Showing 1–50 of 260 results for author: Roy, S

A label-free sub-diffractive technique for 3D intracellular tomography using thermally induced convection currents

Authors: Jayesh Goswami, Shataneek Banerjee, Snigdhadev Chakraborty, Srestha Roy, Atanu Ghosh, Mrutyunjaya Rath, Agniva Das, Mukul Sagar, Krishna Kumari Swain, Prasanta Pal, Basudev Roy

Abstract: Conventionally, 3-dimensional cellular tomography can be done with light sheet or multi-angle observations. Recently, a new technique was introduced where the cell was rotated using convection currents to visualize the outer periphery (Liu et al., Nano Lett., 2023, 23, 5148). However, the work falls short of actually observing intracellular objects like organelles etc. In this manuscript, we modif… ▽ More Conventionally, 3-dimensional cellular tomography can be done with light sheet or multi-angle observations. Recently, a new technique was introduced where the cell was rotated using convection currents to visualize the outer periphery (Liu et al., Nano Lett., 2023, 23, 5148). However, the work falls short of actually observing intracellular objects like organelles etc. In this manuscript, we modify the technique by relying on computer vision algorithm called Contrast Limited Adaptive Histogram Equalisation (CLAHE) to improve the contrast for better detection of intra-cellular points, and then use optical flow detection technique to extract the in-plane speed of the point. This then is used to extract the vertical location, knowing that at the bottom part of the sphere, the point would be moving in one direction, close to the center there would be much less motion, while in the top portion of the sphere, the point would be moving in the reverse direction than the bottom. The velocity allows the exact localisation of the point in the vertical direction. This process allows for sub-diffractive intracellular tomography. This technique can further allow high-resolution detection of fluorescent molecules inside the cell also, when combined with convective flows. △ Less

Submitted 15 May, 2025; originally announced May 2025.

Intracellular phagosome shell is rigid enough to transfer outside torque to the inner spherical particle

Authors: Srestha Roy, Arvin Gopal Subramaniam, Snigdhadev Chakraborty, Jayesh Goswami, Subastri Ariraman, Krishna Kumari Swain, Swathi Sudhakar, Rajesh Singh, Basudev Roy

Abstract: Intracellular phagosomes have a lipid bilayer encapsulated fluidic shell outside the particle, on the outer side of which, molecular motors are attached. An optically trapped spherical birefringent particle phagosome provides an ideal platform to probe fluidity of the shell, as the inner particle is optically confined both in translation and in rotation. Using a recently reported method to calibra… ▽ More Intracellular phagosomes have a lipid bilayer encapsulated fluidic shell outside the particle, on the outer side of which, molecular motors are attached. An optically trapped spherical birefringent particle phagosome provides an ideal platform to probe fluidity of the shell, as the inner particle is optically confined both in translation and in rotation. Using a recently reported method to calibrate the translation and pitch rotations - yielding a spatial resolution of about 2 nm and angular resolution of 0.1 degrees - we report novel roto-translational coupled dynamics. We also suggest a new technique where we explore the correlation between the translation and pitch rotation to study extent of activity. Given that a spherical birefringent particle phagosome is almost a sphere, the fact that it turns due to the activity of the motors is not obvious, even implying high rigidity of shell. Applying a minimal model for the roto-translational coupling, we further show that this coupling manifests itself as sustained fluxes in phase space, a signature of broken detailed balance. △ Less

Submitted 11 April, 2025; originally announced April 2025.

Comments: *equal contribution, ‡ joint corresponding author

Non-resonant inter-species interaction and its effect on the position response function of cold atoms

Authors: Anirban Misra, Urbashi Satpathi, Supurna Sinha, Sanjukta Roy, Saptarishi Chaudhuri

Abstract: In the context of non-equilibrium statistical physics, the position response of a particle, coupled to a bath, subjected to an external force is a topic of broad interest. A topic of further interest is two distinguishable sets of interacting particles in contact with two different baths. Here, we report the experimental evidence of the modification of the position response function (PRF) of an en… ▽ More In the context of non-equilibrium statistical physics, the position response of a particle, coupled to a bath, subjected to an external force is a topic of broad interest. A topic of further interest is two distinguishable sets of interacting particles in contact with two different baths. Here, we report the experimental evidence of the modification of the position response function (PRF) of an ensemble of cold atoms in a magneto-optical trap when it is placed alongside a dilute cloud of cold atoms of a different species. Our experiment consists of a mass-imbalanced cold atomic mixture of Potassium and Sodium atoms. We focus on the position response of Potassium atoms when subjected to a sudden displacement in the presence of a cold Sodium atomic cloud. Notably, we find that, in the underdamped regime of motion, the oscillation frequency of motion of the cold atoms changes as much as 30 $\%$ depending on the effective inter-species light-assisted interaction strength. On the other hand, in the overdamped regime, there is a reduction, as high as 10.5 $\%$ in the damping coefficient, depending on the interaction strength. Using a quantum Langevin approach, we develop a framework that aligns well with experimental results, with potential applications in mass and charge transport studies under varied physical conditions simulated in cold atoms. △ Less

Submitted 28 March, 2025; originally announced March 2025.

Comments: 21 pages, 6 figures

Building Neutron Stars with the MUSES Calculation Engine

Authors: Mateus Reinke Pelicer, Nikolas Cruz-Camacho, Carlos Conde, David Friedenberg, Satyajit Roy, Ziyuan Zhang, T. Andrew Manning, Mark G. Alford, Alexander Clevinger, Joaquin Grefa, Roland Haas, Alexander Haber, Mauricio Hippert, Jeremy W. Holt, Johannes Jahan, Micheal Kahangirwe, Rajesh Kumar, Jeffrey Peterson, Hitansh Shah, Andrew W. Steiner, Hung Tan, Yumu Yang, Volodymyr Vovchenko, Veronica Dexheimer, Jorge Noronha , et al. (3 additional authors not shown)

Abstract: Exploring the equation of state of dense matter is an essential part of interpreting the observable properties of neutron stars. We present here the first results for dense matter in the zero-temperature limit generated by the MUSES Calculation Engine, a composable workflow management system that orchestrates calculation and data processing stages comprising a collection of software modules design… ▽ More Exploring the equation of state of dense matter is an essential part of interpreting the observable properties of neutron stars. We present here the first results for dense matter in the zero-temperature limit generated by the MUSES Calculation Engine, a composable workflow management system that orchestrates calculation and data processing stages comprising a collection of software modules designed within the MUSES framework. The modules presented in this work calculate equations of state using algorithms spanning three different theories/models: (1) Crust Density Functional Theory, valid starting at low densities, (2) Chiral Effective Field Theory, valid around saturation density, and (3) the Chiral Mean Field model, valid beyond saturation density. Lepton contributions are added through the Lepton module to each equation of state, ensuring charge neutrality and the possibility of $β$-equilibrium. Using the Synthesis module, we match the three equations of state using different thermodynamic variables and different methods. We then couple the complete equation of state to a novel full-general-relativity solver (QLIMR) module that calculates neutron star properties. We find that the matching performed using different thermodynamic variables affects differently the range obtained for neutron star masses and radii (although never beyond a few percent difference). We also investigate the universality of equation of state-independent relations for our matched stars. Finally, for the first time, we use the Flavor Equilibration module to estimate bulk viscosity and flavor relaxation charge fraction and rates (at low temperature) for Chiral Effective Field Theory and the Chiral Mean Field model. △ Less

Submitted 11 February, 2025; originally announced February 2025.

Comments: 38 pages, 17 figures, 6 tables

Confinement and Activity-Driven Dynamics of Semiflexible Polymers in Motility Assays

Authors: Sandip Roy, Anil Kumar Dasanna

Abstract: We investigate the dynamics of semiflexible polymers in a motility assay, where motor proteins (MPs) stochastically bind, unbind, and walk along the polymer, under the influence of harmonic confinement. Using Langevin dynamics simulations, we explore the interplay between the polymer's rigidity, activity in the form of attachment/detachment of MPs and subsequent movement of attached MPs, and trap… ▽ More We investigate the dynamics of semiflexible polymers in a motility assay, where motor proteins (MPs) stochastically bind, unbind, and walk along the polymer, under the influence of harmonic confinement. Using Langevin dynamics simulations, we explore the interplay between the polymer's rigidity, activity in the form of attachment/detachment of MPs and subsequent movement of attached MPs, and trap strength, revealing a two-state transition from a trapped to a free polymer, with an intermediate coexistence region. Rigidity significantly impacts the trapping behaviour, with flexible polymers remaining trapped at the higher activity. Attachment/detachment of MPs can also induce a change in the effective rigidity of the polymer and, therefore, influence confinement by the trap.The polymer undergoes spiral and open-chain conformations, with the turning number serving as a key order parameter to quantify spiral formation. We show that confinement stabilizes spiral structures and suppresses open-chain motion, especially at higher activity. The centre of mass (COM) dynamics are analyzed through the mean square displacement (MSD), showing diffusive, ballistic, and diffusive regimes that depend on the trap strength and activity. Negative excess kurtosis indicates nonequilibrium behaviour, which saturates with increasing confinement, reflecting the dominance of the trap over the activity. △ Less

Submitted 7 January, 2025; originally announced January 2025.

A comprehensive study of the Spin-Hall effect of tightly focused linearly polarized light through a stratified medium in optical tweezers

Authors: Sramana Das, Sauvik Roy, Subhasish Dutta Gupta, Nirmalya Ghosh, Ayan Banerjee

Abstract: The optical Spin-Hall effect originates from the interaction between the spin angular momentum (SAM) and extrinsic orbital angular momentum (OAM) of light, leading to mutual interrelations between the polarization and trajectory of light in case of non-paraxial fields. Here, we extensively study the SHE and the resultant Spin-Hall shifts (SHS) in optical tweezers (OT) by varying the numerical aper… ▽ More The optical Spin-Hall effect originates from the interaction between the spin angular momentum (SAM) and extrinsic orbital angular momentum (OAM) of light, leading to mutual interrelations between the polarization and trajectory of light in case of non-paraxial fields. Here, we extensively study the SHE and the resultant Spin-Hall shifts (SHS) in optical tweezers (OT) by varying the numerical aperture of objective lenses, and the refractive index (RI) stratification of the trapping medium. Indeed, we obtain much larger values of the SHS for particular combinations of NA and stratification compared to the sub-wavelength orders typically reported. We also observe that the longitudinal component of the spin angular momentum (SAM) density - which is responsible for the spin of birefringent particles in optical tweezers - changes more-or-less monotonically with the lens numerical aperture, except around values of the latter where the angle subtended by the focused light equals the critical angle for a particular RI interface. Our results may find applications in designing experiments for tuning the SHS and SAM induced due to SOI to generate exotic optomechanics of trapped particles in optical tweezers. △ Less

Submitted 21 November, 2024; originally announced November 2024.

Comments: 10 pages, 7 figures

Quasi-coherent perfect absorption of counter-propagating vector beams of finite spatial extent through an absorptive slab

Authors: Sauvik Roy, Nirmalya Ghosh, Ayan Banerjee, Subhasish Dutta Gupta

Abstract: Coherent perfect absorption (CPA) has been a topic of considerable contemporary research interest. Most of the theoretical treatment of CPA with beams, to the best of our knowledge, relies on a scalar (in some cases coupled mode) theories with inadequate input about the polarization states of the incoming light. In view of the lack of a full vectorial theory even for the original CPA configuration… ▽ More Coherent perfect absorption (CPA) has been a topic of considerable contemporary research interest. Most of the theoretical treatment of CPA with beams, to the best of our knowledge, relies on a scalar (in some cases coupled mode) theories with inadequate input about the polarization states of the incoming light. In view of the lack of a full vectorial theory even for the original CPA configuration by Wan et al \cite{timereversedlasing_science}, we revisit the same when the incident plane waves are replaced by well defined vector beams with or without OAM. We study the absorption characteristics of two counter-propagating monochromatic structured beams, e.g., Gaussian and Laguerre-Gaussian (LG) beams with and without orbital angular momentum, respectively, incident normally on a composite slab from both sides by fulfilling the CPA condition exclusively for the central plane wave component. We show that though perfect absorption is not achievable, there can be a substantial reduction of the scattered light. We also consider the limitations of CPA for oblique incidence and discuss the difficulties. We believe that our study will motivate and necessitate the study of recent advancements with input vector beams, retaining the full polarization information of the off-axis spatial harmonics. △ Less

Submitted 24 March, 2025; v1 submitted 18 November, 2024; originally announced November 2024.

Comments: 5 pages, 6 figures, Comments are appreciated!

Parametric Autoresonance with Time-Delayed Control

Authors: Somnath Roy, Mattia Coccolo, Miguel A. F. Sanjuán

Abstract: We investigate how a constant time delay influences a parametric autoresonant system. This is a nonlinear system driven by a parametrically chirped force with a negative delay-feedback that maintains adiabatic phase locking with the driving frequency. This phase locking results in a continuous amplitude growth, regardless of parameter changes. Our study reveals a critical threshold for delay stren… ▽ More We investigate how a constant time delay influences a parametric autoresonant system. This is a nonlinear system driven by a parametrically chirped force with a negative delay-feedback that maintains adiabatic phase locking with the driving frequency. This phase locking results in a continuous amplitude growth, regardless of parameter changes. Our study reveals a critical threshold for delay strength; above this threshold, autoresonance is sustained, while below it, autoresonance diminishes. We examine the interplay between time delay and autoresonance stability, using multi-scale perturbation methods to derive analytical results, which are corroborated by numerical simulations. Ultimately, the goal is to understand and control autoresonance stability through the time-delay parameters. △ Less

Submitted 21 January, 2025; v1 submitted 15 November, 2024; originally announced November 2024.

Comments: 17 pages, 5 figures

MSC Class: 65 ACM Class: G.1; J.2

Interpreting the suction stress profiles under steady-state conditions considering the independence of van Genuchten SWCC parameters

Authors: Sumanta Roy, Manash Chakraborty

Abstract: Suction stress is a fundamental component for applying the effective stress principle in unsaturated geotechnical engineering problems. The present paper aims to understand how the suction stress profiles get influenced if the $m$ and $n$ parameter of the van-Genuchten SWCC model is completely independent. Through the analysis, it is well noted that for constant air entry value, if the $m$ and… ▽ More Suction stress is a fundamental component for applying the effective stress principle in unsaturated geotechnical engineering problems. The present paper aims to understand how the suction stress profiles get influenced if the $m$ and $n$ parameter of the van-Genuchten SWCC model is completely independent. Through the analysis, it is well noted that for constant air entry value, if the $m$ and $n$ relationships are varied, not only the number and the spread of the characteristic regimes get influenced, but the nature and the trend of the suction stress profiles associated with the regimes also alter significantly. A suggestion of selecting the m and n relationships is proposed for obtaining conservative solutions for geotechnical stability problems. The relevance of considering the unconstrained m parameter is established by computing the tensile crack depth of the clayey slope under steady-state infiltration conditions. △ Less

Submitted 6 November, 2024; originally announced November 2024.

Comments: 48 pages, 18 figures, 2 tables

Discrete Element Simulations of particles interacting via capillary forces using MercuryDPM

Authors: Meysam Bagheri, Sudeshna Roy, Thorsten Poeschel

Abstract: We present the implementation of two advanced capillary bridge approximations within the Discrete Element Method (DEM) framework of the open-source code MercuryDPM. While MercuryDPM already includes a simplified version of the Willett approximation, our work involves implementing both the classical Willett approximation and the recently published Bagheri approximation in MercuryDPM. Through detail… ▽ More We present the implementation of two advanced capillary bridge approximations within the Discrete Element Method (DEM) framework of the open-source code MercuryDPM. While MercuryDPM already includes a simplified version of the Willett approximation, our work involves implementing both the classical Willett approximation and the recently published Bagheri approximation in MercuryDPM. Through detailed descriptions and illustrative simulations using a two-particle collision model, we demonstrate the enhanced accuracy and capabilities of these approximations in capturing the complex dynamics of wet granular matter. △ Less

Submitted 4 November, 2024; originally announced November 2024.

A Kinetic Scheme Based On Positivity Preservation For Multi-component Euler Equations

Authors: Shashi Shekhar Roy, S. V. Raghurama Rao

Abstract: A kinetic model with flexible velocities is presented for solving the multi-component Euler equations. The model employs a two-velocity formulation in 1D and a three-velocity formulation in 2D. In 2D, the velocities are aligned with the cell-interface to ensure a locally one-dimensional macroscopic normal flux in a finite volume. The velocity magnitudes are defined to satisfy conditions for preser… ▽ More A kinetic model with flexible velocities is presented for solving the multi-component Euler equations. The model employs a two-velocity formulation in 1D and a three-velocity formulation in 2D. In 2D, the velocities are aligned with the cell-interface to ensure a locally one-dimensional macroscopic normal flux in a finite volume. The velocity magnitudes are defined to satisfy conditions for preservation of positivity of density of each component as well as of overall pressure for first order accuracy under a CFL-like time-step restriction. Additionally, at a stationary contact discontinuity, the velocity definition is modified to achieve exact capture. The basic scheme is extended to third order accuracy using a Chakravarthy-Osher type flux-limited approach along with Strong Stability Preserving Runge-Kutta (SSPRK) method. Benchmark 1D and 2D test cases, including shock-bubble interaction problems, are solved to demonstrate the efficacy of the solver in accurately capturing the relevant flow features. △ Less

Submitted 27 April, 2025; v1 submitted 31 October, 2024; originally announced November 2024.

Comments: arXiv admin note: text overlap with arXiv:2403.14794

Liquid-Vapor Phase Equilibrium in Molten Aluminum Chloride (AlCl3) Enabled by Machine Learning Interatomic Potentials

Authors: Rajni Chahal, Luke D Gibson, Santanu Roy, Vyacheslav S Bryantsev

Abstract: Molten salts are promising candidates in numerous clean energy applications, where challenges in experimental methods limit knowledge of their safety-critical temperature-properties correlations. Herein, we developed and employed machine learning interatomic potentials (MLIP) to study AlCl3 molten salt across varied thermodynamic conditions. The MLIP accurately predicted the existence of Al2Cl6 di… ▽ More Molten salts are promising candidates in numerous clean energy applications, where challenges in experimental methods limit knowledge of their safety-critical temperature-properties correlations. Herein, we developed and employed machine learning interatomic potentials (MLIP) to study AlCl3 molten salt across varied thermodynamic conditions. The MLIP accurately predicted the existence of Al2Cl6 dimers in this molten salt as informed by Raman spectra and neutron structure factor. The MLIP is validated using available experimental data for temperature correlations with viscosities, surface tension, as well as liquid and vapor densities evaluated from two-phase coexistence simulations. In doing so, we closely predicted the critical temperature and critical density compared to reported experimental values for AlCl3. The demonstrated approach for MLIP training in closely predicting phase equilibrium in this study can be useful towards screening nuclear reactors-relevant salt compositions, helping to mitigate safety concerns. △ Less

Submitted 23 October, 2024; originally announced October 2024.

Comments: 37 pages, 9 figures

Spatially resolved spin angular momentum mediated by spin-orbit interaction in tightly focused spinless vector beams in optical tweezers

Authors: Ram Nandan Kumar, Sauvik Roy, Subhasish Dutta Gupta, Nirmalya Ghosh, Ayan Banerjee

Abstract: We demonstrate an effective and optimal strategy for generating spatially resolved longitudinal spin angular momentum (LSAM) in optical tweezers by tightly focusing first-order azimuthally radially polarized (ARP) vector beams with zero intrinsic angular momentum into a refractive index (RI) stratified medium. The stratified medium gives rise to a spherically aberrated intensity profile near the f… ▽ More We demonstrate an effective and optimal strategy for generating spatially resolved longitudinal spin angular momentum (LSAM) in optical tweezers by tightly focusing first-order azimuthally radially polarized (ARP) vector beams with zero intrinsic angular momentum into a refractive index (RI) stratified medium. The stratified medium gives rise to a spherically aberrated intensity profile near the focal region of the optical tweezers, with off-axis intensity lobes in the radial direction possessing opposite LSAM (helicities corresponding to $σ= +1$ and -1) compared to the beam centre. We trap mesoscopic birefringent particles in an off-axis intensity lobe as well as at the beam center by modifying the trapping plane, and observe particles spinning in opposite directions depending on their location. The direction of rotation depends on particle size with large particles spinning either clockwise (CW) or anticlockwise (ACW) depending on the direction of spirality of the polarization of the ARP vector beam after tight focusing, while smaller particles spin in both directions depending on their spatial location. Numerical simulations support our experimental observations. Our results introduce new avenues in spin-orbit optomechanics to facilitate novel yet straightforward avenues for exotic and complex particle manipulation in optical tweezers. △ Less

Submitted 26 September, 2024; originally announced September 2024.

Comments: 10 pages, 6 figures

NiOx/\b{eta}-Ga2O3 Heterojunction Diode Achieving Breakdown Voltage >3 kV with Plasma Etch Field-Termination

Authors: Yizheng Liu, Saurav Roy, Carl Peterson, Arkka Bhattacharyya, Sriram Krishnamoorthy

Abstract: This work reports the fabrication and characterization of a NiOx/\b{eta}-Ga2O3 heterojunction diode (HJD) that uses a metallic nickel (Ni) target to deposit NiOx layers via reactive RF magnetron sputtering and lift-off processing with >3 kV breakdown voltage, record-low reverse current leakage under high reverse bias, and high junction electric fields (>3.34 MV/cm). The heterojunction diodes are f… ▽ More This work reports the fabrication and characterization of a NiOx/\b{eta}-Ga2O3 heterojunction diode (HJD) that uses a metallic nickel (Ni) target to deposit NiOx layers via reactive RF magnetron sputtering and lift-off processing with >3 kV breakdown voltage, record-low reverse current leakage under high reverse bias, and high junction electric fields (>3.34 MV/cm). The heterojunction diodes are fabricated via bilayer NiOx sputtering followed by self-aligned mesa-etching for field-termination on both large (1-mm2) and small area (100-μm diameter) devices. The HJD exhibits a ~135 A/cm2 forward current density at 5 V with a rectifying ratio of ~1010. The minimum differential specific on-resistance is measured to be 17.26 mΩ cm2. The breakdown voltage on 100-μm diameter pads was measured to be greater than 3 kV with a noise floor-level reverse leakage current density (10-8~10-6 A/cm2) until 3 kV, accomplishing a parallel-plane junction electric field to be at least 3.34 MV/cm at 3 kV with a power figure of merit (PFOM) >0.52 GW/cm2. Temperature-dependent forward current density-voltage (J-V) measurements are performed from room temperature (25 C) to 200 C which showed a temperature coefficient of resistance (α) equaling 1.56, higher than that of \b{eta}-Ga2O3 Schottky barrier diodes (SBDs), indicating potential conductivity degradation within NiOx at elevated temperatures. △ Less

Submitted 25 September, 2024; originally announced September 2024.

Comments: 6 pages, 5 figures, APL Journal

Prithvi WxC: Foundation Model for Weather and Climate

Authors: Johannes Schmude, Sujit Roy, Will Trojak, Johannes Jakubik, Daniel Salles Civitarese, Shraddha Singh, Julian Kuehnert, Kumar Ankur, Aman Gupta, Christopher E Phillips, Romeo Kienzler, Daniela Szwarcman, Vishal Gaur, Rajat Shinde, Rohit Lal, Arlindo Da Silva, Jorge Luis Guevara Diaz, Anne Jones, Simon Pfreundschuh, Amy Lin, Aditi Sheshadri, Udaysankar Nair, Valentine Anantharaj, Hendrik Hamann, Campbell Watson , et al. (4 additional authors not shown)

Abstract: Triggered by the realization that AI emulators can rival the performance of traditional numerical weather prediction models running on HPC systems, there is now an increasing number of large AI models that address use cases such as forecasting, downscaling, or nowcasting. While the parallel developments in the AI literature focus on foundation models -- models that can be effectively tuned to addr… ▽ More Triggered by the realization that AI emulators can rival the performance of traditional numerical weather prediction models running on HPC systems, there is now an increasing number of large AI models that address use cases such as forecasting, downscaling, or nowcasting. While the parallel developments in the AI literature focus on foundation models -- models that can be effectively tuned to address multiple, different use cases -- the developments on the weather and climate side largely focus on single-use cases with particular emphasis on mid-range forecasting. We close this gap by introducing Prithvi WxC, a 2.3 billion parameter foundation model developed using 160 variables from the Modern-Era Retrospective Analysis for Research and Applications, Version 2 (MERRA-2). Prithvi WxC employs an encoder-decoder-based architecture, incorporating concepts from various recent transformer models to effectively capture both regional and global dependencies in the input data. The model has been designed to accommodate large token counts to model weather phenomena in different topologies at fine resolutions. Furthermore, it is trained with a mixed objective that combines the paradigms of masked reconstruction with forecasting. We test the model on a set of challenging downstream tasks namely: Autoregressive rollout forecasting, Downscaling, Gravity wave flux parameterization, and Extreme events estimation. The pretrained model with 2.3 billion parameters, along with the associated fine-tuning workflows, has been publicly released as an open-source contribution via Hugging Face. △ Less

Submitted 20 September, 2024; originally announced September 2024.

Observed Fluctuation Enhancement and Departure from WKB Theory in Sub-Alfvénic Solar Wind

Authors: David Ruffolo, Panisara Thepthong, Peera Pongkitiwanichakul, Sohom Roy, Francesco Pecora, Riddhi Bandyopadhyay, Rohit Chhiber, Arcadi V. Usmanov, Michael Stevens, Samuel Badman, Orlando Romeo, Jiaming Wang, Joshua Goodwill, Melvyn L. Goldstein, William H. Matthaeus

Abstract: Using Parker Solar Probe data from orbits 8 through 17, we examine fluctuation amplitudes throughout the critical region where the solar wind flow speed approaches and then exceeds the Alfvén wave speed, taking account of various exigencies of the plasma data. In contrast to WKB theory for non-interacting Alfvén waves streaming away from the Sun, the magnetic and kinetic fluctuation energies per u… ▽ More Using Parker Solar Probe data from orbits 8 through 17, we examine fluctuation amplitudes throughout the critical region where the solar wind flow speed approaches and then exceeds the Alfvén wave speed, taking account of various exigencies of the plasma data. In contrast to WKB theory for non-interacting Alfvén waves streaming away from the Sun, the magnetic and kinetic fluctuation energies per unit volume are not monotonically decreasing. Instead, there is clear violation of conservation of standard WKB wave action, which is consistent with previous indications of strong in-situ fluctuation energy input in the solar wind near the Alfvén critical region. This points to strong violations of WKB theory due to nonlinearity (turbulence) and major energy input near the critical region, which we interpret as likely due to driving by large-scale coronal shear flows. △ Less

Submitted 4 September, 2024; originally announced September 2024.

$1/f$ Noise in the Heliosphere: A Target for PUNCH Science

Authors: Jiaming Wang, William H. Matthaeus, Rohit Chhiber, Sohom Roy, Rayta A. Pradata, Francesco Pecora, Yan Yang

Abstract: We present a broad review of 1/f noise observations in the heliosphere, and discuss and complement the theoretical background of generic 1/f models as relevant to NASA's PUNCH mission. First observed in the voltage fluctuations of vacuum tubes, the scale-invariant 1/f spectrum has since been identified across a wide array of natural and artificial systems, including heart rate fluctuations and lou… ▽ More We present a broad review of 1/f noise observations in the heliosphere, and discuss and complement the theoretical background of generic 1/f models as relevant to NASA's PUNCH mission. First observed in the voltage fluctuations of vacuum tubes, the scale-invariant 1/f spectrum has since been identified across a wide array of natural and artificial systems, including heart rate fluctuations and loudness patterns in musical compositions. In the solar wind, the interplanetary magnetic field trace spectrum exhibits 1/f scaling within the frequency range from around 2e-6 Hz to around 1e-3 Hz at 1 au. One compelling mechanism for the generation of 1/f noise is the superposition principle, where a composite 1/f spectrum arises from the superposition of a collection of individual power-law spectra characterized by a scale-invariant distribution of correlation times. In the context of the solar wind, such a superposition could originate from scale-invariant reconnection processes in the corona. Further observations have detected 1/f signatures in the photosphere and corona at frequency ranges compatible with those observed at 1 au, suggesting an even lower altitude origin of 1/f spectrum in the solar dynamo itself. This hypothesis is bolstered by dynamo experiments and simulations that indicate inverse cascade activities, which can be linked to successive flux tube reconnections beneath the corona, and are known to generate 1/f noise possibly through nonlocal interactions at the largest scales. Conversely, models positing in situ generation of $1/f$ signals face causality issues in explaining the low-frequency portion of the 1/f spectrum. Understanding 1/f noise in the solar wind may inform central problems in heliospheric physics, such as the solar dynamo, coronal heating, the origin of the solar wind, and the nature of interplanetary turbulence. △ Less

Submitted 13 December, 2024; v1 submitted 3 September, 2024; originally announced September 2024.

Comments: 20 pages, 10 figures, 1 appendix, accepted to Solar Physics

Dielectric Reliability and Interface Trap Characterization in MOCVD grown In-situ Al$_2$O$_3$ on $β$-Ga$_2$O$_3$

Authors: Saurav Roy, Arkka Bhattacharyya, Carl Peterson, Sriram Krishnamoorthy

Abstract: In this article, we investigate the in-situ growth of Al$_2$O$_3$ on $β$-Ga$_2$O$_3$ using metal-organic chemical vapor deposition (MOCVD) at a high temperature of 800°C. The Al$_2$O$_3$ is grown within the same reactor as the $β$-Ga$_2$O$_3$, employing trimethylaluminum (TMAl) and O$_2$ as precursors without breaking the vacuum. We characterize the shallow and deep-level traps through stressed ca… ▽ More In this article, we investigate the in-situ growth of Al$_2$O$_3$ on $β$-Ga$_2$O$_3$ using metal-organic chemical vapor deposition (MOCVD) at a high temperature of 800°C. The Al$_2$O$_3$ is grown within the same reactor as the $β$-Ga$_2$O$_3$, employing trimethylaluminum (TMAl) and O$_2$ as precursors without breaking the vacuum. We characterize the shallow and deep-level traps through stressed capacitance-voltage (C-V) and photo-assisted C-V methods. The high-temperature deposited dielectric demonstrates an impressive breakdown field of approximately 10 MV/cm. Furthermore, we evaluate the reliability and lifetime of the dielectrics using time-dependent dielectric breakdown (TDDB) measurements. By modifying the dielectric deposition process to include a high-temperature (800°C) thin interfacial layer and a low-temperature (600°C) bulk layer, we report a 10-year lifetime under a stress field of 3.5 MV/cm along a breakdown field of 7.8 MV/cm. △ Less

Submitted 21 August, 2024; originally announced August 2024.

Record-High Electron Mobility and Controlled Low 10$^{15}$ cm$^{-3}$ Si-doping in (010) $β$-Ga$_2$O$_3$ Epitaxial Drift Layers

Authors: Carl Peterson, Arkka Bhattacharyya, Kittamet Chanchaiworawit, Rachel Kahler, Saurav Roy, Yizheng Liu, Steve Rebollo, Anna Kallistova, Thomas E. Mates, Sriram Krishnamoorthy

Abstract: We report on metalorganic chemical vapor deposition (MOCVD) growth of controllably Si-doped 4.5 $μ$m thick $β$-Ga$_2$O$_3$ films with electron concentrations in the 10$^{15}$ cm$^{-3}$ range and record-high room temperature Hall electron mobilities of up to 200 cm$^2$/V.s, reaching the predicted theoretical maximum room temperature mobility value for $β$-Ga$_2$O$_3$. Growth of the homoepitaxial fi… ▽ More We report on metalorganic chemical vapor deposition (MOCVD) growth of controllably Si-doped 4.5 $μ$m thick $β$-Ga$_2$O$_3$ films with electron concentrations in the 10$^{15}$ cm$^{-3}$ range and record-high room temperature Hall electron mobilities of up to 200 cm$^2$/V.s, reaching the predicted theoretical maximum room temperature mobility value for $β$-Ga$_2$O$_3$. Growth of the homoepitaxial films was performed on Fe-doped (010) $β$-Ga$_2$O$_3$ substrates at a growth rate of 1.9 $μ$m/hr using TEGa as the Gallium precursor. To probe the background electron concentration, an unintentionally doped film was grown with a Hall concentration of 3.43 x 10$^{15}$ cm$^{-3}$ and Hall mobility of 196 cm$^2$/V.s. Growth of intentionally Si-Doped films was accomplished by fixing all growth conditions and varying only the silane flow, with controllable Hall electron concentrations ranging from 4.38 x 10$^{15}$ cm$^{-3}$ to 8.30 x 10$^{15}$ cm$^{-3}$ and exceptional Hall mobilities ranging from 194 - 200 cm$^2$/V.s demonstrated. C-V measurements showed a flat charge profile with the N$_D^+$ - N$_A^-$ values correlating well with the Hall-measured electron concentration in the films. SIMS measurements showed the silicon atomic concentration matched the Hall electron concentration with Carbon and Hydrogen below detection limit in the films. The Hall, C-V, and SIMS data indicate the growth of high-quality 4.5 $μ$m thick $β$-Ga$_2$O$_3$ films and controllable doping into the mid 10$^{15}$ cm$^{-3}$ range. These results demonstrate MOCVD growth of electronics grade record-high mobility, low carrier density, and thick $β$-Ga$_2$O$_3$ drift layers for next generation vertical $β$-Ga$_2$O$_3$ power devices. △ Less

Submitted 24 July, 2024; originally announced July 2024.

Comments: 16 Pages, 10 Figures, 2 Tables

Journal ref: Appl. Phys. Lett. 125, 182103 (2024)

Analysis of Unsaturated Slope Stability under Seismic and Surcharge Loading by Upper Bound Rigid Block Method

Authors: Sumanta Roy, Sourav Sarkar, Manash Chakraborty

Abstract: Failure of earthen slopes is a very recurrent phenomenon, credited mainly due to the excess rainfall and application of surfeit surcharge. However, most of the analyses regarding slope stability were performed without considering the unsaturated state of the soil. The prime purpose of the present manuscript is to address the stability of unsaturated homogeneous slopes subjected to surcharge load a… ▽ More Failure of earthen slopes is a very recurrent phenomenon, credited mainly due to the excess rainfall and application of surfeit surcharge. However, most of the analyses regarding slope stability were performed without considering the unsaturated state of the soil. The prime purpose of the present manuscript is to address the stability of unsaturated homogeneous slopes subjected to surcharge load and pseudo-static seismic forces under different climatic conditions. The upper bound limit analysis technique was used based on the log-spiral failure mechanism. The suction stress-based effective stress approach was used to capture the effect of the unsaturated zone of the slope. The suction stress is modelled using Gardner's one-parameter hydraulic conductivity function and van-Genuchten's soil water characteristics curve. An extensive parametric study is carried out to assess the combined effect of slope geometry, soil-strength parameters, hydro-mechanical parameters, depth of water table, various flow conditions, surcharge load, and seismic loading. A few stability charts are proposed to show the impact of surcharge load and seismic load separately on unsaturated homogeneous slopes subjected to various climatic conditions. The present computed solutions match quite well with the available solutions prescribed in the literature. △ Less

Submitted 23 July, 2024; originally announced July 2024.

Machine Learning Global Simulation of Nonlocal Gravity Wave Propagation

Authors: Aman Gupta, Aditi Sheshadri, Sujit Roy, Vishal Gaur, Manil Maskey, Rahul Ramachandran

Abstract: Global climate models typically operate at a grid resolution of hundreds of kilometers and fail to resolve atmospheric mesoscale processes, e.g., clouds, precipitation, and gravity waves (GWs). Model representation of these processes and their sources is essential to the global circulation and planetary energy budget, but subgrid scale contributions from these processes are often only approximatel… ▽ More Global climate models typically operate at a grid resolution of hundreds of kilometers and fail to resolve atmospheric mesoscale processes, e.g., clouds, precipitation, and gravity waves (GWs). Model representation of these processes and their sources is essential to the global circulation and planetary energy budget, but subgrid scale contributions from these processes are often only approximately represented in models using parameterizations. These parameterizations are subject to approximations and idealizations, which limit their capability and accuracy. The most drastic of these approximations is the "single-column approximation" which completely neglects the horizontal evolution of these processes, resulting in key biases in current climate models. With a focus on atmospheric GWs, we present the first-ever global simulation of atmospheric GW fluxes using machine learning (ML) models trained on the WINDSET dataset to emulate global GW emulation in the atmosphere, as an alternative to traditional single-column parameterizations. Using an Attention U-Net-based architecture trained on globally resolved GW momentum fluxes, we illustrate the importance and effectiveness of global nonlocality, when simulating GWs using data-driven schemes. △ Less

Submitted 13 November, 2024; v1 submitted 20 June, 2024; originally announced June 2024.

Comments: International Conference on Machine Learning 2024

The Alfvén Transition Zone observed by the Parker Solar Probe in Young Solar Wind -- Global Properties and Model Comparisons

Authors: Rohit Chhiber, Francesco Pecora, Arcadi V Usmanov, William H Matthaeus, Melvyn L Goldstein, Sohom Roy, Jiaming Wang, Panisara Thepthong, David Ruffolo

Abstract: The transition from subAlfvénic to superAlfvénic flow in the solar atmosphere is examined by means of Parker Solar Probe (PSP) measurements during solar encounters 8 to 14. Around 220 subAlfvénic periods with a duration $\ge$ 10 minutes are identified. The distribution of their durations, heliocentric distances, and Alfvén Mach number are analyzed and compared with a global magnetohydrodynamic mod… ▽ More The transition from subAlfvénic to superAlfvénic flow in the solar atmosphere is examined by means of Parker Solar Probe (PSP) measurements during solar encounters 8 to 14. Around 220 subAlfvénic periods with a duration $\ge$ 10 minutes are identified. The distribution of their durations, heliocentric distances, and Alfvén Mach number are analyzed and compared with a global magnetohydrodynamic model of the solar corona and wind, which includes turbulence effects. The results are consistent with a patchy and fragmented morphology, and suggestive of a turbulent Alfvén zone within which the transition from subAlfvénic to superAlfvénic flow occurs over an extended range of helioradii. These results inform and establish context for detailed analyses of subAlfvénic coronal plasma that are expected to emerge from PSP's final mission phase, as well as for NASA's planned PUNCH mission. △ Less

Submitted 16 May, 2024; originally announced May 2024.

Effect of light-assisted tunable interaction on the position response function of cold atoms

Authors: Anirban Misra, Urbashi Satpathi, Supurna Sinha, Sanjukta Roy, Saptarishi Chaudhuri

Abstract: The position response of a particle subjected to a perturbation is of general interest in physics. We study the modification of the position response function of an ensemble of cold atoms in a magneto-optical trap in the presence of tunable light-assisted interactions. We subject the cold atoms to an intense laser light tuned near the photoassociation resonance and observe the position response of… ▽ More The position response of a particle subjected to a perturbation is of general interest in physics. We study the modification of the position response function of an ensemble of cold atoms in a magneto-optical trap in the presence of tunable light-assisted interactions. We subject the cold atoms to an intense laser light tuned near the photoassociation resonance and observe the position response of the atoms subjected to a sudden displacement. Surprisingly, we observe that the entire cold atomic cloud undergoes collective oscillations. We use a generalised quantum Langevin approach to theoretically analyse the results of the experiments and find good agreement. △ Less

Submitted 26 March, 2024; originally announced March 2024.

Comments: 20 pages, 7 Figures

Journal ref: Optics Letters, Vol. 49, Issue 15, pp. 4377-4380 (2024)

A Kinetic Scheme based on Positivity Preservation with Exact Shock Capture

Authors: Shashi Shekhar Roy, S. V. Raghurama Rao

Abstract: In this paper, we present a kinetic model with flexible velocities that satisfy positivity preservation conditions for the Euler equations. Our 1D kinetic model consists of two velocities and employs both the asymmetrical and symmetrical models. Switching between the two models is governed by our formulation of kinetic relative entropy along with an additional criterion to ensure an accurate, entr… ▽ More In this paper, we present a kinetic model with flexible velocities that satisfy positivity preservation conditions for the Euler equations. Our 1D kinetic model consists of two velocities and employs both the asymmetrical and symmetrical models. Switching between the two models is governed by our formulation of kinetic relative entropy along with an additional criterion to ensure an accurate, entropic, and robust scheme. In 2D, we introduce a novel three-velocity kinetic model, defined to ensure a locally one-dimensional formulation for the resulting macroscopic normal flux. For first order accuracy, we also obtain a limit on the time step which ensures positivity preservation. The resulting numerical scheme captures grid-aligned steady shocks exactly. Several benchmark compressible flow test cases are solved in 1D and 2D to demonstrate the efficacy of the proposed solver. △ Less

Submitted 10 January, 2025; v1 submitted 21 March, 2024; originally announced March 2024.

Quantum-Based Salp Swarm Algorithm Driven Design Optimization of Savonius Wind Turbine-Cylindrical Deflector System

Authors: Paras Singh, Vishal Jaiswal, Subhrajit Roy, Aryan Tyagi, Gaurav Kumar, Raj Kumar Singh

Abstract: Savonius turbines, prominent in small-scale wind turbine applications operating under low-speed conditions, encounter limitations due to opposing torque on the returning blade, impeding high efficiency. A viable solution involves mitigating this retarding torque by directing incoming airflow through a cylindrical deflector. However, such flow control is highly contingent upon the location and size… ▽ More Savonius turbines, prominent in small-scale wind turbine applications operating under low-speed conditions, encounter limitations due to opposing torque on the returning blade, impeding high efficiency. A viable solution involves mitigating this retarding torque by directing incoming airflow through a cylindrical deflector. However, such flow control is highly contingent upon the location and size of the cylindrical deflector, and its angular velocity. This study introduces a novel design optimization framework tailored for enhancing the turbine-deflector system's performance. Leveraging surrogate models for computational efficiency, six different models were assessed, with Kriging selected for subsequent analysis based on its superior performance at approximating the relation between design parameters and objective function. The training data for the surrogate model and the flow field data around the system were obtained through Unsteady Reynolds-Averaged Navier Stokes (URANS) simulations using a sliding mesh technique. An in-house code for the Quantum-based Salp Swarm Optimization (QSSO) algorithm was then employed to obtain design parameters corresponding to the peak power coefficient (Cp) for the stationary deflector-turbine system. Additionally, the QSSO algorithm was quantitatively compared with nine other competing algorithms. The optimized stationary deflector-turbine system showed an improvement of 26.94% in Cp at Tip Speed Ratio (TSR) of 0.9 compared to the baseline case. Further investigation into the effect of deflector rotational velocity ($ω_d$) revealed significant improvements: 40.98% and 11.33% enhancement at $ω_d$ = 3 rad/s, and 51.23% and 19.42% at $ω_d$ = 40 rad/s, compared to configurations without a deflector and with the optimized stationary deflector, respectively at a TSR of 0.9. △ Less

Submitted 7 March, 2024; originally announced March 2024.

Comments: 42 pages, 16 figures

Inhomogeneous spin momentum induced orbital motion of birefringent particles in tight focusing of vector beams in optical tweezers

Authors: Ram Nandan Kumar, Sauvik Roy, Anand Dev Ranjan, Subhasish Dutta Gupta, Nirmalya Ghosh, Ayan Banerjee

Abstract: Spin orbit interaction (SOI) due to tight focusing of light in optical tweezers has led to exciting and exotic avenues towards inducing rotation in microscopic particles. However, instances where the back action of the particles influences and modifies SOI effects so as to induce rotational motion are rarely known. Here, we tightly focus a vector beam having radial/azimuthal polarization carrying… ▽ More Spin orbit interaction (SOI) due to tight focusing of light in optical tweezers has led to exciting and exotic avenues towards inducing rotation in microscopic particles. However, instances where the back action of the particles influences and modifies SOI effects so as to induce rotational motion are rarely known. Here, we tightly focus a vector beam having radial/azimuthal polarization carrying no intrinsic angular momentum, into a refractive index stratified medium, and observe orbital rotation of birefringent particles around the beam propagation axis. In order to validate our experimental findings, we perform numerical simulations of the underlying equations. Our simulations reveal that the interaction of light with a birefringent particle gives rise to inhomogeneous spin currents near the focus, resulting in a finite spin momentum. This spin momentum combines with the canonical momentum to finally generate an origin-dependent orbital angular momentum which is manifested in the rotation of the birefringent particles around the beam axis. Our study describes a unique modulation of the SOI of light due to interaction with anisotropic particles that can be used to identify new avenues for exotic and complex particle manipulation in optical tweezers. △ Less

Submitted 12 February, 2024; originally announced February 2024.

Comments: 7 pages, 6 figures. arXiv admin note: substantial text overlap with arXiv:2302.14443

Observation of Larmor-like precession of a single birefringent particle due to spin-dependent forces in tilted optical tweezers

Authors: Sauvik Roy, Nirmalya Ghosh, Ayan Banerjee, Subhasish Dutta Gupta

Abstract: We observe clear precessional motion of highly birefringent liquid crystal (LC) particles trapped in a spherically aberrated optical trap which is built around a tilted refractive index stratified medium. For input circularly polarized light, the breaking of azimuthal symmetry induced by the tilt leads to an asymmetric intensity distribution in the radial direction near the trap focal plane, which… ▽ More We observe clear precessional motion of highly birefringent liquid crystal (LC) particles trapped in a spherically aberrated optical trap which is built around a tilted refractive index stratified medium. For input circularly polarized light, the breaking of azimuthal symmetry induced by the tilt leads to an asymmetric intensity distribution in the radial direction near the trap focal plane, which - in combination with the spin-orbit conversion effects for input circularly polarized light - results in non-uniform canonical and spin momentum densities in those regions. In addition, while the canonical momentum remains always oriented towards the axial direction, the spin momentum reverses direction along spatial loops in the radial direction. As a consequence, the total momentum precesses around the canonical momentum vector along elliptical spatial loops - akin to a Larmor-like precession of magnetic moment (total momentum in our case) around a magnetic field (canonical momentum). We probe this precession experimentally using the single trapped LC particles - with the direction of precession determined by the helicity of the input light and the precession frequency varying linearly with the laser power. Our experimental results are validated by numerical simulations of the system where we employ the Debye-Wolf theory for tight focusing in the presence of a tilted stratified media. △ Less

Submitted 12 February, 2024; originally announced February 2024.

Comments: 6 pages, 3 figures, Comments are appreciated

Journal ref: Appl. Phys. Lett. 125, 071106 (2024)

Physical, chemical and morphological evolution of incipient soot obtained from molecular dynamics simulation of acetylene pyrolysis

Authors: Khaled Mosharraf Mukut, Anindya Ganguly, Eirini Goudeli, Georgios A. Kelesidis, Somesh P. Roy

Abstract: Incipient soot particles obtained from a series of reactive molecular dynamics simulations were studied to understand the evolution of physical, chemical, and morphological properties of incipient soot. Reactive molecular dynamics simulations of acetylene pyrolysis were performed using ReaxFF potential at 1350, 1500, 1650, and 1800 K. A total of 3324 incipient soot particles were extracted from th… ▽ More Incipient soot particles obtained from a series of reactive molecular dynamics simulations were studied to understand the evolution of physical, chemical, and morphological properties of incipient soot. Reactive molecular dynamics simulations of acetylene pyrolysis were performed using ReaxFF potential at 1350, 1500, 1650, and 1800 K. A total of 3324 incipient soot particles were extracted from the simulations at various stages of development. Features such as the number of carbon and hydrogen atoms, number of ring structures, mass, C/H ratio, radius of gyration, surface area, volume, atomic fractal dimension, and density were calculated for each particle. The calculated values of density and C/H ratio matched well with experimental values reported in the literature. Based on the calculated features, the particles were classified in two types: type 1 and type 2 particles. It was found that type 1 particles show significant morphological evolution while type 2 particles undergo chemical restructuring without any significant morphological change. The particle volume was found to be well-correlated with the number of carbon atoms in both type 1 and type 2 particle, whereas surface area was found to be correlated with the number of carbon atoms only for type 1 particles. A correlation matrix comparing the level of correlation between any two features for both type 1 and type 2 particle was created. Finally, based on the calculated statistics, a set of correlations among various physical and morphological parameters of incipient soot was proposed. △ Less

Submitted 9 February, 2024; originally announced February 2024.

Comments: 39 pages, 11 figures

Internal structure of incipient soot from acetylene pyrolysis obtained via molecular dynamics simulations

Authors: Khaled Mosharraf Mukut, Anindya Ganguly, Eirini Goudeli, Georgios A. Kelesidis, Somesh P. Roy

Abstract: A series of reactive molecular dynamics simulations is used to study the internal structure of incipient soot particles obtained from acetylene pyrolysis. The simulations were performed using ReaxFF potential at four different temperatures. The resulting soot particles are cataloged and analyzed to obtain statistics of their mass, volume, density, C/H ratio, number of cyclic structures, and other… ▽ More A series of reactive molecular dynamics simulations is used to study the internal structure of incipient soot particles obtained from acetylene pyrolysis. The simulations were performed using ReaxFF potential at four different temperatures. The resulting soot particles are cataloged and analyzed to obtain statistics of their mass, volume, density, C/H ratio, number of cyclic structures, and other features. A total of 3324 incipient soot particles were analyzed in this study. Based on their structural characteristics, the incipient soot particles are classified into two classes, referred to as type 1 and type 2 incipient soot particles in this work. The radial distribution of density, cyclic (5-, 6-, or 7-member rings) structures and C/H ratio inside the particles revealed a clear difference in the internal structure between type 1 and type 2 particles. These classes were further found to be well represented by the size of the particles with smaller particles in type 1 and larger particles in type 2. The radial distributions of ring structures, density, and C/H ratio indicated the presence of a dense core region in type 2 particles, whereas no clear evidence of the presence of a core was found in type 1 particles. In type 2 incipient soot particles, the boundary between the core and shell was found to be around 50%-60% of the particle radius of gyration. △ Less

Submitted 9 February, 2024; originally announced February 2024.

Comments: 33 pages, 11 figures

Anisotropy of Density Fluctuations in the Solar Wind at 1 au

Authors: Jiaming Wang, Rohit Chhiber, Sohom Roy, Manuel E. Cuesta, Francesco Pecora, Yan Yang, Xiangrong Fu, Hui Li, William H. Matthaeus

Abstract: A well-known property of solar wind plasma turbulence is the observed anisotropy of the autocorrelations, or equivalently the spectra, of velocity and magnetic field fluctuations. Here we explore the related but apparently not well-studied issue of the anisotropy of plasma density fluctuations in the energy-containing and inertial ranges of solar wind turbulence. Using 10 years (1998-2008) of in s… ▽ More A well-known property of solar wind plasma turbulence is the observed anisotropy of the autocorrelations, or equivalently the spectra, of velocity and magnetic field fluctuations. Here we explore the related but apparently not well-studied issue of the anisotropy of plasma density fluctuations in the energy-containing and inertial ranges of solar wind turbulence. Using 10 years (1998-2008) of in situ data from the Advanced Composition Explorer (ACE) mission, we find that for all but the fastest wind category, the density correlation scale is slightly larger in directions quasi-parallel to the large-scale mean magnetic field as compared to quasi-perpendicular directions. The correlation scale in fast wind is consistent with isotropic. The anisotropy as a function of the level of correlation is also explored. We find at small correlation levels, i.e., at energy-containing scales and larger, the density fluctuations are close to isotropy for fast wind, and slightly favor more rapid decorrelation in perpendicular directions for slow and medium winds. At relatively smaller (inertial range) scales where the correlation values are larger, the sense of anisotropy is reversed in all speed ranges, implying a more "slab-like" structure, especially prominent in the fast wind samples. We contrast this finding with published results on velocity and magnetic field correlations. △ Less

Submitted 24 April, 2024; v1 submitted 7 February, 2024; originally announced February 2024.

Comments: 14 pages, 6 figures, accepted by the Astrophysical Journal

First (calibration) experiment using proton beam from FRENA at SINP

Authors: C. Basu, K. Banerjee, T. K. Ghosh, G. Mukherjee, C. Bhattacharya, Shraddha S Desai, R. Shil, A. K. Saha, J. K. Meena, T. Bar, D. Basak, L. K. Sahoo, S. Saha, C. Marick, D. Das, D. Das, D. Das, M. Kujur, S. Roy, S. S. Basu, U. Gond, A. Saha, A. Das, M. Samanta, P. Saha , et al. (1 additional authors not shown)

Abstract: This work presents the first calibration experiment of a 3 MV Tandetron accelerator, FRENA, performed in May 2022. The $^7$Li(p,n) reaction threshold was measured to calibrate the terminal voltage measuring device. A LiF target of thickness 175 $μ$g/cm$^2$ was used in the experiment. The measured threshold was 1872$\pm$2.7 keV, indicating 6$-$10 keV energy shift. This work presents the first calibration experiment of a 3 MV Tandetron accelerator, FRENA, performed in May 2022. The $^7$Li(p,n) reaction threshold was measured to calibrate the terminal voltage measuring device. A LiF target of thickness 175 $μ$g/cm$^2$ was used in the experiment. The measured threshold was 1872$\pm$2.7 keV, indicating 6$-$10 keV energy shift. △ Less

Submitted 24 January, 2024; originally announced February 2024.

Disorder-induced non-linear growth of viscously-unstable immiscible two-phase flow fingers in porous media

Authors: Santanu Sinha, Yves Méheust, Hursanay Fyhn, Subhadeep Roy, Alex Hansen

Abstract: The immiscible displacement of a fluid by another one inside a porous medium produces different types of patterns depending on the capillary number Ca and viscosity ratio M. At high Ca, viscous fingers resulting from the viscous instability between fluid-fluid interfaces are believed to exhibit the same Laplacian growth behavior as viscously-unstable fingers observed in Hele-Shaw cells by Saffman… ▽ More The immiscible displacement of a fluid by another one inside a porous medium produces different types of patterns depending on the capillary number Ca and viscosity ratio M. At high Ca, viscous fingers resulting from the viscous instability between fluid-fluid interfaces are believed to exhibit the same Laplacian growth behavior as viscously-unstable fingers observed in Hele-Shaw cells by Saffman and Taylor [1], or as diffusion limited aggregates (DLA) [2]. I.e., the interface velocity depends linearly on the local gradient of the physical field that drives the growth process (for two-phase flow, the pressure field). However, steady-state two-phase flow in porous media is known to exhibit a regime for which the flow rate depends as a non-linear power law on the global pressure drop, due to the disorder in the capillary barriers at pore throats. A similar nonlinear growth regime was also evidenced experimentally for viscously-unstable drainage in two-dimensional porous media 20 years ago [3]. Here we revisit this flow regime using dynamic pore-network modeling, and explore the non-linearity in the growth properties. We characterize the previously-unstudied dependencies of the statistical finger width and nonlinear growth law's exponent on Ca, and discuss quantitatively, based on theoretical arguments, how disorder in the capillary barriers controls the growth process' non-linearity, and why the flow regime crosses over to Laplacian growth at sufficiently high Ca. In addition, the statistical properties of the fingering patterns are compared to those of Saffman-Taylor fingers, DLA growth patterns, and the results from the aforementioned previous experimental study. △ Less

Submitted 22 December, 2023; originally announced December 2023.

Comments: 18 pages, 13 figures

Autoencoder-based analytic continuation method for strongly correlated quantum systems

Authors: Maksymilian Kliczkowski, Lauren Keyes, Sayantan Roy, Thereza Paiva, Mohit Randeria, Nandini Trivedi, Maciej M. Maska

Abstract: The single particle Green's function provides valuable information on the momentum and energy-resolved spectral properties for a strongly correlated system. In large-scale numerical calculations using quantum Monte Carlo (QMC), dynamical mean field theory (DMFT), including cluster-DMFT, one usually obtains the Green's function in imaginary-time $G(τ)$. The process of inverting a Laplace transform… ▽ More The single particle Green's function provides valuable information on the momentum and energy-resolved spectral properties for a strongly correlated system. In large-scale numerical calculations using quantum Monte Carlo (QMC), dynamical mean field theory (DMFT), including cluster-DMFT, one usually obtains the Green's function in imaginary-time $G(τ)$. The process of inverting a Laplace transform to obtain the spectral function $A(ω)$ in real-frequency is an ill-posed problem and forms the core of the analytic continuation problem. In this Letter, we propose to use a completely unsupervised autoencoder-type neural network to solve the analytic continuation problem. We introduce an encoder-decoder approach that, together with only minor physical assumptions, can extract a high-quality frequency response from the imaginary time domain. With a deeply tunable architecture, this method can, in principle, locate sharp features of spectral functions that might normally be lost using already well-established methods, such as maximum entropy (MaxEnt) methods. We demonstrate the strength of the autoencoder approach by applying it to QMC results of $G(τ)$ for a single-band Hubbard model. The proposed method is general and can also be applied to other ill-posed inverse problems. △ Less

Submitted 29 November, 2023; originally announced November 2023.

Comments: 7 pages, 5 figures, supplement

Journal ref: Phys. Rev. B 110, 115119 (2024)

Over 6 $μ$m thick MOCVD-grown Low-Background Carrier Density (10$^{15}$ cm$^{-3}$) High-Mobility (010) $β$-Ga$_2$O$_3$ Drift Layers

Authors: Arkka Bhattacharyya, Carl Peterson, Kittamet Chanchaiworawit, Saurav Roy, Yizheng Liu, Steve Rebollo, Sriram Krishnamoorthy

Abstract: This work reports high carrier mobilities and growth rates, simultaneously in low unintentionally-doped UID (10$^{15}$ cm$^{-3}$) MOCVD-grown thick $β$-Ga$_2$O$_3$ epitaxial drift layers, with thicknesses reaching up to 6.3 $μ$m, using triethylgallium (TEGa) as a precursor. Record high room temperature Hall mobilities of 187-190 cm$^2$/Vs were measured for background carrier density values of 2.4… ▽ More This work reports high carrier mobilities and growth rates, simultaneously in low unintentionally-doped UID (10$^{15}$ cm$^{-3}$) MOCVD-grown thick $β$-Ga$_2$O$_3$ epitaxial drift layers, with thicknesses reaching up to 6.3 $μ$m, using triethylgallium (TEGa) as a precursor. Record high room temperature Hall mobilities of 187-190 cm$^2$/Vs were measured for background carrier density values of 2.4 - 3.5$\times$10$^{15}$ cm$^{-3}$ grown at a rate of 2.2 $μ$m/hr. A controlled background carrier density scaling from 3.3$\times$10$^{16}$ cm$^{-3}$ to 2.4$\times$10$^{15}$ cm$^{-3}$ is demonstrated, without the use of intentional dopant gases such as silane, by controlling the growth rate and O$_2$/TEGa ratio. Films show smooth surface morphologies of 0.8-3.8 nm RMS roughness for film thicknesses of 1.24 - 6.3$μ$m. Vertical Ni Schottky barrier diodes (SBDs) fabricated on UID MOCVD material were compared with those fabricated on hydride vapor phase epitaxy (HVPE) material, revealing superior material and device characteristics. MOCVD SBDs on a 6.3 $μ$m thick epitaxial layer show a uniform charge vs. depth profile of $\sim$2.4$\times$10$^{15}$ cm$^{-3}$, an estimated $μ$$_{drift}$ of 132 cm$^2$/Vs, a breakdown voltage (V$_{BR}$) close to 1.2 kV and a surface parallel plane field of 2.05MV/cm without any electric field management - setting record-high parameters for any MOCVD-grown $β$-Ga$_2$O$_3$ vertical diode to date. △ Less

Submitted 23 November, 2023; originally announced November 2023.

Comments: 14 pages, 14 figures, 1 table

Maximizing Savonius Turbine Performance using Kriging Surrogate Model and Grey Wolf-Driven Cylindrical Deflector Optimization

Authors: Paras Singh, Vishal Jaiswal, Subhrajit Roy, Raj Kumar Singh

Abstract: With the growing demand for power and the pressing need to shift towards renewable energy sources, wind power stands as a vital component of the energy transition. To optimize energy production, researchers have focused on design optimization of Savonius-type vertical axis wind turbines (VAWTs). The current study utilizes Unsteady Reynolds-Averaged Navier Stokes (URANS) simulations using the slidi… ▽ More With the growing demand for power and the pressing need to shift towards renewable energy sources, wind power stands as a vital component of the energy transition. To optimize energy production, researchers have focused on design optimization of Savonius-type vertical axis wind turbines (VAWTs). The current study utilizes Unsteady Reynolds-Averaged Navier Stokes (URANS) simulations using the sliding mesh technique to obtain flow field data and power coefficients. A Kriging Surrogate model was trained on the numerical data of randomly initialized data points to construct a response surface model. Then Grey Wolf Optimization (GWO) algorithm was utilized to achieve global maxima on this surface, using the turbine's power coefficient as the objective function. A comparative analysis was carried out between simulation and experimental data from prior studies to validate the accuracy of the numerical model. The optimized turbine-deflector configuration showed a maximum improvement of 34.24% in power coefficient. Additionally, the GWO algorithm's effectiveness was compared with Particle Swarm Optimization (PSO) and was found to be better in most cases, converging towards the global maxima faster. This study explores a relatively unexplored realm of metaheuristic optimization of wind turbines by using deflectors, for efficient energy harvesting, presenting promising prospects for enhancing renewable power generation. △ Less

Submitted 10 November, 2023; originally announced November 2023.

Comments: Accepted at 10th International and 50th National Conference on Fluid Mechanics and Fluid Power (FMFP-2023): 6 pages, 12 figures

SPIRAL: An Efficient Algorithm for the Integration of the Equation of Rotational Motion

Authors: Carlos Andrés del Valle, Vasileios Angelidakis, Sudeshna Roy, José Daniel Muñoz, Thorsten Pöschel

Abstract: We introduce Spiral, a third-order integration algorithm for the rotational motion of extended bodies. It requires only one force calculation per time step, does not require quaternion normalization at each time step, and can be formulated for both leapfrog and synchronous integration schemes, making it compatible with many particle simulation codes. The stability and precision of Spiral exceed th… ▽ More We introduce Spiral, a third-order integration algorithm for the rotational motion of extended bodies. It requires only one force calculation per time step, does not require quaternion normalization at each time step, and can be formulated for both leapfrog and synchronous integration schemes, making it compatible with many particle simulation codes. The stability and precision of Spiral exceed those of state-of-the-art algorithms currently used in popular DEM codes such as Yade, MercuryDPM, LIGGGHTS, PFC, and more, at only slightly higher computational cost. Also, beyond DEM, we see potential applications in all numerical simulations that involve the 3D rotation of extended bodies. △ Less

Submitted 7 November, 2023; originally announced November 2023.

Comments: 25 pages, 9 figures

TiO2 multi-leg nanotubes for Surface-enhanced Raman scattering

Authors: Harini S, Garima Gupta, Somnath C. Roy, Rambabu Yalavarthi

Abstract: In the recent past, significant research efforts have been put forth to fabricate low-cost noble metal-free substrates for surface-enhanced Raman spectroscopy (SERS) applications. Here we propose semiconducting TiO2 multi-leg nanotubes (TiO2 MLNTs, with and without the gold nanoparticle coating) as SERS substrates. TiO2 MLNTs show unique multi-leg morphology compared to the conventional non-multi-… ▽ More In the recent past, significant research efforts have been put forth to fabricate low-cost noble metal-free substrates for surface-enhanced Raman spectroscopy (SERS) applications. Here we propose semiconducting TiO2 multi-leg nanotubes (TiO2 MLNTs, with and without the gold nanoparticle coating) as SERS substrates. TiO2 MLNTs show unique multi-leg morphology compared to the conventional non-multi-leg tubes and possess better light-harvesting properties. TiO2 MLNTs are fabricated with a simple and versatile single-step electrochemical anodization method. Remarkable high SERS sensitivity is observed towards the detection of Methylene blue (MB), up to nM concentration (E.F. ~104). The same is attributed to the resonantly matched photonic absorption edge of TiO2 MLNTs with the wavelength of incident laser probe light. On the other hand, gold nanoparticle-coated TiO2 MLNTs demonstrated further enhancement in SERS sensitivity (E.F. ~105, for nM of MB) facilitated by the synergy that exists between the plasmonic modes (LSPRs) of Au and the photonic absorption mode of TiO2 MLNTs. △ Less

Submitted 6 November, 2023; originally announced November 2023.

Journal ref: Journal of Physics D: Applied Physics, 2024-04-24

Efficient learning of arbitrary single-copy quantum states

Authors: Shibdas Roy, Filippo Caruso, Srushti Patil, Anumita Mukhopadhyay

Abstract: Quantum state tomography is the problem of estimating a given quantum state. Usually, it is required to run the quantum experiment - state preparation, state evolution, measurement - several times to be able to estimate the output quantum state of the experiment, because an exponentially high number of copies of the state is required. In this work, we present an efficient algorithm to estimate wit… ▽ More Quantum state tomography is the problem of estimating a given quantum state. Usually, it is required to run the quantum experiment - state preparation, state evolution, measurement - several times to be able to estimate the output quantum state of the experiment, because an exponentially high number of copies of the state is required. In this work, we present an efficient algorithm to estimate with a small but non-zero probability of error the output state of the experiment using a single copy of the state, without knowing the evolution dynamics of the state. It also does not destroy the original state, which can be recovered easily for any further quantum processing. As an example, it is usually required to repeat a quantum image processing experiment many times, since many copies of the state of the output image are needed to extract the information from all its pixels. The information from $\mathcal{N}$ pixels of the image can be inferred from a single run of the image processing experiment in our algorithm, to efficiently estimate the density matrix of the image state. △ Less

Submitted 29 April, 2025; v1 submitted 30 October, 2023; originally announced October 2023.

Comments: 6 pages, 3 figures, Accepted at IEEE qCCL 2025, Hong Kong

Radiation families emitted by a discrete soliton in parity-time-symmetric waveguide arrays

Authors: Anuj P. Lara, Ambaresh Sahoo, Samudra Roy

Abstract: We investigate the dynamics of a spatial discrete soliton and the radiation families emitted by it inside a parity-time ($\mathcal{PT}$)-symmetric waveguide array with alternate gain-loss channels. A strong spatial soliton that evolves inside the waveguide array due to the balance between discrete diffraction and Kerr nonlinearity excites linear waves in the form of diffractive radiation when laun… ▽ More We investigate the dynamics of a spatial discrete soliton and the radiation families emitted by it inside a parity-time ($\mathcal{PT}$)-symmetric waveguide array with alternate gain-loss channels. A strong spatial soliton that evolves inside the waveguide array due to the balance between discrete diffraction and Kerr nonlinearity excites linear waves in the form of diffractive radiation when launched with an angle. $\mathcal{PT}$-symmetric nature of the waveguide leads to additional radiations in Fourier space that were never explored before. In our work, we mainly focus on the origin of these radiations and try to understand how to control them. Under strong $\mathcal{PT}$ symmetry, a discrete soliton launched normally to the waveguide array produces strong side-lobes which can lead to a population of field at $\pm π/2$ in momentum space. In addition, a strong soliton with initial phase gradient radiates unique $\mathcal{PT}$ symmetry assisted linear wave. We establish a phase matching condition to locate such radiation in momentum space. The periodic arrangement of the gain-loss channel also leads to radiations due to reflection and back-scattering, which is prominent for a weak soliton. A linear Hamiltonian analysis for such a waveguide array is provided to identify the $\mathcal{PT}$-phase transition regime and to optimize the parameter for stable discrete soliton dynamics. We thoroughly investigate the origin of all the radiations that emerged in the $\mathcal{PT}$-symmetric waveguide array and put forward the background theory which is in good agreement with the full numerical results. △ Less

Submitted 30 October, 2023; originally announced October 2023.

Beam propagation in an active nonlinear graded-index fiber

Authors: Anuj P. Lara, Samudra Roy, Govind P. Agrawal

Abstract: A theoretical model is developed by exploiting the variational technique to investigate the evolution of an optical beam inside an optically pumped graded-index fiber amplifier. The variational analysis is a semi-analytical method that provides us with a set of coupled ordinary differential equations for the beam's four parameters. Numerical solution of these equations is much faster compared to t… ▽ More A theoretical model is developed by exploiting the variational technique to investigate the evolution of an optical beam inside an optically pumped graded-index fiber amplifier. The variational analysis is a semi-analytical method that provides us with a set of coupled ordinary differential equations for the beam's four parameters. Numerical solution of these equations is much faster compared to the underlying multidimensional nonlinear wave equation. We compare the results of the variational and full numerical simulations for the two pumping schemes used commonly for high-power fiber amplifiers. In the clad-pumping scheme, the use of a relatively wide pump beam results in a nearly uniform gain all along the fiber. In the case of edge pumping, a narrower pump beam provides gain that varies both radially and axially along the fiber's length. In both cases, the variational results are found to be in good agreement with time-consuming full numerical simulations. We also derive a single equation for the beam's width that can predict amplification-induced narrowing of the signal beam in most cases of practical interest. △ Less

Submitted 21 October, 2023; originally announced October 2023.

Comments: 6 pages, 5 figures

Approximate Expressions for the Capillary Force and the Surface Area of a Liquid Bridge between Identical Spheres

Authors: Meysam Bagheri, Sudeshna Roy, Thorsten Pöschel

Abstract: We consider a liquid bridge between two identical spheres and provide approximate expressions for the capillary force and the exposed surface area of the liquid bridge as functions of the liquid bridge's total volume and the sphere separation distance. The radius of the spheres and the solid-liquid contact angle are parameters that enter the expressions. These expressions are needed for efficient… ▽ More We consider a liquid bridge between two identical spheres and provide approximate expressions for the capillary force and the exposed surface area of the liquid bridge as functions of the liquid bridge's total volume and the sphere separation distance. The radius of the spheres and the solid-liquid contact angle are parameters that enter the expressions. These expressions are needed for efficient numerical simulations of drying suspensions. △ Less

Submitted 17 October, 2023; originally announced October 2023.

Comments: 24 pages, 14 figures

Open Hardware Solutions in Quantum Technology

Authors: Nathan Shammah, Anurag Saha Roy, Carmen G. Almudever, Sébastien Bourdeauducq, Anastasiia Butko, Gustavo Cancelo, Susan M. Clark, Johannes Heinsoo, Loïc Henriet, Gang Huang, Christophe Jurczak, Janne Kotilahti, Alessandro Landra, Ryan LaRose, Andrea Mari, Kasra Nowrouzi, Caspar Ockeloen-Korppi, Guen Prawiroatmodjo, Irfan Siddiqi, William J. Zeng

Abstract: Quantum technologies such as communications, computing, and sensing offer vast opportunities for advanced research and development. While an open-source ethos currently exists within some quantum technologies, especially in quantum computer programming, we argue that there are additional advantages in developing open quantum hardware (OQH). Open quantum hardware encompasses open-source software fo… ▽ More Quantum technologies such as communications, computing, and sensing offer vast opportunities for advanced research and development. While an open-source ethos currently exists within some quantum technologies, especially in quantum computer programming, we argue that there are additional advantages in developing open quantum hardware (OQH). Open quantum hardware encompasses open-source software for the control of quantum devices in labs, blueprints and open-source toolkits for chip design and other hardware components, as well as openly-accessible testbeds and facilities that allow cloud-access to a wider scientific community. We provide an overview of current projects in the OQH ecosystem, identify gaps, and make recommendations on how to close them today. More open quantum hardware would accelerate technology transfer to and growth of the quantum industry and increase accessibility in science. △ Less

Submitted 1 March, 2024; v1 submitted 29 September, 2023; originally announced September 2023.

Comments: 22 pages, 5 figures

Journal ref: APL Quantum 1, 011501 (2024)

AI Foundation Models for Weather and Climate: Applications, Design, and Implementation

Authors: S. Karthik Mukkavilli, Daniel Salles Civitarese, Johannes Schmude, Johannes Jakubik, Anne Jones, Nam Nguyen, Christopher Phillips, Sujit Roy, Shraddha Singh, Campbell Watson, Raghu Ganti, Hendrik Hamann, Udaysankar Nair, Rahul Ramachandran, Kommy Weldemariam

Abstract: Machine learning and deep learning methods have been widely explored in understanding the chaotic behavior of the atmosphere and furthering weather forecasting. There has been increasing interest from technology companies, government institutions, and meteorological agencies in building digital twins of the Earth. Recent approaches using transformers, physics-informed machine learning, and graph n… ▽ More Machine learning and deep learning methods have been widely explored in understanding the chaotic behavior of the atmosphere and furthering weather forecasting. There has been increasing interest from technology companies, government institutions, and meteorological agencies in building digital twins of the Earth. Recent approaches using transformers, physics-informed machine learning, and graph neural networks have demonstrated state-of-the-art performance on relatively narrow spatiotemporal scales and specific tasks. With the recent success of generative artificial intelligence (AI) using pre-trained transformers for language modeling and vision with prompt engineering and fine-tuning, we are now moving towards generalizable AI. In particular, we are witnessing the rise of AI foundation models that can perform competitively on multiple domain-specific downstream tasks. Despite this progress, we are still in the nascent stages of a generalizable AI model for global Earth system models, regional climate models, and mesoscale weather models. Here, we review current state-of-the-art AI approaches, primarily from transformer and operator learning literature in the context of meteorology. We provide our perspective on criteria for success towards a family of foundation models for nowcasting and forecasting weather and climate predictions. We also discuss how such models can perform competitively on downstream tasks such as downscaling (super-resolution), identifying conditions conducive to the occurrence of wildfires, and predicting consequential meteorological phenomena across various spatiotemporal scales such as hurricanes and atmospheric rivers. In particular, we examine current AI methodologies and contend they have matured enough to design and implement a weather foundation model. △ Less

Submitted 19 September, 2023; v1 submitted 19 September, 2023; originally announced September 2023.

Comments: 44 pages, 1 figure, updated Fig. 1

MSC Class: 68T07 (Primary); 68T01; 86A08 ACM Class: I.2.0; I.4.0; J.2.5

Interplay of degeneracy and non-degeneracy in fluctuations propagation in coherent feed-forward loop motif

Authors: Tuhin Subhra Roy, Mintu Nandi, Pinaki Chaudhury, Sudip Chattopadhyay, Suman K Banik

Abstract: We present a stochastic framework to decipher fluctuations propagation in classes of coherent feed-forward loops. The systematic contribution of the direct (one-step) and indirect (two-step) pathways is considered to quantify fluctuations of the output node. We also consider both additive and multiplicative integration mechanisms of the two parallel pathways (one-step and two-step). Analytical exp… ▽ More We present a stochastic framework to decipher fluctuations propagation in classes of coherent feed-forward loops. The systematic contribution of the direct (one-step) and indirect (two-step) pathways is considered to quantify fluctuations of the output node. We also consider both additive and multiplicative integration mechanisms of the two parallel pathways (one-step and two-step). Analytical expression of the output node's coefficient of variation shows contributions of intrinsic, one-step, two-step, and cross-interaction in closed form. We observe a diverse range of degeneracy and non-degeneracy in each of the decomposed fluctuations term and their contribution to the overall output fluctuations of each coherent feed-forward loop motif. Analysis of output fluctuations reveals a maximal level of fluctuations of the coherent feed-forward loop motif of type 1. △ Less

Submitted 29 August, 2023; originally announced August 2023.

Comments: 20 pages, 4 figures

Journal ref: J. Stat. Mech. 2023 (2023) 093502

Doppler-Enhanced Quantum Magnetometry with thermal Rydberg atoms

Authors: Shovan Kanti Barik, Silpa B S, M Venkat Ramana, Shovan Dutta, Sanjukta Roy

Abstract: We report experimental measurements showing how one can combine quantum interference and thermal Doppler shifts at room temperature to detect weak magnetic fields. We pump ${}^{87}$Rb atoms to a highly-excited, Rydberg level using a probe and a coupling laser, leading to narrow transmission peaks of the probe due to destructive interference of transition amplitudes, known as Electromagnetically In… ▽ More We report experimental measurements showing how one can combine quantum interference and thermal Doppler shifts at room temperature to detect weak magnetic fields. We pump ${}^{87}$Rb atoms to a highly-excited, Rydberg level using a probe and a coupling laser, leading to narrow transmission peaks of the probe due to destructive interference of transition amplitudes, known as Electromagnetically Induced Transparency (EIT). While it is customary in such setups to use counterpropagating lasers to minimize the effect of Doppler shifts, here we show, on the contrary, that one can harness Doppler shifts in a copropagating arrangement to produce an enhanced response to a magnetic field. In particular, we demonstrate an order-of-magnitude bigger splitting in the transmission spectrum as compared to the counterpropagating case. We explain and generalize our findings with theoretical modelling and simulations based on a Lindblad master equation. Our results pave the way to using quantum effects for magnetometry in readily deployable room-temperature platforms. △ Less

Submitted 9 August, 2023; originally announced August 2023.

Journal ref: New J. Phys. 26, 073036 (2024)

Curvature screening in draped mechanical metamaterial sheet

Authors: Sourav Roy, C. D. Santangelo

Abstract: We develop a framework to understand the mechanics of metamaterial sheets on curved surfaces. Here we have constructed a continuum elastic theory of mechanical metamaterials by introducing an auxiliary, scalar gauge-like field that absorbs the strain along the soft mode and projects out the stiff ones. We propose a general form of the elastic energy of a mechanism based metamaterial sheet and spec… ▽ More We develop a framework to understand the mechanics of metamaterial sheets on curved surfaces. Here we have constructed a continuum elastic theory of mechanical metamaterials by introducing an auxiliary, scalar gauge-like field that absorbs the strain along the soft mode and projects out the stiff ones. We propose a general form of the elastic energy of a mechanism based metamaterial sheet and specialize to the cases of dilational metamaterials and shear metamaterials conforming to positively and negatively curved substrates in the Föppl-Von Kármán limit of small strains. We perform numerical simulations of these systems and obtain good agreement with our analytical predictions. This work provides a framework that can be easily extended to explore non-linear soft modes in metamaterial elasticity in future. △ Less

Submitted 12 October, 2023; v1 submitted 7 August, 2023; originally announced August 2023.

Comments: 9 pages, 5 figures

Giant conductance of PSS:PEDOT micro-surfaces induced by microbubble lithography

Authors: Anand Dev Ranjan, Rakesh Sen, Sumeet Kumar, Rahul Vaippully, Soumya Dutta, Soumyajit Roy, Basudev Roy, Ayan Banerjee

Abstract: We provide direct evidence of the effects of interface engineering of various substrates by Microbubble lithography (MBL). We choose a model organic plastic (or polymer) poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS), with conductivity of 140 S/cm, as a representative organic system to showcase our technique. Thus, we fabricate permanent patterns of PEDOT:PSS on glass, followed… ▽ More We provide direct evidence of the effects of interface engineering of various substrates by Microbubble lithography (MBL). We choose a model organic plastic (or polymer) poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS), with conductivity of 140 S/cm, as a representative organic system to showcase our technique. Thus, we fabricate permanent patterns of PEDOT:PSS on glass, followed by a flexible PDMS substrate, and observe conductivity enhancement of 5 times on the former (694 S/cm), and 20 times (2844 S/cm) on the latter, without the use of external doping agents or invasive chemical treatment. Probing the patterned interface, we observe that MBL is able to tune the conformational states of PEDOT:PSS from coils in the pristine form, to extended coils on glass, and almost linear structures in PDMS due to its more malleable liquid-like interface. This results in higher ordering and vanishing grain boundaries leading to the highest conductivity of PEDOT:PSS on PDMS substrates. △ Less

Submitted 26 July, 2023; originally announced July 2023.

Time resolved eye diagrams to exploit hidden high energy branches in a nonlinear wideband vibration energy harvester

Authors: Kankana Paul, Saibal Roy, Andreas Amann

Abstract: A wideband vibration energy harvester with multiple nonlinear forces is investigated. The nonlinearities are due to repulsive magnets and hardening springs, which gives rise to multistabilities between a number of energy branches. Not all branches are accessible by a simple up or down sweep of the driving frequency and in particular the highest energy branch is often hidden, requiring a suitable f… ▽ More A wideband vibration energy harvester with multiple nonlinear forces is investigated. The nonlinearities are due to repulsive magnets and hardening springs, which gives rise to multistabilities between a number of energy branches. Not all branches are accessible by a simple up or down sweep of the driving frequency and in particular the highest energy branch is often hidden, requiring a suitable frequency schedule to be accessed. Detailed theoretical understanding of the energy branch structure along with robust experimental methods are essential for characterizing each of the energy branches to enhance the energy output from such vibration energy harvesting system. We introduce a graphical representation in the form of eye diagrams based on time-resolved measurements of acceleration and output voltage to study the dynamical features of the different branches. This generic approach allows us to optimize the design, which results in 1.3mW of power generated at 1g over 44Hz frequency bandwidth while maintaining a small footprint of $1.23 cm^3$. The energy conversion ratio of the energy harvester at 120Hz drive frequency is 0.52 for the high energy branch. △ Less

Submitted 11 July, 2023; originally announced July 2023.

Towards Stirling engine using an optically confined particle subjected to asymmetric temperature profile

Authors: Gokul Nalupurackal, Muruga Lokesh, Sarangi Suresh, Srestha Roy, Snigdhadev Chakraborty, Jayesh Goswami, Arnab Pal, Basudev Roy

Abstract: The realization of microscopic heat engines has gained a surge of research interest in statistical physics, soft matter, and biological physics. A typical microscopic heat engine employs a colloidal particle trapped in a confining potential, which is modulated in time to mimic the cycle operations. Here, we use a lanthanide-doped upconverting particle (UCP) suspended in a passive aqueous bath, whi… ▽ More The realization of microscopic heat engines has gained a surge of research interest in statistical physics, soft matter, and biological physics. A typical microscopic heat engine employs a colloidal particle trapped in a confining potential, which is modulated in time to mimic the cycle operations. Here, we use a lanthanide-doped upconverting particle (UCP) suspended in a passive aqueous bath, which is highly absorptive at 975 nm and converts NIR photons to visible, as the working substance of the engine. When a single UCP is optically trapped with a 975 nm laser, it behaves like an active particle by executing motion subjected to an asymmetric temperature profile along the direction of propagation of the laser. The strong absorption of 975 nm light by the particle introduces a temperature gradient and results in significant thermophoretic diffusion along the temperature gradient. However, the activity of the particle vanishes when the trapping wavelength is switched to 1064 nm. We carefully regulate the wavelength-dependent activity of the particle to engineer all four cycles of a Stirling engine by using a combination of 1064 nm and 975 nm wavelengths. Since the motion of the particle is stochastic, the work done on the particle due to the stiffness modulation per cycle is random. We provide statistical estimation for this work averaged over 5 cycles which can be extended towards several cycles to make a Stirling engine. Our experiment proposes a robust set-up to systematically harness temperature which is a crucial factor behind building microscopic engines. △ Less

Submitted 27 June, 2023; originally announced June 2023.

Comments: For published version, see https://iopscience.iop.org/article/10.1088/1367-2630/acd94e/meta

Journal ref: New J. Phys. 25 063001 (2023)

Spatial beam dynamics in graded-index multimode fibers under Raman amplification:a variational approach

Authors: Ashis Paul, Anuj P. Lara, Samudra Roy, Govind P. Agrawal

Abstract: We investigate the spatial beam dynamics inside a multimode graded-index fiber under Raman amplification by adopting a semi-analytical variational approach. The variational analysis provides us with four coupled ordinary differential equations that govern the beam's dynamics under Raman gain and are much faster to solve numerically compared to the full nonlinear wave equation. Their solution also… ▽ More We investigate the spatial beam dynamics inside a multimode graded-index fiber under Raman amplification by adopting a semi-analytical variational approach. The variational analysis provides us with four coupled ordinary differential equations that govern the beam's dynamics under Raman gain and are much faster to solve numerically compared to the full nonlinear wave equation. Their solution also provides considerable physical insight and allows us to study the impact of important nonlinear phenomena such as self-focusing and cross-phase modulation. We first show that the variational results corroborate well with full numerical simulations and then use them to investigate the signal's dynamics under different initial conditions such as the initial widths of the pump and signal beams. This allows us to quantify the conditions under which the quality of a signal beam can improve, without collapse of the beam owing to self-focusing. While time-consuming full simulations may be needed when gain saturation and pump depletion must be included, the variational method is useful for gaining valuable physical insight and for studying dependence of the amplified beam's width and amplitude on various physical parameters in a faster fashion. △ Less

Submitted 28 June, 2023; v1 submitted 24 June, 2023; originally announced June 2023.

Comments: 7 pages, 6 figures