-
Dargana: fine-tuning EarthPT for dynamic tree canopy mapping from space
Authors:
Michael J. Smith,
Luke Fleming,
James E. Geach,
Ryan J. Roberts,
Freddie Kalaitzis,
James Banister
Abstract:
We present Dargana, a fine-tuned variant of the EarthPT time-series foundation model that achieves specialisation using <3% of its pre-training data volume and 5% of its pre-training compute. Dargana is fine-tuned to generate regularly updated classification of tree canopy cover at 10m resolution, distinguishing conifer and broadleaved tree types. Using Cornwall, UK, as a test case, the model achi…
▽ More
We present Dargana, a fine-tuned variant of the EarthPT time-series foundation model that achieves specialisation using <3% of its pre-training data volume and 5% of its pre-training compute. Dargana is fine-tuned to generate regularly updated classification of tree canopy cover at 10m resolution, distinguishing conifer and broadleaved tree types. Using Cornwall, UK, as a test case, the model achieves a pixel-level ROC-AUC of 0.98 and a PR-AUC of 0.83 on unseen satellite imagery. Dargana can identify fine structures like hedgerows and coppice below the training sample limit, and can track temporal changes to canopy cover such as new woodland establishment. Our results demonstrate how pre-trained Large Observation Models like EarthPT can be specialised for granular, dynamic land cover monitoring from space, providing a valuable, scalable tool for natural capital management and conservation.
△ Less
Submitted 24 April, 2025;
originally announced April 2025.
-
Three-Dimensional and Selective Displacement Sensing of a Levitated Nanoparticle via Spatial Mode Decomposition
Authors:
Thomas Dinter,
Reece Roberts,
Thomas Volz,
Mikolaj K. Schmidt,
Cyril Laplane
Abstract:
We propose and experimentally demonstrate a novel detection method that significantly improves the precision of real-time measurement of the three-dimensional displacement of a levitated dipolar scatterer. Our technique relies on the spatial mode decomposition of the light scattered by the levitated object, allowing us to simultaneously and selectively extract the position information of all trans…
▽ More
We propose and experimentally demonstrate a novel detection method that significantly improves the precision of real-time measurement of the three-dimensional displacement of a levitated dipolar scatterer. Our technique relies on the spatial mode decomposition of the light scattered by the levitated object, allowing us to simultaneously and selectively extract the position information of all translational degrees of freedom with minimal losses. To this end, we collect all the light back-scattered from a levitated nanoparticle using a parabolic mirror and couple it into a spatial mode sorter. The sorter effectively demultiplexes the information content of the scattered electric field, resulting in each of the nanoparticle's translational degrees of freedom being selectively encoded in the amplitude of orthogonal optical modes. We report measurement efficiencies of ${(η_{^{\mathrm{tot}}}^{_{x}}, η_{^{\mathrm{tot}}}^{_{y}}, η_{^{\mathrm{tot}}}^{_{z}}) = (0.14, 0.16, 0.32)}$ $>$ 1/9, which should enable the 3D motional quantum ground state of a levitated optomechanical system. Further, we believe this technique opens up the possibility to implement coherent feedback control of a levitated nanoparticle.
△ Less
Submitted 5 November, 2024; v1 submitted 13 September, 2024;
originally announced September 2024.
-
Inert shell coating for enhanced laser refrigeration of nanoparticles: application in levitated optomechanics
Authors:
Cyril Laplane,
Peng Ren,
Reece P. Roberts,
Yiqing Lu,
Thomas Volz
Abstract:
We report on a study exploring the design of nanoparticles that can enhance their laser refrigeration efficiency for applications in levitated optomechanics. In particular, we developed lanthanide-doped nanocrystals with an inert shell coating and compared their performance with bare nanocrystals. While optically levitated, we studied the refrigeration of both types of nanoparticles while varying…
▽ More
We report on a study exploring the design of nanoparticles that can enhance their laser refrigeration efficiency for applications in levitated optomechanics. In particular, we developed lanthanide-doped nanocrystals with an inert shell coating and compared their performance with bare nanocrystals. While optically levitated, we studied the refrigeration of both types of nanoparticles while varying the pressure. We found that the core-shell design shows an improvement in the minimum final temperature: a fourth of the core-shell nanoparticles showed a significant cooling compared to almost none of the bare nanoparticles. Furthermore, we measured a core-shell nanoparticle cooling down to a temperature of 147 K at 26 mbar in the underdamped regime. Our study is a first step towards engineering nanoparticles that are suitable for achieving absolute (centre-of-mass and internal temperature) cooling in levitation, opening new avenues for force sensing and the realization of macroscopic quantum superpositions.
△ Less
Submitted 13 July, 2023; v1 submitted 5 July, 2023;
originally announced July 2023.
-
Roadmap for Optical Tweezers
Authors:
Giovanni Volpe,
Onofrio M. Maragò,
Halina Rubinzstein-Dunlop,
Giuseppe Pesce,
Alexander B. Stilgoe,
Giorgio Volpe,
Georgiy Tkachenko,
Viet Giang Truong,
Síle Nic Chormaic,
Fatemeh Kalantarifard,
Parviz Elahi,
Mikael Käll,
Agnese Callegari,
Manuel I. Marqués,
Antonio A. R. Neves,
Wendel L. Moreira,
Adriana Fontes,
Carlos L. Cesar,
Rosalba Saija,
Abir Saidi,
Paul Beck,
Jörg S. Eismann,
Peter Banzer,
Thales F. D. Fernandes,
Francesco Pedaci
, et al. (58 additional authors not shown)
Abstract:
Optical tweezers are tools made of light that enable contactless pushing, trapping, and manipulation of objects ranging from atoms to space light sails. Since the pioneering work by Arthur Ashkin in the 1970s, optical tweezers have evolved into sophisticated instruments and have been employed in a broad range of applications in life sciences, physics, and engineering. These include accurate force…
▽ More
Optical tweezers are tools made of light that enable contactless pushing, trapping, and manipulation of objects ranging from atoms to space light sails. Since the pioneering work by Arthur Ashkin in the 1970s, optical tweezers have evolved into sophisticated instruments and have been employed in a broad range of applications in life sciences, physics, and engineering. These include accurate force and torque measurement at the femtonewton level, microrheology of complex fluids, single micro- and nanoparticle spectroscopy, single-cell analysis, and statistical-physics experiments. This roadmap provides insights into current investigations involving optical forces and optical tweezers from their theoretical foundations to designs and setups. It also offers perspectives for applications to a wide range of research fields, from biophysics to space exploration.
△ Less
Submitted 28 June, 2022;
originally announced June 2022.
-
High-efficiency Ventilated Metamaterial Absorber at Low Frequency
Authors:
Xiaoxiao Wu,
Ka Yan Au-Yeung,
Xin Li,
Robert Christopher Roberts,
Jingxuan Tian,
Chuandeng Hu,
Yingzhou Huang,
Shuxia Wang,
Zhiyu Yang,
Weijia Wen
Abstract:
We demonstrate a ventilated metamaterial absorber operating at low frequency (< 500 Hz).With only two layers of the absorption units, high-efficiency absorption (> 90%) has been achieved in both simulations and experiments. This high-efficiency absorption under ventilation condition is originated from the weak coupling of the two identical split tube resonators constituting the absorber, which lea…
▽ More
We demonstrate a ventilated metamaterial absorber operating at low frequency (< 500 Hz).With only two layers of the absorption units, high-efficiency absorption (> 90%) has been achieved in both simulations and experiments. This high-efficiency absorption under ventilation condition is originated from the weak coupling of the two identical split tube resonators constituting the absorber, which leads to the hybridization of the degenerate eigenmodes and breaks the absorption upper limit of 50% for conventional transmissive symmetric acoustic absorbers. The absorber can also be extended to an array and work in free space. The absorber should have potential applications in acoustic engineering where both noise reduction and ventilation are required.
△ Less
Submitted 24 February, 2018; v1 submitted 10 January, 2018;
originally announced January 2018.
-
A double-correlation tremor-location method
Authors:
Ka Lok Li,
Giulia Sgattoni,
Hamzeh Sadeghisorkhani,
Roland Roberts,
Ólafur Gudmundsson
Abstract:
A double-correlation method is introduced to locate tremor sources based on stacks of complex, doubly-correlated tremor records of multiple triplets of seismographs back projected to hypothetical source locations in a geographic grid. Peaks in the resulting stack of moduli are inferred source locations. The stack of the moduli is a robust measure of energy radiated from a point source or point sou…
▽ More
A double-correlation method is introduced to locate tremor sources based on stacks of complex, doubly-correlated tremor records of multiple triplets of seismographs back projected to hypothetical source locations in a geographic grid. Peaks in the resulting stack of moduli are inferred source locations. The stack of the moduli is a robust measure of energy radiated from a point source or point sources even when the velocity information is imprecise. Application to real data shows how double correlation focuses the source mapping compared to the common single correlation approach. Synthetic tests demonstrate the robustness of the method and its resolution limitations which are controlled by the station geometry, the finite frequency of the signal, the quality of the used velocity information and noise level. Both random noise and signal or noise correlated at time shifts that are inconsistent with the assumed velocity structure can be effectively suppressed. Assuming a surface-wave velocity, we can constrain the source location even if the surface-wave component does not dominate. The method can also in principle be used with body waves in three dimensions, although this requires more data and seismographs placed near the source for depth resolution.
△ Less
Submitted 23 September, 2016;
originally announced September 2016.
-
The 2011 unrest at Katla volcano: characterization and interpretation of the tremor sources
Authors:
Giulia Sgattoni,
Ólafur Gudmundsson,
Páll Einarsson,
Federico Lucchi,
Ka Lok Li,
Hamzeh Sadeghisorkhani,
Roland Roberts,
Ari Tryggvason
Abstract:
A 23 hour tremor burst was recorded on July 8-9th 2011 at the Katla subglacial volcano, one of the most active and hazardous volcanoes in Iceland. This was associated with deepening of cauldrons on the ice cap and a glacial flood that caused damage to infrastructure. Increased earthquake activity within the caldera started a few days before and lasted for months afterwards and new seismic activity…
▽ More
A 23 hour tremor burst was recorded on July 8-9th 2011 at the Katla subglacial volcano, one of the most active and hazardous volcanoes in Iceland. This was associated with deepening of cauldrons on the ice cap and a glacial flood that caused damage to infrastructure. Increased earthquake activity within the caldera started a few days before and lasted for months afterwards and new seismic activity started on the south flank. No visible eruption broke the ice and the question arose as to whether this episode relates to a minor subglacial eruption with the tremor being generated by volcanic processes, or by the flood. The tremor signal consisted of bursts with varying amplitude and duration. We have identified and described three different tremor phases, based on amplitude and frequency features. A tremor phase associated with the flood was recorded only at stations closest to the river that flooded, correlating in time with rising water level observed at gauging stations. Using back-projection of double cross-correlations, two other phases have been located near the active ice cauldrons and are interpreted to be caused by volcanic or hydrothermal processes. The greatly increased seismicity and evidence of rapid melting of the glacier may be explained by a minor sub-glacial eruption. It is also plausible that the tremor was generated by hydrothermal boiling and/or explosions with no magma involved. This may have been induced by pressure drop triggered by the release of water when the glacial flood started. All interpretations require an increase of heat released by the volcano.
△ Less
Submitted 2 September, 2016;
originally announced September 2016.
-
Innovative Science
Authors:
Donald W Braben,
John F Allen,
William Amos,
Richard Ball,
Hagan Bayley,
Tim Birkhead,
Peter Cameron,
Eleanor Campbell,
Richard Cogdell,
David Colquhoun,
Steve Davies,
Rod Dowler,
Peter Edwards,
Irene Engle,
Felipe Fernandez-Armesto,
Desmond Fitzgerald,
Jon Frampton,
Dame Anne Glover,
John Hall,
Pat Heslop-Harrison,
Dudley Herschbach,
Sui Huang,
H Jeff Kimble,
Sir Harry Kroto,
James Ladyman
, et al. (23 additional authors not shown)
Abstract:
Sir, We write as senior scientists about a problem vital to the scientific enterprise and prosperity. Nowadays, funding is a lengthy and complex business. First, universities themselves must approve all proposals for submission. Funding agencies then subject those that survive to peer review, a process by which a few researchers, usually acting anonymously, assess a proposal's chances that it will…
▽ More
Sir, We write as senior scientists about a problem vital to the scientific enterprise and prosperity. Nowadays, funding is a lengthy and complex business. First, universities themselves must approve all proposals for submission. Funding agencies then subject those that survive to peer review, a process by which a few researchers, usually acting anonymously, assess a proposal's chances that it will achieve its goals, is the best value for money, is relevant to a national priority and will impact on a socio-economic problem. Only 25% of proposals received by the funding agencies are funded. These protracted processes force researchers to exploit existing knowledge, severely discourage open-ended studies and are hugely time-consuming. They are also new: before 1970, few researchers wrote proposals. Now they are virtually mandatory.
△ Less
Submitted 23 September, 2015;
originally announced October 2015.
-
The Q_weak Experimental Apparatus
Authors:
Qweak Collaboration,
T. Allison,
M. Anderson,
D. Androic,
D. S. Armstrong,
A. Asaturyan,
T. D. Averett,
R. Averill,
J. Balewski,
J. Beaufait,
R. S. Beminiwattha,
J. Benesch,
F. Benmokhtar,
J. Bessuille,
J. Birchall,
E. Bonnell,
J. Bowman,
P. Brindza,
D. B. Brown,
R. D. Carlini,
G. D. Cates,
B. Cavness,
G. Clark,
J. C. Cornejo,
S. Covrig Dusa
, et al. (104 additional authors not shown)
Abstract:
The Jefferson Lab Q_weak experiment determined the weak charge of the proton by measuring the parity-violating elastic scattering asymmetry of longitudinally polarized electrons from an unpolarized liquid hydrogen target at small momentum transfer. A custom apparatus was designed for this experiment to meet the technical challenges presented by the smallest and most precise ${\vec{e}}$p asymmetry…
▽ More
The Jefferson Lab Q_weak experiment determined the weak charge of the proton by measuring the parity-violating elastic scattering asymmetry of longitudinally polarized electrons from an unpolarized liquid hydrogen target at small momentum transfer. A custom apparatus was designed for this experiment to meet the technical challenges presented by the smallest and most precise ${\vec{e}}$p asymmetry ever measured. Technical milestones were achieved at Jefferson Lab in target power, beam current, beam helicity reversal rate, polarimetry, detected rates, and control of helicity-correlated beam properties. The experiment employed 180 microA of 89% longitudinally polarized electrons whose helicity was reversed 960 times per second. The electrons were accelerated to 1.16 GeV and directed to a beamline with extensive instrumentation to measure helicity-correlated beam properties that can induce false asymmetries. Moller and Compton polarimetry were used to measure the electron beam polarization to better than 1%. The electron beam was incident on a 34.4 cm liquid hydrogen target. After passing through a triple collimator system, scattered electrons between 5.8 degrees and 11.6 degrees were bent in the toroidal magnetic field of a resistive copper-coil magnet. The electrons inside this acceptance were focused onto eight fused silica Cerenkov detectors arrayed symmetrically around the beam axis. A total scattered electron rate of about 7 GHz was incident on the detector array. The detectors were read out in integrating mode by custom-built low-noise pre-amplifiers and 18-bit sampling ADC modules. The momentum transfer Q^2 = 0.025 GeV^2 was determined using dedicated low-current (~100 pA) measurements with a set of drift chambers before (and a set of drift chambers and trigger scintillation counters after) the toroidal magnet.
△ Less
Submitted 6 January, 2015; v1 submitted 24 September, 2014;
originally announced September 2014.
-
Log-Periodic Dipole Array Antenna as a Chipless Radio-Frequeny Identification (RFID) Tag
Authors:
Shulabh Gupta,
Gui Jun Li,
Robert Chris Roberts,
Li Jun Jiang
Abstract:
A passive chipless Radio-frequency identification (RFID) tag based on log-periodic (LP) dipole array is proposed, where the tailorable band-rejection property of the LP aperture is utilized to realize large number of codes. The proposed tag principle is successfully validated using measurements, where the absence and presence of the band-rejection, is shown to carry the bit information. Its fabric…
▽ More
A passive chipless Radio-frequency identification (RFID) tag based on log-periodic (LP) dipole array is proposed, where the tailorable band-rejection property of the LP aperture is utilized to realize large number of codes. The proposed tag principle is successfully validated using measurements, where the absence and presence of the band-rejection, is shown to carry the bit information. Its fabrication simplicity is also demonstrated by its implementation on a flexible substrate. Finally, two different tag formation schemes, based on specific set of resonance suppressions, are discussed in detailed.
△ Less
Submitted 24 December, 2013;
originally announced December 2013.
-
A High Efficiency Ultra High Vacuum Compatible Flat Field Spectrometer for EUV Wavelengths
Authors:
B. Blagojevic,
Eric-Olivier Le Bigot,
K. Fahy,
A. Aguilar,
K. Makonyi,
E. Takács,
J. N. Tan,
J. M. Pomeroy,
J. H. Burnett,
J. D. Gillaspy,
J. R. Roberts
Abstract:
A custom, flat field, extreme ultraviolet EUV spectrometer built specifically for use with low power light sources that operate under ultrahigh vacuum conditions is reported. The spectral range of the spectrometer extends from 4 nm to 40 nm. The instrument optimizes the light gathering power and signal to noise ratio while achieving good resolution. A detailed description of the spectrometer and…
▽ More
A custom, flat field, extreme ultraviolet EUV spectrometer built specifically for use with low power light sources that operate under ultrahigh vacuum conditions is reported. The spectral range of the spectrometer extends from 4 nm to 40 nm. The instrument optimizes the light gathering power and signal to noise ratio while achieving good resolution. A detailed description of the spectrometer and design considerations are presented, as well as a novel procedure that could be used to obtain a synthetic wavelength calibration with the aid of only a single known spectral feature. This synthetic wavelength calibration is compared to a standard wavelength calibration obtained from previously reported spectral lines of Xe, Ar and Ne ions recorded with this spectrometer.
△ Less
Submitted 8 August, 2005;
originally announced August 2005.
