Showing 1–46 of 46 results for author: Roy, B

A label-free sub-diffractive technique for 3D intracellular tomography using thermally induced convection currents

Authors: Jayesh Goswami, Shataneek Banerjee, Snigdhadev Chakraborty, Srestha Roy, Atanu Ghosh, Mrutyunjaya Rath, Agniva Das, Mukul Sagar, Krishna Kumari Swain, Prasanta Pal, Basudev Roy

Abstract: Conventionally, 3-dimensional cellular tomography can be done with light sheet or multi-angle observations. Recently, a new technique was introduced where the cell was rotated using convection currents to visualize the outer periphery (Liu et al., Nano Lett., 2023, 23, 5148). However, the work falls short of actually observing intracellular objects like organelles etc. In this manuscript, we modif… ▽ More Conventionally, 3-dimensional cellular tomography can be done with light sheet or multi-angle observations. Recently, a new technique was introduced where the cell was rotated using convection currents to visualize the outer periphery (Liu et al., Nano Lett., 2023, 23, 5148). However, the work falls short of actually observing intracellular objects like organelles etc. In this manuscript, we modify the technique by relying on computer vision algorithm called Contrast Limited Adaptive Histogram Equalisation (CLAHE) to improve the contrast for better detection of intra-cellular points, and then use optical flow detection technique to extract the in-plane speed of the point. This then is used to extract the vertical location, knowing that at the bottom part of the sphere, the point would be moving in one direction, close to the center there would be much less motion, while in the top portion of the sphere, the point would be moving in the reverse direction than the bottom. The velocity allows the exact localisation of the point in the vertical direction. This process allows for sub-diffractive intracellular tomography. This technique can further allow high-resolution detection of fluorescent molecules inside the cell also, when combined with convective flows. △ Less

Submitted 15 May, 2025; originally announced May 2025.

Intracellular phagosome shell is rigid enough to transfer outside torque to the inner spherical particle

Authors: Srestha Roy, Arvin Gopal Subramaniam, Snigdhadev Chakraborty, Jayesh Goswami, Subastri Ariraman, Krishna Kumari Swain, Swathi Sudhakar, Rajesh Singh, Basudev Roy

Abstract: Intracellular phagosomes have a lipid bilayer encapsulated fluidic shell outside the particle, on the outer side of which, molecular motors are attached. An optically trapped spherical birefringent particle phagosome provides an ideal platform to probe fluidity of the shell, as the inner particle is optically confined both in translation and in rotation. Using a recently reported method to calibra… ▽ More Intracellular phagosomes have a lipid bilayer encapsulated fluidic shell outside the particle, on the outer side of which, molecular motors are attached. An optically trapped spherical birefringent particle phagosome provides an ideal platform to probe fluidity of the shell, as the inner particle is optically confined both in translation and in rotation. Using a recently reported method to calibrate the translation and pitch rotations - yielding a spatial resolution of about 2 nm and angular resolution of 0.1 degrees - we report novel roto-translational coupled dynamics. We also suggest a new technique where we explore the correlation between the translation and pitch rotation to study extent of activity. Given that a spherical birefringent particle phagosome is almost a sphere, the fact that it turns due to the activity of the motors is not obvious, even implying high rigidity of shell. Applying a minimal model for the roto-translational coupling, we further show that this coupling manifests itself as sustained fluxes in phase space, a signature of broken detailed balance. △ Less

Submitted 11 April, 2025; originally announced April 2025.

Comments: *equal contribution, ‡ joint corresponding author

Observation of non-Hermitian dislocation bound states and dislocation skin effects

Authors: Jia-Xin Zhong, Bitan Roy, Yun Jing

Abstract: The confluence of Non-Hermitian (NH) topology and crystal defects has culminated significant interest, yet its experimental exploration has been limited due to the challenges involved in design and measurements. Here, we showcase experimental observation of NH dislocation bound states (NHDS) and the dislocation-induced NH skin effect in two-dimensional acoustic NH Chern lattices. By embedding edge… ▽ More The confluence of Non-Hermitian (NH) topology and crystal defects has culminated significant interest, yet its experimental exploration has been limited due to the challenges involved in design and measurements. Here, we showcase experimental observation of NH dislocation bound states (NHDS) and the dislocation-induced NH skin effect in two-dimensional acoustic NH Chern lattices. By embedding edge dislocations in such acoustic lattices and implementing precision-controlled hopping and onsite gain/loss via active meta-atoms, we reveal robust defect-bound states localized at dislocation cores within the line gap of the complex energy spectrum. These NHDS survive against moderate NH perturbations but gradually delocalize and merge with the bulk (skin) states as the system arrives at the shore of fostering exceptional points in the Brillouin zone under periodic (open) boundary conditions. Furthermore, our experiments demonstrate that the dislocation core can feature weak NH skin effects when its direction is perpendicular to the Burgers vector in periodic systems. Our findings pave an experimental pathway for probing NH topology via lattice defects and open new avenues for defect-engineered topological devices. △ Less

Submitted 3 April, 2025; originally announced April 2025.

Comments: 6 pages, 5 figures, 1 supplementary material

Feedback controlled microengine powered by motor protein

Authors: Suraj Deshmukh, Basudha Roy, Sougata Guha, Shivprasad Patil, Arnab Saha, Sudipto Muhuri

Abstract: We present a template for realization of a novel microengine which is able to harness and convert the activity driven movement of individual motor protein into work output of the system. This engine comprises of a micron size bead-motor protein complex that is subject to a time-varying, feedback controlled optical potential, and a driving force due to the action of the motor protein which stochast… ▽ More We present a template for realization of a novel microengine which is able to harness and convert the activity driven movement of individual motor protein into work output of the system. This engine comprises of a micron size bead-motor protein complex that is subject to a time-varying, feedback controlled optical potential, and a driving force due to the action of the motor protein which stochastically binds, walks and unbinds to an underlying microtubule filament. Using a Stochastic thermodynamics framework and theoretical modeling of bead-motor transport in a harmonic optical trap potential, we obtain the engine characteristics, e.g., work output per cycle, power generated, efficiency and the probability distribution function of the work output as a function of motor parameters and optical trap stiffness. The proposed engine is a work-to-work converter. Remarkably, the performance of this engine can vastly supersede the performance of other microengines that have been realized so far for feasible biological parameter range for kinesin-1 and kinesin-3 motor proteins. In particular, the work output per cycle is ~ (10-15) k_b T while the power output is (5-8) k_b T s^{-1}. Furthermore, we find that even with time delay in feedback protocol, the performance of the engine remains robust as long as the delay time is much smaller than the Brownian relaxation time of the micron size bead. Indeed such low delay time in feedback in the optical trap setup can easily be achieved with current Infrared (IR) lasers and optical trap sensor. The average work output and power output of the engine, exhibits interesting non-monotonic dependence on motor velocity and optical trap stiffness. As such this motor protein driven microengine can be a promising potential prototype for fabricating an actual microdevice engine which can have practical utility. △ Less

Submitted 10 April, 2025; v1 submitted 10 March, 2025; originally announced March 2025.

Comments: 18 pages, 8 figures

Attosecond pulses from a solid driven by a synthesized two-color field at megahertz repetition rate

Authors: Zhaopin Chen, Mark Levit, Yuval Kern, Basabendra Roy, Adi Goldner, Michael Krüger

Abstract: Probing coherent quantum dynamics in light-matter interactions at the microscopic level requires high-repetition-rate isolated attosecond pulses (IAPs) in pump-probe experiments. To date, the generation of IAPs has been mainly limited to the kilohertz regime. In this work, we experimentally achieve attosecond control of extreme-ultraviolet (XUV) high harmonics in the wide-bandgap dielectric MgO, d… ▽ More Probing coherent quantum dynamics in light-matter interactions at the microscopic level requires high-repetition-rate isolated attosecond pulses (IAPs) in pump-probe experiments. To date, the generation of IAPs has been mainly limited to the kilohertz regime. In this work, we experimentally achieve attosecond control of extreme-ultraviolet (XUV) high harmonics in the wide-bandgap dielectric MgO, driven by a synthesized field of two femtosecond pulses at 800nm and 2000nm with relative phase stability. The resulting quasi-continuous harmonic plateau with ~ 9 eV spectral width centered around 16.5 eV photon energy can be tuned by the two-color phase and supports the generation of an IAP (~ 730 attoseconds), confirmed by numerical simulation based on three-band semiconductor Bloch equations. Leveraging the high-repetition-rate driver laser and the moderate intensity requirements of solid-state high-harmonic generation, we achieve IAP production at an unprecedented megahertz repetition rate, paving the way for all-solid compact XUV sources for IAP generation. △ Less

Submitted 11 October, 2024; originally announced October 2024.

Comments: 28 pages, 10 figures

Journal ref: ACS Photonics 2025,12, 5, 2819-2827

Giant conductance of PSS:PEDOT micro-surfaces induced by microbubble lithography

Authors: Anand Dev Ranjan, Rakesh Sen, Sumeet Kumar, Rahul Vaippully, Soumya Dutta, Soumyajit Roy, Basudev Roy, Ayan Banerjee

Abstract: We provide direct evidence of the effects of interface engineering of various substrates by Microbubble lithography (MBL). We choose a model organic plastic (or polymer) poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS), with conductivity of 140 S/cm, as a representative organic system to showcase our technique. Thus, we fabricate permanent patterns of PEDOT:PSS on glass, followed… ▽ More We provide direct evidence of the effects of interface engineering of various substrates by Microbubble lithography (MBL). We choose a model organic plastic (or polymer) poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS), with conductivity of 140 S/cm, as a representative organic system to showcase our technique. Thus, we fabricate permanent patterns of PEDOT:PSS on glass, followed by a flexible PDMS substrate, and observe conductivity enhancement of 5 times on the former (694 S/cm), and 20 times (2844 S/cm) on the latter, without the use of external doping agents or invasive chemical treatment. Probing the patterned interface, we observe that MBL is able to tune the conformational states of PEDOT:PSS from coils in the pristine form, to extended coils on glass, and almost linear structures in PDMS due to its more malleable liquid-like interface. This results in higher ordering and vanishing grain boundaries leading to the highest conductivity of PEDOT:PSS on PDMS substrates. △ Less

Submitted 26 July, 2023; originally announced July 2023.

Artificial Intelligence for the Electron Ion Collider (AI4EIC)

Authors: C. Allaire, R. Ammendola, E. -C. Aschenauer, M. Balandat, M. Battaglieri, J. Bernauer, M. Bondì, N. Branson, T. Britton, A. Butter, I. Chahrour, P. Chatagnon, E. Cisbani, E. W. Cline, S. Dash, C. Dean, W. Deconinck, A. Deshpande, M. Diefenthaler, R. Ent, C. Fanelli, M. Finger, M. Finger, Jr., E. Fol, S. Furletov , et al. (70 additional authors not shown)

Abstract: The Electron-Ion Collider (EIC), a state-of-the-art facility for studying the strong force, is expected to begin commissioning its first experiments in 2028. This is an opportune time for artificial intelligence (AI) to be included from the start at this facility and in all phases that lead up to the experiments. The second annual workshop organized by the AI4EIC working group, which recently took… ▽ More The Electron-Ion Collider (EIC), a state-of-the-art facility for studying the strong force, is expected to begin commissioning its first experiments in 2028. This is an opportune time for artificial intelligence (AI) to be included from the start at this facility and in all phases that lead up to the experiments. The second annual workshop organized by the AI4EIC working group, which recently took place, centered on exploring all current and prospective application areas of AI for the EIC. This workshop is not only beneficial for the EIC, but also provides valuable insights for the newly established ePIC collaboration at EIC. This paper summarizes the different activities and R&D projects covered across the sessions of the workshop and provides an overview of the goals, approaches and strategies regarding AI/ML in the EIC community, as well as cutting-edge techniques currently studied in other experiments. △ Less

Submitted 17 July, 2023; originally announced July 2023.

Comments: 27 pages, 11 figures, AI4EIC workshop, tutorials and hackathon

Towards Stirling engine using an optically confined particle subjected to asymmetric temperature profile

Authors: Gokul Nalupurackal, Muruga Lokesh, Sarangi Suresh, Srestha Roy, Snigdhadev Chakraborty, Jayesh Goswami, Arnab Pal, Basudev Roy

Abstract: The realization of microscopic heat engines has gained a surge of research interest in statistical physics, soft matter, and biological physics. A typical microscopic heat engine employs a colloidal particle trapped in a confining potential, which is modulated in time to mimic the cycle operations. Here, we use a lanthanide-doped upconverting particle (UCP) suspended in a passive aqueous bath, whi… ▽ More The realization of microscopic heat engines has gained a surge of research interest in statistical physics, soft matter, and biological physics. A typical microscopic heat engine employs a colloidal particle trapped in a confining potential, which is modulated in time to mimic the cycle operations. Here, we use a lanthanide-doped upconverting particle (UCP) suspended in a passive aqueous bath, which is highly absorptive at 975 nm and converts NIR photons to visible, as the working substance of the engine. When a single UCP is optically trapped with a 975 nm laser, it behaves like an active particle by executing motion subjected to an asymmetric temperature profile along the direction of propagation of the laser. The strong absorption of 975 nm light by the particle introduces a temperature gradient and results in significant thermophoretic diffusion along the temperature gradient. However, the activity of the particle vanishes when the trapping wavelength is switched to 1064 nm. We carefully regulate the wavelength-dependent activity of the particle to engineer all four cycles of a Stirling engine by using a combination of 1064 nm and 975 nm wavelengths. Since the motion of the particle is stochastic, the work done on the particle due to the stiffness modulation per cycle is random. We provide statistical estimation for this work averaged over 5 cycles which can be extended towards several cycles to make a Stirling engine. Our experiment proposes a robust set-up to systematically harness temperature which is a crucial factor behind building microscopic engines. △ Less

Submitted 27 June, 2023; originally announced June 2023.

Comments: For published version, see https://iopscience.iop.org/article/10.1088/1367-2630/acd94e/meta

Journal ref: New J. Phys. 25 063001 (2023)

Light-activated memristor by Au-nanoparticle embedded HfO$_2$-bilayer/p-Si MOS device

Authors: Ankita Sengupta, Basudev Nag Chowdhury, Bodhishatwa Roy, Biswarup Satpati, Satyaban Bhunia, Sanatan Chattopadhyay

Abstract: The current work proposes a novel scheme for developing a light-activated non-filamentary memristor device by fabricating an Au-nanoparticle embedded HfO$_2$-bilayer/p-Si MOS structure. Under illumination, the electrons in such embedded Au-nanoparticles are excited from d-level to quantized s-p level and are swept out on application of an appropriate gate bias, leaving behind the holes without rec… ▽ More The current work proposes a novel scheme for developing a light-activated non-filamentary memristor device by fabricating an Au-nanoparticle embedded HfO$_2$-bilayer/p-Si MOS structure. Under illumination, the electrons in such embedded Au-nanoparticles are excited from d-level to quantized s-p level and are swept out on application of an appropriate gate bias, leaving behind the holes without recombination. Such photogenerated holes are confined within the nanoparticles and thus screen the external field to lead to a memristive effect in the device. The phenomenon is experimentally observed in the fabricated Pt/HfO$_2$-(layer-II)/Au-NPs/HfO$_2$-(layer-I)/p-Si devices, where such memristive effect is activated/deactivated by light pulses. The memory window and high-to-low resistance ratio of the device are obtained to be ~1 V and ~10, respectively, which suggest the performance of a standard state-of-the-art memristor. Further, the present device offers a voltage-sweep-endurance up to at least 150 cycles and the memory retention up to ~10,000 s. Such a device concept can be extended for a combination of different nanoparticles with various dimensions and dielectric layers to optimize their memristive effect for achieving CMOS-compatible memory devices with superior reliability. △ Less

Submitted 27 May, 2023; originally announced June 2023.

Supervised learning applied to high-dimensional millimeter wave transient absorption data for age prediction of perovskite thin-film

Authors: Biswadev Roy, A. Karoui, B. Vlahovic, M. H. Wu

Abstract: We have analyzed a limited sample set of 120 GHz, and 150 GHz time-resolved millimeter wave (mmW) photoconductive decay (mmPCD) signals of 300 nm thick air-stable encapsulated perovskite film (methyl-ammonium lead halide) excited using a pulsed 532-nm laser with fluence 10.6 micro-Joules per cm-2. We correlated 12 parameters derived directly from acquired mmPCD kinetic-trace data and its step-resp… ▽ More We have analyzed a limited sample set of 120 GHz, and 150 GHz time-resolved millimeter wave (mmW) photoconductive decay (mmPCD) signals of 300 nm thick air-stable encapsulated perovskite film (methyl-ammonium lead halide) excited using a pulsed 532-nm laser with fluence 10.6 micro-Joules per cm-2. We correlated 12 parameters derived directly from acquired mmPCD kinetic-trace data and its step-response, each with the sample-age based on the date of the experiment. Five parameters with a high negative correlation with sample age were finally selected as predictors in the Gaussian Process Regression (GPR) machine learning model for prediction of the age of the sample. The effects of aging (between 0 and 40,000 hours after film production) are quantified mainly in terms of a shift in peak voltage, the response ratio (conductance parameter), loss-compensated transmission coefficient, and the radiofrequency (RF) area of the transient itself (flux). Changes in the other step-response parameters and the decay length of the aging transients are also shown. The GPR model is found to work well for a forward prediction of the age of the sample using this method. It is noted that the Matern-5 over 2 GPR kernel for supervised learning provides the best realistic solution for age prediction with R squared around 0.97. △ Less

Submitted 4 November, 2022; originally announced November 2022.

Roadmap for Optical Tweezers

Authors: Giovanni Volpe, Onofrio M. Maragò, Halina Rubinzstein-Dunlop, Giuseppe Pesce, Alexander B. Stilgoe, Giorgio Volpe, Georgiy Tkachenko, Viet Giang Truong, Síle Nic Chormaic, Fatemeh Kalantarifard, Parviz Elahi, Mikael Käll, Agnese Callegari, Manuel I. Marqués, Antonio A. R. Neves, Wendel L. Moreira, Adriana Fontes, Carlos L. Cesar, Rosalba Saija, Abir Saidi, Paul Beck, Jörg S. Eismann, Peter Banzer, Thales F. D. Fernandes, Francesco Pedaci , et al. (58 additional authors not shown)

Abstract: Optical tweezers are tools made of light that enable contactless pushing, trapping, and manipulation of objects ranging from atoms to space light sails. Since the pioneering work by Arthur Ashkin in the 1970s, optical tweezers have evolved into sophisticated instruments and have been employed in a broad range of applications in life sciences, physics, and engineering. These include accurate force… ▽ More Optical tweezers are tools made of light that enable contactless pushing, trapping, and manipulation of objects ranging from atoms to space light sails. Since the pioneering work by Arthur Ashkin in the 1970s, optical tweezers have evolved into sophisticated instruments and have been employed in a broad range of applications in life sciences, physics, and engineering. These include accurate force and torque measurement at the femtonewton level, microrheology of complex fluids, single micro- and nanoparticle spectroscopy, single-cell analysis, and statistical-physics experiments. This roadmap provides insights into current investigations involving optical forces and optical tweezers from their theoretical foundations to designs and setups. It also offers perspectives for applications to a wide range of research fields, from biophysics to space exploration. △ Less

Submitted 28 June, 2022; originally announced June 2022.

Comments: 181 pages, 61 figures

Plasmonics enabled atomically thin linearly polarized emitter at room temperature

Authors: Bidisha Roy, Maex Blauth, Siddharth Dhomkar, Michael Kaniber, Vinod M. Menon, Jonathan. J. Finley

Abstract: Two-dimensional transition metal di-chalcogenide semiconductors provide unique possibilities to investigate strongly confined excitonic physics and a plasmonic platform integrable to such materials constitutes a hybrid system that can be of interest to enable manipulation of their cumulative optical properties. Here we report tuning of excitonic emission from monolayer WSe2, mechanically exfoliate… ▽ More Two-dimensional transition metal di-chalcogenide semiconductors provide unique possibilities to investigate strongly confined excitonic physics and a plasmonic platform integrable to such materials constitutes a hybrid system that can be of interest to enable manipulation of their cumulative optical properties. Here we report tuning of excitonic emission from monolayer WSe2, mechanically exfoliated on top of a periodic two dimensional plasmonic array of elliptical gold (Au) nanodiscs. By exploiting the polarization-dependent nature of plasmonic resonance of the nano plasmonic array (NPA), the photoluminescence (PL) emission from the overlaid monolayer WSe2 could be significantly manipulated. PL is preferentially enhanced at the NPA covered regions of the ake when excited closer to the plasmonic resonant frequencies and previously unpolarized WSe2 PL emission gained ~ 20 up to 40 % degree of linear polarization at room temperature. Obtaining significant spectral overlap between the PL spectrum of WSe2 and the polarization tunable plasmonic resonance of the NPA plays a crucial role in this observation. The results demonstrate active tunability of optical emission from WSe2 by using an otherwise passive plasmonic environment and open the possibility of achieving atomically thin linearly polarized emitters at room temperature. In addition to fundamentally interesting physics of such interactions this can be highly desirable for ultrathin orientation sensitive opto-electronic device related applications. △ Less

Submitted 25 May, 2022; originally announced May 2022.

Comments: 9 pages, 3 Figures

Simultaneous optical trapping and magnetic micromanipulation of ferromagnetic iron-doped upconversion microparticles in six degrees of freedom

Authors: Gokul Nalupurackal, Gunaseelan M, Muruga Lokesh, Rahul Vaippully, Amit Chauhan, B. R. K. Nanda, Chandran Sudakar, Hema Chandra Kotamarthi, Anita Jannasch, Erik Schffer, Jayaraman Senthilselvan, Basudev Roy

Abstract: Optical trapping of magnetic Fe-oxide particles is notoriously difficult due to their high refractive indices, not to mention high absorptivity at the trapping infra-red wavelengths. We synthesize Fe co-doped NaYF4:Yb,Er ferromagnetic upconversion particles that not only have refractive indices conducive for optical trapping, but also heat less than Haematite particles at off-resonant wavelengths.… ▽ More Optical trapping of magnetic Fe-oxide particles is notoriously difficult due to their high refractive indices, not to mention high absorptivity at the trapping infra-red wavelengths. We synthesize Fe co-doped NaYF4:Yb,Er ferromagnetic upconversion particles that not only have refractive indices conducive for optical trapping, but also heat less than Haematite particles at off-resonant wavelengths. These particles are hexagonal shaped with dimensions of the order of 3 micrometer and also bear high coercivity of 20 mT and saturation magnetisation of 1 Am^2/kg. This enables simultaneous use of optical trapping and magnetic forces to generate micro-manipulation in all the six degrees of freedom of a rigid body. We also show that these particles heat significantly when illuminated on absorption resonance at 975 nm while emitting visible light with possible implications for fluorescence microscopy and photothermal therapy of cancer cells. △ Less

Submitted 7 March, 2022; v1 submitted 4 March, 2022; originally announced March 2022.

Comments: 18 pages, 10 figures

Characteristics of room temperature bipolar photoconductance in 150 GHz probe transients obtained from normal and irradiated silicon illuminated by 532 nm laser

Authors: Biswadev Roy, Branislav Vlahovic, Marvin H. Wu

Abstract: A negative kink in excess conductivity is observed in p-type non-degenerate (moderate dopant concentration) silicon wafers when excited by a very narrow pulse of 532 nm laser appearing just after the complete positive decay of dark conductivity voltage. Most of the Si samples are pristine, and 3 of them are irradiated with gamma, proton, and chlorine ion beams respectively. These transients were e… ▽ More A negative kink in excess conductivity is observed in p-type non-degenerate (moderate dopant concentration) silicon wafers when excited by a very narrow pulse of 532 nm laser appearing just after the complete positive decay of dark conductivity voltage. Most of the Si samples are pristine, and 3 of them are irradiated with gamma, proton, and chlorine ion beams respectively. These transients were examined using a time-resolved millimeter-wave conductivity apparatus (TRmmWC ) and the radiofrequency (RF) voltage response (after laser cut-off) consistently reveals a positive peak with nominal decay to zero followed by a negative kink. This negative photoconductivity (NPC) kink develops just after the complete decay of the positive photoconductivity (PPC) and lasts typically ~ 36 us. We present some data on general characteristics obtained from a set of normal (pristine doped Si) wafers and the gamma- and ion beam irradiated silicon (comparing with the parent pristine sample responses) for establishing possible new links that might enable estimation of defect parameters introduced in silicon. △ Less

Submitted 27 September, 2021; originally announced September 2021.

Biological effects of low power nonionizing radiation: A Narrative Review

Authors: Biswadev Roy, Suryakant Niture, Marvin H. Wu

Abstract: Background and controlled electromagnetic radiation (EMR) on biological cells and tissues induces thermal, non-thermal, and dielectric property change. After EMR interaction with cells/tissues the resulting signal is used for imaging, bio-molecular response, and photo-biomodulation studies at infrared regime, and for therapeutic use. We attempt to present a review of current literature with a focu… ▽ More Background and controlled electromagnetic radiation (EMR) on biological cells and tissues induces thermal, non-thermal, and dielectric property change. After EMR interaction with cells/tissues the resulting signal is used for imaging, bio-molecular response, and photo-biomodulation studies at infrared regime, and for therapeutic use. We attempt to present a review of current literature with a focus to present compilation of published experimental results for each regime viz. microwave (extremely low frequency, ELF to 3 GHz), to cellular communication frequencies (100 KHz to 300 GHz), millimeter wave (300 GHz- 1 THz), and the infra-red band extending up to 461 THz. A unique graphical representation of frequency effects and their relevant significance in detection of direct biological effects, therapeutic applications and biophysical interpretation is presented. A total of seventy research papers from peer-reviewed journals were used to compile a mixture of useful information, all presented in a narrative style. Out of the Journal articles used for this paper, 63 journal articles were published between 2000 to 2020. Physical, biological, and therapeutic mechanisms of thermal, non-thermal and complex dielectric effects of EMR on cells are all explained in relevant sections of this paper. A broad up to date review for the EMR range KHz-NIR (kilohertz to near infra-red) is prepared. Published reports indicate that number of biological cell irradiation impact studies fall off rapidly beyond a few THz EMR, leading to relatively a smaller number of studies in FIR and NIR bands covering most of the thermal effects and microthermal effects, and rotation-vibration effects. △ Less

Submitted 22 December, 2020; v1 submitted 2 October, 2020; originally announced October 2020.

Detection of sub-degree fluctuations of the local cellmembrane slope using optical tweezers

Authors: Rahul Vaippully, Vaibavi Ramanujan, Manoj Gopalakrishnan, Saumendra Bajpai, Basudev Roy

Abstract: Normal thermal fluctuations of the cell membrane have been studied extensively using high resolution microscopy and focused light, particularly at the peripheral regions of a cell. We use a single probe particle attached non-specifically to the cell-membrane to determine that the power spectral density is proportional to (frequency)^(-1.66) in the range of 5 Hz to 1 kHz. We also use a new techniqu… ▽ More Normal thermal fluctuations of the cell membrane have been studied extensively using high resolution microscopy and focused light, particularly at the peripheral regions of a cell. We use a single probe particle attached non-specifically to the cell-membrane to determine that the power spectral density is proportional to (frequency)^(-1.66) in the range of 5 Hz to 1 kHz. We also use a new technique to simultaneously ascertain the slope fluctuations of the membrane by relying upon the determination of pitch motion of the birefringent probe particle trapped in linearly polarized optical tweezers. In the process, we also develop the technique to identify pitch rotation to a high resolu-tion using optical tweezers. We find that the power spectrum of slope fluctuations is proportional to 1/(frequency), which we also explain theoretically. We find that we can extract parameters like bending rigidity directly from the coefficient of the power spectrum particularly at high frequencies,instead of being convoluted with other parameters, thereby improving the accuracy of estimation.We anticipate this technique for determination of the pitch angle in spherical particles to high resolution as a starting point for many interesting studies using the optical tweezers △ Less

Submitted 13 April, 2020; originally announced April 2020.

Pitch-rotational manipulation of single cells and particles using single-beam thermo-optical tweezers

Authors: Sumeet Kumar, M. Gunaseelan, Rahul Vaippully, Amrendra Kumar, Mithun Ajith, Gaurav Vaidya, Soumya Dutta, Basudev Roy

Abstract: 3D pitch rotation of microparticles and cells assumes importance in a wide variety of applications in biology, physics, chemistry and medicine. Applications such as cell imaging and injection benefit from pitch-rotational manipulation. Generation of such motion in single beam optical tweezers has remained elusive due to complicacies of generating high enough ellipticity perpendicular to the direct… ▽ More 3D pitch rotation of microparticles and cells assumes importance in a wide variety of applications in biology, physics, chemistry and medicine. Applications such as cell imaging and injection benefit from pitch-rotational manipulation. Generation of such motion in single beam optical tweezers has remained elusive due to complicacies of generating high enough ellipticity perpendicular to the direction of propagation. Further, trapping an extended object at two locations can only generate partial pitch motion by moving one of the foci in the axial direction. Here, we use hexagonal-shaped upconverting particles and single cells trapped close to a gold-coated glass cover slip in a sample chamber to generate complete 360 degree and continuous pitch motion even with a single optical tweezers beam. The tweezers beam passing through the gold surface is partially absorbed and generates a hot-spot to produce circulatory convective flows in the vicinity which rotates the objects. The rotation rate can be controlled by the intensity of the laser light and the thickness of the gold layer. Thus such a simple configuration can turn the particle in the pitch sense. The circulatory flows in this technique have a diameter of about 5 $μ$m which is smaller than those reported using acousto-fluidic techniques. △ Less

Submitted 9 March, 2020; originally announced March 2020.

Technical Design Report for the PANDA Endcap Disc DIRC

Authors: Panda Collaboration, F. Davi, W. Erni, B. Krusche, M. Steinacher, N. Walford, H. Liu, Z. Liu, B. Liu, X. Shen, C. Wang, J. Zhao, M. Albrecht, T. Erlen, F. Feldbauer, M. Fink, V. Freudenreich, M. Fritsch, F. H. Heinsius, T. Held, T. Holtmann, I. Keshk, H. Koch, B. Kopf, M. Kuhlmann , et al. (441 additional authors not shown)

Abstract: PANDA (anti-Proton ANnihiliation at DArmstadt) is planned to be one of the four main experiments at the future international accelerator complex FAIR (Facility for Antiproton and Ion Research) in Darmstadt, Germany. It is going to address fundamental questions of hadron physics and quantum chromodynamics using cooled antiproton beams with a high intensity and and momenta between 1.5 and 15 GeV/c.… ▽ More PANDA (anti-Proton ANnihiliation at DArmstadt) is planned to be one of the four main experiments at the future international accelerator complex FAIR (Facility for Antiproton and Ion Research) in Darmstadt, Germany. It is going to address fundamental questions of hadron physics and quantum chromodynamics using cooled antiproton beams with a high intensity and and momenta between 1.5 and 15 GeV/c. PANDA is designed to reach a maximum luminosity of 2x10^32 cm^2 s. Most of the physics programs require an excellent particle identification (PID). The PID of hadronic states at the forward endcap of the target spectrometer will be done by a fast and compact Cherenkov detector that uses the detection of internally reflected Cherenkov light (DIRC) principle. It is designed to cover the polar angle range from 5° to 22° and to provide a separation power for the separation of charged pions and kaons up to 3 standard deviations (s.d.) for particle momenta up to 4 GeV/c in order to cover the important particle phase space. This document describes the technical design and the expected performance of the novel PANDA Disc DIRC detector that has not been used in any other high energy physics experiment (HEP) before. The performance has been studied with Monte-Carlo simulations and various beam tests at DESY and CERN. The final design meets all PANDA requirements and guarantees suffcient safety margins. △ Less

Submitted 29 December, 2019; originally announced December 2019.

Comments: TDR for Panda/Fair to be published

In-vivo characterization of optically trapped Brownianprobes at a glance

Authors: Rahul Vaippully, Vaibavi Ramanujan, Saumendra Bajpai, Basudev Roy

Abstract: Calibration of optically trapped particles in-vivo has been complicated given the frequency dependence and spatial inhomogeneity of the cytoplasmic viscosity, and the requirement of accurate knowledge of the medium refractive index. Further, it has been demonstrated that the medium viscosity is dependent upon the measurement probe leading to reliability issues for measurements with even micrometer… ▽ More Calibration of optically trapped particles in-vivo has been complicated given the frequency dependence and spatial inhomogeneity of the cytoplasmic viscosity, and the requirement of accurate knowledge of the medium refractive index. Further, it has been demonstrated that the medium viscosity is dependent upon the measurement probe leading to reliability issues for measurements with even micrometer sized particles. Here, we employ a recent extension of Jeffery's model of viscoelasticity in the microscopic domain to fit the passive motional power spectra of micrometer-sized optically trapped particles embedded in a viscoelastic medium. We find excellent agreement between the 0 Hz viscosity in MCF7 cells and the typical values of viscosity in literature, between 2 to 16 mPa sec expected for the typical concentration of proteins inside the cytoplasmic solvent. This bypasses the dependence on probe size by relying upon small thermal displacements. Our measurements of the relaxation time also match values reported with magnetic tweezers, at about 0.1 sec. Finally, we calibrate the optical tweezers and demonstrate the efficacy of the technique to the study of in-vivo translational motion. △ Less

Submitted 18 September, 2019; originally announced September 2019.

Self-assembly and complex manipulation of colloidal mesoscopic particles by active thermocapillary stress

Authors: Subhrokoli Ghosh, Aritra Biswas, Basudev Roy, Ayan Banerjee

Abstract: We demonstrate that the active thermocapillary stresses induced by multiple microbubbles offer simple routes to directed self-assembly and complex but controllable micromanipulation of mesoscopic colloidal particles embedded in a liquid. The microbubbles are nucleated on a liquid-glass interface using optical tweezers. The flow around a single bubble causes self-assembly of the particles in rings… ▽ More We demonstrate that the active thermocapillary stresses induced by multiple microbubbles offer simple routes to directed self-assembly and complex but controllable micromanipulation of mesoscopic colloidal particles embedded in a liquid. The microbubbles are nucleated on a liquid-glass interface using optical tweezers. The flow around a single bubble causes self-assembly of the particles in rings at the bubble-base, while an asymmetric temperature profile generated across the bubble interface breaks the azimuthal symmetry of the flow, and induces simultaneous accumulation and repulsion of particles at different axial planes with respect to the bubble. The flows due to two adjacent bubbles lead to more diverse effects including the sorting of particles, and to local vorticity that causes radial and axial rotation of the particles - the latter being obtained for the first time using optical tweezers. The sorting is enabled by nucleating the bubbles on spatially discrete temperature profiles, while the vorticity is generated by nucleating them in the presence of a temperature gradient which once again causes a strong symmetry-breaking in the azimuthal flow. The flow profiles obtained in the experiments are explained by analytical solutions or qualitative explanations of the associated thermocapillary problem employing the Stokes and heat equations. △ Less

Submitted 25 March, 2019; originally announced March 2019.

Comments: Supplementary information is available upon request

Detection of self-generated nanowaves on the interface of an evaporating sessile water droplet

Authors: Dhanush Bhatt, Rahul Vaippully, Bhavesh Kharbanda, Anand Dev Ranjan, Sulochana R., Viraj Dharod, Basudev Roy

Abstract: Evaporating sessile droplets have been known to exhibit oscillations on the air-liquid interface. These are generally over millimeter scales. Using a novel approach, we are able to measure surface height changes of 500 nm amplitude using optical trapping of a set of microscopic particles at the interface, particularly when the vertical thickness of the droplet reduces to less than 50 $μ$m. We find… ▽ More Evaporating sessile droplets have been known to exhibit oscillations on the air-liquid interface. These are generally over millimeter scales. Using a novel approach, we are able to measure surface height changes of 500 nm amplitude using optical trapping of a set of microscopic particles at the interface, particularly when the vertical thickness of the droplet reduces to less than 50 $μ$m. We find that at the later stages of the droplet evaporation, particularly when the convection currents become large, the top air-water interface starts to spontaneously oscillate vertically as a function of time in consistency with predictions. We also detect travelling wave trains moving in the azimuthal direction of the drop surface which are consistent with hydrothermal waves at a different combination of Reynolds, Prandtl and Evaporation than previously observed. This is the first time that wave-trains have been observed in water, being extremely challenging to detect both interferometrically and with infra-red cameras. We also find that such waves apply a force parallel to the interface along the propagation direction. △ Less

Submitted 5 February, 2019; originally announced February 2019.

Comments: 5 pages

Study of adhesivity of surfaces using rotational optical tweezers

Authors: Rahul Vaipully, Dhanush Bhatt, Anand Dev Ranjan, Basudev Roy

Abstract: Optical tweezers are powerful tools for high resolution study of surface properties. Such experiments are traditionally performed by studying the active or the brownian fluctuation of trapped particles in the X, Y, Z direction. Here we find that employing the fourth dimension, rotation, allows for sensitive and fast probing of the surface. Optical tweezers are capable of rotating trapped birefring… ▽ More Optical tweezers are powerful tools for high resolution study of surface properties. Such experiments are traditionally performed by studying the active or the brownian fluctuation of trapped particles in the X, Y, Z direction. Here we find that employing the fourth dimension, rotation, allows for sensitive and fast probing of the surface. Optical tweezers are capable of rotating trapped birefringent microparticles when applied with circularly polarized light, thus called the Rotational Optical Tweezers. When the trapped birefringent microparticle is far enough away from the surface, the rotation rate is dependent only on the laser power. However, we find that if one traps close to a surface, the rotation rate goes to zero even at finite tweezers laser powers for some specific type of substrates. We suspect this to be due to interaction between the substrate and the birefringent particle, keeping in mind that the hydrodynamic drag for this mode of rotation cannot increase beyond 1.2 times the drag away from the surface. We use this to probe some surfaces and find that there is no binding for hydrophobic ones but hydrophilic ones particularly tend to show a power threshold beyond which the birefringent particle starts rotating. We calculate that the threshold energy of the tweezers is consistent with the Van der Waals potential energy, when the mode of interaction with the surface is purely physical. We also find that for chitosan, the mode of interaction is possibly different from Van der Waals. We place the particle on the threshold and observe stick-slip kind of rotational behaviour. △ Less

Submitted 10 November, 2018; originally announced November 2018.

Comments: 4 pages

How pump-probe differential reflectivity at negative delay yields the perturbed free-induction-decay: Theory of the experiment and its verification

Authors: Richarj Mondal, Basabendra Roy, Bipul Pal, Bhavtosh Bansal

Abstract: While time-resolved pump-probe differential reflectivity and transmitivity measurements are routinely used to monitor the population relaxation dynamics on the subpicosecond time scale, it is also known that the signal in the negative delay can yield direct signatures of the perturbed-free-induction-decay of polarization. Yet this technique, especially in reflection geometry, has never been popula… ▽ More While time-resolved pump-probe differential reflectivity and transmitivity measurements are routinely used to monitor the population relaxation dynamics on the subpicosecond time scale, it is also known that the signal in the negative delay can yield direct signatures of the perturbed-free-induction-decay of polarization. Yet this technique, especially in reflection geometry, has never been popular because the experiment is conceptually not very intuitive. Coherent dynamics is therefore usually studied using the more complex four-wave-mixing experiments. Here we derive from first principles the simplest possible but mathematically complete framework for the negative delay signal in both the time and the spectral domains. The calculation involving the optical Bloch equations to describe the induced polarization and the Ewald-Oseen idea to calculate the reflected signal as a consequence of the free oscillations of perturbed dipoles, also explicitly includes the process of lock-in detection of a double-chopped signal after it has passed through a monochromator. The theory is compared with experiments on high quality GaAs quantum well sample. The dephasing time inferred experimentally at 4 K compares remarkably well with the inverse of the absorption linewidth of the continuous-wave photoluminescence excitation spectrum. Spectrally resolved signal at negative delay calculated from our theoretical expression nicely reproduces the coherent spectral oscillations, although exact fitting of the experimental spectra with the theoretical expression is difficult. This is on account of additional resonances present in the sample corresponding to lower energy bound states. △ Less

Submitted 2 September, 2018; originally announced September 2018.

Comments: 20 pages, 5 figures

Microscopic approach to understand Brownian dynamics in viscoelastic fluid

Authors: Shuvojit Paul, Basudev Roy, Ayan Banerjee

Abstract: We present an entirely microscopic formulation of viscoleasticity of a fluid starting from the microscopic Stokes-Oldroyd B Model assuming instantaneous hydrodynamic friction, and show that linearization leads to a form for the frequency dependent viscosity that can be directly applied to the Langevin equation. Interestingly, the calculated expression of viscosity can be directly mapped to the Jef… ▽ More We present an entirely microscopic formulation of viscoleasticity of a fluid starting from the microscopic Stokes-Oldroyd B Model assuming instantaneous hydrodynamic friction, and show that linearization leads to a form for the frequency dependent viscosity that can be directly applied to the Langevin equation. Interestingly, the calculated expression of viscosity can be directly mapped to the Jeffreys' model which is essentially macroscopic in nature with the bulk viscoelasticity of the fluid being characterized by a complex elastic modulus G(ω). Further, we demonstrate that the concerned Green's function is same as that in an incompressible, low Reynold's number Newtonian fluid with the simple incorporation of frequency dependence in the viscosity term. We proceed to evaluate the trajectory of a free Brownian particle in a viscoelastic environment using our formalism and calculate parameters such as the power spectral density, the autocorrelation function and the mean-square displacement, which we then extend to the particle confined in a harmonic potential in the fluid. △ Less

Submitted 13 March, 2018; originally announced March 2018.

Comments: 7 pages, 6 figures

Influence of material parameters on the performance of niobium based superconducting RF cavities

Authors: Arup Ratan Jana, Abhay Kumar, Vinit Kumar, Sindhunil Barman Roy

Abstract: A detailed thermal analysis of a Niobium (Nb) based superconducting radio frequency (SRF) cavity in a liquid helium bath is presented, taking into account the temperature and magnetic field dependence of the surface resistance and thermal conductivity in the superconducting state of the starting Nb material (for SRF cavity fabrication) with different impurity levels. The drop in SRF cavity quality… ▽ More A detailed thermal analysis of a Niobium (Nb) based superconducting radio frequency (SRF) cavity in a liquid helium bath is presented, taking into account the temperature and magnetic field dependence of the surface resistance and thermal conductivity in the superconducting state of the starting Nb material (for SRF cavity fabrication) with different impurity levels. The drop in SRF cavity quality factor (Q_0) in the high acceleration gradient regime (before ultimate breakdown of the SRF cavity) is studied in details. It is argued that the high field Q_0-drop in SRF cavity is considerably influenced by the intrinsic material parameters such as electrical conductivity, and thermal diffusivity. The detail analysis also shows that the current specification on the purity of niobium material for SRF cavity fabrication is somewhat over specified. Niobium material with a relatively low purity can very well serve the purpose for the accelerators dedicated for spallation neutron source (SNS) or accelerator driven sub-critical system (ADSS) applications, where the required accelerating gradient is typically up to 20 MV/m,. This information will have important implication towards the cost reduction of superconducting technology based particle accelerators for various applications. △ Less

Submitted 5 February, 2018; v1 submitted 23 March, 2017; originally announced March 2017.

Comments: 16 pages, 8 Figures

Feasibility study for the measurement of $πN$ TDAs at PANDA in $\bar{p}p\to J/ψπ^0$

Authors: PANDA Collaboration, B. Singh, W. Erni, B. Krusche, M. Steinacher, N. Walford, H. Liu, Z. Liu, B. Liu, X. Shen, C. Wang, J. Zhao, M. Albrecht, T. Erlen, M. Fink, F. H. Heinsius, T. Held, T. Holtmann, S. Jasper, I. Keshk, H. Koch, B. Kopf, M. Kuhlmann, M. Kümmel, S. Leiber , et al. (488 additional authors not shown)

Abstract: The exclusive charmonium production process in $\bar{p}p$ annihilation with an associated $π^0$ meson $\bar{p}p\to J/ψπ^0$ is studied in the framework of QCD collinear factorization. The feasibility of measuring this reaction through the $J/ψ\to e^+e^-$ decay channel with the PANDA (AntiProton ANnihilation at DArmstadt) experiment is investigated. Simulations on signal reconstruction efficiency as… ▽ More The exclusive charmonium production process in $\bar{p}p$ annihilation with an associated $π^0$ meson $\bar{p}p\to J/ψπ^0$ is studied in the framework of QCD collinear factorization. The feasibility of measuring this reaction through the $J/ψ\to e^+e^-$ decay channel with the PANDA (AntiProton ANnihilation at DArmstadt) experiment is investigated. Simulations on signal reconstruction efficiency as well as the background rejection from various sources including the $\bar{p}p\toπ^+π^-π^0$ and $\bar{p}p\to J/ψπ^0π^0$ reactions are performed with PandaRoot, the simulation and analysis software framework of the PANDA experiment. It is shown that the measurement can be done at PANDA with significant constraining power under the assumption of an integrated luminosity attainable in four to five months of data taking at the maximum design luminosity. △ Less

Submitted 7 October, 2016; originally announced October 2016.

Comments: 25 pages, 22 figures

Journal ref: Phys. Rev. D 95, 032003 (2017)

Simultaneous detection of rotational and translational motion in optical tweezers by measurement of backscattered intensity

Authors: Basudev Roy, Sudipta K. Bera, Ayan Banerjee

Abstract: We describe a simple yet powerful technique of simultaneously measuring both translational and rotational motion of mesoscopic particles in optical tweezers by measuring the backscattered intensity on a quadrant photodiode (QPD). While the measurement of translational motion by taking the difference of the backscattered intensity incident on adjacent quadrants of a QPD is well-known, we demonstrat… ▽ More We describe a simple yet powerful technique of simultaneously measuring both translational and rotational motion of mesoscopic particles in optical tweezers by measuring the backscattered intensity on a quadrant photodiode (QPD). While the measurement of translational motion by taking the difference of the backscattered intensity incident on adjacent quadrants of a QPD is well-known, we demonstrate that rotational motion can be measured very precisely by taking the difference between the diagonal quadrants. The latter measurement eliminates the translational component entirely, and leads to a detection sensitivity of around 50 mdeg at S/N of 2 for angular motion of a driven micro-rod. The technique is also able to resolve the translational and rotational Brownian motion components of the micro-rod in an unperturbed trap, and can be very useful in measuring translation-rotation coupling of micro-objects induced by hydrodynamic interactions. △ Less

Submitted 16 May, 2014; originally announced May 2014.

Journal ref: June 15, 2014 / Vol. 39, No. 12 / Optics Letters

Enhanced topological phase and spin Hall shifts in an optical trap

Authors: Basudev Roy, Nirmalya Ghosh, Subhasish Dutta Gupta, Soumyajit Roy, Ayan Banerjee

Abstract: The spin orbit interaction (SOI) of light has been in the focus in recent times because of fundamental consequences and potential applications in diverse systems ranging from inhomogeneous anisotropic media to engineered plasmonics and metamaterial strutures. Here we demonstrate perhaps one of the simplest means to realize SOI and the Spin Hall Shift (SHS) using a standard Gaussian TEM$_{00}$ beam… ▽ More The spin orbit interaction (SOI) of light has been in the focus in recent times because of fundamental consequences and potential applications in diverse systems ranging from inhomogeneous anisotropic media to engineered plasmonics and metamaterial strutures. Here we demonstrate perhaps one of the simplest means to realize SOI and the Spin Hall Shift (SHS) using a standard Gaussian TEM$_{00}$ beam in an optical trap. Our system exploits the versatility and interference generated in a stratified medium to control and manipulate SOI and transfer the resulting angular momentum to optically trapped micro-particles. We show that even such a simple setup can lead to an order of magnitude enhancement in the SHS compared to the sub-wavelength shifts typically obtained. Importantly, this leads to controlled rotation of mesoscopic particles using a fundamental Gaussian beam lacking any intrinsic angular momentum. △ Less

Submitted 28 September, 2013; originally announced September 2013.

Comments: 13 pages, 4 figures

Micro-OptoMechanical Movements (MOMs) with SoftOxometalates (SOMs): Controlled Motion of Single Soft-Oxometalate Pea-pods Using Exotic Optical Potentials

Authors: Basudev Roy, Atharva Sahasrabudhe, Bibudha Parasar, Nirmalya Ghosh, Prasanta Panigrahi, Ayan Banerjee, Soumyajit Roy

Abstract: An important challenge in the field of materials design and synthesis is to deliberately design mesoscopic objects starting from well-defined precursors and inducing directed movements in them to emulate biological processes. Recently, mesoscopic metal-oxide based Soft Oxo Metalates (SOMs) have been synthesized from well-defined molecular precursors transcending the regime of translational periodi… ▽ More An important challenge in the field of materials design and synthesis is to deliberately design mesoscopic objects starting from well-defined precursors and inducing directed movements in them to emulate biological processes. Recently, mesoscopic metal-oxide based Soft Oxo Metalates (SOMs) have been synthesized from well-defined molecular precursors transcending the regime of translational periodicity. Here we show that it is actually possible to controllably move such an asymmetric SOM-with the shape of a `pea-pod' along complex paths using tailor-made sophisticated optical potentials created by spin-orbit interaction due to a tightly focused linearly polarized Gaussian beam propagating through stratified media in an optical trap. We demonstrate motion of individual trapped SOMs along circular paths of more than 15 $μ$m in a perfectly controlled manner by simply varying the input polarization of the trapping laser. Such controlled motion can have a wide range of application starting from catalysis to the construction of dynamic mesoscopic architectures. △ Less

Submitted 26 May, 2013; v1 submitted 8 August, 2012; originally announced August 2012.

Comments: 13 pages, 5 figures

Controlled transportation of mesoscopic particles by enhanced spin orbit interaction of light in an optical trap

Authors: Basudev Roy, Nirmalya Ghosh, Subhasish Dutta Gupta, Prasanta K. Panigrahi, Soumyajit Roy, Ayan Banerjee

Abstract: We study the effects of the spin orbit interaction (SOI) of light in an optical trap and show that the propagation of the tightly focused trapping beam in a stratified medium can lead to significantly enhanced SOI. For a plane polarized incident beam the SOI manifests itself by giving rise to a strong anisotropic linear diattenuation effect which produces polarization-dependent off-axis high inten… ▽ More We study the effects of the spin orbit interaction (SOI) of light in an optical trap and show that the propagation of the tightly focused trapping beam in a stratified medium can lead to significantly enhanced SOI. For a plane polarized incident beam the SOI manifests itself by giving rise to a strong anisotropic linear diattenuation effect which produces polarization-dependent off-axis high intensity side lobes near the focal plane of the trap. Single micron-sized asymmetric particles can be trapped in the side lobes, and transported over circular paths by a rotation of the plane of input polarization. We demonstrate such controlled motion on single pea-pod shaped single soft oxometalate (SOM) particles of dimension around $1\times 0.5μ$m over lengths up to $\sim$15 $μ$m . The observed effects are supported by calculations of the intensity profiles based on a variation of the Debye-Wolf approach. The enhanced SOI could thus be used as a generic means of transporting mesoscopic asymmetric particles in an optical trap without the use of complex optical beams or changing the alignment of the beam into the trap. △ Less

Submitted 5 February, 2013; v1 submitted 27 June, 2012; originally announced June 2012.

Comments: 9 pages, 7 figures

Technical Design Report for the: PANDA Straw Tube Tracker

Authors: PANDA Collaboration, W. Erni, I. Keshelashvili, B. Krusche, M. Steinacher, Y. Heng, Z. Liu, H. Liu, X. Shen, Q. Wang, H. Xu, A. Aab, M. Albrecht, J. Becker, A. Csapó, F. Feldbauer, M. Fink, P. Friedel, F. H. Heinsius, T. Held, L. Klask, H. Koch, B. Kopf, S. Leiber, M. Leyhe , et al. (451 additional authors not shown)

Abstract: This document describes the technical layout and the expected performance of the Straw Tube Tracker (STT), the main tracking detector of the PANDA target spectrometer. The STT encloses a Micro-Vertex-Detector (MVD) for the inner tracking and is followed in beam direction by a set of GEM-stations. The tasks of the STT are the measurement of the particle momentum from the reconstructed trajectory an… ▽ More This document describes the technical layout and the expected performance of the Straw Tube Tracker (STT), the main tracking detector of the PANDA target spectrometer. The STT encloses a Micro-Vertex-Detector (MVD) for the inner tracking and is followed in beam direction by a set of GEM-stations. The tasks of the STT are the measurement of the particle momentum from the reconstructed trajectory and the measurement of the specific energy-loss for a particle identification. Dedicated simulations with full analysis studies of certain proton-antiproton reactions, identified as being benchmark tests for the whole PANDA scientific program, have been performed to test the STT layout and performance. The results are presented, and the time lines to construct the STT are described. △ Less

Submitted 4 June, 2012; v1 submitted 24 May, 2012; originally announced May 2012.

Comments: accepted for publication on EPJA

Journal ref: Eur. Phys. J. A (2013) 49: 25

Effect of Position-dependent Mass on Dynamical Breaking of Type B and Type X_2 N-fold Supersymmetry

Authors: Bikashkali Midya, Barnana Roy, Toshiaki Tanaka

Abstract: We investigate effect of position-dependent mass profiles on dynamical breaking of N-fold supersymmetry in several type B and type X_2 models. We find that N-fold supersymmetry in rational potentials in the constant-mass background are steady against the variation of mass profiles. On the other hand, some physically relevant mass profiles can change the pattern of dynamical N-fold supersymmetry br… ▽ More We investigate effect of position-dependent mass profiles on dynamical breaking of N-fold supersymmetry in several type B and type X_2 models. We find that N-fold supersymmetry in rational potentials in the constant-mass background are steady against the variation of mass profiles. On the other hand, some physically relevant mass profiles can change the pattern of dynamical N-fold supersymmetry breaking in trigonometric, hyperbolic, and exponential potentials of both type B and type X_2. The latter results open the possibility of detecting experimentally phase transition of N-fold as well as ordinary supersymmetry at a realistic energy scale. △ Less

Submitted 3 April, 2012; originally announced April 2012.

Comments: 24 pages, no figures, to appear in Journal of Physics A

Report number: TH-1536

Journal ref: Journal of Physics A 45 (2012) 205303

High flux cold Rubidium atomic beam for strongly coupled Cavity QED

Authors: Basudev Roy, Michael Scholten

Abstract: This paper presents a setup capable of producing a high-flux continuous beam of cold rubidium atoms for cavity QED experiments in the regime of strong coupling. A 2 $D^+$ MOT, loaded by rubidium getters in a dry film coated vapor cell, fed a secondary moving-molasses MOT (MM-MOT) at a rate of 1.5 x $10^{10}$ atoms/sec. The MM-MOT provided a continuous beam with tunable velocity. This beam was then… ▽ More This paper presents a setup capable of producing a high-flux continuous beam of cold rubidium atoms for cavity QED experiments in the regime of strong coupling. A 2 $D^+$ MOT, loaded by rubidium getters in a dry film coated vapor cell, fed a secondary moving-molasses MOT (MM-MOT) at a rate of 1.5 x $10^{10}$ atoms/sec. The MM-MOT provided a continuous beam with tunable velocity. This beam was then directed through the waist of a 280 $μ$m cavity resulting in a Rabi splitting of more than +/- 10 MHz. The presence of sufficient number of atoms in the cavity mode also enabled splitting in the polarization perpendicular to the input. The cavity was in the strong coupling regime, with parameters (g, $κ$, $γ$)/2$π$ equal to (7, 3, 6)/ 2$π$ MHz. △ Less

Submitted 1 August, 2012; v1 submitted 15 February, 2012; originally announced February 2012.

Comments: Journal paper

Probing the dynamics of an optically trapped particle by phase sensitive back focal plane interferometry

Authors: Basudev Roy, Sambit Bikas Pal, Arijit Haldar, Ratnesh Kumar Gupta, Nirmalya Ghosh, Ayan Banerjee

Abstract: The dynamics of an optically trapped particle are often determined by measuring intensity shifts of the back-scattered light from the particle using position sensitive detectors. We present a technique which measures the phase of the back-scattered light using balanced detection in an external Mach-Zender interferometer scheme where we separate out and beat the scattered light from the bead and th… ▽ More The dynamics of an optically trapped particle are often determined by measuring intensity shifts of the back-scattered light from the particle using position sensitive detectors. We present a technique which measures the phase of the back-scattered light using balanced detection in an external Mach-Zender interferometer scheme where we separate out and beat the scattered light from the bead and that from the top surface of our trapping chamber. The technique has improved axial motion resolution over intensity-based detection, and can also be used to measure lateral motion of the trapped particle. In addition, we are able to track the Brownian motion of trapped 1 and 3 $μ$m diameter beads from the phase jitter and show that, similar to intensity-based measurements, phase measurements can also be used to simultaneously determine displacements of the trapped bead as well as the spring constant of the trap. For lateral displacements, we have matched our experimental results with a simulation of the overall phase contour of the back-scattered light for lateral displacements by using plane wave decomposition in conjunction with Mie scattering theory. The position resolution is limited by path drifts of the interferometer which we have presently reduced to obtain a displacement resolution of around 2 nm for 1.1 $μ$m diameter probes by locking the interferometer to a frequency stabilized diode laser. △ Less

Submitted 11 January, 2012; originally announced January 2012.

Comments: 10 pages, 7 figures

Journal ref: Review of Scientific Instruments 83, 023108 (2012)

Self assembly of microparticles in stable ring structures in an optical trap

Authors: Arijit Haldar, Sambit Bikas Pal, Basudev Roy, S. Dutta Gupta, Ayan Banerjee

Abstract: Micro-particle self assembly under the influence of optical forces produced by higher order optical beams or by projection of a hologram into the trapping volume is well known. In this paper, we report the spontaneous formation of a ring of identical microspheres (each with diameter 1.1 $μ$m) in conventional single beam optical tweezers with a usual TEM$_{00}$ Gaussian beam coupled into a sample c… ▽ More Micro-particle self assembly under the influence of optical forces produced by higher order optical beams or by projection of a hologram into the trapping volume is well known. In this paper, we report the spontaneous formation of a ring of identical microspheres (each with diameter 1.1 $μ$m) in conventional single beam optical tweezers with a usual TEM$_{00}$ Gaussian beam coupled into a sample chamber having standing wave geometry with a cover slip and glass slide. The effects of different experimental parameters on the ring formation are studied extensively. The experimental observations are backed by theoretical simulations based on a plane wave decomposition of the forward and backward propagating Gaussian beams. The ring patterns are shown to be caused due to geomterical aberrations produced by focusing the Gaussian beam using a high numerical aperture microscope objective into stratified media. It is found that the thickness of the stratified media and the standing wave geometry itself play a critical role in formation of stable ring structures. These structures could be used in the study of optical binding, as well as biological interactions between cells in an optical trap. △ Less

Submitted 15 February, 2012; v1 submitted 5 November, 2011; originally announced November 2011.

Comments: 21 pages, 14 figures

Journal ref: Physical Review A 85, 033832 (2012)

Measurement of probe displacement to the thermal resolution limit in photonic force microscopy using a miniature quadrant photodetector

Authors: Sambit Bikas Pal, Arijit Haldar, Basudev Roy, Ayan Banerjee

Abstract: A photonic force microscope comprises of an optically trapped micro-probe and a position detection system to track the motion of the probe. Signal collection for motion detection is often carried out using the backscattered light off the probe - however, this mode has problems of low S/N due to the small back-scattering cross-sections of the micro-probes typically used. The position sensors often… ▽ More A photonic force microscope comprises of an optically trapped micro-probe and a position detection system to track the motion of the probe. Signal collection for motion detection is often carried out using the backscattered light off the probe - however, this mode has problems of low S/N due to the small back-scattering cross-sections of the micro-probes typically used. The position sensors often used in these cases are quadrant photodetectors. To ensure maximum sensitivity of such detectors, it would help if the detector size matched with the detection beam radius after the condenser lens (which for backscattered detection would be the trapping objective itself). To suit this condition, we have used a miniature displacement sensor whose dimensions makes it ideal to work with 1:1 images of micron-sized trapped probes in the back-scattering detection mode. The detector is based on the quadrant photo-IC in the optical pick-up head of a compact disc player. Using this detector, we measured absolute displacements of an optically trapped 1.1 um probe with a resolution of ~10 nm for a bandwidth of 10 Hz at 95% significance without any sample or laser stabilization. We characterized our optical trap for different sized probes by measuring the power spectrum for each probe to 1% accuracy, and found that for 1.1 um diameter probes, the noise in our position measurement matched the thermal resolution limit for averaging times up to 10 ms. We also achieved a linear response range of around 385 nm with crosstalk between axes ~4% for 1.1 um diameter probes. The detector has extremely high bandwidth (few MHz) and low optical power threshold - other factors that can lead to it's widespread use in photonic force microscopy. △ Less

Submitted 5 November, 2011; v1 submitted 18 July, 2011; originally announced July 2011.

Comments: 11 pages, 11 figures

Computational Fluid Dynamics In GARUDA Grid Environment

Authors: Chandra Bhushan Roy, Dr Vikas Kumar

Abstract: GARUDA Grid developed on NKN (National Knowledge Network) network by Centre for Development of Advanced Computing (C-DAC) hubs High Performance Computing (HPC) Clusters which are geographically separated all over India. C-DAC has been associated with development of HPC infrastructure since its establishment in year 1988. The Grid infrastructure provides a secure and efficient way of accessing hete… ▽ More GARUDA Grid developed on NKN (National Knowledge Network) network by Centre for Development of Advanced Computing (C-DAC) hubs High Performance Computing (HPC) Clusters which are geographically separated all over India. C-DAC has been associated with development of HPC infrastructure since its establishment in year 1988. The Grid infrastructure provides a secure and efficient way of accessing heterogeneous resource . Enabling scientific applications on Grid has been researched for some time now. In this regard we have successfully enabled Computational Fluid Dynamics (CFD) application which can help CFD community as a whole in effective manner to carry out computational research which requires huge compuational resource beyond once in house capability. This work is part of current on-going project Grid GARUDA funded by Department of Information Technology. △ Less

Submitted 7 July, 2011; originally announced July 2011.

Comments: Abstract submitted to bluff Body Flow

Lagged Poincaré and auto-correlation analysis of Heart rate variability in diabetes

Authors: S. K. Ghatak, B. Roy

Abstract: The heart rate variability (HRV) in diabetic human subjects, has been analyzed using lagged Poincaré plot, auto-correlation and the detrended fluctuation analysis methods. The parameters $SD1$, and $SD12 (= SD1/SD2)$ for Poincaré plot for diabetic are lower than that for non-diabetic subjects and reverse is case for $SD2$ for all lagged number (m). The slope and the curvature of the plot SD12 vs m… ▽ More The heart rate variability (HRV) in diabetic human subjects, has been analyzed using lagged Poincaré plot, auto-correlation and the detrended fluctuation analysis methods. The parameters $SD1$, and $SD12 (= SD1/SD2)$ for Poincaré plot for diabetic are lower than that for non-diabetic subjects and reverse is case for $SD2$ for all lagged number (m). The slope and the curvature of the plot SD12 vs m is much reduced for diabetic subject. The scatter plot of two successive interbeat intervals points out smaller variability in diabetic heart. The detrended fluctuation exponent has a higher value for diabetic group. The auto-correlation function of the deviation of interbeat interval in diabetic group shows highly correlated pattern when compared to that of normal one. The study suggests that the curvature of $SD12$ and auto-correlation method appear to be better way to assess the alteration of regulatory system on heart dynamics in diabetic condition. △ Less

Submitted 28 May, 2010; originally announced May 2010.

Comments: 15 pages, 6 Figures

Modulation of Autonomous Nervous System activity by gyrosonic stimulation

Authors: S. K. Ghatak, B. Roy, R. Choudhuri, S. Bandopadhaya

Abstract: A novel audio binaural stimulus that generates rotational perceptions of sound movement in brain at a particular predetermined frequency is referred as gyrosonics. The influence of gyrosonics on autonomic nervous system of healthy subjects has been examined by analyzing heart rate variability (HRV) in time- and frequency- domain. The M-lagged Poincare plot shows that the parameters SD1, SD2 and ra… ▽ More A novel audio binaural stimulus that generates rotational perceptions of sound movement in brain at a particular predetermined frequency is referred as gyrosonics. The influence of gyrosonics on autonomic nervous system of healthy subjects has been examined by analyzing heart rate variability (HRV) in time- and frequency- domain. The M-lagged Poincare plot shows that the parameters SD1, SD2 and ratio SD12 (SD1/SD2) increases with lagged number M, and M-dependence is well described by Pade' approximant $χ\frac{1+βM}{1+γM}$ where values of $χ$, $β$ and $ γ$ depend on parameters SD1,SD2 and SD12. The values of these parameters for different M are augmented after gyrosonic stimulation. The slope and magnitude of curvature of SD1 and SD12 vs M plot increase considerably due to stimulation. The DFA analysis exhibits decrease in value of exponent $α$ due to stimulation. This stimulation results slower Heart rate, higher values of the standard deviation SD and the root-mean squared successive differences (RMSSD) in RR-interval. The spectral power of both low (LF) - and high (HF) - frequency go up due to the stimulation. The results suggest an improvement of the sympatho-vagal balance due to this novel audio stimulus. △ Less

Submitted 28 May, 2010; v1 submitted 10 March, 2010; originally announced March 2010.

A large acceptance scintillator detector with wavelength shifting fibre read-out for search of eta-nucleus bound states

Authors: K. Kilian, S. Kliczewski, Da. Kirillov, Di. Kirillov, D. Kolev, M. Kravcikova, T. Kutsarova, M. Lesiak, J. Lieb, H. Machner, A. Magiera, R. Maier, G. Martinska, S. Nedev, N. Piskunov, D. Prasuhn, D. Prottic, J. Ritman, P. von Rossen, B. J. Roy, P. Shukla, I. Sitnik, R. Siudak, R. Tsenov, M. Ulicny , et al. (2 additional authors not shown)

Abstract: A large acceptance scintillator detector with wavelength shifting optical fibre readout has been designed and built to detect the decay particles of $η$-nucleus bound system (the so-called $η$-mesic nuclei), namely, protons and pions. The detector, named as ENSTAR detector, consists of 122 pieces of plastic scintillator of various shapes and sizes, which are arranged in a cylindrical geometry to… ▽ More A large acceptance scintillator detector with wavelength shifting optical fibre readout has been designed and built to detect the decay particles of $η$-nucleus bound system (the so-called $η$-mesic nuclei), namely, protons and pions. The detector, named as ENSTAR detector, consists of 122 pieces of plastic scintillator of various shapes and sizes, which are arranged in a cylindrical geometry to provide particle identification, energy loss and coarse position information for these particles. A solid angle coverage of $\sim$95% of total 4$π$ is obtained in the present design of the detector. Monte Carlo phase space calculations performed to simulate the formation and decay of $η$-mesic nuclei suggest that its decay particles, the protons and pions are emitted with an opening angle of 150$^\circ \pm 20^\circ$, and with energies in the range of 25 to 300 MeV and 225 to 450 MeV respectively. The detailed GEANT simulations show that $\sim$ 80 % of the decay particles (protons and pions) can be detected within ENSTAR. Several test measurements using alpha source, cosmic-ray muons etc. have been carried out to study the response of ENSTAR scintillator pieces. The in-beam tests of fully assembled detector with proton beam of momentum 870 MeV/c from the Cooler synchrotron COSY have been performed. The test results show that the scintillator fiber design chosen for the detector has performed satisfactorily well. The present article describes the detector design, simulation studies, construction details and test results. △ Less

Submitted 16 May, 2007; originally announced May 2007.

Comments: accepted by Nucl. Instr. Methods in Phys. Research A

Journal ref: Nucl.Instrum.Meth.A578:198-206,2007

How high the temperature of a liquid be raised without boiling?

Authors: Mala Das, B. K. Chatterjee, B. Roy, S. C. Roy

Abstract: How high the temperature of a liquid be raised beyond its boiling point without vaporizing (known as the limit of superheat) is an interesting subject of investigation. A new method of finding the limit of superheat of liquids is presented here. The superheated liquids are taken in the form of drops suspended in visco elastic gel. The nucleation is detected acoustically by a sensitive piezo-elec… ▽ More How high the temperature of a liquid be raised beyond its boiling point without vaporizing (known as the limit of superheat) is an interesting subject of investigation. A new method of finding the limit of superheat of liquids is presented here. The superheated liquids are taken in the form of drops suspended in visco elastic gel. The nucleation is detected acoustically by a sensitive piezo-electric transducer, coupled to a multi channel scaler and the nucleation is observed as a funtion of time and with increase of temperature. The limit of superheat measured by the present method supersedes all other measurements and theoretical predictions in reaching closest to the critical temperature and warrants improved theoretical predictions. △ Less

Submitted 28 July, 2000; originally announced July 2000.

Comments: 10 pages, 1 fig. Phys, Rev. E. (2000) in press

Superheated drop neutron spectrometer

Authors: Mala Das, B. K. Chatterjee, B. Roy, S. C. Roy

Abstract: Superheated drops are known to detect neutrons through the nucleation caused by the recoil nuclei produced by the interactions of neutrons with the atoms constituting the superheated liquid molecule. A novel method of finding the neutron energy from the temperature dependence response of SDD has been developed. From the equivalence between the dependence of threshold energy for nucleation on tem… ▽ More Superheated drops are known to detect neutrons through the nucleation caused by the recoil nuclei produced by the interactions of neutrons with the atoms constituting the superheated liquid molecule. A novel method of finding the neutron energy from the temperature dependence response of SDD has been developed. From the equivalence between the dependence of threshold energy for nucleation on temperature of SDD and the dependence of dE/dx of the recoil ions with the energy of the neutron, a new method of finding the neutron energy spectrum of a polychromatic as well as monochromatic neutron source has been developed. △ Less

Submitted 23 May, 2000; originally announced May 2000.

Comments: 4 pages, Latex file

Journal ref: Nucl.Instrum.Meth. A452 (2000) 273-279

Photon sensitivity of superheated drop at room temperature

Authors: B. Roy, Mala Das, S. C. Roy, B. K. Chatterjee

Abstract: It has been reported so far that superheated drop detector made of R-12 at room temperature are sensitive to neutrons yet insensitive to photons. This property makes its use as one of the most useful neutron dosimeter. The photon sensitivity of R12 at room temperature when exposed to 59.54kev photons obtained from radioactive Am has been noted for the first time in our laboratory. This discovery… ▽ More It has been reported so far that superheated drop detector made of R-12 at room temperature are sensitive to neutrons yet insensitive to photons. This property makes its use as one of the most useful neutron dosimeter. The photon sensitivity of R12 at room temperature when exposed to 59.54kev photons obtained from radioactive Am has been noted for the first time in our laboratory. This discovery is important nt only from the point of view of basic science but more important to the users of R12 in neutron dosimetry to take note of this in assessing the neutron dose correctly. △ Less

Submitted 15 May, 2000; originally announced May 2000.

Comments: 3pages, 1 fig. Nuclear Instruments and Method A, 2000, (accepted)

Journal ref: Nucl.Instrum.Meth. A455 (2000) 782-783

Study of nucleating efficiency of superheated droplets by neutrons

Authors: B. Roy, B. K. Chatterjee, Mala Das, S. C. Roy

Abstract: Superheated droplets are proven to be excelent detectors for neutrons and could be used as a neutron dosimeter. To detect accurately the volume of the vapour formed upon nucleation and hence to observe the nucleation quantitatively an air displacement system has been developed. Superheated droplets are proven to be excelent detectors for neutrons and could be used as a neutron dosimeter. To detect accurately the volume of the vapour formed upon nucleation and hence to observe the nucleation quantitatively an air displacement system has been developed. △ Less

Submitted 25 April, 2000; originally announced April 2000.

Comments: 1page, 1 fig

Journal ref: Radiat.Phys.Chem. 51 (1998) 473

Efficiency of neutron detection of superheated drops of Freon-22

Authors: Mala Das, B. Roy, B. K. Chatterjee, S. C. Roy

Abstract: Neutron detection efficiency of superheated drops of Freon22 for neutrons obtained from a 3Ci Am-Be neutron source has been reported in this paper. Neutron detection efficiency of both F-22 and F-12 have been determined from the measured nucleation rate using the volumetric method developed in our lab. The result shows that the neutron detection efficiency of F-22 for the energy spectrum obtaine… ▽ More Neutron detection efficiency of superheated drops of Freon22 for neutrons obtained from a 3Ci Am-Be neutron source has been reported in this paper. Neutron detection efficiency of both F-22 and F-12 have been determined from the measured nucleation rate using the volumetric method developed in our lab. The result shows that the neutron detection efficiency of F-22 for the energy spectrum obtained from Am-Be is almost double, while the life time is 58.6% smaller than that of F-12, for a particular neutron flux of that source. △ Less

Submitted 17 April, 2000; originally announced April 2000.

Comments: 11 pages

Journal ref: Radiation Measurement 30 (1999), 35-39

Superheated drop as a neutron spectrometer

Authors: Mala Das, B. K. Chatterjee, B. Roy, S. C. Roy

Abstract: Superheated drops are known to vaporise when exposed to energetic nuclear radiation since the discovery of bubble chamber. As the degree of superheat increases in a given liquid, less and less energetic neutrons are required to cause nucleation. This property of superheated liquids are being utilised to develope the neutron spectromer. A new principle of neutron spectrometry using Superheated li… ▽ More Superheated drops are known to vaporise when exposed to energetic nuclear radiation since the discovery of bubble chamber. As the degree of superheat increases in a given liquid, less and less energetic neutrons are required to cause nucleation. This property of superheated liquids are being utilised to develope the neutron spectromer. A new principle of neutron spectrometry using Superheated liquid are developed and the developed principle has been tested by Am-Be neutron source. △ Less

Submitted 17 April, 2000; originally announced April 2000.

Comments: 9 pages, 8 figures. accepted in Nucl.Instru.MethA,2000