-
Mimicking large spot-scanning radiation fields for proton FLASH preclinical studies with a robotic motion platform
Authors:
Fada Guan,
Dadi Jiang,
Xiaochun Wang,
Ming Yang,
Kiminori Iga,
Yuting Li,
Lawrence Bronk,
Julianna Bronk,
Liang Wang,
Youming Guo,
Narayan Sahoo,
David R. Grosshans,
Albert C. Koong,
Xiaorong R. Zhu,
Radhe Mohan
Abstract:
Previously, a synchrotron-based horizontal proton beamline (87.2 MeV) was successfully commissioned to deliver radiation doses in FLASH and conventional dose rate modes to small fields and volumes. In this study, we developed a strategy to increase the effective radiation field size using a custom robotic motion platform to automatically shift the positions of biological samples. The beam was firs…
▽ More
Previously, a synchrotron-based horizontal proton beamline (87.2 MeV) was successfully commissioned to deliver radiation doses in FLASH and conventional dose rate modes to small fields and volumes. In this study, we developed a strategy to increase the effective radiation field size using a custom robotic motion platform to automatically shift the positions of biological samples. The beam was first broadened with a thin tungsten scatterer and shaped by customized brass collimators for irradiating cell/organoid cultures in 96-well plates (a 7-mm-diameter circle) or for irradiating mice (1-cm2 square). Motion patterns of the robotic platform were written in G-code, with 9-mm spot spacing used for the 96-well plates and 10.6-mm spacing for the mice. The accuracy of target positioning was verified with a self-leveling laser system. The dose delivered in the experimental conditions was validated with EBT-XD film attached to the 96-well plate or the back of the mouse. Our film-measured dose profiles matched Monte Carlo calculations well (1D gamma pass rate >95%). The FLASH dose rates were 113.7 Gy/s for cell/organoid irradiation and 191.3 Gy/s for mouse irradiation. These promising results indicate that this robotic platform can be used to effectively increase the field size for preclinical experiments with proton FLASH.
△ Less
Submitted 14 September, 2024;
originally announced September 2024.
-
Reconfigurable circular polarization medium frequency atomic receiver using magneto-electric effect
Authors:
Sujit Garain,
Surya Narayan Sahoo,
Ashok K Mohapatra
Abstract:
Nonlinear magnetoelectric effect(NME) in alkali atomic vapor has applications in precision magnetometry in the radio-frequency domain. We report the application of the NME in alkali atomic vapors for projective measurement of medium-frequency (MF) magnetic fields in a circular basis with an extinction ratio up to 500:1 . Utilizing a longitudinal static magnetic field, we demonstrate a high-sensiti…
▽ More
Nonlinear magnetoelectric effect(NME) in alkali atomic vapor has applications in precision magnetometry in the radio-frequency domain. We report the application of the NME in alkali atomic vapors for projective measurement of medium-frequency (MF) magnetic fields in a circular basis with an extinction ratio up to 500:1 . Utilizing a longitudinal static magnetic field, we demonstrate a high-sensitivity technique for characterizing the ellipticity of radio-frequency (RF) magnetic fields which can in turn be used for phase sensitive detection in mid frequency communication. Additionally, we demonstrate the conversion of binary phase shift keyed RF magnetic fields into amplitude modulation of generated optical fields, a versatile receiver for communication using the medium frequency band.
△ Less
Submitted 19 August, 2024;
originally announced August 2024.
-
Twisted hyperbolic van der Waals crystals for full Stokes mid-infrared polarization detection
Authors:
Nihar Ranjan Sahoo,
S. S. Jatin Prasath,
Brijesh Kumar,
Anshuman Kumar
Abstract:
Investigating the polarization properties of light in the mid-infrared (mid-IR) spectrum is crucial for molecular sensing, biomedical diagnostics, and IR imaging system technologies. Traditional methods, limited by bulky size and intricate fabrication, utilize large rotating optics for full Stokes polarization detection, impeding miniaturization and accuracy. Van der Waals materials (vdW) based de…
▽ More
Investigating the polarization properties of light in the mid-infrared (mid-IR) spectrum is crucial for molecular sensing, biomedical diagnostics, and IR imaging system technologies. Traditional methods, limited by bulky size and intricate fabrication, utilize large rotating optics for full Stokes polarization detection, impeding miniaturization and accuracy. Van der Waals materials (vdW) based devices can address these challenges due to their lithography-free fabrication, ease of integration with chip-scale platforms and room-temperature operation. This study introduces a chip-integrated polarimeter device leveraging the in-plane biaxial hyperbolic vdW crystal properties for mid-infrared light manipulation. The spatial division measurement scheme incorporates six meticulously designed linear and circular polarization filters, achieving high extinction ratios exceeding 30 dB and transmittance surpassing 50%, with fabrication tolerance of film thickness up to 100 nm. The proposed device represents a significant advancement in polarimetric detection, providing a compact, cost-effective solution and opens new avenues for on-chip mid-IR polarimetric detection in next-generation ultra-compact optical systems.
△ Less
Submitted 31 July, 2024; v1 submitted 4 March, 2024;
originally announced March 2024.
-
Exceptional point sensing via energy loss profile in a non-Hermitian system
Authors:
Parul Sharma,
Brijesh Kumar,
Nihar Ranjan Sahoo,
Anshuman Kumar
Abstract:
The heightened sensitivity observed in non-Hermitian systems at exceptional points (EPs) has garnered significant attention. Typical EP sensor implementations rely on precise measurements of spectra and importantly, for real time sensing measurements, the EP condition ceases to hold as the perturbation increases over time, thereby preventing the use of high sensitivity at the EP point. In this wor…
▽ More
The heightened sensitivity observed in non-Hermitian systems at exceptional points (EPs) has garnered significant attention. Typical EP sensor implementations rely on precise measurements of spectra and importantly, for real time sensing measurements, the EP condition ceases to hold as the perturbation increases over time, thereby preventing the use of high sensitivity at the EP point. In this work, we present an new approach to EP sensing which goes beyond these two traditional constraints. Firstly, instead of measuring the spectra, our scheme of EP based sensing is based on the observation of decay length of the optical mode in finite size gratings, which is validated via coupled mode theory as well as full wave electrodynamic simulations. Secondly, for larger perturbation strengths, the EP is spectrally shifted instead of being destroyed -- this spectral shift of the EP is calibrated and using this look-up table, we propose continuous real time detection by varying the excitation laser wavelength. As a proof of principle of our technique, we present an application to the sensing of coronavirus particles, which shows unprecedented limit of detection. These findings will contribute to the expanding field of exceptional point based sensing technologies for real time applications beyond spectral measurements.
△ Less
Submitted 16 October, 2023;
originally announced October 2023.
-
Polaritons in photonic hypercrystals of van der Waals materials
Authors:
Nihar Ranjan Sahoo,
Brijesh Kumar,
S. S. Jatin Prasath,
Aneesh Bapat,
Parul Sharma,
Anshuman Kumar
Abstract:
In-plane Hyperbolic Phonon polaritons (HPhPs) are quasiparticles formed via coupling of photons and optical phonons in in-plane hyperbolic materials and offer unique applications in sensing, thermal emitters and high resolution imaging. However, the large momentum mismatch between photons and these in-plane HPhPs has restricted their technological potential as most experimental demonstration rely…
▽ More
In-plane Hyperbolic Phonon polaritons (HPhPs) are quasiparticles formed via coupling of photons and optical phonons in in-plane hyperbolic materials and offer unique applications in sensing, thermal emitters and high resolution imaging. However, the large momentum mismatch between photons and these in-plane HPhPs has restricted their technological potential as most experimental demonstration rely on sophisticated and expensive near field detection schemes. In this work, using the example of $α-$MoO$_3$, we demonstrate that by constructing photonic hypercrystals of this material, one can not only excite these in-plane HPhPs in the far field but also tune the far field response via twisting the hypercrystal lattice with respect the lattice of $α-$MoO$_3$. Our findings will pave the way for the development of practical in-plane HPhP devices as well as provide access to new fundamental physics of such materials via conventional and well developed far field measurement techniques.
△ Less
Submitted 29 September, 2023;
originally announced September 2023.
-
The LHCb upgrade I
Authors:
LHCb collaboration,
R. Aaij,
A. S. W. Abdelmotteleb,
C. Abellan Beteta,
F. Abudinén,
C. Achard,
T. Ackernley,
B. Adeva,
M. Adinolfi,
P. Adlarson,
H. Afsharnia,
C. Agapopoulou,
C. A. Aidala,
Z. Ajaltouni,
S. Akar,
K. Akiba,
P. Albicocco,
J. Albrecht,
F. Alessio,
M. Alexander,
A. Alfonso Albero,
Z. Aliouche,
P. Alvarez Cartelle,
R. Amalric,
S. Amato
, et al. (1298 additional authors not shown)
Abstract:
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their select…
▽ More
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software.
△ Less
Submitted 10 September, 2024; v1 submitted 17 May, 2023;
originally announced May 2023.
-
A universal and stable metasurface for photonic quasi bound state in continuum coupled with two dimensional semiconductors
Authors:
Brijesh Kumar,
Anuj Kumar Singh,
Kishor K Mandal,
Parul Sharma,
Nihar Ranjan Sahoo,
Anshuman Kumar
Abstract:
Strong coupling of excitons to optical cavity modes is of immense importance to understanding the fundamental physics of quantum electrodynamics at the nanoscale as well as for practical applications in quantum information technologies. There have been several attempts at achieving strong coupling between excitons in two dimensional semiconductors such as transition metal dichalcogenides (TMDCs) a…
▽ More
Strong coupling of excitons to optical cavity modes is of immense importance to understanding the fundamental physics of quantum electrodynamics at the nanoscale as well as for practical applications in quantum information technologies. There have been several attempts at achieving strong coupling between excitons in two dimensional semiconductors such as transition metal dichalcogenides (TMDCs) and photonic quasi-bound states in the continuum (BICs). We identify two gaps in the platforms for achieving strong coupling between TMDC excitons and photonic quasi-BICs: firstly, in the studies so far, different cavity architectures have been employed for coupling to different TMDCs. This would mean that typically, the fabrication process flow for the cavities will need to be modified as one moves from one TMDC to the other, which can limit the technological progress in the field. Secondly, there has been no discussion of the impact of fabrication imperfections in the studies on strong coupling of these subsystems so far. In this work, we address these two questions by optimizing a cavity with the same architecture which can couple to the four typical TMDCs (MoS$_2$, WS$_2$, MoSe$_2$, WSe$_2$) and perform a detailed investigation on the fabrication tolerance of the associated photonic quasi-BICs and their impact on strong coupling.
△ Less
Submitted 12 December, 2022;
originally announced December 2022.
-
Intensity modulated proton arc therapy via geometry-based energy selection for ependymoma
Authors:
Wenhua Cao,
Yupeng Li,
Xiaodong Zhang,
Falk Poenisch,
Pablo Yepes,
Narayan Sahoo,
David Grosshans,
Susan McGovern,
G. Brandon Gunn,
Steven J. Frank,
Xiaorong R. Zhu
Abstract:
We developed a novel method of creating intensity modulated proton arc therapy (IMPAT) plans that uses computing resources efficiently and may offer a dosimetric benefit for patients with ependymoma or similar tumor geometries. Our IMPAT planning method consists of a geometry-based energy selection step with major scanning spot contributions as inputs computed using ray-tracing and single-Gaussian…
▽ More
We developed a novel method of creating intensity modulated proton arc therapy (IMPAT) plans that uses computing resources efficiently and may offer a dosimetric benefit for patients with ependymoma or similar tumor geometries. Our IMPAT planning method consists of a geometry-based energy selection step with major scanning spot contributions as inputs computed using ray-tracing and single-Gaussian approximation of lateral spot profiles. Based on the geometric relation of scanning spots and dose voxels, our energy selection module selects a minimum set of energy layers at each gantry angle such that each target voxel is covered by sufficient scanning spots as specified by the planner, with dose contributions above the specified threshold. Finally, IMPAT plans are generated by robustly optimizing scanning spots of the selected energy layers using a commercial proton treatment planning system. The IMPAT plan quality was assessed for four ependymoma patients. Reference three-field IMPT plans were created with similar planning objective functions and compared with the IMPAT plans. In all plans, the prescribed dose covered 95% of the clinical target volume (CTV) while maintaining similar maximum doses for the brainstem. While IMPAT and IMPT achieved comparable plan robustness, the IMPAT plans achieved better homogeneity and conformity than the IMPT plans. The IMPAT plans also exhibited higher relative biological effectiveness (RBE) enhancement than did the corresponding reference IMPT plans for the CTV in all four patients and brainstem in three of them. The proposed method demonstrated potential as an efficient technique for IMPAT planning and may offer a dosimetric benefit for patients with ependymoma or tumors in close proximity to critical organs. IMPAT plans created using this method had elevated RBE enhancement associated with increased linear energy transfer.
△ Less
Submitted 23 November, 2022;
originally announced November 2022.
-
ATHENA Detector Proposal -- A Totally Hermetic Electron Nucleus Apparatus proposed for IP6 at the Electron-Ion Collider
Authors:
ATHENA Collaboration,
J. Adam,
L. Adamczyk,
N. Agrawal,
C. Aidala,
W. Akers,
M. Alekseev,
M. M. Allen,
F. Ameli,
A. Angerami,
P. Antonioli,
N. J. Apadula,
A. Aprahamian,
W. Armstrong,
M. Arratia,
J. R. Arrington,
A. Asaturyan,
E. C. Aschenauer,
K. Augsten,
S. Aune,
K. Bailey,
C. Baldanza,
M. Bansal,
F. Barbosa,
L. Barion
, et al. (415 additional authors not shown)
Abstract:
ATHENA has been designed as a general purpose detector capable of delivering the full scientific scope of the Electron-Ion Collider. Careful technology choices provide fine tracking and momentum resolution, high performance electromagnetic and hadronic calorimetry, hadron identification over a wide kinematic range, and near-complete hermeticity. This article describes the detector design and its e…
▽ More
ATHENA has been designed as a general purpose detector capable of delivering the full scientific scope of the Electron-Ion Collider. Careful technology choices provide fine tracking and momentum resolution, high performance electromagnetic and hadronic calorimetry, hadron identification over a wide kinematic range, and near-complete hermeticity. This article describes the detector design and its expected performance in the most relevant physics channels. It includes an evaluation of detector technology choices, the technical challenges to realizing the detector and the R&D required to meet those challenges.
△ Less
Submitted 13 October, 2022;
originally announced October 2022.
-
High temperature mid-IR polarizer via natural in-plane hyperbolic Van der Waals crystals
Authors:
Nihar Ranjan Sahoo,
Saurabh Dixit,
Anuj Kumar Singh,
Sang Hoon Nam,
Nicholas X. Fang,
Anshuman Kumar
Abstract:
Integration of conventional mid to long-wavelength infrared polarizers with chip-scale platforms is restricted by their bulky size and complex fabrication. Van der Waals materials based polarizer can address these challenges due to its non-lithographic fabrication, ease of integration with chip-scale platforms, and room temperature operation. In the present work, mid-IR optical response of the sub…
▽ More
Integration of conventional mid to long-wavelength infrared polarizers with chip-scale platforms is restricted by their bulky size and complex fabrication. Van der Waals materials based polarizer can address these challenges due to its non-lithographic fabrication, ease of integration with chip-scale platforms, and room temperature operation. In the present work, mid-IR optical response of the sub-wavelength thin films of $α$-MoO$_3$ is investigated for application towards high temperature mid-IR transmission and reflection type thin film polarizer. To our knowledge, this is the first report of above room temperature mid-IR optical response of $α$-MoO$_3$ to determine the thermal stability of the proposed device. We find that our $α$-MoO$_3$ based polarizer retains high extinction ratio with peak value exceeding 10 dB, up to a temperature of 140$^{\circ}$C. We explain our experimental findings by natural in-plane hyperbolic anisotropy of $α$-MoO$_3$ in the mid-IR, high temperature X-ray diffraction and Raman spectroscopic measurements. This work opens up new avenues for naturally in-plane hyperbolic van der Waals thin-films to realize sub-wavelength IR optical components without lithographic constraints.
△ Less
Submitted 20 August, 2021; v1 submitted 19 August, 2021;
originally announced August 2021.
-
Mid infrared polarization engineering via sub-wavelength biaxial hyperbolic van der Waals crystals
Authors:
Saurabh Dixit,
Nihar Ranjan Sahoo,
Abhishek Mall,
Anshuman Kumar
Abstract:
Recently, in-plane biaxial hyperbolicity has been observed in $α$-MoO${_3}$ --a van der Waal crystal-- in the mid-infrared frequency regime. Here, we present a comprehensive theoretical analysis of thin film $α$-MoO${_3}$ for application to two mid-IR photonic devices -- a polarizer and a waveplate. We show the possibility of a significant reduction in the device footprint while maintaining an eno…
▽ More
Recently, in-plane biaxial hyperbolicity has been observed in $α$-MoO${_3}$ --a van der Waal crystal-- in the mid-infrared frequency regime. Here, we present a comprehensive theoretical analysis of thin film $α$-MoO${_3}$ for application to two mid-IR photonic devices -- a polarizer and a waveplate. We show the possibility of a significant reduction in the device footprint while maintaining an enormous extinction ratio from $α$-MoO${_3}$ based polarizers in comparison with that of conventional polarizers. Secondly, we carry out device optimization of $α$-MoO${_3}$ based waveplates with subwavelength thickness. We explain our results using natural in-plane hyperbolicity of $α$-MoO${_3}$ via analytical and full wave simulations. This work will build a foundation for miniaturization of mid-infrared photonic devices by exploiting the optical anisotropy of $α$-MoO${_3}$.
△ Less
Submitted 22 July, 2020;
originally announced July 2020.
-
Electrohydrodynamics of dielectric droplet collision with variant wettability surfaces
Authors:
Nilamani Sahoo,
Devranjan Samanta,
Purbarun Dhar
Abstract:
In this article, we report experimental and semi analytical findings to elucidate the electrohydrodynamics EHD of a dielectric liquid droplet impact on superhydrophobic SH and hydrophilic surfaces. A wide range of Weber numbers We and electro-capillary numbers Cae is covered to explore the various regimes of droplet impact EHD. We show that for a fixed We 60, droplet rebound on SH surface is suppr…
▽ More
In this article, we report experimental and semi analytical findings to elucidate the electrohydrodynamics EHD of a dielectric liquid droplet impact on superhydrophobic SH and hydrophilic surfaces. A wide range of Weber numbers We and electro-capillary numbers Cae is covered to explore the various regimes of droplet impact EHD. We show that for a fixed We 60, droplet rebound on SH surface is suppressed with increase of electric field intensity. At high Cae, instead of the usual uniform radial contraction, the droplets retract faster in orthogonal direction to the electric field and spread along the direction of the electric field. This prevents the accumulation of sufficient kinetic energy to achieve the droplet rebound phenomena. For certain values of We and Ohnesorge number Oh, droplets exhibit somersault like motion during rebound. Subsequently we propose a semi analytical model to explain the field induced rebound phenomenon on SH surfaces. Above a critical Cae 4.0, EHD instability causes fingering pattern via evolution of spire at the rim. Further, the spreading EHD on both hydrophilic and SH surfaces are discussed. On both wettability surfaces and for a fixed We, the spreading factor shows an increasing trend with increase in Cae. We have formulated an analytical model based on energy conservation to predict the maximum spreading diameter. The model predictions hold reasonably good agreement with the experimental observations. Finally, a phase map was developed to explain the post impact droplet dynamics on SH surfaces for a wide range of We and Cae.
△ Less
Submitted 23 June, 2020;
originally announced June 2020.
-
Hydrodynamics of magnetic fluid droplets on superhydrophobic surfaces
Authors:
Nilamani Sahoo,
Gargi Khurana,
Devranjan Samanta,
Purbarun Dhar
Abstract:
The study reports the aspects of postimpact hydrodynamics of ferrofluid droplets on superhydrophobic SH surfaces in the presence of a horizontal magnetic field. A wide gamut of dynamics was observed by varying the impact Weber number We, the Hartmann number Ha and the magnetic field strength manifested through the magnetic Bond number Bom. For a fixed We 60, we observed that at moderately low Bom…
▽ More
The study reports the aspects of postimpact hydrodynamics of ferrofluid droplets on superhydrophobic SH surfaces in the presence of a horizontal magnetic field. A wide gamut of dynamics was observed by varying the impact Weber number We, the Hartmann number Ha and the magnetic field strength manifested through the magnetic Bond number Bom. For a fixed We 60, we observed that at moderately low Bom 300, droplet rebound off the SH surface is suppressed. The noted We is chosen to observe various impact outcomes and to reveal the consequent ferrohydrodynamic mechanisms. We also show that ferrohydrodynamic interactions leads to asymmetric spreading, and the droplet spreads preferentially in a direction orthogonal to the magnetic field lines. We show analytically that during the retraction regime, the kinetic energy of the droplet is distributed unequally in the transverse and longitudinal directions due to the Lorentz force. This ultimately leads to suppression of droplet rebound. We study the role of Bom at fixed We 60, and observed that the liquid lamella becomes unstable at the onset of retraction phase, through nucleation of holes, their proliferation and rupture after reaching a critical thickness only on SH surfaces, but is absent on hydrophilic surfaces. We propose an analytical model to predict the onset of instability at a critical Bom. The analytical model shows that the critical Bom is a function of the impact We, and the critical Bom decreases with increasing We. We illustrate a phase map encompassing all the post impact ferrohydrodynamic phenomena on SH surfaces for a wide range of We and Bom.
△ Less
Submitted 13 January, 2020;
originally announced January 2020.
-
Computational models for the evolution of world cuisines
Authors:
Rudraksh Tuwani,
Nutan Sahoo,
Navjot Singh,
Ganesh Bagler
Abstract:
Cooking is a unique endeavor that forms the core of our cultural identity. Culinary systems across the world have evolved over a period of time in the backdrop of complex interplay of diverse sociocultural factors including geographic, climatic and genetic influences. Data-driven investigations can offer interesting insights into the structural and organizational principles of cuisines. Herein, we…
▽ More
Cooking is a unique endeavor that forms the core of our cultural identity. Culinary systems across the world have evolved over a period of time in the backdrop of complex interplay of diverse sociocultural factors including geographic, climatic and genetic influences. Data-driven investigations can offer interesting insights into the structural and organizational principles of cuisines. Herein, we use a comprehensive repertoire of 158544 recipes from 25 geo-cultural regions across the world to investigate the statistical patterns in the usage of ingredients and their categories. Further, we develop computational models for the evolution of cuisines. Our analysis reveals copy-mutation as a plausible mechanism of culinary evolution. As the world copes with the challenges of diet-linked disorders, knowledge of the key determinants of culinary evolution can drive the creation of novel recipe generation algorithms aimed at dietary interventions for better nutrition and health.
△ Less
Submitted 22 April, 2019;
originally announced April 2019.
-
Interplay of substrate inclination and wettability on droplet impact dynamics
Authors:
Nilamani Sahoo,
Gargi Khurana,
A R Harikrishnan,
Devranjan Samanta,
Purbarun Dhar
Abstract:
Experimental investigations were carried out to elucidate the role of surface wettability and inclination on the post impact dynamics of droplets. Maximum spreading diameter and spreading time were found to decrease with increasing inclination angle and normal Weber number for superhydrophobic surfaces. The experiments on SH surfaces were found to be in excellent agreement with an existing analyti…
▽ More
Experimental investigations were carried out to elucidate the role of surface wettability and inclination on the post impact dynamics of droplets. Maximum spreading diameter and spreading time were found to decrease with increasing inclination angle and normal Weber number for superhydrophobic surfaces. The experiments on SH surfaces were found to be in excellent agreement with an existing analytical model, incorporated with the modifications for the oblique impact conditions. Energy ratios and elongation factor were also measured for different inclination angles. On inclined SH surfaces, different features like arrest of secondary droplet formation, reduced pinch off at the contact line and inclination dependent elongation mechanism were observed. Contrary to SH surfaces, hydrophilic surfaces show opposite trends of maximum spreading factor and spreading time with inclination angle and normal Weber number respectively. This was due to the dominance of tangential kinetic energy over adhesion energy and gravitational potential at higher inclination angles. Finally, colloidal solutions of nanoparticles were used to elucidate slip and disjoining pressure on SH and hydrophilic surfaces, respectively. Overall, the article provides a comprehensive picture of post impact dynamics of droplets on inclined surfaces encompassing a broad spectrum of governing parameters like Reynolds number, Weber number, degree of inclination and surface wettability.
△ Less
Submitted 19 February, 2019;
originally announced February 2019.
-
Post collision hydrodynamics of droplets on cylindrical bodies of variant convexity and wettability
Authors:
Gargi Khurana,
Nilamani Sahoo,
Purbarun Dhar
Abstract:
Post impingement morphology and dynamics of water droplets on convex cylindrical surfaces has been explored experimentally. Droplet impact and post-impact feature studies have been conducted on hydrophillic and superhydrophobic cylindrical surfaces. Effects of the impact Weber number and target-to-drop diameter ratio have been studied. The post-impact hydrodynamics have been quantified using the w…
▽ More
Post impingement morphology and dynamics of water droplets on convex cylindrical surfaces has been explored experimentally. Droplet impact and post-impact feature studies have been conducted on hydrophillic and superhydrophobic cylindrical surfaces. Effects of the impact Weber number and target-to-drop diameter ratio have been studied. The post-impact hydrodynamics have been quantified using the wetting fraction, the spreading factor and nondimensional film thickness at the north pole of the target. The observations reveal that the wetting fraction and spread factor increases with an increase in the impact We and decrease in the target to drop diameter ratio. An opposite trend is noted for nondimensional film thickness at the targets north pole. It is also deduced that the spread factor is independent of the target wettability. The lamella dynamics post spreading has also been observed to be a strong function of the wettability, impact We and the diameter ratio. An analytical expression for temporal evolution of film thickness at north pole of the cylinderical target is derieved. Another theoretical model based on energy conservation for predicting the maximum wetting fraction for variant cylindrical targets in terms of the governing We and Capillary number and the experimental measurements are in good agreement with the theoretical predictions.
△ Less
Submitted 23 September, 2018;
originally announced September 2018.
