-
Discrimination of neutron-$γ$ in the low energy regime using machine learning for an EJ-276D plastic scintillator
Authors:
S. Panda,
P. K. Netrakanti,
S. P. Behera,
R. R. Sahu,
K. Kumar,
R. Sehgal,
D. K. Mishra,
V. Jha
Abstract:
In this work, we present results for discrimination of neutron and $γ$ events using a plastic scintillator detector with pulse shape discrimination capabilities. Machine learning (ML) algorithms are used to improve the discriminatory power between neutron and $γ$ events at lower energy ranges which otherwise are not addressed by the conventional pulse shape discrimination techniques. The use of a…
▽ More
In this work, we present results for discrimination of neutron and $γ$ events using a plastic scintillator detector with pulse shape discrimination capabilities. Machine learning (ML) algorithms are used to improve the discriminatory power between neutron and $γ$ events at lower energy ranges which otherwise are not addressed by the conventional pulse shape discrimination techniques. The use of a multilayer perceptron with Bayesian inference (MLPBNN) and support vector machine (SVM) algorithms are studied using the recorded waveforms from the detector. Three variables are constructed for the input of ML algorithms, which captures the essence of the differences in the head and tail part of the neutron and $γ$ waveforms. The training and the testing of the ML algorithms are done using an AmBe neutron source. In the lower energy region, the results obtained from the ML predictions are compared with the results obtained from a time of flight (ToF) technique to benchmark the overall performance of the ML algorithms. A reasonable agreement is observed between the results obtained from ML algorithm and the ToF experiment in the studied energy range. The MLPBNN gives better discriminatory power for the neutron and $γ$ events than the SVM algorithm.
△ Less
Submitted 13 June, 2025;
originally announced June 2025.
-
Phase-based analysis and control of low Reynolds number aeroelastic flows
Authors:
Chathura R. Sumanasiri,
Tulsi Ram Sahu,
Aditya G. Nair
Abstract:
Flutter in lightweight airfoils under unsteady flows presents a critical challenge in aeroelastic stability and control. This study uncovers phase-localized mechanisms that drive the onset and suppression of flutter in a freely pitching airfoil at low Reynolds number. By introducing targeted impulsive stiffness perturbations, we identify critical phases that trigger instability. Using phase-sensit…
▽ More
Flutter in lightweight airfoils under unsteady flows presents a critical challenge in aeroelastic stability and control. This study uncovers phase-localized mechanisms that drive the onset and suppression of flutter in a freely pitching airfoil at low Reynolds number. By introducing targeted impulsive stiffness perturbations, we identify critical phases that trigger instability. Using phase-sensitivity functions, energy-transfer metrics, and dynamic mode decomposition, we show that flutter arises from phase lock-on between structural and fluid modes. Leveraging this insight, we design an energy-optimal, phase-based control strategy that applies transient heaving motions to disrupt synchronization and arrest unstable growth. This minimal, time-localized control suppresses subharmonic amplification and restores stable periodic motion.
△ Less
Submitted 30 May, 2025;
originally announced June 2025.
-
Real-time tuneable bright bonding plasmonic modes in Ga nanostructures
Authors:
Renu Raman Sahu,
Tapajyoti Das Gupta
Abstract:
The precise control of nanogaps is crucial for plasmonic nanoassemblies, where plasmon hybridization is highly sensitive to gap size and geometry. This sensitivity enables fine-tuning of the resonance wavelength and near-field enhancement, offering the potential for advanced optical applications. However, conventional lithographic techniques for gap modulation are constrained to discrete values an…
▽ More
The precise control of nanogaps is crucial for plasmonic nanoassemblies, where plasmon hybridization is highly sensitive to gap size and geometry. This sensitivity enables fine-tuning of the resonance wavelength and near-field enhancement, offering the potential for advanced optical applications. However, conventional lithographic techniques for gap modulation are constrained to discrete values and face challenges in achieving nanometer order of separations. Such limitations hinder the comprehensive study of plasmon coupling across varying interaction regimes. Overcoming these challenges is essential for advancing nanoplasmonic research and its practical applications. Herein, we demonstrate a tuneable plasmonic device in which real-time tunability of this hybridization mode is achieved via manipulation of the inter-droplet gap of liquid metal nanoparticles by macroscopic physical deformation. In particular, we show that the optical spectra obtained from the sample shift towards higher energy on the application of a linear strain, resulting in an increase of inter-droplet gaps leading to a direct probing of the bright modes in situ. Our method thus offers a novel means of exploring the fundamental concept of real-time tuneable plasmon hybridization as well as tuning of nanoparticle assembly with any desired gap in a controlled manner.
△ Less
Submitted 7 April, 2025;
originally announced April 2025.
-
Tailored Thin Films: Modulating Soft Photonics with Dynamically Tunable Large Area Microstructures via Controlled Thermal Processing
Authors:
Srijeeta Biswas,
Renu Raman Sahu,
Omkar Deokinandan Nayak Shinkre,
Shubham Meena,
Ramnishanth,
Mark Vailshery,
Tapajyoti Das Gupta
Abstract:
Self-assembled nano and micro-structures, particularly those capable of responsive erasure and regeneration, have garnered significant interest for their applications in smart photonics and electronics. However, current techniques for modulating these architectures largely depend on network rearrangement, posing challenges for in situ regeneration. Furthermore, their common fabrication techniques…
▽ More
Self-assembled nano and micro-structures, particularly those capable of responsive erasure and regeneration, have garnered significant interest for their applications in smart photonics and electronics. However, current techniques for modulating these architectures largely depend on network rearrangement, posing challenges for in situ regeneration. Furthermore, their common fabrication techniques are complex and uncontrolled with the structures formed not being amenable for large area applications, thus compromising their economic viability. Herein, we present a controlled thermal process strategy for fabricating large-area, dynamically tunable, 1D,2D and 3D micro and nanostructures on a wide range of compatible materials including metals, semiconductors and polymers. By tuning the temperature changes in the system, thermal expansion coefficients of thin films and substrates, surface energy, Youngs modulus and thickness of the thin films we achieve robust, uniform, periodic structures over extensive areas on soft and stretchable substrates. The process is further supported by a theoretical model that we developed and validated by experiments and simulations. To showcase the robustness of our approach, we present prototypes of dynamically tunable diffraction gratings, optical diffusers, large-area reflective displays, camouflage devices, out-coupling efficiency enhancers, wearable devices and mechanochromic sensors.
△ Less
Submitted 19 January, 2025; v1 submitted 10 January, 2025;
originally announced January 2025.
-
Operando Insights on the Degradation Mechanisms of Rhenium-doped and Undoped Molybdenum Disulfide Nanocatalysts for Electrolyzer Applications
Authors:
Raquel Aymerich-Armengol,
Miquel Vega-Paredes,
Zhenbin Wang,
Andrea M. Mingers,
Luca Camuti,
Jeeung Kim,
Jeongwook Bae,
Ilias Efthimiopoulos,
Rajib Sahu,
Filip Podjaski,
Martin Rabe,
Christina Scheu,
Joohyun Lim,
Siyuan Zhang
Abstract:
MoS2 nanostructures are promising catalysts for proton-exchange-membrane (PEM) electrolyzers to replace expensive noble metals. Their broadscale application demands high activity for the hydrogen evolution reaction (HER) as well as robust durability. Doping is commonly applied to enhance the HER activity of MoS2-based nanocatalysts, but the effect of dopants in the electrochemical and structural s…
▽ More
MoS2 nanostructures are promising catalysts for proton-exchange-membrane (PEM) electrolyzers to replace expensive noble metals. Their broadscale application demands high activity for the hydrogen evolution reaction (HER) as well as robust durability. Doping is commonly applied to enhance the HER activity of MoS2-based nanocatalysts, but the effect of dopants in the electrochemical and structural stability is yet to be discussed. Herein, we correlate operando electrochemical measurements to the structural evolution of the materials down to the nanometric scale by identical location electron microscopy and spectroscopy. The range of stable operation for MoS2 nanocatalysts with and without rhenium doping is experimentally defined. The responsible degradation mechanisms at first electrolyte contact, open circuit stabilization and HER conditions are experimentally identified and confirmed with the calculated Pourbaix diagram of Re-doped MoS2. Doping MoS2-based nanocatalysts is validated as a promising strategy for the continuous improvement of high performance and durable PEM electrolyzers.
△ Less
Submitted 21 April, 2024; v1 submitted 16 September, 2023;
originally announced September 2023.
-
Scalable fabrication of gap-plasmon-based dynamic and chromogenic nanostructures by capillary-interaction driven self-assembly of liquid-metal
Authors:
Renu Raman Sahu,
Alwar Samy Ramasamy,
Santosh Bhonsle S,
Mark Vailshery D C,
Tapajyoti Das Gupta
Abstract:
Dynamically tunable nanoengineered structures for coloration show promising applications in sensing, displays, and communication. However, their potential challenge remains in having a scalable manufacturing process over large scales in tens of cm of area. For the first time, we report a novel approach for fabricating chromogenic nanostructures that respond to mechanical stimuli by utilizing the f…
▽ More
Dynamically tunable nanoengineered structures for coloration show promising applications in sensing, displays, and communication. However, their potential challenge remains in having a scalable manufacturing process over large scales in tens of cm of area. For the first time, we report a novel approach for fabricating chromogenic nanostructures that respond to mechanical stimuli by utilizing the fluidic properties of polydimethylsiloxane (PDMS) as a substrate and the interfacial tension of liquid metal-based plasmonic nanoparticles. Relying on the PDMS tunable property and a physical deposition method, our approach is single-step, scalable, and does not rely on high carbon footprint lithographic processes. By tuning the oligomer content in PDMS, we show that varieties of structural colors covering a significant gamut in CIE coordinates are achieved. We develop a model which depicts the formation of Ga nanodroplets from the capillary interaction of oligomers in PDMS with Ga. We showcase the capabilities of our processing technique by presenting prototypes of reflective displays and sensors for monitoring body parts, smart bandages, and the capacity of the nanostructured film to map force in real time. These examples illustrate this technology's broad range of applications, such as large-area displays, devices for human-computer interactions, healthcare, and visual communication.
△ Less
Submitted 13 April, 2023;
originally announced April 2023.
-
Entangling microwaves with optical light
Authors:
Rishabh Sahu,
Liu Qiu,
William Hease,
Georg Arnold,
Yuri Minoguchi,
Peter Rabl,
Johannes M. Fink
Abstract:
Entanglement is a genuine quantum mechanical property and the key resource in currently developed quantum technologies. Sharing this fragile property between superconducting microwave circuits and optical or atomic systems would enable new functionalities but has been hindered by the tremendous energy mismatch of $\sim10^5$ and the resulting mutually imposed loss and noise. In this work we create…
▽ More
Entanglement is a genuine quantum mechanical property and the key resource in currently developed quantum technologies. Sharing this fragile property between superconducting microwave circuits and optical or atomic systems would enable new functionalities but has been hindered by the tremendous energy mismatch of $\sim10^5$ and the resulting mutually imposed loss and noise. In this work we create and verify entanglement between microwave and optical fields in a millikelvin environment. Using an optically pulsed superconducting electro-optical device, we deterministically prepare an itinerant microwave-optical state that is squeezed by $0.72^{+0.31}_{-0.25}$\,dB and violates the Duan-Simon separability criterion by $>5$ standard deviations. This establishes the long-sought non-classical correlations between superconducting circuits and telecom wavelength light with wide-ranging implications for hybrid quantum networks in the context of modularization, scaling, sensing and cross-platform verification.
△ Less
Submitted 9 January, 2023;
originally announced January 2023.
-
Coherent optical control of a superconducting microwave cavity via electro-optical dynamical back-action
Authors:
Liu Qiu,
Rishabh Sahu,
William Hease,
Georg Arnold,
Johannes M. Fink
Abstract:
Recent quantum technologies have established precise quantum control of various microscopic systems using electromagnetic waves. Interfaces based on cryogenic cavity electro-optic systems are particularly promising, due to the direct interaction between microwave and optical fields in the quantum regime. Quantum optical control of superconducting microwave circuits has been precluded so far due to…
▽ More
Recent quantum technologies have established precise quantum control of various microscopic systems using electromagnetic waves. Interfaces based on cryogenic cavity electro-optic systems are particularly promising, due to the direct interaction between microwave and optical fields in the quantum regime. Quantum optical control of superconducting microwave circuits has been precluded so far due to the weak electro-optical coupling as well as quasi-particles induced by the pump laser. Here we report the coherent control of a superconducting microwave cavity using laser pulses in a multimode electro-optical device at millikelvin temperature with near-unity cooperativity. Both the stationary and instantaneous responses of the microwave and optical modes comply with the coherent electro-optical interaction, and reveal only minuscule amount of excess back-action with an unanticipated time delay. Our demonstration enables wide ranges of applications beyond quantum transductions, from squeezing and quantum non-demolition measurements of microwave fields, to entanglement generation and hybrid quantum networks.
△ Less
Submitted 25 June, 2023; v1 submitted 22 October, 2022;
originally announced October 2022.
-
Development of Ni doped SnO$_2$ Dilute magnetic oxides for electronics and spintronics applications
Authors:
Y. S. Worku,
V. V. Srinivasu,
Dipti R. Sahu
Abstract:
We used a solid-state reaction method to prepare Sn$_{1-x}$Ni$_x$O$_2$ with $x$ = 0, 0.05, 0.1, 0.15 polycrystalline compounds. A rutile phase with tetragonal crystal structure was confirmed by X-ray diffraction. At room temperature, the magnetisation study shows that the saturation magnetization increases with Ni doping content whereas the coercive field decreases after $x$=0.1. The spin number i…
▽ More
We used a solid-state reaction method to prepare Sn$_{1-x}$Ni$_x$O$_2$ with $x$ = 0, 0.05, 0.1, 0.15 polycrystalline compounds. A rutile phase with tetragonal crystal structure was confirmed by X-ray diffraction. At room temperature, the magnetisation study shows that the saturation magnetization increases with Ni doping content whereas the coercive field decreases after $x$=0.1. The spin number increases as the Ni doping concentration increases, indicating that the incorporation of Ni into the Sn sites increases the number of spins interacting to improve the ferromagnetic phase , which is like saturation magnetization and coercive field.
△ Less
Submitted 3 June, 2022;
originally announced June 2022.
-
Multiple exciton generation and giant external quantum efficiency in VO$_2$
Authors:
S. R. Sahu,
A. Tripathy,
K. Dey,
N. Mansuri,
V. G. Sathe,
D. K. Shukla
Abstract:
Multiple exciton generation (MEG) is a widely studied phenomenon in semiconductor nanocrystals and quantum dots wherein photo-excited carriers relax by generating additional electron-hole pairs. Here, we present the first experimental observation of MEG and the same leading to giant external quantum efficiency (EQE) in VO$_2$, a prototype strongly correlated material. By employing a photoexcitatio…
▽ More
Multiple exciton generation (MEG) is a widely studied phenomenon in semiconductor nanocrystals and quantum dots wherein photo-excited carriers relax by generating additional electron-hole pairs. Here, we present the first experimental observation of MEG and the same leading to giant external quantum efficiency (EQE) in VO$_2$, a prototype strongly correlated material. By employing a photoexcitation (lamda ~ 488 nm) of ~ 4.2 times the bandgap, EQE in VO$_2$ is enhanced up to ~ 170 % at room temperature. Temperature dependent experiments exhibit the direct relation between MEG and strength of electron correlation and suggest that such a phenomenon could be exploited in large number of strongly correlated materials for high performance solar cell research in near future.
△ Less
Submitted 26 October, 2023; v1 submitted 10 February, 2022;
originally announced February 2022.
-
Enhancement of optical properties and dielectric nature of Sm$_3$+doped Na$_2$O-ZnO-TeO$_2$ Glass materials
Authors:
Jyotindra Nath Mirdda,
Subhadipta Mukhopadhyay,
Kriti Ranjan Sahu,
Makhanlal Nanda Goswami
Abstract:
Samarium doped Na$_2$O-ZnO-TeO$_2$ (NZT) glasses were prepared by the melt quenching method. The glass-forming ability and glass stability of prepared glass was estimated by Hruby parameter using Differential Thermal Analysis (DTA) and Thermo-gravimetric Analysis (TGA). The study of FTIR spectra and X-ray diffraction described the ionic nature and the amorphous pattern of glass respectively. The a…
▽ More
Samarium doped Na$_2$O-ZnO-TeO$_2$ (NZT) glasses were prepared by the melt quenching method. The glass-forming ability and glass stability of prepared glass was estimated by Hruby parameter using Differential Thermal Analysis (DTA) and Thermo-gravimetric Analysis (TGA). The study of FTIR spectra and X-ray diffraction described the ionic nature and the amorphous pattern of glass respectively. The absorption peaks were observed for the transitions 6H5/2-4P3/2 at 402 nm,6H5/2-4M19/2 at 418 nm, 6H5/2-4I15/2 at 462 nm and 6H5/2-4I11/2 at 478 nm in the absorption spectra. The optical band gap energy (Eg) was calculated and observed to be decreased from 2.95 eV to 1.50 eV with doping concentration. The visible emission band was observed in the Sm3+ doped glass samples. The variation of dielectric constant with frequency was found to be independent for the frequency range 3 kHz - 2 MHz. The measurement of temperature-dependent dc conductivity showed Arrhenius type mechanism of conduction.
△ Less
Submitted 22 January, 2022;
originally announced January 2022.
-
Optothermal pulling, trapping, and assembly of colloids using nanowire plasmons
Authors:
Vandana Sharma,
Sunny Tiwari,
Diptabrata Paul,
Ratimanasee Sahu,
Vijayakumar Chikkadi,
G. V. Pavan Kumar
Abstract:
Optical excitation of colloids can be harnessed to realize soft matter systems that are out of equilibrium. In this paper, we present our experimental studies on the dynamics of silica colloids in the vicinity of a silver nanowire propagating surface plasmon polaritons (SPPs). Due to the optothermal interaction, the colloids are directionally pulled towards the excitation point of the nanowire. Ha…
▽ More
Optical excitation of colloids can be harnessed to realize soft matter systems that are out of equilibrium. In this paper, we present our experimental studies on the dynamics of silica colloids in the vicinity of a silver nanowire propagating surface plasmon polaritons (SPPs). Due to the optothermal interaction, the colloids are directionally pulled towards the excitation point of the nanowire. Having reached this point, they are spatio-temporally trapped around the excitation location. By increasing the concentration of colloids in the system, we observe multi-particle assembly around the nanowire. This process is thermophoretically driven and assisted by SPPs. Furthermore, we find such an assembly to be sensitive to the excitation polarization at input of the nanowire. Numerically-simulated temperature distribution around an illuminated nanowire corroborates sensitivity to the excitation polarization. Our study will find relevance in exploration of SPPs-assisted optothermal pulling, trapping and assembly of colloids, and can serve as test-beds of plasmon-driven active matter.
△ Less
Submitted 25 November, 2021; v1 submitted 20 September, 2021;
originally announced September 2021.
-
Quantum-enabled interface between microwave and telecom light
Authors:
Rishabh Sahu,
William Hease,
Alfredo Rueda,
Georg Arnold,
Liu Qiu,
Johannes Fink
Abstract:
Photons at telecom wavelength are the ideal choice for high density interconnects while solid state qubits in the microwave domain offer strong interactions for fast quantum logic. Here we present a general purpose, quantum-enabled interface between itinerant microwave and optical light. We use a pulsed electro-optic transducer at millikelvin temperatures to demonstrate nanosecond timescale contro…
▽ More
Photons at telecom wavelength are the ideal choice for high density interconnects while solid state qubits in the microwave domain offer strong interactions for fast quantum logic. Here we present a general purpose, quantum-enabled interface between itinerant microwave and optical light. We use a pulsed electro-optic transducer at millikelvin temperatures to demonstrate nanosecond timescale control of the converted complex mode amplitude with an input added noise of $N^{oe}_\textrm{in} = 0.16^{+0.02}_{-0.01}$ ($N^{eo}_\textrm{in} = 1.11^{+0.15}_{-0.07}$) quanta for the microwave-to-optics (reverse) direction. Operating with up to unity cooperativity, this work enters the regime of strong coupling cavity quantum electro-optics characterized by unity internal efficiency and nonlinear effects such as the observed laser cooling of a superconducting cavity mode. The high quantum cooperativity of $C_q>10$ forms the basis for deterministic entanglement generation between superconducting circuits and light.
△ Less
Submitted 17 July, 2021;
originally announced July 2021.
-
Cavity quantum electro-optics: Microwave-telecom conversion in the quantum ground state
Authors:
William Hease,
Alfredo Rueda,
Rishabh Sahu,
Matthias Wulf,
Georg Arnold,
Harald G. L. Schwefel,
Johannes M. Fink
Abstract:
Fiber optic communication is the backbone of our modern information society, offering high bandwidth, low loss, weight, size and cost, as well as an immunity to electromagnetic interference. Microwave photonics lends these advantages to electronic sensing and communication systems, but - unlike the field of nonlinear optics - electro-optic devices so far require classical modulation fields whose v…
▽ More
Fiber optic communication is the backbone of our modern information society, offering high bandwidth, low loss, weight, size and cost, as well as an immunity to electromagnetic interference. Microwave photonics lends these advantages to electronic sensing and communication systems, but - unlike the field of nonlinear optics - electro-optic devices so far require classical modulation fields whose variance is dominated by electronic or thermal noise rather than quantum fluctuations. Here we present a cavity electro-optic transceiver operating in a millikelvin environment with a mode occupancy as low as 0.025 $\pm$ 0.005 noise photons. Our system is based on a lithium niobate whispering gallery mode resonator, resonantly coupled to a superconducting microwave cavity via the Pockels effect. For the highest continuous wave pump power of 1.48 mW we demonstrate bidirectional single-sideband conversion of X band microwave to C band telecom light with a total (internal) efficiency of 0.03 % (0.7 %) and an added output conversion noise of 5.5 photons. The high bandwidth of 10.7 MHz combined with the observed very slow heating rate of 1.1 noise photons s$^{-1}$ puts quantum limited pulsed microwave-optics conversion within reach. The presented device is versatile and compatible with superconducting qubits, which might open the way for fast and deterministic entanglement distribution between microwave and optical fields, for optically mediated remote entanglement of superconducting qubits, and for new multiplexed cryogenic circuit control and readout strategies.
△ Less
Submitted 26 May, 2020;
originally announced May 2020.
-
A novel method for measurement of the refractive indices of transparent solid media using laser interferometry
Authors:
Arnab Pal,
Kriti R. Sahu,
Pradipta Panchadhyayee,
Debapriyo Syam
Abstract:
A novel method is proposed to measure the refractive indices (RIs) of the materials of different transparent solid state media. To exploit the advantage of non-contact measurement laser beam interferometry is used as an effective technique for this purpose. The RIs of materials are also experimentally determined with the aid of another laser based simple method. The derivations of the working form…
▽ More
A novel method is proposed to measure the refractive indices (RIs) of the materials of different transparent solid state media. To exploit the advantage of non-contact measurement laser beam interferometry is used as an effective technique for this purpose. The RIs of materials are also experimentally determined with the aid of another laser based simple method. The derivations of the working formulae for both the methods are presented. The experimental values of RI of any glass sample found by the different methods are consistent with each other and fall within the range of known values of RI for glass. Both types of experiments can be set up rather easily in an undergraduate laboratory. They can supplement other methods of finding refractive index like, for example, methods based on the use of a spectrometer.
△ Less
Submitted 29 February, 2020; v1 submitted 11 September, 2019;
originally announced September 2019.
-
Generation of Gaussian Schell-model fields as mixtures of their coherent modes
Authors:
Abhinandan Bhattacharjee,
Rishabh Sahu,
Anand K. Jha
Abstract:
Gaussian Schell-model fields are examples of spatially partially coherent fields, which in recent years have found several unique applications. The existing techniques for generating Gaussian Schell-model (GSM) fields are based on introducing randomness in a spatially completely coherent field and are limited in terms of control and precision with which GSM fields can be generated. In contrast, we…
▽ More
Gaussian Schell-model fields are examples of spatially partially coherent fields, which in recent years have found several unique applications. The existing techniques for generating Gaussian Schell-model (GSM) fields are based on introducing randomness in a spatially completely coherent field and are limited in terms of control and precision with which GSM fields can be generated. In contrast, we demonstrate an experimental technique that is based on the coherent mode representation of GSM fields. By generating individual coherent modes and mixing them in proportion fixed by their coherent mode representation, we experimentally demonstrate generation of several GSM fields. Since our technique involves only mixing of coherent eigenmodes and does not involve introducing randomness from outside, it provides much better control and precision with which GSM fields with a given set of parameter could be generated.
△ Less
Submitted 28 September, 2019; v1 submitted 27 August, 2018;
originally announced August 2018.
-
Chemically stabilized epitaxial wurtzite-BN thin film
Authors:
Badri Vishal,
Rajendra Singh,
Abhishek Chaturvedi,
Ankit Sharma,
M. B. Sreedhara,
Rajib Sahu,
Usha Bhat,
Upadrasta Ramamurty,
Ranjan Datta
Abstract:
We report on the chemically stabilized epitaxial w-BN thin film grown on c-plane sapphire by pulsed laser deposition under slow kinetic condition. Traces of no other allotropes such as cubic (c) or hexagonal (h) BN phases are present. Sapphire substrate plays a significant role in stabilizing the metastable w-BN from h-BN target under unusual PLD growth condition involving low temperature and pres…
▽ More
We report on the chemically stabilized epitaxial w-BN thin film grown on c-plane sapphire by pulsed laser deposition under slow kinetic condition. Traces of no other allotropes such as cubic (c) or hexagonal (h) BN phases are present. Sapphire substrate plays a significant role in stabilizing the metastable w-BN from h-BN target under unusual PLD growth condition involving low temperature and pressure and is explained based on density functional theory calculation. The hardness and the elastic modulus of the w-BN film are 37 & 339 GPa, respectively measured by indentation along <0001> direction. The results are extremely promising in advancing the microelectronic and mechanical tooling industry.
△ Less
Submitted 21 January, 2018;
originally announced January 2018.
-
Angular Lens
Authors:
Rishabh Sahu,
Swati Chaudhary,
Kedar Khare,
Mishkatul Bhattacharya,
Harshawardhan Wanare,
Anand Kumar Jha
Abstract:
We propose a single phase-only optical element that transforms different orbital angular momentum (OAM) modes into localized spots at separated angular positions on a transverse plane. We refer to this element as an angular lens since it separates out OAM modes in a manner analogous to how a converging lens separates out transverse wave-vector modes at the focal plane. We also simulate the propose…
▽ More
We propose a single phase-only optical element that transforms different orbital angular momentum (OAM) modes into localized spots at separated angular positions on a transverse plane. We refer to this element as an angular lens since it separates out OAM modes in a manner analogous to how a converging lens separates out transverse wave-vector modes at the focal plane. We also simulate the proposed angular lens using a spatial light modulator and experimentally demonstrate its working. Our work can have important implications for OAM-based classical and quantum communication applications.
△ Less
Submitted 30 June, 2018; v1 submitted 9 November, 2017;
originally announced November 2017.
-
Single-shot measurement of the orbital-angular-momentum spectrum of light
Authors:
Girish Kulkarni,
Rishabh Sahu,
Omar S. Magana-Loaiza,
Robert. W. Boyd,
Anand K. Jha
Abstract:
The existing methods for measuring the orbital-angular-momentum (OAM) spectrum suffer from issues such as poor efficiency, strict interferometric stability requirements, and too much loss. Furthermore, most techniques inevitably discard part of the field and measure only a post-selected portion of the true spectrum. Here, we propose and demonstrate an interferometric technique for measuring the tr…
▽ More
The existing methods for measuring the orbital-angular-momentum (OAM) spectrum suffer from issues such as poor efficiency, strict interferometric stability requirements, and too much loss. Furthermore, most techniques inevitably discard part of the field and measure only a post-selected portion of the true spectrum. Here, we propose and demonstrate an interferometric technique for measuring the true OAM spectrum of optical fields in a single-shot manner. Our technique directly encodes the OAM-spectrum information in the azimuthal intensity profile of the output interferogram. In the absence of noise, the spectrum can be fully decoded using a single acquisition of the output interferogram, and, in the presence of noise, acquisition of two suitable interferograms is sufficient for the purpose. As an important application of our technique, we demonstrate measurements of the angular Schmidt spectrum of the entangled photons produced by parametric down-conversion and report a broad spectrum with the angular Schmidt number 82.1.
△ Less
Submitted 21 October, 2017; v1 submitted 1 December, 2016;
originally announced December 2016.
-
Gravitational Drainage of Thin Films of Trisiloxane-(Poly)ethoxylate Superspreaders
Authors:
Soumyadip Sett,
Rakesh P. Sahu,
Suman Sinha-Ray,
Alexander Yarin
Abstract:
Gravitational drainage of vertical films supported on a wire frame of superspreader SILWET L-77 and its cousin non-superspreader SILWET L-7607 revealed drastic differences. The superspreader films showed complicated dynamic turbulent-like interferometric patterns in distinction from the ordered color bands of the cousin non-superspreader which reminded those of the ordinary surfactants. Neverthele…
▽ More
Gravitational drainage of vertical films supported on a wire frame of superspreader SILWET L-77 and its cousin non-superspreader SILWET L-7607 revealed drastic differences. The superspreader films showed complicated dynamic turbulent-like interferometric patterns in distinction from the ordered color bands of the cousin non-superspreader which reminded those of the ordinary surfactants. Nevertheless the superspreader films stabilized themselves at the thickness below 50 nm and revealed an order of magnitude longer life time before bursting compared to the cousin non-superspreader. Notably, the superspreader revealed drastic differences from the non-superspreader in aqueous solutions with no contact with any solid Teflon surface. The theoretical part of the work attributed the self-stabilization of the superspreader films to significant disjoining pressure associated with the van der Waals repulsion of the fluffy surfaces of the film formed by long superspreader bilayers hanging from the free surfaces. The non-superspreaders do not possess any significant disjoining pressure in the film with thicknesses even in the range 30-50 nm. The results show that gravitational drainage of vertical films is a useful simple tool for measuring disjoining pressure.
△ Less
Submitted 17 July, 2013;
originally announced July 2013.