-
Global Seismic Monitoring using Operational Subsea Cable
Authors:
Mikael Mazur,
Martin Karrenbach,
Nicolas K. Fontaine,
Roland Ryf,
Valey Kamalov,
Lauren Dallachiesa,
Örn Jonsson,
Andre Anar Hlynsson,
Sigurdur Hlynsson,
Haoshuo Chen,
David Winter,
David T. Neilson,
Angel Ruiz-Angulo,
Vala Hjorleifsdottir
Abstract:
We report tele-seismic waves detection from multiple earthquakes on an operational subsea cable from Iceland to Ireland. Using per-span laser interferometry with 100km spacing, we report clear detection of S-, P- and surface waves from multiple world-wide earthquakes, enabling seismic analysis for early warning applications.
We report tele-seismic waves detection from multiple earthquakes on an operational subsea cable from Iceland to Ireland. Using per-span laser interferometry with 100km spacing, we report clear detection of S-, P- and surface waves from multiple world-wide earthquakes, enabling seismic analysis for early warning applications.
△ Less
Submitted 29 September, 2024;
originally announced September 2024.
-
Net 835-Gb/s/λ Carrier- and LO-Free 100-km Transmission Using Channel-Aware Phase Retrieval Reception
Authors:
Hanzi Huang,
Haoshuo Chen,
Qian Hu,
Di Che,
Yetian Huang,
Brian Stern,
Nicolas K. Fontaine,
Mikael Mazur,
Lauren Dallachiesa,
Roland Ryf,
Zhengxuan Li,
Yingxiong Song
Abstract:
We experimentally demonstrate the first carrier- and LO-free 800G/λ receiver enabling direct compatibility with standard coherent transmitters via phase retrieval, achieving net 835-Gb/s transmission over 100-km SMF and record 8.27-b/s/Hz net optical spectral efficiency.
We experimentally demonstrate the first carrier- and LO-free 800G/λ receiver enabling direct compatibility with standard coherent transmitters via phase retrieval, achieving net 835-Gb/s transmission over 100-km SMF and record 8.27-b/s/Hz net optical spectral efficiency.
△ Less
Submitted 10 April, 2024;
originally announced April 2024.
-
Distortion-Aware Phase Retrieval Receiver for High-Order QAM Transmission with Carrierless Intensity-Only Measurements
Authors:
Hanzi Huang,
Haoshuo Chen,
Qi Gao,
Yetian Huang,
Nicolas K. Fontaine,
Mikael Mazur,
Lauren Dallachiesa,
Roland Ryf,
Zhengxuan Li,
Yingxiong Song
Abstract:
We experimentally investigate transmitting high-order quadrature amplitude modulation (QAM) signals with carrierless and intensity-only measurements with phase retrieval (PR) receiving techniques. The intensity errors during measurement, including noise and distortions, are found to be a limiting factor for the precise convergence of the PR algorithm. To improve the PR reconstruction accuracy, we…
▽ More
We experimentally investigate transmitting high-order quadrature amplitude modulation (QAM) signals with carrierless and intensity-only measurements with phase retrieval (PR) receiving techniques. The intensity errors during measurement, including noise and distortions, are found to be a limiting factor for the precise convergence of the PR algorithm. To improve the PR reconstruction accuracy, we propose a distortion-aware PR scheme comprising both training and reconstruction stages. By estimating and emulating the distortion caused by various channel impairments, the proposed scheme enables enhanced agreement between the estimated and measured amplitudes throughout the PR iteration, thus resulting in improved reconstruction performance to support high-order QAM transmission. With the aid of proposed techniques, we experimentally demonstrate 50-GBaud 16QAM and 32QAM signals transmitting through a standard single-mode optical fiber (SSMF) span of 40 and 80 km, and achieve bit error rates (BERs) below the 6.25% hard decision (HD)-forward error correction (FEC) and 25% soft decision (SD)-FEC thresholds for the two modulation formats, respectively. By tuning the pilot symbol ratio and applying concatenated coding, we also demonstrate that a post-FEC data rate of up to 140 Gb/s can be achieved for both distances at an optimal pilot symbol ratio of 20%.
△ Less
Submitted 8 October, 2023;
originally announced October 2023.
-
Real-time Optical Network Sensing Control Plane Enabled by a Novel Sub us Response Time Fibre Sensing Control Device
Authors:
Mijail Szczerban,
Mikael Mazur,
Lauren Dallachiesa,
Haïk Mardoyan,
Sarvesh Bidkar,
Roland Ryf,
Jesse Simsarian
Abstract:
We propose and implement a novel fibre sensing control device and associated sensing control plane that effectively controls backscatter and polarization-based fibre sensing. We experimentally demonstrate in a fibre network that this device and associated control plane can achieve sub-us response time.
We propose and implement a novel fibre sensing control device and associated sensing control plane that effectively controls backscatter and polarization-based fibre sensing. We experimentally demonstrate in a fibre network that this device and associated control plane can achieve sub-us response time.
△ Less
Submitted 6 October, 2023;
originally announced October 2023.
-
Record Photon Information Efficiency with Optical Clock Transmission and Recovery of 12.5 bits/photon over an Optical Channel with 77 dB Loss
Authors:
René-Jean Essiambre,
Cheng Guo,
Sai Kanth Dacha,
Alexei Ashikhmin,
Andrea Blanco-Redondo,
Frank R. Kschischang,
Konrad Banaszek,
Matthew Weiner,
Rose Kopf,
Ian Crawley,
Mohamad H. Idjadi,
Ayed A. Sayem,
Jie Zhao,
James D. Sandoz,
Nicolas Fontaine,
Nicole Menkart,
Roland Ryf,
John Cloonan,
Michael Vasilyev,
Thomas E. Murphy,
Ellsworth C. Burrows
Abstract:
We experimentally demonstrate optical detection at 12.5~bits per incident photon, 9.4~dB higher than the theoretical limit of conventional coherent detection. A single laser transmits both data and optical clock, undergoes 77~dB of attenuation before quantum detection followed by optical clock and data recovery.
We experimentally demonstrate optical detection at 12.5~bits per incident photon, 9.4~dB higher than the theoretical limit of conventional coherent detection. A single laser transmits both data and optical clock, undergoes 77~dB of attenuation before quantum detection followed by optical clock and data recovery.
△ Less
Submitted 3 October, 2023;
originally announced October 2023.
-
Advanced Distributed Submarine Cable Monitoring and Environmental Sensing using Constant Power Probe Signals and Coherent Detection
Authors:
Mikael Mazur,
Nicolas K. Fontaine,
Megan Kelleher,
Valey Kamalov,
Roland Ryf,
Lauren Dallachiesa,
Haoshuo Chen,
David T. Neilson,
Franklyn Quinlan
Abstract:
In this work we demonstrate an FPGA-based coherent optical frequency domain reflectometry setup for cable monitoring. Using coherent detection for averaging and narrowband filtering, we significantly improve the signal-to-noise ratio (SNR) compared to traditional intensity-only techniques while also enabling continuous monitoring of phase and polarization. In addition, the probe signal has constan…
▽ More
In this work we demonstrate an FPGA-based coherent optical frequency domain reflectometry setup for cable monitoring. Using coherent detection for averaging and narrowband filtering, we significantly improve the signal-to-noise ratio (SNR) compared to traditional intensity-only techniques while also enabling continuous monitoring of phase and polarization. In addition, the probe signal has constant power, avoiding the nonlinear distortions and thereby enabling continuous use without interfering with data channels. We perform a field demonstration over a trans-oceanic cable using loopback configurations present in each repeater, demonstrating measurement SNR exceeding 30 dB for all about 80 repeaters with an averaging window of 1 second. We furthermore compare cable monitoring using coherent processing to today's solutions using power-only measurements. Our results show how transitioning to coherent technology for cable monitoring can improve sensitivity and enable new types of monitoring, exploring knowledge gained from transitioning from incoherent to coherent data transmission.
△ Less
Submitted 11 March, 2023;
originally announced March 2023.
-
Alignment of Free-Space Coupling of Few-Mode Fibre to Multi-Mode Fibre using Digital Holography
Authors:
Menno van den Hout,
Sjoerd van der Heide,
Thomas Bradley,
Amado M. Velazquez-Benitez,
Nicolas K. Fontaine,
Roland Ryf,
Haoshuo Chen,
Mikael Mazur,
Jose Enrique Antonio-López,
Juan Carlos Alvarado-Zacarias,
Rodrigo Amezcua-Correa,
Marianne Bogot-Astruc Adrian Amezcua Correa,
Pierre Sillard,
Chigo Okonkwo
Abstract:
Off-axis digital holography is used to align a few-mode fiber to a multi-mode fiber in a free-space optical setup. Alignment based on power coupling measurements alone cannot guarantee low mode-dependent loss. The proposed alignment method enables reliable fiber coupling with low mode-dependent loss and crosstalk.
Off-axis digital holography is used to align a few-mode fiber to a multi-mode fiber in a free-space optical setup. Alignment based on power coupling measurements alone cannot guarantee low mode-dependent loss. The proposed alignment method enables reliable fiber coupling with low mode-dependent loss and crosstalk.
△ Less
Submitted 24 June, 2022;
originally announced August 2022.
-
Optical Field Characterization using Off-axis Digital Holography
Authors:
Sjoerd van der Heide,
Bram van Esch,
Menno van den Hout,
Thomas Bradley,
Amado M. Velazquez-Benitez,
Nicolas K. Fontaine,
Roland Ryf,
Haoshuo Chen,
Mikael Mazur,
Jose Enrique Antonio-López,
Juan Carlos Alvarado-Zacarias,
Rodrigo Amezcua-Correa,
Chigo Okonkwo
Abstract:
Angular resolved digital holography is presented as a technique for real-time characterization of the full optical field (amplitude and phase) of space-division multiplexing components and fibers, here a 6-mode photonic-lantern is characterized.
Angular resolved digital holography is presented as a technique for real-time characterization of the full optical field (amplitude and phase) of space-division multiplexing components and fibers, here a 6-mode photonic-lantern is characterized.
△ Less
Submitted 30 January, 2022;
originally announced February 2022.
-
Impulse Response Characterization of a Commercial Multimode Fiber using Superconducting Nanowire Single-Photon Detectors
Authors:
Yuanhang Zhang,
Nicolas K. Fontaine,
Mikael Mazur,
Haoshuo Chen,
Roland Ryf,
Guifang Li,
Andrea Blanco-Redondo
Abstract:
Time-of-flight measurements are key to study distributed mode coupling and differential mode group delay (DMDG) in multimode fibers (MMFs). However, current approaches using regular photodetectors with limited sensitivity preclude the detection of weak modal interactions in such fibers masking interesting physical effects. Here we demonstrate the use of high-sensitivity superconducting nanowire si…
▽ More
Time-of-flight measurements are key to study distributed mode coupling and differential mode group delay (DMDG) in multimode fibers (MMFs). However, current approaches using regular photodetectors with limited sensitivity preclude the detection of weak modal interactions in such fibers masking interesting physical effects. Here we demonstrate the use of high-sensitivity superconducting nanowire single-photon detectors (SNSPDs) to measure the mode transfer matrix of a commercial graded-index multimode fiber. Two high performance 45-mode multi-plane light conversion (MPLC) devices served as the mode multiplexer/demultiplexer. Distributed mode coupling and DMDG among different mode groups are accurately quantified from the impulse response measurement. We also observed cladding modes of the MMF as a pedestal of the pulse in the measurement. This work paves way for applications such as quantum communications using many spatial modes of the fiber.
△ Less
Submitted 4 December, 2021; v1 submitted 29 September, 2021;
originally announced September 2021.
-
Exploiting Angular Multiplexing for Polarization-diversity in Off-axis Digital Holography
Authors:
Sjoerd van der Heide,
Rutger van Anrooij,
Menno van den Hout,
Nicolas K. Fontaine,
Roland Ryf,
Haoshuo Chen,
Mikael Mazur,
Jose Enrique Antonio-Lopez,
Juan Carlos Alvarado-Zacarias,
Ton Koonen,
Rodrigo Amezcua-Correa,
Chigo Okonkwo
Abstract:
Digital holography measures the complex optical field and transfer matrix of a device, polarization-diversity is often achieved through spatial multiplexing. We introduce angular multiplexing, to increase flexibility in the optical setup. Comparatively, similar values for cross-talk and mode-dependent loss are measured for a photonic lantern.
Digital holography measures the complex optical field and transfer matrix of a device, polarization-diversity is often achieved through spatial multiplexing. We introduce angular multiplexing, to increase flexibility in the optical setup. Comparatively, similar values for cross-talk and mode-dependent loss are measured for a photonic lantern.
△ Less
Submitted 27 October, 2020;
originally announced October 2020.
-
1.23-Tb/s per Wavelength Single-Waveguide On-Chip Optical Interconnect Enabled by Mode-division Multiplexing
Authors:
Hanzi Huang,
Yetian Huang,
Yu He,
Haoshuo Chen,
Yong Zhang,
Qianwu Zhang,
Nicolas K. Fontaine,
Roland Ryf,
Yingxiong Song,
Yikai Su
Abstract:
We experimentally demonstrate a record net capacity per wavelength of 1.23~Tb/s over a single silicon-on-insulator (SOI) multimode waveguide for optical interconnects employing on-chip mode-division multiplexing and 11$\times$11 multiple-in-multiple-out (MIMO) digital signal processing.
We experimentally demonstrate a record net capacity per wavelength of 1.23~Tb/s over a single silicon-on-insulator (SOI) multimode waveguide for optical interconnects employing on-chip mode-division multiplexing and 11$\times$11 multiple-in-multiple-out (MIMO) digital signal processing.
△ Less
Submitted 31 March, 2021; v1 submitted 17 October, 2020;
originally announced October 2020.
-
Ultrabroadband Polarization Insensitive Hybrid using Multiplane Light Conversion
Authors:
Nicolas K. Fontaine,
Yuanhang Zhang,
Haoshuo Chen,
Roland Ryf,
David T. Neilson,
Guifang Li,
Mark Cappuzzo,
Rose Kopf,
Al Tate,
Hugo Safar,
Cristian Bolle,
Mark Earnshaw,
Joel Carpenter
Abstract:
We designed, fabricated and tested an optical hybrid that supports an octave of bandwidth (900-1800 nm) and below 4-dB insertion loss using multiplane light conversion. Measured phase errors are below 3-degree across a measurement bandwidth of 390 nm.
We designed, fabricated and tested an optical hybrid that supports an octave of bandwidth (900-1800 nm) and below 4-dB insertion loss using multiplane light conversion. Measured phase errors are below 3-degree across a measurement bandwidth of 390 nm.
△ Less
Submitted 15 February, 2020;
originally announced February 2020.
-
Time reversed optical waves by arbitrary vector spatiotemporal field generation
Authors:
Mickael Mounaix,
Nicolas K. Fontaine,
David T. Neilson,
Roland Ryf,
Haoshuo Chen,
Juan Carlos Alvarado-Zacarias,
Joel Carpenter
Abstract:
Lossless linear wave propagation is symmetric in time, a principle which can be used to create time reversed waves. Such waves are special 'pre-scattered' spatiotemporal fields, which propagate through a complex medium as if observing a scattering process in reverse, entering the medium as a complicated spatiotemporal field and arriving after propagation as a desired target field, such as a spatio…
▽ More
Lossless linear wave propagation is symmetric in time, a principle which can be used to create time reversed waves. Such waves are special 'pre-scattered' spatiotemporal fields, which propagate through a complex medium as if observing a scattering process in reverse, entering the medium as a complicated spatiotemporal field and arriving after propagation as a desired target field, such as a spatiotemporal focus. Time reversed waves have previously been demonstrated for relatively low frequency phenomena such as acoustics, water waves and microwaves. Many attempts have been made to extend these techniques into optics. However, the much higher frequencies of optics make for very different requirements. A fully time reversed wave is a volumetric field with arbitrary amplitude, phase and polarisation at every point in space and time. The creation of such fields has not previously been possible in optics. We demonstrate time reversed optical waves with a device capable of independently controlling all of light's classical degrees of freedom simultaneously. Such a class of ultrafast wavefront shaper is capable of generating a sequence of arbitrary 2D spatial/polarisation wavefronts at a bandwidth limited rate of 4.4 THz. This ability to manipulate the full field of an optical beam could be used to control both linear and nonlinear optical phenomena.
△ Less
Submitted 19 November, 2020; v1 submitted 16 September, 2019;
originally announced September 2019.
-
Multi-wavelength arbitrary waveform generation through spectro-temporal unitary transformations
Authors:
Mikael Mazur,
Nicolas K. Fontaine,
Haoshuo Chen,
Roland Ryf,
David T. Neilson,
Gregory Raybon,
Andrew Adamiecki,
Steve Corteselli,
Jochen Schröder
Abstract:
Temporal waveform manipulation is a fundamental functionality in optics and crucial for applications like optical communications, microwave photonics and quantum optics. Traditional IQ- or phase-amplitude modulators shape light by carving energy from the input lightwave and are thus fundamentally lossy, and cannot apply independent modulation to multiple input wavelengths simultaneously. Taking in…
▽ More
Temporal waveform manipulation is a fundamental functionality in optics and crucial for applications like optical communications, microwave photonics and quantum optics. Traditional IQ- or phase-amplitude modulators shape light by carving energy from the input lightwave and are thus fundamentally lossy, and cannot apply independent modulation to multiple input wavelengths simultaneously. Taking inspiration from the space-time duality, we produce arbitrary unitary spectro-temporal transformations on multiple temporal input vectors with a modulation structure comprising of only lossless phase modulation and dispersive allpass filtering. The bandwidth of the output waveforms is not restricted by the driving electronics and independent transformations can be performed simultaneously on multiple orthogonal inputs such as spectrally separated frequency tones. This overcomes the main limitations of traditional electro-optic modulators and offers fundamental new insight into temporal wave manipulation.
△ Less
Submitted 12 December, 2019; v1 submitted 2 July, 2019;
originally announced July 2019.
-
Laguerre-Gaussian mode sorter
Authors:
Nicolas K. Fontaine,
Roland Ryf,
Haoshuo Chen,
David T. Neilson,
Kwangwoong Kim,
Joel Carpenter
Abstract:
Light's spatial properties represent an infinite state space, making it attractive for applications requiring high dimensionality, such as quantum mechanics and classical telecommunications, but also inherently spatial applications such as imaging and sensing. However, there is no demultiplexing device in the spatial domain comparable to a grating or calcite for the wavelength and polarisation dom…
▽ More
Light's spatial properties represent an infinite state space, making it attractive for applications requiring high dimensionality, such as quantum mechanics and classical telecommunications, but also inherently spatial applications such as imaging and sensing. However, there is no demultiplexing device in the spatial domain comparable to a grating or calcite for the wavelength and polarisation domains respectively. Specifically, a simple device capable of splitting a finite beam into a large number of discrete spatially separated spots each containing a single orthogonal spatial component. We demonstrate a device capable of decomposing a beam into a Cartesian grid of identical Gaussian spots each containing a single Laguerre-Gaussian component. This is the first device capable of decomposing the azimuthal and radial components simultaneously, and is based on a single spatial light modulator and mirror. We demonstrate over 210 spatial components, meaning it is also the highest dimensionality mode multiplexer of any kind.
△ Less
Submitted 31 August, 2018; v1 submitted 12 March, 2018;
originally announced March 2018.
-
Integrated cladding-pumped multi-core, few-mode erbium-doped fibre amplifier for space-division multiplexed communications
Authors:
H. Chen,
C. Jin,
B. Huang,
N. K. Fontaine,
R. Ryf,
K. Shang,
N. Grégoire,
S. Morency,
R. -J. Essiambre,
G. Li,
Y. Messaddeq,
S. LaRochelle
Abstract:
Space-division multiplexing (SDM), whereby multiple spatial channels in multimode and multicore optical fibers are used to increase the total transmission capacity per fiber, is being investigated to avert a data capacity crunch and reduce the cost per transmitted bit. With the number of channels employed in SDM transmission experiments continuing to rise, there is a requirement for integrated SDM…
▽ More
Space-division multiplexing (SDM), whereby multiple spatial channels in multimode and multicore optical fibers are used to increase the total transmission capacity per fiber, is being investigated to avert a data capacity crunch and reduce the cost per transmitted bit. With the number of channels employed in SDM transmission experiments continuing to rise, there is a requirement for integrated SDM components that are scalable. Here, we demonstrate a cladding-pumped SDM erbium-doped fiber amplifier (EDFA) that consists of six uncoupled multimode erbium-doped cores. Each core supports three spatial modes, which enables the EDFA to amplify a total of 18 spatial channels simultaneously with a single pump diode and a complexity similar to a single-mode EDFA. The amplifier delivers more than 20-dBm total output power per core and less than 7-dB noise figure over the C-band. This cladding-pumped EDFA enables combined space-division and wavelength-division multiplexed transmission over multiple multimode fiber spans.
△ Less
Submitted 19 March, 2017;
originally announced March 2017.
