-
Lateral Contrast Enhancement in Tomographic Volumetric 3D-Printing via Binary Photoinhibition
Authors:
Bin Wang,
Weichao Sun Hossein Safari,
S. Kaveh Hedayati,
Jadze P. C. Narag,
Thor D. V. Christiansen,
Adrian A. Schiefler,
Henning O. Sørensen,
Jeppe R. Frisvad,
Kristoffer Almdal,
Aminul Islam,
Yi Yang
Abstract:
Tomographic volumetric 3D-printing (TVP) utilizes a nonlinear photoresponse of polymer precursor to cure all points in a three-dimensional (3D) object in parallel. A key challenge in TVP is to build up dose contrast between in-part and out-of-part points in a lateral plane, which relies on coordinated illumination from various projecting angles. This challenge has mainly been tackled by projection…
▽ More
Tomographic volumetric 3D-printing (TVP) utilizes a nonlinear photoresponse of polymer precursor to cure all points in a three-dimensional (3D) object in parallel. A key challenge in TVP is to build up dose contrast between in-part and out-of-part points in a lateral plane, which relies on coordinated illumination from various projecting angles. This challenge has mainly been tackled by projection optimization. Here we show that designing material responses to photo-excitation can be a more effective way of addressing this challenge. By introducing a secondary photo-inhibitory species that reacts to external ultraviolet (UV) stimulus, we create a binary photoinhibition (BPI) system that greatly enhances the achievable dose contrast in a lateral plane. We first show that, in theory, combining dose subtraction with sufficient projection angles can guarantee an exact mathematical reconstruction of any greyscale design. We then propose a theoretical framework for BPI, in which a single stationary state with swappable stability can be used to realize dose subtraction. We use oxygen-lophyl radical pair as an approximation to show improvements in print quality enabled by enhanced dose contrast. In situ shadowgraphy shows that BPI improves the lateral patterning with various geometric features, creating differentiable changes in refractive index within 54 um or less. We show qualitative improvements in surface features and internal hollowness in physical prints. The direct impacts of UV light on the formation of positive and negative features on vertical and lateral planes of 5 workpieces are analyzed quantitatively. We conclude that introducing BPI with UV irradiation grants us direct control over the formation of negative features on the lateral plane.
△ Less
Submitted 1 March, 2025; v1 submitted 24 March, 2023;
originally announced March 2023.
-
Polychromatic neutron phase contrast imaging of weakly absorbing samples enabled by phase retrieval
Authors:
Maja Østergaard,
Estrid Buhl Naver,
Anders Kaestner,
Peter K. Willendrup,
Annemarie Brüel,
Henning Osholm Sørensen,
Jesper Skovhus Thomsen,
Søren Schmidt,
Henning Friis Poulsen,
Luise Theil Kuhn,
Henrik Birkedal
Abstract:
We demonstrate the use of a phase retrieval technique for propagation-based phase contrast neutron imaging with a polychromatic beam. This enables imaging samples with low absorption contrast and/or improving the signal-to-noise ratio to facilitate e.g. time resolved measurements. A metal sample, designed to be close to a pure phase object, and a bone sample with canals partially filled with D2O w…
▽ More
We demonstrate the use of a phase retrieval technique for propagation-based phase contrast neutron imaging with a polychromatic beam. This enables imaging samples with low absorption contrast and/or improving the signal-to-noise ratio to facilitate e.g. time resolved measurements. A metal sample, designed to be close to a pure phase object, and a bone sample with canals partially filled with D2O were used for demonstrating the technique. These samples were imaged with a polychromatic neutron beam followed by phase retrieval. For both samples the signal-to-noise ratio were significantly improved and in case of the bone sample, the phase retrieval allowed for separation of bone and D2O, which is important for example for in situ flow experiments. The use of deuteration-contrast avoids the use of chemical contrast enhancement and makes neutron imaging an interesting complementary method to X-ray imaging of bone.
△ Less
Submitted 4 October, 2022;
originally announced October 2022.
-
Thermal history of matrix forsterite grains from Murchison based on high-resolution tomography
Authors:
Giulia Perotti,
Henning O. Sørensen,
Henning Haack,
Anja C. Andersen,
Dario Ferreira Sanchez,
Elishevah M. M. E. van Kooten,
Esther H. R. Tsai,
Kim N. Dalby,
Mirko Holler,
Daniel Grolimund,
Tue Hassenkam
Abstract:
Protoplanetary disks are dust- and gas-rich structures surrounding protostars. Depending on the distance from the protostar, this dust is thermally processed to different degrees and accreted to form bodies of varying chemical compositions. The primordial accretion processes occurring in the early protoplanetary disk such as chondrule formation and metal segregation are not well understood. One wa…
▽ More
Protoplanetary disks are dust- and gas-rich structures surrounding protostars. Depending on the distance from the protostar, this dust is thermally processed to different degrees and accreted to form bodies of varying chemical compositions. The primordial accretion processes occurring in the early protoplanetary disk such as chondrule formation and metal segregation are not well understood. One way to constrain them is to study the morphology and composition of forsteritic grains from the matrix of carbonaceous chondrites. Here, we present high-resolution ptychographic X-ray nanotomography and multimodal chemical micro-tomography (X-ray diffraction and X-ray fluorescence) to reveal the early history of forsteritic grains extracted from the matrix of the Murchison CM2.5 chondrite. The 3D electron density maps revealed, at unprecedented resolution (64~nm), spherical inclusions containing Fe-Ni, very little silica-rich glass and void caps (i.e., volumes where the electron density is consistent with conditions close to vacuum) trapped in forsterite. The presence of the voids along with the overall composition, petrological textures, and shrinkage calculations is consistent with the grains experiencing one or more heating events with peak temperatures close to the melting point of forsterite ($\sim$2100~K) and subsequently cooled and contracted, in agreement with chondrule-forming conditions.
△ Less
Submitted 14 September, 2021;
originally announced September 2021.
-
Numerical simulations of NMR relaxation in chalk using local Robin boundary conditions
Authors:
M. Ogren,
D. Jha,
S. Dobberschutz,
D. Muter,
M. Carlsson,
M. Gulliksson,
S. L. S. Stipp,
H. O. Sorensen
Abstract:
The interpretation of nuclear magnetic resonance (NMR) data is of interest in a number of fields. In Ögren [Eur. Phys. J. B (2014) 87: 255] local boundary conditions for random walk simulations of NMR relaxation in digital domains were presented. Here, we have applied those boundary conditions to large, three-dimensional (3D) porous media samples. We compared the random walk results with known sol…
▽ More
The interpretation of nuclear magnetic resonance (NMR) data is of interest in a number of fields. In Ögren [Eur. Phys. J. B (2014) 87: 255] local boundary conditions for random walk simulations of NMR relaxation in digital domains were presented. Here, we have applied those boundary conditions to large, three-dimensional (3D) porous media samples. We compared the random walk results with known solutions and then applied them to highly structured 3D domains, from images derived using synchrotron radiation CT scanning of North Sea chalk samples. As expected, there were systematic errors caused by digitalization of the pore surfaces so we quantified those errors, and by using linear local boundary conditions, we were able to significantly improve the output. We also present a technique for treating numerical data prior to input into the ESPRIT algorithm for retrieving Laplace components of time series from NMR data (commonly called $T$-inversion).
△ Less
Submitted 20 September, 2019;
originally announced September 2019.
-
Momentary increase in reactive surface area in dissolving carbonate
Authors:
Y. Yang,
M. Rogowska,
Y. Zheng,
S. Bruns,
C. Gundlash,
S. L. S. Stipp,
H. O. Sørensen
Abstract:
The quantification of surface area between mineral and reactive fluid is essential in environmental applications of reactive transport modelling. This quantity evolves with microstructures and is difficult to predict because the mechanisms for the generation and destruction of reactive surface remain elusive. The challenge of accounting for the inherent heterogeneities of natural porous media in n…
▽ More
The quantification of surface area between mineral and reactive fluid is essential in environmental applications of reactive transport modelling. This quantity evolves with microstructures and is difficult to predict because the mechanisms for the generation and destruction of reactive surface remain elusive. The challenge of accounting for the inherent heterogeneities of natural porous media in numerical simulation further complicates the problem. Here we first show a direct observation of reactive surface generation in chalk under circumneutral to alkaline pH using in situ X-ray microtomography. The momentary increase of reactive surface area cannot be explained by a change in fluid accessibility or by surface roughening stemming from mineralogical heterogeneity. We then combine greyscale nanotomography data with numerical simulations to show that similar temporal behaviour can be observed over a wide range of pH as porous media dissolve in imposed flow field. We attribute the observation to the coupling between fluid flow and mineral dissolution and argue that the extent of surface generation is strongly correlated with the advective penetration depth of reactants. To conclude, we demonstrate the applicability of using a macroscopic Damköhler number as an indicator for the phenomenon and discuss its environmental significance beyond geologic carbon storage.
△ Less
Submitted 19 September, 2017;
originally announced September 2017.
-
Retraction of dissolution front in natural porous media
Authors:
Yi Yang,
Stefan Bruns,
Melania Rogowska,
Sepideh S. Hakim,
Jörg U. Hammel,
Susan L. S. Stipp,
Henning O. Sørensen
Abstract:
The dissolution of porous materials in a flow field shapes the morphologies of many geologic landscapes. Identifying the dissolution front, the interface between the reactive and the unreactive regions in a dissolving medium, is a prerequisite for studying dissolution kinetics. Despite its fundamental importance, the dynamics of a dissolution front in an evolving natural microstructure has never b…
▽ More
The dissolution of porous materials in a flow field shapes the morphologies of many geologic landscapes. Identifying the dissolution front, the interface between the reactive and the unreactive regions in a dissolving medium, is a prerequisite for studying dissolution kinetics. Despite its fundamental importance, the dynamics of a dissolution front in an evolving natural microstructure has never been reported. Here we show an unexpected spontaneous migration of the dissolution front against the pressure gradient of a flow field. This retraction stems from the infiltration instability induced surface generation, which can lead to a reactive surface dramatically greater than the ex situ geometric surface. The results are supported by a very good agreement between observations made with real time X-ray imaging and simulations based on static images of a rock determined by nanoCT. They both show that the in situ specific surface area of natural porous media is dependent on the flow field and reflects a balancing between surface generation and destruction. The reported dynamics challenge many long-held understanding of water-rock interactions and shed light on reconciling the discrepancies between field and laboratory measurements of reaction kinetics.
△ Less
Submitted 27 March, 2017;
originally announced April 2017.
-
Direct observation of coupled geochemical and geomechanical impacts on chalk microstructural evolution under elevated CO2 pressure. Part I
Authors:
Y. Yang,
S. S. Hakim,
S. Bruns,
M. Rogowska,
S. Boehnert,
J. U. Hammel,
S. L. S. Stipp,
H. O. Sørensen
Abstract:
The dissolution of porous media in a geologic formation induced by the injection of massive amounts of CO2 can undermine the mechanical stability of the formation structure before carbon mineralization takes place. The geomechanical impact of geologic carbon storage is therefore closely related to the structural sustainability of the chosen reservoir as well as the probability of buoyancy driven C…
▽ More
The dissolution of porous media in a geologic formation induced by the injection of massive amounts of CO2 can undermine the mechanical stability of the formation structure before carbon mineralization takes place. The geomechanical impact of geologic carbon storage is therefore closely related to the structural sustainability of the chosen reservoir as well as the probability of buoyancy driven CO2 leakage through caprocks. Here we show, with a combination of ex situ nanotomography and in situ microtomography, that the presence of dissolved CO2 in water produces a homogeneous dissolution pattern in natural chalk microstructure. This pattern stems from a greater apparent solubility of chalk and therefore a greater reactive subvolume in a sample. When a porous medium dissolves homogeneously in an imposed flow field, three geomechanical effects were observed: material compaction, fracturing and grain relocation. These phenomena demonstrated distinct feedbacks to the migration of the dissolution front and severely complicated the infiltration instability problem. We conclude that the presence of dissolved CO2 makes the dissolution front less susceptible to spatial and temporal perturbations in the strongly coupled geochemical and geomechanical processes.
△ Less
Submitted 27 March, 2017;
originally announced April 2017.
-
Path selection during wormhole growth
Authors:
Y. Yang,
S. S. Hakim,
S. Bruns,
K. Uesugi,
K. N. Dalby,
S. L. S. Stipp,
H. O. Sørensen
Abstract:
Growth of wormholes in porous media can lead to self-organization of flow networks with an overwhelming geometric complexity. Despite decades of study, the mechanism by which a dominant wormhole develops its path during growth remains elusive. Here we show that the trajectory of a growing wormhole can be predicted by identifying the flowpath with a so-called minimum cumulative surface. Our theoret…
▽ More
Growth of wormholes in porous media can lead to self-organization of flow networks with an overwhelming geometric complexity. Despite decades of study, the mechanism by which a dominant wormhole develops its path during growth remains elusive. Here we show that the trajectory of a growing wormhole can be predicted by identifying the flowpath with a so-called minimum cumulative surface. Our theoretical analysis indicates that the cumulative surface determines the position of the dissolution front. We then show, using numerical simulation based on greyscale nanotomography data, that the tip of an advancing pore always follows the migration of the most far reaching dissolution front. Finally, we show the good accord between theory and the observation with in situ microtomography. Our result suggests that wormholing is a deterministic process rather than, as classical theories imply, a stochastic one that can only be analysed statistically. Our results shed new light on engineering of artificial flow systems by exploiting self-organization in natural porous materials.
△ Less
Submitted 27 March, 2017;
originally announced April 2017.
-
Detailed analysis of the lattice Boltzmann method on unstructured grids
Authors:
Marek Krzysztof Misztal,
Anier Hernandez-Garcia,
Rastin Matin,
Henning Osholm Sørensen,
Joachim Mathiesen
Abstract:
The lattice Boltzmann method has become a standard for efficiently solving problems in fluid dynamics. While unstructured grids allow for a more efficient geometrical representation of complex boundaries, the lattice Boltzmann methods is often implemented using regular grids. Here we analyze two implementations of the lattice Boltzmann method on unstructured grids, the standard forward Euler metho…
▽ More
The lattice Boltzmann method has become a standard for efficiently solving problems in fluid dynamics. While unstructured grids allow for a more efficient geometrical representation of complex boundaries, the lattice Boltzmann methods is often implemented using regular grids. Here we analyze two implementations of the lattice Boltzmann method on unstructured grids, the standard forward Euler method and the operator splitting method. We derive the evolution of the macroscopic variables by means of the Chapman-Enskog expansion, and we prove that it yields the Navier-Stokes equation and is first order accurate in terms of the temporal discretization and second order in terms of the spatial discretization. Relations between the kinetic viscosity and the integration time step are derived for both the Euler method and the operator splitting method. Finally we suggest an improved version of the bounce-back boundary condition. We test our implementations in both standard benchmark geometries and in the pore network of a real sample of a porous rock.
△ Less
Submitted 9 September, 2014;
originally announced September 2014.
