Showing 1–2 of 2 results for author: Sahu, J K
-
0.82 um 105 W diode-pumped thulium-doped all silica fiber laser
Authors:
Changshun Hou,
Ziwei Zhai,
Nilotpal Choudhury,
Tom Harris,
Qiubai Yang,
Jayanta K. Sahu,
Johan Nilsson
Abstract:
An all-silica-fiber thulium-doped fiber laser emitting at 0.82 um on the transition from 3H4 to the ground state 3H6 outputs 105 W continuous-wave (CW) power and 555 W quasi-continuous-wave (QCW) instantaneous power with 0.96% duty cycle in 240-us rectangular pulses. The TDFL comprises a double-clad thulium-doped fiber (TDF) which is designed and fabricated in-house and is incorporated into an all…
▽ More
An all-silica-fiber thulium-doped fiber laser emitting at 0.82 um on the transition from 3H4 to the ground state 3H6 outputs 105 W continuous-wave (CW) power and 555 W quasi-continuous-wave (QCW) instantaneous power with 0.96% duty cycle in 240-us rectangular pulses. The TDFL comprises a double-clad thulium-doped fiber (TDF) which is designed and fabricated in-house and is incorporated into an all-fiber cavity and cladding-pumped by five pigtailed diode lasers at 0.79 um. Co-lasing at 1.9 um counteracts population trapping in 3F4. The slope efficiency relative to absorbed pump power reaches 64% QCW and 77.5% CW. QCW, the beam quality M2 becomes 2.2 (beam parameter product BPP 0.57 mm mrad) and 2.45 (BPP 0.64) in orthogonal directions at ~250 W of instantaneous output power. Additionally, a modified QCW setup is continuously wavelength-tunable from 812 nm to 835 nm. We believe this is the first reported demonstration of high-power laser operation of the 3H4 to 3H6 transition in a TDF. Given also the simplicity and other attractions of an all-silica-fiber laser with direct-diode cladding-pumping, we believe our demonstration is valuable for applications ranging from laser machining of aluminum (benefitting from an absorption peak at 0.83 um) to scientific applications including strontium-based atomic clocks and cesium-based quantum metrology.
△ Less
Submitted 14 May, 2025;
originally announced May 2025.
-
Quasi-continuous-wave-pumped thulium-doped fiber laser with 0.2 kW of instantaneous output power
Authors:
Changshun Hou,
Ziwei Zhai,
Nilotpal Choudhury,
Tom Harris,
Jayanta K. Sahu,
Johan Nilsson
Abstract:
A thulium-doped fiber laser operating quasi-continuous-wave generated 198 W of instantaneous output power in 0.2-ms pulses at 50 Hz repetition rate. The duty cycle becomes 1% and the average output power 2.0 W. This was cladding-pumped with 408 W from 0.79-um diode lasers (average pump power 4.1 W). The pump switch-on time was ~10 us at full power, with the laser exhibiting relaxation oscillations…
▽ More
A thulium-doped fiber laser operating quasi-continuous-wave generated 198 W of instantaneous output power in 0.2-ms pulses at 50 Hz repetition rate. The duty cycle becomes 1% and the average output power 2.0 W. This was cladding-pumped with 408 W from 0.79-um diode lasers (average pump power 4.1 W). The pump switch-on time was ~10 us at full power, with the laser exhibiting relaxation oscillations starting ~5 us after the start of the pumping and lasting for ~5 us. The slope efficiency with respect to absorbed pump power was 67% up to 200 W of absorbed pump power and 52% at the full 352 W of absorbed pump power. The low duty cycle simplified the heatsinking, despite the high instantaneous power and thermal load.
△ Less
Submitted 2 December, 2024;
originally announced December 2024.
