences of the latter within a given mechanical setting. Because of their slender nature, membranes can be considered as prototypical examples of highly compliant boundaries. In this study, we describ… ▽ More Compliant walls are widespread in biological and engineering systems. Because of their singular nature, adapted tools are required to accurately study their rheological properties as well as the consequences of the latter within a given mechanical setting. Because of their slender nature, membranes can be considered as prototypical examples of highly compliant boundaries. In this study, we describe a modified Surface Forces Apparatus (SFA) developed to measure the forces acting on a compliant membrane by measuring its deformation field. We discuss how such a device can be used to characterize the rheology of suspended membranes and accurately measure the electrostatic interactions between a polarized membrane and a spherical electrode, without the need of an external measurement spring. △ Less

Submitted 18 December, 2024; originally announced December 2024.

Bidirectional Mamba state-space model for anomalous diffusion

Authors: Maxime Lavaud, Yosef Shokeeb, Juliette Lacherez, Yacine Amarouchene, Thomas Salez

Abstract: Characterizing anomalous diffusion is crucial in order to understand the evolution of complex stochastic systems, from molecular interactions to cellular dynamics. In this work, we characterize the performances regarding such a task of Bi-Mamba, a novel state-space deep-learning architecture articulated with a bidirectional scan mechanism. Our implementation is tested on the AnDi-2 challenge datas… ▽ More Characterizing anomalous diffusion is crucial in order to understand the evolution of complex stochastic systems, from molecular interactions to cellular dynamics. In this work, we characterize the performances regarding such a task of Bi-Mamba, a novel state-space deep-learning architecture articulated with a bidirectional scan mechanism. Our implementation is tested on the AnDi-2 challenge datasets among others. Designed for regression tasks, the Bi-Mamba architecture infers efficiently the effective diffusion coefficient and anomalous exponent from single, short trajectories. As such, our results indicate the potential practical use of the Bi-Mamba architecture for anomalousdiffusion characterization. △ Less

Submitted 10 December, 2024; originally announced December 2024.

Taylor's swimming sheet near a soft boundary

Authors: Aditya Jha, Yacine Amarouchene, Thomas Salez

Abstract: In 1951, G.I. Taylor modeled swimming microorganisms by hypothesizing an infinite sheet in 2D moving in a viscous medium due to a wave passing through it. This simple model not only captured the ability of microorganisms to swim due to the wavy motion of a flagella, but further development into the model captured the optimal nature of metachronal waves observed in ciliates. While the additional ef… ▽ More In 1951, G.I. Taylor modeled swimming microorganisms by hypothesizing an infinite sheet in 2D moving in a viscous medium due to a wave passing through it. This simple model not only captured the ability of microorganisms to swim due to the wavy motion of a flagella, but further development into the model captured the optimal nature of metachronal waves observed in ciliates. While the additional effects of nearby rigid boundaries and complex environments have been addressed, herein we explore the correction induced by a nearby soft boundary. Our simple model allows us to show that the magnitude of the swimming velocity gets modified near soft boundaries, and reduces for transverse waves while it increases for longitudinal waves. We further delve into the energetics of the process and the deformation of the corresponding soft boundary, highlighting the synchronization of the oscillations induced on the soft boundary with the waves passing through the sheet and the corresponding changes to the power exerted on the fluid. △ Less

Submitted 3 October, 2024; originally announced October 2024.

Capillary lubrication of a spherical particle near a fluid interface

Authors: Aditya Jha, Yacine Amarouchene, Thomas Salez

Abstract: The lubricated motion of an object near a deformable boundary presents striking subtleties arising from the coupling between the elasticity of the boundary and lubricated flow, including but not limited to the emergence of a lift force acting on the object despite the zero Reynolds number. In this study, we characterize the hydrodynamic forces and torques felt by a sphere translating in close prox… ▽ More The lubricated motion of an object near a deformable boundary presents striking subtleties arising from the coupling between the elasticity of the boundary and lubricated flow, including but not limited to the emergence of a lift force acting on the object despite the zero Reynolds number. In this study, we characterize the hydrodynamic forces and torques felt by a sphere translating in close proximity to a fluid interface, separating the viscous medium of the sphere's motion from an infinitely-more-viscous medium. We employ lubrication theory and perform a perturbation analysis in capillary compliance. The dominant response of the interface owing to surface tension results in a long-ranged interface deformation, which leads to a modification of the forces and torques with respect to the rigid reference case, that we characterise in details with scaling arguments and numerical integrations. △ Less

Submitted 18 July, 2024; originally announced July 2024.

Journal ref: J. Fluid Mech. 1001 (2024) A58

Singular viscoelastic perturbation to soft lubrication

Authors: Bharti Bharti, Quentin Ferreira, Aditya Jha, Andreas Carlson, David S. Dean, Yacine Amarouchene, Tak Shing Chan, Thomas Salez

Abstract: Soft lubrication has been shown to drastically affect the mobility of an object immersed in a viscous fluid in the vicinity of a purely elastic wall. In this theoretical study, we develop a minimal model incorporating viscoelasticity, carrying out a perturbation analysis in both the elastic deformation of the wall and its viscous damping. Our approach reveals the singular-perturbation nature of… ▽ More Soft lubrication has been shown to drastically affect the mobility of an object immersed in a viscous fluid in the vicinity of a purely elastic wall. In this theoretical study, we develop a minimal model incorporating viscoelasticity, carrying out a perturbation analysis in both the elastic deformation of the wall and its viscous damping. Our approach reveals the singular-perturbation nature of viscoelasticity to soft lubrication. Numerical resolution of the resulting non-linear, singular and coupled equations of motion reveals peculiar effects of viscoelasticity on confined colloidal mobility, opening the way towards the description of complex migration scenarios near realistic polymeric substrates and biological membranes. △ Less

Submitted 5 July, 2024; originally announced July 2024.

Tuning the water intrinsic permeability of PEGDA hydrogel membranes by adding free PEG chains of varying molar masses

Authors: Malak Alaa Eddine, Alain Carvalho, M. Schmutz, Thomas Salez, Sixtine de Chateauneuf-Randon, Bruno Bresson, Nadège Pantoustier, C. Monteux, S. Belbekhouche

Abstract: We explore the effect of poly (ethylene glycol) (PEG) molar mass on the intrinsic permeability and structural characteristics of poly (ethylene glycol) diacrylate PEGDA/PEG composite hydrogel membranes. We observe that by varying the PEG content and molar mass, we can finely adjust the water intrinsic permeability over several orders of magnitude. Notably, we show the existence of a maximum water… ▽ More We explore the effect of poly (ethylene glycol) (PEG) molar mass on the intrinsic permeability and structural characteristics of poly (ethylene glycol) diacrylate PEGDA/PEG composite hydrogel membranes. We observe that by varying the PEG content and molar mass, we can finely adjust the water intrinsic permeability over several orders of magnitude. Notably, we show the existence of a maximum water intrinsic permeability, already identified in a previous study to be located at the critical overlap concentration C^* of PEG chains, for the highest PEG molar mass studied. Furthermore, we note that the maximum intrinsic permeability follows a non-monotonic evolution with respect to the PEG molar mass and reaches its peak at 35 000 g.mol-1. Besides our results show that a significant fraction of PEG chains is irreversibly trapped within the PEGDA matrix even for the shortest molar masses down to 600 g.mol-1. This observation suggests the possibility of covalent grafting of PEG chains to the PEGDA matrix. CryoSEM and AFM measurements demonstrate the presence of large micron-sized cavities separated by PEGDA-rich walls whose nanometric structure strongly depends on the PEG content. By combining our permeability and structural measurements, we suggest that the PEG chains trapped inside the PEGDA rich walls induce nanoscale defects in the cross linking density, resulting in an increased permeability below C^*. Conversely, above C^*, we speculate that partially-trapped PEG chains may form a brush-like arrangement on the surface of the PEGDA-rich walls, leading to a reduction in permeability. These two opposing effects are anticipated to exhibit molar-mass-dependent trends, contributing to the non-monotonic variation of the maximum intrinsic permeability at C^*. Overall, our results demonstrate the potential to fine-tune the properties of hydrogel membranes, offering new opportunities in separation applications. △ Less

Submitted 10 June, 2024; originally announced June 2024.

Journal ref: Soft Matter, 2024

Observation of Brownian elastohydrodynamic forces acting on confined soft colloids

Authors: Nicolas Fares, Maxime Lavaud, Zaicheng Zhang, Aditya Jha, Yacine Amarouchene, Thomas Salez

Abstract: Confined motions in complex environments are ubiquitous in microbiology. These situations invariably involve the intricate coupling between fluid flow, soft boundaries, surface forces and fluctuations. In the present study, such a coupling is investigated using a novel method combining holographic microscopy and advanced statistical inference. Specifically, the Brownian motion of softmicrometric o… ▽ More Confined motions in complex environments are ubiquitous in microbiology. These situations invariably involve the intricate coupling between fluid flow, soft boundaries, surface forces and fluctuations. In the present study, such a coupling is investigated using a novel method combining holographic microscopy and advanced statistical inference. Specifically, the Brownian motion of softmicrometric oil droplets near rigid walls is quantitatively analyzed. All the key statistical observables are reconstructed with high precision, allowing for nanoscale resolution of local mobilities and femtonewton inference of conservative or non-conservative forces. Strikingly, the analysis reveals the existence of a novel, transient, but large, soft Brownian force. The latter might be of crucial importance for microbiological and nanophysical transport, target finding or chemical reactions in crowded environments, and hence the whole life machinery. △ Less

Submitted 22 May, 2024; originally announced May 2024.

Capillary-lubrication force between rotating cylinders separated by a fluid interface

Authors: Aditya Jha, Yacine Amarouchene, Thomas Salez

Abstract: Two cylinders rotating next to each other generate a large hydrodynamic force if the intermediate space is filled with a viscous fluid. Herein, we explore the case where the cylinders are separated by two layers of viscous immiscible fluids, in the limit of small capillary deformation of the fluid interface. As the interface deformation breaks the system's symmetry, a novel force characteristic of… ▽ More Two cylinders rotating next to each other generate a large hydrodynamic force if the intermediate space is filled with a viscous fluid. Herein, we explore the case where the cylinders are separated by two layers of viscous immiscible fluids, in the limit of small capillary deformation of the fluid interface. As the interface deformation breaks the system's symmetry, a novel force characteristic of soft lubrication is generated. We calculate this capillary-lubrication force, which is split into velocity-dependant and acceleration-dependant contributions. Furthermore, we analyze the variations induced by modifying the viscosity ratio between the two fluid layers, their thickness ratio, and the Bond number. Unlike standard elastic cases, where a repelling soft-lubrication lift force has been abundantly reported, the current fluid bilayer setting can also exhibit an attractive force due to the non-monotonic deflection of the fluid interface when varying the sublayer thickness. Besides, at high Bond numbers, the system's response becomes analogous to the one of a Winkler-like substrate with a viscous flow inside. △ Less

Submitted 28 March, 2024; originally announced March 2024.

Comments: arXiv admin note: text overlap with arXiv:2307.00013

Plateau-Rayleigh instability of a viscous film on a soft fiber

Authors: Bharti Bharti, Andreas Carlson, Tak Shing Chan, Thomas Salez

Abstract: We theoretically study the Plateau-Rayleigh instability of a thin viscous film covering a fiber consisting of a rigid cylindrical core coated with a thin compressible elastic layer. We develop a soft-lubrication model, combining the capillary-driven flow in the viscous film to the elastic deformation of the soft coating, within the Winkler-foundation framework. We perform a linear-stability analys… ▽ More We theoretically study the Plateau-Rayleigh instability of a thin viscous film covering a fiber consisting of a rigid cylindrical core coated with a thin compressible elastic layer. We develop a soft-lubrication model, combining the capillary-driven flow in the viscous film to the elastic deformation of the soft coating, within the Winkler-foundation framework. We perform a linear-stability analysis and derive the dispersion relation. We find that the growth rate is larger when the soft coating is more compliant. As such, softness acts as a destabilising factor. In contrast, increasing the thickness of the soft coating reduces the growth rate, due to the dominating geometrical effect. △ Less

Submitted 19 December, 2023; originally announced December 2023.

Coalescence of elastic blisters filled with a viscous fluid

Authors: Torstein Sæter, Christian Pedersen, Jacco H. Snoeijer, Thomas Salez, Andreas Carlson

Abstract: Pockets of viscous fluid coalescing beneath an elastic plate are encountered in a wide range of natural phenomena and engineering processes, spanning across scales. As the pockets merge, a bridge is formed with a height increasing as the plate relaxes. We study the spatiotemporal dynamics of such an elasto-hydrodynamic coalescence process by combining experiments, lubrication theory and numerical… ▽ More Pockets of viscous fluid coalescing beneath an elastic plate are encountered in a wide range of natural phenomena and engineering processes, spanning across scales. As the pockets merge, a bridge is formed with a height increasing as the plate relaxes. We study the spatiotemporal dynamics of such an elasto-hydrodynamic coalescence process by combining experiments, lubrication theory and numerical simulations. The bridge height exhibits an exponential growth with time, which corresponds to a self-similar solution of the bending-driven thin-film equation. We address this unique self-similarity and the self-similar shape of the bridge, both of which are corroborated in numerical simulations and experiments. △ Less

Submitted 3 August, 2023; originally announced August 2023.

Journal ref: Phys. Rev. Lett. 132, 074001 (2024)

Unsteady drag force on an immersed sphere oscillating near a wall

Authors: Zaicheng Zhang, Vincent Bertin, Martin Essink, Hao Zhang, Nicolas Fares, Zaiyi Shen, Thomas Bickel, Thomas Salez, Abdelhamid Maali

Abstract: The unsteady hydrodynamic drag exerted on an oscillating sphere near a planar wall is addressed experimentally, theoretically, and numerically. The experiments are performed by using colloidal-probe Atomic Force Microscopy (AFM) in thermal noise mode. The natural resonance frequencies and quality factors are extracted from the measurement of the power spectrum density of the probe oscillation for… ▽ More The unsteady hydrodynamic drag exerted on an oscillating sphere near a planar wall is addressed experimentally, theoretically, and numerically. The experiments are performed by using colloidal-probe Atomic Force Microscopy (AFM) in thermal noise mode. The natural resonance frequencies and quality factors are extracted from the measurement of the power spectrum density of the probe oscillation for a broad range of gap distances and Womersley numbers. The shift in the natural resonance frequency of the colloidal probe as the probe goes close to a solid wall infers the wall-induced variations of the effective mass of the probe. Interestingly, a crossover from a positive to a negative shift is observed as the Womersley number increases. In order to rationalize the results, the confined unsteady Stokes equation is solved numerically using a finite-element method, as well as asymptotic calculations.The in-phase and out-of-phase terms of the hydrodynamic drag acting on the sphere are obtained and agree well to the experimental results. All together, the experimental, theoretical, and numerical results show that the hydrodynamic force felt by an immersed sphere oscillating near a wall is highly dependent on the Womersley number. △ Less

Submitted 12 July, 2023; originally announced July 2023.

Capillary-lubrication force exerted on a 2D particle moving towards a fluid interface

Authors: Aditya Jha, Yacine Amarouchene, Thomas Salez

Abstract: A rigid object moving in a viscous fluid and in close proximity with an elastic wall experiences self-generated elastohydrodynamic interactions. This has been the subject of an intense research activity, with a recent and growing attention given to the particular case of elastomeric and gel-like substrates. Here, we address the situation where the elastic wall is replaced by a capillary surface. S… ▽ More A rigid object moving in a viscous fluid and in close proximity with an elastic wall experiences self-generated elastohydrodynamic interactions. This has been the subject of an intense research activity, with a recent and growing attention given to the particular case of elastomeric and gel-like substrates. Here, we address the situation where the elastic wall is replaced by a capillary surface. Specifically, we analyze the lubrication flow generated by the prescribed normal motion of a rigid infinite cylinder near the deformable interface separating two immiscible and incompressible viscous fluids. Using a combination of analytical and numerical treatments, we compute the emergent capillary-lubrication force at leading order in compliance, and characterize its dependencies with the interfacial tension, viscosities of the fluids, and length scales of the problem. Interestingly, we identify two main contributions: i) a velocity-dependent adhesion-like force ; ii) an acceleration-dependant inertial-like force. Our results may have implications for the mobility of colloids near complex interfaces and for the motility of confined microbiological entities. △ Less

Submitted 22 June, 2023; originally announced July 2023.

Instability and rupture of sheared viscous liquid nanofilms

Authors: Vira Dhaliwal, Christian Pedersen, Kheireddine Kadri, Guillaume Miquelard-Garnier, Cyrille Sollogoub, Jorge Peixinho, Thomas Salez, Andreas Carlson

Abstract: Liquid nanofilms are ubiquitous in nature and technology, and their equilibrium and out-of-equilibrium dynamics are key to a multitude of phenomena and processes. We numerically study the evolution and rupture of viscous nanometric films, incorporating the effects of surface tension, van der waals forces, thermal fluctuations and viscous shear. We show that thermal fluctuations create perturbation… ▽ More Liquid nanofilms are ubiquitous in nature and technology, and their equilibrium and out-of-equilibrium dynamics are key to a multitude of phenomena and processes. We numerically study the evolution and rupture of viscous nanometric films, incorporating the effects of surface tension, van der waals forces, thermal fluctuations and viscous shear. We show that thermal fluctuations create perturbations that can trigger film rupture, but they do not significantly affect the growth rate of the perturbations. The film rupture time can be predicted from a linear stability analysis of the governing thin film equation, by considering the most unstable wavelength and the thermal roughness. Furthermore, applying a sufficiently large unidirectional shear can stabilise large perturbations, creating a finite-amplitude travelling wave instead of film rupture. In contrast, in three dimensions, unidirectional shear does not inhibit rupture, as perturbations are not suppressed in the direction perpendicular to the applied shear. However, if the direction of shear varies in time, the growth of large perturbations is prevented in all directions, and rupture can hence be impeded. △ Less

Submitted 27 June, 2023; v1 submitted 26 June, 2023; originally announced June 2023.

Journal ref: Physical Review Fluids 9 024201 (2024)

Mechanical response of a thick poroelastic gel in contactless colloidal-probe rheology

Authors: Caroline Kopecz-Muller, Vincent Bertin, Elie Raphael, Joshua D Mcgraw, Thomas Salez

Abstract: When a rigid object approaches a soft material in a viscous fluid, hydrodynamic stresses arise in the lubricated contact region and deform the soft material. The elastic deformation modifies in turn the flow, hence generating a soft-lubrication coupling. Moreover, soft elastomers and gels are often porous. These materials may be filled with solvent or uncrosslinked polymer chains, and might be per… ▽ More When a rigid object approaches a soft material in a viscous fluid, hydrodynamic stresses arise in the lubricated contact region and deform the soft material. The elastic deformation modifies in turn the flow, hence generating a soft-lubrication coupling. Moreover, soft elastomers and gels are often porous. These materials may be filled with solvent or uncrosslinked polymer chains, and might be permeable to the surrounding fluid, which complexifies further the description. Here, we derive the point-force response of a semi-infinite and permeable poroelastic substrate. Then, we use this fundamental solution in order to address the specific poroelastic lubrication coupling associated with contactless colloidal-probe methods. In particular, we derive the conservative and dissipative components of the force associated with the oscillating vertical motion of a sphere close to the poroelastic substrate. Our results may be relevant for dynamic surface force apparatus and contactless colloidal-probe atomic force microscopy experiments on soft, living and/or fragile materials, such as swollen hydrogels and biological membranes. △ Less

Submitted 12 December, 2022; originally announced December 2022.

On the bridge hypothesis in the glass transition of freestanding polymer films

Authors: Haggai Bonneau, Maxence Arutkin, Rainni Chen, James A Forrest, Elie Raphael, Thomas Salez

Abstract: Freestanding thin polymer films with high molecular weights exhibit an anomalous decrease in the glass-transition temperature with film thickness. Specifically, in such materials, the measured glass-transition temperature evolves in an affine way with the film thickness, with a slope that weakly depends on the molecular weight. De Gennes proposed a sliding mechanism as the hypothetical dominant re… ▽ More Freestanding thin polymer films with high molecular weights exhibit an anomalous decrease in the glass-transition temperature with film thickness. Specifically, in such materials, the measured glass-transition temperature evolves in an affine way with the film thickness, with a slope that weakly depends on the molecular weight. De Gennes proposed a sliding mechanism as the hypothetical dominant relaxation process in these systems, where stress kinks could propagate in a reptation-like fashion through so called bridges, i.e. from one free interface to the other along the backbones of polymer macromolecules. Here, by considering the exact statistics of finite-sized random walks within a confined box, we investigate in details the bridge hypothesis. We show that the sliding mechanism cannot reproduce the basic features appearing in the experiments, and we exhibit the fundamental reasons behind such a fact. △ Less

Submitted 8 December, 2022; originally announced December 2022.

Surface and Bulk Relaxation of Vapour-Deposited Polystyrene Glasses

Authors: Junjie Yin, Christian Pedersen, Michael Thees, Andreas Carlson, Thomas Salez, James A Forrest

Abstract: We have studied the liquid-like response of the surface of vapour-deposited glassy films of polystyrene to the introduction of gold nanoparticles on the surface. The build-up of polymer material was measured as a function of time and temperature for both as-deposited films, as well as films that have been rejuvenated to become normal glasses cooled from the equilibrium liquid. The temporal evolut… ▽ More We have studied the liquid-like response of the surface of vapour-deposited glassy films of polystyrene to the introduction of gold nanoparticles on the surface. The build-up of polymer material was measured as a function of time and temperature for both as-deposited films, as well as films that have been rejuvenated to become normal glasses cooled from the equilibrium liquid. The temporal evolution of the surface profile is well described by the characteristic power law of capillary-driven surface flows. In all cases, the surface evolution of the as-deposited films and the rejuvenated films are enhanced compared to bulk and are not easily distinguishable from each other. The temperature dependence of the measured relaxation times determined from the surface evolution is found to be quantitatively comparable to similar studies for high molecular weight spincast polystyrene. Comparisons to numerical solutions of the glassy thin film equation provide quantitative estimates of the surface mobility. For temperatures sufficiently close to the glass-transition temperature, particle embedding is also measured and used as a probe of bulk dynamics, and in particular bulk viscosity. △ Less

Submitted 9 November, 2022; originally announced November 2022.

Numerical simulations of confined Brownian-yet-non-Gaussian motion

Authors: Elodie Millan, Maxime Lavaud, Yacine Amarouchene, Thomas Salez

Abstract: Brownian motion is a central scientific paradigm. Recently, due to increasing efforts and interests towards miniaturization and small-scale physics or biology, the effects of confinement on such a motion have become a key topic of investigation. Essentially, when confined near a wall, a particle moves much slower than in the bulk due to friction at the boundaries. The mobility is therefore locally… ▽ More Brownian motion is a central scientific paradigm. Recently, due to increasing efforts and interests towards miniaturization and small-scale physics or biology, the effects of confinement on such a motion have become a key topic of investigation. Essentially, when confined near a wall, a particle moves much slower than in the bulk due to friction at the boundaries. The mobility is therefore locally hindered and space-dependent, which in turn leads to the apparition of so-called multiplicative noises, and associated non-Gaussianities which remain difficult to resolve at all times. Here, we exploit simple, optimized and efficient numerical simulations to address Brownian motion in confinement in a broadrange and quantitative way. To do so, we integrate the overdamped Langevin equation governing the thermal dynamics of a negatively-buoyant single spherical colloid within a viscous fluid confined by two rigid walls, including surface charges. From the produced large set of long random trajectories, we perform a complete statistical analysis and extract all the key quantities, such as the probability distributions in displacements and their main moments. In particular, we propose a novel method to compute high-order cumulants by reducing convergence problems, and employ it to efficiently characterize the inherent non-Gaussianity of the confined process. △ Less

Submitted 10 March, 2023; v1 submitted 28 October, 2022; originally announced October 2022.

Large and non-linear permeability amplification with polymeric additives in hydrogel membranes

Authors: Malak Alaa Eddine, S. Belbekhouche, Sixtine de Chateauneuf-Randon, Thomas Salez, Artem Kovalenko, Bruno Bresson, C. Monteux

Abstract: Hydrogels which are hydrophilic and porous materials have recently emerged as promising systems for filtration applications. In our study, we prepare hydrogel membranes by the photopolymerization of a mixture of poly (ethylene glycol) diacrylate (PEGDA) and large poly(ethylene glycol) (PEG) chains of 300 000 g.mol-1 in the presence of a photoinitiator. We find that this addition of free PEG chains… ▽ More Hydrogels which are hydrophilic and porous materials have recently emerged as promising systems for filtration applications. In our study, we prepare hydrogel membranes by the photopolymerization of a mixture of poly (ethylene glycol) diacrylate (PEGDA) and large poly(ethylene glycol) (PEG) chains of 300 000 g.mol-1 in the presence of a photoinitiator. We find that this addition of free PEG chains induces a large and non-linear increase of the water permeability. Indeed, by changing the content of PEG chains added, we obtain variations of the hydrogel water permeability over two orders of magnitude. The highest water permeability values are obtained for the membranes when the PEG concentration is equal to its critical overlap concentration C*. Moreover, we find that the flow rate of water through the membranes varies non-linearly with the pressure. We relate this result to the deformability of the membranes as the applied pressure leads to a compression of the pores. This study provides new perspectives for the design of flexible hydrogel membranes with controlled permeability and their application in water treatment and bioseparation. △ Less

Submitted 2 September, 2022; originally announced September 2022.

Near-critical spreading of droplets

Authors: Raphael Saiseau, Christian Pedersen, Anwar Benjana, Andreas Carlson, Ulysse Delabre, Thomas Salez, Jean-Pierre Delville

Abstract: We study the spreading of droplets in a near-critical phase-separated liquid mixture, using a combination of experiments, lubrication theory and finite-element numerical simulations. The classical Tanner's law describing the spreading of viscous droplets is robustly verified when the critical temperature is neared. Furthermore, the microscopic cut-off length scale emerging in this law is obtained… ▽ More We study the spreading of droplets in a near-critical phase-separated liquid mixture, using a combination of experiments, lubrication theory and finite-element numerical simulations. The classical Tanner's law describing the spreading of viscous droplets is robustly verified when the critical temperature is neared. Furthermore, the microscopic cut-off length scale emerging in this law is obtained as a single free parameter for each given temperature. In total-wetting conditions, this length is interpreted as the thickness of the thin precursor film present ahead of the apparent contact line. The collapse of the different evolutions onto a single Tanner-like master curve demonstrates the universality of viscous spreading before entering in the fluctuation-dominated regime. Finally, our results reveal a counter-intuitive and sharp thinning of the precursor film when approaching the critical temperature, which is attributed to the vanishing spreading parameter at the critical point. △ Less

Submitted 7 October, 2022; v1 submitted 28 July, 2022; originally announced July 2022.

Journal ref: Nature Communications, 13 7442 (2022)

Lift at low Reynolds number

Authors: Lionel Bureau, Gwennou Coupier, Thomas Salez

Abstract: Lift forces are widespread in hydrodynamics. These are typically observed for big and fast objects, and are often associated with a combination of fluid inertia (i.e. large Reynolds numbers) and specific symmetry-breaking mechanisms. In contrast, the properties of viscosity-dominated (i.e. low Reynolds numbers) flows make it more difficult for such lift forces to emerge. However, the inclusion of… ▽ More Lift forces are widespread in hydrodynamics. These are typically observed for big and fast objects, and are often associated with a combination of fluid inertia (i.e. large Reynolds numbers) and specific symmetry-breaking mechanisms. In contrast, the properties of viscosity-dominated (i.e. low Reynolds numbers) flows make it more difficult for such lift forces to emerge. However, the inclusion of boundary effects qualitatively changes this picture. Indeed, in the context of soft and biological matter, recent studies have revealed the emergence of novel lift forces generated by boundary softness, flow gradients and/or surface charges. The aim of the present review is to gather and analyse this corpus of literature, in order to identify and unify the questioning within the associated communities, and pave the way towards future research. △ Less

Submitted 9 November, 2023; v1 submitted 10 July, 2022; originally announced July 2022.

Journal ref: The European Physical Journal E 46 111 (2023)

Non-Gaussian diffusion near surfaces

Authors: Arthur Alexandre, Maxime Lavaud, Nicolas Fares, Elodie Millan, Yann Louyer, Thomas Salez, Yacine Amarouchene, Thomas Guérin, David S. Dean

Abstract: We study the diffusion of particles confined close to a single wall and in double-wall planar channel geometries where the local diffusivities depend on the distance to the boundaries. Displacement parallel to the walls is Brownian as characterized by its variance, but it is non-Gaussian having a non-zero fourth cumulant. Establishing a link with Taylor dispersion, we calculate the fourth cumul… ▽ More We study the diffusion of particles confined close to a single wall and in double-wall planar channel geometries where the local diffusivities depend on the distance to the boundaries. Displacement parallel to the walls is Brownian as characterized by its variance, but it is non-Gaussian having a non-zero fourth cumulant. Establishing a link with Taylor dispersion, we calculate the fourth cumulant and the tails of the displacement distribution for general diffusivity tensors along with potentials generated by either the walls or externally, for instance gravity. Experimental and numerical studies of the motion of a colloid in the direction parallel to the wall give measured fourth cumulants which are correctly predicted by our theory. Interestingly, contrary to models of Brownian-yet-non-Gaussian diffusion, the tails of the displacement distribution are shown to be Gaussian rather than exponential. All together, our results provide additional tests and constraints for the inference of force maps and local transport properties near surfaces. △ Less

Submitted 19 December, 2022; v1 submitted 5 July, 2022; originally announced July 2022.

Nanoparticle Taylor dispersion near charged surfaces with an open boundary

Authors: Alexandre Vilquin, Vincent Bertin, Elie Raphaël, David S Dean, Thomas Salez, Joshua D. McGraw

Abstract: The dispersive spreading of microscopic particles in shear flows is influenced both by advection and thermal motion. At the nanoscale, interactions between such particles and their confining boundaries become unavoidable. We address the roles of electrostatic repulsion and absorption on the spatial distribution and dispersion of charged nanoparticles in near-surface shear flows, observed under eva… ▽ More The dispersive spreading of microscopic particles in shear flows is influenced both by advection and thermal motion. At the nanoscale, interactions between such particles and their confining boundaries become unavoidable. We address the roles of electrostatic repulsion and absorption on the spatial distribution and dispersion of charged nanoparticles in near-surface shear flows, observed under evanescent illumination. The electrostatic repulsion between particles and the lower charged surface is tuned by varying electrolyte concentrations. Particles leaving the field of vision can be neglected from further analysis, such that the experimental ensemble is equivalent to that of Taylor dispersion with absorption. These two ingredients modify the particle distribution, deviating strongly from the Gibbs-Boltzmann one at the nanoscale studied here. The overall effect is to restrain the accessible space available to particles, leading to a striking, ten-fold reduction in the spreading dynamics as compared to the non-interacting case. △ Less

Submitted 6 January, 2023; v1 submitted 15 June, 2022; originally announced June 2022.

Enhanced Dip Coating on a Soft Substrate

Authors: Vincent Bertin, Jacco Snoeijer, Elie Raphaël, Thomas Salez

Abstract: A solid, withdrawn from a liquid bath, entrains a thin liquid film. This simple process, first described by Landau, Levich and Derjaguin (LLD), is commonly observed in everyday life. It also plays a central role in liquid capture by animals, and is widely used for surface-coating purposes in industry. Motivated by the emerging interest in the mechanics of very soft materials, and in particular the… ▽ More A solid, withdrawn from a liquid bath, entrains a thin liquid film. This simple process, first described by Landau, Levich and Derjaguin (LLD), is commonly observed in everyday life. It also plays a central role in liquid capture by animals, and is widely used for surface-coating purposes in industry. Motivated by the emerging interest in the mechanics of very soft materials, and in particular the resulting elastocapillary coupling, we develop a dip-coating model that accounts for the additional presence of a soft solid layer atop the rigid plate. The elastic response of this soft layer is described by a Winkler's foundation. Using a combination of numerical, scaling and asymptotic-matching methods, we find a new softness-dependent power-law regime for the thickness of entrained liquid at small capillary number, which corresponds to a modified physics at play in the dynamic meniscus. The crossover between this regime and the classical dip-coating one occurs when the substrate's deformation is comparable to the thickness of the entrained liquid film. △ Less

Submitted 1 March, 2022; originally announced March 2022.

Journal ref: Physical Review Fluids, 7 L102002 (2022)

Contactless Rheology of Soft Gels over a Broad Frequency Range

Authors: Zaicheng Zhang, Muhammad Arshad, Vincent Bertin, Samir Almohamad, Elie Raphaël, Thomas Salez, Abdelhamid Maali

Abstract: We report contactless measurements of the viscoelastic rheological properties of soft gels. The experiments are performed using a colloidal-probe Atomic Force Microscope (AFM) in a liquid environment and in dynamic mode. The mechanical response is measured as a function of the liquid gap thickness for different oscillation frequencies. Our measurements reveal an elastohydrodynamic (EHD) coupling b… ▽ More We report contactless measurements of the viscoelastic rheological properties of soft gels. The experiments are performed using a colloidal-probe Atomic Force Microscope (AFM) in a liquid environment and in dynamic mode. The mechanical response is measured as a function of the liquid gap thickness for different oscillation frequencies. Our measurements reveal an elastohydrodynamic (EHD) coupling between the flow induced by the probe oscillation and the viscoelastic deformation of the gels. The data are quantitatively described by a viscoelastic lubrication model. The frequency-dependent storage and loss moduli of the polydimethylsiloxane (PDMS) gels are extracted from fits of the data to the model and are in good agreement with the Chasset--Thirion law. Our results demonstrate that contactless colloidal-probe methods are powerful tools that can be used for probing soft interfaces finely over a wide range of frequencies. △ Less

Submitted 9 February, 2022; originally announced February 2022.

Dewetting of a thin polymer film under shear

Authors: Kheireddine Kadri, Jorge Peixinho, Thomas Salez, Guillaume Miquelard-Garnier, Cyrille Sollogoub

Abstract: The objective of this work is to study the role of shear on the rupture of ultrathin polymer films. To do so, a finite-difference numerical scheme for the resolution of the thin film equation was set up taking into account capillary and van der Waals (vdW) forces. This method was validated by comparing the dynamics obtained from an initial harmonic perturbation to established theoretical predictio… ▽ More The objective of this work is to study the role of shear on the rupture of ultrathin polymer films. To do so, a finite-difference numerical scheme for the resolution of the thin film equation was set up taking into account capillary and van der Waals (vdW) forces. This method was validated by comparing the dynamics obtained from an initial harmonic perturbation to established theoretical predictions. With the addition of shear, three regimes have then been evidenced as a function of the shear rate. In the case of low shear rates the rupture is delayed when compared to the no-shear problem, while at higher shear rates it is even suppressed: the perturbed interface goes back to its unperturbed state over time. In between these two limiting regimes, a transient one in which shear and vdW forces balance each other, leading to a non-monotonic temporal evolution of the perturbed interface, has been identified. While a linear analysis is sufficient to describe the rupture time in the absence of shear, the nonlinearities appear to be essential otherwise. △ Less

Submitted 21 July, 2021; originally announced July 2021.

Journal ref: Polymer, 235, 124283 (2021)

Nanobubble-induced flow of immersed glassy polymer films

Authors: Christian Pedersen, Shuai Ren, Yuliang Wang, Andreas Carlson, Thomas Salez

Abstract: We study the free-surface deformation dynamics of an immersed glassy thin polymer film supported on a substrate, induced by an air nanobubble at the free surface.We combine analytical and numerical treatments of the glassy thin film equation, resulting from the lubrication approximation applied to the surface mobile layer of the glassy film, under the driving of an axisymmetric step function in th… ▽ More We study the free-surface deformation dynamics of an immersed glassy thin polymer film supported on a substrate, induced by an air nanobubble at the free surface.We combine analytical and numerical treatments of the glassy thin film equation, resulting from the lubrication approximation applied to the surface mobile layer of the glassy film, under the driving of an axisymmetric step function in the pressure term accounting for the nanobubble's Laplace pressure. Using the method of Green's functions, we derive a general solution for the film profile. We show that the lateral extent of the surface perturbation follows an asymptotic viscocapillary power-law behaviour in time, and that the film's central height decays logarithmically in time in this regime. This process eventually leads to film rupture and dewetting at finite time, for which we provide an analytical prediction exhibiting explicitly the dependencies in surface mobility, film thickness and bubble size, among others. Finally, using finite-element numerical integration, we discuss how non-linear effects induced by the curvature and film profile can affect the evolution. △ Less

Submitted 7 April, 2021; originally announced April 2021.

Soft-lubrication interactions between a rigid sphere and an elastic wall

Authors: Vincent Bertin, Yacine Amarouchene, Elie Raphael, Thomas Salez

Abstract: The motion of an object within a viscous fluid and in the vicinity of a soft surface induces a hydrodynamic stress field that deforms the latter, thus modifying the boundary conditions of the flow. This results in elastohydrodynamic (EHD) interactions experienced by the particle. Here, we derive a soft-lubrication model, in order to compute all the forces and torque applied on a rigid sphere that… ▽ More The motion of an object within a viscous fluid and in the vicinity of a soft surface induces a hydrodynamic stress field that deforms the latter, thus modifying the boundary conditions of the flow. This results in elastohydrodynamic (EHD) interactions experienced by the particle. Here, we derive a soft-lubrication model, in order to compute all the forces and torque applied on a rigid sphere that is free to translate and rotate near an elastic wall. We focus on the limit of small deformations of the surface with respect to the fluid-gap thickness, and perform a perturbation analysis in dimensionless compliance. The response is computed in the framework of linear elasticity, for planar elastic substrates in the limiting cases of thick and thin layers. The EHD forces are also obtained analytically using the Lorentz reciprocal theorem. △ Less

Submitted 21 June, 2021; v1 submitted 2 April, 2021; originally announced April 2021.

Journal ref: J. Fluid Mech. 933 (2022) A23

Universal Self-Similar Attractor in the Bending-Driven Leveling of Thin Viscous Films

Authors: Christian Pedersen, Thomas Salez, Andreas Carlson

Abstract: We study theoretically and numerically the bending-driven leveling of thin viscous films within the lubrication approximation. We derive the Green's function of the linearized thin-film equation and further show that it represents a universal self-similar attractor at long times. As such, the rescaled perturbation of the film profile converges in time towards the rescaled Green's function, for any… ▽ More We study theoretically and numerically the bending-driven leveling of thin viscous films within the lubrication approximation. We derive the Green's function of the linearized thin-film equation and further show that it represents a universal self-similar attractor at long times. As such, the rescaled perturbation of the film profile converges in time towards the rescaled Green's function, for any summable initial perturbation profile. In addition, for stepped axisymmetric initial conditions, we demonstrate the existence of another, short-term and one-dimensional-like self-similar regime. Besides, we characterize the convergence time towards the long-term universal attractor in terms of the relevant physical and geometrical parameters, and provide the local hydrodynamic fields and global elastic energy in the universal regime as functions of time. Finally, we extend our analysis to the non-linear thin-film equation through numerical simulations. △ Less

Submitted 7 September, 2021; v1 submitted 20 November, 2020; originally announced November 2020.

Contactless rheology of finite-size air-water interfaces

Authors: Vincent Bertin, Zaicheng Zhang, Rodolphe Boisgard, Christine Grauby-Heywang, Elie Raphael, Thomas Salez, Abdelhamid Maali

Abstract: We present contactless atomic-force microscopy measurements of the hydrodynamic interactions between a rigid sphere and an air bubble in water at the micro-scale. The size of the bubble is found to have a significant effect on the response due to the long-range capillary deformation of the air-water interface. To rationalize the experimental data, we develop a viscocapillary lubrication model acco… ▽ More We present contactless atomic-force microscopy measurements of the hydrodynamic interactions between a rigid sphere and an air bubble in water at the micro-scale. The size of the bubble is found to have a significant effect on the response due to the long-range capillary deformation of the air-water interface. To rationalize the experimental data, we develop a viscocapillary lubrication model accounting for the finite-size effect. The comparison between experiments and theory allows us to measure the air-water surface tension, without contact, paving the way towards robust contactless tensiometry of polluted air-water interfaces. △ Less

Submitted 2 March, 2021; v1 submitted 30 September, 2020; originally announced September 2020.

Journal ref: Phys. Rev. Research 3, 032007 (2021)

Time dependence of advection-diffusion coupling for nanoparticle ensembles

Authors: Alexandre Vilquin, Vincent Bertin, Pierre Soulard, Gabriel Guyard, Elie Raphaël, Frederic Restagno, Thomas Salez, Joshua Mcgraw

Abstract: Advection-diffusion coupling can enhance particle and solute dispersion by orders of magnitude as compared to pure diffusion, with a steady state being reached for confined flow regions such as a nanopore or blood vessel. Here, by using evanescent wave microscopy, we measure for the first time the full dynamics of Taylor dispersion, highlighting the crucial role of the initial concentration profil… ▽ More Advection-diffusion coupling can enhance particle and solute dispersion by orders of magnitude as compared to pure diffusion, with a steady state being reached for confined flow regions such as a nanopore or blood vessel. Here, by using evanescent wave microscopy, we measure for the first time the full dynamics of Taylor dispersion, highlighting the crucial role of the initial concentration profile. We make time-dependent, nanometrically-resolved particle dispersion measurements varying nanoparticle size, velocity gradient, and viscosity in sub-micrometric near-surface flows. Such resolution permits a measure of the full dynamical approach and crossover into the steady state, revealing a family of master curves. Remarkably, our results show that the dynamics depend sensitively on the initial spatial distribution of the nanoparticles. These observations are in quantitative agreement with existing analytical models and numerical simulations performed herein. We anticipate that our study will be a first step toward observing and modelling more complex situations at the nanoscale, such as target finding and chemical reactions in nanoconfined flows, dynamical adsorption and capture problems, as well as nanoscale drug delivery systems. △ Less

Submitted 29 April, 2021; v1 submitted 16 July, 2020; originally announced July 2020.

Journal ref: Phys. Rev. Fluids 6, 064201 (2021)

Axisymmetric Stokes flow due to a point-force singularity acting between two coaxially positioned rigid no-slip disks

Authors: Abdallah Daddi-Moussa-Ider, Alexander Sprenger, Yacine Amarouchene, Thomas Salez, Clarissa Schönecker, Thomas Richter, Hartmut Löwen, Andreas Menzel

Abstract: We investigate theoretically on the basis of the steady Stokes equations for a viscous incompressible fluid the flow induced by a Stokeslet located on the centre axis of two coaxially positioned rigid disks. The Stokeslet is directed along the centre axis. No-slip boundary conditions are assumed to hold at the surfaces of the disks. We perform the calculation of the associated Green's function in… ▽ More We investigate theoretically on the basis of the steady Stokes equations for a viscous incompressible fluid the flow induced by a Stokeslet located on the centre axis of two coaxially positioned rigid disks. The Stokeslet is directed along the centre axis. No-slip boundary conditions are assumed to hold at the surfaces of the disks. We perform the calculation of the associated Green's function in large parts analytically, reducing the spatial evaluation of the flow field to one-dimensional integrations amenable to numerical treatment. To this end, we formulate the solution of the hydrodynamic problem for the viscous flow surrounding the two disks as a mixed-boundary-value problem, which we then reduce into a system of four dual integral equations. We show the existence of viscous toroidal eddies arising in the fluid domain bounded by the two disks, manifested in the plane containing the centre axis through adjacent counterrotating eddies. Additionally, we probe the effect of the confining disks on the slow dynamics of a point-like particle by evaluating the hydrodynamic mobility function associated with axial motion. Thereupon, we assess the appropriateness of the commonly-employed superposition approximation and discuss its validity and applicability as a function of the geometrical properties of the system. Additionally, we complement our semi-analytical approach by finite-element computer simulations, which reveals a good agreement. Our results may find applications in guiding the design of microparticle-based sensing devices and electrokinetic transport in small scale capacitors. △ Less

Submitted 10 June, 2020; originally announced June 2020.

Capillary Levelling of Immiscible Bilayer Films

Authors: Vincent Bertin, Carmen Lee, Thomas Salez, Elie Raphael, Kari Dalnoki-Veress

Abstract: Flow in thin films is highly dependent on the boundary conditions. Here, we study the capillary levelling of thin bilayer films composed of two immiscible liquids. Specifically, a stepped polymer layer is placed atop another, flat polymer layer. The Laplace pressure gradient resulting from the curvature of the step induces flow in both layers, which dissipates the excess capillary energy stored in… ▽ More Flow in thin films is highly dependent on the boundary conditions. Here, we study the capillary levelling of thin bilayer films composed of two immiscible liquids. Specifically, a stepped polymer layer is placed atop another, flat polymer layer. The Laplace pressure gradient resulting from the curvature of the step induces flow in both layers, which dissipates the excess capillary energy stored in the stepped interface. The effect of different viscosity ratios between the bottom and top layers is investigated. We invoke a long-wave expansion of low-Reynolds-number hydrodynamics to model the energy dissipation due to the coupled viscous flows in the two layers. Good agreement is found between the experiments and the model. Analysis of the latter further reveals an interesting double crossover in time, from Poiseuille flow, to plug flow, and finally to Couette flow. The crossover time scales depend on the viscosity ratio between the two liquids, allowing for the dissipation mechanisms to be selected and finely tuned by varying this ratio. △ Less

Submitted 5 May, 2020; originally announced May 2020.

Journal ref: J. Fluid Mech. 911 (2021) A13

Nonlinear amplification of adhesion forces in interleaved books

Authors: Raphaelle Taub, Thomas Salez, Hector Alarcon, Elie Raphael, Christophe Poulard, Frédéric Restagno

Abstract: Two interleaved phonebooks are nearly impossible to separate by pulling their spines. The very slight force exerted by the outer sheets of the assembly is amplified as the exponential of the square of the number of sheets, leading to a highly-resistant system even with a small number of sheets. We present a systematic and detailed study of the influences of the normal external force and the geomet… ▽ More Two interleaved phonebooks are nearly impossible to separate by pulling their spines. The very slight force exerted by the outer sheets of the assembly is amplified as the exponential of the square of the number of sheets, leading to a highly-resistant system even with a small number of sheets. We present a systematic and detailed study of the influences of the normal external force and the geometrical parameters of the booklets on the assembly strength. We conclude that the paper-paper adhesion force between the two outer sheets, on the order of a few mN, is the one that is amplified by the two interleaved system. The two-phonebooks experiment that has attracted the attention of students and non-scientific public all around the world as an outstanding demonstration of the strength of friction appears to be as well a spectacular macroscopic manifestation of the microscopic friction-adhesion coupling. △ Less

Submitted 3 April, 2020; originally announced April 2020.

Soft nanobubbles can deform rigid glasses

Authors: Shuai Ren, Christian Pedersen, Andreas Carlson, Thomas Salez, Yuliang Wang

Abstract: Confined glasses and their anomalous interfacial rheology raise important questions in fundamental research and numerous practical applications. In this Letter, we study the influence of interfacial air nanobubbles on the free surface of ultrathin high-molecular-weight glassy polystyrene films immersed in water, in ambient conditions. In particular, we reveal the counterintuitive fact that a soft… ▽ More Confined glasses and their anomalous interfacial rheology raise important questions in fundamental research and numerous practical applications. In this Letter, we study the influence of interfacial air nanobubbles on the free surface of ultrathin high-molecular-weight glassy polystyrene films immersed in water, in ambient conditions. In particular, we reveal the counterintuitive fact that a soft nanobubble is able to deform the surface of a rigid glass, forming a nanocrater with a depth that increases with time. By combining in-situ atomic-force-microscopy measurements and a modified lubrication model for the liquid-like layer at the free surface of the glass, we demonstrate that the capillary pressure in the nanobubble together with the liquid-like layer at the free surface of the glass determine the spatiotemporal growth of the nanocraters. Finally, from the excellent agreement between the experimental profiles and the numerical solutions of the governing glassy thin-film equation, we are able to precisely extract the surface mobility of the glass. In addition to revealing and quantifying how surface nanobubbles deform immersed glasses, until the latter eventually dewet from their substrates, our work provides a novel, precise, and simple measurement of the surface nanorheology of glasses. △ Less

Submitted 24 January, 2020; originally announced January 2020.

Journal ref: Phys. Rev. Research 2, 043166 (2020)

Symmetrization of Thin Free-Standing Liquid Films via Capillary-Driven Flow

Authors: Vincent Bertin, John Niven, Howard A. Stone, Thomas Salez, Elie Raphael, Kari Dalnoki-Veress

Abstract: We present experiments to study the relaxation of a nano-scale cylindrical perturbation at one of the two interfaces of a thin viscous free-standing polymeric film. Driven by capillarity, the film flows and evolves towards equilibrium by first symmetrizing the perturbation between the two interfaces, and eventually broadening the perturbation. A full-Stokes hydrodynamic model is presented which ac… ▽ More We present experiments to study the relaxation of a nano-scale cylindrical perturbation at one of the two interfaces of a thin viscous free-standing polymeric film. Driven by capillarity, the film flows and evolves towards equilibrium by first symmetrizing the perturbation between the two interfaces, and eventually broadening the perturbation. A full-Stokes hydrodynamic model is presented which accounts for both the vertical and lateral flows, and which highlights the symmetry in the system. The symmetrization time is found to depend on the membrane thickness, surface tension, and viscosity. △ Less

Submitted 17 December, 2019; originally announced December 2019.

Journal ref: Phys. Rev. Lett. 124, 184502 (2020)

Rotation of a submerged finite cylinder moving down a soft incline

Authors: Baudouin Saintyves, Bhargav Rallabandi, Theo Jules, Jesse Ault, Thomas Salez, Clarissa Schönecker, Howard Stone, L. Mahadevan

Abstract: A submerged finite cylinder moving under its own weight along a soft incline lifts off and slides at a steady velocity while also spinning. Here, we experimentally quantify the steady spinning of the cylinder and show theoretically that it is due to a combination of an elastohydrodynamic torque generated by flow in the variable gap, and the viscous friction on the edges of the finite-length cylind… ▽ More A submerged finite cylinder moving under its own weight along a soft incline lifts off and slides at a steady velocity while also spinning. Here, we experimentally quantify the steady spinning of the cylinder and show theoretically that it is due to a combination of an elastohydrodynamic torque generated by flow in the variable gap, and the viscous friction on the edges of the finite-length cylinder. The relative influence of the latter depends on the aspect ratio of the cylinder as well as the deformability of the substrate, which we express in term of a single scaled compliance parameter. By varying this compliance parameter, we show that our experimental results are consistent with a transition from an edge-effect dominated regime for short cylinders to a gap-dominated elastohydrodynamic regime when the cylinder is very long. △ Less

Submitted 6 December, 2019; originally announced December 2019.

Lift induced by slip inhomogeneities in lubricated contacts

Authors: Aidan Rinehart, Uǧis L{ā}cis, Thomas Salez, Shervin Bagheri

Abstract: Lubrication forces depend to a high degree on elasticity, texture, charge, chemistry, and temperature of the interacting surfaces. Therefore, by appropriately designing surface properties, we may tailor lubrication forces to reduce friction, adhesion and wear between sliding surfaces or control repulsion, assembly, and collision of interacting particles. Here, we show that variations of slippage… ▽ More Lubrication forces depend to a high degree on elasticity, texture, charge, chemistry, and temperature of the interacting surfaces. Therefore, by appropriately designing surface properties, we may tailor lubrication forces to reduce friction, adhesion and wear between sliding surfaces or control repulsion, assembly, and collision of interacting particles. Here, we show that variations of slippage on one of the contacting surfaces induce a lift force. We demonstrate the consequences of this force on the mobility of a cylinder traveling near a wall and show the emergence of particle oscillation and migration that would not otherwise occur in the Stokes flow regime.Our study has implications for understanding how inhomogeneous biological interfaces interact with their environment; it also reveals a new method of patterning surfaces for controlling the motion of nearby particles. △ Less

Submitted 30 April, 2020; v1 submitted 5 December, 2019; originally announced December 2019.

Journal ref: Phys. Rev. Fluids 5, 082001 (2020)

Cooperative strings and glassy dynamics in various confined geometries

Authors: Maxence Arutkin, Elie Raphaël, James Forrest, Thomas Salez

Abstract: Previously, we developed a minimal model based on random cooperative strings for the relaxation of supercooled liquids in the bulk and near free interfaces, and we recovered some key experimental observations. In this article, after recalling the main ingredients of the cooperative string model, we study the effective glass transition and surface mobility of various experimentally-relevant confine… ▽ More Previously, we developed a minimal model based on random cooperative strings for the relaxation of supercooled liquids in the bulk and near free interfaces, and we recovered some key experimental observations. In this article, after recalling the main ingredients of the cooperative string model, we study the effective glass transition and surface mobility of various experimentally-relevant confined geometries: freestanding films, supported films, spherical particles, and cylindrical particles, with free interfaces and/or passive substrates. Finally, we introduce a novel way to account for a purely attractive substrate, and explore the impact of the latter in the previous geometries. △ Less

Submitted 27 November, 2019; originally announced November 2019.

Journal ref: Phys. Rev. E 101, 032122 (2020)

Direct Measurement of the Elastohydrodynamic Lift Force at the Nanoscale

Authors: Zaicheng Zhang, Vincent Bertin, Muhammad Arshad, Elie Raphael, Thomas Salez, Abdelhamid Maali

Abstract: We present the first direct measurement of the elastohydrodynamic lift force acting on a sphere moving within a viscous liquid, near and along a soft substrate under nanometric confinement. Using atomic force microscopy, the lift force is probed as a function of the gap size, for various driving velocities, viscosities, and stiffnesses. The force increases as the gap is reduced and shows a saturat… ▽ More We present the first direct measurement of the elastohydrodynamic lift force acting on a sphere moving within a viscous liquid, near and along a soft substrate under nanometric confinement. Using atomic force microscopy, the lift force is probed as a function of the gap size, for various driving velocities, viscosities, and stiffnesses. The force increases as the gap is reduced and shows a saturation at small gap. The results are in excellent agreement with scaling arguments and a quantitative model developed from the soft lubrication theory, in linear elasticity, and for small compliances. For larger compliances, or equivalently for smaller confinement length scales, an empirical scaling law for the observed saturation of the lift force is given and discussed. △ Less

Submitted 6 November, 2019; v1 submitted 1 July, 2019; originally announced July 2019.

Journal ref: Phys. Rev. Lett. 124, 054502 (2020)

Probing the adsorption/desorption of amphiphilic polymers at the air-water interface during large interfacial deformations

Authors: C. Trégouët, Thomas Salez, N. Pantoustier, P. Perrin, M. Reyssat, C. Monteux

Abstract: Hydrophobically modified polymers are good candidates for the stabilization of liquid interfaces thanks to the high anchoring energy of the hydrophobic parts. In this article we probe the interfacial anchoring of a series of home-made hydrophobically modified polymers of controlled degree of grafting by studying their behavior upon large area dilations and compressions. By comparing the measured i… ▽ More Hydrophobically modified polymers are good candidates for the stabilization of liquid interfaces thanks to the high anchoring energy of the hydrophobic parts. In this article we probe the interfacial anchoring of a series of home-made hydrophobically modified polymers of controlled degree of grafting by studying their behavior upon large area dilations and compressions. By comparing the measured interfacial tension to the one that we expect in the case of a constant number of adsorbed monomers, we are able to deduce whether desorption or adsorption occurs during area variations. We find that the polymer chains with the longest hydrophobic grafts desorb for larger compressions than the polymers with the shortest grafts, because of their larger desorption energy. Furthermore, we observe more desorption for polymers with the highest grafting densities. We attribute this counter intuitive result to the fact that for high grafting densities, the length of the polymer loops is shorter, hence the elastic penalty upon compression is larger for these layers, leading to a faster desorption. The dilatation experiments reveal that the number of adsorbed anchors remains constant in the case of chains with low grafting density while chains with the highest degree of grafting seem to show some degree of adsorption during the dilatation. Therefore for these highly grafted chains there may be unadsorbed grafts remaining in the vicinity of the interface, which may adsorb quickly to the interface upon dilatation. △ Less

Submitted 1 March, 2019; originally announced March 2019.

Asymptotic regimes in elastohydrodynamic and stochastic leveling on a viscous film

Authors: Christian Pedersen, John Niven, Thomas Salez, Kari Dalnoki-Veress, Andreas Carlson

Abstract: An elastic sheet that deforms near a solid substrate in a viscous fluid is a situation relevant to various dynamical processes in biology, geophysics and engineering. Here, we study the relaxation dynamics of an elastic plate resting on a thin viscous film that is supported by a solid substrate. By combining scaling analysis, numerical simulations and experiments, we identify asymptotic regimes fo… ▽ More An elastic sheet that deforms near a solid substrate in a viscous fluid is a situation relevant to various dynamical processes in biology, geophysics and engineering. Here, we study the relaxation dynamics of an elastic plate resting on a thin viscous film that is supported by a solid substrate. By combining scaling analysis, numerical simulations and experiments, we identify asymptotic regimes for the elastohydrodynamic leveling of a surface perturbation of the form of a bump, when the flow is driven by either the elastic bending of the plate or thermal fluctuations. In both cases, two distinct regimes are identified when the bump height is either much larger or much smaller than the thickness of the pre-wetted viscous film. Our analysis reveals a distinct crossover between the similarity exponents with the ratio of the perturbation height to the film height. △ Less

Submitted 13 November, 2019; v1 submitted 27 February, 2019; originally announced February 2019.

Comments: 10 pages, 6 figures

Shearing-induced contact pattern formation in hydrogels sliding in polymer solution

Authors: Shintaro Yashima, Satoshi Hirayama, Takayuki Kurokawa, Thomas Salez, Haruna Takefuji, Wei Hong, Jian Ping Gong

Abstract: The contact of a hydrogel during the rotational shearing on glass surface in concentrated polymer solution was observed in situ. Dynamic contact patterns that rotate in-phase with the rotational shearing of the gel were observed for the first time. The contact patterns with a periodicity in the circumferential direction appeared and developed into fine characters with the shearing time. The patter… ▽ More The contact of a hydrogel during the rotational shearing on glass surface in concentrated polymer solution was observed in situ. Dynamic contact patterns that rotate in-phase with the rotational shearing of the gel were observed for the first time. The contact patterns with a periodicity in the circumferential direction appeared and developed into fine characters with the shearing time. The patterns appeared more quickly at elevated sliding velocity, polymer concentration, and normal pressure. Furthermore, the softness of the gel also substantially influenced the character of the patterns. The pattern formation was discussed in terms of the non-linear rheology of the polymer solution at the rotational soft interface. △ Less

Submitted 16 February, 2019; v1 submitted 18 January, 2019; originally announced January 2019.

Microfluidic probing of the complex interfacial rheology of multilayer capsules

Authors: Corentin Tregouët, Thomas Salez, Mathilde Reyssat, Cécile Monteux

Abstract: Encapsulation of chemicals using polymer membranes enables to control their transport and delivery for applications such as agrochemistry or detergency. To rationalize the design of polymer capsules, it is necessary to understand how the membranes' mechanical properties control the transport and release of the cargo. In this article, we use microfluidics to produce model polymer capsules and study… ▽ More Encapsulation of chemicals using polymer membranes enables to control their transport and delivery for applications such as agrochemistry or detergency. To rationalize the design of polymer capsules, it is necessary to understand how the membranes' mechanical properties control the transport and release of the cargo. In this article, we use microfluidics to produce model polymer capsules and study in situ their behavior in controlled elongational flows. Our model capsules are obtained by assembling polymer mono and hydrogen-bonded bilayers at the surface of an oil droplet in water. We also use microfluidics to probe in situ the mechanical properties of the membranes in a controlled elongational flow generated by introducing the capsules through a constriction and then in a larger chamber. The deformation and relaxation of the capsules depend on their composition and especially on the molecular interactions between the polymer chains that form the membranes and the anchoring energy of the first layer. We develop a model and perform numerical simulations to extract the main interfacial properties of the capsules from the measurement of their deformations in the microchannels. △ Less

Submitted 14 December, 2018; originally announced December 2018.

Molecular dynamics simulation of the capillary leveling of a glass-forming liquid

Authors: Ioannis Tanis, Kostas Karatasos, Thomas Salez

Abstract: Motivated by recent experimental studies probing i) the existence of a mobile layer at the free surface of glasses, and ii) the capillary leveling of polymer nanofilms, we study the evolution of square-wave patterns at the free surface of a generic glass-forming binary Lennard-Jones mixture over a wide temperature range, by means of molecular dynamics simulations. The pattern's amplitude is monito… ▽ More Motivated by recent experimental studies probing i) the existence of a mobile layer at the free surface of glasses, and ii) the capillary leveling of polymer nanofilms, we study the evolution of square-wave patterns at the free surface of a generic glass-forming binary Lennard-Jones mixture over a wide temperature range, by means of molecular dynamics simulations. The pattern's amplitude is monitored and the associated decay rate is extracted. The evolution of the latter as a function of temperature exhibits a crossover between two distinct behaviours, over a temperature range typically bounded by the glass-transition temperature and the mode-coupling critical temperature. Layer-resolved analysis of the film particles' mean-squared displacements further shows that diffusion at the surface is considerably faster than in the bulk, below the glass-transition temperature. The diffusion coefficient of the surface particles is larger than its bulk counterpart by a factor that reaches 105 at the lowest temperature studied. This factor decreases upon heating, in agreement with recent experimental studies. △ Less

Submitted 17 September, 2019; v1 submitted 31 October, 2018; originally announced October 2018.

Hydroelastic wake on a thin elastic sheet floating on water

Authors: Jean-Christophe Ono-dit-Biot, Miguel Trejo, Elsie Loukiantcheko, Max Lauch, Elie Raphaël, Kari Dalnoki-Veress, Thomas Salez

Abstract: We investigate the hydroelastic wake created by a perturbation moving at constant speed along a thin elastic sheet floating at the surface of deep water. Using a high-resolution cross-correlation imaging technique, we characterize the waves as a function of the perturbation speed, for different sheet thicknesses. The general theoretical expression for the dispersion relation of hydroelastic waves… ▽ More We investigate the hydroelastic wake created by a perturbation moving at constant speed along a thin elastic sheet floating at the surface of deep water. Using a high-resolution cross-correlation imaging technique, we characterize the waves as a function of the perturbation speed, for different sheet thicknesses. The general theoretical expression for the dispersion relation of hydroelastic waves includes three components: gravity, bending and stretching. The bending modulus and the tension in the sheet are independently measured. Excellent agreement is found between the experimental data and the theoretical expression. △ Less

Submitted 19 June, 2018; originally announced June 2018.

Journal ref: Phys. Rev. Fluids 4, 014808 (2019)

Elastowetting of Soft Hydrogel Spheres

Authors: Aditi Chakrabarti, Amir Porat, Elie Raphaël, Thomas Salez, Manoj K. Chaudhury

Abstract: When a soft hydrogel sphere is placed on a rigid hydrophilic substrate, it undergoes arrested spreading by forming an axisymmetric foot near the contact line, while conserving its global spherical shape. In contrast, liquid water (that constitutes greater than 90% of the hydrogel's volume) spreads into a thin film on the same surface. We study systematically this elastowetting of gel spheres on su… ▽ More When a soft hydrogel sphere is placed on a rigid hydrophilic substrate, it undergoes arrested spreading by forming an axisymmetric foot near the contact line, while conserving its global spherical shape. In contrast, liquid water (that constitutes greater than 90% of the hydrogel's volume) spreads into a thin film on the same surface. We study systematically this elastowetting of gel spheres on substrates of different surface energies, and find that their contact angle increases as the work of adhesion between the gel and the substrate decreases, as one would observe for drops of pure water - albeit being larger than in the latter case. This difference in the contact angles of gel and water appears to be due to the elastic shear stresses that develop in the gel and oppose its spreading. Indeed, by increasing the elastic modulus of the gel spheres, we find that their contact angle also increases. In addition, the length of the contact foot increases with the work of adhesion and sphere size, while it decreases when the elastic modulus of the gel is increased. We discuss those experimental results in light of a minimal analysis based on energy minimization, volume conservation, and scaling arguments. △ Less

Submitted 29 January, 2018; originally announced January 2018.

Journal ref: Langmuir, 34 3894 (2018)

Transient deformation of a droplet near a microfluidic constriction : a quantitative analysis

Authors: Corentin Trégouët, Thomas Salez, Cécile Monteux, Mathilde Reyssat

Abstract: We report on experiments that consist in deforming a collection of monodisperse droplets produced by a microfluidic chip through a flow-focusing device. We show that a proper numerical modelling of the flow is necessary to access the stress applied by the latter on the droplet along its trajectory through the chip. This crucial step enables the full integration of the differential equation governi… ▽ More We report on experiments that consist in deforming a collection of monodisperse droplets produced by a microfluidic chip through a flow-focusing device. We show that a proper numerical modelling of the flow is necessary to access the stress applied by the latter on the droplet along its trajectory through the chip. This crucial step enables the full integration of the differential equation governing the dynamical deformation, and consequently the robust measurement of the interfacial tension by fitting the experiments with the calculated deformation. Our study thus demonstrates the feasibility of quantitative in-situ rheology in microfluidic flows involving e.g. droplets, capsules or cells. △ Less

Submitted 18 January, 2018; originally announced January 2018.

Journal ref: Physical Review Fluids, 3 053603 (2018)

Surface energy of strained amorphous solids

Authors: Rafael D. Schulman, Miguel Trejo, Thomas Salez, Elie Raphael, Kari Dalnoki-Veress

Abstract: Surface stress and surface energy are fundamental quantities which characterize the interface between two materials. Although these quantities are identical for interfaces involving only fluids, the Shuttleworth effect demonstrates that this is not the case for most interfaces involving solids, since their surface energies change with strain. Crystalline materials are known to have strain dependen… ▽ More Surface stress and surface energy are fundamental quantities which characterize the interface between two materials. Although these quantities are identical for interfaces involving only fluids, the Shuttleworth effect demonstrates that this is not the case for most interfaces involving solids, since their surface energies change with strain. Crystalline materials are known to have strain dependent surface energies, but in amorphous materials, such as polymeric glasses and elastomers, the strain dependence is debated due to a dearth of direct measurements. Here, we utilize contact angle measurements on strained glassy and elastomeric solids to address this matter. We show conclusively that interfaces involving polymeric glasses exhibit strain dependent surface energies, and give strong evidence for the absence of such a dependence for incompressible elastomers. The results provide fundamental insight into our understanding of the interfaces of amorphous solids and their interaction with contacting liquids. △ Less

Submitted 14 January, 2018; v1 submitted 25 November, 2017; originally announced November 2017.

Comments: 8 pages, 4 figures

Journal ref: Nature Communications, 9 982 (2018)