Showing 1–14 of 14 results for author: Rubio, M

Stability analysis of the flow in a coflowing device

Authors: M. Rubio, S. Rodríguez-Aparicio, M. G. Cabezas, J. M. Montanero, M. A. Herrada

Abstract: We analyze the stability of the coflow configuration. The experiments and the global stability analysis show that the emitted jet always destabilizes before the tapering conical meniscus. This implies that the parameter conditions at which polydisperse dripping arises cannot be determined from the linear stability analysis of the steady jetting mode. Transient simulations show that the linear supe… ▽ More We analyze the stability of the coflow configuration. The experiments and the global stability analysis show that the emitted jet always destabilizes before the tapering conical meniscus. This implies that the parameter conditions at which polydisperse dripping arises cannot be determined from the linear stability analysis of the steady jetting mode. Transient simulations show that the linear superposition of decaying eigenmodes triggered by an initial perturbation can lead to the jet breakup. The breakup process significantly depends on the initial perturbation. These results question the validity of the linear stability analysis as applied to the coflowing and other similar configurations. △ Less

Submitted 17 June, 2025; originally announced June 2025.

Integrating in-situ Shear Rheology with Neutron Reflectometry for Structural and Dynamic Analysis of Interfacial Systems

Authors: P. Sanchez-Puga, J. Carrascosa-Tejedor, K. C. Batchu, J. Tajuelo, M. A. Rubio, P. Gutfreund, A. Maestro

Abstract: The study of the structure and mechanical properties of complex fluid interfaces has gained increasing interest in recent decades as a result of its significant scientific relevance to the understanding of biological systems, drug development, and industrial applications. The in situ combination of molecular-level structural measurements with the assessment of dynamical (rheological) properties is… ▽ More The study of the structure and mechanical properties of complex fluid interfaces has gained increasing interest in recent decades as a result of its significant scientific relevance to the understanding of biological systems, drug development, and industrial applications. The in situ combination of molecular-level structural measurements with the assessment of dynamical (rheological) properties is particularly valuable, as comparing measurements conducted on separate samples under challenging-to-reproduce experimental conditions can be problematic. In this work, we present a new sample environment at the FIGARO instrument, the horizontal neutron reflectometer at the Institut Laue-Langevin, which includes an interfacial shear rheometer operating in the Double Wall-Ring (DWR) geometry, compatible with commercial rotational rheometers. This innovative setup enables simultaneous structural (neutron reflectometry) and dynamical (shear interfacial rheology) measurements on the same sample. △ Less

Submitted 7 November, 2024; originally announced November 2024.

DWR-Drag: A new generation software for the Double Wall-Ring Interfacial Shear Rheometer's data analysis

Authors: P. Sanchez-Puga, Miguel A. Rubio

Abstract: The double wall-ring (DWR) rotational configuration is nowadays the instrument of choice regarding interfacial shear rheometers (ISR) in rotational configurations. Complex numerical schemes must be used in the analysis of the output data in order to appropriately deal with the coupling between interfacial and bulk fluid flows, and to separate viscous and elastic contribution or the interfacial res… ▽ More The double wall-ring (DWR) rotational configuration is nowadays the instrument of choice regarding interfacial shear rheometers (ISR) in rotational configurations. Complex numerical schemes must be used in the analysis of the output data in order to appropriately deal with the coupling between interfacial and bulk fluid flows, and to separate viscous and elastic contribution or the interfacial response. We present a second generation code for analyzing the interfacial shear rheology experimental results of small amplitude oscillatory measurements made with a DWR rotational rheometer. The package presented here improves significantly the accuracy and applicability range of the previous available software packages by implementing: i) a physically motivated iterative scheme based on the probe's equation of motion, ii) an increased user selectable spatial resolution, and iii) a second order approximation for the velocity gradients at the ring surfaces. Moreover, the optimization of the computational effort allows, in many cases, for on-the-fly execution during data acquisition in real experiments. △ Less

Submitted 28 August, 2024; originally announced August 2024.

The role of charge relaxation in electrified tip streaming

Authors: M. Rubio, P. Rodríguez-Díaz, J. M. López-Herrera, M. A. Herrada, A. M. Gañán-Calvo, J. M. Montanero

Abstract: We study experimentally and numerically the onset of tip streaming in an electrified droplet. The experiments show that, for a sufficiently small dimensionless conductivity, the droplet apex oscillates before ejecting a liquid jet. This effect is caused by the limited charge transfer from the bulk to the interface. This reduces the electrostatic pressure at the droplet's stretching tip, preventing… ▽ More We study experimentally and numerically the onset of tip streaming in an electrified droplet. The experiments show that, for a sufficiently small dimensionless conductivity, the droplet apex oscillates before ejecting a liquid jet. This effect is caused by the limited charge transfer from the bulk to the interface. This reduces the electrostatic pressure at the droplet's stretching tip, preventing liquid ejection. This reduction of electrostatic pressure is compensated for by the electric shear stress arising during the apex oscillations, which eventually leads to the jet formation. The stability limit calculated from the global stability analysis perfectly agrees with the experimental results. However, this analysis predicts non-oscillatory, non-localized instability in all the cases, suggesting that both the oscillatory behavior and the small local scale characterizing tip streaming arise during the nonlinear droplet deformation. △ Less

Submitted 12 December, 2022; originally announced December 2022.

Comments: 8 pages, 12 figures

Short-time dynamics in active systems: the Vicsek model

Authors: M. Leticia Rubio Puzzo, Ernesto S. Loscar, Andres De Virgiliis, Tomas S. Grigera

Abstract: We study the short-time dynamics (STD) of the Vicsek model with vector noise. The study of STD has proved to be very useful in the determination of the critical point, critical exponents, and spinodal points in equilibrium phase transitions. Here we aim to test its applicability in active systems. We find that, despite the essential non-equilibrium characteristics of the VM (absence of detailed ba… ▽ More We study the short-time dynamics (STD) of the Vicsek model with vector noise. The study of STD has proved to be very useful in the determination of the critical point, critical exponents, and spinodal points in equilibrium phase transitions. Here we aim to test its applicability in active systems. We find that, despite the essential non-equilibrium characteristics of the VM (absence of detailed balance, activity), the STD presents qualitatively the same phenomenology as in equilibrium systems. From the STD one can distinguish whether the transition is continuous or discontinuous (which we have checked also computing the Binder cumulant). When the transition is continuous, one can determine the critical point and the critical exponents. △ Less

Submitted 9 May, 2022; originally announced May 2022.

Comments: 12 pages, 5 figures

Effect of an axial electric field on the breakup of a leaky-dielectric liquid filament

Authors: M. Rubio, A. Ponce-Torres, M. A. Herrada, A. M. Gañán-Calvo, J. M. Montanero

Abstract: We study experimentally and numerically the thinning of a Newtonian leaky-dielectric filament subject to an axial electric field. We consider moderately viscous liquids with high permittivity. The experiments show that satellite droplets are produced from the breakup of the filaments with high electrical permittivity due to the action of the electric field. Two electrified filaments with the same… ▽ More We study experimentally and numerically the thinning of a Newtonian leaky-dielectric filament subject to an axial electric field. We consider moderately viscous liquids with high permittivity. The experiments show that satellite droplets are produced from the breakup of the filaments with high electrical permittivity due to the action of the electric field. Two electrified filaments with the same minimum radius thin at the same speed regardless of when the voltage was applied. The numerical simulations show that the polarization stress is responsible for the pinching delay observed in the experiments. Asymptotically close to the pinching point, the filament pinching is dominated by the diverging hydrodynamic forces. The polarization stress becomes subdominant even if this stress also diverges at this finite-time singularity. △ Less

Submitted 23 July, 2021; originally announced July 2021.

Disruptive effects of chlorpyrifos on predator-prey interactions of Ceratophrys ornata tadpoles: consequences at the population level using computational modeling

Authors: Carolina Salgado Costa, Federico Rimoldi, Morena J. Pantucci Saraleguia, M. Leticia Rubio Puzzo, Vance L. Trudeau, Guillermo S. Natale

Abstract: Large-scale ecotoxicological studies have technical and ethical limitations, both related to the need to expose individuals to potentially harmful compounds. Computational modeling is a complementary useful and predictive tool that overcomes these limitations. Considering the increasing interest in the effects of pesticides on behavioral traits, the aim of this study was to evaluate the effects of… ▽ More Large-scale ecotoxicological studies have technical and ethical limitations, both related to the need to expose individuals to potentially harmful compounds. Computational modeling is a complementary useful and predictive tool that overcomes these limitations. Considering the increasing interest in the effects of pesticides on behavioral traits, the aim of this study was to evaluate the effects of chlorpyrifos (CPF) on intra- and inter-specific interactions of anuran tadpoles, complementing traditional ecotoxicological tools with a theoretical analysis verified by computational simulations. Experiments were developed under two consecutive phases: a first phase of exposure, and a second phase of interactions. The second phase consisted of evaluating the effects of CPF on intra- and inter-specific interactions of exposed C. ornata (Co) tadpoles acting as predators and unexposed Rhinella fernandezae (Rf) tadpoles acting as prey, under different predator-prey proportions. Also, intraspecific interactions of three Co tadpoles under different conditions of exposure were evaluated. During the exposure phase, chlorpyrifos induced significant mortality from 48h, irregular swimming, tail flexure, and the presence of subcutaneous air. Also, it induced effects on the sounds emitted after 96h of exposure, registering less number of pulses and higher dominant frequencies, and altered intra- and inter-specific interactions. During the interaction phase, the larvae continued to show sound effects, however, the antipredator mechanism continued to be operating and efficient. Finally, it was possible to model the behavior of the larvae under the effects of chlorpyrifos. We conclude that experimental data and computational modeling matched within errors. Therefore, computational simulation is a valuable ecotoxicological tool that provides new information and allows predicting natural processes. △ Less

Submitted 25 May, 2021; originally announced May 2021.

Comments: 24 pages, 3 figures, and 2 supplementary figures

Journal ref: Environmental Pollution 285 (2021) 11734

Global stability analysis of axisymmetric liquid-liquid flow focusing

Authors: M. G. Cabezas, N. Rebollo-Muñoz, M. Rubio, M. A. Herrada, J. M. Montanero

Abstract: We analyze both numerically and experimentally the stability of the steady jetting tip streaming produced by focusing a liquid stream with another liquid current when they coflow through the orifice of an axisymmetric nozzle. We calculate the global eigenmodes characterizing the response of this configuration to small-amplitude perturbations. In this way, the critical conditions leading to the ins… ▽ More We analyze both numerically and experimentally the stability of the steady jetting tip streaming produced by focusing a liquid stream with another liquid current when they coflow through the orifice of an axisymmetric nozzle. We calculate the global eigenmodes characterizing the response of this configuration to small-amplitude perturbations. In this way, the critical conditions leading to the instability of the steady jetting tip streaming are determined. The unstable perturbations are classified according to their oscillatory character and to the region where they are originated (convective and absolute instability). We derive and explain in terms of the velocity field a simple scaling law to predict the diameter of the emitted jet. The numerical stability limits are compared with experimental results finding reasonable agreement. The experiments confirm the existence of the two instability mechanisms predicted by the global stability analysis. △ Less

Submitted 22 September, 2020; originally announced September 2020.

Breakup of an electrified viscoelastic liquid bridge

Authors: Manuel Rubio, Emilio J. Vega, Miguel A. Herrada, José M. Montanero, Francisco J. Galindo-Rosales

Abstract: We study both numerically and experimentally the breakup of a viscoelastic liquid bridge between two parallel electrodes. We solve the leaky-dielectric FENE-P model to describe the dynamical response of the liquid bridge under isothermal conditions. The results show that the surface charge screens the inner electric field perpendicular to the free surface over the entire dynamical process. The liq… ▽ More We study both numerically and experimentally the breakup of a viscoelastic liquid bridge between two parallel electrodes. We solve the leaky-dielectric FENE-P model to describe the dynamical response of the liquid bridge under isothermal conditions. The results show that the surface charge screens the inner electric field perpendicular to the free surface over the entire dynamical process. The liquid bridge deformation produces a normal electric field on the outer side of the free surface that is commensurate with the axial one. The surface conduction does not significantly affect the current intensity in the time interval analyzed in the experiments. The force due to the shear electric stress becomes comparable to both the viscoelastic and surface tension forces in the last stage of the filament. However, it does not alter the elasto-capillary balance in the filament. The extensional relaxation times approximately coincides with the stress relaxation time prescribed in the FENE-P model. We measure experimentally the filament electrical conductivity and extensional relaxation time for PEO dissolved in deionized water and in a mixture of water and glycerine. We compare the filament electrical conductivity with the value measured in hydrostatic conditions for the same estimated temperature. Good agreement was found for PEO dissolved in water+glycerine, which indicates that the change of the filament microscopic structure due to the presence of stretched polymeric chains does not significantly alter the ion mobility in the stretching direction. Significant deviations are found for PEO dissolved in deionized water that may be attributed to the heat transferred to the ambient, neglected in the calculation of the filament temperature. The extensional relaxation time measured from the images acquired during the filament thinning hardly depends on the applied voltage. △ Less

Submitted 30 July, 2020; originally announced July 2020.

Journal ref: Phys. Rev. E 102, 033103 (2020)

Influence of the surface viscous stress on the pinch-off of free surfaces loaded with nearly-inviscid surfactants

Authors: A. Ponce-Torres, M. Rubio, M. A. Herrada, J. Eggers, J. M. Montanero

Abstract: We analyze both theoretically and experimentally the breakup of a pendant water droplet loaded with Sodium Dodecyl Sulfate (SDS). The free surface minimum radius measured in the experiments is compared with that obtained from a numerical solution of the full Navier-Stokes equations for different values of the shear and dilatational surface viscosities. This comparison shows the small but measurabl… ▽ More We analyze both theoretically and experimentally the breakup of a pendant water droplet loaded with Sodium Dodecyl Sulfate (SDS). The free surface minimum radius measured in the experiments is compared with that obtained from a numerical solution of the full Navier-Stokes equations for different values of the shear and dilatational surface viscosities. This comparison shows the small but measurable effect of the surface viscous stresses on the system dynamics for sufficiently small spatiotemporal distances from the breakup point, and allows to establish upper bounds for the values of the shear and dilatational viscosities. We study numerically the distribution of Marangoni and viscous stresses over the free surface as a function of the time to the pinching, and describe how surface viscous stresses grow in the pinching region as the free surface approaches its breakup. When Marangoni and surface viscosity stresses are taken into account, the surfactant is not swept away from the thread neck in the time interval analyzed. Surface viscous stresses eventually balance the driving capillary pressure in that region for small enough values of the time to pinching. Based on this result, we propose a scaling law to account for the effect of the surface viscosities on the last stage of the temporal evolution of the neck radius. △ Less

Submitted 9 April, 2020; originally announced April 2020.

Journal ref: Sci Rep 10, 16065 (2020)

Collective dynamics of pedestrians in a non-panic evacuation scenario

Authors: Juan Cruz Moreno, M. Leticia Rubio Puzzo, Wolfgang Paul

Abstract: We present a study of pedestrian motion along a corridor in a non-panic regime (e.g., schools, hospitals or airports). Such situations have been discussed so far within the Social Force Model (SFM). We suggest to enrich this model by interactions based on the velocity of the particles and some randomness, both of which we introduce using the ideas of the Vicsek Model (VM). This new model allows to… ▽ More We present a study of pedestrian motion along a corridor in a non-panic regime (e.g., schools, hospitals or airports). Such situations have been discussed so far within the Social Force Model (SFM). We suggest to enrich this model by interactions based on the velocity of the particles and some randomness, both of which we introduce using the ideas of the Vicsek Model (VM). This new model allows to introduce fluctuations for a given average speed and geometry, and considering that the alignment interactions are modulated by an external control parameter (the noise $η$) allows to introduce phase transitions between ordered and disordered states. We have compared simulations of pedestrian motion along a corridor using (a) the VM with two boundary conditions (periodic and bouncing back) and with or without desired direction of motion, (b) the SFM, and (c) the new model SFM+VM. The study of steady-state configurations in the VM with confined geometry shows the expected bands perpendicular to the motion direction, while in the SFM and SFM+VM particles order in stripes of a given width $w$ along the direction of motion. The results in the SFM+VM case show that $w(t)\simeq t^α$ has a diffusive-like behavior at low noise $η$ (dynamic exponent $α\approx 1/2$), while it is sub-diffusive at high values of external noise ($α\approx 1/4$). We observe the order-disorder transition in the VM with both boundary conditions, but the application of a desired direction condition inhibits the existence of disorder as expected. For the SFM+VM case we find a susceptibility maximum which increases with system size as a function of noise strength indicative of a order-disorder transition in the whole range of densities and speeds studied. From our results we conclude that the new SFM+VM model is a well-suited model to describe non-panic evacuation with diverse degrees of disorder. △ Less

Submitted 4 December, 2019; originally announced December 2019.

Comments: 8 pages, 7 figures

MSC Class: 62

BiconeDrag - A data processing application for the oscillating conical bob interfacial shear rheometer

Authors: Pablo Sánchez-Puga, Javier Tajuelo, Juan Manuel Pastor, Miguel A. Rubio

Abstract: BiconeDrag is a software package that allows one to perform a flow field based data processing of dynamic interfacial rheology data pertaining to surfactant laden air-fluid interfaces obtained by means of a rotational bicone shear rheometer. MATLAB and Python versions of the program are provided. The bicone fixture is widely used to transform a conventional bulk rotational rheometer into an interf… ▽ More BiconeDrag is a software package that allows one to perform a flow field based data processing of dynamic interfacial rheology data pertaining to surfactant laden air-fluid interfaces obtained by means of a rotational bicone shear rheometer. MATLAB and Python versions of the program are provided. The bicone fixture is widely used to transform a conventional bulk rotational rheometer into an interfacial shear rheometer. Typically, such systems are made of a bicone bob, which is mounted on the rheometer rotor, and a cylindrical cup. Usually, the experiment consists of measuring the response of the interface under an oscillatory stress. The program takes the values of the torque/angular displacement amplitude ratio and phase difference to compute the interfacial dynamic moduli (or complex viscosity) by consistently taking into account the hydrodynamic flow both at the interface and the subphase. This is done by numerically solving the Navier-Stokes equations for the subphase velocity field together with the Boussinesq-Scriven boundary condition at the interface, and no slip boundary conditions elsewhere. Furthermore, the program implements a new iterative scheme devised by solving for the complex Boussinesq number in the rotor's torque balance equation. △ Less

Submitted 3 October, 2018; originally announced October 2018.

Improvements to Inference Compilation for Probabilistic Programming in Large-Scale Scientific Simulators

Authors: Mario Lezcano Casado, Atilim Gunes Baydin, David Martinez Rubio, Tuan Anh Le, Frank Wood, Lukas Heinrich, Gilles Louppe, Kyle Cranmer, Karen Ng, Wahid Bhimji, Prabhat

Abstract: We consider the problem of Bayesian inference in the family of probabilistic models implicitly defined by stochastic generative models of data. In scientific fields ranging from population biology to cosmology, low-level mechanistic components are composed to create complex generative models. These models lead to intractable likelihoods and are typically non-differentiable, which poses challenges… ▽ More We consider the problem of Bayesian inference in the family of probabilistic models implicitly defined by stochastic generative models of data. In scientific fields ranging from population biology to cosmology, low-level mechanistic components are composed to create complex generative models. These models lead to intractable likelihoods and are typically non-differentiable, which poses challenges for traditional approaches to inference. We extend previous work in "inference compilation", which combines universal probabilistic programming and deep learning methods, to large-scale scientific simulators, and introduce a C++ based probabilistic programming library called CPProb. We successfully use CPProb to interface with SHERPA, a large code-base used in particle physics. Here we describe the technical innovations realized and planned for this library. △ Less

Submitted 21 December, 2017; originally announced December 2017.

Comments: 7 pages, 2 figures

MSC Class: 68T37; 68T05; 62P35 ACM Class: G.3; I.2.6; J.2

A Molecular Study of CaCO$_3$ cluster configurations

Authors: Ángeles Fernández-González, Lucas Fernández-Seivane, Manuel Prieto Rubio, Jaime Ferrer

Abstract: Equilibrium relationships involving solids are based on bulk thermodynamic properties that concern ideal crystals of infinite size. However, real processes towards equilibrium imply development of finite molecular-scale entities. The configuration of these early-stage clusters and the estimation of their excess energies with respect to the ideal crystal are keys to understanding the macroscopic be… ▽ More Equilibrium relationships involving solids are based on bulk thermodynamic properties that concern ideal crystals of infinite size. However, real processes towards equilibrium imply development of finite molecular-scale entities. The configuration of these early-stage clusters and the estimation of their excess energies with respect to the ideal crystal are keys to understanding the macroscopic behaviour of a given system. As nucleation events are difficult to study experimentally, both because they occur spontaneously and because the nucleus size is very small, atomistic simulations are a suitable tool for understanding the early stages of crystallisation. Here, starting from the ideal atomic positions in calcite and aragonite, the relaxation in vacuum of finite clusters of CaCO$_3$ is explored. Nucleation and growth of calcium carbonate phases constitute a very important subject of research in a wide variety of fields. A complete study of CaCO$_3$ should include many different aspects: size and shape of the critical nuclei under diverse conditions, possibility of nucleation from precursor phases, nucleus energy and nucleus surface energy, relationship nucleus-substrate in heterogeneous nucleation...We present a preliminary study of nucleation of calcium carbonate where nuclei are considered to be isolated from any previous phase or substrate. Even when this situation does in no way represent realistic conditions, it can be a helpful first approach to more complex studies. △ Less

Submitted 26 May, 2011; originally announced May 2011.

Comments: 4 pages, 6 figures