-
Thermal architecture for a cryogenic super-pressure balloon payload: design and development of the Taurus flight cryostat
Authors:
Simon Tartakovsky,
Alexandre E. Adler,
Jason E. Austermann,
Steven J. Benton,
Rick Bihary,
Malcolm Durking,
Shannon M. Duff,
Jeffrey P. Filippini,
Aurelien A. Fraisse,
Thomas J. L. J. Gascard,
Sho M. Gibbs,
Suren Gourapura,
Jon E. Gudmundsson,
John W. Hartley,
Johannes Hubmayr,
William C. Jones,
Steven Li,
Jared L. May,
Johanna M. Nagy,
Kate Okun,
Ivan L. Padilla,
L. Javier Romualdez,
Michael R. Vissers
Abstract:
We describe the cryogenic system being developed for Taurus: a super-pressure balloon-borne microwave polarimeter scheduled to fly in 2027. The Taurus cryogenic system consists of a 660L liquid helium cryostat which achieves a base temperature of <100mK with the help of a capillary-fed superfluid tank and a closed cycle dilution refrigerator. The main tank is supported with fiberglass flexures and…
▽ More
We describe the cryogenic system being developed for Taurus: a super-pressure balloon-borne microwave polarimeter scheduled to fly in 2027. The Taurus cryogenic system consists of a 660L liquid helium cryostat which achieves a base temperature of <100mK with the help of a capillary-fed superfluid tank and a closed cycle dilution refrigerator. The main tank is supported with fiberglass flexures and is encased in two layers of vapor-cooled shields which allow Taurus to make full use of the extended flight time offered by the super-pressure balloon platform. The Taurus cryostat is projected to hold for over 50 days while weighing under 1000lbs. We present the design, testing, and thermal analysis of the Taurus cryogenic systems.
△ Less
Submitted 22 October, 2024;
originally announced October 2024.
-
SuperBIT Superpressure Flight Instrument Overview and Performance: Near diffraction-limited Astronomical Imaging from the Stratosphere
Authors:
Ajay S. Gill,
Steven J. Benton,
Christopher J. Damaren,
Spencer W. Everett,
Aurelien A. Fraisse,
John W. Hartley,
David Harvey,
Bradley Holder,
Eric M. Huff,
Mathilde Jauzac,
William C. Jones,
David Lagattuta,
Jason S. -Y. Leung,
Lun Li,
Thuy Vy T. Luu,
Richard Massey,
Jacqueline E. McCleary,
Johanna M. Nagy,
C. Barth Netterfield,
Emaad Paracha,
Susan F. Redmond,
Jason D. Rhodes,
Andrew Robertson,
L. Javier Romualdez,
Jürgen Schmoll
, et al. (4 additional authors not shown)
Abstract:
SuperBIT was a 0.5-meter near-ultraviolet to near-infrared wide-field telescope that launched on a NASA superpressure balloon into the stratosphere from New Zealand for a 45-night flight. SuperBIT acquired multi-band images of galaxy clusters to study the properties of dark matter using weak gravitational lensing. We provide an overview of the instrument and its various subsystems. We then present…
▽ More
SuperBIT was a 0.5-meter near-ultraviolet to near-infrared wide-field telescope that launched on a NASA superpressure balloon into the stratosphere from New Zealand for a 45-night flight. SuperBIT acquired multi-band images of galaxy clusters to study the properties of dark matter using weak gravitational lensing. We provide an overview of the instrument and its various subsystems. We then present the instrument performance from the flight, including the telescope and image stabilization system, the optical system, the power system, and the thermal system. SuperBIT successfully met the instrument's technical requirements, achieving a telescope pointing stability of 0.34 +/- 0.10 arcseconds, a focal plane image stability of 0.055 +/- 0.027 arcseconds, and a PSF FWHM of ~ 0.35 arcseconds over 5-minute exposures throughout the 45-night flight. The telescope achieved a near-diffraction limited point-spread function in all three science bands (u, b, and g). SuperBIT served as a pathfinder to the GigaBIT observatory, which will be a 1.34-meter near-ultraviolet to near-infrared balloon-borne telescope.
△ Less
Submitted 3 August, 2024;
originally announced August 2024.
-
Data downloaded via parachute from a NASA super-pressure balloon
Authors:
Ellen L. Sirks,
Richard Massey,
Ajay S. Gill,
Jason Anderson,
Steven J. Benton,
Anthony M. Brown,
Paul Clark,
Joshua English,
Spencer W. Everett,
Aurelien A. Fraisse,
Hugo Franco,
John W. Hartley,
David Harvey,
Bradley Holder,
Andrew Hunter,
Eric M. Huff,
Andrew Hynous,
Mathilde Jauzac,
William C. Jones,
Nikky Joyce,
Duncan Kennedy,
David Lagattuta,
Jason S. -Y. Leung,
Lun Li,
Stephen Lishman
, et al. (18 additional authors not shown)
Abstract:
In April to May 2023, the superBIT telescope was lifted to the Earth's stratosphere by a helium-filled super-pressure balloon, to acquire astronomical imaging from above (99.5% of) the Earth's atmosphere. It was launched from New Zealand then, for 40 days, circumnavigated the globe five times at a latitude 40 to 50 degrees South. Attached to the telescope were four 'DRS' (Data Recovery System) cap…
▽ More
In April to May 2023, the superBIT telescope was lifted to the Earth's stratosphere by a helium-filled super-pressure balloon, to acquire astronomical imaging from above (99.5% of) the Earth's atmosphere. It was launched from New Zealand then, for 40 days, circumnavigated the globe five times at a latitude 40 to 50 degrees South. Attached to the telescope were four 'DRS' (Data Recovery System) capsules containing 5 TB solid state data storage, plus a GNSS receiver, Iridium transmitter, and parachute. Data from the telescope were copied to these, and two were dropped over Argentina. They drifted 61 km horizontally while they descended 32 km, but we predicted their descent vectors within 2.4 km: in this location, the discrepancy appears irreducible below 2 km because of high speed, gusty winds and local topography. The capsules then reported their own locations to within a few metres. We recovered the capsules and successfully retrieved all of superBIT's data - despite the telescope itself being later destroyed on landing.
△ Less
Submitted 14 November, 2023;
originally announced November 2023.
-
Mechanical Ventilator Milano (MVM): A Novel Mechanical Ventilator Designed for Mass Scale Production in Response to the COVID-19 Pandemic
Authors:
C. Galbiati,
A. Abba,
P. Agnes,
P. Amaudruz,
M. Arba,
F. Ardellier-Desages,
C. Badia,
G. Batignani,
G. Bellani,
G. Bianchi,
D. Bishop,
V. Bocci,
W. Bonivento,
B. Bottino,
M. Bouchard,
S. Brice,
G. Buccino,
S. Bussino,
A. Caminata,
A. Capra,
M. Caravati,
M. Carlini,
L. Carrozzi,
J. M. Cela,
B. Celano
, et al. (123 additional authors not shown)
Abstract:
Presented here is the design of the Mechanical Ventilator Milano (MVM), a novel mechanical ventilator designed for rapid mass production in response to the COVID-19 pandemic to address the urgent shortage of intensive therapy ventilators in many countries, and the growing difficulty in procuring these devices through normal supply chains across borders. This ventilator is an electro-mechanical equ…
▽ More
Presented here is the design of the Mechanical Ventilator Milano (MVM), a novel mechanical ventilator designed for rapid mass production in response to the COVID-19 pandemic to address the urgent shortage of intensive therapy ventilators in many countries, and the growing difficulty in procuring these devices through normal supply chains across borders. This ventilator is an electro-mechanical equivalent of the old and reliable Manley Ventilator, and is able to operate in both pressure-controlled and pressure-supported ventilation modes. MVM is optimized for the COVID-19 emergency, thanks to the collaboration with medical doctors in the front line. MVM is designed for large-scale production in a short amount of time and at a limited cost, as it relays on off-the-shelf components, readily available worldwide. Operation of the MVM requires only a source of compressed oxygen (or compressed medical air) and electrical power. Initial tests of a prototype device with a breathing simulator are also presented. Further tests and developments are underway. At this stage the MVM is not yet a certified medical device but certification is in progress.
△ Less
Submitted 10 April, 2020; v1 submitted 23 March, 2020;
originally announced March 2020.
-
280 GHz Focal Plane Unit Design and Characterization for the SPIDER-2 Suborbital Polarimeter
Authors:
A. S. Bergman,
P. A. R. Ade,
S. Akers,
M. Amiri,
J. A. Austermann,
J. A. Beall,
D. T. Becker,
S. J. Benton,
J. J. Bock,
J. R. Bond,
S. A. Bryan,
H. C. Chiang,
C. R. Contaldi,
R. S Domagalski,
O. Doré,
S. M. Duff,
A. J. Duivenvoorden,
H. K. Eriksen,
M. Farhang,
J. P. Filippini,
L. M. Fissel,
A. A. Fraisse,
K. Freese,
M. Galloway,
A. E. Gambrel
, et al. (54 additional authors not shown)
Abstract:
We describe the construction and characterization of the 280 GHz bolometric focal plane units (FPUs) to be deployed on the second flight of the balloon-borne SPIDER instrument. These FPUs are vital to SPIDER's primary science goal of detecting or placing an upper limit on the amplitude of the primordial gravitational wave signature in the cosmic microwave background (CMB) by constraining the B-mod…
▽ More
We describe the construction and characterization of the 280 GHz bolometric focal plane units (FPUs) to be deployed on the second flight of the balloon-borne SPIDER instrument. These FPUs are vital to SPIDER's primary science goal of detecting or placing an upper limit on the amplitude of the primordial gravitational wave signature in the cosmic microwave background (CMB) by constraining the B-mode contamination in the CMB from Galactic dust emission. Each 280 GHz focal plane contains a 16 x 16 grid of corrugated silicon feedhorns coupled to an array of aluminum-manganese transition-edge sensor (TES) bolometers fabricated on 150 mm diameter substrates. In total, the three 280 GHz FPUs contain 1,530 polarization sensitive bolometers (765 spatial pixels) optimized for the low loading environment in flight and read out by time-division SQUID multiplexing. In this paper we describe the mechanical, thermal, and magnetic shielding architecture of the focal planes and present cryogenic measurements which characterize yield and the uniformity of several bolometer parameters. The assembled FPUs have high yields, with one array as high as 95% including defects from wiring and readout. We demonstrate high uniformity in device parameters, finding the median saturation power for each TES array to be ~3 pW at 300 mK with a less than 6% variation across each array at one standard deviation. These focal planes will be deployed alongside the 95 and 150 GHz telescopes in the SPIDER-2 instrument, slated to fly from McMurdo Station in Antarctica in December 2018.
△ Less
Submitted 22 November, 2017; v1 submitted 11 November, 2017;
originally announced November 2017.
