-
Viscoelasticity reduces the droplet size in mucosalivary film fragmentation during intense respiratory events
Authors:
Mogeng Li,
Youssef Saade,
Stéphane Zaleski,
Uddalok Sen,
Pallav Kant,
Detlef Lohse
Abstract:
We examine the fundamental fluid dynamical mechanisms dictating the generation of bioaerosols in the human trachea during intense respiratory events such as coughing and sneezing, with an emphasis on the role played by the mucosalivary fluid viscoelasticity. An experimental investigation of the shear-induced fragmentation of a mucosalivary-mimetic fluid in a confined geometry reveals that viscoela…
▽ More
We examine the fundamental fluid dynamical mechanisms dictating the generation of bioaerosols in the human trachea during intense respiratory events such as coughing and sneezing, with an emphasis on the role played by the mucosalivary fluid viscoelasticity. An experimental investigation of the shear-induced fragmentation of a mucosalivary-mimetic fluid in a confined geometry reveals that viscoelastic liquids undergo atomization in a manner akin to Newtonian liquids -- via the formation of bag-like structures -- which ultimately rupture through the appearance of retracting holes on the bag surface. Droplets are produced via the unstable retraction of liquid rims bounding these holes. However, in comparison to Newtonian liquids, viscoelastic bags inflate to larger sizes -- implying thinner sheets and, consequently smaller droplets upon rupture. Numerical simulations support that the smaller droplets can be attributed to the thinner sheets, with a more uniform thickness, for viscoelastic bags prior to rupture. Hence, we highlight the role of the viscoelasticity in determining the thickness of the intermediate bag-like structures, which, in turn, govern the droplet size distribution of the expelled aerosol.
△ Less
Submitted 22 May, 2025; v1 submitted 7 February, 2025;
originally announced February 2025.
-
Implementation of integral surface tension formulations in a volume of fluid framework and their applications to Marangoni flows
Authors:
Mandeep Saini,
Vatsal Sanjay,
Youssef Saade,
Detlef Lohse,
Stephane Popinet
Abstract:
Accurate numerical modeling of surface tension has been a challenging aspect of multiphase flow simulations. The integral formulation for modeling surface tension forces is known to be consistent and conservative, and to be a natural choice for the simulation of flows driven by surface tension gradients along the interface. This formulation was introduced by Popinet and Zaleski (1999) for a front-…
▽ More
Accurate numerical modeling of surface tension has been a challenging aspect of multiphase flow simulations. The integral formulation for modeling surface tension forces is known to be consistent and conservative, and to be a natural choice for the simulation of flows driven by surface tension gradients along the interface. This formulation was introduced by Popinet and Zaleski (1999) for a front-tracking method and was later extended to level set methods by Al-Saud et al. (2018). In this work, we extend the integral formulation to a volume of fluid (VOF) method for capturing the interface. In fact, we propose three different schemes distinguished by the way we calculate the geometric properties of the interface, namely curvature, tangent vector and surface fraction from VOF representation. We propose a coupled level set volume of fluid (CLSVOF) method in which we use a signed distance function coupled with VOF, a height function (HF) method in which we use the height functions calculated from VOF, and a height function to distance (HF2D) method in which we use a sign-distance function calculated from height functions. For validation, these methods are rigorously tested for several problems with constant as well as varying surface tension. It is found that from an accuracy standpoint, CLSVOF has the least numerical oscillations followed by HF2D and then HF. However, from a computational speed point of view, HF method is the fastest followed by HF2D and then CLSVOF. Therefore, the HF2D method is a good compromise between speed and accuracy for obtaining faster and correct results.
△ Less
Submitted 4 February, 2025;
originally announced February 2025.
-
Finite speed of sound effects on asymmetry in multibubble cavitation
Authors:
Mandeep Saini,
Youssef Saade,
Daniel Fuster,
Detlef Lohse
Abstract:
Three-dimensional direct numerical simulations (DNS) are used to revisit the experiments on multibubble cavitation performed by Bremond et al. (https://doi.org/10.1063/1.2396922, Phys. Fluids 18, 121505 (2006), https://doi.org/10.1103/PhysRevLett.96.224501, Phys. Rev. Lett. 96, 224501 (2006)). In particular, we aim at understanding the asymmetry observed therein during the expansion and collapse o…
▽ More
Three-dimensional direct numerical simulations (DNS) are used to revisit the experiments on multibubble cavitation performed by Bremond et al. (https://doi.org/10.1063/1.2396922, Phys. Fluids 18, 121505 (2006), https://doi.org/10.1103/PhysRevLett.96.224501, Phys. Rev. Lett. 96, 224501 (2006)). In particular, we aim at understanding the asymmetry observed therein during the expansion and collapse of bubble clusters subjected to a pressure pulse. Our numerical simulations suggest that the asymmetry is due to the force applied by the imposed pressure pulse and it is a consequence of the finite effective speed of sound in the liquid. By comparing our numerical results to the experiments, we found that the effective speed of sound under the experimental conditions was smaller than that of degassed water due to microbubbles in the system which resulted from prior cavitation experiments in the same setup. The estimated values of the effective speed of sound are consistent with those derived from the classical theory of wave propagation in liquids with small amounts of gas. To support this theory, we also present evidence of tiny bubbles remaining in the liquid bulk as a result of the fragmentation of large bubbles during the prior cavitation experiments. Furthermore, we find that this asymmetry also alters the direction of the liquid jet generated during the last stages of bubble collapse.
△ Less
Submitted 2 April, 2024;
originally announced April 2024.
-
A multigrid solver for the coupled pressure-temperature equations in an all-Mach solver with VoF
Authors:
Youssef Saade,
Detlef Lohse,
Daniel Fuster
Abstract:
We present a generalisation of the all-Mach solver of Fuster & Popinet (2018) to account for heat diffusion between two different compressible phases. By solving a two-way coupled system of equations for pressure and temperature, the current code is shown to increase the robustness and accuracy of the solver with respect to classical explicit discretization schemes. Different test cases are propos…
▽ More
We present a generalisation of the all-Mach solver of Fuster & Popinet (2018) to account for heat diffusion between two different compressible phases. By solving a two-way coupled system of equations for pressure and temperature, the current code is shown to increase the robustness and accuracy of the solver with respect to classical explicit discretization schemes. Different test cases are proposed to validate the implementation of the thermal effects: an Epstein-Plesset like problem for temperature is shown to compare well with a spectral method solution. The code also reproduces free small amplitude oscillations of a spherical bubble where analytical solutions capturing the transition between isothermal and adiabatic regimes are available. We show results of a single sonoluminescent bubble (SBSL) in standing waves, where the result of the DNS is compared with that of other methods in the literature. Moreover, the Rayleigh collapse problem is studied in order to evaluate the importance of thermal effects on the peak pressures reached during the collapse of spherical bubbles. Finally, the collapse of a bubble near a rigid boundary is studied reporting the change of heat flux as a function of the stand-off distance.
△ Less
Submitted 22 June, 2022;
originally announced June 2022.
-
Vorticity-induced flow-focusing leads to bubble entrainment in an inkjet printhead: synchrotron X-ray and volume-of-fluid visualizations
Authors:
Maaike Rump,
Youssef Saade,
Uddalok Sen,
Kamel Fezzaa,
Michel Versluis,
Detlef Lohse,
Tim Segers
Abstract:
The oscillatory flows present in an inkjet printhead can lead to strong deformations of the air-liquid interface at the nozzle exit. Such deformations may lead to an inward directed air jet with bubble pinch-off and the subsequent entrainment of an air bubble, which is highly detrimental to the stability of inkjet printing. Understanding the mechanisms of bubble entrainment is therefore crucial in…
▽ More
The oscillatory flows present in an inkjet printhead can lead to strong deformations of the air-liquid interface at the nozzle exit. Such deformations may lead to an inward directed air jet with bubble pinch-off and the subsequent entrainment of an air bubble, which is highly detrimental to the stability of inkjet printing. Understanding the mechanisms of bubble entrainment is therefore crucial in improving print stability. In the present work, we use ultrafast X-ray phase-contrast imaging and direct numerical simulations based on the Volume-of-Fluid method to study the mechanisms underlying the bubble entrainment in a piezo-acoustic printhead. We first demonstrate good agreement between experiments and numerics. We then show the different classes of bubble pinch-off obtained in experiments, and that those were also captured numerically. The numerical results are then used to show that the baroclinic torque, which is generated at the gas-liquid interface due to the misalignment of density and pressure gradients, results in a flow-focusing effect that drives the formation of the air jet from which a bubble can pinch-off.
△ Less
Submitted 8 August, 2022; v1 submitted 13 May, 2022;
originally announced May 2022.
-
Bags mediated film atomization in a cough machine
Authors:
Pallav Kant,
César Pairetti,
Youssef Saade,
Stéphane Popinet,
Stéphane Zaleski,
Detlef Lohse
Abstract:
We combine experiments and numerical computations to examine underlying fluid mechanical processes associated with bioaerosol generation during violent respiratory manoeuvres, such as coughing or sneezing. Analogous experiments performed in a cough machine -- consisting of a strong shearing airflow over a thin liquid film, allow us to illustrate the changes in film topology as it disintegrates int…
▽ More
We combine experiments and numerical computations to examine underlying fluid mechanical processes associated with bioaerosol generation during violent respiratory manoeuvres, such as coughing or sneezing. Analogous experiments performed in a cough machine -- consisting of a strong shearing airflow over a thin liquid film, allow us to illustrate the changes in film topology as it disintegrates into small droplets. We identify that aerosol generation during the shearing of the liquid film is mediated by the formation of inflated bag-like structures. The breakup of these bags is triggered by the appearance of retracting holes that puncture the bag surface. Consequently, the cascade from inflated bags to droplets is primarily controlled by the dynamics and stability of liquid rims bounding these retracting holes. We also reveal the stabilizing role of fluid viscosity that eventually leads to the generation of smaller droplets.
△ Less
Submitted 6 July, 2023; v1 submitted 28 February, 2022;
originally announced February 2022.
-
Crown formation from a cavitating bubble close to a free surface
Authors:
Youssef Saade,
Maziyar Jalaal,
Andrea Prosperetti,
Detlef Lohse
Abstract:
A rapidly growing bubble close to a free surface induces jetting: a central jet protruding outwards and a crown surrounding it at later stages. While the formation mechanism of the central jet is known and documented, that of the crown remains unsettled. We perform axisymmetric simulations of the problem using the free software program basilisk, where a finite-volume compressible solver has been i…
▽ More
A rapidly growing bubble close to a free surface induces jetting: a central jet protruding outwards and a crown surrounding it at later stages. While the formation mechanism of the central jet is known and documented, that of the crown remains unsettled. We perform axisymmetric simulations of the problem using the free software program basilisk, where a finite-volume compressible solver has been implemented, that uses a geometric Volume-of-Fluid method (VoF) for the tracking of the interface. We show that the mechanism of crown formation is a combination of a pressure distortion over the curved interface, inducing flow focusing, and of a flow reversal, caused by the second expansion of the toroidal bubble that drives the crown. The work culminates in a parametric study with the Weber number, the Reynolds number, the pressure ratio and the dimensionless bubble distance to the free surface as control parameters. Their effects on both the central jet and the crown are explored. For high Weber numbers, we observe the formation of weaker "secondary crowns", highly correlated with the third oscillation cycle of the bubble.
△ Less
Submitted 10 July, 2021;
originally announced July 2021.
-
Planar Jet Stripping of Liquid Coatings: Numerical Studies
Authors:
Wojciech Aniszewski,
Stéphane Zaleski,
Stéphane Popinet,
Youssef Saade
Abstract:
In this paper, we present a detailed example of numerical study of flm formation in the context of metal coating. Subsequently we simulate wiping of the film by a planar jet. The simulations have been performed using Basilisk, a grid-adapting, strongly optimized code. Mesh adaptation allows for arbitrary precision in relevant regions such as the contact line or the liquid-air impact zone, while co…
▽ More
In this paper, we present a detailed example of numerical study of flm formation in the context of metal coating. Subsequently we simulate wiping of the film by a planar jet. The simulations have been performed using Basilisk, a grid-adapting, strongly optimized code. Mesh adaptation allows for arbitrary precision in relevant regions such as the contact line or the liquid-air impact zone, while coarse grid is applied elsewhere. This, as the results indicate, is the only realistic approach for a numerical method to cover the wide range of necessary scales from the predicted film thickness (tens of microns) to the domain size (meters). The results suggest assumptions of laminar flow inside the film are not justified for heavy coats (liquid zinc). As for the wiping, our simulations supply a great amount of instantaneous results concerning initial film atomization as well as film thickness.
△ Less
Submitted 17 July, 2019;
originally announced July 2019.
-
Transition in a numerical model of contact line dynamics and forced dewetting
Authors:
S. Afkhami,
J. Buongiorno,
A. Guion,
S. Popinet,
Y. Saade,
R. Scardovelli,
S. Zaleski
Abstract:
We investigate the transition to a Landau-Levich-Derjaguin film in forced dewetting using a quadtree adaptive solution to the Navier-Stokes equations with surface tension. We use a discretization of the capillary forces near the receding contact line that yields an equilibrium for a specified contact angle $θ_Δ$ called the numerical contact angle. Despite the well-known contact line singularity, d…
▽ More
We investigate the transition to a Landau-Levich-Derjaguin film in forced dewetting using a quadtree adaptive solution to the Navier-Stokes equations with surface tension. We use a discretization of the capillary forces near the receding contact line that yields an equilibrium for a specified contact angle $θ_Δ$ called the numerical contact angle. Despite the well-known contact line singularity, dynamic simulations can proceed without any explicit additional numerical procedure. We investigate angles from $15^\circ$ to $110^\circ$ and capillary numbers from $0.00085$ to $0.2$ where the mesh size $Δ$ is varied in the range of $0.0035$ to $0.06$ of the capillary length $l_c$. To interpret the results, we use Cox's theory which involves a microscopic distance $r_m$ and a microscopic angle $θ_e$. In the numerical case, the equivalent of $θ_e$ is the angle $θ_Δ$ and we find that Cox's theory also applies. We introduce the scaling factor or gauge function $φ$ so that $r_m = Δ/φ$ and estimate this gauge function by comparing our numerics to Cox's theory. The comparison provides a direct assessment of the agreement of the numerics with Cox's theory and reveals a critical feature of the numerical treatment of contact line dynamics: agreement is poor at small angles while it is better at large angles. This scaling factor is shown to depend only on $θ_Δ$ and the viscosity ratio $q$. In the case of small $θ_e$, we use the prediction by Eggers [Phys. Rev. Lett., vol. 93, pp 094502, 2004] of the critical capillary number for the Landau-Levich-Derjaguin forced dewetting transition. We generalize this prediction to large $θ_e$ and arbitrary $q$ and express the critical capillary number as a function of $θ_e$ and $r_m$. An analogy can be drawn between $r_m$ and the numerical slip length.
△ Less
Submitted 27 October, 2018; v1 submitted 20 March, 2017;
originally announced March 2017.
