Showing 1–12 of 12 results for author: Romagnoli, M

Graphene phase modulators operating in the transparency regime

Authors: H. F. Y. Watson, A. Ruocco, M. Tiberi, J. E. Muench, O. Balci, S. M. Shinde, S. Mignuzzi, M. Pantouvaki, D. Van Thourhout, R. Sordan, A. Tomadin, M. Romagnoli, A. C. Ferrari

Abstract: Next-generation data networks need to support Tb/s rates. In-phase and quadrature (IQ) modulation combine phase and intensity information to increase the density of encoded data, reduce overall power consumption by minimising the number of channels, and increase noise tolerance. To reduce errors when decoding the received signal, intersymbol interference must be minimised. This is achieved with pu… ▽ More Next-generation data networks need to support Tb/s rates. In-phase and quadrature (IQ) modulation combine phase and intensity information to increase the density of encoded data, reduce overall power consumption by minimising the number of channels, and increase noise tolerance. To reduce errors when decoding the received signal, intersymbol interference must be minimised. This is achieved with pure phase modulation, where the phase of the optical signal is controlled without changing its intensity. Phase modulators are characterised by the voltage required to achieve a $π$ phase shift V$_π$, the device length L, and their product V$_π$L. To reduce power consumption, IQ modulators are needed with$<$1V drive voltages and compact (sub-cm) dimensions, which translate in V$_π$L$<$1Vcm. Si and LiNbO$_3$ (LN) IQ modulators do not currently meet these requirements, because V$_π$L$>$1Vcm. Here, we report a double single-layer graphene (SLG) Mach-Zehnder modulator (MZM) with pure phase modulation in the transparent regime, where optical losses are minimised and remain constant with increasing voltage. Our device has $V_πL\sim$0.3Vcm, matching state-of-the-art SLG-based MZMs and plasmonic LN MZMs, but with pure phase modulation and low insertion loss ($\sim$5dB), essential for IQ modulation. Our $V_πL$ is$\sim$5 times lower than the lowest thin-film LN MZMs, and$\sim$3 times lower than the lowest Si MZMs. This enables devices with complementary metal-oxide semiconductor compatible V$_π$L ($<$1Vcm) and smaller footprint than LN or Si MZMs, improving circuit density and reducing power consumption by one order of magnitude. △ Less

Submitted 25 December, 2023; originally announced January 2024.

Journal ref: ACS Nano 18, 30269 (2024)

Wafer-scale integration of graphene-based photonic devices

Authors: Marco A. Giambra, Vaidotas Mišeikis, Sergio Pezzini, Simone Marconi, Alberto Montanaro, Filippo Fabbri, Vito Sorianello, Andrea C. Ferrari, Camilla Coletti, Marco Romagnoli

Abstract: Graphene and related materials can lead to disruptive advances in next generation photonics and optoelectronics. The challenge is to devise growth, transfer and fabrication protocols providing high (>5,000 cm2 V-1 s-1) mobility devices with reliable performance at the wafer scale. Here, we present a flow for the integration of graphene in photonics circuits. This relies on chemical vapour depositi… ▽ More Graphene and related materials can lead to disruptive advances in next generation photonics and optoelectronics. The challenge is to devise growth, transfer and fabrication protocols providing high (>5,000 cm2 V-1 s-1) mobility devices with reliable performance at the wafer scale. Here, we present a flow for the integration of graphene in photonics circuits. This relies on chemical vapour deposition (CVD) of single layer graphene (SLG) matrices comprising up to ~12000 individual single crystals (SCs), grown to match the geometrical configuration of the devices in the photonic circuit. This is followed by a transfer approach which guarantees coverage over ~80% of the device area, and integrity for up to 150 mm wafers, with room temperature mobility ~5000 cm2 V-1 s-1. We use this process flow to demonstrate double SLG electro-absorption modulators with modulation efficiency ~0.25, 0.45, 0.75, 1 dB V-1 for device lengths ~30, 60, 90, 120 μm. The data rate is up to 20 Gbps. Encapsulation with single-layer hBN is used to protected SLG during plasma-enhanced CVD of Si3N4, ensuring reproducible device performance. Our full process flow (from growth to device fabrication) enables the commercial implementation of graphene-based photonic devices. △ Less

Submitted 9 February, 2021; v1 submitted 18 November, 2020; originally announced December 2020.

Comments: 30 pages, 9 Figures

Ultrafast, Zero-Bias, Graphene Photodetectors with Polymeric Gate Dielectric on Passive Photonic Waveguides

Authors: Vaidotas Mišeikis, Simone Marconi, Marco A. Giambra, Alberto Montanaro, Leonardo Martini, Filippo Fabbri, Sergio Pezzini, Giulia Piccinini, Stiven Forti, Bernat Terrés, Ilya Goykhman, Louiza Hamidouche, Pierre Legagneux, Vito Sorianello, Andrea C. Ferrari, Frank H. L. Koppens, Marco Romagnoli, Camilla Coletti

Abstract: We report compact, scalable, high-performance, waveguide integrated graphene-based photodetectors (GPDs) for telecom and datacom applications, not affected by dark current. To exploit the photothermoelectric (PTE) effect, our devices rely on a graphene-polymer-graphene stack with static top split gates. The polymeric dielectric, poly(vinyl alcohol) (PVA), allows us to preserve graphene quality and… ▽ More We report compact, scalable, high-performance, waveguide integrated graphene-based photodetectors (GPDs) for telecom and datacom applications, not affected by dark current. To exploit the photothermoelectric (PTE) effect, our devices rely on a graphene-polymer-graphene stack with static top split gates. The polymeric dielectric, poly(vinyl alcohol) (PVA), allows us to preserve graphene quality and to generate a controllable p-n junction. Both graphene layers are fabricated using aligned single-crystal graphene arrays grown by chemical vapor deposition. The use of PVA yields a low charge inhomogeneity 8 x 10$^{10}$ $cm^{-2}$ at the charge neutrality point, and a large Seebeck coefficient 140 $μ$V K$^{-1}$, enhancing the PTE effect. Our devices are the fastest GPDs operating with zero dark current, showing a flat frequency response up to 67 GHz without roll-off. This performance is achieved on a passive, low-cost, photonic platform, and does not rely on nanoscale plasmonic structures. This, combined with scalability and ease of integration, makes our GPDs a promising building block for next-generation optical communication devices. △ Less

Submitted 11 September, 2020; originally announced September 2020.

Comments: 15 pages, 11 figures. Published under ACS AuthorChoice license

Journal ref: ACS Nano 14, 11190 (2020)

High-responsivity graphene photodetectors integrated on silicon microring resonators

Authors: Simone Schuler, Jakob E. Muench, Alfonso Ruocco, Osman Balci, Dries van Thourhout, Vito Sorianello, Marco Romagnoli, Kenji Watanabe, Takashi Taniguchi, Ilya Goykhman, Andrea C. Ferrari, Thomas Mueller

Abstract: Graphene integrated photonics provides several advantages over conventional Si photonics. Single layer graphene (SLG) enables fast, broadband, and energy-efficient electro-optic modulators, optical switches and photodetectors (GPDs), and is compatible with any optical waveguide. The last major barrier to SLG-based optical receivers lies in the low responsivity - electrical output per optical input… ▽ More Graphene integrated photonics provides several advantages over conventional Si photonics. Single layer graphene (SLG) enables fast, broadband, and energy-efficient electro-optic modulators, optical switches and photodetectors (GPDs), and is compatible with any optical waveguide. The last major barrier to SLG-based optical receivers lies in the low responsivity - electrical output per optical input - of GPDs compared to conventional PDs. Here we overcome this shortfall by integrating a photo-thermoelectric GPD with a Si microring resonator. Under critical coupling, we achieve $>$90% light absorption in a $\sim$6 $μ$m SLG channel along the Si waveguide. Exploiting the cavity-enhanced light-matter interaction, causing carriers in SLG to reach $\sim$400 K for an input power of $\sim$0.6 mW, we get a voltage responsivity $\sim$90 V/W, demonstrating the feasibility of our approach. Our device is capable of detecting data rates up to 20 Gbit/s, with a receiver sensitivity enabling it to operate at a 10$^{-9}$ bit-error rate, on par with mature semiconductor technology. The natural generation of a voltage rather than a current, removes the need for transimpedance amplification, with a reduction of the energy-per-bit cost and foot-print, when compared to a traditional semiconductor-based receiver. △ Less

Submitted 6 July, 2020; originally announced July 2020.

Comments: 11 pages, 5 figures

A liquid nitrogen cooled superconducting transition edge sensor with ultra-high responsivity and GHz operation speeds

Authors: Paul Seifert, Jose Ramon Duran Retamal, Rafael Luque Merino, Hanan Herzig Sheinfux, John N. Moore, Mohammed Ali Aamir, Takashi Taniguchi, Kenji Wantanabe, Kazuo Kadowaki, Massimo Artiglia, Marco Romagnoli, Dmitri K. Efetov

Abstract: Photodetectors based on nano-structured superconducting thin films are currently some of the most sensitive quantum sensors and are key enabling technologies in such broad areas as quantum information, quantum computation and radio-astronomy. However, their broader use is held back by the low operation temperatures which require expensive cryostats. Here, we demonstrate a nitrogen cooled supercond… ▽ More Photodetectors based on nano-structured superconducting thin films are currently some of the most sensitive quantum sensors and are key enabling technologies in such broad areas as quantum information, quantum computation and radio-astronomy. However, their broader use is held back by the low operation temperatures which require expensive cryostats. Here, we demonstrate a nitrogen cooled superconducting transition edge sensor, which shows orders of magnitude improved performance characteristics of any superconducting detector operated above 77K, with a responsivity of 9.61x10^4 V/W, noise equivalent power of 15.9 fW/Hz-1/2 and operation speeds up to GHz frequencies. It is based on van der Waals heterostructures of the high temperature superconductor Bi2Sr2CaCu2O8, which are shaped into nano-wires with ultra-small form factor. To highlight the versatility of the detector we demonstrate its fabrication and operation on a telecom grade SiN waveguide chip. Our detector significantly relaxes the demands of practical applications of superconducting detectors and displays its huge potential for photonics based quantum applications. △ Less

Submitted 4 June, 2020; originally announced June 2020.

Photo Thermal Effect Graphene Detector Featuring 105 Gbit s-1 NRZ and 120 Gbit s-1 PAM4 Direct Detection

Authors: S. Marconi, M. A. Giambra, A. Montanaro, V. Mišeikis, S. Soresi, S. Tirelli, P. Galli, F. Buchali, W. Templ, C. Coletti, V. Sorianello, M. Romagnoli

Abstract: The challenge of next generation datacom and telecom communication is to increase the available bandwidth while reducing the size, cost and power consumption of photonic integrated circuits. Silicon (Si) photonics has emerged as a viable solution to reach these objectives. Graphene, a single-atom thick layer of carbon5, has been recently proposed to be integrated with Si photonics because of its v… ▽ More The challenge of next generation datacom and telecom communication is to increase the available bandwidth while reducing the size, cost and power consumption of photonic integrated circuits. Silicon (Si) photonics has emerged as a viable solution to reach these objectives. Graphene, a single-atom thick layer of carbon5, has been recently proposed to be integrated with Si photonics because of its very high mobility, fast carrier dynamics and ultra-broadband optical properties. Here, we focus on graphene photodetectors for high speed datacom and telecom applications. High speed graphene photodetectors have been demonstrated so far, however the most are based on the photo-bolometric (PB) or photo-conductive (PC) effect. These devices are characterized by large dark current, in the order of milli-Amperes , which is an impairment in photo-receivers design, Photo-thermo-electric (PTE) effect has been identified as an alternative phenomenon for light detection. The main advantages of PTE-based photodetectors are the optical power to voltage conversion, zero-bias operation and ultra-fast response. Graphene PTE-based photodetectors have been reported in literature, however high-speed optical signal detection has not been shown. Here, we report on an optimized graphene PTE-based photodetector with flat frequency response up to 65 GHz. Thanks to the optimized design we demonstrate a system test leading to direct detection of 105 Gbit s-1 non-return to zero (NRZ) and 120 Gbit s-1 4-level pulse amplitude modulation (PAM) optical signals △ Less

Submitted 2 June, 2020; originally announced June 2020.

High-speed double layer graphene electro-absorption modulator on SOI waveguide

Authors: Marco A. Giambra, Vito Sorianello, Vaidotas Miseikis, Simone Marconi, Alberto Montanaro, Paola Galli, Sergio Pezzini, Camilla Coletti, Marco Romagnoli

Abstract: We report on a C-band double layer graphene electro-absorption modulator on a passive SOI platform showing 29GHz 3dB-bandwith and NRZ eye-diagrams extinction ratios ranging from 1.7 dB at 10 Gb/s to 1.3 dB at 50 Gb/s. Such high modulation speed is achieved thanks to the quality of the CVD pre-patterned single crystal growth and transfer on wafer method that permitted the integration of high-qualit… ▽ More We report on a C-band double layer graphene electro-absorption modulator on a passive SOI platform showing 29GHz 3dB-bandwith and NRZ eye-diagrams extinction ratios ranging from 1.7 dB at 10 Gb/s to 1.3 dB at 50 Gb/s. Such high modulation speed is achieved thanks to the quality of the CVD pre-patterned single crystal growth and transfer on wafer method that permitted the integration of high-quality scalable graphene and low contact resistance. By demonstrating this high-speed CVD graphene EAM modulator integrated on Si photonics and the scalable approach, we are confident that graphene can satisfy the main requirements to be a competitive technology for photonics. △ Less

Submitted 28 February, 2020; originally announced March 2020.

Optical Pre-Emphasis by Cascaded Graphene Electro Absorption Modulators

Authors: V. Sorianello, G. Contestabile, M. Midrio, M. Pantouvaki, I. Asselbergs, J. Van Campenhout, C. Huyghebaerts, M. Romagnoli

Abstract: A simple optical circuit made by a cascade of two graphene-on-silicon electro absorption modulators (EAMs) of different length is used for the optical pre-emphasis of 10 Gb/s non-return-to-zero (NRZ) signals by delay-inverse-weight compensation. Transmission up to 100 km on single mode fiber (SMF) without dispersion compensation is reported, showing also the large performance advantage (6 dB in ba… ▽ More A simple optical circuit made by a cascade of two graphene-on-silicon electro absorption modulators (EAMs) of different length is used for the optical pre-emphasis of 10 Gb/s non-return-to-zero (NRZ) signals by delay-inverse-weight compensation. Transmission up to 100 km on single mode fiber (SMF) without dispersion compensation is reported, showing also the large performance advantage (6 dB in back-to back and around 5 dB in transmission) in respect of the conventional single EAM transmitter configuration. △ Less

Submitted 28 February, 2020; originally announced March 2020.

Graphene on Silicon Modulators

Authors: V. Sorianello, G. Contestabile, M. Romagnoli

Abstract: Graphene is a 2D material with appealing electronic and optoelectronic properties. It is a zero-bandgap material with valence and conduction bands meeting in a single point (Dirac point) in the momentum space. Its conductivity can be changed by shifting the Fermi level energy via an external electric field. This important property determines broadband and tunable absorption at optical frequencies.… ▽ More Graphene is a 2D material with appealing electronic and optoelectronic properties. It is a zero-bandgap material with valence and conduction bands meeting in a single point (Dirac point) in the momentum space. Its conductivity can be changed by shifting the Fermi level energy via an external electric field. This important property determines broadband and tunable absorption at optical frequencies. Moreover, its conductivity is a complex quantity, i.e. Graphene exhibits both electro-absorption and electro-refraction tunability, and this is an intriguing property for photonic applications. For example, it can be combined as an active material for silicon waveguides to realize efficient detectors, switches and modulators. In this paper, we review our results in the field, focusing on graphene-based optical modulators integrated on Silicon photonic platforms. Results obtained in the fabrication of single- and double-layer capacitive modulators are reported showing intensity and phase modulation, resilience of the generated signals to chromatic dispersion because of proper signal chirp and operation up to 50 Gb/s. △ Less

Submitted 5 March, 2020; originally announced March 2020.

Graphene-Based Integrated Photonics For Next-Generation Datacom And Telecom

Authors: M. Romagnoli, V. Sorianello, M. Midrio, F. H. L. Koppens, C. Huyghebaert, D. Neumaier, P. Galli, W. Templ, A. D'Errico, A. C. Ferrari

Abstract: Graphene is an ideal material for optoelectronic applications. Its photonic properties give several advantages and complementarities over Si photonics. For example, graphene enables both electro-absorption and electro-refraction modulation with an electro-optical index change exceeding 10$^{-3}$. It can be used for optical add-drop multiplexing with voltage control, eliminating the current dissipa… ▽ More Graphene is an ideal material for optoelectronic applications. Its photonic properties give several advantages and complementarities over Si photonics. For example, graphene enables both electro-absorption and electro-refraction modulation with an electro-optical index change exceeding 10$^{-3}$. It can be used for optical add-drop multiplexing with voltage control, eliminating the current dissipation used for the thermal detuning of microresonators, and for thermoelectric-based ultrafast optical detectors that generate a voltage without transimpedance amplifiers. Here, we present our vision for grapheme-based integrated photonics. We review graphene-based transceivers and compare them with existing technologies. Strategies for improving power consumption, manufacturability and wafer-scale integration are addressed. We outline a roadmap of the technological requirements to meet the demands of the datacom and telecom markets. We show that graphene based integrated photonics could enable ultrahigh spatial bandwidth density , low power consumption for board connectivity and connectivity between data centres, access networks and metropolitan, core, regional and long-haul optical communications. △ Less

Submitted 2 June, 2019; originally announced June 2019.

Journal ref: Nature Reviews Materials 3, 392(2018)

Waveguide-integrated, plasmonic enhanced graphene photodetectors

Authors: J. E. Muench, A. Ruocco, M. A. Giambra, V. Miseikis, D. Zhang, J. Wang, H. F. Y. Watson, G. C. Park, S. Akhavan, V. Sorianello, M. Midrio, A. Tomadin, C. Coletti, M. Romagnoli, A. C. Ferrari, I. Goykhman

Abstract: We present a micrometer scale, on-chip integrated, plasmonic enhanced graphene photodetector (GPD) for telecom wavelengths operating at zero dark current. The GPD is designed and optimized to directly generate a photovoltage and has an external responsivity~12.2V/W with a 3dB bandwidth~42GHz. We utilize Au split-gates with a$\sim$100nm gap to electrostatically create a p-n-junction and simultaneou… ▽ More We present a micrometer scale, on-chip integrated, plasmonic enhanced graphene photodetector (GPD) for telecom wavelengths operating at zero dark current. The GPD is designed and optimized to directly generate a photovoltage and has an external responsivity~12.2V/W with a 3dB bandwidth~42GHz. We utilize Au split-gates with a$\sim$100nm gap to electrostatically create a p-n-junction and simultaneously guide a surface plasmon polariton gap-mode. This increases light-graphene interaction and optical absorption and results in an increased electronic temperature and steeper temperature gradient across the GPD channel. This paves the way to compact, on-chip integrated, power-efficient graphene based photodetectors for receivers in tele and datacom modules △ Less

Submitted 11 May, 2019; originally announced May 2019.

Journal ref: Nano Lett 19, 7632 (2019)

Graphene Based Optical Phase Modulation

Authors: Michele Midrio, Paola Galli, Marco Romagnoli, Lionel C. Kimerling, Jurgen Michel

Abstract: In this paper we report phase modulation obtained by inducing a capacitive charge on graphene layers embedded in the core of a waveguide. There is a biasing regime in which graphene absorption is negligible but large index variations can be achieved with a voltage-length product as small as $V_π\,L_π\simeq 0.04 $\,V\,cm . Examples of phase induced changes are computed for straight waveguides and f… ▽ More In this paper we report phase modulation obtained by inducing a capacitive charge on graphene layers embedded in the core of a waveguide. There is a biasing regime in which graphene absorption is negligible but large index variations can be achieved with a voltage-length product as small as $V_π\,L_π\simeq 0.04 $\,V\,cm . Examples of phase induced changes are computed for straight waveguides and for microring resonators showing the possibility to implement several optoelectronic functionalities as modulators, tunable filters, and switches. △ Less

Submitted 11 June, 2013; v1 submitted 24 April, 2013; originally announced April 2013.

Comments: Review needed due to an error in an expression