-
Low-density functionalized amorphous carbon nanofoam as binder-free Supercapacitor electrode
Authors:
Subrata Ghosh,
Massimiliano Righi,
Andrea Macrelli,
Francesco Goto,
Marco Agozzino,
Gianlorenzo Bussetti,
Valeria Russo,
Andrea Li Bassi,
Carlo S. Casari
Abstract:
Nanoporous carbon materials containing small domains of sp2-carbon with highly disordered structures are promising for supercapacitor applications. Herein, we synthesize amorphous carbon nanofoam with 98% volumetric void fraction and low mass density of around 30 mg/cm3 by pulsed laser deposition at room temperature. With the unavoidable oxygen functional groups on the nanoporous surface, carbon n…
▽ More
Nanoporous carbon materials containing small domains of sp2-carbon with highly disordered structures are promising for supercapacitor applications. Herein, we synthesize amorphous carbon nanofoam with 98% volumetric void fraction and low mass density of around 30 mg/cm3 by pulsed laser deposition at room temperature. With the unavoidable oxygen functional groups on the nanoporous surface, carbon nanofoam and nitrogen-functionalized carbon nanofoams are directly grown on the desired substrate under different background gases (Ar, N2, N2-H2), and employed as supercapacitor electrodes. Among the background gases used in synthesis, the use of nitrogen yields nanofoam with higher thickness and more N-content with higher graphitic-N. From the test of amorphous carbon nanofoam supercapacitor device, nitrogenated amorphous carbon electrode shows a higher areal capacitance of 4.1 mF/cm2 at 20 mV/s in aqueous electrolyte, a better capacitance retention at higher current, and excellent cycle stability (98%) over 10000 charge-discharge cycles are achieved compared to not-functionalized counterpart prepared under Ar background gas (2.7 mF/cm2 and cycle stability of 88%).
△ Less
Submitted 17 March, 2025; v1 submitted 30 October, 2024;
originally announced October 2024.
-
Cumulenic sp-carbon Atomic Wires Wrapped Polymers for Supercapacitor Application
Authors:
Subrata Ghosh,
Massimiliano Righi,
Simone Melesi,
Yu Qiu,
Rik R. Tykwinski,
Carlo S. Casari
Abstract:
Carbon atomic wires, a linear atomic chain of sp-carbon, is theoretically predicted to have around five times higher surface area than graphene, notable charge mobilities, as well as excellent optical and thermal properties. Despite these impressive properties, the properties of sp-carbon as an electrochemical energy-storage electrode have not been reported so far. Herein, we prepare solution proc…
▽ More
Carbon atomic wires, a linear atomic chain of sp-carbon, is theoretically predicted to have around five times higher surface area than graphene, notable charge mobilities, as well as excellent optical and thermal properties. Despite these impressive properties, the properties of sp-carbon as an electrochemical energy-storage electrode have not been reported so far. Herein, we prepare solution processed thin films of tetraphenyl[3]cumulenic sp-carbon atomic wires embedded in a polymer matrix, in which sp-carbon atomic wires feature three cumulated carbon-carbon double bonds terminated at each end by two phenyl groups. Raman and UV-visible spectroscopy are used to confirm the presence and possible degradation of sp-carbons inside the polymeric matrix. Finally, we investigate the supercapacitor performance of cumulenic sp-carbon atomic wires embedded polymer in three aqueous mediums, namely 1M Na2SO4 (neutral), 1M H2SO4 (acidic), and 6M KOH (basic). The results suggest 6M KOH is the best electrolyte to obtain high charge-storage performance of device with areal capacitance of 2.4 mF/cm2 at 20 mV/s, 85% cycle stability after 10000 charge-discharge cycles, and excellent frequency response.
△ Less
Submitted 30 October, 2024;
originally announced October 2024.
-
One-step Pulsed Laser Deposition of Metal oxynitride/Carbon Composites for Supercapacitor Application
Authors:
Subrata Ghosh,
Giacomo Pagani,
Massimilano Righi,
Chengxi Hou,
Valeria Russo,
Carlo S. Casari
Abstract:
Advanced material composite of nanocarbons and metal-based materials provides a synergistic effect to obtain excellent electrochemical charge-storage performance and other properties. Herein, 3D porous carbon-metal oxynitride nanocomposites with tunable carbon/metal and oxygen/nitrogen ratio are synthesized uniquely by simultaneous ablation from two different targets by single-step pulsed laser de…
▽ More
Advanced material composite of nanocarbons and metal-based materials provides a synergistic effect to obtain excellent electrochemical charge-storage performance and other properties. Herein, 3D porous carbon-metal oxynitride nanocomposites with tunable carbon/metal and oxygen/nitrogen ratio are synthesized uniquely by simultaneous ablation from two different targets by single-step pulsed laser deposition at room temperature. Co-ablation of titanium and vanadium nitride targets together with graphite allowed us to synthesize carbon-metal oxynitride porous nanocomposite and exploit them as a binder-free thin film supercapacitor electrode in aqueous electrolyte. We show that the elemental composition ratio and hence the structural properties can be tuned by selecting target configuration and by manipulating the ablation position. We investigate how this tuning capability impacts their charge-storage performances. We anticipate the utilization of as-synthesized various composites in a single PLD production run as next-generation active materials for flexible energy storage and optoelectronic applications.
△ Less
Submitted 29 August, 2024; v1 submitted 16 May, 2024;
originally announced May 2024.
-
Ballistic-aggregated Carbon Nanofoam in Target-side of Pulsed Laser Deposition for Energy Storage Applications
Authors:
Subrata Ghosh,
Massimiliano Righi,
Andrea Macrelli,
Giorgio Divitini,
Davide Orecchia,
Alessandro Maffini,
Francesco Goto,
Gianlorenzo Bussetti,
David Dellasega,
Valeria Russo,
Andrea Li Bassi,
Carlo S. Casari
Abstract:
In pulsed laser deposition, along the traditionally exploited deposition on the front-side of the plasma-plume, a coating forms on the surface of the target as well. For reproducibility, this residue is usually cleaned and discarded. Here we instead investigate the target-side coated materials and employ them as a binder-free supercapacitor electrode. The ballistic-aggregated, target-side nanofoam…
▽ More
In pulsed laser deposition, along the traditionally exploited deposition on the front-side of the plasma-plume, a coating forms on the surface of the target as well. For reproducibility, this residue is usually cleaned and discarded. Here we instead investigate the target-side coated materials and employ them as a binder-free supercapacitor electrode. The ballistic-aggregated, target-side nanofoam is compact and features a larger fraction of sp2-carbon, higher nitrogen content with higher graphitic-N and lower oxygen content with fewer COOH groups than that of diffusive-aggregated conventional nanofoams. They are highly hydrogenated graphite-like amorphous carbon and superhydrophilic. The resulting symmetric micro-supercapacitor delivers higher volumetric capacitance of 522 mF/cm3 at 100 mV/s and 104% retention after 10000 charge-discharge cycles over conventional nanofoam (215 mF/cm3 and 85% retention) with an areal capacitance of 134 μF/cm2 at 120 Hz and ultrafast frequency response. Utilizing the normally discarded target-side material can therefore enable high performing devices while reducing waste, cost and energy input per usable product. leading towards a greater sustainability on nanomaterials synthesis and deposition techniques.
△ Less
Submitted 27 August, 2024; v1 submitted 14 May, 2024;
originally announced May 2024.
-
Effects of surface chemical modifications on the adhesion of metallic interfaces. An high-throughput analysis
Authors:
Emiliano Poli,
Michele Cutini,
Mohamed Ahmed Mohamed Abdelazim Nosir,
Omar Chehaimi,
Maria Clelia Righi
Abstract:
Chemical interactions between two surfaces in contact play a crucial role in determining the mechanical and tribological behavior of solid interfaces. These interactions can be quantified via adhesion energy, that is a measure of the strength by which two surfaces bind together. Several works in literature report how the presence of chemisorbed atoms at homo- and heterogeneous solid-solid interfac…
▽ More
Chemical interactions between two surfaces in contact play a crucial role in determining the mechanical and tribological behavior of solid interfaces. These interactions can be quantified via adhesion energy, that is a measure of the strength by which two surfaces bind together. Several works in literature report how the presence of chemisorbed atoms at homo- and heterogeneous solid-solid interfaces drastically change their proprieties. A precise evaluation of how different species at solid contacts modulates their adhesion would be extremely beneficial for a range of different technological fields: from metallurgy to nuclear fusion. In this work we have used and high-throughput approach to systematically explore the effects of the presence of non-metallic elements, at different concentrations, on the adsorption and adhesion energies of different homogeneous metallic interfaces. Together with the databases for the adsorption and the adhesion energies, we calculated several other properties such as the charge transferred at the interface, the d-band edge shift for the substrate the Bond order and the interfacial density redistribution for the hundreds of systems analyzed. These values were used to define different trends with respect to chemical and concentration parameters that could be useful for the development of engineered interfaces with selected properties. In particular we noticed how the substrate with low filling of d-band are the most prone to adsorb ad-atoms and how the adsorption of almost all non-metallic elements decreases the adhesion energy of solid interfaces, particularly in the case of Fluorine. Carbon and Boron were the only two ad-atoms species that showed an opposite trend increasing the adhesion energy instead.
△ Less
Submitted 28 June, 2023;
originally announced June 2023.
-
Se Nano-Powder Conversion into Lubricious 2D Selenide Layers by Tribochemical Reactions
Authors:
Philipp G. Grützmacher,
Michele Cutini,
Edoardo Marquis,
Manel Rodríguez Ripoll,
Helmut Riedl,
Philip Kutrowatz,
Stefan Bug,
Chia-Jui Hsu,
Johannes Bernardi,
M. Clelia Righi,
Carsten Gachot,
Ali Erdemir
Abstract:
Transition metal dichalcogenide (TMD) coatings have attracted enormous scientific and industrial interest due to their outstanding tribological behavior. The paradigmatic example is MoS2, even though selenides and tellurides have demonstrated superior tribological properties. Here, we describe an innovative in-operando conversion of Se nano-powders into lubricious 2D selenides by sprinkling them o…
▽ More
Transition metal dichalcogenide (TMD) coatings have attracted enormous scientific and industrial interest due to their outstanding tribological behavior. The paradigmatic example is MoS2, even though selenides and tellurides have demonstrated superior tribological properties. Here, we describe an innovative in-operando conversion of Se nano-powders into lubricious 2D selenides by sprinkling them onto sliding metallic surfaces coated with Mo and W thin films. Advanced material characterization confirms the tribochemical formation of a thin tribofilm containing selenides, reducing the coefficient of friction down to below 0.1 in ambient air, levels typically reached using fully formulated oils. Ab initio molecular dynamics simulations under tribological conditions reveal the atomistic mechanisms that result in shear-induced synthesis of selenide monolayers from nano-powders. The use of Se nano-powder provides thermal stability and prevents outgassing in vacuum environments. Additionally, the high reactivity of the Se nano-powder with the transition metal coating in the conditions prevailing in the contact interface yields highly reproducible results, making it particularly suitable for the replenishment of sliding components with solid lubricants, avoiding the long-lasting problem of TMD-lubricity degradation caused by environmental molecules. The suggested straightforward approach demonstrates an unconventional and smart way to synthesize TMDs in-operando and exploit their friction- and wear reducing impact.
△ Less
Submitted 27 April, 2023;
originally announced April 2023.
-
Accurate multiscale simulation of frictional interfaces by Quantum Mechanics/Green's Function molecular dynamics
Authors:
Seiji Kajita,
Alberto Pacini,
Gabriele Losi,
Nobuaki Kikkawa,
Maria Clelia Righi
Abstract:
Understanding frictional phenomena is a fascinating fundamental problem with huge potential impact on energy saving. Such an understanding requires monitoring what happens at the sliding buried interface, which is almost inaccessible by experiments. Simulations represent powerful tools in this context, yet a methodological step forward is needed to fully capture the multiscale nature of the fricti…
▽ More
Understanding frictional phenomena is a fascinating fundamental problem with huge potential impact on energy saving. Such an understanding requires monitoring what happens at the sliding buried interface, which is almost inaccessible by experiments. Simulations represent powerful tools in this context, yet a methodological step forward is needed to fully capture the multiscale nature of the frictional phenomena. Here, we present a multiscale approach based on linked ab initio and Green's function molecular dynamics, which is above the state-of-the-art techniques used in computational tribology as it allows for a realistic description of both the interfacial chemistry and energy dissipation due to bulk phonons in non-equilibrium conditions. By considering a technologically relevant system composed of two diamond surfaces with different degrees of passivation, we show that the presented method can be used not only for monitoring in real-time tribolochemical phenomena such as the tribologically-induced surface graphitization and passivation effects but also for estimating realistic friction coefficients. This opens the way to in silico experiments of tribology to test materials to reduce friction prior to that in real labs.
△ Less
Submitted 21 April, 2023;
originally announced April 2023.
-
On Elliptical Wings in Subsonic Flow: Indicial Lift Generation via CFD Simulations -- with Parametric Analytical Approximations
Authors:
Marcello Righi,
Marco berci
Abstract:
This study deals with the process and benefits of generating aerodynamic indicial-admittance functions with the support of computational fluid dynamics based on the Euler equations. A simple parametric analytical approximation is alongside developed based on linear lifting line and piston theory, for the sake of assessing the physical consistency of numerical solutions while investigating the suit…
▽ More
This study deals with the process and benefits of generating aerodynamic indicial-admittance functions with the support of computational fluid dynamics based on the Euler equations. A simple parametric analytical approximation is alongside developed based on linear lifting line and piston theory, for the sake of assessing the physical consistency of numerical solutions while investigating the suitability of theoretical models in the subsonic regime. Thin elliptical wings are hence considered and the design space is described by three parameters: wing aspect ratio (6, 8, 12, 20), free-stream Mach number (0.3, 0.5, 0.6) and flow perturbation type (angle of attack step, vertical sharp-edged gust). All numerical simulations exhibit good quality and weak sensitivity to parameters other than Mach number and flow aspect ratio, accounting for their combined effects. The benefit of using numerical results to tune analytical approximations and improve their accuracy is finally demonstrated by matching both initial and final behaviours of the wing lift development, with an effective synthesis of the high-fidelity features in the low-fidelity model.
△ Less
Submitted 18 January, 2020;
originally announced January 2020.
-
Subsonic Indicial Aerodynamics for Aerofoil's Unsteady Loads via Numerical and Analytical Methods
Authors:
Marco Berci,
Marcello Righi
Abstract:
This study deals with generating aerodynamic indicial-admittance functions for predicting the unsteady lift of two-dimensional aerofoils in subsonic flow, using approximate numerical and analytical formulations. Both a step-change in the angle of attack and a sharp-edge gust are suitably considered as small perturbations. Novel contributions concern both a systematic analysis of the computational…
▽ More
This study deals with generating aerodynamic indicial-admittance functions for predicting the unsteady lift of two-dimensional aerofoils in subsonic flow, using approximate numerical and analytical formulations. Both a step-change in the angle of attack and a sharp-edge gust are suitably considered as small perturbations. Novel contributions concern both a systematic analysis of the computational simulations process and an effective theoretical synthesis of its outcome, providing with sound cross-validation. Good practice for generating the indicial-admittance functions via computational fluid dynamics is first investigated for several Mach numbers, angles of attack and aerofoil profiles. Convenient analytical approximations of such indicial functions are then obtained by generalising those available for incompressible flow, taking advantage of acoustic wave theory for the non-circulatory airload and Prandtl-Glauert's scalability rule for the circulatory airload. An explicit parametric formula is newly proposed for modelling the latter as function of the Mach number in the absence of shock waves, while damped harmonic terms are effectively introduced for better approximating the former. Appropriate tuning of the analytical expressions is also derived in order to mimic the numerical solutions and successfully verify the rigor of superposing circulatory and non-circulatory theoretical contributions in the light of computational fluid dynamics. Results are finally shown and critically addressed with respect to the physical and mathematical assumptions employed, within a consistent framework.
△ Less
Submitted 8 August, 2016;
originally announced August 2016.
-
A Modified Gas-Kinetic Scheme for Turbulent Flow
Authors:
Marcello Righi
Abstract:
By analogy with the kinetic theory of gases, most turbulence modeling strate- gies rely on an eddy viscosity to model the unresolved turbulent fluctuations. How- ever, the ratio of unresolved to resolved scales - very much like a degree of rarefaction - is not taken into account by the popular conventional schemes, based on the Navier- Stokes equations. This paper investigates the simulation of tu…
▽ More
By analogy with the kinetic theory of gases, most turbulence modeling strate- gies rely on an eddy viscosity to model the unresolved turbulent fluctuations. How- ever, the ratio of unresolved to resolved scales - very much like a degree of rarefaction - is not taken into account by the popular conventional schemes, based on the Navier- Stokes equations. This paper investigates the simulation of turbulent flow with a gas- kinetic scheme. In so doing, the modeling of turbulence becomes part of the numerical scheme: the degree of rarefaction is automatically taken into account; the turbulent stress tensor is not constrained into a linear relation with the strain rate. Instead it is modeled on the basis of the analogy between particles and eddies, without any as- sumptions on the type of turbulence or flow class. The implementation of a turbulent gas-kinetic scheme into a finite-volume solver is put forward, with turbulent kinetic energy and dissipation supplied by an allied turbulence model. A number of flow cases, challenging for conventional RANS methods, are investigated; results show that the shock-turbulent boundary layer is captured in a much more convincing way by the gas-kinetic scheme.
△ Less
Submitted 14 August, 2013;
originally announced August 2013.
-
A Gas-Kinetic Scheme For The Simulation Of Compressible Turbulent Flows
Authors:
Marcello Righi
Abstract:
The kinetic theory of gases has suggested the idea of viscosity to model the effect of thermal fluctuations on the resolved flow. Supported by the assumed analogy between molecules and the eddies in a turbulent flows, the idea of an eddy viscosity has been put forward in the pioneering work by Lord Kelvin and Osborne Reynolds. In over hundred years of turbulence modeling, the numerical schemes ado…
▽ More
The kinetic theory of gases has suggested the idea of viscosity to model the effect of thermal fluctuations on the resolved flow. Supported by the assumed analogy between molecules and the eddies in a turbulent flows, the idea of an eddy viscosity has been put forward in the pioneering work by Lord Kelvin and Osborne Reynolds. In over hundred years of turbulence modeling, the numerical schemes adopted to simulate turbulent flow - with the exception of the Lattice Boltzmann methods - have never exploited this analogy in any other way. In this work, a gas-kinetic scheme is modified to simulate turbulent flow; the turbulent relaxation time is deduced from assumed turbulent quantities. The new scheme does not adopt an eddy viscosity, yet it relies even more strongly on the analogy between thermal and turbulent fluctuations, as turbulence dynamics is mathematically modeled by the Boltzmann equation. In the gas-kinetic scheme, a measure of the degree of rarefaction is introduced, as the ratio between unresolved and resolved time scales of motion. At low rarefaction, the turbulent gas-kinetic scheme deviates negligibly from a conventional Navier-Stokes scheme. However, as the degree of rarefaction increases, the kinetic effects become evident. This phenomenon is evident in the mathematical description of the turbulent stress tensor and also in numerical experiments. This study does not propose an innovative turbulence model or technique. It addresses the fact that the traditional coupling numerical scheme and turbulence modeling might improve the physical consistence of numerical simulations.
△ Less
Submitted 9 July, 2013; v1 submitted 8 February, 2013;
originally announced February 2013.
-
A gas-kinetic scheme for the simulation of turbulent flows
Authors:
Marcello Righi
Abstract:
Numerical schemes derived from gas-kinetic theory can be applied to simulations in the hydrodynamics limit, in laminar and also turbulent regimes. In the latter case, the underlying Boltzmann equation describes a distribution of eddies, in line with the concept of eddy viscosity developed by Lord Kelvin and Osborne Reynolds at the end of the nineteenth century. These schemes are physically more co…
▽ More
Numerical schemes derived from gas-kinetic theory can be applied to simulations in the hydrodynamics limit, in laminar and also turbulent regimes. In the latter case, the underlying Boltzmann equation describes a distribution of eddies, in line with the concept of eddy viscosity developed by Lord Kelvin and Osborne Reynolds at the end of the nineteenth century. These schemes are physically more consistent than schemes derived from the Navier-Stokes equations, which invariably assume infinite collisions between gas particles (or interactions between eddies) in the calculation of advective fluxes. In fact, in continuum regime too, the local Knudsen number can exceed the value 0.001 in shock layers, where gas-kinetic schemes outperform Navier-Stokes schemes, as is well known.
Simulation of turbulent flows benefit from the application of gas-kinetic schemes, as the turbulent Knudsen number (the ratio between the eddies' mean free path and the mean flow scale) can locally reach values well in excess of 0.001, not only in shock layers.
This study has investigated a few cases of shock - boundary layer interaction comparing a gas-kinetic scheme and a Navier-Stokes one, both with a standard k-ωturbulence model. Whereas the results obtained from the Navier-Stokes scheme are affected by the limitations of eddy viscosity two-equation models, the gas-kinetic scheme has performed much better without making any further assumption on the turbulent structures.
△ Less
Submitted 7 August, 2012;
originally announced August 2012.
