Showing 1–18 of 18 results for author: Rhodes, T

On Dual Mechanisms Limiting Density in the Negative Triangularity Tokamak

Authors: R. Hong, P. H. Diamond, O. Sauter, J. Chen, F. Khabanov, Z. Li, D. Liu, A. Marinoni, G. R. McKee, T. L. Rhodes, F. Scotti, K. E. Thome, G. R. Tynan, M. A. Van Zeeland, Z. Yan, L. Zeng, the DIII-D NT Team

Abstract: Achieving high plasma density is essential for maximizing thermonuclear power and thus crucial for realizing economically viable fusion energy; however, this is often constrained by a fundamental density limit. This study investigates the L-mode density limit in negative triangularity (NT) plasmas on the DIII-D tokamak, and the results provide novel insights into this long-standing challenge. We r… ▽ More Achieving high plasma density is essential for maximizing thermonuclear power and thus crucial for realizing economically viable fusion energy; however, this is often constrained by a fundamental density limit. This study investigates the L-mode density limit in negative triangularity (NT) plasmas on the DIII-D tokamak, and the results provide novel insights into this long-standing challenge. We report sustained operations at densities up to 1.8 times the conventional Greenwald limit with 13 MW of auxiliary heating power. Importantly, systematic power scans reveal distinct power scaling relationships for core ($n_{e} \propto P_{\text{SOL}}^{0.27\pm 0.03}$) and edge ($n_{e} \propto P_{\text{SOL}}^{0.42\pm 0.04}$) densities, which suggest different limiting mechanisms at play and point to a more nuanced picture than the traditional paradigm of a single, universal density limit. In this vein, detailed measurements were performed, revealing a complex interplay of macroscopic profiles, radiation patterns, and turbulent transport. Specifically, edge turbulent transport increased as density rose, leading to enhanced divertor radiation and subsequent MARFE onset. The edge density saturated abruptly following MARFE formation. In contrast, the core density continues to increase, ultimately limited by enhanced turbulence that exhibits characteristics of avalanche-like transport. Consistent with enhanced turbulence, toroidal rotation and the $E_r \times B$ flow shear also collapsed approaching the density limit. Taken together, these observations suggest that MARFE dynamics primarily govern the edge density limit, while turbulence-driven transport dominates the core density limit. These results also indicate the feasibility of operations significantly beyond the Greenwald density in high-power NT plasmas. This can potentially be attained through advanced control of core turbulence and MARFEs. △ Less

Submitted 3 April, 2025; originally announced April 2025.

Conceptual study on using Doppler backscattering to measure magnetic pitch angle in tokamak plasmas

Authors: AK Yeoh, VH Hall-Chen, QT Pratt, BS Victor, J Damba, TL Rhodes, NA Crocker, KR Fong, JC Hillesheim, FI Parra, J Ruiz Ruiz

Abstract: We introduce a new approach to measure the magnetic pitch angle profile in tokamak plasmas with Doppler backscattering (DBS), a technique traditionally used for measuring flows and density fluctuations. The DBS signal is maximised when its probe beam's wavevector is perpendicular to the magnetic field at the cutoff location, independent of the density fluctuations. Hence, if one could isolate this… ▽ More We introduce a new approach to measure the magnetic pitch angle profile in tokamak plasmas with Doppler backscattering (DBS), a technique traditionally used for measuring flows and density fluctuations. The DBS signal is maximised when its probe beam's wavevector is perpendicular to the magnetic field at the cutoff location, independent of the density fluctuations. Hence, if one could isolate this effect, DBS would then yield information about the magnetic pitch angle. By varying the toroidal launch angle, the DBS beam reaches cutoff with different angles with respect to the magnetic field, but with other properties remaining similar. Hence, the toroidal launch angle which gives maximum backscattered power is thus that which is matched to the pitch angle at the cutoff location, enabling inference of the magnetic pitch angle. We performed systematic scans of the DBS toroidal launch angle for repeated DIII-D tokamak discharges. Experimental DBS data from this scan were analysed and combined with Gaussian beam-tracing simulations using the Scotty code. The pitch-angle inferred from DBS is consistent with that from magnetics-only and motional-Stark-effect-constrained (MSE) equilibrium reconstruction in the edge. In the core, the pitch angles from DBS and magnetics-only reconstructions differ by one to two degrees, while simultaneous MSE measurements were not available. The uncertainty in these measurements was under a degree; we show that this uncertainty is primarily due to the error in toroidal steering, the number of toroidally separated measurements, and shot-to-shot repeatability. We find that the error of pitch-angle measurements can be reduced by optimising the poloidal launch angle and initial beam properties. △ Less

Submitted 26 February, 2025; originally announced February 2025.

Real-time steerable frequency-stepped Doppler Backscattering (DBS) System for local helicon wave electric field measurements on the DIII-D tokamak

Authors: S. Chowdhury, N. A. Crocker, W. A. Peebles, R. Lantsov, T. L. Rhodes, L. Zeng, B. Van Compernolle, S. Tang, R. I. Pinsker, A. C. Torrezan, J. Squire, R. Rupani, R. O'Neill, M. Cengher

Abstract: A new frequency-stepped Doppler backscattering (DBS) system has been integrated with a real-time steerable electron cyclotron heating launcher to probe local background turbulence (f<10 MHz) and high-frequency (20-550 MHz) density fluctuations in the DIII-D tokamak. The launcher enables 2D steering (horizontal and vertical) over wide angular ranges to optimize probe location and wavenumber respons… ▽ More A new frequency-stepped Doppler backscattering (DBS) system has been integrated with a real-time steerable electron cyclotron heating launcher to probe local background turbulence (f<10 MHz) and high-frequency (20-550 MHz) density fluctuations in the DIII-D tokamak. The launcher enables 2D steering (horizontal and vertical) over wide angular ranges to optimize probe location and wavenumber response, with vertical steering adjustable in real time during discharges. The DBS system utilizes a programmable frequency synthesizer with adjustable dwell time, capable of stepping across the E-band frequency range (60-90 GHz) in real time, launching either O or X-mode polarized millimeter waves. This setup facilitates diagnosis of the complex spatial structure of high-power (>200 kW) helicon waves (476 MHz) during current drive experiments. Real-time scans reveal broadband density fluctuations around the helicon frequency, attributed to backscattering of the DBS millimeter wave probe from plasma turbulence modulated by the helicon wave. These fluctuations appear as high-frequency sidebands in the turbulence spectrum, effectively 'tagging' the background turbulence with the helicon wave's electric field. This method allows for monitoring local helicon wave amplitude by comparing high-frequency signal amplitude to background turbulence. Coupled with real-time scanning of measurement location and wavenumber, this allows for rapid helicon wave power distribution determination during steady-state plasma operation, potentially validating predictive models like GENRAY or AORSA for helicon current drive in DIII-D plasmas. △ Less

Submitted 16 October, 2024; originally announced October 2024.

Comments: 14 Pages, 10 figs

Using Convolutional Neural Networks to detect Edge Localized Modes in DIII-D from Doppler Backscattering measurements

Authors: N. Q. X. Teo, V. H. Hall-Chen, K. Barada, R. J. H. Ng, L. Gu, A. K. Yeoh, Q. T. Pratt, X. Garbet, T. L. Rhodes

Abstract: In H-mode tokamak plasmas, the plasma is sometimes ejected beyond the edge transport barrier. These events are known as edge localized modes (ELMs). ELMs cause a loss of energy and damage the vessel walls. Understanding the physics of ELMs and by extension, how to detect and mitigate them, is an important challenge. In this paper, we focus on two diagnostic methods $\unicode{x2013}$ D-alpha spectr… ▽ More In H-mode tokamak plasmas, the plasma is sometimes ejected beyond the edge transport barrier. These events are known as edge localized modes (ELMs). ELMs cause a loss of energy and damage the vessel walls. Understanding the physics of ELMs and by extension, how to detect and mitigate them, is an important challenge. In this paper, we focus on two diagnostic methods $\unicode{x2013}$ D-alpha spectroscopy and Doppler backscattering (DBS). The former detects ELMs by measuring Balmer alpha emission while the latter uses microwave radiation to probe the plasma. DBS has the advantage of having higher temporal resolution and robustness to damage. These advantages of DBS diagnostics may be beneficial for future operational tokamaks and thus data processing techniques for DBS should be developed in preparation. In sight of this, we explore the training of neural networks to detect ELMs from DBS data, using D-alpha data as the ground truth. With shots found in the DIII-D database, the model is trained to classify each time step based on the occurrence of an ELM event. The results are promising. When tested on shots similar to those used for training, the model is capable of consistently achieving a high f1-score of 0.93. This score is a performance metric for imbalanced datasets that ranges between 0 and 1. We evaluate the performance of our neural network on a variety of ELMs $\unicode{x2013}$ grasssy, suppressed, and wide pedestal $\unicode{x2013}$ finding broad applicability. Beyond ELMs, our work demonstrates the wider feasibility of applying neural networks to data from DBS diagnostics. △ Less

Submitted 3 July, 2024; v1 submitted 3 June, 2024; originally announced June 2024.

Highest Fusion Performance without Harmful Edge Energy Bursts in Tokamak

Authors: SangKyeun Kim, Ricardo Shousha, SeongMoo Yang, Qiming Hu, SangHee Hahn, Azarakhsh Jalalvand, Jong-Kyu Park, Nikolas Christopher Logan, Andrew Oakleigh Nelson, Yong-Su Na, Raffi Nazikian, Robert Wilcox, Rongjie Hong, Terry Rhodes, Carlos Paz-Soldan, YoungMu Jeon, MinWoo Kim, WongHa Ko, JongHa Lee, Alexander Battey, Alessandro Bortolon, Joseph Snipes, Egemen Kolemen

Abstract: The path of tokamak fusion and ITER is maintaining high-performance plasma to produce sufficient fusion power. This effort is hindered by the transient energy burst arising from the instabilities at the boundary of high-confinement plasmas. The application of 3D magnetic perturbations is the method in ITER and possibly in future fusion power plants to suppress this instability and avoid energy bus… ▽ More The path of tokamak fusion and ITER is maintaining high-performance plasma to produce sufficient fusion power. This effort is hindered by the transient energy burst arising from the instabilities at the boundary of high-confinement plasmas. The application of 3D magnetic perturbations is the method in ITER and possibly in future fusion power plants to suppress this instability and avoid energy busts damaging the device. Unfortunately, the conventional use of the 3D field in tokamaks typically leads to degraded fusion performance and an increased risk of other plasma instabilities, two severe issues for reactor implementation. In this work, we present an innovative 3D field optimization, exploiting machine learning, real-time adaptability, and multi-device capabilities to overcome these limitations. This integrated scheme is successfully deployed on DIII-D and KSTAR tokamaks, consistently achieving reactor-relevant core confinement and the highest fusion performance without triggering damaging instabilities or bursts while demonstrating ITER-relevant automated 3D optimization for the first time. This is enabled both by advances in the physics understanding of self-organized transport in the plasma edge and by advances in machine-learning technology, which is used to optimize the 3D field spectrum for automated management of a volatile and complex system. These findings establish real-time adaptive 3D field optimization as a crucial tool for ITER and future reactors to maximize fusion performance while simultaneously minimizing damage to machine components. △ Less

Submitted 8 May, 2024; originally announced May 2024.

Broadening of the Divertor Heat Flux Profile in High Confinement Tokamak Fusion Plasmas with Edge Pedestals Limited by Turbulence in DIII-D

Authors: D. R. Ernst, A. Bortolon, C. S. Chang, S. Ku, F. Scotti, H. Q. Wang, Z. Yan, Jie Chen, C. Chrystal, F. Glass, S. Haskey, R. Hood, F. Khabanov, F. Laggner, C. Lasnier, G. R. McKee, T. L. Rhodes, D. Truong, J. Watkins

Abstract: Multi-machine empirical scaling predicts an extremely narrow heat exhaust layer in future high magnetic field tokamaks, producing high power densities that require mitigation. In the experiments presented, the width of this exhaust layer is nearly doubled using actuators to increase turbulent transport in the plasma edge. This is achieved in low collisionality, high confinement edge pedestals with… ▽ More Multi-machine empirical scaling predicts an extremely narrow heat exhaust layer in future high magnetic field tokamaks, producing high power densities that require mitigation. In the experiments presented, the width of this exhaust layer is nearly doubled using actuators to increase turbulent transport in the plasma edge. This is achieved in low collisionality, high confinement edge pedestals with their gradients limited by turbulent transport instead of large-scale, coherent instabilities. The exhaust heat flux profile width and divertor leg diffusive spreading both double as a high frequency band of turbulent fluctuations propagating in the electron diamagnetic direction doubles in amplitude. The results are quantitatively reproduced in electromagnetic XGC particle-in-cell simulations which show the heat flux carried by electrons emerges to broaden the heat flux profile, directly supported by Langmuir probe measurements. △ Less

Submitted 5 August, 2024; v1 submitted 29 February, 2024; originally announced March 2024.

Comments: 8 pages, 11 figures

Journal ref: Phys. Rev. Lett. 132, 235102 (2024)

ELM-free Enhanced Dα H-mode with Near Zero NBI Torque Injection in DIII-D Tokamak

Authors: T. Macwan, K. Barada, J. F. Parisi, R. Groebner, T. L. Rhodes, S. Banerjee, C. Chrystal, Q. Pratt, Z. Yan, H. Wang, L. Zeng, M. E. Austin, N. A. Crocker, W. A. Peebles

Abstract: Enhanced $D_α$ H-mode (EDA H-mode), an ELM-free H-mode regime, is explored in neutral beam heated, lower single null plasmas with near zero torque injection. This regime exhibits a good energy confinement ($\mathrm{H}_{\mathrm{98y2}}$ $\sim 1$) with $β_N \sim 2$, high density, regime access at low input power, and no ELMs. This paper further presents the time-resolved measurements of electron and… ▽ More Enhanced $D_α$ H-mode (EDA H-mode), an ELM-free H-mode regime, is explored in neutral beam heated, lower single null plasmas with near zero torque injection. This regime exhibits a good energy confinement ($\mathrm{H}_{\mathrm{98y2}}$ $\sim 1$) with $β_N \sim 2$, high density, regime access at low input power, and no ELMs. This paper further presents the time-resolved measurements of electron and ion density, temperature, plasma rotation, and radial electric field during the EDA H-mode phase and examines the dynamics of the edge quasi-coherent mode (QCM). Measurements using multiple fluctuation diagnostics reveal the QCM to be a separatrix spanning mode, peaking just inside the separatrix, existing in a wide range of $k_{\perp}ρ_s \sim 0.1-1.2$ with multiple harmonics, and propagating with a very small phase velocity in the plasma frame, where $k_{\perp}$ is the binormal wavenumber and $ρ_s$ is the ion sound radius. Linear gyrokinetic simulations of an EDA H-mode discharge with CGYRO indicates that the trapped electron mode (TEM) and electron temperature gradient (ETG) are dominant instabilities in the region where QCM is unstable. Qualitative analysis indicates that the properties of TEM are consistent with the experimental observed characteristics of the QCM. These similarities suggest that the QCM might be a TEM instability existing in the edge region of the EDA H-mode plasmas. △ Less

Submitted 9 February, 2024; originally announced February 2024.

Comments: 28 pages, 15 figures, 1 table

First data and preliminary experimental results from a new Doppler Backscattering system on the MAST-U spherical tokamak

Authors: P. Shi, R. Scannell, J. Wen, Z. B. Shi, C. Michael, T. Rhodes, V. H. Hall-Chen, Z. C. Yang, M. Jiang, W. L. Zhong

Abstract: A new Doppler backscattering (DBS) system, consisting of Q-band and V-band, has been installed and achieved its first data on the MAST-U spherical tokamak. The Q-band and V-band have separate microwave source systems, but share the same optical front-end components. The Q-band and V-band sources simultaneously generate eight (34, 36, 38, 40, 42, 44, 46 and 48 GHz) and seven (52.5, 55, 57.5, 60, 62… ▽ More A new Doppler backscattering (DBS) system, consisting of Q-band and V-band, has been installed and achieved its first data on the MAST-U spherical tokamak. The Q-band and V-band have separate microwave source systems, but share the same optical front-end components. The Q-band and V-band sources simultaneously generate eight (34, 36, 38, 40, 42, 44, 46 and 48 GHz) and seven (52.5, 55, 57.5, 60, 62.5, 65 and 67.5 GHz) fixed frequency probe beams, respectively. These frequencies provide a large range of radial positions from the low-field-side edge plasma to the core, and possibly to the high-field-side edge, depending on the plasma conditions. The quasi-optical system consists of a remotely-tunable polarizer, a focusing lens and a remotely-steerable mirror. By steering the mirror, the system provides remote control of the probed density fluctuation wavenumber, and allow the launch angle to match the magnetic field. The range of accessible turbulence wavenumbers (k_θ) is reasonably large with normalized wavenumber k_θρ_s ranging from <0.5 to 9. The first data acquired by this DBS system is validated by comparing with the data from the other DBS system on MAST-U (introduced in Ref. [21]). An example of measuring the velocity profile spanning from the edge to the center in a high-density plasma is presented, indicating the robust capabilities of the integrated Q-band and V-band DBS systems. △ Less

Submitted 11 September, 2023; v1 submitted 1 September, 2023; originally announced September 2023.

Characterization of mesoscopic turbulent transport events with long-radial-range correlation in DIII-D H-mode plasmas

Authors: R. Hong, T. L. Rhodes, Y. Ren, P. H. Diamond, X. Jian, L. Zeng, K. Barada, Z. Yan, G. R. McKee

Abstract: A dimensionless collisionality scan has been performed in H-mode plasmas on DIII-D tokamak, with detailed measurements of intermediate-to-high wavenumber turbulence using Doppler backscattering systems. It is found that the shorter wavelength turbulence develops into spatially asymmetric turbulent structures with a long-radial-range correlation (LRRC) in the mid-radius region of high-collisionalit… ▽ More A dimensionless collisionality scan has been performed in H-mode plasmas on DIII-D tokamak, with detailed measurements of intermediate-to-high wavenumber turbulence using Doppler backscattering systems. It is found that the shorter wavelength turbulence develops into spatially asymmetric turbulent structures with a long-radial-range correlation (LRRC) in the mid-radius region of high-collisionality discharges. Linear \textsc{cgyro} simulations indicate that the underlying turbulence is likely driven by the electron-temperature-gradient (ETG) mode. The LRRC transport events are highly intermittent and show a power spectrum of \(S_{\tilde{n}}(k_\perp) \propto k^{-1}_\perp\) for density fluctuations, which is often associated with self-organized criticality. The magnitude and the radial scale of those turbulent structures increase significantly when the $E_{r}\times B$ mean flow shearing rate decreases. The enhanced LRRC transport events appear to be correlated with the degraded energy confinement time. The emergence of such LRRC transport events may serve as a candidate explanation for the degrading nature of \emph{H}-mode core plasma confinement at high collisionality. △ Less

Submitted 28 February, 2023; originally announced March 2023.

Journal ref: Physics of Plasmas 30, 072512 (2023)

A novel Doppler backscattering (DBS) system to simultaneously monitor radio frequency plasma fluctuations and low frequency turbulence

Authors: S. Chowdhury, N. A. Crocker, W. A. Peebles, T. L. Rhodes, L. Zeng, B. Van Compernolle, M. Brookman, R. I. Pinsker, C. Lau

Abstract: A novel quadrature Doppler Backscattering (DBS) system has been developed and optimized for the E-band (60-90GHz) frequency range using either O-mode or X-mode polarization in DIII-D plasmas. In general, DBS measures the amplitude of density fluctuations and their velocity in the lab frame. The system can simultaneously monitor both low-frequency turbulence (f < 10MHz) and radiofrequency plasma de… ▽ More A novel quadrature Doppler Backscattering (DBS) system has been developed and optimized for the E-band (60-90GHz) frequency range using either O-mode or X-mode polarization in DIII-D plasmas. In general, DBS measures the amplitude of density fluctuations and their velocity in the lab frame. The system can simultaneously monitor both low-frequency turbulence (f < 10MHz) and radiofrequency plasma density fluctuations over a selectable frequency range (20-500 MHz). Detection of high-frequency fluctuations has been demonstrated for low harmonics of the ion cyclotron frequency (e.g., 2fci~23MHz) and externally driven high-frequency helicon waves (f = 476MHz) using an adjustable frequency down conversion system. Importantly, this extends the application of DBS to a high-frequency spectral domain while maintaining important turbulence and flow measurement capabilities. This unique system has low phase noise, good temporal resolution (sub-millisecond) and excellent wavenumber coverage (k_θ ~ 1-20cm^{-1} and k_r ~ 20-30cm^{-1}). As a demonstration, localized internal DIII-D plasma measurements are presented from turbulence (f <= 5MHz), Alfvenic waves (f~6.5MHz), ion cyclotron waves (f >= 20MHz) as well as fluctuations around 476MHz driven by an external high-power 476 MHz helicon wave antenna. In the future, helicon measurements will be used to validate GENRAY and AORSA modeling tools for prediction of helicon wave propagation, absorption and current drive location for the newly installed helicon current drive system on DIII-D. △ Less

Submitted 6 February, 2023; originally announced February 2023.

Comments: 13 pages, 14 figs, journal paper

Effect of mismatch on Doppler backscattering in MAST and MAST-U plasmas

Authors: Valerian H. Hall-Chen, Felix I. Parra, Jon C. Hillesheim, Juan Ruiz Ruiz, Neal A. Crocker, Peng Shi, Hong Son Chu, Simon J. Freethy, Lucy A. Kogan, William A. Peebles, Quinn T. Pratt, Terry L. Rhodes, Kevin Ronald, Rory Scannell, David C. Speirs, Stephen Storment, Jonathan Trisno

Abstract: The Doppler backscattering (DBS) diagnostic, also referred to as Doppler reflectometry, measures turbulent density fluctuations of intermediate length scales. However, when the beam's wavevector is not properly aligned perpendicular to the magnetic field, the backscattered power is attenuated. In previous work, we used beam tracing and reciprocity to derive this mismatch attenuation quantitatively… ▽ More The Doppler backscattering (DBS) diagnostic, also referred to as Doppler reflectometry, measures turbulent density fluctuations of intermediate length scales. However, when the beam's wavevector is not properly aligned perpendicular to the magnetic field, the backscattered power is attenuated. In previous work, we used beam tracing and reciprocity to derive this mismatch attenuation quantitatively. In this paper, we applied our model, in the small but finite mismatch limit, to a several new cases. We compared our predictions with multiple O-mode channels for the first time. We then identified a $\sim 3^{\circ}$ error in the MAST Q-band's quasioptics, showing that our model is useful for commissioning DBS diagnostics. For both O- and X-mode, we compared experimental data with our model's predictions at multiple times during the shots, unlike our previous work, where only a single time was analysed. Finally, we analysed other contributions to the backscattered signal, evaluating how much they affect our measurements of mismatch attenuation, giving comparisons with data from both MAST and MAST-U. This paper's detailed study systematically validates and demonstrates the usefulness of our model for quantitatively interpreting DBS data from spherical tokamaks. △ Less

Submitted 5 June, 2024; v1 submitted 30 November, 2022; originally announced November 2022.

Validating and optimising mismatch tolerance of Doppler backscattering measurements with the beam model

Authors: Valerian H. Hall-Chen, Julius Damba, Felix I. Parra, Quinn T. Pratt, Clive A. Michael, Shi Peng, Terry L. Rhodes, Neal A. Crocker, Jon C. Hillesheim, Rongjie Hong, Shikang Ni, William A. Peebles, Ching Eng Png, Juan Ruiz Ruiz

Abstract: We use the beam model of Doppler backscattering (DBS), which was previously derived from beam tracing and the reciprocity theorem, to shed light on mismatch attenuation. This attenuation of the backscattered signal occurs when the wavevector of the probe beam's electric field is not in the plane perpendicular to the magnetic field. Correcting for this effect is important for determining the amplit… ▽ More We use the beam model of Doppler backscattering (DBS), which was previously derived from beam tracing and the reciprocity theorem, to shed light on mismatch attenuation. This attenuation of the backscattered signal occurs when the wavevector of the probe beam's electric field is not in the plane perpendicular to the magnetic field. Correcting for this effect is important for determining the amplitude of the actual density fluctuations. Previous preliminary comparisons between the model and Mega-Ampere Spherical Tokamak (MAST) plasmas were promising. In this work, we quantitatively account for this effect on DIII-D, a conventional tokamak. We compare the predicted and measured mismatch attenuation in various DIII-D, MAST, and MAST-U plasmas, showing that the beam model is applicable in a wide variety of situations. Finally, we performed a preliminary parameter sweep and found that the mismatch tolerance can be improved by optimising the probe beam's width and curvature at launch. This is potentially a design consideration for new DBS systems. △ Less

Submitted 30 September, 2022; originally announced September 2022.

Observation of Long-Radial-Range-Correlation in Turbulence in High-Collisionality High-Confinement Fusion Plasmas

Authors: R. Hong, T. L. Rhodes, P. H. Diamond, Y. Ren, L. Zeng, X. Jian, K. Barada, G. Wang, W. A. Peebles

Abstract: We report on the observation of spatially asymmetric turbulent structures with a long radial correlation length in the core of high-collisionality H-mode plasmas on DIII-D tokamak. These turbulent structures develop from shorter wavelength turbulence and have a radially elongated structure. The envelope of turbulence spans a broad radial range in the mid-radius region, leading to streamer-like tra… ▽ More We report on the observation of spatially asymmetric turbulent structures with a long radial correlation length in the core of high-collisionality H-mode plasmas on DIII-D tokamak. These turbulent structures develop from shorter wavelength turbulence and have a radially elongated structure. The envelope of turbulence spans a broad radial range in the mid-radius region, leading to streamer-like transport events. The underlying turbulence is featured by intermittency, long-term memory effect, and the characteristic spectrum of self-organized criticality. The amplitude and the radial scale increase substantially when the shearing rate of the mean flow is reduced below the turbulent scattering rate. The enhanced LRRC transport events are accompanied by apparent degradation of normalized energy confinement time. These findings constitute the first experimental observation of long-radial-range turbulent transport events in high-collisionality H-mode plasmas, and demonstrate the role of mean shear flows in the formation and propagation of turbulence with long-radial-range correlation. △ Less

Submitted 15 February, 2023; v1 submitted 20 February, 2022; originally announced February 2022.

Ray-tracing Analysis for Cross-polarization Scattering Diagnostic on MAST-Upgrade Spherical Tokamak

Authors: R. Hong, T. L. Rhodes, G. Wang, W. A. Peebles

Abstract: A combined Doppler backscattering/cross-polarization scattering (DBS/CPS) system is being deployed on MAST-U, for simultaneous measurements of local density turbulence, turbulence flows, and magnetic turbulence. In this design, CPS shares the probing beam with the DBS and uses a separate parallel-viewing receiver system. In this study, we utilize a modified GENRAY 3D ray-tracing code, to simulate… ▽ More A combined Doppler backscattering/cross-polarization scattering (DBS/CPS) system is being deployed on MAST-U, for simultaneous measurements of local density turbulence, turbulence flows, and magnetic turbulence. In this design, CPS shares the probing beam with the DBS and uses a separate parallel-viewing receiver system. In this study, we utilize a modified GENRAY 3D ray-tracing code, to simulate the propagation of the probing and scattered beams. The contributions of different scattering locations along the entire beam trajectories are considered, and the corresponding local $\tilde{\mathbf{B}}$ wavenumbers are estimated using the wave-vector matching criterion. The wavenumber ranges of the local $\tilde{\mathbf{B}}$ that is detectable to the CPS system are explored for simulated L- and H-mode plasmas. △ Less

Submitted 20 May, 2021; originally announced May 2021.

Journal ref: Rev Sci Instrum 92, 063505 (2021)

Observation of quasi-coherent density fluctuation in scrape-off layer enhancing boundary transport in high-betaN hybrid plasmas on DIII-D

Authors: R. Hong, T. L. Rhodes, Z. Y. Li, H. Wang, L. Zeng, K. Barada, G. Wang, J. G. Watkins, W. A. Peebles

Abstract: We report the observation of a quasi-coherent density fluctuation (QCF) by the Doppler backscattering system in the scrape-off layer (SOL) region of the DIII-D tokamak. This QCF is observed in high-power, high-performance hybrid plasmas with near double-null divertor (DND) shape during the electron cyclotron heating period. This mode is correlated with a steepened SOL density profile and leads to… ▽ More We report the observation of a quasi-coherent density fluctuation (QCF) by the Doppler backscattering system in the scrape-off layer (SOL) region of the DIII-D tokamak. This QCF is observed in high-power, high-performance hybrid plasmas with near double-null divertor (DND) shape during the electron cyclotron heating period. This mode is correlated with a steepened SOL density profile and leads to significantly elevated particle and heat fluxes between ELMs. The SOL QCF is a long-wavelength ion-scale fluctuation and propagates in the ion diamagnetic direction in the plasma frame. Its radial expanse is about 1.5-2 cm, well beyond the typical width of heat flux on DIII-D. Also, the SOL QCF does not show any clear dependence on the effective SOL collisionality and thus may raise issues on the control of plasma-material interactions in low collisionality plasmas in which the blob-induced transport is reduced. A linear simulation using BOUT++ with a 5-field reduced model is performed and compared with experimental observations. In simulation results, an interchange-like density perturbation can be driven by the SOL density gradient, and its peak location and the radial width of the density perturbation are in agreement with the experimental observations. △ Less

Submitted 19 March, 2021; v1 submitted 10 November, 2020; originally announced November 2020.

The deteriorating effect of plasma density fluctuations on microwave beam quality

Authors: Alf Köhn, Max E. Austin, Michael W. Brookman, Kenneth W. Gentle, Lorenzo Guidi, Eberhard Holzhauer, Rob J. La Haye, Jarrod B. Leddy, Omar Maj, Craig C. Petty, Emanuele Poli, Terry L. Rhodes, Antti Snicker, Matthew B. Thomas, Roddy G. L. Vann, Hannes Weber

Abstract: Turbulent plasma edge density fluctuations can broaden a traversing microwave beam degrading its quality. This can be a problem for scenarios relying on a high spatial localization of the deposition of injected microwave power, like controlling MHD instabilities. Here we present numerical estimations of the scattering of a microwave beam by density fluctuations over a large parameter range, includ… ▽ More Turbulent plasma edge density fluctuations can broaden a traversing microwave beam degrading its quality. This can be a problem for scenarios relying on a high spatial localization of the deposition of injected microwave power, like controlling MHD instabilities. Here we present numerical estimations of the scattering of a microwave beam by density fluctuations over a large parameter range, including extrapolations to ITER. Two codes are used, the full-wave code IPF-FDMC and the wave kinetic equation solver WKBeam. A successful comparison between beam broadening obtained from DIII-D experiments and corresponding full-wave simulations is shown. △ Less

Submitted 24 May, 2018; originally announced May 2018.

Comments: EPJ Web of Conferences, EC-20 2018 Proceedings, submitted

Resolving ECRH deposition broadening due to edge turbulence in DIII-D by heat deposition measurement

Authors: Michael W Brookman, Matthew B Thomas, Jarrod Leddy, C Craig Petty, Robert J La Haye, K Barada, Terry L Rhodes, Zheng Yan, Max E Austin, Roddy G L Vann

Abstract: Interaction between microwave power, used for local heating and mode control, and density fluctuations can produce a broadening of the injected beam, as confirmed in experiment and simulation. Increased power deposition width could impact suppression of tearing mode structures on ITER. This work discusses the experimental portion of an effort to understand scattering of injected microwaves by turb… ▽ More Interaction between microwave power, used for local heating and mode control, and density fluctuations can produce a broadening of the injected beam, as confirmed in experiment and simulation. Increased power deposition width could impact suppression of tearing mode structures on ITER. This work discusses the experimental portion of an effort to understand scattering of injected microwaves by turbulence on the DIII-D tokamak. The corresponding theoretical modeling work can be found in M.B. Thomas et. al.: Submitted to Nuclear Fusion (2017)[Author Note - this paper to be published in same journal]. In a set of perturbative heat transport experiments, tokamak edge millimeter-scale fluctuation levels and microwave heat deposition are measured simultaneously. Beam broadening is separated from heat transport through fitting of modulated fluxes. Electron temperature measurements from a 500 kHz, 48-channel ECE radiometer are Fourier analyzed and used to calculate a deposition-dependent flux. Consistency of this flux with a transport model is evaluated. A diffusive and convective transport solution is linearized and compared with energy conservation-derived fluxes. Comparison between these two forms of heat flux is used to evaluate the quality of ECRF deposition profiles, and fitting finds a significant broadening of 1D equilibrium ray tracing calculations from the benchmarked TORAY-GA ray tracing code is needed. The physical basis, cross-validation, and application of the heat flux method is presented. The method is applied to a range of DIII-D discharges and finds a broadening factor of the deposition profile width which scales linearly with edge density fluctuation level. These experimental results are found to be consistent with the full-wave beam broadening measured by the 3D full wave simulations in the same discharges. △ Less

Submitted 10 October, 2017; originally announced October 2017.

Comments: 21 Pages, 9 Figures

Rheology of Attractive Emulsions

Authors: Sujit S. Datta, Dustin D. Gerrard, Travers S. Rhodes, Thomas G. Mason, David A. Weitz

Abstract: We show how attractive interactions dramatically influence emulsion rheology. Unlike the repulsive case, attractive emulsions below random close packing, RCP, can form soft gel-like elastic solids. However, above RCP, attractive and repulsive emulsions have similar elasticities. Such compressed attractive emulsions undergo an additional shear-driven relaxation process during yielding. Our results… ▽ More We show how attractive interactions dramatically influence emulsion rheology. Unlike the repulsive case, attractive emulsions below random close packing, RCP, can form soft gel-like elastic solids. However, above RCP, attractive and repulsive emulsions have similar elasticities. Such compressed attractive emulsions undergo an additional shear-driven relaxation process during yielding. Our results suggest that attractive emulsions begin to yield at weak points through the breakage of bonds, and, above RCP, also undergo droplet configurational rearrangements. △ Less

Submitted 12 January, 2012; originally announced January 2012.

Journal ref: Physical Review E 84, 041404 (2011)