-
Noise-induced nonreciprocal topological dissipative solitons in directionally coupled chains and lattices
Authors:
David Pinto-Ramos,
Karin Alfaro-Bittner,
René G. Rojas,
Marcel G. Clerc
Abstract:
Nonreciprocal coupling can alter the transport properties of material media, producing striking phenomena such as unidirectional amplification of waves, boundary modes, or self-assembled pattern formation. It is responsible for nonlinear convective instabilities in nonlinear systems that drive topological dissipative solitons in a single direction, producing a lossless information transmission. Co…
▽ More
Nonreciprocal coupling can alter the transport properties of material media, producing striking phenomena such as unidirectional amplification of waves, boundary modes, or self-assembled pattern formation. It is responsible for nonlinear convective instabilities in nonlinear systems that drive topological dissipative solitons in a single direction, producing a lossless information transmission. Considering fluctuations, which are intrinsic to every macroscopic dynamical system, noise-sustained structures emerge permanently in time. Here, we study arrays of nonreciprocally coupled bistable systems exhibiting noise-sustained topological phase wall (or soliton) dynamics. The bifurcations between different steady states are analytically addressed, and the properties of the noise-sustained states are unveiled as a function of the reciprocal and nonreciprocal coupling parameters. Furthermore, we study critical points where the structures' characteristic size diverges with different power law exponents. Our numerical results agree with the theoretical findings.
△ Less
Submitted 22 November, 2024;
originally announced November 2024.
-
New bounds for heat transport in internally heated convection at infinite Prandtl number
Authors:
Ali Arslan,
Ruben E. Rojas
Abstract:
We prove new bounds on the heat flux out of the bottom boundary, $\mathcal{F}_B$, for a fluid at infinite Prandtl number, heated internally between isothermal parallel plates under two kinematic boundary conditions. In uniform internally heated convection, the supply of heat equally leaves the domain by conduction when there is no flow. When the heating, quantified by the Rayleigh number, $R$, is…
▽ More
We prove new bounds on the heat flux out of the bottom boundary, $\mathcal{F}_B$, for a fluid at infinite Prandtl number, heated internally between isothermal parallel plates under two kinematic boundary conditions. In uniform internally heated convection, the supply of heat equally leaves the domain by conduction when there is no flow. When the heating, quantified by the Rayleigh number, $R$, is sufficiently large, turbulent convection ensues and decreases the heat leaving the domain through the bottom boundary. In the case of no-slip boundary conditions, with the background field method, we prove that $\mathcal{F}_B \gtrsim R^{-2/3} - R^{-1/2}\log{(1-R^{-2/3})}$ up to a positive constant independent of the Rayleigh and Prandtl numbers. Whereas between stress-free boundaries we prove, $\mathcal{F}_B \gtrsim R^{-40/29} - R^{-35/29}\log{(1-R^{-40/29})}$. We perform a numerical study of the system in two dimensions up to a Rayleigh number of $5\times10^9$ with the spectral solver Dedalus. The numerical investigations indicate that $\mathcal{F}_B \sim R^{-0.092} $ and $\mathcal{F}_B \sim R^{-0.12}$ for the two kinematic boundary conditions respectively. The gap between the bounds and simulations, and our constructions in the proofs highlight that there still exists room for optimisation of bounds for $\mathcal{F}_B$.
△ Less
Submitted 21 March, 2024;
originally announced March 2024.
-
How Charles Babbage invented the Computer
Authors:
Raul Rojas
Abstract:
This paper provides an overview of the successive stages in the development of Charles Babbage's Analytical Engine, based on the blueprints held in the Babbage Papers Archive, accessible online through the Science Museum in London. The first person to decipher these schematics was Allan Bromley, whose contributions in the 1980s and 1990s significantly advanced our understanding of Babbage's pionee…
▽ More
This paper provides an overview of the successive stages in the development of Charles Babbage's Analytical Engine, based on the blueprints held in the Babbage Papers Archive, accessible online through the Science Museum in London. The first person to decipher these schematics was Allan Bromley, whose contributions in the 1980s and 1990s significantly advanced our understanding of Babbage's pioneering work. The Science Museum's digitization of the Babbage Papers enables a chronological exploration of the evolution of Babbage's machines. The focus is on the Analytical Engine, shedding light on its lesser known but crucial transitional phases.
△ Less
Submitted 7 November, 2023;
originally announced November 2023.
-
Reducing cartel recruitment and upholding the rule of law is the only way to reduce violence in Mexico
Authors:
Raul Rojas
Abstract:
This paper is a comment to a recent paper which appeared in Science, presenting a mathematical model of the size distribution, in terms of manpower, of the drugs cartels in Mexico. I show that the model is undetermined and that the main conclusion does not hold.
This paper is a comment to a recent paper which appeared in Science, presenting a mathematical model of the size distribution, in terms of manpower, of the drugs cartels in Mexico. I show that the model is undetermined and that the main conclusion does not hold.
△ Less
Submitted 2 October, 2023;
originally announced October 2023.
-
Measurement of the intrinsic hadronic contamination in the NA64$-e$ high-purity $e^+/e^-$ beam at CERN
Authors:
Yu. M. Andreev,
D. Banerjee,
B. Banto Oberhauser,
J. Bernhard,
P. Bisio,
M. Bondi,
A. Celentano,
N. Charitonidis,
A. G. Chumakov,
D. Cooke,
P. Crivelli,
E. Depero,
A. V. Dermenev,
S. V. Donskov,
R. R. Dusaev,
T. Enik,
V. N. Frolov,
A. Gardikiotis,
S. G. Gerassimov,
S. N. Gninenko,
M. H"osgen,
M. Jeckel,
V. A. Kachanov,
Y. Kambar,
A. E. Karneyeu
, et al. (43 additional authors not shown)
Abstract:
In this study, we present the measurement of the intrinsic hadronic contamination at the CERN SPS H4 beamline configured to transport electrons and positrons at 100 GeV/c momentum. The analysis was performed using data collected by the NA64-$e$ experiment in 2022. Our study is based on calorimetric measurements, exploiting the different interaction mechanisms of electrons and hadrons in the NA64-E…
▽ More
In this study, we present the measurement of the intrinsic hadronic contamination at the CERN SPS H4 beamline configured to transport electrons and positrons at 100 GeV/c momentum. The analysis was performed using data collected by the NA64-$e$ experiment in 2022. Our study is based on calorimetric measurements, exploiting the different interaction mechanisms of electrons and hadrons in the NA64-ECAL and NA64-HCAL detectors. We determined the intrinsic hadronic contamination by comparing the results obtained using the nominal electron/positron beamline configuration with those obtained in a dedicated setup, in which only hadrons impinged on the detector. The significant differences in the experimental signatures of electrons and hadrons motivated our approach, resulting in a small and well-controlled systematic uncertainty for the measurement. Our study allowed us to precisely determine the intrinsic hadronic contamination, which represents a crucial parameter for the NA64 experiment in which the hadron contaminants may result in non-trivial backgrounds. Moreover, we performed dedicated Monte Carlo simulations for the hadron production induced by the primary T2 target. We found a good agreement between measurements and simulation results, confirming the validity of the applied methodology and our evaluation of the intrinsic hadronic contamination.
△ Less
Submitted 11 October, 2023; v1 submitted 30 May, 2023;
originally announced May 2023.
-
Hard-Sphere Jamming through the Lens of Linear Optimization
Authors:
Claudia Artiaco,
Rafael Díaz Hernández Rojas,
Giorgio Parisi,
Federico Ricci-Tersenghi
Abstract:
The jamming transition is ubiquitous. It is present in granular matter, colloids, glasses, and many other systems. Yet, it defines a critical point whose properties still need to be fully understood. A major breakthrough came about when the replica formalism was extended to build a mean-field theory that provides an exact description of the jamming transition of spherical particles in the infinite…
▽ More
The jamming transition is ubiquitous. It is present in granular matter, colloids, glasses, and many other systems. Yet, it defines a critical point whose properties still need to be fully understood. A major breakthrough came about when the replica formalism was extended to build a mean-field theory that provides an exact description of the jamming transition of spherical particles in the infinite-dimensional limit. While such theory explains the jamming critical behavior of both soft and hard spheres, investigating the transition in finite-dimensional systems poses very difficult and different problems, in particular from the numerical point of view. Soft particles are modeled by continuous potentials; thus, their jamming point can be reached through efficient energy minimization algorithms. In contrast, the latter methods are inapplicable to hard-sphere (HS) systems since the interaction energy among the particles is always zero by construction. To overcome these difficulties, here we recast the jamming of hard spheres as a constrained optimization problem and introduce the CALiPPSO algorithm, capable of readily producing jammed HS packings without including any effective potential. This algorithm brings a HS configuration of arbitrary dimensions to its jamming point by solving a chain of linear optimization problems. We show that there is a strict correspondence between the force balance conditions of jammed packings and the properties of the optimal solutions of CALiPPSO, whence we prove analytically that our packings are always isostatic and in mechanical equilibrium. Furthermore, using extensive numerical simulations, we show that our algorithm is able to probe the complex structure of the free-energy landscape, finding qualitative agreement with mean-field predictions. We also characterize the algorithmic complexity of CALiPPSO and provide an open-source implementation of it.
△ Less
Submitted 8 September, 2023; v1 submitted 10 March, 2022;
originally announced March 2022.
-
Hunting down the X17 boson at the CERN SPS
Authors:
E. Depero,
Yu. M. Andreev,
D. Banerjee,
J. Bernhard,
V. Burtsev,
A . Chumakov,
D. Cooke,
A. Dermenev,
S. Donskov,
R. Dusaev,
T. Enik,
N. Charitonidis,
A. Feshchenko,
V. Frolov,
A. Gardikiotis,
S. Gerassimov,
S. Girod,
S. Gninenko,
M. Hosgen,
V. Kachanov,
A. Karneyeu,
G. Kekelidze,
B. Ketzer,
D. Kirpichnikov,
M. Kirsanov
, et al. (31 additional authors not shown)
Abstract:
Recently, the ATOMKI experiment has reported new evidence for the excess of $e^+ e^-$ events with a mass $\sim$17 MeV in the nuclear transitions of $^4$He, that they previously observed in measurements with $^8$Be. These observations could be explained by the existence of a new vector $X17$ boson. So far, the search for the decay $X17 \rightarrow e^+ e^-$ with the NA64 experiment at the CERN SPS g…
▽ More
Recently, the ATOMKI experiment has reported new evidence for the excess of $e^+ e^-$ events with a mass $\sim$17 MeV in the nuclear transitions of $^4$He, that they previously observed in measurements with $^8$Be. These observations could be explained by the existence of a new vector $X17$ boson. So far, the search for the decay $X17 \rightarrow e^+ e^-$ with the NA64 experiment at the CERN SPS gave negative results. Here, we present a new technique that could be implemented in NA64 aiming to improve the sensitivity and to cover the remaining $X17$ parameter space. If a signal-like event is detected, an unambiguous observation is achieved by reconstructing the invariant mass of the $X17$ decay with the proposed method. To reach this goal an optimization of the $X17$ production target, as well as an efficient and accurate reconstruction of two close decay tracks, is required. A dedicated analysis of the available experimental data making use of the trackers information is presented. This method provides independent confirmation of the NA64 published results [Phys. Rev. D101, 071101 (2020)], validating the tracking procedure. The detailed Monte Carlo study of the proposed setup and the background estimate shows that the goal of the proposed search is feasible.
△ Less
Submitted 8 September, 2020; v1 submitted 6 September, 2020;
originally announced September 2020.
-
Development and Experimental Validation of a Viscosity Meter for Newtonian and Non-Newtonian Fluids
Authors:
Raúl O. Rojas,
Juan C. Quijano,
Claudia P. Tavera Ruiz,
Alex F. Estupiñán L
Abstract:
The study of viscosity, in the area of fluid physics at a university level, is of great importance because of the various applications that are presented in the different fields of engineering. In this work an experimental method of implementation and validation is exposed, to be able to calculate the viscosity of some newtonian and non-newtonian fluids, in which the method of a sphere that descen…
▽ More
The study of viscosity, in the area of fluid physics at a university level, is of great importance because of the various applications that are presented in the different fields of engineering. In this work an experimental method of implementation and validation is exposed, to be able to calculate the viscosity of some newtonian and non-newtonian fluids, in which the method of a sphere that descends through a fluid has been used, making Using a viscometer of our own construction, with the help of the CassyLab sensor and software of Leybold Didactics, we show the results obtained by our measuring instrument, which is intended to highlight the versatility and precision of the measuring instrument prepared by us, in addition In this work the authors want to motivate the physics laboratory teachers; to explore the use of these tools that allow you to check the topics seen in the theoretical classes. Finally, we present the hardworking results of the measurement of viscosity for different fluids, both newtonian and non-newtonian, for the latter we show the viscosity behavior as a function of temperature.
△ Less
Submitted 14 August, 2020; v1 submitted 10 August, 2020;
originally announced August 2020.
-
Broadband loop gap resonator for nitrogen vacancy centers in diamond
Authors:
Erik Eisenach,
John Barry,
Roberto Rojas,
Linh M. Pham,
Dirk R. Englund,
Danielle Braje
Abstract:
We present an S-band tunable loop gap resonator (LGR) providing strong, homogeneous, and directionally uniform broadband microwave (MW) drive for nitrogen-vacancy (NV) ensembles. With 42 dBm of input power, the composite device provides drive field amplitudes approaching 5 G over a circular area $\gtrsim\!50$ mm$^2$ or cylindrical volume $\gtrsim\!250$ mm$^3$. The wide 80 MHz device bandwidth allo…
▽ More
We present an S-band tunable loop gap resonator (LGR) providing strong, homogeneous, and directionally uniform broadband microwave (MW) drive for nitrogen-vacancy (NV) ensembles. With 42 dBm of input power, the composite device provides drive field amplitudes approaching 5 G over a circular area $\gtrsim\!50$ mm$^2$ or cylindrical volume $\gtrsim\!250$ mm$^3$. The wide 80 MHz device bandwidth allows driving all eight NV Zeeman resonances for bias magnetic fields below 20 G. For pulsed applications the device realizes percent-scale microwave drive inhomogeneity; we measure a fractional root-mean-square inhomogeneity $σ_\text{rms}\!=\! 1.6\%$ and a peak-to-peak variation $σ_\text{pp}\!=\! 3\%$ over a circular area of 11 mm$^2$, and $σ_\text{rms} \!=\! 3.2\%$ and $σ_\text{pp}\! =\! 10.5\%$ over a larger 32 mm$^2$ circular area. We demonstrate incident MW power coupling to the LGR using multiple methodologies: a PCB-fabricated exciter antenna for deployed compact bulk sensors and an inductive coupling coil suitable for microscope-style imaging. The inductive coupling coil allows for approximately $2π$ steradian combined optical access above and below the device, ideal for envisioned and existing NV imaging and bulk sensing applications.
△ Less
Submitted 25 April, 2018;
originally announced April 2018.
-
Construction and Performance of the Barrel Electromagnetic Calorimeter for the GlueX Experiment
Authors:
Tegan Beattie,
Ahmed Foda,
Colleen Henschel,
S Katsaganis,
Shaun Krueger,
George Lolos,
Zisis Papandreou,
E. L. Plummer,
Irina Semenova,
Andrei Semenov,
Fernando Barbosa,
Eugene Chudakov,
Mark Dalton,
David Lawrence,
Yi Qiang,
Nicholas Sandoval,
Elton Smith,
Christopher Stanislav,
Justin Stevens,
Simon Taylor,
Timothy Whitlatch,
Benedikt Zihlmann,
William Levine,
William McGinley,
Curtis Meyer
, et al. (14 additional authors not shown)
Abstract:
The barrel calorimeter is part of the new spectrometer installed in Hall D at Jefferson Lab for the GlueX experiment. The calorimeter was installed in 2013, commissioned in 2014 and has been operating routinely since early 2015. The detector configuration, associated Monte Carlo simulations, calibration and operational performance are described herein. The calorimeter records the time and energy d…
▽ More
The barrel calorimeter is part of the new spectrometer installed in Hall D at Jefferson Lab for the GlueX experiment. The calorimeter was installed in 2013, commissioned in 2014 and has been operating routinely since early 2015. The detector configuration, associated Monte Carlo simulations, calibration and operational performance are described herein. The calorimeter records the time and energy deposited by charged and neutral particles created by a multi-GeV photon beam. It is constructed as a lead and scintillating-fiber calorimeter and read out with 3840 large-area silicon photomultiplier arrays. Particles impinge on the detector over a wide range of angles, from normal incidence at 90 degrees down to 11.5 degrees, which defines a geometry that is fairly unique among calorimeters. The response of the calorimeter has been measured during a running experiment and performs as expected for electromagnetic showers below 2.5 GeV. We characterize the performance of the BCAL using the energy resolution integrated over typical angular distributions for $π^0$ and $η$ production of $σ_E/E$=5.2\%/$\sqrt{E(\rm{GeV})} \oplus$ 3.6\% and a timing resolution of $σ$\,=\,150\,ps at 1\,GeV.
△ Less
Submitted 20 April, 2018; v1 submitted 9 January, 2018;
originally announced January 2018.
-
Improving randomness characterization through Bayesian model selection
Authors:
Rafael Díaz Hernández Rojas,
Aldo Solís,
Alí M. Angulo Martínez,
Alfred B. U'Ren,
Jorge G. Hirsch,
Matteo Marsili,
Isaac Pérez Castillo
Abstract:
Nowadays random number generation plays an essential role in technology with important applications in areas ranging from cryptography, which lies at the core of current communication protocols, to Monte Carlo methods, and other probabilistic algorithms. In this context, a crucial scientific endeavour is to develop effective methods that allow the characterization of random number generators. Howe…
▽ More
Nowadays random number generation plays an essential role in technology with important applications in areas ranging from cryptography, which lies at the core of current communication protocols, to Monte Carlo methods, and other probabilistic algorithms. In this context, a crucial scientific endeavour is to develop effective methods that allow the characterization of random number generators. However, commonly employed methods either lack formality (e.g. the NIST test suite), or are inapplicable in principle (e.g. the characterization derived from the Algorithmic Theory of Information (ATI)). In this letter we present a novel method based on Bayesian model selection, which is both rigorous and effective, for characterizing randomness in a bit sequence. We derive analytic expressions for a model's likelihood which is then used to compute its posterior probability distribution. Our method proves to be more rigorous than NIST's suite and the Borel-Normality criterion and its implementation is straightforward. We have applied our method to an experimental device based on the process of spontaneous parametric downconversion, implemented in our laboratory, to confirm that it behaves as a genuine quantum random number generator (QRNG). As our approach relies on Bayesian inference, which entails model generalizability, our scheme transcends individual sequence analysis, leading to a characterization of the source of the random sequences itself.
△ Less
Submitted 12 June, 2017; v1 submitted 17 August, 2016;
originally announced August 2016.
-
Performance of a Full-Size Small-Strip Thin Gap Chamber Prototype for the ATLAS New Small Wheel Muon Upgrade
Authors:
Angel Abusleme,
Camille Bélanger-Champagne,
Alain Bellerive,
Yan Benhammou,
James Botte,
Hadar Cohen,
Merlin Davies,
Yanyan Du,
Lea Gauthier,
Thomas Koffas,
Serguei Kuleshov,
Benoit Lefebvre,
Changyu Li,
Nachman Lupu,
Giora Mikenberg,
Daniel Mori,
Jean-Pierre Ochoa-Ricoux,
Estel Perez Codina,
Sebastien Rettie,
Andree Robichaud-Véronneau,
Rimsky Rojas,
Meir Shoa,
Vladimir Smakhtin,
Bernd Stelzer,
Oliver Stelzer-Chilton
, et al. (10 additional authors not shown)
Abstract:
The instantaneous luminosity of the Large Hadron Collider at CERN will be increased up to a factor of five with respect to the present design value by undergoing an extensive upgrade program over the coming decade. The most important upgrade project for the ATLAS Muon System is the replacement of the present first station in the forward regions with the so-called New Small Wheels (NSWs). The NSWs…
▽ More
The instantaneous luminosity of the Large Hadron Collider at CERN will be increased up to a factor of five with respect to the present design value by undergoing an extensive upgrade program over the coming decade. The most important upgrade project for the ATLAS Muon System is the replacement of the present first station in the forward regions with the so-called New Small Wheels (NSWs). The NSWs will be installed during the LHC long shutdown in 2018/19. Small-Strip Thin Gap Chamber (sTGC) detectors are designed to provide fast trigger and high precision muon tracking under the high luminosity LHC conditions. To validate the design, a full-size prototype sTGC detector of approximately 1.2 $\times$ $1.0\, \mathrm{m}^2$ consisting of four gaps has been constructed. Each gap provides pad, strip and wire readouts. The sTGC intrinsic spatial resolution has been measured in a $32\, \mathrm{GeV}$ pion beam test at Fermilab. At perpendicular incidence angle, single gap position resolutions of about $50\,\mathrm{μm}$ have been obtained, uniform along the sTGC strip and perpendicular wire directions, well within design requirements. Pad readout measurements have been performed in a $130\, \mathrm{GeV}$ muon beam test at CERN. The transition region between readout pads has been found to be $4\,\mathrm{mm}$, and the pads have been found to be fully efficient.
△ Less
Submitted 21 September, 2015;
originally announced September 2015.
-
Analytical model for waveguide light propagation and applications
Authors:
Santiago Rojas Rojas,
Luis Morales-Inostroza,
Uta Naether,
Guilherme B. Xavier,
Stefan Nolte,
Alexander Szameit,
Rodrigo A. Vicencio,
Gustavo Lima,
Aldo Delgado
Abstract:
We study the polarization properties of elliptical femtosecond-laser-written waveguides arrays. A new analytical model is presented to explain the asymmetry of the spatial transverse profiles of linearly polarized modes in these waveguides. This asymmetry produces a polarization dependent coupling coefficient, between adjacent waveguides, which strongly affects the propagation of light in a lattic…
▽ More
We study the polarization properties of elliptical femtosecond-laser-written waveguides arrays. A new analytical model is presented to explain the asymmetry of the spatial transverse profiles of linearly polarized modes in these waveguides. This asymmetry produces a polarization dependent coupling coefficient, between adjacent waveguides, which strongly affects the propagation of light in a lattice. Our analysis explains how this effect can be exploited to tune the final intensity distribution of light propagated through the array, and links the properties of a polarizing beam splitter in integrated optical circuits to the geometry of the waveguides.
△ Less
Submitted 15 December, 2014; v1 submitted 8 September, 2014;
originally announced September 2014.
-
Origin of the springs of Costa Verde beach in Lima Peru
Authors:
Ruben Rojas,
Modesto Montoya,
Enoc Mamani,
Jose Maguina,
Eduardo Montoya,
Oscar Baltuano,
Patricia Bedregal,
Lucy Coria,
Alcides Guerra,
Santiago Justo,
Tania Churasacari
Abstract:
This paper tries to determine the origin of springs on the Costa Verde beach, located in the district of Barranco, Miraflores and Magdalena, province of Lima, Peru. These springs emerge near the shoreline, from the lower layers of a 80 meter high cliff. They have survived the process of urbanization of agricultural land, started in the early 70, which decreased the water table aquifer of Lima, and…
▽ More
This paper tries to determine the origin of springs on the Costa Verde beach, located in the district of Barranco, Miraflores and Magdalena, province of Lima, Peru. These springs emerge near the shoreline, from the lower layers of a 80 meter high cliff. They have survived the process of urbanization of agricultural land, started in the early 70, which decreased the water table aquifer of Lima, and wiped the water leaks from the cliffs. To identify the source of the springs, isotopic, physical, chemical and bacteriological analysis was carried out for samples from five springs. The isotopic concentrations in waters from Costa Verde springs are depleted compared to those obtained for Lima aquifer waters, which is recharged by infiltration of the Rimac River. The measured values of those concentrations suggest that water from the Costa Verde springs should come from a direct recharge in the upper and middle basin, due to infiltration of rainfall or the river at an altitude of about 3600 m. Conductivity and temperature, measured in situ, are similar to those obtained on Lima aquifers. The laboratory analysis showed no significant levels of total or fecal coliform, discarding possible leakage from Lima sewerage.
△ Less
Submitted 9 May, 2013;
originally announced May 2013.
-
Modeling the onset of photosynthesis after the Chicxulub asteroid impact
Authors:
Noel Perez,
Rolando Cardenas,
Osmel Martin,
Reinaldo Rojas
Abstract:
We do a preliminary modelling of the photosynthetic rates of phytoplankton at the very beginning of the Paleogene, just after the impact of the Chicxulub asteroid, which decisively contributed to the last known mass extinction of the Phanerozoic eon. We assume the worst possible scenario from the photobiological point of view: an already clear atmosphere with no ozone, as the timescale for soot an…
▽ More
We do a preliminary modelling of the photosynthetic rates of phytoplankton at the very beginning of the Paleogene, just after the impact of the Chicxulub asteroid, which decisively contributed to the last known mass extinction of the Phanerozoic eon. We assume the worst possible scenario from the photobiological point of view: an already clear atmosphere with no ozone, as the timescale for soot and dust settling (years) is smaller than that of the full ozone regeneration (decades). Even in these conditions we show that most phytoplankton species would have had reasonable potential for photosynthesis in all the three main optical ocean water types. This modelling could help explain why the recovery of phytoplankton was relatively rapid after the huge environmental stress of that asteroid impact. In a more general scope, it also reminds us of the great resilience of the unicellular biosphere against huge environmental perturbations.
△ Less
Submitted 19 September, 2012;
originally announced September 2012.
